eChapters

Abstract

The available data revealed that the area under temperate fruits in Uttaranchal was about 1.4 lakh ha, which was more than 60 per cent of total area under fruit crops, whereas the production per annum was to the tune of 44.50 per cent  of the total fruit production in the state. The productivity status of apple (1.38 t/ha) was very low as compared to national average productivity of 4.98 t/ha. Unfortunately, the prevailing constraints such as non-availability of elite planting material; lack of technical know how; dry land horticulture; high cost of production, lack of credit awareness and availability; small and fragmented land holding; old and senile orchard; lack of transport and communication facilities; poor mechanization; lack of efficient marketing system and post harvest infrastructure do not allow the farmers to take advantage of the emerging opportunities in temperate fruit production.

Abstract

The arid Kachchh district, located at the western most part of the Gujarat State in India, is known for its large extent of area under wetland habitat, which is represented by numerous seasonal water bodies and coastal habitats. Vast stretch of grasslands also available in the northern border of the district, the Banni (23⁰ 19’ to 23⁰ 52’ N; 68⁰ 56’ to 70⁰ 32’ E), which encompasses an area of 2,617 km². There are many depressions in Banni, locally known as Dhandh (shallow lakes). During monsoon, rainwater gets collected in these depressions and form shallow lakes. About 34 smaller and bigger size Dhandhs are present in the Banni. Banni communities are highly dependent on the Dhandhs for various purposes. Due to the erratic rainfall in arid Kachchh, Maldharis is highly unstable for livestock in search of fodder and water during drought years. During the normal rainfall years, livestock from neighboring talukas of Kachhh and even from other districts depends on this grassland and Dhandhs. During last decade, the Banni grasslands have seen serious environmental changes due to the invasion of an exotic plant Prosopis juliflora and increasing the salinity are the major issues of Dhandh degradation. Thus, the Banni is gradually losing its capacity to sustain human and livestock population.

Main objectives of the present paper is to examine the local perceptions of wetland and grassland change, socio-economic status, and factors that cause degradation of the wetland and vegetation resources in the Banni grassland.

ABSTRACT

Malabar Spiny Dormouse (Platacanthomys lasiurus), the endemic rodent found in the Western Ghats of South India was studied in the Peppara Wildlife Sanctuary, Thiruvananthapuram District, Kerala, to determine the status, distribution, food and feeding of the species.

Crabs are one of the fast-growing animals from phylum arthropod. Freshwater crabs is now becoming as an important shellfish in freshwater aquaculture production due to its delicacy and nutritional richness. Freshwater crabs are considered good for human consumption and economically important crustacean in many developing countries such as India, China, Nigeria, Japan etc. Freshwater crabs are distributed in the tropical region of the world and they spend their entire lives in freshwater. In Indian territory Western ghats of Maharashtra and north east part of India are considerably more diverse in freshwater crab biodiversity. While only freshwater crab species Barytelphusa cunicularis is commonly observed all over India. In Maharashtra Kolhapur and Konkan region stands out for well-established crab market, driven by high freshwater crab consumption. Freshwater crab serve as good protein food, lipid and cheap carbohydrate source as well as valuable mineral source for human consumption particularly tribal and poor people. Freshwater crab aquaculture, like other types of aquaculture practices, offers a wide range of culture systems, extensive monoculture to intensive monoculture. In freshwater crab aquaculture crab farmers mainly prefers Barytelphusa cunicularis as a culture species.

Introduction
 
The major challenges in 21^st century are food security, environmental quality and soil health. Besides, shrinking land holdings and increasing cost of inputs in India merit adoption of scientific use of plant nutrient for higher crop productivity. The soil fertility and fertilizer use project initiated in 1953 following a study by Stewart in 1947 which was the first systematic attempt in India to relate the knowledge of the soils to the judicious use of chemical fertilizers. The soil testing programme was started in India during the year 1955-56 with the setting up of 16 soil testing laboratories under the Indo-US Operational Agreement for “Determination of Soil Fertility and Fertilizer Use”. In 1965, five of the existing laboratories were strengthened and nine new laboratories were established to serve the Intensive Agricultural District Programme (IADP) in selected districts.

