eChapters

During the latter part of the 20^th century, rapid economic development in most countries coupled with population growth propelled the inevitable demand for more food and manufactured goods. However, requirement of more food is placing unprecedented demands on agriculture and natural resources. Humans have made agriculture the dominant environmental threat by clearing forests, cultivating marginal lands, and intensifying farming in sensitive landscapes and watersheds. Most of the land use systems in the tropics are characterized by a rapid decline in productivity and high rates of soil and environmental degradation which need to be addressed in a proper way.

Agriculture has changed radically since the end of World War II. Productivity of most crops has scaled to new levels because of the adoption of new technologies, machines, increased chemical inputs, and government policies. However, continuing agricultural production without harming the environment is a challenge, which must be tackled along with economic growth. Some of the environmental issues related to agriculture are top soil loss, groundwater contamination, air pollution, greenhouse gas emission, decline of family farms neglect of the working conditions of farm labourers, new threats to human health and safety by the spread of new pathogens, economic concentration in food and agricultural industries, and disintegration of rural communities (Brodt et al, 2011). This situation prompted world nations, political leaders, scientists and planners to pay more attention to the concept of sustainable development. As a concept, sustainability is concerned with the continuity of environmental economic, and social aspects of human society.

1.1 INTRODUCTION

Horticulture is defined as “The science and art of growing vegetables, fruits, flowers, ornamental plants and landscaping of gardens and surroundings in small and commercial gardens”. The word ‘horticulture’ has been derived from Latin language and consists of two parts, viz., ‘hortus’ means garden and ‘cultura’ means cultivation. Thus, the word ‘horticulture’ means garden cultivation. Horticulture basically deals with Pomology, Olericulture, and Floriculture and Landscaping. Horticulture is gaining importance as it gives more returns per unit area and also gives nutritious food to human beings thereby improves quality of life and enhances the aesthetic beauty of nature. Vegetable growing is one of the major branches of horticulture with respect to value of the products.

In technical sense all parts of vegetables are used for consumption. The term, however, is usually applied to the edible plants which store up reserve food in roots, tubers, bulbs, stems, petioles, leaves, buds, flowers, fruits, and seeds which are eaten either cooked or raw. Growing vegetables is not only important for providing the protective food but also serve as an important subsidiary food playing a more significant role in the food consumption. They are rich in nutrients and are essential components of a balanced diet.

Introduction

Importance of basic statistics in everyday life cannot be stressed enough. Inclusion of basic statistics in high school curriculum is uncommon but proves highly beneficial to supplement certain careers in future. This field may be the most widely used of all and most people don’t even know they are using it. Many of today’s brightest business minds use this study to create charts and graph that allow them to stress a certain aspect of the business they are dealing with. Market research agencies, News rooms, marketing divisions of large corporations, NGOs, accounting firms etc. are full of people who specialize in basic statistics.

Statistics is concerned with the describing, interpreting and analyzing data. It is, therefore, an essential element in any improvement process. Statistics is often categorized into descriptive and inferential statistics. It uses analytical methods which provide the math to model and predict variation. It uses graphical methods to help making numbers visible for communication purposes.

Descriptive Statistics

• Descriptive statistics summarizes or describes characteristics of a data set.

• They help to make sense of large numbers of individual responses, to communicate the essence of those responses to others

• Helps exploring and making conclusions about the data in order to make rational decisions.

• Includes calculating things such as the average of the data, its spread and the shape it produces.

• Are displayed as tables, charts, percentages, frequency, distributions and reported as measures of central tendency

• Determine if the sample is normally distributed (bell curve) as most statistical tests require the sample to have normal distribution

• Determine if the sample can be compared to the larger population

Difference between Descriptive and Inferential Statistics

Nowadays, statistics is playing a major role in the field of research; that helps in the collection, analysis and presentation of data in a measurable form. It is quite hard to identify, whether the research relies on descriptive statistics or inferential statistics, as people usually, lacks knowledge about these two branches of statistics. As the name suggests, descriptive statistics is one which describes the population. On the other end, Inferential statistics is used to make the generalisation about the population based on the samples.

