eChapters

Weeds can be defined as plants which are undesirable, persistent, damaging and interfere with growth of other crop plants thus affecting agriculture, natural resources and economy of the country. These plants influence the produce of farmers in several ways.

It is used in the control of bacterial leaf spots, blights, and cankers mostly on fruits crops and ornamentals. The Bordeaux mixture, however, can cause burning of leaves or russeting of fruit such as apples when applied in cool, wet weather. The phytotoxicity of Bordeaux is reduced by increasing the ratio of hydrated lime to copper sulfate. Copper is the only ingredient in the Bordeaux mixture that is toxic to pathogens and, sometimes, to plants, whereas the role of lime is primarily that of a “safener.”

The algae associated with the plants belongs to the Order Trentepohliales (Ulvophyceae, Chlorophyta). These are filamentous green algae parasitic to higher plants, generally causing minor diseases characterized by negligible leaf spots, but on certain crops, in moist environments, these algal diseases can cause economic injury to plant leaves, fruits, and stems (Nelson, 2008).

Plant viruses cause severe crop losses worldwide. Conventional control strategies, such as cultural methods and biocide applications have limited success at mitigating the impact of plant viruses.

Introduction

The mammary glands of female mammals secrete milk, a necessary food that is liquid and meets the newborn’s nutritional needs. All mammals consider milk to be a complete food for their newborns. It is considered a necessary food for humans and can be consumed as a product or as liquid milk. It contains almost all essential nutrients except iron, which is very low in milk. In essence, milk is an emulsion of protein and fat in water, supplemented with carbohydrates, vitamins, and minerals.

Definition of Milk

• Milk is a complex biological fluid that differs from species to species in both composition and physical properties. It is the full lacteal secretion of a mammary gland that is obtained by milking mammals for a minimum of 72 h after calving or until the milk is free from colostrum.

• FSSAI defines milk as the normal mammary secretion derived from the complete milking of healthy milch animals. It should be free from colostrum.

From a chemical perspective, milk is a dynamically balanced mixture that comes in different forms such as emulsion, colloidal suspension, and true solution. It also contains varying amounts of proteins, fats, carbohydrates, salts, and water.

Gross Composition of Milk

Milk composition varies among different mammals. The average chemical composition of milk in various species is given in Table 1. Buffalo milk and sheep milk contain higher amounts of fat, while human milk comparatively has the highest lactose content. Human milk has lower protein content as compared to milk of other species.

Sixteen chemical elements are known to be important for a plant growth, their metabolic activities and survival. These can be divided in to two main groups

Chemical oxygen demand (COD) is measurement of oxygen demand of waste in terms of the total quantity of oxygen required for oxidation of the waste to carbon dioxide and water. This test is based on the fact that all the organic compounds, with few exceptions, can be oxidized The test is based on the fact that all organic compounds, with a few exceptions, can be oxidized by the action of strong oxidizing agents under acid conditions. Organic matter + Oxidizing agent = CO2 + H2O. The major advantage of COD test is the short time required for evaluation. The determination can be made in about 3 hours rather than the 5-days required for the measurement of BOD
Principle
The oxidizing agents like potassium permanganate and potassium dichromate is usually used to determine COD. Potassium permanganate is selective in the reaction like it reacts with carbonaceous on the other hand it shows nonreactive with nitrogenous matter. Estimating of COD with any method, oxidizing agent must be present to ensure that organic matter is oxidized completely. The organic matter and oxidisable inorganic substances present in water or wastewater get oxidised completely by standard potassium dichromate (K2Cr2O7) in the presence of H2SO4 to produce CO2 + H2O.The excess K2Cr2O7 remaining after the reaction is titrated with ferrous ammonium sulphate [Fe(NH4)2 (SO4)2]. The dichromate consumed gives the 02 required for oxidation of the organic matter.

Salinity is a measure of the total concentration of dissolved solids, which is usually expressed in parts per thousand (ppt). Chloride, sulphate, bicarbonate, and bromide are anions (- charged). Cations that are positively charged are sodium, magnesium, calcium, potassium, and strontium. The main solids are sodium and chloride.

This chapter describes methods for evaluating soil reaction, salinity, organic matter and plant-available nutrients. It begins with soil pH and electrical conductivity, explaining their importance in nutrient availability and the identification of acidic, saline or alkaline conditions. Procedures are then provided for estimating organic carbon, available nitrogen, phosphorus, potassium and sulphur. The chapter also covers calcium, magnesium and micronutrients, including zinc, iron, copper, manganese, boron and molybdenum. Every method identifies the necessary apparatus and reagents and explains extraction, colour development, instrumental measurement, calculation and interpretation. Particular attention is given to calibration, sample preparation, reagent quality, contamination control and laboratory safe

This chapter introduces the chemical nature of wool as a keratin-based protein fibre rich in sulphur-containing amino acids. It examines keratin structure, peptide and disulphide bonds, amino-acid composition, amphoteric behaviour and reactions with acids, alkalis, oxidising and reducing agents. The chapter explains the chemical basis of dyeing, swelling, felting, shrinkage and finishing treatments. Understanding these properties is essential for controlling wool processing while preserving fibre strength, appearance and functional performance.

