eChapters

1. Village market is based on the classification of ________________

a) Volume of transaction

b) Location

c) Time span

d) Area coverage

2. Regional Markets are based on ___________

a) Location

b) Time span

c) Area coverage

d) Volume of transaction

3. The prices of commodities are controlled mainly by the extent of demand for the commodity rather than the supply of the commodity.

Classification of market

There are several bases on which markets are classified.

a. On the basis of location

On the basis of the place of location or operation, markets are of the following types:

Village market

A market which is located in a small village, where major transactions take place among the buyers and sellers of a village, is called a village market.

Primary markets

• These markets are located in big towns near the centres of production of commodities. In these markets, a major part of the produce is brought for sale by the producer-farmers themselves. Transactions in these markets usually take place between the producers/farmers and traders.

Under the selected breeding system selected males and females are mated. The breeding system can be classified into five different ways depending on their phenotypic and genotypic relations.
The five Breeding Systems are
(1) Random mating,
(2) Phenotypic assortive mating,
(3) Phenotypic disassortive mating,
(4) Genetic assortive mating and
(5) Genetic disassortive mating.
1. Random mating or Panmixia: It is a system of mating in which each male individual has an equal opportunity to mate with the female individual and vice versa. This mating system generally takes place in nature where the number of males and females are assumed to be equal.
2. Phenotypic assortive mating: In this type of mating animals which are phenotypically alike are allowed to mate among themselves. This is also called “like to like” mating.
3. Phenotypic disassortive mating: Here individuals which are phenotypically unlike are allowed to mate. It is also called “unlike to unlike” mating. For example, mating of tall with short individuals.
4. Genetic assortive mating: In this system individuals, which are closely related genetically are allowed to mate. This is also known as inbreeding.
5. Genetic disassortive mating: This system is just opposite to the previous system where mating takes place between less closely related individuals. This is also called as out breeding.

Improvements in microscopes enabled scientists to study the ‘invisible’ organisms – that is, those too small to be seen with the naked eye. They were able to show that certain of these microscopic creatures are responsible for the infectious diseases of higher organisms. Most of them are harmless, some are essential for life and some are used in the manufacture of products that are of benefit to humans.

A mutagen is a physical or chemical agent that changes the genetic material (DNA) of an organism and thus increases the frequency of mutations above the natural incidence. Errors during DNA replication, repair and recombination also causes spontaneous mutations naturally. Mutagens may be of chemical, physical or biological origin. The properties of each mutagen vary by causing damage to the DNA, and most often result in replication error.

1.1. Above ground feeders

1.1.1. Feeding on flower buds, leaves and bulbs.

Seed gall nematode: Anguina tritici

Leaf and bud neamtode: Aphelenchoides

Stem and bulb nematode: Ditylenchus

5.1 Fundamentals of Plant Nomenclature
(A) Plant Nomenclature
5.1.1 Definitions
Assignment of definite names to plants is called nomenclature. In the present botanical world, the nomenclature involves the principles governed by rules formulated and adopted by International Botanical Congresses. The rules developed by IBC are listed formally in a code called International Code of Botanical Nomenclature (Voss et al., 1983), abbreviated as ICBN. The major goal of ICBN is to provide one correct name for each taxon. Taxa (singular, taxon) are the taxonomic groups of any rank. The ascending hierarachy of taxa include species, genus, family, order, class and division.
5.1.2 Who is a Nomenclaturist?
A nomenclaturist is a taxonomist who assigns names to new taxa, determines the right names for old taxa according to the rules of International Code of Botanical Nomenclature, and finalizes the right name for a specimen according to an established system of classification.

There are thousands of diseases, which attack crop plants. Classification can be made based on several criteria. The various ways of classifying diseases of plants are given below.

A. Based on Type of Infection

1. Localized disease- affecting only a part of the plant; leaf spots and anthracnoses caused by different fungi.

2. Systemic disease- affecting the entire plant.

B. Based on Symptoms

Rusts, smuts, wilts, blights, cankers, mildews, rots, damping-off, die-back, scab etc.

There are number of diseases which attacks crop plants. Therefore It is mandatory to classify plant disease into more manageable and more specific group based on several criteria for easy and better understanding. Let us discuss one by one.