Steam is utilized in steam power plants, steam engines, atomic power plant, and food industry for pasteurization, sterilization, textile industry, paper industry and in railway to generate power. Steam is also utilized in process type industries like sugar industries, textile industries, chemical industries for sizing and bleaching. Steam is also employed to store energy and transported through pipes.

“Steam generator or boiler is, usually, a closed vessel made of steel. Its function is to transfer the heat produced by the combustion of fuel (solid, liquid or gaseous) to water, and ultimately to generate steam” [4] . The American Society of Mechanical Engineers (ASME) [5] gives the following definition of the steam generating unit:

INTRODUCTION
The hydraulic power steering system operates by using pressurized power steering fluid to reduce steering effort. The system is powered by a pump, driven by an engine accessory drive or serpentine belt. The pump sends high-pressure fluid through a hose to the input side of the power steering gear-control valve. The high pressure applied to the control valve assists the driver in turning the front wheels. The power steering fluid is stored in a reservoir, and the fluid returns from the steering gear at a much lower pressure to maintain the proper level in the reservoir.
In a hydraulic power steering system, the fluid is continuously pumped, and the system is influenced by engine speed. High RPM results in high-pressure output, while lower RPM causes low-pressure output. To ensure constant pressure, the power steering pump uses a bypass valve, which regulates the pressure regardless of the engine speed. This helps maintain consistent performance.
ELECTRO-HYDRAULIC POWER STEERING
These systems employ a brushless electric motor to drive the hydraulic power steering pump instead of an engine driven accessory drive or serpentine belt. This system operates the same and provides the same feel of a conventional hydraulic power steering system.
Electric Power Steering or Motor-Driven Power Steering
This system eliminates hydraulics and pressurized fluid from the system. When the driver turns the steering wheel, a brushless bi-directional permanent magnet motor connected to the steering gear or steering column turns the front wheels. Sensors detect which way the steering wheel is turned to assist the movement of the steering gear in the correct direction. No matter what kind of

8.6.1. Function

It steers the tractor in the required direction. The rotation of the steering wheel moves the steering column, which in turn rotates the sector shaft. This rotation pulls the pit man arms on one side and pushes at the other side. This motion is conveyed to the wheels by the drag link and makes the front wheel turn in the requisite direction.

INTRODUCTION
The system responsible for controlling the angular movement of the front wheels of a tractor is called the steering system. This system reduces the effort required by the operator to turn the front wheels through the application of leverages. The key components of the steering system include the steering wheel, steering shaft, steering gear, drag link, steering arm, tie rod, and king pin.
When the operator turns the steering wheel, the motion is transferred via the steering shaft to produce angular movement in the pitman arm, through a set of gears. The pitman arm then transmits this angular motion to the steering arm via the drag link and tie rods. The steering arm, which is attached to the king pin (integrated into the stub axle where the wheels are mounted), influences the movement of the front wheels.
The primary function of the steering system is to control the vehicle’s direction. This is achieved by converting the rotation of the steering wheel into a change in the angle of the steering wheels’ axes through a series of links. The steering system also ensures directional stability, ensuring that the vehicle automatically returns to a straight path when the steering force is released. Additionally, the system is designed to minimize tire wear.
Steering systems can be classified based on their wheel operation: front wheel steering, rear wheel steering, or all-wheel steering.
When the operator turns the steering wheel, the motion is transmitted through the steering shaft to tire angular motion of the pitman arm, through a set of gears. The angular movement of the pitman arm is further transmitted to the steering arm through the drag link and tie rods. Steering arms are keyed to the respective king pins which are integral part of the stub axle on which wheels are mounted. The movement of the steering arm affects the angular movement of the front wheel. In another design, instead of one pitman arm

Stem cell research is one of the most important and promising areas of research in biological science in recent times. The stem cell technology has revolutionized modern biology. It is playing a major role for improving human as well as animal health by controlling number of incurable degenerative diseases and restoration of damage to organs via transplantation therapy. Stem cells are a specific group of cells that remain in an undifferentiated state and can be found in embryos, fetuses and adult individuals. Stem cells are primitive, undifferentiated cells present in almost every tissue that have the ability to differentiate into different types of tissue like bone, tendon, ligament, cartilage etc. Bone marrow stem cell is the ideal stem cell that is unspecialized and can undergo lineage specific differentiation into bone or blood cells under different signals or environment with new special function. Several verities of stem cells have been isolated and identified in vivo and in vitro. The two broad types of mammalian stem cells are embryonic stem cells that are found in blastocyst, and adult stem cells that are found in adult tissue, bone marrow.

