eChapters

14.1 Introduction

The observation of phytosociology deals with the germination of growth on tree species in the industrial effluents. It shall be calculated germination potential based on germination capablility of the seeds. The growth parameters are measured then calculated leaf weight ratio, stem weight ratio, root weight ratio, top dry weight, sturdiness quatient, volume index and quality index. The following sub chapters dealing with formulae used to calculate the above parameters. The data so collected is then analyzed. The usual methods, which are employed in analysing the data, are averages, dispersion, skew ness, correlation, etc. The leaf weight ratio, stem weight ratio and root weight ratio are calculated by using the following formulae made by Kumaran (1991).

Aim:- To know the measurement for preparation of an appropriate size of ring of Thomas splint for a large animal.

Objective: Measurement of an appropriate size Thomas splint essential to avoid complications like tight fitting which may affect bone healing.

Materials required: 6mm G.l. wire, jute thread

Phenols constitute a class of aromatic organic compounds having at least one hydroxyl group attached directly to the benzene ring.

Definition: Bio-aesthetic planning is recognized as the aesthetic branch of horticulture which deals with planting of ornamental plants to create a picturesque effect.

The term bio-aesthetic planning was coined by Lancelot Hogben. Egyptians were the first to adopt this type of planning in their cities. In India, M.S. Randhava was the flag bearer of bio-aesthetic planning.

India is one of the twelve mega-biodiversity countries of the world with 46,000 plant species and 81,000 animal species described so far from 70% of the total geographical area surveyed so far. Bio-aesthetic planned city in South India is Bengaluru and in North India is Chandigarh (Punjab and Haryana).

Scope: Benefits like environmental, ecological and socio-economic realizes a greater scope of bio-aesthetic planning. Potential of plants in combating pollution has not been utilized effectively so far. In bio-aesthetics, efforts should be concentrated to maintain for the next millennium, natural landscapes which appear healthy, harmonious, diverse and unique. Thus, bio-aesthetic planning can play an important role in environmental amelioration of urban and industrial areas along with their beautification.

Concept: Man has aesthetic sense and makes efforts to create orderliness and beauty. Natural forms, colours and textures have inspired most of the human art. Fulfilling recreational needs through ornamental plants and wild animals brings the idea of bio-aesthetic planning.

Interpersonal Behavior is the study of one’s own perception, knowledge, attitude & motivation and how these affect one’s behavior to the self & with others. It is characterized mainly by 3 factors. A. Communication skill (Knowledge / literacy / intelligence, Listening skill, Verbal skill and Active listening/feedback). B. Emotional intelligence (Self-awareness and Emotional maturity) C. Social skill (Good eye contact, Body language and Empathy/ understanding & assimilating ability). For Understanding Interpersonal Behaviors, Behavioral scientists recommend the use of Johari Window & Transactional Analysis (TA).

Johari Window is a psychological too created by Joseph Luft& Harry Ingham in 1955 in USA.. It helps people to understand their better interpersonal relations & communication. The Johari Window model is also referred to as a ‘disclosure/feedback model of self-awareness’, and by some people an ‘information processing tool’. The Johari Window actually represents information - feelings, experience, views, attitudes, skills, intentions, motivation, etc - within or about a person - in relation to their group, from four perspectives. Johari window four quadrants: 1. what is known by the person about him/herself and is also known by others - open area, open self, free area, free self, or ‘the arena’. 2. what is unknown by the person about him/herself but which others know - blind area, blind self, or ‘blind spot‘. 3. what the person knows about him/herself that others do not know - hidden area, hidden self, avoided area, avoided self or ‘facade‘. 4. What is unknown by the person about him/herself and is also unknown by others - unknown area or unknown self.

As mentioned above Bougainvillea is one of the most widely grown important perennial ornamental shrubs with numerous attractive plant colour (leaf) and shape, and bract colours and shape. It is very popular for its multipurpose use. Inspite of beautiful bract colour it can not be enjoyed as cut flower as its shelf-life is very limited. Bracts start drooping within few minutes after cut from the main plant. Dehydration techniques have been developed at CSIR-N.B.R.I., Lucknow, by which flowers and foliage retain their fresh look for several months or even years after dehydration. Their original shapes, colour and size remain as they were before dehydration and, thus, making them highly suitable raw materials for interior decoration and may be enjoyed for a long time and can be used for any occasion. NBRI has standardized two methods viz. Press Drying and Embedding (drying through embedding in sand and silica gel and drying using hot air oven, microwave oven and solar cooker). Bougainvillea leaves and bracts can be dehydrated beautifully by both the methods and the dried products are utilized for preparation of different types of commercial decorative items. 

Indicaion

To know the importance and method of net fabrication in large animals thomas splint. Objective;

To make the application of thomas splint lightest.

To avoid use of plaser of pahs bandage.

