eChapters

Slaughtering and dressing of different kinds of animals and birds is an age old practice. Initially slaughtering was done by cutting the throat or stabbing the throat or breast. But today’s world of progress and scientific evolution slaughter methods has undergone material changes. Scientifically there are two essentials of slaughtering i.e. humane slaughter to avoid unnecessary pain and sufferings to the animals and complete bleeding. Legislations require stunning of animals to render them unconscious before bleeding except in Jewish and Muslim slaughter. The animals subjected to slaughter must be clean which is generally achieved by cleaning. The premises and transportation vehicles should also be maintained in good hygienic and sanitary conditions. All the facilities required for slaughter animals and birds arranged well in advance. In commercial plants and export units, slaughtering and dressing is performed on overhead rails but for domestic use, booth and simple rails may serve the purpose due to low throughput. The requirements and systems of overhead rail are mentioned in chapter 1. Some of the requirements are listed in following table

Important by product from Rabbit are meat, wool, planner and skin. It can be made highly profitable if products are properly processed and marketed. Many rabbit products are wasted because people do not have enough knowledge about their processing. Rabbit farming is profitable preservation of its by-product.

Slaughtering: Know when and how.

Slaining: Familiar with how to remove skin and carcass preparation and processing. How the skin has to be processed into a product from the skin obtained.

Manure: Know how to collect and preserve it.

Important by product from Rabbit are meat, wool, fur and skin. It can be made highly profitable if products are properly processed and marketed. Many rabbit products are wasted because people do have not enough knowledge about processing.
 
Slaughtering: Know when and how.

Skinning

Familiar with how to remove skin and carcass preparation. How the skin has to be processed and how the products which can be obtained from skin.

Manure collection and preservation.

Slaughtering : It depends on demand, type of animal where meat is consumed more, it can be achieved in 2 methods.

Introduction
• Slaughtering of meat animals in way so as to effect minimum pain and suffering to animals is referred as humane slaughter
• Slaughtering method followed should inflict least stress and suffering to the animals
• There are acceptable and the unacceptable slaughtering methods and there is no ‘nice’ method to slaughter the food animals
• In advanced countries, common slaughtering method consists of two steps, stunning and bleeding
• Stunning is done to make animal unconscious and not to feel the pain during actual bleeding process which is followed next
• Exception of stunning-- Jewish and Muslim methods of slaughter
Stunning
Humane slaughter consists of stunning followed by sticking (bleeding). Stunning is the process of making the animal unconscious till it is slaughtered so that the pain suffered during actual act of slaughtering can be alleviated

Abstract

The present study deals with the slope instability analysis of a vulnerable stretch of 16 km between Pratapgarh road intersection and Mahabaleshwar town, which is a part of the state highway-72, Satara district, Maharashtra, India. The highway remains closed during the monsoon seasons, due to the recurrent instances of cut slope failures. So the present research work was conducted with an aim to study the reasons, extent and mechanism of the cut slope failures along the road sections as well as optimization of tools for the assessment of road cut stability of the area. The 16 km stretch was divided into seven vulnerable sections (M1; near Mahabaleshwar - M7; near Poladpur) based on the geological, geometrical and structural attributes. The slope forming mass primarily consists of laterite, weathered basalt and fresh jointed basalt, which are interbedded with red bole at some sections. Limit equilibrium, finite difference and finite element simulation were performed for seven cut slope sections, using similar geometries and material strength attributes for all the analyzing techniques. The assessment was carried out for both dry and saturated conditions to emulate the monsoons. The factor of safety yielded through the limit equilibrium method was the most conservative of all the tools; while the finite element method gave the least conservative figures in terms of factors of safety, being close to the field observations, the safety factor results of finite difference methods were between the limit equilibrium and finite element methods. The cut slope sections composed of weathered basalts and laterites (M1, M2, M3, M6) were found most vulnerable to failure during rains, while the sections composed of fresh jointed basalts (M4 & M5), though overall stable, are susceptible to planar and wedge failures.

The general distribution of density in the oceans is like a two layer ocean as shown in Fig.5.1 below. A layer of more or less uniform density (nearly vertical) near the surface called as isopycnal layer and a deeper layer of higher density below with sharp increase of density is called as pycnocline.

Abstract

The Himalayas of Himachal Pradesh is prone to landslides due to inherent geodynamic conditions, rainfall and anthropogeny. Besides multi-variate studies on the landslides of Himachal Pradesh, instrument based early warning system was attempted by taking Jhakri landslides as the test site. Various instruments viz; piezometer, vertical inclinometer, Rain gauge, etc. were installed and the paper discusses about the methodology adopted in the installation of the instruments and the observations made from the instruments. While Piezometer did not reveal much information, the Tiltmeter showed minor movements.

