eChapters

The current world population of 7.6 billion is expected to reach 8.6 billion in 2030, 9.8 billion in 2050 and 11.2 billion in 2100, according to United Nations (UN). With roughly 83 million people being added to the world’s population every year, the upward trend in population size is expected to continue, even assuming that fertility levels will continue to decline (UN, 2017). This means there will be an extra billion people to feed within the next decade. Continuing population and consumption growth will mean that the global demand for food will increase for at least another 50 years .The future’s food systems need to be resource efficient and sustainable. It is quite clear that the only way to grow more food is to increase the yield while saving the environment from further degradation. It is not just food, it is the four F’s – Food, Feed, Fiber and Fuel. Digitization has increased in importance for the agricultural sector and is described through concepts like Smart Farming (SF), Precision Farming (PF) and Precision Agriculture (PA).The only way to get higher yield from limited resources is by changing agriculture into what we call Precision Agriculture, Climate Smart Agriculture, or as I prefer to call it Water-Smart Agriculture”

Epididymal Total Sperm Count

The epididymal sperm is obtained as described above, incubated at 35°C, which is the optimum temperature of rat epididymal sperm. The epididymal f luid is then diluted to a volume of 5 mL of pre-warmed (32°C) the spermatozoa are counted by hemocytometer using the Improved Neubaur (Deep 1/10mm. LABART, Germany) chamber as described by Pant and Srivastava (2003).

Total viable cell/ml = (Average number of sperm per chamber) x 103 x (Dilution Factor)

Liveability and abnormal sperm

Per cent live spermatozoa is estimated by differential staining technique using Eosin-Nigrosin stain (NE) (Campbell et al., 1953). These slides are also used for estimating the per cent abnormal sperm morphologically on the basis of observable abnormalities of head, neck, mid-piece and trail region of the spermatozoa.

The percent live spermatozoa are determined adopting the differential staining technique using Eosin-Nigrosin stain.

• A drop of epididymal semen is taken on a clean, grease free pre warmed glass slide.

• 4-5 drops of Eosin-Nigrosine stain (1% Eosin and 5% Nigrosine in 3% sodium citrate dehydrate solution) is placed near the semen drop.

• Epididymal semen and stain are mixed gently using a blunt fine glass rod.

• After 30 seconds to 1 minute a thin smear is made on a clean, grease free glass slide.

• The smear is examined under oil immersion objective.

Key Points

• Animals can experience varying levels of electric shock. Lightning typically kills animals instantaneously and causes them to fall to the ground without struggle.Most electric shock deaths are caused by cardiac or respiratory arrest.

• Animals often recover from minutes to several hours, rarely going unconscious. Residual nervous system effects, including sadness, paraplegia, and increased cutaneous sensitivity to painless stimuli, can last for days, weeks, or even months.

Introduction

Lightning strikes, broken transmission lines, malfunctioning electrical circuits, or an animal chewing on an electrical cable can all cause an animal to be injured or killed by high-voltage electrical currents. Lightning strikes are seasonal and occur in thunderstorm-prone regions. Caution should always be maintained when investigating probable electrocution situations because the source of the electrification, such as broken transmission wires, may still be present.

Major source of common homeopathic drugs are plants, animals and minerals and the drug is prepared by dilution and vigorous shaking.

Origin and Source of Homeopathic Drugs

Homeopathic medicines/drugs are prepared from following sources.

Plant Source

Homeopathic drugs are prepared from different parts of the plants and herbs viz. whole plant, whole herb, flowers, stem, leaves, bark, root and seeds. Example- Aconite, Belladonna, Arnica, Bryonia, Calendula etc.

Animal Source

Homeopathic drugs are also prepared from some parts of animals (worms, insects, flies, lizard, crabs, toads and snakes) and their secretion. Example Coccus cacti, Lachesis, Naja tripudians etc.

