eChapters

1. Damping off
Diagnostic Symptoms
• Disease occurs in two stages, i.e. the pre-emergence and the postemergence phase.
• In the pre-emergence phase, the seedlings are killed just before they reach the soil surface.
• The young radical and the plumule are killed and there is complete rotting of the seedlings.
• The post-emergence phase is characterized by the infection of the young, juvenile tissues of the collar at the ground level.
• The infected tissues become soft and water soaked. The seedlings topple over or collapse (Fig.1)
Etiology
• Pathogen; Pythium aphanidermatum.
• The fungus has a characteristic mycelium, which coenocytic, hyaline, freely branching and thick hyphae.
• It reproduces both asexually and sexually.

50.1. Aim

To prepare products from tomato fruits.

50.2. Theory

Commercial products from tomatoes include juice, puree and paste. Processing of tomato is now practiced from home scale level to a large scale enterprise. As a semi finished product, tomato puree is prepared on a small scale while at large scale tomato paste has gained commercial significance. Both puree and paste are used for preparation of different finished products like ketchup, juice, soup etc. The method for preparation of these products are well standardized, however, some modification with respect to recipes are made in the processing plants owing to variation in the quality of the raw material. The method for preparation and recipe of different tomato products are as under:

50.3. Raw material, ingredients and utensils required

1. Tomatoes.

2. Stainless steel knives, utensils, juicer, pulper, glass bottles, corking machine, crown corks, muslin cloth, boiler/gas bhatti, etc.

51.1. Aim

To prepare products from tomato fruits.

51.2. Theory

Commercial products from tomatoes include ketchup, soup, cocktail, chutney, canned and dehydrated tomatoes. Processing of tomato is now practiced from home scale level to a large scale enterprise. Both puree and paste are used for preparation of different finished products like ketchup, canned and dehydrated products, soup etc. The method for preparation of these products are well standardized, however, some modification with respect to recipes are made in the processing plants owing to variation in the quality of the raw material. The method for preparation and recipe of different tomato products are as under:

51.3. Raw material, ingredients and utensils required

1. Tomatoes, sugar, salt, sodium benzoate etc.

2. Stainless steel knives, utensils, juicer, pulper, glass bottles, corking machine, crown corks, muslin cloth, boiler/gas bhatti, etc.

Essentials for Quality Product Preparation

Plant ripened red tomatoes should be selected. Yellow and green fruits on processing yield dull colour and turn brown due to oxidation.

Never use iron equipment for processing. Lycopene oxidizes and turns brown when comes in contact with iron. It also forms black compounds with the tannins present in tomatoes or the spices which are used for product preparation.

Avoid prolonged heating and cool immediately to avoid over-cooking.

Sauce/Ketchup:-Fully ripe red fruits are selected, all green and blemish part are discarded. It is made from strained tomato juice or pulp and spices, salt, sugar and vinegar with or without onion and garlic and contains not less than 12% tomato solid and 25% total solid.

Ingredient of tomato sauce/ketchup: Tomato pulp 1kg, sugar 75g, salt 10g, onion chopped 50g, ginger chopped 10g, garlic chopped 5g, red chilli powder 5g, cinnamon, cardamom large, aniseed, cumin, black pepper powder 10g each, clove headless 5 number, vinegar 25ml or glacial acetic acid 5ml and sodium benzoate 0.25g/kg final product.

I. FILL UPS

1. Tomato is a _____ pollinated crop.
2. _____ pigment is responsible for red colour of tomato.
3. Seed rate recommended for tomato is _____.
4. Isolation distance recommended for foundation seeds of tomato is _____.
5. Spacing adopted for tomato is _____.

Fruit borer: Helicoverpa armigera: Noctuidae

This is a medium sized moth yellowish brown in colour with a wing

span of about 3 cm and a body length up to 1.4 cm. There is a dark speck and a dark area on the outer margin of each forewing. The forewings also have greyish wavy lines and black spots of different sizes on the upper side.

Tomato (Lycopersicum esculentum Miller, 2n = 2x = 24, also known as Solanum lycopersicum, Family Solanaceae) has been the leading vegetable crop globally. Tomato genome is composed of approximately 950 Mb of DNA, more than 75% of which is heterochromatin and largely devoid of genes. The global production of tomato in 2017 has been 182 million tons from 5 million ha area giving a productivity of 36.4 tons/ha. Top 10 countries in tomato production in descending order are China, India, Turkey, USA, Egypt, Iran, Italy, Spain, Mexico and Brazil. Tomato is planted almost throughout the year in different parts of India in an area of 8 lakh ha (0. 8 million ha) with production of 20.8 million tons giving a productivity of 26 ton/ha. Tomato area in India is almost 10% of total vegetable area. The states accounting for major tomato production in India are Andhra Pradesh, Orissa, Telangana, Madhya Pradesh, Karnataka, Maharashtra, West Bengal, Chhattisgarh, Bihar, Gujarat, and Himachal Pradesh.

