eChapters

Geographic location of India is in Northern hemisphers and located between 80 4' & 370 6' N latitude and 640 7' & 970 25' E longitude. Extent of area is 329 M Ha or 329 x 104 Sq.Km or 3.29 MSq.Km. The physiography of India can be broadly grouped into triangular plateau, mountains, Indo-gangetic plains and islands. India is divided into twenty agro ecological regions and sixty five agro ecological sub regions as per NBSS and LUP. Agro ecological regions( AER) is referred to identification and demarcation of land units having comparable landform, soils, bioclimatic conditions and the length of growing period (LGP).

India is endowed with varied types of soils and this could be attributed varied relief features, landforms, climatic realms and vegetation types in the subcontinent. In ancient times, soils used to be classified in India into fertile and sterile soils. Later, the inherent characteristics and external features of soils such as texture and colour, were used to classify the soils. Based on texture, soil types were identified as sandy, clayey, loam, etc. In terms of colour, they were red, yellow, black, etc.

Scientific surveys of soils in India have been conducted by various agencies since independence. All India Soil Survey Organization, established in 1956, carried out detailed soil surveys in the catchment areas of major river valley projects like the Damodar Valley. Later, the National Bureau of Soil Survey and the Land Use Planning (NBSSLUP) ofthe Indian Council of Agricultural Research, established in 1976, made extensive studies on Indian soils and classified them as per the USDA SoilTaxonomy

Soil is generally defined as the upper layer of earth in which plants grow. It is regarded as a source of nourishment to all animals, moving or static. From agriculture or crop production point of view, soil is loose earth surface that supports vegetation, its quality, type and density. It is generally treated as a dynamic living entity and its physic-biochemical properties are responsible for its nutritional index. Precision production technology with suitable management is the key factors for its longer sustainability.

1.1. Definition

Soil: Thin layer of earth’s crust made up of disintegrated and decomposed rocks, complex mineral compound, organic matter, water/air and living organism like bacteria, fungi, insects and worms and serves as the natural medium of growth of plants.

Provides nutrients, moisture, anchorage (support) and air to plants.

Parent materials are igneous rocks, sedimentary rocks and metamorphic rocks.

Soil Science: Science dealing with soil (Natural resource) on the surface of the earth, including pedology (Soil genesis, classification and mapping), physical, chemical, biological and fertility properties and their relation to management for crop production.

Soil is defined as the thin layer of earth’s crust made up of disintegrated and decomposed rocks, complex mineral compound, organic matter, water/air and living organism like bacteria, fungi, insects and worms and serves as the natural medium of growth of plants.

• It provides nutrients, moisture, anchorage (support) and provides air to root system.
• There are different soil groups found in varied regions of India.
• Each group differs from other in physical and chemical properties.
• The variation in behaviour is mainly due to the nature of the parent material from which the soils are formed.
• Parent materials are Igneous rocks, sedimentary rocks and metamorphic rocks.
• Physical properties like structure, texture, colour, water holding capacity, depth etc. are to be noted. Chemical properties like the presence of various plant elements, pH, EC, CEC, acidic or alkaline, etc. are considered.

A family of about 90 genera and 3,000 species distributed in both tropical and temperate regions. Central and South America are the chief centres of distribution where over 40 genera are found. About 15 genera and over 90
species have been reported from India. Some of the larger genera along with their approximately world over reported species (Hickey and King, 1988) are Solanum (1700), Cestrum (150), Physalis (100), Lycium (80-90), Nicotiana (66), Capsicum (50), Petunia (40), Hyoscyamus (20) and Datura (10). Solanum tuberosum (potato) and Nicotiana tabacum (tobacco) are the two most utilized plants of Solanaceae.
Petunias, popular bedding plants, with variety of forms, sizes and shapes are employed for landscape planning, garden designs and container gardening. The numerous phenotypes viz., Grandifloras, Multifloras, Millifloras, Waves, Hedgifloras, etc. are complex hybrids. The outstanding marketable series of P. x hybrida have been developed for upright, spreading and semi-trailing to trailing habits.
Selected Indian Genera
Atropa, Capsicum, Cestrum, Datura, Nicotiana, Petunia, Physalis, Solanum, Withania.

Tomato

Genetic Resources

Tomato, a warm season crop, sensitive to frost, is usually cultivated in sub-tropical and mild cold climates. The National Bureau of Plant Genetic Resources (NBPGR), New Delhi, is the main centre for maintenance of tomato germplasms in India. The Bureau has systematically assembled more than 2,900 germplasms. Some of the promising germplasms identified for different traits on the basis of their morphological variations (Fig.1; see Plate-1) are given in Table1.

