eChapters

30.1 Introduction

Sexual dimorphism is a condition in which sexes of the same species exhibit morphological differences that are not directly related to reproduction. It is a common and noticeable feature of the animal world. It is extremely important in biodiversity assessments, as well as in biometry, breeding biology, induced breeding, breeding, pheromone biology and other related fields.

MALE STERLITY, or failure to fertilize female egg cells, may be due to several causes. In some cases the trouble is due to an emotional factor, such as a mental block. It may be caused by an absence or atrophy of the testes, or perhaps by some obstruction in the male genital organs. Infections involving the 'genital organs may result in the production of unhealthy or even dead sperm cells. In such cases special tests may locate the seat of the trouble, which may be treated surgically.

FEMALE STERLITY, or failure to have children may arise from several different causes. Sometimes the trouble is due to the husband.

The ovum remains viable and capable of being fertilized after it is expelled from the ovary probably no longer than 24 hours. Therefore, sperm must be available soon after ovulation if fertilization is to take place. On the other hand, a few sperm can remain fertile in the female reproductive tract for up to 72 hours, although most of them for not more than 24 hours. Therefore fertilization to take place, intercourse usually must occur sometime between 1 to 2 days before ovulation and up to 1 day after ovulation

4.1 INTRODUCTION

The method of propagation in plants may be sexual or asexual. In sexual method of propagation, specialized reproductive cells called gametes are formed by the process of gametogenesis. Fusion of the male and female gametes leads to the development of an embryo and eventually the seed.

4.2 GAMETOGENESIS

The production of male and female gametes is known as gametogenesis. It occurs within microspores and megaspores. It involves only mitosis. It is of two types: (1) microgametogenesis and (2) megagametogenesis.

Sexual propagation through seeds is a fundamental method for producing horticultural crops, rootstocks, and planting material. This chapter explains seed structure, quality, viability, dormancy, germination, and factors affecting successful seedling establishment. Different types of seed dormancy and methods for overcoming dormancy are discussed, including scarification, stratification, chemical treatments, temperature management, and appropriate moisture conditions. Seed testing and quality considerations are important for obtaining uniform and healthy plants. The chapter also emphasizes the influence of temperature, oxygen, water, light, and substrate conditions on germination. Understanding seed biology enables students and growers to produce vigorous seedlings and establish reliable nursery and crop-production systems.

Description and Distribution
Shallot belongs to the onion and garlic family and is similar in properties to those of garlic. It is a native of Palestine and is cultivated in the USA, some European countries and in Indian gardens for its bulbs and green leaves. Clusters of greenish-white or red cloves occur at the base of its hollow cylindrical leaves. A variety of Shallot, smaller and with larger number of cloves, is exported to Sri Lanka and Malaysia from Chennai, in Tamil Nadu, India.
Economic Importance
Shallot is gradually gaining importance, as is seen from the export of the same from India during 1994-95. There is much scope for its export development provided its cultivation is stepped up gradually. The encouraging export performance during 1994-95 can be seen from the following table (Table 19).

Morphological characteristics

It is an annual/perennial herb with prostrate spreading branches in all directions. The root system is deep. Leaflets are 2.5-5 cm long, elliptical, oblong and rounded at base. Leaves are densely clothed with white appressed and long spreading hairs. In nature, seedlings appear after 2-3 showers during July-August. Generally, the seedlings are abundant under the canopy of trees or shrubs. The young seedling grows straight and produces lateral branches during first week of August. The lateral branches spread in all directions. The flowering starts during first week of August. Fruit formation takes place in the last week of August, while flowering still continues. The dispersal of the seeds takes place from September to December. Plant dries during November-December.

Floral characteristics

Flowers are blue in colour and axillary in position. They are either solitary or in pairs on the long stalk. Styles are two and each is bifid. Fruit is globose with four-valved capsule containing dark brown to black smooth seeds. The flower colour varies from dark purple to whitish-purple.

Distribution

Plant is commonly found growing in open and grassy places, almost throughout India, ascending upto 1500 meter in the Himalayas. It is cultivated also in the sub-tropical parts of India, ascending upto 1800 meter elevation.

Introduction

Shaping machine, shaping machine is a heavy commercial machine used for generating flat surfaces on the workpiece as per the requirement. It is specifically designed to give the desired shape to the workpiece which can be flat, horizontal, or vertical as per the requirement.

The shaper machine is a reciprocating type of machine (that is, the machine that converts the rotatory motion into the linear motion) in which the tool reciprocates with the forward and backward stroke removing the metal form of metal chips and turning the Metal workpiece into the desired shape.

