eChapters

An agrometeorological observatory or station is a place where all the necessary instruments and structures are installed and maintained to observe and record the weather parameters at stipulated time interval.

Table 15.1. Instruments used for measuring weather parameters in observatories and laboratories

1. Introduction

Livestock meat and fish are rich sources of high-quality protein and other valuable nutrients such as polyunsaturated fatty acids, vitamins, and minerals and are an essential part of our healthy diet (Vladau et al., 2008; Mahmud et al., 2018; Mohanti et al., 2019; Mei et al., 2019). Food fraud and adulteration is an age-old distortive practice. The rising incidence of food contaminants and adulterants-induced health issues has challenged consumers to identify and consume safe livestock meat and fish products. Its significance has increased in recent years due to global trade, awareness among consumers, and sociopolitical issues.

Introduction

Biological nitrogen fixation (BNF), generally found in legumes, is a valuable nature’s gift through which atmospheric nitrogen is fixed by symbiotically associated rhizobia that make it available to plants. Among cereals, rice (Oryza sativa) is an important staple food crop that feeds a large proportion of the world population [1]. There is tremendous pressure on agriculturists worldwide to increase the yield to meet growing consumption to feed a world population increasing day by day. However, unlike symbiotic plant–microbe interactions commonly observed in legumes, in several cereal crop plants including Oryza sativa, endophytic associations have been observed [2-8].

The Green Revolution started in the early 1960s that led to the attainment of self-sufficiency in food grain production. This has been considered as the greatest agricultural transformation in the history of humankind. The Green Revolution contributed to widespread poverty reduction, averted hunger for millions of people, and avoided the conversion of thousands of hectares of land into agricultural cultivation.

Spices are defined as a strongly flavored or aromatic substance of vegetable origin, obtained from tropical plants, commonly used as a condiment. India is known as ‘land of spices’. Chilli (Capsicum annuum L.) also known as hot peppers and Capsicums also referred as bell peppers or sweet peppers belong to the genus Capsicum which is a member of the Solanaceae family. The native home of chilli is considered to New Mexico with secondary origin at Guatemala. They are known from pre-historic remains of Peru. Chilli was introduced into India by Portuguese in 16th century. Chilli is considered as one of the major commercial crops of the world. Both green and dried chillies are the important components of our routine diet. Chilli also contains vitamin A, C and E. It will give the required pungency, colour, taste and flavour to our dishes. The presence of capsaicin in chilli is responsible for its pungency and it has medicinal value. The extracted capsaicin is used in pain balms, cosmetics and medicines related to heart diseases. Capsanthin, a pigment in chilli is used for natural colouration to Jams, Jellies and squashes, since it is a natural pigment and no harmful or side effects on human health. Oleoresin is used in pain balms, vapours, etc. Hence, there is lot of demand for chilli oleoresin in the world market. The largest producer of chillies in the world is India contributing 52 per cent of world production, accounting for 11.67 lakh tonnes of production from an area of 7.5 lakh ha with 1550 kg/ha of productivity followed by Nigeria (17%), China (16%), Peru and Bangladesh (6%). India exported 1.8 million tonnes of chilli during 2009 (Reddy, 2010).

1. Introduction

Extrusion of foods is an emerging technology for the food industries to process and market a large number of products of varying size, shape, texture and taste. Extrusion cooking of cereals is becoming more adaptive due to its various advantages over the traditional food processing techniques (White, 1994). Nowadays the extrusion of food is of major importance in the food-processing sector and it is the only process, which covers a wide range of food products such as ready to eat (RTE) breakfast cereals, snack foods, baby foods etc. Elaborate scientific research, technological development and engineering design, which have been done in this field so far, have led to large-scale industrial production. 