1. On the basis of type of infection

On the basis of type of infection disease can be classified into two types

There are thousands of diseases, which attack crop plants. Classification can be made based on several criteria. The various ways of classifying diseases of plants are given below.
A. Based on type of infection
1. Localized disease: Affecting only a part of the plant; leaf spots and anthracnoses caused by different fungi.
2. Systemic disease: affecting the entire plant.
B. Based on symptoms: Rusts smuts, wilts, blights, cankers, mildews, rots, damping-off, die-back, scab etc.
C. Based on the host plant
1. On the basis of host e.g. Diseases of apple, diseases of wheat, diseases of rose, diseases of coconut, diseases of coffee, diseases of cotton.
2. On the basis of host group- e.g. cereal crop disease, pulse crop diseases, oilseed crop diseases, root crop disease, forage crop disease, plantation crop disease etc.

Introduction
Plant diseases pose significant challenges in agriculture, affecting crop yields, quality, and overall plant health. To manage these diseases effectively, it is essential to classify them systematically. Accurate classification helps researchers and farmers understand the nature of the diseases, identify the causal agents, and implement appropriate control measures. This chapter explores various ways to classify plant diseases based on different criteria, such as the causal organism, symptoms, host range, type of crops infected, and whether the diseases are infectious or non-infectious.
Basis of Classification
On the basis of various criteria, plant diseases can be classified into the following categories:
1. Causal Organism
2. Symptoms
3. Host Range
4. Crop Plants Infected
5. Infectious vs. Non-infectious Diseases

Arrangement of plants and animals into groups according to their close resemblance, naming and describing them is called classification. Classifying the plants into groups is called systematic botany. The main aim of classification is to name the plant to describe them and to bring out their resemblances in order to throw light on their relationship and common ancestor. It is to indicate primitive and advanced plants systematically.

Need for Classification

It is not possible for anyone to study all the organisms. But if they are grouped in some convenient way the study would become easier as the characters of a particular group or a family would apply to all the individuals of that group. Classification allows us to understand diversity better.

Classification of plants

Entire plant kingdom is divided into four main groups.

1. Thallophyta 2. Bryophyta 3. Pteridophyta 4. Spermatophyta or Phenerogams

The nematode feeding on plant can be divided into above ground feeders and below ground feeders.

I. Above ground feeders

a) Feeding on flower buds, leaves and bulbs

Seed gall nematode : Anguina tritici

Leaf and bud nematode : Aphelenchoides

Stem and buld nematode : Ditylenchus

The nematode feeding on plant can be divided into above ground feeders and below ground feeders.

LAB constitutes a group of gram positive bacteria. They are nonsporulating, nonrespiring but aerotolerant cocci or rods, which produce lactic acid as one of the main fermentation products of carbohydrates, they do not have cytochromes. They belong to the phylum Firmicuttes, class Bacilli and order Lactobacillaceae. The group includes several genera such as Lactobacillus, Lactococcus, Bifidobacterium, Pediococcus, Enterobacter, Corynebacterium, Streptococcus, Leuconostoc etc.

The classification of pyrolysis processes plays a crucial role in understanding and categorizing the various methods used for thermal decomposition of biomass, waste materials, and carbonaceous feedstocks. This chapter provides an in-depth overview of the classification schemes employed in the field of pyrolysis. It discusses the different factors considered for classification, including temperature, heating rate, feedstock, reactor configuration, and operating conditions. Understanding these classifications is essential for selecting the appropriate pyrolysis process based on specific objectives, feedstock availability, and desired product yields.

Objective

1. To classify the various spices and condiments.

Types of classification: spices and condiments are classified on the following basis:

1. Classification on the basis of economic importance
2. Classification on the basis of parts used
3. Classification on the basis of climatic requirements
4. Classification on the basis of life cycle
5. Classification on the basis of taxonomy
6. Botanical classification

Stored grain pests are one of the major constraints in obtaining quality seeds. They cause substantial yield loss in storage conditions affecting both the quality and quantity of the produce. Apart from causing direct loss to the grains, they also make them unfit for consumption through their excreta, scales and wings resulting in development of unpleasant odour (Upadhyay and Ahmad, 2011). They also act as a source of medium for growth of fungi or bacteria (Daglish et al., 2018). The method of infestation of stored gain pests is different from the insect pests infesting crops under field condition. Generally, the infestation of storage pests starts after harvesting. It has been reported that in India, there is a loss of about 14 million tons worth Rs. 7000 crores due to the infestation by different storage pests (Chaubey, 2022). The post-harvest loss in terms of quantity and quality by different storage insect-pests accounts for about 10-30 per cent (Rajasri and Kavitha, 2015; Yaseen et al., 2019).