Growing foliage and flowering potted plants in the home is a great way to develop an intimacy with the nature. Caring and attending the plants gives us immense pleasure and satisfaction, especially retiring after day long working schedule. Now a days, wide variety of houseplants are available that can accommodate almost any indoor location in terms of available space, light and management factors. Research carried at National Aeronautical Space Agency (NASA) has shown that having plants in the home or office, especially in a closed air-conditioned environment, can be good for your health and well-being.

Our indoor environment

It is surprising to know that our comfort zone environment may have 2-5 times the pollution levels than outside air. Although, the magnitude may vary and could potentially reach 100 times depending upon the size of building, occupants, provision of ventilation, volatile organic compounds (VOC’s) emitted from upholstery and paints. The quality of outside air also determine the indoor air quality that may get mixed-up resulting in elevating the levels of carbon-dioxide (CO₂) and other harmful gases beyond the permissible limit. It has been revealed that the indoor CO₂ levels are substantially higher (3-5 times) than those recorded outdoor. The CO₂ being a narcotic cause drowsiness and loss of concentration leading to decline in performance and productivity of employed staff. This sudden upsurge in CO₂ and other toxic gases evolved from the volatile compounds from paints likely raise the Air Quality Index (AQI) that affects the health and working efficiency of building occupants.

It has been scientifically proved that the equipments installed for ventilating closed environment of residential or commercial buildings are not efficient in removing gases and thereby, to some extent filter only the particulate matter (PM). As per the prescribed standards of World Health Organization (WHO) and American society of heating, refrigeration and air conditioning engineers, the maximum permissible limit for indoor CO₂ is 1000 ppm. The term “Sick Building Syndrome” (SBS) is a very common disorder associated now a dayswith the people working in closed environments, especially that lack ventilation. When the CO₂ levels reach 1500 ppm, symptoms such as sore throat, nasal flow and cough are quite commonly observed among the people, thus affecting their general health and well being. Poor indoor air quality has been a major factor linked to SBS, reducing productivity of employees and also cause impaired learning in children in schools.

The branch of statistics which describes the data is called descriptive statistics. After collection, the data are presented in form of tables, diagrams or graphs. This facilitates the further analysis of data. The most basic form of data analysis is descriptive analysis of data collected and presented for the study. The descriptive statistics summarises the data and helps to find the representative value of the entire data set and the variation of the other values in the data set around the representative value. The descriptive statistics includes the measures of central tendency or averages, measures of dispersion or scatteredness, measures of skewness and the measures of kurtosis. Before going to discuss the R codes for various measures of descriptive analysis, we would first discuss in brief about these measure. This will help in better understanding of the R codes.

Measures of central tendency or averages: They are the representative values of the data series. They give an idea about the concentration of the values in the central part of the distribution of the data. There are five types of averages. They are 1. Arithmetic Mean (A.M.) 2. Geometric mean (G.M.) 3. Harmonic Mean (H.M.) 4. Median 5. Mode.

Introduction

The eastern states of India comprising of Bihar, West Bengal, Odisha, Chhattisgarh, Jharkhand, Assam and eastern Uttar Pradesh occupy about 21.85% geographical area and supports 34% human and 31% livestock population of the country. Agriculture is the mainstay of economy in these states, since 83% population living in rural areas depends on it for their sustenance. The region has about 2.73 M ha of total area under reservoirs, ponds, tanks, lakes, brackish water, etc. besides 15046 km length of rivers and canals constituting about 18 percent of country’s utilizable water resources. The average rainfall in eastern region varies from 1091 to 2477 mm with a regional average of 1526 mm, which is sufficient and substantial for growing a variety of crops. However, the irrigated area in the region is 39% as against 45%, the national average.

Abattoir : An establishment where animals are butchered is known as abattoir. It is also known as slaughterhouse. 
Abiotic : Abiotic means any factor which is not biological / abiological and especially there is no involvement of the organisms in synthesis of certain compounds.

Franz Holfmeister’s (LT, 1850-1922) definition, “vitamins are substances which are indispensable for the growth and maintenance of the animal organism, which occur both in animal and plants and are present in only small amounts in food”, still holds good, although it has been interpreted in various ways.