Introduction
Stem cells are the undifferentiated cells of the body which have inherent capacity to differentiate and proliferate into any cell type under programmed command. These cells perpetuate themselves through self-renewal by programmed pathways to give rise to new adult cells (Remya et al., 2014). According to plasticity, the stem cells are categorised into totipotent, pluripotent, multipotent and unipotent. Broadly they can also be classified as embryonic stem cells and adult somatic stem cells. Totipotent stem cells are those which can give rise to all types of cells along with placental membranes whereas pluripotent stem cells give rise to all cell types except placental membranes. The multipotent set of stem cells can give rise to more than one cell type and unipotent ones can differentiate into only one type of cells. Mesenchymal stem cells (MSCs), which fall under the multipotent stem cells category, have the multilineage potential to differentiate into many mesenchymal lineages like osteocytes, chondrocytes, adipocytes etc. (Kim et. al., 2013). They can be easily isolated from the adipose tissues, bone marrows, muscles, liver, umbilical cords, lungs etc. and can be easily proliferated in vitro. MSCs were first identified from the bone marrow in a pioneering study by Fredenstein et al (1976) who isolated the bone forming progenitor cells from rat bone marrow. Although the MSCs represent very small fraction of 0.001-0.01% of total nucleated marrow cells, they can be isolated and differentiated into multiple lineages under defined culture conditions. They are generally isolated from iliac crest, tibial and femoral marrow compartments along with thoracic and lumbar spine in large animals. Stem cells have been used for cellular therapy and tissue engineering for quite a period of time owing to their regeneration potential. They are unspecialized cells with the ability to renew themselves for long periods without significant changes in their general properties. These cells under the influence of appropriate signals can differentiate into specialized cells with a phenotype distinct from that of the precursor (Kim et al., 2013). It may be that stem

Abstract

Onion (Allium cepa L.) and garlic (Allium sativum L.) are important members of the family Amaryllidaceae. Bulbs, which are the edible component in both onion and garlic grow underground and are of nutritional and medicinal importance. These underground bulb vegetables are affected by many diseases caused by different microorganisms like fungi, bacteria, nematode and viruses causing huge economic loss. Stemphylium leaf blight caused by Stemphylium vesicarium, is the major fungal disease affecting their productivity of the edible bulbs adversely.The fungus primarily attacks the leaves but can affect bulbs in storage. Initial infection is characterised by appearance of small greyish white oval spots on the leaves. These spots are often surrounded by a yellowish halo with irregular margins. Fungal pseudothecia may over-winter in contaminated plant material or may survive in the soil having plant debris and ascospores are the primary inoculums in the following season. Spores require rain or persistent dew to cause infection. This disease can spread rapidly when environmental conditions are favourable for spore development. Suitable integration of more efficient treatments like fungicides, bio agents in combination with appropriate cultural control provide better management of the Stemphylium blight disease

Advertising is a crucial tool for businesses to promote products and services to their target audience. A well-crafted advertisement not only grabs attention but also persuades potential customers to take action. Writing an effective advertisement requires a strategic approach that combines creativity, clarity, and persuasion. This chapter outlines the key steps involved in crafting a compelling advertisement

Step 1: Define the Objectiv

Before writing an advertisement, it is essential to determine its primary goal. The objective could be to increase brand awareness, generate leads, promote a new product, or drive sales. A well-defined objective ensures that the message is clear and focused

Step 2: Identify the Target Audience

Understanding the target audience is critical in crafting a message that resonates with potential customers. Consider factors such as demographics, interests, preferences, and pain points. Knowing the audience helps in selecting the right tone, language, and messaging that appeal to them.