Introduction

The book has been framed as a text book cum vegetable production manual for both under graduate and post graduate students of Agriculture/ Horticulture as well as commercial vegetable production professionals. This book has been oriented on different management practices of vegetable culture in open field condition viz., Classification of vegetable crops, Management of seedlings in the nursery, Water managent, Plant nutrient management, Pollination management, Integrated pest management, Biological management of diseases, Weed management and Production technology of different vegetable crops.

Classification of vegetable crops

Vegetables are defined as herbaceous plant origin material with generally low calorific value providing micronutrients, vitamins, antioxidants, fibre and induce alkaline reaction inside human body. Vegetable crops are not only botanically different but also their cultural and climatic adaptation shows wide variability. It is, therefore, necessary to classify the vegetable crops for their easy recognition. Vegetable crops can conveniently be classified “Botanically” for the purpose of vegetable breeding and according to “Method of culture” from the point of crop husbandry.

Botanical classification

The crops used for vegetable purpose in the world belong to 1200 species under 78 families and of them, more than 860 species under 59 families belong to dicotyledoneae and about 340 species under 19 families belong to monocotyledoneae. In the tropical and subtropical parts of the world, about 90 species of vegetable crops are cultivated, but hardly 20 of them are commercially important.

In the present botanical classification, over 140 different vegetable crops under 6 monocotyledoneae and 20 dicotyledoneae families have been included.

Classification of Vegetable Crops

Vegetables are defined as herbaceous plant origin product with no calorific value and providing micronutrients, vitamins, antioxidants, fibre and alkaline reaction inside human body. Vegetable crops are not only botanically different but also their cultural and climatic adaptation also shows wide variability. It is, therefore, necessary to classify the vegetable crops for their easy recognition. Vegetable crops can conveniently be classified “Botanically” for the purpose of vegetable breeding and according to “Method of culture” from the point of crop husbandry.

Botanical Classification

Botanical classification involves grouping of plants into kingdom, division, sub-division, phylum, sub-phylum, class, sub-class, order, family, genera, species, sub-species and variety. The broadest group in which vegetables are discussed is family. The genus and species constitute the scientific name. Scientific names are accepted worldwide and there cannot be any confusion as per their nomenclature. All vegetable crops belong to the division Angiospermae. The division Angiospermae has two classes: Monocotyledoneae and Dicotyledoneae.

The crops used for vegetable purpose in the world belong to 1200 species under 78 families and of them, more than 860 species under 59 families belong to dicotyledoneae and about 340 species under 19 families belong to monocotyledoneae. In the tropical and subtropical parts of the world, about 90 species of vegetable crops are cultivated, but hardly 25 of them are commercially important in terms of market demand, development of variety/hybrid and seed production. In the present botanical classification, over 140 different kinds of vegetable crops under 7 monocotyledoneae and 20 dicotyledoneae families have been included.

Quite a large number of vegetable crops are grown in the country either on a commercial scale or limited to backyards of homesteads.  A few crops have similarity while others have dissimilarity in their climatic and soil requirements, parts used, method of cultivation etc. While describing individual vegetables, there is possibility of repetition in many aspects. In order to avoid repetition, it is essential to classify or group them into different classes/groups. Different methods of classification followed in vegetables are described below: 

Olericulture, a Latin word, is used to designate the science, culture and management of vegetable crops. In India, about more than fifty vegetable crops are grown in different parts, depending on their climatic requirement. A number of vegetables have similarity in their method of cultivation, which makes the package of practices followed by the farmers for their cultivation very complicated and brings about a lot of repetition. Whichever the method is adopted for the classification of vegetables can systematize the preparation and presentation of the material to some extent and can avoid the unnecessary duplication of some of the principles and methods of vegetable cultivation. In different vegetables, different plant parts are used as food in different forms and they belong to different botanical families with varying cultural and climatic requirements but common insect-pests and diseases along with their common control measures.

Various methods may be used to classify all the vegetable crops into different categories but no single method of classification would be useful to serve the purpose for different groups of scientists like taxonomists, botanists, physiologists, horticulturists, agronomists, and breeders. Under field conditions, the classification based on cultural practices has been proved the best adaptable and very useful for the growers. Vegetable crops can be classified in the following ways for the convenience of different groups of scientist and growers:

Olericulture, a Latin word, is used to designate the science, culture and management of vegetable crops. In India, about more than fifty vegetable crops are grown in different parts, depending on their climatic requirement. A number of vegetables have similarity in their method of cultivation, which makes the package of practices followed by the farmers for their cultivation very complicated and brings about a lot of repetition. Whichever the method is adopted for the classification of vegetables can systematize the preparation and presentation of the material to some extent and can avoid the unnecessary duplication of some of the principles and methods of vegetable cultivation. In different vegetables, different plant parts are used as food in different forms and they belong to different botanical families with varying cultural and climatic requirements but common insect-pests and diseases along with their common control measures.