1. Fish flesh contains 15-20% protein.

2. Fish meal is a good source of Vitamin B.

3. Fish meal is also a good source of some trace elements which is referred as unknown growth factors.

4. Wet rendering & dry rendering are the methods of preparing fish meal.

5. Moisture level of the wet rendered fish is about 8 + (- 10)%

6. Stick water = 5.6% of fish solids + 94% of water +0.4% of oil.

7. Albumin is also present in stick water.

8. In direct driers = outlet temperature is maintained as 80 - 100 deg * C inlet temperature is maintained as high as 600 - 800 deg * C

9. Dryers typically designed to dry the wet meal to around 9-10% of moisture content.

10. Plastics are chosen for packaging for its oxygen impermeability.

11. Fish protein concentrate is a stable fish protein prepared from whole

16.1. Global Warming
The industrial revolution from mid 18th century is recognized as the primary cause of atmospheric pollution. Some of the gases like CO2, Chlorofluorocarbons, methane, nitrous oxide etc. are getting released into the atmosphere in greater volumes by combustion of fossil fuels. These gases can absorb the heat radiation leading to increase in air temperature and are called as greenhouse gases. When there is no vertical movement of air, these gases can accumulate near the ground and causes serious health hazards (Fig.16.2). Fig. 16.2: Global warming Under unstable conditions, there will be more convection and vertical movement of air that can prevent pollution near ground level. These air pollutants can be transmitted and carried away to long distance by strong winds. So, the air pollution which defies local, regional or even continental boundaries can cause atmospheric pollution and global warming. Therefore, air pollution control is not an issue for just one location or region and is now a matter of global concern.
16.2. Climate Change
As the greenhouse gases are spreading into the atmosphere, there is gradual increase in the air temperature and if no control measures are uniformly adopted

A broader definition of a tool is an entity used to interface between two or more domains that facilitates more effective action of one domain upon the other. The most basic tools are simple machines. For example, a crowbar simply functions as a lever. The further out from the pivot point, the more force is transmitted along the lever. A hammer typically interfaces between the operator’s hand and the nail the operator wishes to strike.
A telephone is a communication tool that interfaces between two people engaged in conversation at one level. And between each user and the communication network at another. It is in the domain of media and communications technology that a counterintuitive aspect of our relationships with our tools first began to gain popular recognition.
Marshall McLuhan famously said “We shape our tools. And then our tools shape us.” McLuhan was referring to the fact that our social practices co-evolve with our use of new tools and the refinements we make to existing tools.

I. FILL UPS

1. The type of harvest in paddy is _____.
2. The type of harvest in cumbu is _____.
3. The type of harvest in bhendi is _____.
4. The type of harvest in brinjal is _____.

Composites defined as advanced generation populations maintained by random mating in the material constituted through mixing of equal quantity of seeds of crosses showing less inbreeding depression in F2 over F1. The components of composites inbreds, open-pollinated populations, locally available open-pollinated cultivars, hybrids, advanced generation lines, improved populations. Mixing the seeds of several phenotypically outstanding lines produces a composite variety and encouraging open pollination to produce crosses in all combinations among, the mixed lines. The lines used to produce a composite variety are rarely or not tested for combining ability with each other like as done in case of synthetics where the combining ability of the component lines is invariably tested for GCA. Composite are commercial varieties and are maintained by open - pollination in isolation. While mixing the seeds of various genotypes, care should be taken that the component lines are similar in maturity height, seed size, colour, etc. so that the composite maintained through random mating in isolation manifests a reasonable degree of phenotypic uniformity. The variety is maintained by open pollination. Farmers can use their own seed for 3 to 4 years.

Nutritional and food security is the problem of the day globally due to increase in population by many folds. It is therefore one of the important challenges of public and private sector to provide nutrient rich food with appropriate security for development of human kingdom. Advances in food production have largely kept pace with demand. More than 830 billion people are still hungry and more than 2 billion people are lack of sufficient nutrients. Paradoxically, more than 2 billion people are overweight or obese. Malnutrition means bad nutrition not only under nutrition. For some time the food debate centered on the food security drawing on wildly accepted thinking from 1966 i.e. world food summit which defined food security as a state or condition “when all people at all times are physical, economic and social access to sufficient, safe and nutritious food to meet the dietary needs and food preference for active and healthy life”. Thus nutrients are necessary component to food security.

Key Points

• Physical cooling is more effective in managing hyperthermia.

• Heat stroke occurs when the cause is solely physical.

Introduction

Hyperthermia is an unusually high body temperature (also known as overheating) caused by the body absorbing or producing more heat than it can discharge. Simply said, it is the increase in temperature above the critical point. Heat stroke is most common in animals when they lose control of their body temperature.