Out of total area, about 78% is planted with F₁ hybrid seed while remaining 22% of the area still goes to open-pollinated varieties. The average productivity of tomato close to 26 tons/ha is still very low compared with the global productivity of 36.4 tons/ha. However, with the introduction of high performing and disease resistant hybrids, the productivity and production are continuously improving. Most of hybrid tomato seed (95 tons) is sold by the private seed companies. There are more than 375 tomato hybrids in the commercial chain in India produced and marketed by different companies. About 50 hybrids out of these 375 hybrids are being grown on more than 80% of the area under tomato in India. Leading companies in tomato hybrid seed segment are Seminis (Bayer), Syngenta, Rasi HyVeg, and Namdhari (NHB, 2015; Kapur, 2016).

Tomato is relatively recent addition to the world’s vegetable crops. Now became one of the most important vegetable crops and is popular & widely consumed. It is being grown extensively in USA, China, India, France, Israel and Netherland.
 
It is used in fresh and processed form. Among the vegetables maximum attempts have been made to improve this crop because of its short duration, easy cultivation and large number of seeds per fruit and this has made it an ideal crop for many research works. An exclusive Tomato Genetics Co-operative located in University of California, USA, published genetic information on the crop and maintains a large number of     collections which have already been thoroughly catalogued.
 
Origin and Distribution: Native of Peru in South America and spread to North America by migrating birds. Largest number of wild tomato forms is present in Mexico. Spanish Priests introduced it to Europe in around 1550. In Europe it is known as Poma amoris = Amorous apple (Love apple). Wild relatives found in narrow elongated mountainous regions of Andes in Peru, Ecuador and Bolivia and Galapagos islands. Domestication and cultivation of tomato appears to have first occurred outside its centre or origin. Domestication of tomato was first done by Mexican people i.e. Red Indians, which is considered as secondary center of origin. Now cultivated tomato is common in Peru but recently added to their diet.

Tomato (Solanum lycopersicum L.) is one of the most commercially important vegetable crops globally, with a significant demand for high-yielding hybrids and improved open-pollinated varieties. Efficient seed production methodologies play a crucial role in ensuring the availability of genetically pure and high-quality seeds for commercial cultivation. Traditional hand emasculation and pollination remain widely used despite being labor intensive, given their economic feasibility due to high seed yield per fruit. Hybrid seed production is further refined through mechanized pollen collection and controlled pollination techniques, enhancing efficiency. Seed quality management, including rigorous isolation protocols, field inspections, and breeder and foundation seed production standards, ensures genetic purity and viability. Advances in molecular breeding and the application of marker-assisted selection (MAS) have enhanced the efficiency of parental line development and hybrid seed production. This chapter provides an in-depth review of tomato seed production methodologies, covering botanical characteristics, genetic resources, and breeding objectives aimed at improving disease resistance, abiotic stress tolerance, and fruit quality traits. It further discusses varietal advancements in the public and private sectors, highlighting elite hybrids and open-pollinated cultivars tailored for different agro-climatic conditions. Additionally, the package of practices for seed production in tomato underscores the importance of isolation, field inspections, seed extraction methods, processing techniques, and quality assurance standards to maintain genetic purity and seed viability.

Origin, domestication and adaptation in India
Tomato was classified under Lycopersicon for several years although, initially Linnaeus (1753) classified it in the genus Solanum. Recently, molecular studies provided new data on the relationships of tomato-potato and based on these results, tomato has been again assigned to the genus Solanum. Solanum section Lycopersicon includes the cultivated tomato (Solanum lycopersicum) and its wild relatives, Solanum lycopersicum being the only domesticated species. The wild cherry tomato, Solanum lycopersicum var cerasiforme, the ancestor of the modern cultivated tomato has been originated in Peru-Ecuador-Bolivia region of the Andes. The Veracruz-Puebla region of Mexico is the centre of domestication of the cultivated tomato. From Mexico, tomato was taken to Italy, Spain, Portugal and other European countries, Africa and Middle East by the explorers in the 16th century. It was taken to Philippines after its discovery by Magellan in 1521, and from there it was taken to other Asian countries. Tomatoes did not have an easy passage even in Europe. The fruit got tagged as the “poison apple” in Britain, France, Spain and other European countries. Tomato moved to the USA from northern Europe around 1781 where it was first grown by Thomas Jefferson in Virginia.

At the back of the mouth on each side there are two small lymphoid organs known as tonsils. Normally they are about the size of a Lima bean, but they can become very larger if severely infected. The lingual tonsil is located at the back of the tongue close to other tonsils. There are two more lymphoid masses of tissue behind the soft palate known as adenoids. They make protective ring at the back of the nose & throat to keep infection from spreading throughout the body. Most of the germs enter through the mouth, nose and throat.

After becoming an adult the adenoids have largely disappeared. In childhood both the tonsils and adenoids may become very large. It makes swallowing painful and breathing difficult. In childhood large tonsils are common. The main reason of infection is due to certain types of streptococcus germs. Mouth breathing, nasal speech, a chronic cough are caused by the enlarged adenoids. The patient may also have halitosis or bad breath.