Various methods may be used to classify all the vegetable crops into different categories but no single method of classification would be useful to serve the purpose for different groups of scientists like taxonomists, botanists, physiologists, horticulturists, agronomists, and breeders. Under field conditions, the classification based on cultural practices has been proved the best adaptable and very useful for the growers. Vegetable crops can be classified in the following ways for the convenience of different groups of scientist and growers:

Quite a large number of vegetable crops are grown in the country either on a commercial scale or limited to backyards of homesteads. A few crops have similarity while others have dissimilarity in their climatic and soil requirements, parts used, method of cultivation etc. While describing individual vegetables, there is possibility of repetition in many aspects. In order to avoid repetition, it is essential to classify or group them into different classes/groups. Different methods of classification followed in vegetables are described below:

I. Botanical classification

Botanical classification is based on taxonomical relationship among different vegetables. Plant kingdom is divided into four viz. Thallophyta, Bryophyta, Pteridophyta and Spermatophyta. All vegetables belong to Division Angiospermae of Spermatophyta. It is further divided and two classes viz., Monocotylydoneae and Dicotylydoneae.

1. Classification of weeds based on life cycle (Ontogony)

(i) Annuals: Weeds that  complete their life cycle within a year or season are called annual weeds. They are associated with annual crops and propagated mainly through seeds. Annual weeds are subdivided according to the season of prevalence as follows:

(a) Kharif season  annuals or Kharif  weeds: The weeds that grow during the summer and complete their life cycle during Kharif or rainy season are called Kharif season annuals or Kharif weeds. The kharif weeds complete their life cycle during the warm wet season (i.e. from the month of June to September) and attain maturity with the onset of winter and finally dies.

2.1. Based on life span

2.1.1. Annual weeds

Classifying wool is crucial in the textile sector for upholding quality standards, enhancing processing techniques, and ensuring that wool satisfies particular market demands. Precise classification aids in choosing the appropriate wool type for a variety of products, ranging from apparel to carpets, and guarantees uniformity and performance across diverse applications.
Classification of Wool: Wool is categorized in a manner akin to hides and skins, based on its intended application. It is divided into three primary types according to fibre length: combing wool, clothing wool, and carpet wool. Long fibres are combed and twisted to produce worsted yarn, whereas shorter fibres are carded and blended in various directions to create woollens. Carpet wool is characterized by an average fineness of 30 to 50 μm and a medullation percentage between 15% and 68%. The quality of wool is influenced by factors such as breeding conditions, climatic conditions, diet, and overall care. For example, excessive moisture can strip natural grease, while colder climates lead to tougher, heavier fibres. Consequently, wool can be classified in two distinct manners:
A. By the sheep from which it is sourced, and
B. By fleece

Wool is a fibre basically composed of amino acids and have excellent absorbency, moisture regain capacity, tend to warm the human body if used in form of cloths and others, good in elasticity and resiliency but poor in resistance to alkali but acid tolerance is good. To get better utilization of wool, they may be classified into various categories based on their origin, fleece quality, fineness of wool fibres etc.

Weeds are diverse plant species of the ecosystem which can survive adverse condition and reproduce quickly. The global compendium of plants has listed 28000 species as weeds. According to Holm et al (1977) about 8000 weeds species have been reported from agricultural fields in 124 countries and of these, 250 species are considered to be problematic. It is also to be noted that weeds from 12 families constitute 68% of the world’s worst weeds. Within these 12 families, weeds from poaceae, asteraceae and cyperaceae constitute 44% of the world’s worst weeds.

Nanotechnology has emerged as a transformative interdisciplinary field, enabling the design and manipulation of materials at the nanoscale with exceptional physical, chemical, and biological properties. Nanoparticles (NPs), the most fundamental components of nanotechnology, exhibit unique size-dependent characteristics such as high surface area-to-volume ratio, enhanced reactivity, and tunable functionalities that make them valuable in diverse applications including agriculture, medicine, and environmental management. This chapter provides a comprehensive overview of the classification, synthesis, and characterization of NPs. NPs are categorized based on origin, composition, dimensionality, and morphology, encompassing organic, inorganic, and composite forms. The synthesis of NPs follows two major approaches—top-down and bottom-up—employing physical, chemical, and biological methods. Conventional techniques such as ball milling, laser ablation, and chemical reduction are discussed alongside emerging green synthesis strategies that emphasize sustainability and biocompatibility. Characterization techniques including UV–Visible spectroscopy, DLS, SEM, TEM, FTIR, XRD, and AFM are highlighted for determining nanoparticle

2.1 Quantitative Classification

It the data are classified on the basis of phenomenon which is capable of quantitative measurement like age, height, weight, prices, production, income expenditure, sales, profits, etc., it is termed as quantitative classification. The quantitative phenomenon under study is known as variable.  For example the daily incomes of different retail shops in a town may be classified as under.