India’s Northeast region — one of natural beauty and cultural richness — is both a mega-biodiversity area as well as a “hot-spot” for genetic erosion. The rural population is around 82 per cent and depends largely on agriculture and allied sectors for work and income security. The forests harbour 8000 out of the 15,000 species of flowering plants occurring in the country. Of about 1300 species of orchids reported from India, the Northeast has the highest concentration with about 700 species. The species richness is highest in Arunachal Pradesh where over 5000 flowering plants occur and the lowest in Tripura with 1600 species. Bamboo is the lifeline of the Northeast and 63 out of 136 species found in India occur in this region. Sadly, however, 25 species of bamboo fall under the rare and endangered category. The region is also home to the eri and muga silkworms. The yak and the mithun are unique animals which are threatened by the spread of non-edible invasive species like Lantana, Eupatorium and Mekenia. The cultural diversity of this region is well known, with 225 tribes out of 450 in the country living here. 

Summary

Reaching large-scale implementation should be the overriding objective of all projects that have successfully ISFM practices to share provide markets support them. All too often ISFM results are only reported in peer-reviewed journals that are not accessible outside the research community.
 
Funding agencies often fail to make the production of extension materials an integral and mandatory requirement of research projects.
Unfortunately, in the past, adoption of economically proven technology has often been poor. Some of the reasons include:

When any beam is loaded, stresses are induced and so to calculate those stresses, shear force and bending moment acting at load or support location must be required to calculate.

7.1 Introduction

The practice of greenhouse management has become a crucial method for extending growing seasons, improving crop quality, and maximizing yield potential in modern agriculture. Shedding and ventilation are critical elements that determine the effectiveness of greenhouse operations. They are pivotal in creating a delicate ecology where plants can find shelter in a controlled environment that protects them from the elements while enabling exact changes to temperature, humidity, and light.

There are many migratory, semi-migratory and sedentary shepherd communities in India with sheep rearing along with goats as the main livelihood)Besides scores of land less wages-earning families keep small numbers of goats for crucial supplementary income. Sheep and goat farming, due to its quicker and better returns on investment provides an additional source of income to farmers who normally depend on crops for their livelihood) Thus these animals fit in ideally in a mixed farming system. In India, goats and sheep are mostly maintained under extensive system which includes migratory, transhumance, free range, grazing community pastures, stubbles of cropped lands supplemented with crop residues and tree-lopping. Although a number of management systems are in practices varying from region to region these may be conveniently divided in to extensive, Semiintensive and Intensive systems.

This chapter introduces the relationship between sheep breed, production system and the type and quality of wool produced. It classifies sheep into fine-wool, longwool, medium or crossbred, carpet-wool and hair breeds. Particular attention is given to Merino and Indian breeds such as Chokla, Magra, Marwari, Nali, Deccani, Gaddi, Rampur Bushair and Bhakarwal. The chapter also examines extensive, pastoral, mixed and intensive production systems and their influence on wool characteristics and economic value.

According to the karyotyping the domestic sheep (Ovis aries) has 54 chromosomes. The following is a brief summary of their chromosome composition:

Autosomes: There are one pair of sex chromosomes, 52 autosomes and three pairs of these autosomes are submetacentric (having a centromere slightly off centre), while the rest are acrocentric (with the centromere near one end).

Sex Chromosomes: The X chromosome is acrocentric and the Y chromosome varies from submetacentric to metacentric.

Important features

• According to the Food and Agriculture Organization Corporate Statistical (FAOSTAT) Database (2019) and database of the United Nations Food and Agriculture Organization, the top three countries by the number of heads of sheep were: China (163.48 million heads), India (74.26 million) and Australia (65.75 million). • India has second largest sheep population in the World.

• Sheep milk is an important product in the Near East and North Africa (9% of total milk production) and sub-Saharan Africa (4%).

• The countries with the most dairy sheep are China, Sudan, Turkey and Algeria (FAO).

• Major sheep milk producers are China, Turkey and Greece.

• More than half of the world’s sheep population is found in developing countries. Sheep are more prevalent than goats in cold climatic conditions. The major produce from Sheep production are milk, meat, skin, fibre and manure. However, most of the small-scale producers in developing countries raise sheep for meat or sale.

A lot of infrastructure in the form of sheep breeding or production facilities such as sheep breeding research stations with adequate number of animals have been established and research technologies generated. The research technologies generated have however not been fully adopted by State Animal Husbandry Departments in the field except in Jammu & Kashmir, Himachal Pradesh and Parts of Rajasthan because of artificial insemination under field conditions due to migratory and semi-migratory practices in sheep husbandry, illiteracy among sheep farmers, their prejudices and convictions and difficulties in the preservation and storage of ram semen and main power requirement.

There is need to study the factors associated with adoption and rejection of sheep rearing as a subsidiary occupation and to know the attitude and knowledge of rural people. So that measures could be suggested to bring greater adoption of sheep rearing. The present study was undertaken to reveal the knowledge and attitude of adopters and non-adopters towards sheep rearing with the identification of factors helping and hindering the adoption of sheep rearing enterprise.

This chapter deals with the review of problems, objectives, hypothesis, research methodology and summary of major findings and conclusions based upon them. In addition, recommendations have also been made to accelerate adoption of sheep rearing programme in the five villages of Block Rajouri, District Rajouri, Jammu and Kashmir.