Borer pests cause significant yield losses and are one of the most serious production constraints in tropical vegetable production. For instance, eggplant fruit and shoot borer (EFSB), Leucinodes orbonalis Guenée (Lepidoptera: Pyralidae) reduces yield as much as 70% (Dhandapani et al., 2003). Tomato fruit borer, Helicoverpa armigera Hubner (Lepidoptera: Noctuidae) causes about 5 to 55% loss in almost all the tomato producing areas in the world (Kashyap and Batra, 1987). Up to 80% yield losses have been reported in various vegetable and grain legumes due to legume pod borer (LPB), Maruca vitrata F. (Lepidoptera: Pyralidae) damage (Singh et al., 1990; Sharma, 1998; Gressel et al., 2004; Hammig et al., 2008; Zahid et al., 2008). Due to higher yield losses, growers tend to apply extremely high quantities of chemical pesticides to control borer pests on vegetable crops. Because the borer larvae are exposed on external plant parts only for a brief time after hatching, the window for effective pesticide application is very brief; vegetable farmers spray throughout the growing season, but without satisfactory results. A survey of pesticide use in Bangladesh indicated that farmers spray up to 180 times with chemical insecticides during a year to protect their eggplant crop against EFSB (SUSVEGAsia, 2007). Pesticide application often exceeded 50 sprays per tomato crop season in south India (Nagaraju et al., 2002). In Bangladesh, country bean (Lablab purpureus) is being sprayed at weekly or biweekly intervals—sometimes every day—to control LPB (Hoque et al., 2001). On average, farmers used 10-24 kg/ha of pesticides in cabbage and cauliflower in India to manage the diamondback moth, Plutella xylostella (Lepidoptera: Plutellidae) and other pests (Weinberger and Srinivasan, 2009).

Abstract

Seed is the most important input component for productive forestry. Large quantities of quality seed are needed every year to raise the nursery stock for propagating the desired plant species.  Commercially important species like Dalbergia sissoo, Eucalyptus tereticornis, Pinus roxburghii and Populus deltoides have become more important. Superior genetic qualities of seed have profound positive impact on growth rates and productivity of plantations and quality of the produce. To save and multiply the entire lot of valuable forest plants it is very essential to preserve and multiply those plants for which special type of nurseries are to be established. There is necessity to have special techniques and methods to meet the demand of seed and only hi-tech nurseries can satisfy this type of demand.

Abstract

In afforestation and reforestation programs, seed has become a valuable commodity and its collection, identification, handling, processing, testing, storage and certification requires prudent planning. The research and development in seed science and technology have made significant progress in recent years. The quality of seed has been the subject of increasing interest among Forest Managers and the Scientists. Not every seed is suitable for sowing. Sometimes, the seeds do not develop into normal plants or the plants produced do not produce the expected harvest. This manuscript reviews, the progress made to-date in the forest tree seed germination and highlights future line of action.

Abstract

Dactylorhiza hatagirea (D.Don) Soo, a plant species native to Indian Himalayas (Badola and Aitken, 2003; Ved et al., 2003), is one of 110 orchids known for their medicinal properties (Jain 1991; Lal et al., 2004). Known earlier as Orchis latifolia auct. non Linn., D. hatagirea has traditionally been used in indigenous system of medicine in India as ‘Hatajari’ or ‘Salam Panja’. The plant has therapeutic, ornamental and ecological significance (Gupta et al., 1998; Vij et al., 1992; Kala, 2000a). Due to over extraction from nature for medicinal use, the species has become threatened and categorized as critically endangered species (Ved and Tandon, 1998; Kala, 2000b; Ved et al., 2003; Bhattarai et al., 2014). This contribution provides insight into the botanical background, distribution, medicinal importance, threat status, cultivation and commercial aspects, and strategies for its conservation and sustainable utilization.

This chapter introduces flower forcing and crop regulation as techniques for manipulating flowering time according to market demand and seasonal requirements. It explains photoperiodism, vernalization, temperature, florigen, plant growth regulators and physiological mechanisms involved in flowering. Mechanical, chemical and environmental methods are discussed, along with crop-specific approaches for chrysanthemum, marigold, lotus, jasmine, gladiolus, rose, lilium and tulip. The chapter demonstrates how controlled flowering can improve market timing, reduce wastage and increase grower income.