Introduction

The nursery is an area where tender seedlings are raised and conditioned before planting out in transplant beds or directly in the field. The increasing demand for quality planting material has up stepped the nursery business in many countries. The sophisticated technology, research and novel production approaches has transformed the traditional horticultural nursery to a technology intensive business. The tools and accessories associated with nursery production helps in aiding productivity of the nursery. The colour-coded and labelled plant materials, textured pots etc. are fascinating to consumers, indirectly increasing the salability of the plants and profitability of the enterprise. 

Introduction

Challenges in agriculture and natural resource management in the past have prompted changes in agricultural education, research, and extension globally. The sustainable development of agriculture in a country largely depends on the effectiveness of its agricultural extension strategies, encompassing approaches, service delivery, methodology, and processes. The desired outcome of agricultural development is farmers’ outcomes, achievable through engagement, learning, and participation in research and extension processes. Agricultural extension played a significant role in the green revolution by providing farming communities with appropriate technologies and optimal cropping practices. This helped countries transition from being food deficit to food exporting (Ratnakar, 2016). Additionally, extension services play a crucial role in expanding knowledge, skills, and attitudes about the management of socio-economic-agricultural practices by understanding the existing techno political ecosystem and exploring a basket of technology alternatives for making informed decisions.

The major tuber crops cultivated in tropical countries are: cassava (Manihot esculenta Crantz), sweet potato (Ipomoea batatas L.), yams (Dioscorea sp.), aroids (Amorphophallus, Alocasia, Xanthosoma, Colocasia ), Canna edulis, arrowroot, Chinese potato, winged bean and yam bean. In addition to this, there are a number of under exploited and under utilized tuber crops grown as wild cultivars having medicinal and pharmaceutical applications. Processing and utilization of tuber crops as food are traditional with both primitive as well as modern equipments being in use (Nanda and Kurup, 1994). One of the oldest traditional processing tools is a stone pounder for making poi from taro in Hawaii.

For maintenance of garden, a person should well acquainted with different types of tools and implements and their uses. A tool and implement is any physical item that can be used to achieve a goal, describe a procedure or process with a specific purpose. Tools that are used in particular fields or activities may have different designations such as instrument, utensil, implement, machine or apparatus. The set of tools needed to achieve a goal is called equipment. The knowledge of constructing, obtaining and using tools is technology. Varieties of implements and tools are required for carrying out the various garden operations like digging, breaking soil, clods, removal of weeds, levelling of ground, mowing lawns, planting of bulbs, layering and grafting, manuring etc. Some of the gardening hand tools are spades, garden forks, pitchfork, hoes, ploughs, shovels, pruners and ice choppers. Many hand tools have been replaced by electronic tools but gardening and landscaping hand tools are still preferred, because they are easier to use and cheaper. Garden tools can be made up of wood, metal or plastics. Landscaping and Gardening is one of the most rewarding and stress-relieving hobbies. The most common garden tool set includes: shovels, rakes, spades, diggers, trowels, etc. Gardening tools can be power or hand driven. There are some garden tools commonly used (Table 1).

Sickle: Used for cutting grass, fodder and harvesting crop. Sickle made of steel is better and lasts longer.

In dryland areas, moisture conservation accounts prime most important concept for maximizing productivity of dryland crops. Varied topographic and agro- climatic conditions ranging from arid to semi-arid climates with high evaporation because of varied temperature regimes permit the cultivation of drought resistance crops. Reducing the cost of cultivation without compromising the socio-economic status of farmers is prime importance. Conservation of moisture by reducing the weed menace is great task performed by the dryland farmers. Under such situations, effective utilization of dryland tools and implements used are of a primitive nature throughout the dryland farmers for higher factor productivity. Traditional farm tools and implements for self-sustenance have been adapted through experience over generations to meet emerging socio- economic and farming challenges.

Relatively small yields consequently larger areas must be farmed for a given return and the successful exploration of dryfarming requires the adoption of methods. The methods which enable farmers to do the maximum effective work with the smallest expenditure of energy. The type of soils and topographic conditions largely influence the type, size and shape of particular tillage tools/ implements among the dryland farmers. The following is a list of local tools/ implements found in the various dryland regions.

Introduction

The capabilities and effort to collect the geographic data has increased dramatically in the last decade to cope up with the increasing demand for the support of decision making and planning process in the state, national and global level.  From the Government sector, there is a need for spatial data to make quick responses to natural disasters, industrial accidents and environmental crises as actions will be decided based on geography. There is constant pressure to make wise decisions in a more time and cost effective and efficient manner. Accurate and current geospatial data are critical to these decisions.

Scientific research is always based on observable and measurable facts. This applies to physical as well as humanitarian fields of science. In order to investigate social or psychological phenomenon, most of the times we need quantified information related to the phenomenon under investigation. In order to secure this data, we need one or more method/ means of collecting observable/measurable data.