2.1. Classification of Fish

Fish are incredibly diverse aquatic vertebrates. There are over 32,000 de scribed species of bony fish, over 1,100 species of cartilaginous fish, and over 100 hagfish and lampreys. Fish can be broadly classified into three groups:

2.1.1. Superclass Agnatha (Jawless fish): These are the most primitive fish, lacking jaws and paired fins. They have existed for over 500 million years. Examples include lampreys and hagfish.

2.1.2. Class Chondrichthyes (Cartilaginous fish): These fish have skeletons made of cartilage instead of bone. They have jaws and paired fins. Examples include sharks, skates, and rays.

2.1.3. Superclass Osteichthyes (Bony fish): This is the largest and most diverse group of fish. They have skeletons made of bone and have jaws and paired fins. Examples include tuna, salmon, goldfish, and many more.

4.1. Classification

The class Aves, also known as birds, is a group of warm-blooded vertebrates characterized by feathers, toothless beaked jaws, laying hard-shelled eggs, a high metabolic rate, a four-chambered heart, and a strong yet lightweight skeleton. Birds are found worldwide and come in a variety of sizes, from the tiny humming bird to the massive ostrich.

The classification of Aves can be broken down into two major subgroups: Palaeognathae and Neognathae.

4.1.1. Palaeognathae: Also known as ratites, these are flightless birds with f lat sterna (breastbones) that lack keels, which are important for flight muscle attachment. Examples of palaeognathae include ostriches, emus, rheas, and kiwis.

Carnivora is an order of placental mammals that have specialized in primarily eating flesh, whose members are formally referred to as carnivorans. The order Carnivora is the fifth largest order of mammals, comprising at least 279 species. They come in a very large array of different body plans with a wide diversity of shapes and sizes. The common characteristics of carnivores are given below:

• They are meat eaters.

• There is the presence of canine teeth.

• The intestinal tract is short and is adapted to rapid digestion as well as the assimilation of meat.

• All species have anal glands. Some species, like the striped skunk (Mephitis mephitis), may eject the contents of the anal gland as a defensive maneuver.

• Os penis is present in males.

• There is a lack of a clavicle which helps in the freedom of movement of the forelimb.

• Ulna is well developed.

• Toes end in claws.

9.1. Classification: Order Perissodactyla

The order Perissodactyla, also known as odd-toed ungulates, is a group of herbivorous mammals characterized by having one or three toes on each foot. They are distinguished from even-toed ungulates (Artiodactyla) by this anatomical feature. Even-toed ungulates, such as pigs, cows, and deer, have an even number of toes (two or four) on each foot. Some of the well-known members of this order include horses, zebras, asses, tapirs, and rhinoceroses.

The name “Perissodactyla” comes from the Greek words “perissos,” meaning “odd,” and “daktylos,” meaning “finger or toe,” referring to their unique foot structure. Unlike even-toed ungulates (Artiodactyla), which bear weight on their third and fourth toes, perissodactyls primarily bear weight on their third toe.

7.1. Introduction

Chemical restraint of insectivores is a technique used by veterinarians and wildlife biologists to immobilize small mammals that primarily eat insects, such as shrews, moles, and hedgehogs. It is essential for performing examinations, administering medications, and conducting research on these animals.

There are several factors to consider when chemically restraining insectivores:

• Species: Different species of insectivores may have varying degrees of sensitivity to different drugs.

• Age and health: Younger and healthier animals generally tolerate chemical restraint better than older or sick animals.

• Temperature: Insectivores are sensitive to temperature regulation, so it’s crucial to maintain a stable body temperature during restraint.

10.1. Classification of Primates

The classification of primates is a complex topic that has been revised over time as our understanding of these fascinating creatures has evolved. Here’s a breakdown of the current classification system:

10.1.1. Order: Primates

Primates are an order of mammals that includes lemurs, lorises, tarsiers, monkeys, apes, and humans. They are characterized by a number of shared features, including:

• Opposable thumbs: This allows primates to grasp objects and manipulate their environment.

• Forward-facing eyes: This provides primates with depth perception, which is important for arboreal locomotion and foraging.

• Enlarged brains: Primates have relatively large brains for their body size, which is associated with their intelligence and complex social behaviors.

• Reduced sense of smell:Compared to other mammals, primates have a weaker sense of smell. This is thought to be due to their reliance on vision for foraging and social interaction.

3.1. Introduction

Various procedures performed on reptiles often necessitate chemical restraint or general anesthesia. Even routine tasks like physical examination and transportation can pose challenges, particularly with large or uncooperative reptilian patients. For safety reasons, venomous species are typically evaluated under chemical restraint. The respiratory anatomy and physiology of reptiles differ significantly from those of more familiar mammals, influencing their response to commonly used anesthetic agents. Historically, anesthetics recommended for reptiles had notable metabolic effects, but inhalant anesthesia has become more popular in recent times. Nonetheless, in species capable of anaerobic metabolism, induction with these agents may not be feasible (Girling 2013).

Rodents and lagomorphs are two distinct groups of mammals, often mistaken for each other due to some shared physical characteristics. However, they belong to different taxonomic orders and possess several key differences

5.1. Rodents

They belong to the order Rodentia and the example species include rats, mice, squirrels, hamsters, guinea pigs, beavers, and porcupines. Order Rodentia is the largest and most diversified mammalian group, differing widely in size, behavior, feeding habits, anatomy, and physiology. Based on the anatomy and functional differences of masseter muscles, it is divided into 3 suborders viz., Caviomorpha, Myomorpha, and Sciuromorpha. Caviomorpha is also called hystrichomorpha and includes guinea pigs, chinchillas and degu. The suborder Myomorpha includes mice, rats, hamsters and gerbils. These animals have the strongest ability to gnaw among animals in all 3 suborders. Sciuridae is a family that includes small or medium size rodents. This family consists of tree squirrels, ground or medium size squirrels, and large size squirrels also known as marmots or prairie dogs (Cynomys ludovicianus). Smaller and less bushy tailed squirrels are known as chipmunks (Tamias striatus) and flying squirrels (Glaucomys volans).