Floriculture is the aesthetic branch of horticulture that deals with the cultivation of ornamentals, annuals, biennials and perennial plants as well as with their marketing. Flowers symbolize beauty, purity, peace and love. In India, it is a dynamic and expanding industry showing an impressive annual growth rate.

Classification of Living Organisms

The classification of living organisms has passed through several changes and has reached the present stage with the gradual assimilation of more and more knowledge about them. The classification is mainly based on the morphology, anatomy, life style, habits, habitats, metamorphosis and such other characteristics. Though the concept of classification of living organisms was perhaps started by Aristotle between 384 - 322 BC, it was the Swedish Scientist Carl Linnaeus (1788), who presented the classification, which was acceptable to most of the Taxonomists. He propounded the binomial nomenclature of naming each and every organism of animal and plant origin with a genetic and species name. In his classification he was consistent in using Latin names for all the organisms.

Extensive studies have shown that much of the humified material in soil is finely bound to colloidal clay. However, it is uncertain to what proportion of the clay surface in any given soil is coated by organic substances as this will depend on the organic matter content and the type and amount of clay.

The ways in which organic substances are retained in soil are as follows:

1. As insoluble polymeric complexes of humic and fulvic acids.
2. As polymeric complexes of humic and fulvic acids bound together by di- and trivalent cations such as Ca²+, Fe³+ and Al³+.

Organic matter is of immense importance in forming good aggregates in a wide range of soil types, particularly those representing Mollisols, Alfisols, Ultisols and Inceptisols. Organic matter is somewhat less important in the Oxisols where hydrous oxides may play apredominant role. These relationships are depicted in Fig. 13.

Fig. 13.1: Relationship between OM and the formation of soil aggregates

Aggregates do not directly influence plant growth, but they alter the physical and chemical environments in which plant roots grow through their effects on porosity, aeration, moisture retention, etc., when well-irrigated, even fine- textured soils permit adequate exchange of gases with the atmosphere. The polysaccharides of soil have received the greatest attention in producing stable aggregates, but other organic substances bonded to clay through association with Fe or Al may also be involved.

ABSTRACT

Sedimentological studies such as textural, heavy mineral and clay mineralogy have been carried out for Warkalli Formations at Varkala, situated in the southern part of Kerala, India. The X-ray diffraction study reveals that kaolinite is the only clay mineral present in all the samples with trace amounts of gibbsite and goethite. The higher amount of kaolinite and gibbsite indicates warm and humid paleoclimatic conditions. The textural analysis shows that the sediments are moderate to poorly sorted, nearly symmetrical to fine skewed and lepto to mesokurtic in nature. A plot of skewness against sorting shows fluvial trend. The major heavy minerals present in the samples are magnetite, ilmenite, rutile, sillimanite, anatase and zircon. It can be inferred from these studies that these sediments would have been deposited in a lagoon by fluvial action. During that time, the source region has experienced tropical humid climate with mean annual precipitation (MAP) above 200 cm and intensive chemical weathering. Heavy mineral assemblage indicates medium to high grade metamorphic source rocks.

15.1 Introduction

It is important that we understand some terms like clay, mineral, clay mineral, activated clay, and nanocomposite clearly. In fact, “clay” is a soil separate consisting of particles of <2 µm (equivalent to <0.002 mm) in equivalent diameter (Brady & Weil, 2002; pages 18-19) in both USDA and International systems. While in nanotechnology, uniqueness of micro- and nana- aggregates is of crucial consideration. (In Chapter 8: The Colloidal Fraction (Brady & Weil, 2002) size dimensions of minerals are given eliminating any chance of confusion.) Now let us look at some definitions provided in the Glossary of the Clay Minerals Society (CMS) Nomenclature Committee – Clay Science Project (www.clay.org; August 2011).