Step 3: Craft a Compelling Headline

understanding, artistic expression, and engineering principles. Whether intended a a modest home feature or a grand commercial centerpiece, the setup of an aquarium requires detailed planning, suitable material selection, and adherence to sequential procedures. A well-executed aquarium setup not only enhances interior aesthetics but also ensures a safe and thriving environment for aquatic
organisms.
Setting up an aquarium involves much more than simply placing water and fish in a tank. It encompasses a range of critical stages, including selecting an appropriate site, installing the tank, layering substrates, arranging filtration systems, conditioning the water, aquascaping, and gradually introducing fish or plants. Each of these steps is vital in creating a self-sustaining aquatic ecosystem where fish, flora, and helpful microorganisms interact in balance.
Many beginners may underestimate the importance of tank cycling, species compatibility, or water parameter regulation—each essential for long-term aquarium health. Similarly, elements such as lighting, aeration, decorative items, and filter systems must be selected based on the intended aquarium type—be it freshwater, marine, planted, or specialized.
This section offers a step-by-step guide to the aquarium construction and setup process, emphasizing key practices for achieving both functional stability and visual appeal. Whether for leisure, education, or commercial use, proper setup is fundamental to the success and sustainability of any aquarium.

Identify main reasons and purpose of curriculum development and key areas needed by stakeholders for curriculum change. This can be done by adopting participatory methods like Focus group discussion/ field level workshops. Carry out stakeholder analysis and identify specific potential areas suggested by stakeholders to be included in the curriculum for better performance at the f ield level and their likely role in the process. In order to encourage greater stakeholder involvement invite stakeholders such as staff and students from various farm universities, field extension workers and farmers.

Good governance is crucial for the effective functioning and development of any country, including India. To ensure good governance, several steps have been undertaken in India. Here is an introduction to some of these steps;

1. Strengthening the Democratic Decentralization

The 73^rd and 74^th Amendments to the Constitution of India are pivotal in strengthening democratic decentralization in the country. These amendments, passed in 1992, provide constitutional recognition and support for local self-governance in rural and urban areas, respectively. The 73^rd and 74^th Amendments establish Panchayats (rural local bodies) and Municipalities (urban local bodies) as institutions of self-government. They empower these local bodies with the authority to plan and implement economic development programs, social justice initiatives, and the provision of essential services within their jurisdictions.

The transition from conventional to organic farming requires numerous changes. One of the biggest changes is in the mindset of the farmer. Conventional approaches often involve the use of quick-fix remedies that, unfortunately, rarely address the cause of the problem. Transitioning farmers generally spend too much time worrying about replacing synthetic input with allowable organic product instead of considering management practices based on preventative strategies. Here are a few steps new entrants should follow when making the transition to organic farming:

20.1. Understand the Basics of Organic Agriculture and the Organic Farming Standards

Since organic production systems are knowledge based, new entrants and transitional producers must become familiar with sound and sustainable agricultural practices. Transitional producers should be prepared to read appropriate information, conduct their own trials and participate in formal and informal training events. As mentioned, switching from conventional to organic farming is more than substituting synthetic materials to organic allowed materials. Organic farming is a holistic system that relies on sound practices focused on preventative strategies. Since there are often few organic remedies available to organic producers for certain problems, prevention is the key element in organic production.

Advertising is a crucial component of any marketing strategy. It helps businesses communicate their value proposition to their target audience, build brand awareness, and drive sales. However, effective advertising requires a well-thought-out strategy. In this chapter, we will explore the essential steps to creating an effective advertising strategy for marketing success. Step 1: Define Your Objectives Before launching any advertising campaign, it is essential to establish clear objectives. These objectives should be specific, measurable, achievable, relevant, and time-bound (SMART). Common advertising objectives include: • Increasing brand awareness • Generating leads • Driving sales or conversions • Enhancing customer engagement

A successful and sustainable farmer producer organization (FPO) is an entity that is owned and managed by farmers, and is focused on improving their livelihoods through sustainable and profitable agricultural practices. Such an organization operates with a long-term vision, and is able to adapt to changing circumstances in the agricultural sector. Viability, stability and sustainability are the three degrees of permanency in business. Analysis of these three is very important for any business and entrepreneurs.

5.1. Viability

viability of a business indicates that it is (or has the chance to be) successful. A viable firm is profitable, which indicates that it generates more income than it spends on operating expenses. It is tough to resurrect a failing firm. The company would need to either boost income or lower expenditures.