eChapters

The earlier view was that the cultivated sesame originated from Ethiopia. But Bedigian and Harlen (1984) established evidence to indicate that sesame is native of India. In vedic period, liberal mention about Til (Gingelly seed) and Taila (Gingelly oil) are mentioned. The Charred seeds of Gingelly were extracted from Harappa (2500-1500 B.C).

The current study focused to investigate the significance of AgNOR count in diagnosis of canine mammary tumour and its correlation with histopathological evaluation. A total of 53 cases suspected for canine mammary tumour were presented to Veterinary Clinical Complex, DUVASU Mathura from January 2021 to April 2022, out of these 42 cases were screened as neoplastic while 11 were non- neoplastic based on cytological examination. 24 tissue samples were collected out of 42 neoplastic cases during surgical procedure under general anaesthesia for further detailed examination by the approval of Institutional Animal Ethics Committee vide application number IAEC/22/22. AgNOR staining revealed that carcinoma solid had highest number of AgNOR followed by malignant myoepithelioma and fibrosarcoma. AgNOR count gives an assessment of cell kinetics and is directly related to proliferative activity of cells.

To set up of an X–ray (radiology) section following points should be considered while planning:
 
    1.    Anticipated present work load (number of cases and species of animals to be X-rayed) and future requirement in the next 10-15 years.
    2.    Financial resources available.
    3.    Type of equipment to be installed for radiographic work.
    4.    Requirement of radiation safety enforcing agencies e.g. of Bhaba Atomic Research Centre, Mumbai.
The overall set up of radiology section should consider the following requirements:

The research locale is a crucial aspect of any research study because it can have a significant impact on the data collected, the results obtained, and the conclusions drawn from the research. The selection of the research locale should be based on the research questions, objectives, and methodology of the study. The characteristics of the research locale such as its physical, social, cultural, and economic attributes, and the population being studied, can affect the research outcomes.

To accurately understand and interpret the data, used in social science research, it is necessary to have a thorough understanding of the attitude, behaviour and characteristics of the individuals who live in the area being studied. This section of the research critically examines the socio-demographic background of local people in a rural setting. The research setting refers to the context in which the research is conducted, and it plays a crucial role in shaping the interplay of different factors and components that influence the study’s outcomes. The research setting is essential because it provides a contextual framework that helps to inform the researcher’s interpretation of the data. By understanding the characteristics and context of the research area, the researcher can more accurately conceptualize and interpret the data, leading to a more nuanced understanding of the implications and behavioural complexities of the individual and the larger community.

Introduction

Research setting is basically a functional social ecology along with research objectives and condition wherein all possible socio-economic and communication processes are generated, and again gets regenerated. The researcher seeks to throw a spotlight on the implications and behavioral patterns of people who reside in the subject region and who are usual of the greater community. In this chapter, an in-depth review of the socio-demographic background of the local population in a rural setting has been provided.

4.1. Area of the study

The present research study was taken up in two states, Tamil Nadu and West Bengal.

3.1 Introduction

In developing and in semi-developed countries, rural-urban migration is driven by the uneven distribution of employment, income-opportunities etc. (Skeldon, 1990). Rapid population growth, especially in rural areas, provides an important demographic backdrop to these rural-urban population shifts. Given the growing and well-known difficulties that are faced by the overall Indian population in f inding productive employment, it is important to study the characteristics of labors that migrate from rural-urban areas. Under this backdrop, attempts have been made in this study to examine the nature, pattern and determinants of rural urban migration and the spread of urban informal sector and the likely impact of rural-urban migration on agricultural productivity and efficiency.

2.1 Setting Business Goals and Objectives

Well-chosen goals and objectives point a new business in the right direction and keep an established company on the right track. When establishing goals and objectives, try to involve everyone who will have the responsibility of achieving those goals and objectives after you lay them out. To help you better understand how you can set goals and objectives, you first need a good foundation for what the two are.

Goals establish where you intend to go and tell you when you get there. They help improve your overall effectiveness as a company — whether you want to increase your share of the market, for example, or improve your customer service. The more carefully you define your goals, the more likely you are to do the right things and achieve what you wanted to accomplish in the first place.

Objectives are the specific steps you and your company need to take in order to reach each of your goals. They specify what you must do — and when.

Most of ultrasound machines are designed for imaging with a particular resolution linear and convex transducers. These machines can be used for general purpose for abdominal, obstetrics, gynecological, small parts, urology and cardiac applications. Most of the machines have standard measurement software viz. distance, area, volume, circumference, and obstetrical gestational age measurement for BPD, HC, AC, FL, GS, CRL, AD and FW.