8.1. Classification

The ruminants belong to the Order Artiodactyla. The families in order of Artiodactyla include Camelidae, Tragulidae, Cervidae, Giraffidae, Antliocapridae, and Bovidae.

The family Camelidae includesGuanaco (Lama guanicoe), Llama (Lama glama), Alpaca or South American camelid mammal (Lama pacos), Dromedary camel (Camelus dromedarius), and Bactrian or two-humped camels (Camelus bactrianus).

The family Tragulidae includes Chevrotains originate from Africa (Hyumo schusaquaticus) and Chevrotains that originate from Asia (Tragulus species).

The family CervidaeincludesWhite tailed deer(Odococlius virginianus), Follow deer (Dama dama), Roe-deer (Capreolus capreolus), Axis deer (Axis axis), Reindeer (Rangiter tarandus), Musk deer (Moschus species) and Chinese water deer (Hydropotes species).

1.1. Introduction

Wildlife management often requires interventions to safely handle and transport animals. Chemical restraint, also known as immobilization or tranquilization, is a technique widely used to facilitate these processes (Hernandez, 2014). It involves the administration of drugs to temporarily immobilize wild animals, allowing for various procedures such as veterinary medical examinations, tagging, relocation, or rehabilitation. This chapter provides an overview of the principles, methods, drugs, and considerations involved in the chemical restraint of wild animals.

It has been often stated that the most important techniques required by the zoo veterinarian are those used in the capture and restraint of the patient. These techniques have developed into a highly technical science (Clarke et al., 2014). In the early days of zoos, the only practical method was to manually catch and hold the patient. Modern techniques, however, permit a veterinarian to shoot a CO2 powered gun, which discharges a projectile syringe at an animal resulting in complete immobilization of the animal (Jacques et al., 2009). This is accomplished without any physical contact between the patient and his captors.

The constitution of different solutions plays a significant role in successful demonstration of anatomical techniques especially the special stains. The sincerety begins at the time of fixation of the tissues and deviation at any step may lead to failure of procedure. The chemical reagents required for a particular method have been enlisted at their sites however; the commonly used chemicals are comprehended at one place for convenience of the users.

Synthesis of Zn Oxide Nanoparticle

Aim

To synthesize Zn oxide nanoparticle

Introduction

Zinc oxide nanoparticle are effective anti-bacterial and antiodur agent. They can be synthesized by number of techniques including hydrothermal methods. Their synthesis using solvothermal process is described, (Aneesh et al., 2007).

Chemical Synthesis Methods

Several methods can be used for the production of these nanoparticles, namely: (i) top-down methods (Li et al., 2006) such as vacuum sputtering (Kuhn et al., 2002) or the decomposition of iron penta carbonyl (Fe(CO)5) in organic solvents (Karlsson et al., 2005); and (ii) bottom-up methods that promote the ‘growth’ of the nanostructures via chemical synthesis, for example through the reaction of iron(II) or iron(III) salts with sodium borohydride (Wang and Zhang, 1997). However, these methods present several limitations and problems; the top-down methods are generally expensive and require specific and costly equipment while the drawbacks of the bottom-up approaches are related to safety issues due to the toxicity of sodium borohydride, the production of flammable hydrogen gas during the process (Li et al., 2006), and the tendency to form large agglomerates, very fast and at a high extent, and therefore have a reduced reactivity and degradation efficiency.

Laboratory Tests

Sampling procedures

Samples from number of containers- As soon as the cans are received at the reception dock, remove the lid, mix contents of each can with a plunger and draw equal quantities from each container and mix together. Draw approximately 80 – 100 ml of sample for testing. If the cans are of same diameter, Alternatively, milk from different containers are first poured into a vat and then the sample is drawn by thorough mixing as above..

Samples from storage tank – Before drawing sample from storage tank, switch on the mechanical agitator and allow the contents to mix for 15-20 minutes. Discard first 1.0 L of milk. Transfer 250-500 ml of the mixed milk from the outlet valve into a sample bottle.

Samples from rail / road tankers- Open the lid of the tanker and insert a big plunger through the main hole and move it forward, downward and backward bring the plunger to the surface at each stroke. Continue mixing for 15-20 minutes. Draw proportionate quantities of sample with the help of suitable dipper from different levels. Draw 250-500 ml of well-mixed sample into the sample bottle. The total volume of individual composite sample should not be less than 150 ml.

Introduction

The compounds produced one kind of microbe that are poisonous to another type of microbes are known as antibiotics. Actinomycetous bacteria and certain fungi are the primary producers of antibiotics. Antibiotics have highly complicated chemical makeups and formulations, which are frequently unknown. To combat plant diseases, however, antibiotics were first introduced in 1950. Typically, plants absorb and then move systemically internal antibiotics used for managing plant diseases. Usually, they operate on the host or the pathogen directly or after going through transformation to control plant diseases. In addition to acting as eradicators, they also serve as protectors and offer resistance to the invasion of viruses, and their impact lasts for a while.