The family Solanaceae consists of 85 genera, which include both tuberiferous and non-tuberiferous ones. Brinjal (Solanum sp.), chilli (Capsicum sp.) and tomato (Lycopersicon sp.) are the major fruit vegetables under the family. In all genera, fruit is an indehiscent berry.

A key for the identification of the above three genera are furnished below:

A. Anthers connivant in a cone, longer than filaments

B. Anthers dehisce by apical pores or short slits, leaves entire, lobed or pinnatifid - Solanum

BB. Anthers dehisce introsely by longitudinal slits, the tips empty, leaves pinnatiset - Lycopersicon

AA. Anthers not connivant in a cone, not larger than the filaments, dehisce by lateral slits - Capsicum

The family Solanaceae consists of 85 genera, which include both tuberiferous and non-tuberiferous ones.  Brinjal (Solanum sp.), chilli (Capsicum sp.) and tomato (Lycopersicon sp.) are the major fruit vegetables under the family.  In all genera, fruit is an indehiscent berry.
 
A key for the identification of the above  three genera are furnished below:
    A.    Anthers connivant in a cone, longer than filaments
    B.    Anthers dehisce by apical pores or short slits, leaves entire, lobed or pinnatifid : Solanum
    BB.    Anthers dehisce introsely by longitudinal slits, the tips empty, leaves pinnatiset : Lycopersicon
    AA.    Anthers not connivant in a cone, not larger than the filaments, dehisce by lateral slits : Capsicum

Solanaceae is a plant family that comprising of 2300 species and 85 genera of which, nearly one half of the species belongs to the genus Solanum. The genus Solanum includes both tuber bearing and tuber nonbearing forms. Among the tuber nonbearing forms, the major fruit vegetables growing throughout the world are tomato, brinjal and chilli. They prefer warm humid tropical climate for growth and development. Hence, the agroclimatic regions where this type of climate prevails is suitable for seed production of these vegetables. In addition to this, hybrid vigour has been widely commercially exploited in these crops because of easiness in emasculation and pollination and availability of large number of hybrid seeds per fruit.

Tomato (Solanum esculentum L.)

Tomato is the most important warm season vegetable growing throughout the world. The fruit is valued as salad vegetable and for cooking purpose. It is one of the vegetables from which, a wide variety of processed products are made. The crop is grown throughout the year in one part or other part of the country and it has become one of the indispensable fruit vegetables in our diet. It is rich in vitamin A, vitamin C, niacin, and minerals like calcium, phosphorus etc and it is rich in antioxidant, lycopene which is the carotenoid responsible for the red colour of tomato. Tomato is of recent origin, and it is the native of Peru in South America from where it spread to the entire part of the world.

In Solanaceae family there are 85 genera, which includes both tuberiferous and non-tuberiferous plants. Among the non-tuberiferous, tomato, brinjal and chilli are the important fruit vegetables.

4.1. Tomato (Lycopersicon esculentum Mill.)

Tomato has originated in Peru and Mexican region of South America. It got its name form the azetc work “Tomatl”. In India tomato is the second largest cultivated vegetable after potato. Though it is produced in almost entire country, the major producer states are Andhra Pradesh, Karnataka, Orissa, West Bengal, Bihar, Gujarat, Madhya Pradesh and Maharashtra.

Cultivar/Varieties: A large number of varieties/hybrids of tomatoes are under cultivation. The most popular among them are Arka Rakshak, Arka Samrat, Arka Saurabh, Arka Vikash, ARTH 3, ARTH 4, Avinash 2, BSS 90, CO3, HS 101, HS 102, HS 110. Hisar Anmol, Hisar Arun, Hisar Lalima, Hisar Lalit, Krishna, KS 2, Matri, MTH 6, NA 601, Naveen, Pusa 120, Punjab Chhuhara, Pant Bahar, Pusa Divya, Pusa Early Dwarf, Pusa Hybrid 1, Pusa Hybrid 2, Pusa Hybrid 4, Pusa Ruby, Pusa Sheetal, Pusa Uphar, Rajni, Rashmi, Ratna and Rupali.