Assessment of probes: One should examine the probe whether it is linear array or curved (convex) array. The probe should also be checked for its frequency. These days multi-frequency probes are supplied with the ultrasound-machine. These multiple frequencies could be 2.0 to 5.0 MHz with centrally fixed frequency of 3.5 MHz. The frequencies could be 4.0 to 7.0 (5.0 MHz setting), 5.0 to 9.0 MHz (7.5 MHz setting). The area and depth covered by various frequencies should be known.

Before setting the ultrasound machine, one should make sure of all the auxiliary devices for the machines. These are Thermal video printer, Ultrasound gel, Biopsy needle, image saving devices (USB device or internal saving mechanism), wire, Uninterrupted Power Supply etc.

Identifying and knowing the main system: One should note down the name and model of ultrasound machine as these are quoted in all the documents published with the ultrascan images generated on that particular machine. It is written on one side of front panel. On the front panel, there are various knobs for proper setting. One should locate the auxiliary power switch of the machine to begin with. Generally, there is power indicator on the machine that shows light on when power button is pushed to on position. The auxiliary power switch may also have indications of its ON and OFF positions, may be marked with 0 and 1 or other symbols. As shown in the figure below, there are various operating buttons on the operating panel. These might vary from Machine to Machine.

Selection of site for a poultry farm: The following points should be considered while selecting site or location for a poultry farm.

The farm should be located at an elevated area with proper facilities for drainage.

To protect the farm against strong wind, tall trees may be planted surrounding the farm complex.

The farm should be located not too far from city to bring in and take out materials.

The commercial farm should be located near to marketing centres.

The breeder farm should be located in an isolated area away from commercial farm to ensure biosecurity.

The farm should have an easy access to connecting roads.

The site should have provision of electricity.

The desirable soil type for a poultry farm is loamy or sandy loam.

There should be provision of abundant potable water at the site. The water should be tested for various impurities like total solids, microbiological contamination, high percentage of salts of Na, K and Chlorine, nitrite, nitrate etc. Total bacterial count and Coliform count should be 0/ml.

The seven basic tools of quality control are practical graphical techniques used to identify, analyse and resolve manufacturing problems systematically. Associated with Japanese quality expert Kaoru Ishikawa, they can be applied by employees at different organizational levels. In textile and apparel production, these tools support defect tracking, process control, waste reduction and buyer compliance. They consist of the cause-and-effect or fishbone diagram, check sheet, control chart, histogram, Pareto chart, scatter diagram and flow chart. Together, they help collect and organize information, reveal patterns, identify major sources of defects, investigate relationships between variables, map processes and determine root causes, thereby supporting evidence-based corrective action and continual improvement.

The seven basic tools of quality control are practical graphical techniques used to identify, analyse and resolve manufacturing problems systematically. Associated with Japanese quality expert Kaoru Ishikawa, they can be applied by employees at different organizational levels. In textile and apparel production, these tools support defect tracking, process control, waste reduction and buyer compliance. They consist of the cause-and-effect or fishbone diagram, check sheet, control chart, histogram, Pareto chart, scatter diagram and flow chart. Together, they help collect and organize information, reveal patterns, identify major sources of defects, investigate relationships between variables, map processes and determine root causes, thereby supporting evidence-based corrective action and continual improvement.

Sex determination is one of the first aspects of nematode biology to be systematically characterized with genetic analysis and the depth of this analysis has made it a major topic in developmental biology. It is both fair and interesting to ask how general the Caenorhabditis elegans model is likely to be, both for other nematodes as well as for animals in general. As nematodes employ many different reproductive strategies, often related to parasitic life histories, one might expect similarly variable sex determination mechanisms. However, comparative studies of sex determination based on the C? elgans model have revealed both rapidly evolving and surprisingly well conserved features (Haag, 2005). This mixture of old and new (or slow and fast), along with its obvious relevance to evolution, ecology, and applied fields like agricultural and medical parasitology, has made the evolution of nematode sex determination an increasingly active research area.

Sex Chromosomes

Sex can be considered at chromosomal, gonadal, phenotypic, and gender identity levels.

Human females are homogametic (XX) and males are heterogametic (XY).

The Y chromosome contains few identified genes, while the larger X chromosome contains several thousand genes. Pseudoautosomal regions at both tips of the Y chromosome contain genes that have counterparts on the X chromosome.

The male determining gene, SRY, has been found on the Y chromosome.