Introduction

• Nematicides are chemically synthesized products that kill or adversely affect nematodes.

• These products can have a nematicidal or nemastatic effect on nematodes.

• Nematicidal compounds are highly toxic and kill exposed nematodes.

• Nemastatic compounds do not kill nematodes but interfere with the migration of nematodes towards the roots of the host plant or delay nematode hatching.

• Many nematicides are broad spectrum, volatile, soil fumigant.

• They are not only active against nematodes, but also insects, fungi, bacteria, weed seeds and almost everything else that lives on the ground.

Key facts

    
•    The use of chemicals has many benefits, however, there are potential risks that some of these chemicals may cause harm to organisms and human health if they enter into the environment.
    
•    Harmful chemicals are those chemicals which are persistent, bio-accumulative, as well as toxic (PBT). 
    
•    Environmental or ecological risk assessment (ERA) consists of hazard identification, effect assessment, exposure assessment, risk characterization, risk classification, risk-benefit analysis, risk reduction and monitoring.
    
•    The five types of environmental monitoring are: chemical monitoring, bio-accumulation monitoring, biological effect monitoring, health monitoring and ecosystem monitoring. 
    
•    An integrated monitoring program is a coordinated monitoring activity comprising of both chemical and biological measurements in a variety of environmental compartments. There are four different monitoring levels in an integrated ERA, these are: suborganismals (biomarkers), organisms (bioassays), populations (bio-indicators) and ecosystems (ecological indicators).

Fruit drop just before harvest is a serious problem for various crop varieties. The severity of fruit drop is influenced by several factors but plant stress and premature ethylene production is at the basis of true physiological drop. Stress factors such as late season heat, primary and secondary pest infestation, and nutrient imbalance or deficiency, and heavy summer pruning, all can contribute to drop.

The use of flower inducers stimulates flower growth during the resting year so the tree produces annually. Flower inducers can also increase the number of viable blooms during the natural fruit producing year, for an increase in production. These can also be used on varieties that provide a crop every year, to boost harvest.

Abstract

Eight species including 1 variety, 2 macro and 6 micro-lichens from Garhwal Himalaya, c 1500-2700 m, have been found to glow and emit fluorescent light, when exposed to long wave-length (254 nm) ultra-violet radiataions. Taxonomy and chemistry of all these species have been critically evaluated. The recorded taxa belong to families Physciaceae (4 species); Pertusariaceae, Rhizocarpaceae (1 species each) and Lichen imperfecti (2 species). The reported taxa are: Buellia hemispherica Singh and Awasthi, B. sub-glaziouana Singh and Awasthi; Pertusaria pertusa (Weig.) Tuck., Pyxine berteriana (Fee) Imsh. var. himalayensis Awasthi; P. cocoes (Swartz) Nyl., Rhizocarpon geographicum (L.) DC.; Lepraria taxonomic species I and II.

Understanding the chemistry of submerged soil in the field of Geology, Pedology, Agriculture and other allied sectors draws attention to the research on characteristic changes in soil under submergence. It has been reported that, about 72% of the earth’s surface is covered by submerged soils or sediments . Rice plants have unique adaptation capability to grow under submerged soil and in any type of soil (acid/alkaline) condition or land situation (upland/lowland). The knowledge on changes of important physical, chemical and biological properties under submergence have important role to play in understanding the mechanisms of availability of nutrients to the plants and sustainability of the crop during its growing period.

9.0 Submerged Soil

The soils which are saturated with water for a longer period of time in a year to make the soil a distinctive gley horizons resulting from oxidation-reduction processes are called submerged soil. About 72% of the earth’s surface is covered with soil –submergence or sediments.

Soil  is an interface of inorganic and organic componentsof the planet earth, which combines carbon and nitrogen from the atmosphere with different mineral elements of the lithosphere through millions of microorganisms, intercepting energy from the sun and moisture from the hydrosphere and atmosphere. It is a source as well as sink to adsorb, desorb, fix or release mineral elements and gases, decompose organic residues, simultaneously and support the growth of plants. All these natural processes are accompanied by runoff, percolation and evapotranspiration processes of the hydrologic cycle. Thus, soil is a dynamic body that acquires properties in accordance with the forces, which act upon it. Many soil properties emanate from physical, chemical and biologically mediated reactions, where the factors like climate, vegetation, topography and time  influences the processes. Soil reaction is one of the most important chemical characteristics of the soil solution,which has both direct and indirect effects on plant nutrition.

11.1. What is acid soil?

Acid soils refer to those soils that are characterized with the presence of higher concentration of H⁺ in soil solution and at exchangeable sites or characterized with its high proton donating capacity such as aluminium (Al³⁺) on hydrolysis gives rise to proton. Both H⁺ and Al³⁺ are responsible to contribute soil acidity. Al³⁺ causes soil acidity indirectly by generating H⁺ through its hydrolysis, while H⁺ contributes directly. Therefore, due to more abundance of H⁺, they exhibit low soil pH and low base saturation (Ca²⁺, Mg²⁺, Na⁺ and K⁺). Such soil is considered as problematic soil because plant growth is affected adversely under acidic conditions and they suffer root injuries when grown in acid soils. Besides, soil acidity interferes in the soil nutrients availability to plants, making them either deficient to plants (such as phosphorus, calcium, magnesium, molybdenum) or toxic to plants for their more availability. Under acidic condition, Al, Mn and Fe are found in more soluble form. Thus, they are taken up by the plant in such a higher level that they become toxic to plants. Phosphorus becomes immobile due to the formation of insoluble compounds with aluminium and iron under acidic conditions. Ca, Mg and Mo also become unavailable in acid soil and show their deficiency symptoms. Soil acidity also affects soil microbial growth and thus, in turn, affects the nutrient dynamics in soil. Soil acidification is induced heavily under intensive agricultural practices such as increasing leaching due to more irrigation practices, addition of fertilizers, build-up of soil organic matter and many other possible ways.