Structure of Crystalline Clays

Soil clay minerals are of two types: crystalline and amorphous. Crystalline clays are made up of sheets of octahedra and tetrahedra of O and OH. Clays with alternating sheets of aluminium octahedra and silicon tetrahedra, are called, “1:1 clays” or “diphormic clays”. A sheet of octahedra is sandwiched between two sheets of tetrahedra in 2:1 clays which are called as, “triphormic clays”.

The building blocks of clay crystals are called “unit cells”. The geometry of octahedra has 3 voids in each half unit cell, equivalent to 6 negative valences. In order to nullify these 6 negative valences, 6 positive valences are needed. The 6 negative valences can be nullified by 3 divalent cations, one each in the three voids, or by 2 trivalent cations, leaving the third void empty. When trivalent cations such as Fe³+ and Al³+ fill two of the three voids, the clays are called, “dioctahedral clays”. When three divalent cations such as Fe , Mg and Mn fill up all the three voids, such clays are called, “trioctahedral clays”.

2.1 Clean Cultivation

This type of cultivation is extensively followed in India. It involves regular ploughing of the land followed by removal of weeds. Tilling the orchard soil regularly provides a weed free environment in the orchard. Traditional tillage with the spade or hoe involves shallow cultivation and partial burying of weeds. Use of animals for ploughing reduces the labour cost but some superficial tree roots get damaged in ploughing. Tractor drawn tool can be used during initial years when the orchard trees are not fully grown. Branches hanging low, spreading in the inter-row spaces hinders the movements of the tractor even in widely spaced rows at maturity in most of the orchards. Under such situations small power tillers can be used. Tillage controls weeds partly through burying weeds and partly through exposing underground parts of weeds to desiccation. The land around the trunk must be cleaned separately with the help of spade as it is difficult to operate a power implement in the vicinity of the trunk. This is very instrumental in saving soil moisture. It has immense effects on the soil properties. Cleaning removes the protecting layer of vegetation and exposes the soil surface to weathering, and thus reduces the frequency of additions of organic matter to soil. Cultivation physically disturbs soil, mixing upper and lower layers. In this management system, the interspace between the trees is kept clean by tillage by removal of weeds. Clean cultivation by tillage influences the soil aggregate size and stability, porosity and pore size distribution, and the development of sub-surface layers of high bulk density (hard pans). The first change that occurs with tillage is the disruption of established soil pore continuity (Chan and Mead 1989). Organic carbon and nitrogen decline to a new equilibrium value depending on tillage intensity, cropping system and climate.

Indian Government has several developmental programmes to promote agriculture and rural sector. It includes Drought Prone Area Program, Antodaya Programme, Integrated Rural Development Programme, Hill Area Development Programme, Desert Development Programme, Intensive Jawahar Rojgar Yojna and Employment Assurance Scheme, Indira AwaasYojna, Integrated Waste Land Development Programme, National Food Security Mission, National Horticulture Mission, etc. Mahatma Gandhi National Rural Employment Guarantee Scheme (MGNREGS) has the main focus to provide guaranteed employment for 100 days in a year to every rural household. Since 2014, the Swachh Bharat Abhiyan has been a major initiative by the Government of India.

Indian Government has several developmental programmes to promote agriculture and rural sector. It includes Drought Prone Area Program, Antodaya Programme, Integrated Rural Development Programme, Hill Area Development Programme, Desert Development Programme, Intensive Jawahar Rojgar Yojna and Employment Assurance Scheme, Indira Awaas Yojna, Integrated Waste Land Development Programme, National Food Security Mission, National Horticulture Mission, etc. Mahatma Gandhi National Rural Employment Guarantee Scheme (MGNREGS) has the main focus to provide guaranteed employment for 100 days in a year to every rural household. Since 2014, the Swachh Bharat Abhiyan has been a major initiative by the Government of India.
THE FOOD SECUR3ITY BILL
The Food Security Bill is here. Some of the salient features are
Nearly 82 crore (820 m) poor people to get food grains at highly subsidized rate, nearly 20 crore poor in urban areas and 62 crore in rural areas will be eligible to get 5 kg rice, wheat and coarse grains at Rs.3, 2 and 1 respectively. Additionally for pregnant women, there will be a provision for free food for 10 months and for children below 7 years, food will be free. There is one danger point feared in this scheme that in the long run, many farmers will stop farming and go for easier way for casual labour and take food security cover in stead of farming the low production lands. But on the other hand we should look at the solution to this keeping in mind that the Food Security Bill is here and how best we can build on our strength rather than weakness. The areas of strength to look for should be :

One ofthe biggest issues the world is facing today is the lack of clean and pure water. Due to rising water demands, rigid health regulations, and xenobiotic pollutants, traditional wastewater treatment technologies cannot provide safe water. The present era necessitates innovative approaches to wastewater treatment technologies and improved water resource conservation and management materials. By utilizing innovative nanomaterial, nanotechnology guarantees a continuous provision of potable water and contributes to the preservation of water sources. Nanomaterials expedite rapid processes for the purification, conservation, and reuse of wastewater, complementing other enduring industrial methods. 