Uses

Tomato adds richness to any dish it is added. Besides using for culinary purpose tomato is also used as salad and dressings and also as adjuvant in several locally available fresh snacks. It is used for thickening of gravies in many Indian curries. As a processed product tomato sauce and ketchup are on top of favourites. It is not only delicious in taste but also rich in its medicinal value. The pulp and juice are mild aperient, a promoter of gastric secretion and blood purifier. It is also considered to be intestinal antiseptic. It is said to be useful in sour mouth, canker of mouth and chronic dyspepsia.

It is believed that efforts to combat poverty and advance sustainable development must include both the development of livestock and energy-related activities The relationship between energy and livestock in alleviating poverty is less clear and has just recently grown increasingly significant, despite the fact that each of these issues has been identified separately(Steinfeld et al., 2006).

Introduction

Cooking accounts for a major share of energy consumption in developing countries. Fifty per cent of the total energy consumed in India is for cooking (Fritz 1981). Most of the cooking energy requirement is met by non-commercial fuels such as firewood (75%), agricultural waste and cow dung cake (25%) in rural areas. The fuel wood requirement is 0.4 tons per person per year in India. In rural areas firewood crisis is far graver than that caused by a rise in oil prices. Marginal villagers have to forage 8 to 10 hours a day in search of firewood as compared to 1 to 2 hours ten years ago. One third of India’s fertilizer consumption can be met if cow dung is not burnt for cooking and instead is used as manure. The cutting of firewood causes deforestation that leads to desertification. Fortunately, India is blessed with abundant solar radiation (IMD, 1985). The arid parts of India receive maximum radiation i.e. 7600-8000 MJ m^-2 per annum, followed by semi-arid parts, 7200-7600 MJm^-2, per annum and least on hilly areas where solar radiation is still appreciable i.e. 6000 MJm^-2 per annum. Therefore, solar cookers seem to be a good substitute for cooking with firewood.

Principle of cooking

The different methods of cooking of food are boiling, frying, roasting, and baking. For boiling of rice, lentils etc. the temperature of food being cooked is about 100° C while for other methods, high temperatures are required. Heat is supplied at the bottom of the vessel for frying and boiling purposes in conventional cooking. Roasting and baking is generally performed on open fire or in ovens, wherein food is surrounded by hot surfaces and heat is transferred to the food by radiation and convection.

A solar cooker or solar oven is a device which uses the energy of sunlight to heat food or to cook it or sterilize it by means of reflective panels that concentrate the light on to a dark coloured pot in an insulated box.

Introduction

Considering the accountable post-harvest losses which is approximately 30-35 percent, food processing becomes an extremely important sector for preventing the losses and feeding the growing population. The Indian food industry is poised for huge growth, as currently valued at US$ 1.3 billion with compound annual growth rate of 20 per cent per year, increasing its contribution to world food trade every year. In India, the food sector has emerged as a high-growth and high-profit sector due to its immense potential for value addition, particularly within the food processing industry. Increasing population of the country and high cost of fuels have also created a demand for new alternate sources of energies for post-harvest processing of foods. Solar food processing technologies may become a viable option that provides good quality foods at low or no additional fuel costs. The energy policy of the developing countries now focuses on the clean renewable energy to create a further reduction of the petroleum import and to alter the utilization of petroleum energy toward the utilization of solar energy. It is an interesting fact that most of the developing countries fall in the climatic zone where the insolation is considerably higher than the world average of 3.82 kWh m-2 (Majumdar 2015). The daily horizontal insolation of India is approximately 5.80 kWh m-2 (Visavale 2009, Visavale et al. 2011). Solar dyers are an alternative to traditional drying technique and a contribution towards the solution of the problems of the open sun drying from perspective of renewable and clean energy. The International Energy Agency (IEA) declared in its 2011 solar energy perspectives executive summary (SEP 2011): “Solar energy offers a clean, climate-friendly, very abundant and inexhaustible energy resource to mankind, relatively wellspread over the globe. Its availability is greater in warm and sunny countries that will experience most of the world’s population and economic growth over the next decades.

Abstract

Recently, the reduction of post harvest food losses around the globe is a critical issue for ensuring future food security. Drying techniques is important option to prevent losses and preserve food for long time. The solar thermal energy required to remove moisture from the food during the drying process can be optimized by designing suitable solar dryers. Moreover, the application of solar energy in drying of agricultural products has tremendous potential, since it can easily provide the low temperature heating required for drying and helps in reduction of CO2 emissions. Hence, the present chapter deals with descriptions of different types of solar dryers used to dry various types of agricultural food products and design of solar dryers. Also, the heat and mass transfer parameters with respect to various process variables to estimate the performance of the food dryer system were analyzed. The advantages of solar dryers in terms of net CO2 emissions mitigation potential and the quality attributes of dried food products are also discussed. It is suggested that properly designed solar dryers having low operational cost compared to electrically heated dryers may prove to be an energy saving device for drying of agricultural products. However, the techno-economical and environmental aspects of various efficient solar dryers are needed to be further studied for applications in various irregular shaped food products.