Carbohydrates are the most abundant class of organic compounds found in living organisms. Carbohydrates are also called sugars and are found in plants and animals. Plants synthesize them through photosynthesis (endothermic) by fixing carbon, hydrogen, and oxygen in the presence of solar energy and chlorophyll pigments.
nCO2 + nH2O + energy → CnH2nOn + nO2
Carbohydrates are stored as starch in plants as a source of energy. They are also stored in animals as glycogen in muscles and the liver. They are also found in skeletal structures of cell walls in plants (cellulose), bacteria (peptidoglycans), insects, and crustaceans. This stored food is consumed by animals and man, and upon their oxidation in the body, energy is released for various metabolic activities (work, growth, and various productive functions). Compositionwise, plants are more prosperous in carbohydrates (30%) than animals (1%), with water at 60% and ash at 4%. Plants are poor in proteins (5%) and lipids (1%) as compared to proteins (20%) and lipids (15%) in animals.
2.1 Introduction to Carbohydrates
Carbohydrates or saccharides (sakcharon=sugar or sweetness) are a chemical term applied to a large group of substances, which are organic compounds containing elements Carbon, Hydrogen, and Oxygen in a ratio of 1:2:1. Hydrogen and Oxygen atoms are in the ratio of two to one as in water molecules. As the ratio of hydrogen to oxygen is like H2O, they are also known as “hydrates of carbon” and are represented as (CH2O)n. But there is an exception to this general formula. Deoxyribose (C5H1OO4) and rhamnose (C6H12O5) do not have the required ratio of 2:1 for hydrogen to oxygen. On the other side, some compounds possess this required ratio but are not carbohydrates, e.g., formaldehyde (CH2O), acetic acid (C2H4O2), and lactic acid (C3H6O3). Further, some carbohydrates have nitrogen(glucosamine), phosphorus, and sulfur but do not satisfy the above general formula. The simplest sugars are called monosugars or monosaccharides. There are two main functional groups in

Cheese is made from milk, with the addition of cream, buttermilk, and/or whey. This basic raw material is also called cheese milk. Cheese consists mainly of casein (the major protein of milk), other milk proteins, fat, other milk components, and a certain percentage of water, which is bound. Proteins are precipitated by enzymes and/or acidification as well as heat and are separated by suitable processes from the aqueous phase. (whey, serum). Cheese is most often molded, pressed, and salted and has fungal and bacterial culture additions. colorants, herbs, spices, and other non-dairy ingredients are also added to the cheese. It is consumed either fresh or at different stages of ripening.

Worldwide, there are more than 2000 types of cheese, sometimes made by very different manufacturing processes. A classification can be based on several aspects and is done in different countries according to different criteria. A general classification can be made for three major groups:

a. Rennet or natural cheese: manufactured straight from milk by using proteolytic enzymes (rennet) and acid, with a more or less pronounced ripening process.

b. Fresh cheese or non-ripened Cheese: Quarg, fresh cheese, and white cheese are examples. Its manufacturing process is similar to that of rennet cheese manufacturing, but it has a high degree of acidity and is not subjected to a proteolytic ripening process.

c. Long-life cheese (processed cheese): it is more often made from rennet cheese and is textured by thermal treatment and made shelf-stable.

Concentrated milk products are obtained through partial removal of water which increases the dry matter content of milk. The increase in dry matter content in concentrated milk is proportional to the degree of concentration. The milk concentrate may be prepared from either full-cream whole milk or fat-free skim milk.

Depending on the nature of raw material and other non-milk additives concentrated milks are classified into four broad categories.

1. Sweetened condensed milk

2. Evaporated milk or unsweetened condensed milk

3. Sterile milk concentrate

4. Reconstituted concentrated milk

Sweetened Condensed Milk

One of the earliest dairy products to be produced industrially is sweetened condensed milk. According to FSSA (2006), sweetened condensed milk is the product obtained by partial removal of water from the milk of cow/buffalo with the addition of sugar or a combination of sucrose with other sugars or by any other process that leads to a product of the same composition and characteristics. The fat and/or protein content of the milk may be adjusted by the addition and/or withdrawal of milk constituents in such a way as not to alter the whey protein to casein ratio of the milk being adjusted. It shall have a pleasant taste and flavor and be free from off-flavor and rancidity. It shall be free from any substance foreign to milk. It may contain food additives. It shall conform to the microbiological requirement as laid down by FSSA. The said product shall also conform to the following requirements