Introduction Rapid increase in world population in last few decades has challenged the food producing sector (Agriculture, poultry, dairying and aquaculture) massively to meet the global food demand. The population is expected to be 9.9 billion by 2050 which means the food producing sector have to increase production by 60% further more than the current production (FAO, 2020). According to FAO (2016) approximately 17% animal protein and 7% total protein consumed by humans were provided by fish. Accordingly, per capita fish consumption was gradually increasing worldwide at 1.5% rate annually from 9.0 kg in 1961 to 20.5 kg in 2017 (FAO, 2018; Fajardo et al., 2022). Aquaculture which accounts for 47% of total fish production is expected to overtake capture fisheries by 2024 and reach 52% by 2029 (FAO, 2020).

INTRODUCTION

Litchi(Litchi chinensis) is an important sub-tropical evergreen fruit crop. The tree bears heart-shaped, conical, or spherical drupaceous fruits with a thin, indehiscent pericarp that surrounds the sweet, translucent, succulent, and juicy aril. Although litchi originated in the Asia-Pacific region, orchards are found in more than 80 countries. Having introduced into India by the end of the 17th century, litchi is an important fruit crop in India and is a source of livelihood to millions especially in the Gangetic plains along the foothills of the Himalayas where the crop is grown popularly. Bihar is the major litchi-producing state in India accounting for about 37% of both national acreage and production. Muzaffarpur is famous for its Shahi litchi and is popularly referred to as the ‘Litchi City’ or ‘Litchi Hub’.In India it is grown in an area of about 85000 ha with total production of 528000 MT. Bihar is followed by West Bengal, Jharkhand and Assam in terms of production, while the highest productivity of litchi (16 MT/ha) is reported from Punjab.

Maize production in India has been dominated by erstwhile Andhra Pradesh and Karnataka which together contribute around 38 per cent of the total maize production of the country. Erstwhile Andhra Pradesh has achieved the highest mean yield of 4441 kg/ha in the country during the last decade (2001-02 to 2010-11) by surpassing Karnataka which had the highest productivity in the country, earlier. The main reason for achieving the highest productivity in the country was due to adoption of improved production technology along with 100% area grown under hybrids. In Telangana, maize is the third most important crop after rice and cotton. It is cultivated in 5.74 lakh hectares, predominantly in Kharif season (4.54 lakh ha), with a productivity of 3.69 t/ha (2015-16).

Trends in maize area, production and productivity in the state (1950 to 2016)

The erstwhile Andhra Pradesh (including Telangana) is the non-traditional maize growing state. But, the climate of the state is very favorable for the crop and hence maize can be grown in any season in the state. However, it is mainly grown as a rainfed crop during monsoon season, concentrated in Telangana. The trends in area, production and productivity of maize in erstwhile Andhra Pradesh have shown a remarkable increase during the past six decades. During 1955-56, the maize acreage in the state was very less (1.89 lakh ha), which has been up by 5.3 times to the present (2014-15) level of 9.95 lakh hectares. The production has also increased dramatically from merely 1.14 lakh tonnes during 1955-56 to 42.36 lakh tones during 2014-15, which is nearly 37 times higher. Similarly, the productivity of maize in the state was merely 601 kg/ha during 1955-56, which has been increased to 4257 kg/ha during 2014-15 (Fig. 1).

Introduction to Soil Restoration and Management

One of the most crucial elements for human survival is the availability of arable land. Desertification caused by land degradation has emerged as a serious global environmental threat to human well-being and sustainable development in recent years because of both climatic shifts and an increase in human activities that have direct impacts on soil. It has been widely alarmed by the United Nations Convention to combat desertification and has shown considerable interest in this issue (UNCCD, 2015). Soil degradation is used to describe the transformation of arable land into unproductive land because of natural processes, typically accelerated by human activity (Lal, 1993).