Introduction

Nitrogen-fixing cyanobacteria are the group of most primitive prokaryotes that have been observed in proterozoic era. Many Proterozoic oil deposits are attributed to the activity of Cyanobacteria, such as Gloeocapsomorpha. Small concentrically layered structures called pisolites are also the result of fossilized bacteria.

Most of the aquatic organisms spend much of their lives and energies for reproduction. The young ones mature, develop sperms or eggs, spawn, and then recover to repeat the breeding cycle that continues till their death. In a majority of fish species males and females are separate individuals, fertilization is external and large number of eggs are produced (on an annual basis, its fecundity) which develop, hatch and mostly grow without parental care. The sperm and eggs are usually produced in such quantities that they represent a large expenditure of energy. The spawning process may be preceded by migrations or nest building, and followed by care of the young. Thus the success of any fish is ultimately determined by the ability of its members to reproduce successfully in a fluctuating environment and thereby to maintain viable populations.  As each fish species occurs under an unique set of ecological conditions, it has an unique reproductive strategy with varied anatomical, physiological, behavioral and bioenergetics adaptations. Unlike the finfishes, in shellfishes sexes are separate. The shellfishes use various signals to attract the opposite sex.

Abstract

Climate change is well acknowledged fact globally and in India has been witnessed with more frequent cloud bursts, highly variable frequency and distribution of rainfall, high seasonal thermal variations, receding glaciers and unstable agricultural production. Likely impact of climate change is expected to reduce agricultural productivity, production stability and incomes in some areas that already have high levels of food insecurity. However, Agriculture has the potential to retard the pace of climate change by capturing a significant part of the excess atmospheric carbon in the soil and plants in the form of organic matter and also competent to reduce emissions of nitrous oxide and methane if practiced in smart ways so developing climate-smart agriculture is thus crucial in achieving future food security and climate change goals. Transformations are needed in both commercial and subsistence agricultural systems, but with significant differences in priorities and capacity. Several climate smart agriculture practices such as cropping system improvement (e. g. crop rotation, diversification, improved varieties and integration of legumes), integrated nutrient management (e.g. green manure, compost and site specific nutrient management), resource conservation (e.g. minimum/zero tillage, keeping the land consistently covered with crop residues), precision water management (e.g. planting crops in bed, laser land leveling, mulching with crop residues) and agro-forestry have been proposed for adaptation to climate change and variability. However, their adoption decisions by the farmers are largely dependent on economic benefits associated with the interventions. It should be clearly understood that climate smart agriculture does not make use of different practices but certainly it uses them differently.

3.1 Introduction

The Mango (Mangifera indica L.) belonging to the family Anacardiaceae in order Sapindales, is amongst the most important tropical fruits of the world. In India, it is also known as the ‘king of fruits’ owing to the delicious quality of the fruit rich in vitamins and minerals. Its long period of domestication is evident from its mention in the ancient Indian scriptures. In India, mango has been valued not only for religious consideration but also for its importance in the economic and cultural life of the society. Mango is rich in Vitamin A and C, flavonoids, carotenes, glucosides, sterols, terpenes, aromatic acids, essential oils, fatty acids and phenolics. It is a powerful nutritive fruit, containing most of the essential substances needed by the human body. The most important single factor limiting the production of mango fruit at the present time is the erratic fruiting habits of this species. Some cultivars produce a good crop in most years and a poor crop in other years, while still other cultivars produce only a few fruits each year. For many years new cultivars have been selected and grown on the basis of size, appearance, and dessert quality with very little attention given to their production capabilities. The improvement of mango needs to explore new recombinants primarily by means of exploiting the breeding methodologies. Diversity or heterogeneity is the main character desired for breeding either natural or manmade. It is required to have vast genetic pool to get new combinations of desired nature and developing new hybrids. It has been mentioned earlier that the development of mango in India is the result of selection from the amateur gardeners. Now, the scientists have developed certain hybrids of mango.