1.1 Introduction
Concentrated milks, like evaporated milk and sweetened condensed milk, serve as practical substitutes for fresh milk in regions where access to it is limited or where transportation and storage are challenging. These products go through specific processing techniques to reduce their water content, thereby improving their shelf life and transportability. Evaporated milk is created by removing water through evaporation and then
sterilizing it to prevent microbial growth. This process results in a thicker consistency and a slightly caramelized flavor due to the heat treatment. On the other hand, sweetened condensed milk is made by adding a significant amount of sucrose to the milk and excluding oxygen, which inhibits microbial growth. This results in a thick, sweet product suitable for various culinary uses. These concentrated milk products are usually packaged in small cans, making them convenient for storage and transportation. However, they are sometimes diluted before consumption with water to resemble the taste and consistency of fresh milk. In regions where even concentrated milks are not easily accessible, alternatives like whole milk powder or recombined milk are used. These alternatives involve dehydrating milk into powder form or reconstituting milk components to create a liquid similar to fresh milk. Innovations in processing and packaging have led to the development of alternative uses for concentrated milks, expanding their versatility beyond traditional applications. These products continue to provide essential dairy
nutrition in areas where fresh milk is scarce or hard to obtain, offering a shelfstable solution to meet dietary needs.

Chemistry of Creaming

After being drawn from animals, normal milk will form a cream layer on standing. Because of the difference in density between fat globules (920 kg m−3 at room temperature) and milk plasma (density 1030 kg m−3), the granules tend to rise. This causes creaming, which we often want to prevent and it enables milk to be separated into cream and skim milk. Creaming is much enhanced when the globules have been aggregated into flocculates, clusters, or granules.

Cream Ripening

This unit operation serves as an intensive preparation of the cream for the churning process. It is divided into two categories.

1. Physical ripening;

2. biochemical ripening The following criteria are influenced by the cream ripening:

• Consistency, firmness, and spreadability of butter.

• Basic water content of butter during the manufacturing process (bound water in butter, which cannot be removed by any mechanical treatment).

• Buttermilk fat content, which has to be minimized.

The melting and solidification behavior of fat depends on the attached fatty acid, which indicate the hardness of the butterfat.

Natural hardness is caused mainly by seasonal feeding of the milk animals. Winter feed with a great deal of dry feed or roughage yields a hard butterfat with a high percentage of saturated and short-chain fatty acids and few double bonds in the fat molecules.

Summer feeding (green grass) results in fat with longer chains and a higher percentage of unsaturated fatty acids with many double bonds. We therefore distinguish between summer fat and winter fat or summer cream and winter cream.

The process of making dried milk involves eliminating water from milk, primarily through spray or roller drying. It is regarded as a significant sector of the dairy industry and is made from whole cow, buffalo, or standardized milk. Skim milk powder (SMP) is made from milk after the fat has been removed whereas whole milk powder (WMP) is made from whole cow or buffalo milk

FSSA (2006) Standard Of Milk Powder According to FSSA (2006), Milk powder is the product obtained by partial removal of water from the milk of cows and/or buffalo. The fat and/or protein content of the milk may be adjusted by the addition and/or withdrawal of milk constituents in such a way as not to alter the whey protein to casein ratio of the milk. It shall be of uniform color and shall have pleasant taste and flavor, free from off-flavor and rancidity. It shall also be free from vegetable oil/fat, mineral oil, thickening agents, added flavor, and sweetening agents. It may contain food additives. It shall conform to the microbiological requirements prescribed by FSSA (2006).

Water activity, high storage temperatures, longer than usual storage times, high product moisture content, high processing temperatures, and container headspace are some of the variables that affect the Maillard reaction in dried milk.

Casein and whey proteins are the major proteins present in milk. Unlike casein, whey proteins are heat-labile. Whey protein fractions present in milk are α-lactalbumin, β-lactoglobulin, bovine serum albumin, immunoglobulin, euglobulin, and lactoferrin. β-lactoglobulin and κ-casein interact during heat treatment. When milk is refrigerated for longer than 24 h, it forms γ-casein and protease-peptone fractions.

2.1 Introduction
The continuous production of dry milk has become consistently significant within the dairy industry and is expected to continue growing due to its advantageous features. These include improved shelf life, reduced storage
requirements, and lower transportation costs, all of which contribute to favourable economic outcomes.
For example, non-fat dry milk is also known as skim milk powder, dried skim milk, non-fat dry milk solids, or dehydrated skim milk. Similarly, products like dried whole milk, dried cream, and dried buttermilk are often regarded as dried or powdered whole milk, cream, and buttermilk, respectively, based on their specific compositions.
2.2 Types of Dried Powder
1. Nonfat dry milk
2. Dry whole milk
3. Dry buttermilk
4. Dry whey
5. Dry ice cream mix
6. Dry creams (sweet or sour)
7. Dry skim milk vegetable fat products
8. Malted milk Powder
9. Cheese powders (Cheddar, Blue, etc.)
10. Sweetened chocolate flavoured non fat dry milk
11. Coffee creaming products
12. Sodium or Calcium Caseinates
13. Dry high acid milks
14. Partly skim milk powder
15. Infant milk food

The terms “cultured dairy foods,” “cultured dairy products,” and “cultured milk products” are other terms for fermented dairy products. Lactobacillus, Lactococcus, Leuconostoc, and other lactic acid bacteria, along with yeasts in certain products, are used to ferment milk to make these dairy products. The product’s shelf life is extended through fermentation, which also improves the product’s taste and milk’s digestibility. There is a wide variety of fermented milk products available, each with unique flavors and attributes. The following categories apply to fermented milk products, based on the type of fermentation.