To prevent possible all direction of the immobilised limb in thomas splint.

Fungicides are only allowed after years of intensive testing for effectiveness against a variety of plant plant. When a disease is stated on the label of a fungicide, it can be presumed that the active ingredient inhibits pathogen growth and limits the occurrence and spread of disease within acceptable levels of control. Fungicides do not always perform as predicted in practice. Not because the active ingredient is useless, but because of other factors that influence its performance. Consider everything from light and temperature to humidity and pH, and remember that all of these variables affect the active ingredients. Find information on these and other topics that can help you succeed in disease control below.

1. Identification: The most crucial first step towards successful disease control is correctly recognising the condition. Failure to diagnose disease can lead to misplaced or inappropriately scheduled controls.

Aim: To secure the foot on the distal end of Thomas splint.

Procedure

1. Foot is placed upon the distal end of Thomas splint.
2. The foot of the animal is wrapped V’- two round with bandage cloth.(Fig.1)
3. 2^nd round of bandage cloth is wrapped around the distal end of Thomas splint.(Fig.2)
4. In 3^rd attempt, the bandage roll is taken from the ground level of the foot & including the distal end of foot.(Fig.3)
5. The bandage roll is taken through the gap between anterior end of Thomas splint.(Fig.3)
6. In 4th attempt, the bandage roll is taken from the volar or plantar aspect of the limb and passed upon the ground level of foot as well as the distal end of Thomas splint.(Fig.4)
7. Final 2 rounds of bandage cloth is wrapped through entire surface of foot.

Reference: Tyagi R.P.S. and Singh J, (2013), Ruminant Surgery, CBS Publishers, New Delhi, pp-353,354

When any serious work is undertaken involving the use of living cultures it is necessary to keep these alive for use during the work and for future reference.

This can be done either by growing on a suitable substrate and transferring to fresh media, as the nutrient is used up or by treating the cultures in some way, which halts metabolism until they are revived for use. The former method is time consuming and cultures are at risk whenever they are handled, so various means are devised which can lengthen the periods between sub culturing. The latter methods tend to be complex and expensive.

Strobilurins are a group of compounds used as fungicides in agriculture. They belong to the larger group of QoI inhibitors that inhibit the respiratory chain at the complex III level.Common strobilurins include azoxystrobin, cresoxime methyl, picoxystrobin, fluoxastrobin, oryzastrobin, dimoxystrobin, pyraclostrobin, and trifloxystrobin.Strobilurin represents an important development of fungal-based fungicides and is derived from the fungus Strobilurus tenacellus.They have an inhibitory effect on other fungi and reduce nutrient competition.They inhibit mitochondrial electron transport, disrupt energy metabolism, and prevent target fungal growth. Strobilurin is the wonder fungicide ever developed with a new MOA and mobility that qualify it as a unique new generation of fungicides controlling different classes of pathogens.

In India, the procurement and disposal of food grains are governed by several guidelines to ensure food security and fair market practices. Procurement is typically managed by government agencies like the Food Corporation of India (FCI), which purchases grains directly from farmers at minimum support prices (MSP) to stabilize market prices. Farmers are encouraged to sell their produce through designated government procurement centers, ensuring fair prices.
The quality of food grains is a key consideration in procurement. Grains are tested for moisture content, cleanliness, and pest infestation before being accepted. Once procured, the grains are stored in government warehouses, with regular inspections to prevent spoilage and pest damage. For disposal, food grains are distributed through public distribution systems (PDS) to ensure availability to consumers at subsidized rates. Any surplus grains may be sold in open markets, or occasionally exported, to maintain a balance in supply and demand. Effective management ensures food security and minimizes wastage.
PROCUREMENT POLICY OF WHEAT AND RICE
State Government agencies and the Food Corporation of India (FCI) are responsible for purchasing wheat and paddy within the designated period, ensuring that the products meet the prescribed Fair Average Quality (FAQ) specifications and are procured at the Minimum Support Price (MSP) for the Central Pool. This procurement supports the distribution of food under the National Food Security Act (NFSA) and other welfare schemes (OWS).
The Government of India (GoI), in consultation with State Governments and FCI, finalizes procurement estimates for wheat and paddy before each marketing season. These estimates are based on anticipated production, marketable surplus, and the agricultural crop pattern. The procurement of paddy and wheat is carried out under both the Decentralized Procurement System (DCP) and the Non-DCP system.

Common Maintenance

 • Clean the exterior surface with a brush or cotton waste and plenty of water or kerosene oil.

 • Lubricate or lubricate the moving or rubbing surfaces of parts as needed.

 • Filter the chemical solution/fuel oil mixture as it is poured into the tanks. Make the caps or lids leak-proof by using gaskets.

 • Flush the equipment with clean water to clean the insides of containers, tubes, and nozzles.

Care and Maintenance of Hand Sprayer & Duster

• Dusters should be made of dry and sieved dust.