Soil moisture stress in relation to crop and development of crop
Agronomic methods are supported with mechanical measures where land slope exceeds permissible limits and runoff gains erosive velocities. The following boxes explain the nature of agronomic measures which are essential in inter-bunded or terraced areas. These practices enhance the utility value of all kinds of mechanical structures.
1. Contour Tillage: All agricultural operations such as ridging, ploughing, harrowing, sowing, trenching, etc., are recommended to be done on the contour wherever possible or at least generally across the direction of the slope where holdings are very small. Even though the operation is very simple, it plays a major role in retarding the process of soil erosion through runoff. It also conserves soil, and due to increased time of concentration, more rainwater seeps through the soil profile to recharge ground water. Summer ploughing leaves the soil highly absorbent of initial rains.
2. Dead furrows: When all tillage operations are complete, it is advisable to leave a deep dead furrow at every 10 m interval. This should remain in position until the crop is harvested. Dead furrows aid in reducing the runoff velocity and they also conserve water.
3. Organic Matter: Indian soils are very poor in organic matter, especially in drought-prone areas: This can be improved by leaving the crop residue in situ (on the fields). Adding organic manures such as farmyard manure and compost every year as basal application to the soil improves the physical condition of the soil considerably.
Soil-Air, Soil-Temperature, and Soil-Moisture relationships are well balanced with the presence of organic matter. Organic matter improves the activities of soil microorganisms and also provides the much needed micro plant nutrients of all kinds, besides nitrogen, phosphorus and potash. Addition of large amounts of chemical fertilizers to dryland crops should be discouraged as it damages the soil due to:

Principle of field drainage and methods of drainage, Benefits of drainage
Biological drainage
Importance of bio-drainage in water logged conditions
Bio-drainage and soil salinity
Agricultural Drainage
Excess water in the crop root zone soil is injurious to plant growth. Artificial drainage is essential on poorly drained agricultural fields to provide optimum air and salt environments in the root zone. Crop yields are drastically reduced on poorly drained soils, and, in cases of prolonged waterlogging, plants eventually die due to a lack of oxygen in the root zone. Waterlogging in irrigated regions may result in excess soil salinity, i.e., the accumulation of salts in the plant root zone.
Sources of excess soil water that result in high water tables include: high precipitation in humid regions; surplus irrigation water and canal seepage in the irrigated lands; and artesian pressure. Agricultural drainage is the removal of excess water from the soil surface and/or soil profile of cropland, by either gravity or artificial means. In some soils, the natural drainage processes are sufficient for growth and production of agricultural crops, but in many other soils, artificial drainage is needed for efficient agricultural production.
Agricultural drainage improvement can help reduce the year-to-year variability in crop yield, which helps reduce the risks associated with the production of abundant, high quality, affordable food. Improved access of farm equipment to the field provides more time for field activities, can help extend the crop production season, and helps reduce crop damage at harvest.
Agricultural drainage conditions around the world can be grouped according to three agro-climatic zones: the temperate zone, the arid and semi-arid zone and the humid and sub-humid zone.
In the temperate agro-climatic zone the major role of drainage is to prevent waterlogging, i.e., excess water in the root zone of crops from surplus rainfall.

A. Answer the following.

Q.1.     How lysozyme kills Gram + and Gram – bacteria ?
Ans.     Lysozyme kills Gram + bacteria by splitting cell wall proteoglycans and Gram – bacteria in conjunction with complement.

Q.2.     Describe the different forms of leprosy ?
Ans.     Leprosy occurs in two different forms (1) tuberculoid (2) lepromatous. Tuberculoid leprosy occurs in 80% cases. Tuberculoid leprosy patients mount a strong CMI response. These patients have few organisms in their tissues and therefore few lesions. The lesions are infiltrated with macrophages and patients show a positive delayed type hypersensitivity reaction to I/D

1. Introduction

India, as a party to the Convention on Biological Diversity (CBD), has obliged to document a whole range of organism diversity within her territorial boundaries, make all attempts to conserve these bio-resources and monitor the efficacy of the conservation measures adopted. With its diverse ecological conditions and unique geographical location, Indian landmass supports rich diversity of algal flora. However, this algal wealth needs to be systematically surveyed and documented from all possible habitats. Ecological patterns emerged from recent studies within India are assessed with the identification of knowledge gaps and conservation implications in algal systematics.