Changes in Nutrients Resulting from Fermentation

Fermentation lowers the lactose content in fermented milk products; however, if the starting milk is concentrated or fortified, the finished product’s lactose content may be higher than that of liquid milk.

The composition and content of protein and total amino acids are comparable to those of raw milk. Casein degradation is small compared to cheese, accounting for not more than 1% of the total protein. While some products of casein degradation are used by the starter microorganisms, others build up as free amino acids in the fermented kinds of milk. The amounts of free amino acids that build up differ depending on the species. Generally, proline is increased in large quantities, followed by serine, alanine, valine, leucine, and histidine. As a result of continuous starter culture activity, the level of free amino acids increases during storage. A limited degree of lipolysis occurs during the manufacture of fermented milk. The amount varies depending on the type of species, but the pattern and concentration of free fatty acids are both impacted. During fermentation and the breakdown of amino acids, trace amounts of volatile fatty acids are also produced.

Very little is known about the basic principles governing the chemistry of flavour or fragrance. In English, the term aroma chemicals is used for both fragrance and flavour compounds. Any compound with a sufficiently high vapour pressure will have an odour and this is normally of the molecular weight of around 300, a relatively low polarity granted (Frater et al., 1998). Generally only compounds with pleasant smell are considered to fall under the realm of fragrance chemistry, but purified individual components from a mixture may have a malodour. Almost all ancient civilizations had their tradition of making fragrances from natural materials, mostly of plant origin, but also of animal origin – these are mostly essential oils, exudates, balsam and resins (Arctander, 1969).
 
It was in the latter half of the 19th century that synthetic fragrance chemicals were experimented upon and brought into the market, examples being coumarin (Fig. 1) (in the year 1866), salicylaldehyde (Fig. 2) (1876), vanillin (Fig. 3) (1876), phenylacetaldehyde (Fig. 4) (1883), piperonal (Fig. 5) (1890), musk xylol (Fig. 6) (1891) and b-ionone (Fig. 8) (1893) (Frater et al., 1998).

The Structure of Proteins

Proteins are composed of building blocks called amino acids. A string of amino acids is called a polypeptide chain. Once such a chain has folded into its working three-dimensional shape, it is a protein. Though there are tens of thousands of different proteins, all of them are put together from a starting set of 20 amino acids. It is the order in which the amino acids are linked in a polypeptide chain that determines which protein will be produced.

One of the most consumed and well- known milk products in the Indian subcontinent is ghee. It is a by- product of tradition, prepared both at organized dairy plants and the household level for a well- established market. Ghee is traditionally made from the milk of cows or buffalo. The tetrapyrrole pigments biliverdin and bilirubin are responsible for the distinctive color of buffalo ghee. On the other hand, ghee is golden yellow due to the presence of carotenoids in cow’s milk. Ghee’s composition changes according to the kind and feeding habits of the animal and can differ from place to place and season to season.

In addition to, being a substantial source of fat- soluble vitamins, essential fatty acids, and other growth- promoting components, ghee is a rich source of energy. Its value as food for humans is enormous. Additional attributes related to medicine are present in ghee. Ghee can improve one’s physical and mental attributes and treat eye conditions like ulcers. Ghee is used in religious and ceremonial rites in addition to being consumed.

Composition

Ghee is a complex lipid composed of mixed glyceride which makes up 99–99.5% of its total content. In addition, it has trace amounts of calcium, magnesium, phosphorus, iron, copper, and fat- soluble vitamins, tocopherols, carbonyls, hydrocarbons, carotenoids, free fatty acids, phospholipid, sterols, and sterol esters

4.1 Introduction
Human milk widely acknowledged as the optimal source of nutrition for infants, providing a rich array of components crucial for their growth, repair and development. However, the composition of human milk can vary
significantly within and between feeds, throughout the day, over the course of lactation, and among different mothers and also populations. While this variability is beneficial for infant health and survival, it presents challenges for the management of nutrition of high-risk infants who require precise oversight. The composition of human milk can be altered by factors such as the handling of expressed milk, including how it is stored and pasteurized. Thus, proper management of expressed milk is essential. The recommended practice for infant nutrition is exclusive breastfeeding for the first six months, followed by continued breastfeeding for at least one to two years. Human milk is naturally suited to meet the nutritional needs of infants, providing both nourishment and bioactive compounds that support healthy growth and immunity.
Human milk contains a variety of bioactive components, such as immune cells, anti-infective and anti-inflammatory agents, growth factors, and prebiotics. In contrast to infant formula, which has a fixed nutritional profile, human milk is dynamic and can vary between and within feedings, influenced by maternal factors, environmental conditions, and the methods used for expressing and managing milk.
A thorough understanding of human milk’s composition is vital for effective infant feeding, especially for at-risk infants. It also allows for the assessment of how milk storage and pasteurization may impact its beneficial components. Additionally, some of the bioactive elements in human milk are being studied for their potential use in medical treatments, either as preventive or therapeutic agents.

Commercially, one of the most significant milk products is ice cream. It is a frozen product which is usually made from milk or cream that has been f lavored with fruits like peaches or strawberries, and spices like vanilla or cocoa, or with sugar or a substitute. Stabilizers are sometimes combined with food coloring. Ice cream mix typically contains 10.0% milk fat, 11.0% solids not-fat, 14.0% added sugar, and 0.3% additives like an emulsifier, stabilizer, f lavor, and color substances.