6.1. Introduction

Solar crop drying has been demonstrated to be cost effective and an effective alternative to traditional and mechanical drying systems, especially in location with god sunshine during the harvest season. Considerable energy savings can be made with open sun drying since the source of energy is free and sustainable. However, this method of drying is extremely weather dependent and has the problems of contamination, infestation, microbial attacks, etc., thus affecting the product quality. Additionally, the drying time required for a given commodity can be quite long and results in post-harvest losses. Solar drying of agricultural products in enclosed structures by natural convection is an attractive way of reducing post harvest losses and low quality of dried products associated with traditional sun-drying methods. The crop is vulnerable to damage due to hostile weather conditions. The crop is also susceptible to re-absorption of moisture, if it is kept on the ground during periods of no sun, which reduces its quality. This type of problem can be solved by solar dryer. Many dryers have been developed and used to dry agricultural product in order to improve shelf life .Most of these either use expensive sources of energy such as electricity or combination of solar energy and some other form of energy which is not cost effective and dependent on regular supply of fuel.

Principally, drying requires temperature for removing moisture from product, air flow rate to remove moisture from drying chamber and optimum relative humidity within the drying chamber to allow fast drying. These all three requirements for drying can easily be achieved from solar energy. Solar drying is one of the direct applications of solar heat, which involves removal of moisture from the products through the application of solar energy. The removal of moisture requires only low temperature heating, which can be met easily by absorbing solar energy by the surface. This increases the temperature of the air inside the dryer. The moisture produced from the drying product is usually carried out along with the exhaust air. The characteristic of solar energy is good for the drying at low temperature i.e. high flow rates with low temperature rise. The intermittent nature of solar radiation can not affect the drying performance at low temperature. Further, solar energy is available at the site of use and saves transportation cost.

Solar energy is the energy emitted by the sun in the form of electromagnetic radiation. It is the most abundant, renewable, and sustainable energy resource available on Earth. Every hour, the Earth receives more energy from the sun than the entire human population consumes in a year. This makes solar energy a key candidate for solving the world’s growing energy needs while addressing environmental concerns. The solar energy reaching Earth can be harnessed and converted into useful forms of energy
Solar Photovoltaic Fencing
Solar photovoltaic fencing utilizes solar energy to provide an effective security solution, using high-voltage electric pulses to deter intruders or animals. The system operates by converting solar energy into electricity, which is then stored in a battery for later use. The battery powers an energizer that sends high-voltage pulses along the fence, creating an electric shock when an intruder touches the live wire.
System Components and Working
1. Solar Module: Converts sunlight into direct current (DC) electricity, which charges the battery.
2. Battery: Stores the energy generated by the solar panel. The 12V/100AH battery allows the system to operate even at night or during cloudy days.
3. Energizer: The energizer is the heart of the system, generating high-voltage pulses. It works by sending electrical pulses at regular intervals (usually one pulse per second) through the fence. The energizer is powered by the battery.

Energy is vital for the whole universe. Since the formation of the universe, energy acts a specific role. Steven Hawkins, George Ellis and Roger explained “The Theory of Relativity “Time and space had a finite beginning than corresponded to the origin of matter and energy from the time of BIG BANG.”. Before invention of fire, energy hovers everywhere but people did not have any knowledge about that. Living being requires energy for every day work which cells of the body provide them. Energy is also a basic requirement for the existence and development of human life. Energy plays an important role in the entire process of evolution, growth and survival of all living being and also in the social –economic development and human welfare of country. Energy is defined as the ability to work. Then we run or walk or do any type of work, we burn the energy in our body produced in cells by transforming food. Cars,planes,trolleys,ships, aeroplanes etc and all kind of machineries require energy to run. There are many sources to get energy as coal, natural oil, natural gas, wind, water, wave, sun and nuclear etc. The commercial sources of energy as fossil fuels (coal, oil, and natural gas) hydro-power and then nuclear power provide the need of energy now of the world. The demand of energy is growing an alarming rate. As for example, according to International Energy Agency the Global consumption of energy has increased from 4606 Mtoe (Million Ton Oil equivalent) in 1973 to 7287 Mtoe in 2003.