During last one decade, great advances have been made in the field of Algology/Phycology throughout the world. Over the years algae has attained a greater reputation and popularity because of its economic importance, particularly as food, for commercial products, water contamination, toxin production, sewage oxidation, municipal water purification in fisheries and above all for the study of fundamental scientific information. But before the algae put in to such important use, it is imperative to have a baseline data about the material in question. Without knowing the status of algal resources of any area one cannot have projections for their utilization or gain knowledge of their ecological role and functions. The taxonomy of algae is, therefore, a prerequisite for all applied fields of algae apart from academic interest. Recent global surveys have revealed that there is lack of knowledge about fresh water algal diversity of tropical countries including India.

The raw material of foremost importance in bakery product is the wheat flour. Bakery units prefer the flour obtained by milling in roller flourmill with 70– 72 percent extraction. Flour quality may be defined as the ability of the flour to produce an attractive end product at competitive cost, under conditions imposed by the end product manufacturing unit. The concept of quality differs from producer and consumer point of view. However, in general, the term quality may refer to fitness of a raw material or a product for a particular process or consumer. For a consumer, the following parameters are important criteria of a product quality.

Abstract

Microbes are endowed with a high and exploitable potential of being useful associates with their surrounding environment and host in case of symbiotic relationship. Most of the microbes live alone but many of them require association of other living system for its survival. Hence, the beneficial role of microbes is always correlated with growth promotion and survivability of other associated living system. Now it is established that microbes play an important and key role in plant growth and development, even its survivability in case of symbiotic mycorrhizal association with orchids. They are nothing but potential tool protecting plants from different adverse conditions like diseased state, environmental stress like cold temperature, drought, metal contamination, salt and acidic or alkaline stress.

Pulses are important crops in the State of Jammu and Kashmir as they are the only source of protein, an essential part of the vegetative diet. Besides that, pulses enrich the soil fertility by fixing atmospheric nitrogen in the root nodules and improve the soil structure (Thakur et al., 2009). The tap root system explores the deeper soil strata and heavy leaf litter increases the soil organic matter. Pulses in J& K state are ideal crops for mixed and inter-cropping as well as vegetable and fodder crops. It has been estimated that by 2020 the pulse requirement for Jammu region of J&K alone will be 1.51 lakh tonnes (based on average per capita consumption of 68 grams for the projected population of 60.75 lakh) whereas the estimated requirement of J&K state as a whole works out to be 3.85 lakh tonnes (Digest of Statistics 2008-09).

Introduction

The green revolution which initiated in India during 1960’s to 1980’s was an attempt to overcome the then prevailing threats of food scarcity and lack of foreign exchange. The food scarcity was a result of severe drought which engulfed the country as well as the political situation it had to face after its short period of gaining independence (Reddy, 2010). The only way out to overcome the acute food scarcity was intensive agriculture, with the use of high yielding varieties, chemical fertilisers and pesticides which heavily boosted agriculture production in India. The remarkable increase in production and productivity resulted in non-judicious use of chemical inputs to extract the maximum from the degrading soil. This marked the era of soil, water and air pollution and extreme health hazards to all life forms.

Rachel Carson’s “Silent spring” in 1962 was an insight into the path of DDT the then prevalent pesticide through its effect on the food chain as well as the environment. She was one among the scientists to raise her voice against the indiscriminate use of pesticides. The evident impacts raised concerns over the continued use of chemical inputs (Lairon, 2010). The situation warranted the reduced or limited use of chemicals in agriculture which resulted in an “organic movement”. This caused a slow, but evident shift in the interest of growers and consumers towards organic agriculture for health security, food safety, quality and better returns (Niggli et al., 2007).

This review is an attempt to analyse the various factors affecting the safety and quality of organic food products in comparison with conventional food. Drawing a proper conclusion was a difficult task due to the limited availability of scientific papers published in this aspect, indication of only trends rather than solid proofs and non-revelation of non-significant data regarding related experiments. However, this review could evaluate the positive and negative aspects of organic cultivation and food production from the available data, so as to suggest measures for improving the quality and safety of organic food products.