Standard of Ice Cream

According to FSSA (2006), ice cream, kulfi, chocolate ice cream or softy ice cream means the product obtained by freezing pasteurized milk prepared from milk and/or other products derived from milk with the addition of sweetening agents and fruit products, egg products, coffee, cocoa, ginger, and nuts. It may also contain chocolate, and bakery products such as cake or cookies as a separate layer and/or coating. It may be frozen hard or frozen to a soft consistency. It shall be free from artificial sweeteners. It shall have a pleasant taste and smell free from flavor and rancidity. It may contain food additives. It shall conform to the microbiological requirements as given in FSSA (2006).

3.1 Malted Milk
Malted milk, originating from the ideas of British pharmacist James Horlick in the 19th century, was initially marketed under the name “Diastoid” before being trademarked as “malted milk” in 1887. Although initially targeted
for infants and invalids, its appeal expanded due to its nutritional value, convenience, digestibility, and palatability. Recognized globally for its lightweight, non-perishable nature, and high-calorie content, malted milk is
created by evaporating a mixture of malted barley, wheat flour, and whole milk until it forms a powder.
There aremainly two types of malt powder: diastatic and non-diastatic. Diastatic malt containing enzymes breaking down starch into sugar, aiding in dough rise and crust formation, particularly in bread making. Non-diastatic
malt lacks active enzymes and is primarily utilized for flavor enhancement, commonly in beverages. It may also include sugar, coloring agents, and other additives to improve taste and appearance.
3.2 Malting
Malting is a crucial process employed in treating cereal grains, such as barley, by inducing germination through soaking in water followed by halting the process through drying or heating with hot air. This technique encompasses two main stages: sprouting and kiln-drying. The term “malt” encompasses several products of this process:
1. Malted grains: These are grains, like barley, that have undergone the malting process.
2. Malt sugars: These are sugars, predominantly maltose-rich, derived from malted grains, often utilized in baking, such as baker’s malt.
3. Malted milk products: These include beverages like malted milkshakes, made using malted milk.

The native and applied organic matter play an important role in terms of nutrient adsorption , nutrient mobility and microbial habitat on soil. The dominant ions present in soil under a particular agro-ecological situation may or may not be available to the growing plants due to the presence of organic matter. The binding energy and the stability of the organo-metal complexation would play an important role in availability of nutrients to the plants. The organo-metal complexation reaction depends on the nature of the ionic species (ionic/non ionic) present in soil. The organic fractions (Humic acid/Fulvic acid) react with metal ions present in soil to form complexes which may be stable or unstable depending upon the molecular arrangement and degree of coiling of humic/fulvic substances. The surface charge density on clay and soil pH also play an important role to determine the order of stability of different nutrients (macro/micro) in soil.

12.1. Introduction

All soils invariably contain soluble salts. However, physico-chemical and biological soil properties start degrading when excessive amount of salts are accumulated in soil, particularly in rhizosphere, due to several anthropogenic activities and environmental conditions, and crop production is severely affected. Then we refer those soils as salt-affected soil.

The need of intensive agriculture to keep pace with the increasing world population for their food requirement necessitates to bring more agricultural land area under irrigation. However, irrigation system without taking enough drainage provision and poor water quality and its poor management may make the situation worst due to the development of salt-affected soils that ensue unproductive soil and low crop yield. Crops grown on salt-affected soils suffer from high osmotic stress, nutritional disorders due to nutrient (N, Ca, K, P, Fe, Zn) deficiency, specific ion toxicities, poor soil physical conditions and as a consequence, a reduced crop productivity.

Although it is considered that the rocks and minerals on weathering lead to salt accumulation in the soil, but the salt-affected soils are not truly originated from the accumulation of such salts in situ. On the contrary, occurrence of salt-affected soils is due to receiving salts that come from other locations with water. Sea water inundation in coastal belt, irrigation with poor quality water including saline groundwater, poor drainage system, irrigation adopting unscientific ways leading to waterlogging, shallow water table etc. contribute heavily toward development of salt-affected soils. Salt-affected soils may occur under almost all climatic conditions. Their distribution, however, is relatively more extensive in the arid and semi-arid regions compared to the humid regions because of poor precipitation to leach soluble salt adequately. Since evapotranspiration greatly exceeds precipitation in these climatic conditions, the soluble salts move upward with water due to capillary action and are left behind on the surface soil and the rhizosphere, once water is evaporated. The commanding ions of accumulated salts in affected soil are sodium, potassium, magnesium, calcium, chlorides, sulphates, carbonates and bicarbonates. The nature and properties of salt-affected soils are so diverse that they require specific approaches for their reclamation and management. Therefore, it is necessary to know their origin, formation, nature, chemistry and properties in detail to classify them into groups for their proper management to maintain sustainable agriculture.

Silage fermentation is a complex process involving biochemical changes by microbial populations and the ensiling environment. The chemistry and microbiology of silage fermentation are linked, but the microorganisms are the dominant factor in the fermentation process, and they have the main influence on the quality of the end product. Many species of microorganisms are involved in the fermentation process, and their relative importance varies according to the prevailing conditions. As these conditions change during the fermentation process, the microorganism population changes accordingly. Lactic acid bacteria and clostridia are two main categories of microbes responsible for biochemical changes in silage.