Sex hormone plays a vital role in the occurrence of canine mammary cancer. It is well established that canine mammary cancer is sex-hormone dependent. The risk of developing canine mammary tumour is 0.05% if the dog is spayed before its first estrous and the risk of developing a mammary cancer is increased as the number of estrous cycle increases. Mammary cancer is often hormone responsive, since growth or regression of tumours can be modulated by suitable hormonal manipulations. Estrogen and Progesterone appear to be major hormones in regulation of mammary tumour development. It is also reported that about 40-50% malignant mammary tumour in the dog have either or both estrogen and progesterone receptors. Benign tumours in dogs have also female sex hormone receptors and they can be stimulated by hormonal cycling. Mammary carcinoma can be induced in male and female rodents by administration of estrogen. Transsexual males given high doses of estrogen to induce mammary development have developed mammary cancer. So measurement of different sex hormones or sex steroids is an essential step during any study related to development and efficacy of treatment of canine mammary cancer.

Some traits are carried on the sex chromosomes, X and Y. Most traits carried are present on only the X-chromosome. The Y-chromosome is smaller, and so, very few genes are located on this chromosome. Sex traits can be categorized into three types of inheritance:
Sex limited,
Sex-linked, and
Sex-influenced.
Sex-limited traits are traits that are visible only within one sex. For instance, barred colouring in chickens normally is visible only in the roosters. Sex-linked traits would be considered traits like sickle cell anemia and colour blindness. They are said to be linked because more males (XY) develop these traits than females (XX). This is because the females have a second X gene to counteract the recessive trait. Thus, the trait is more likely to be visible in the male.
Sex Influenced Inheritance
The condition in which the same gene acts as dominant in one sex and recessive in other sex is called as sex influenced dominance. That is, the sex influences the gene either to be dominant or recessive. The sex influenced genes are present in autosomes. This differential behaviour of the gene is due to female and male sex hormones. For example, in human being baldness is due to sex influenced gene. This trait is dominant in men and recessive in women. A man is bald in homozygous recessive as well on heterozygous condition for baldness. Whereas women exhibit baldness only in homozygous recessive condition for baldness and heterozygous condition for baldness in female sex produce normal phenotype. HN, HN -Normal female and normal male

Sexual behavior

The pattern of courtship, display, motor activities and postures are directed to bring the male and female gametes together to ensure fertilization and pregnancy. The components of copulatory patterns are sexual arousal, courtship (sexual display), erection, penile protrusion, mounting, intromission, ejaculation, dismounting and refractoriness. The duration of courtship and copulation varies with the species both events are shorter in cattle and sheep than in swine and horses. The males sniff and lick the genitalia of female are more common and an important way of chemical communication through olfaction. Except in swine, the males smell the female’s urine and then raise head, with lips curled, in the ritualized “Flehmen’s reaction”. In sheep, goat and cattle, tactile stimulation of the female is made by nuzzling and licking the perineal region, whereas with the horse, the stallion often bites the female’s neck and in swine, the boar noses her flanks.

• Sexual activity or mating behaviour is innate character of the males. Unlike the female animal, male animal has a nature of sexual receptivity permanently. • Male gonadal steroid androgen controls sexual behaviour. At regular interval of 2-4 hrs, there is secretion of testosterone which converts into estradiol due to aromatization. Due to this very frequent rise in estradiol level, male shows sexual behaviour permanently. In female animals, a rise in estradiol occurs only during estrous. • When in a group of animals, any female can be mated with any male, it is called promiscuous sexual behaviour. Sexual behaviour in some animals is according to their social structure and territorial/home range i.e. male and female share some of their home range for the purpose of mating e.g. Roe deer, Muntjak antelope etc. In some animals, both males and females share whole of their territory for the mating purpose called a harem e.g. wild rabbit. Some animals come into a temporary territory meant only for mating in breeding season e.g. seal.

The embryogenesis or embryonic development of a sexually reproducing multicellular animal is prefaced by the gametogenesis as ovum and sperms.

In some animals both kinds of gametes are produced by a single individual which is called monoecious or hermaphrodite.

But in majority of animals both kinds of gametes are produced by different individuals to an animal species are called dioecious.

The kind of sex cells as spermatozoa and ova; and those organs which are immediately concerned with their production i.e. male gonads called as testes and female gonads as ovaries form the primary sexual characters of each sex.

Besides these primary sexual characters the male and female sexes differ from each other in many somatic characters, which are called secondary sexual characters.

Such a phenomenon of morphological differentiation or specialization in secondary sexual characters between male and female individuals of a species is called sexual dimorphism. Sexes are generally separate in fishes and only a few species are hermaphrodite.