Fertilizers have played a pivotal role in enhancing food grain production in India especially after the introduction of high yielding and fertilizer responsive crop varieties during the green revolution era. However, there are certain problems associated with fertilizers because of their relatively low nutrient use efficiency (NUE) or nutrient uptake by crops. The fertilizer use efficiency is 30-50% for N, 15-20% for P, 70-80% for K and 8-10% for S. In case of micronutrients, the use efficiency is only 1-2%. The low NUE is typically the result of higher release rate of fertilizers than the absorption rate by plants, and/or transformation of fertilizers/ nutrients to forms that are not bioavailable to crops.

Application of N and P fertilizers at levels exceeding plant requirements due to low acquisition efficiency leads to significant environmental consequences in many parts of the world due to losses, such as nitrate (NO₃^-) leaching, NH₃ volatilization, and nitrous oxide (N₂O) emission. Excessive use of fertilizer N affects the groundwater. Similarly, excessive use of N and P fertilizers leads to surface runoff which in turn causes eutrophication in aquatic ecosystems. These negative environmental consequences associated with fertilizer inputs further emphasize the need of technological approaches to improve nutrient management in modern agriculture. As such, there is great need in developing innovative fertilizers to minimize the losses of nutrients and increase their efficiencies.

In addition, current agricultural activities contribute up to 20-30% to the annual atmospheric emissions of greenhouse gases (GHGs), such as methane (CH₄) and carbon dioxide (CO₂). Even higher contribution is being noted for N₂O (about 60%), which is a potent GHG and catalyst for stratospheric ozone depletion, with more than 300 times the global warming potential than CO₂. Its emission is closely related to mineral fertilizer input. High fertilization rates lead to N and P losses with negative impacts on atmospheric GHGs concentrations and water quality.

There is an urgent need to improve NUE in agricultural systems, and to manage biogeochemical cycles in a sustainable way. This includes the development and application of modern technology as alternatives to conventional fertilization. There is a need to reduce the use of fertilizers/nutrients in agricultural systems by increasing NUE. The recent development in smart fertilizer delivery systems including nanofertilizers or the new generation fertilizers is a good alternative to commercially available fertilizers to improve the NUE and enhance resource utilization. Smart fertilizers may be a solution to enhance food production and environmental quality.

The wind blows over the water, changing its surface into ripples and then to waves. Thus most of the normal waves are wind-driven. As waves grow in height, the wind pushes them along faster and higher. Sometimes waves can become unexpectedly strong and destructive. As waves enter shallow water, they become taller and slow down, eventually break on the shore.

12.1. Practice of SMEs in Africa-Critical Review

Previous studies in Kenya have focused on the role of entrepreneurship education in job creation, enterprise management and economic development (Simiyu, 2010; Mwangi, 2011; Warren, 2011); hardly any have addressed the process of delivering entrepreneurship education. Research provides new knowledge to guide educational practice, by making an initial foray into the teaching of entrepreneurship education in Kenya. The envisaged entrepreneurially empowered TTI graduate is a product of the training function. This book examines factors which affect implementation of entrepreneurship education programme in TTIs in Kenya. The variables investigated were teaching methods, assessment methods, teacher’s network, and availability of training resources. The findings show that teachers do not accord entrepreneurship education t he appropriate pedagogical approach that it deserves; they seem resigned to using ineffective traditional pedagogies. Meanwhile, the subject is inadequately resourced by TTI administrations. The results of this research invite the attention of entrepreneurship educators, practitioners and stakeholders to employ effective strategies for dev eloping entrepreneurial key competencies in TTI trainees.

The Committee on Economic Development has defined small business as one which satisfies two or more of the following criteria.

• Management is independent (usually the managers are owners).
• Capital is supplied and ownership is held by an individual or small group.
• The area of operation is mainly local. Workers and owners are in one home community. Markets need not be local.
• Relative size within the industry – the business is small when compared to the biggest in its field. The size of the top bracket varies greatly so that what might seem large in field would be definitely small in another.

Abstract

“Darjeeling Tea” as a global brand brings attention to the Darjeeling District and creates a global imaginary which obliterates the dark colonial history, existing exploitation of the workers and the natural resources of the region. The global brand name is protected under the certification trademarks which has a geographical indication. Thus only tea from the 87 tea plantations can be called Darjeeling Tea. There is an increasing trend towards Darjeeling Tea going organic and fairtrade. This trend is critiqued with questions of how green and fair can a monoculture plantation get. Within this imaginary, small farmers’ tea offers an alternative paradigm based on equity and diversity. This paper explores the alternative by highlighting the (United Development Organization) journey of a small farmers collective Mineral Spring SanjuktaVikashSanstha.

Small, medium, and large enterprises (SMEs and LEs) play a vital role in any economy by providing goods, services, and employment opportunities. Each category has unique characteristics, challenges, and significance within the economy. Value chains are integral to understanding how these enterprises operate and compete in the market. Enterprises in agriculture and allied sectors are classified based on investment, turnover, and scale of operation. These enterprises form the backbone of agri-based value chains, providing crucial support in production, processing, storage, marketing, and distribution.
Here’s an overview of SMEs, LEs, and their value chains:
Small Enterprises
Definition
• Typically have fewer than 50 employees.
• Annual revenue varies by country but is generally less than $10 million.
Characteristics
• Often family-owned or local businesses.
• Serve niche markets and local communities.
• Limited resources for marketing, technology, and personnel.
• Higher flexibility and capacity for innovation due to fewer bureaucratic hurdles.