1. Introduction

Cleaning and grading are the first and vital post harvest operations undertaken to remove foreign and undesirable materials such as crop seed, chaff, mud, stones, straws, immature grains, dust, husk and even iron and steel particles from grains as well as fruits and vegetables and to separate the products into various fractions. Generally, the hand threshing and the traditional handling used in most developing countries cause a larger percentage of foreign matter with these crops. Thus, more cleaning is required. Cleaning is essentially a separation process, in which some difference in physical properties of the contaminants and the food units is exploited. 

Fruits and vegetables are more perishable and generally have a higher value compared to cereals, making them very important in terms of minimizing waste and improving employability in the food industry. The losses in fruits and vegetables are significant, but through effective post-harvest processing, these losses can be reduced, and surplus produce can be better utilized. This processing involves a variety of techniques that prepare fruits and vegetables for conversion into processed foods. The food preservation and processing industry has evolved from being a luxury to an essential sector, playing a crucial role in conserving and enhancing the utilization of fruits and vegetables.
To prevent waste during peak seasons and ensure availability during off-seasons, modern methods of storage and processing are necessary. These techniques allow for both large-scale and small-scale processing, extending the shelf life of produce for better distribution. The ultimate goal of food processing is to apply systematic techniques to preserve, process, package, store, and distribute food in a way that ensures a steady supply of diverse and nutritious food options, thereby improving food intake and nutritional standards, particularly during periods of low availability.
For effective preservation and processing, key prerequisites include cleaning, grading, and sorting the produce based on its maturity level. This ensures that only the highest quality fruits and vegetables are used in the processing chain, maintaining food safety, nutritional value, and consumer acceptability throughout the year.

Fruits and vegetables are more perishable and generally have a higher value compared to cereals, making them very important in terms of minimizing waste and improving employability in the food industry. The losses in fruits and vegetables are significant, but through effective post-harvest processing, these losses can be reduced, and surplus produce can be better utilized. This processing involves a variety of techniques that prepare fruits and vegetables for conversion into processed foods. The food preservation and processing industry has evolved from being a luxury to an essential sector, playing a crucial role in conserving and enhancing the utilization of fruits and vegetables. To prevent waste during peak seasons and ensure availability during off-seasons, modern methods of storage and processing are necessary. These techniques allow for both large-scale and small-scale processing, extending the shelf life of produce for better distribution. The ultimate goal of food processing is to apply systematic techniques to preserve, process, package, store, and distribute food in a way that ensures a steady supply of diverse and nutritious food options, thereby improving food intake and nutritional standards, particularly during periods of low availability.
For effective preservation and processing, key prerequisites include cleaning, grading, and sorting the produce based on its maturity level. This ensures that only the highest quality fruits and vegetables are used in the processing chain, maintaining food safety, nutritional value, and consumer acceptability throughout the year.
CLEANING OF AGRICULTURAL COMMODITIES
Blanching is a unit operation used in food processing to remove contaminating materials from food and prepare the surface for further processing. In vegetable processing, blanching serves the additional purpose of cleaning the product. This process involves briefly exposing the food to heat, typically by immersing it in hot water or steam, which helps to remove dirt, enzymes, and microbial contamination. By doing so, blanching not only improves the quality of the food but also prevents microbial growth during storage or delays in processing. This early removal of contaminants ensures that the remaining bulk of food is preserved and remains safe for consumption throughout its shelf life.