Swarnjayanti Gram Swarozgar Yojana (SGSY)

The Swarnjayanti Gram Swarozgar Yojana (SGSY), a programme for the self employment of rural poor was started from 01.04.1999 after restructuring the six erstwhile Integrated Rural Development Programme (IRDP) and its allied programmes, These were : IRDP, Training of Rural Youth for Self Employment (TRYSEM), Development of Women and Children in Rural Areas (DWCRA), Supply of Toolkits in Rural Areas (SITRA) and Ganga Kalyan Yojana (GKY), and Million Wells Scheme (MWS). The basic objective of the SGSY was to bring the assisted poor families (Swarozgaris) above the Poverty Line by providing them income-generating assets through a mix of bank credit and governmental subsidy. The programme aimed at establishing a large number of micro enterprises in rural areas based on the ability of the poor and potential of each area.

3.0 INTRODUCTION

There are two main types of plant reproduction / multiplication that are used and these include sexual reproduction known as seed propagation / multiplication and the asexual reproduction known as vegetative propagation / multiplication. Propagation is most often by seeds produced by plants or by plant parts like vines, roots, tubers, suckers, etc. Propagation is the natural mechanism by which plants regenerate. Seed is the organ of reproduction in flowering plants.

3.1 SEXUAL REPRODUCTION OR SEED PROPAGATION TECHNIQUES

Seed is the organ of reproduction in flowering plants. Sexual reproduction is propagation by seeds. This is the main method by which plants reproduced in nature as most plants produce seeds except in species that have separate male and female plants; e.g. Njansang (Ricinodendron heudelotii) and Black fruit (Canarium schweinfurthii)

Seed multiplication seems to be the most practicable technique by the farmers. Example Agroforestry Species that are mostly propagated by seeds are Sweet Bush mango [Irvingia garbonensis], Bitter Bush mango [Irvingia wombolo], Bitter kola, Kola nitida, Kola acuminata, Njansang [Ricinodendron heudelotii].

The immediate and long-term objective of modern plant breeding in all countries irrespective of the state of their advancement is increasing the availability of food to meet the calorie-protein requirement of their people. In the past, breeders have concentrated their efforts on increasing the yield of the important crop species. Better adaptation to local environmental conditions, high production and better resistance to the major pests and diseases have been among the priority goals of genetic plant improvement. Yielding ability and stability undoubtedly deserve high priority but enough attention also needs to be paid to improving nutritional characteristics of the plant produce for their maximum utilisation. Awareness of nutritional requirements and the optimal characteristics of crop products to be utilised as food and feed, therefore, becomes an important parameter of breeding effort.

The main source of food in the developing world is cereals which provides 45 to 85 per cent of the total calories and 50 to 80 per cent of the total protein requirements. The consumption of animal proteins, which are nutritionally well balanced, is low and costly and beyond the reach of the low income groups. On the other hand, plant proteins are cheaper to produce and easier to store and transport. All these factors go in favour of increasing the quantity and quality of cereal proteins in order to improve the dietary and nutritional status of the masses in the developing world.

Proteins are made up of about twenty different amino acids. For man, eight of these amino acids, valine, methionine, leucine, isoleucine, threonine, phenylalanine, lysine and tryptophan, are essential (EAA) for constituting a well balanced diet. In impioving the grain quality of cereals consideration should, therefore, be given apart from the content of carbohydrates, fats, minerals and vitamins in the grains, to improving the protein content as also the amino acid composition of the protein.

We mean sustainable of agriculture as preservation of productivity of land for a long period. This requires deviation from present methods of cultivation. The deviation needs knowledge about ecological process. At present we mean agriculture in association with terms like, high-tech, bio-tech and info-tech. Our traditional farming system or conventional farming system essentially means sustainable agriculture.

SYNOPSIS

In all probability the ancient farmer’s market originated on the streets of villages and later on, on the streets of towns. The street food survived through decades and centuries and now it has assumed its new role in fulfilling the readymade food demand of the working people of mega cities. The street food has now more relevance to the growing urban population. With the lapse of time and migration people to the cities, the business and activities of street food got expanded in qualitative and quantitative terms worldwide.