The present study was conducted to measure the knowledge and attitude of rural people towards sheep rearing and to find out the factors responsible for adoption and rejection of sheep rearing. Suitable measures are therefore suggested to bring greater adoption of sheep rearing in the hills of Jammu & Kashmir.

Abstract

Sheep milk is one of the superior quality of dairy foods and it is also considered as nutritional powerhouse. The beneficial role of sheep milk results from its fatty acid, immunoglobulin and non-immune protein contents. Apart from different dairy products and functional foods; this milk is used in anti-ageing and cosmetic soap preparations. In India Sheep make a valuable contribution to the livelihood of the economically weaker sections of the society. In our country the major portion of sheep milk is consumed as fluid milk and in certain areas converted into ghee and dahi.

Synonyms : Variola ovine, ovine pox

Sheep pox causes a severe and highly contagious disease in sheep which is listed in group A disease of the OIE. It is defined as a malignant pox of sheep characterized by fever and generalized development of pock lesions. Lesions first appear as vesicles which later turn into pustules on the exposed parts of the body. There is high mortality rate in lambs.

Distribution :  The disease is in existence since very long in Asia and Europe. It is prevalent in many areas of middle East countries, Africa, Asia and  Mediterranean countries. There are lot of disease outbreaks in India around the year. European Union with the exception of occasional sporadic outbreak in eastern areas of Greece, U.S.A. and Australia are free from the disease.

Origin and Domestication of Sheep

The domesticated sheep belongs to phylum-Chordata, class-Mammalia, order- Artiodactyla, family - Bovidae, sub-family - Caprinae, genus - Ovis and species- aries. They are hollow horned, cloven-hoofed ruminants of relatively smaller size. Sheep plays an important role in Indian agrarian economy as it is having multi facet utilities like meat, wool, skin, manure and to some extent milk and transport also. Marginal and sub-marginal lands of arid and semi-arid tropics are well adapted by sheep. Among the different wild species, Asiatic (Ovis orientalis) species of mouflon is considered to be the ancestor of present day sheep. Sheep were domesticated by man at around 9000 BC. The reference of role of sheep in the economy of mankind is found in the history of civilization of Mesopotamia, Mohen-jo-Daro and Harappa in Northern India.

14.1 Introduction
The other topics of the metal forming are as listed below.
a. Stretch forming operation
b. Formability of sheet metal
c. Test methods
These topics are presented in this chapter.
14.2 Stretch Forming Operation
A sheet metal is simultaneously stretched and curved over a die during the stretch forming process to create big shaped parts. Stretch forming is done using a stretch press, where jaws are gripped firmly to fix a sheet metal along its edges. To stretch the sheet, the grasping jaws are individually coupled to a carriage that is drawn by a hydraulic or pneumatic force. A stretch form block, also known as a form die, is the tooling utilized in this procedure. It is a solid contoured piece that the sheet metal will be pressed against. The most common type of stretch press is vertically orientated with the form die situated on a press table , which will be elevated by a hydraulic ram into the sheet. Tensile stresses build and the sheet plastically deforms into a new shape when the form die is pressed into the firmly gripped sheet. The sheet is pulled horizontally around the form die by the gripping jaws of a horizontal stretch press, which mounts the form die sideways on a stationary press table

13.1 Introduction
Any metal that is shaped into thin, malleable sheets is called sheet metal. The sheets come in a variety of predetermined thicknesses, known as gauges, and are made of materials ranging from titanium to brass. Although sheets can vary in thickness from fractions of a millimeter to several inches, most are typically less than ¼ inch thick. In sheet metal forming, different techniques are used to exert force on a sheet of metal to plastically change it into the required shape and changing its geometry instead of removing any material. Because sheet metal can be bent or stretched into a wide range of intricate shapes, it can be used to create sophisticated structures that are both very strong and use little material. The most economical forming method available today for producing large quantities of parts is sheet metal forming. On the other end of the spectrum, it can be manually operated in metal workshops for small series items or fully automated in factories. It is a flexible, reliable, and superior process that produces precise metal parts with little material waste. Sheet metal forming components are everywhere in our daily lives, from metal cans to protective housing for hardware. Sheet metal process is an extensive cold working procedure that involves shearing, punching/cutting, folding, riveting, splicing, and moulding such as vehicle bodies using metal sheets that are typically less than 6mm in thickness.
13.2 Sheet Metal Characteristics
The characteristics of the sheet metal are as listed below.
i. Because of its ductility, sheet metal may be shaped into a wide variety of shapes without shattering or cracking.
ii. Because it allows the material to be bent, stretched, and stamped throughout the production process, its malleability is essential for manufacturing.
iii. Another crucial element is the thickness of the sheet metal, which can vary from incredibly thin to several centimeters. Typically, a gauge number is used to indicate the thickness of a sheet metal. A lower gauge number denotes a thicker material and a higher gauge number denotes a thinner material. Sheet metal can be used for a wide range of purposes, from heavyduty machinery parts to lightweight electronic enclosures.