29.1 Introduction
Cleaning is achieved using a cleaning agent designed to remove food, dirt, rust stains, minerals, or other residues. It is crucial to choose the appropriate cleaning agent, as not all are suitable for surfaces that come into contact with food. In a food-processing facility, sanitation involves ensuring that utensils and equipment that come into contact with products are kept clean and sterile. Additionally, clothing, air, packaging materials, and non-contact surfaces like floors, walls, and ceilings must be sanitized to prevent product contamination. Employees’ bodies, especially their hands, can also be sources of contamination, so maintaining high personal hygiene and cleanliness standards is essential. Moisture and heat can lead to microbiological contamination of both products and the environment. Moisture on product-contact surfaces and within products creates a medium where microorganisms can thrive and find nutrients, potentially affecting the safety and quality of milk and dairy products.
29.2 Types of Soil
Cleaning involves removing food residues and other types of soil from surfaces like utensils and equipment used in the dairy and food industries.
• In the dairy-processing sector, the equipment must be cleaned of various types of soil including: liquid milk films, air-dried films, heatprecipitated films, heat-hardened films, milk stone, and other foreign materials.
• Soluble soils will dissolve and be carried away in rinse or wash water. For insoluble soil components, chemical detergents may be needed to either dissolve them or soften them to facilitate easier removal.
• Cleaning or sanitizing the product contact surfaces of dairy equipment involves both washing and sterilizing. It’s important to avoid causing undue wear, erosion, or corrosion to these surfaces, as this can reduce their lifespan

There is no single factor as important in the production of fine quality dairy products as absolute and complete cleanliness.

R.B. Barrett

It is not enough to provide milk for man, it must be high quality milk. It would be impossible to provide man with milk and milk products of superior quality if we were unable to remove milk soil and to kill residual microorganisms. Respectively, these are the processes of cleaning and sanitizing.

To successfully provide the atmosphere for proper food safety, the basics must be thoroughly understood. The basics of food safety begin with good understanding of sanitation processes, food-handling procedures that protect from, or eliminate cross contamination problems and specific attention to inspection of and follow up for all processes. Food safety activities need to be programmed into available time of day scheduling just as production requirements do. Whether special personnel or separate shifts handle cleaning responsibilities or you clean as you go on the production line, time must be made available. Safe products leaving the facility must be the watch word of all employees involved with the process.

In order to ensure safe food supply a high level of sanitation should be maintained throughout the food production chain. The word ‘sanitation’ is derived from the Latin word “sanitas” which means “health”. To further apply this word to the food industry, sanitation is the creation and maintenance of hygienic and healthful conditions when processing, preparing and handling food. Sanitation is the application of science to provide wholesome food handled in a hygienic environment by healthy food handlers to prevent contamination by food spoilage microorganisms. Effective sanitation refers to the mechanisms, which accomplish these goals.

Cleaning and sanitisation are the two processes employed in dairy industry to ensure hygiene and product safety. The safety of milk and milk products is a very important aspect and every attempt should be made, during processing, to minimize contamination through handling and processing equipments. The accumulated dried milk solids (milk stones) consist largely of calcium phosphate, milk proteins (precipitated, coagulated and baked on by heat) and insoluble calcium salts from water and washing detergents. The surface can also contain biofilms, which are formed by the incorporation of bacteria into the accumulated inorganic and organic materials that attach to most surfaces. With time and in the presence of nutrients, a biofilm and the bacteria within the biofilm will grow and become strongly attached to the surface. The removal of dairy soil, milk stones as well biofilms is the prime objective of the cleaning process. International Dairy Federation (IDF) defines a clean surface as one which is free from residual film or soil that will not contaminate the food products coming in contact with it.

While cleaning refers to the removal of soil from the surface of the equipment, sanitisation implies destruction of all pathogenic and almost all non-pathogenic organisms. Cleaning and sanitisation are complimentary processes. Either of the processes alone will not achieve the desired result, which is to leave the surface as free as possible from soil and viable organisms. In actual practice cleaning and sanitisation overlap to some extent, as during cleaning a high proportion of bacteria are destroyed and others get removed in the detergent solution. Inadequate or faulty cleaning and sanitisation can have serious consequences, as milk is a prefect nutrient in which bacteria can multiply. A thorough understanding of the cleaning methods is, therefore, necessary for economic production of high quality food products.

Cleaning and sanitizing of dairy plants is essential for providing safe milk products to the consumers as well as for ensuring the good shelf life of these products. It ensures cleanliness, hygiene of the equipments and surroundings and also ensures that the products meet the safety standards. Cleaning of dairy plant consists of broadly of removing the soil from the surface of the equipment by dissolving or suspending the soil in a warm solution of suitable cleaning agents. In the dairy industry, the soil is primarily milk and milk product residues which may be more or less modified by processing treatment. 
Milk and milk product residues are complex mixtures of milk sugar, fat, proteins and mineral salts. Some of these solids are present in emulsion, some are in a colloidal state, and others are in true solution. When milk products are heated in vats or pumped through sanitary pipe lines or over coolers, the metal or glass surfaces become coated with milk remains, which, if allowed to dry, may be difficult to remove.