Small millets and Pseudo cereals are staple food for millions of small and marginal farming community and household in developing and under developed countries. They are major source of fodder and feed material for livestock. They are nutritionally alike or superior to major cereal grains with additional advantage of proteins (gluten-free), enhanced fiber, lower glycemic index and bioactive phyto chemicals made them an appropriate balanced health food.

Small millets such as foxtail millet, proso millet, finger millet, barnyard millet, kodo millet, fonio millet, teff and little millet and pseudo cereals such as buckwheat,quinoa, amaranth and cockscomb and chia are the oldest crops and staple food for millions of people around the world. Small millets and pseudo cereals are the main source of fodder and feed material for livestock.

Small ruminants (goat and sheep) rearing are considered as natural farming based on two grounds, i.e., (i) their survival on natural resources and are climate resilient, (ii) out of pocket expenses are minimal (Nardone et al., 2004). These animals contributes as livelihood and income augmentation sources for resource poor farmers and immensely contributes by providing milk, meat, f iber, skin, and manure. Goat rearing is done for milk and meat, while sheep is reared mainly for wool and meat purposes and limited use of milk. Goat milk has very high demand globally because of its nutraceutical properties and easy digestibility than bovine milk (Clark et al., 2017), overcome problem of lactose intolerance (Pal et al., 2017), and its nutritionally similarity to human milk (Rai et. al., 2022).

The health benefits of goat milk such as anti-hypertensive, overcome dengue fever, probiotic, antioxidant, antimicrobial properties, and good for gut health are widely recognised by the researchers. The market price of goat milk is almost three times the price of cow milk in different parts of Asia highlighting its income augmentation potential form marginal and small farmers (Liang & Paengkoum, 2019).

Along with raw milk sales, India has an opportunity to expand the processing of goat milk into value-added products which might be highly competent in the international market (Devendra and Liang, 2012). The goat milk products which have export market are: frozen yoghurt, fortified or flavoredmilk, ice cream, butter milk, dried milk or condensed milk product, whey protein concentrate, ghee etc.

Indian hot arid zone which is about 12% of total geographical area of the landmass of 0.32 million km² has maximum covering in western Rajasthan i.e. 61% of the total area whereas the other areas in arid region are available in the states of Gujarat, Punjab, Haryana, Andhra Pradesh and Karnataka accounting for 20, 5, 4, 7 and 3% of hot arid area whereas the cold arid area of 8.4 million ha lies in the state of Jammu & Kashmir covering the Leh and Ladakh region.

The hot arid area is characterized by frequent droughts of 47% of frequency in the last century of moderate to severe nature. Due to higher occurrence frequency of droughts in this region of state, the livestock assumes great importance as a drought management measure as agriculture is at the mercy of rainfall pattern which is very uncertain in amount as well as distribution coupled with poor soil condition, higher evapotranspiration and higher wind velocity causing the soil erosion.

For arid region of Rajasthanthe general climatic conditions, topographical features and biotic factors do not encourage agricultural operations in the absence of extractive industry the peasantry has to fall upon animal husbandry as their main occupation. Rearing some of the finest breed of cattle, camel, sheep and goats known for their endurance making much use of the meagre feed resources which are grasses ,herbs, shrubs, tree leaves and cultivated feed and fodder crops. Livestock farming has some in built superiority over crop farming as far as growth; stability and resource conservation are concerned. On an average, the region experiences 3 years of drought in every 10 years. The natural forces constituting the soil-climatic complex, which conspire to reduce the crop productivity and cause instability in agricultural production, have much less impact on livestock farming. This is due to differences in the nutritive value of natural vegetation, which mainly sustains livestock.

A sample is said to be small sample if the sample size(n) is less than 30. Various small sample tests are: (i) t-test (ii) F-test

t-test performs the following tests for small sample(s).

1. To test the equality between a single sample mean and the assumed population mean.
2. To test the equality of two independent sample means.
3. To test the equality of two paired sample means.
4. To test the equality between sample correlation coefficient and the assumed population correlation coefficient

10.1 Introduction

The assumptions on which analysis of large samples is done generally do not hold well in case of small samples (n < 30). In case of large samples we had presumed that the random sampling distributions of statistics are approximately normal and further that the values obtained by sampling study are close to the population values and can be used in their place for the calculation of the standard error of the estimate. These assumptions do not hold well if the size of the samples may or may not be normally distributed and similarly it is not possible to substitute the mean or the standard deviation of a small sample in place of the parameter mean or standard deviation for the calculation of standard errors. Under such circumstances the analysis of small samples has to be done by techniques which are different from those applicable in case of large samples.