Urban climatology deals with changes in climatic conditions that prevail in large cities and towns that differ from the surroundings. Urban climates are influenced by large built-up areas, increased human activities and dense population and are found to experience differences in temperature, humidity, wind speed and direction and rainfall compared to adjoining areas. Tall buildings, paved streets and parking lots affect radiation balance, wind flow and run-off. The atmosphere in urban areas will have higher concentration of pollutants like carbon monoxide, oxides of sulphur and nitrogen, hydrocarbons, oxidants and particulate matters. Heavy concentration of air pollutants will have considerable impact on temperature, humidity, wind, and precipitation in and around urban areas. Heavy concentrations of air pollutants for longer periods or several days may lead to temperature inversions. The temperature inversions prevent convection and vertical movement of air. The centre of urban area will be warmer by even 5 to 6°C compared to adjoining areas. During summer months, the concrete structures absorb, store and reradiate more solar energy per unit area compared to vegetation. During nights, radiative losses from urban buildings and roads keep city warmer than the rural areas. The average relative humidity in cities is usually lower due to lack of evapotranspiration from vegetation. The mean wind speed will be 20 to 30 percent due to increased frictional drag induced by built up urban terrain (Fig.17.1).
The urban areas influence precipitation patterns in its vicinity as turbulence and convection get modified by city environment.
17.1. Urban Heat Islands
An urban heat island is a type of microclimate that is created when an urban area becomes warmer than the surrounding area. It is common in large cities (Fig.17.2). The characteristic features of urban heat islands are as follows:
• Increased temperature
• Large temperature difference by even 5 to 6°C
• The south facing buildings receive more sunlight in the northern hemisphere
• The tall buildings in urban areas create streets that act like deep valley
• The albedo will be very less. The darker areas lead to more absorption of incoming solar radiation and emit more of long wave radiation
• The concrete structures are built with materials having low specific heat. Therefore, concrete structures warm up faster and lead to quick rise in temperature
• The higher density of buildings reduces wind speeds.

This chapter explains how B-cell receptors, T-cell receptors and major histocompatibility complex molecules participate in antigen recognition. It differentiates MHC class I and class II pathways and describes the processing of endogenous and exogenous antigens. The roles of dendritic cells, macrophages and B lymphocytes as professional antigen-presenting cells are examined. Topics include MHC restriction, antigenic peptides, proteasomal degradation, ubiquitination and recognition by CD4-positive and CD8-positive T lymphocytes. The chapter also discusses superantigens, opsonization, phagocytosis, T-independent antigens and species-specific MHC systems such as BoLA and the avian B complex. These concepts explain the initiation of adaptive immune responses.

Communication material is the joint product of knowledge, skill and attitude base of the communicator. Further, most of the communication done on behalf of certain organization also reflects the objective, work culture, strategy and contribution of the organization. Hence analysis of communication material is of greater relevance in exploring the trends, vision, behavior and future course of action. In this chapter, we are going to discuss the content analysis; it’s meaning and practical application.

I. FILL UPS

1. The seed removal in wet fruits is known as _____.
2. The seed removal in dry fruits is known as _____.
3. _____ is used for mechanical extraction.

1. SEED PURITY AND ITS COMPONENTS

Seed purity analysis from the working sample taken from submitted sample is made in accordance to ISTA rules. The uncertified seed sample is generally a mixture of pure seeds, inert matter and biological impurities including genetically impure seeds of the variety.

A buyer expects to have good seed and not a mixture of pure seed with a high percentage of chaff, straw, sand, weed seeds and other crop seeds and also genetically impure or mixed seeds.

Purity analysis is a test to estimate the extent of biotic and abiotic impurities present in the seed lot of a variety.

3.1. GM or transgenic crop

Plant that has a novel combination of genetic material obtained through the use of modern biotechnology.

GM crop contains a gene(s) that has been artificially inserted instead of plant acquiring through pollination.

In 1994, Calgene’s delayed ripening tomato (Flavr-Savr) is first GM food crop.

What is Case Analysis?

Case analysis is basically a real life problem-based learning method. It requires the readers to become active participant in the process and apply their analytical skills including critical skills, reflections, ability to inter-relate multiple aspects of the situations and issues, apply divergent and convergent perspectives in order to identify most feasible solution under constraints and limitations.

How to go about Analysing Case?

Every case and anecdotes have certain core and peripheral issues. Identifying critical incidence is very important to clearly understand the context and problem. Therefore, the participants need to be very active and involved when reading and analysing the cases and anecdotes. The goal is to follow a structured and logically organized format for analyzing every aspect of the case.