 • Grease the duster gear box once a month.

 • Clean the duster after use by removing all dust from the hopper.

 • Oil the sprayer’s cup and bucket washers on a regular basis.

 • After completing the day’s work, cleanse the spray tank discharge lines and nozzles with clean water.

Introduction

The agrochemical sector has been critical in enhancing agricultural productivity and output. Let’s look at the challenges that the agrochemical sector is facing and how they might be solved to ensure a brighter future.

Opportunities

1. Increase in irrigated area: Every year, around 0.5 million hectares of irrigated land are added as a result of the government’s ongoing efforts to make water available for irrigation. This is anticipated to boost production and increase farmer income. As a result, agrochemical consumption is expected to rise.

2. Changing food and consumption trends: Changes in consumption patterns and demand for a wide range of fruits and vegetables may drive farmers to employ more modern agricultural practises in order to fetch a premium for such produce. This segment is predicted to result in a 2% to 3% increase in agrochemical consumption.

Roughly one-third of the food produced globally is lost or wasted. The India Agricultural Research Data Book from 2004 states that 30% of fruits and vegetables are wasted. Based on an estimated 150 million tonnes of fruit and vegetable output in India, 50 million tonnes of trash are produced annually.

The quality of fruits and vegetables starts to decline as soon as they are removed from their natural source of nutrients. Artificial ripening chemicals are used to speed up the harvesting process, but they also degrade the product and have long-term negative health impacts. Mangoes, for instance, mature rapidly once calcium carbonate is injected into them. Chemicals such as copper sulphate, rhodamine oxide, malachite green, and lethal carbide are frequently utilised to highlight the colour and freshness of vegetables.

Definition

Digital tender include superficial digital flexor, DDF & suspensory ligament which is situated in volar & plantar upset of metacarpus and metatarsus. These tendons are generally transected during ploughing or intensional approach (Fig.1).

Sign

After cutting of these tendon the foot became flat and animal bears weight on fetlock is can’t able to walk freely.

Food preservation has evolved from traditional household practices to an interdisciplinary field incorporating microbiology, biochemistry, engineering, biotechnology, packaging, nanotechnology and digital intelligence. The book demonstrates that food stability can increasingly be achieved without excessive reliance on synthetic chemical preservatives. Effective preservation requires control of microbial growth, enzyme activity, oxidation, moisture, temperature and environmental exposure while protecting sensory and nutritional quality. Traditional practices remain scientifically valuable, while thermal, non-thermal, biological, packaging and digital technologies offer new possibilities. Future food systems will depend on carefully designed combinations of these approaches to improve safety, shelf life, sustainability, traceability and consumer acceptance while overcoming cost, regulatory and scalability challenges.

Chemical changes occur during oven-drying because of the direct effect of high temperature, or of enzymic or bacterial changes during the early stages of drying, or of loss of volatile consitituents. Feeds containing molasses should be ground in a mortar.

Dried materials should be ground to pass 1 mm sieve. Samples expected to moisture during the treatments are usually predried. If wet samples are used directly in the assay, sufficient large quantity has to weighted out. In the first stage, roughages about 250-1000g are used, somewhat dependent upon homogeneity and moisture content of the wet material. These samples are weighted into trays and dried in draft oven at 60-70ºC. The dry samples are then again weighed, determined the moisture content. The trays are then left to equilibrate in air at room temperature for two days. before a second reweighing of the trays with samples. Then the sample is milled and filled into airtight containers and labelled as dry samples.

Miles to go for uplifting the entire population above the poverty line. But the picture was different in ancient times. As life style was simple, all amenities required in daily life were available within the villages. In need social system used to spread its helping hand towards the distressed. But the stability of the system becomes disturbed by invasion of foreigners and exploitation of foreign rulers.

In the British period series of famines from 1875 to 1901, numbering 18 out of a total 3 3 during the whole 19^th Century, the Government was compelled to appoint some Commissions and imposed some acts and established Development Departments like Agriculture, Animal Husbandry and Veterinary irrigation etc. The journey for rural development stated from here by Government.

Q fever: Q fever is caused by a rickettsia like Organism (RLO), a parasitic organism falling between bacteria and viruses. It is a disease that is characterized by high fever, chills, muscular pains, headache, and sometimes pneumonia, that is caused by a rickettsia (Coxiella burnetii) of which domestic animals serve as reservoirs, and that is transmitted to humans especially by inhalation of infective airborne bacteria as in contaminated dust.

Q value: It is the quantity of energy released in a nuclear reaction expressed in million electron volts (MeV).

Q10 value: The number of times a reaction rate change with a 10oC change in temperature is called Q10 value. If reaction rate doubles with 10oC change in temperature, Q10 = 2. It is also called temperature quotient.

Q-enzyme: It is a branching enzyme responsible for formation of 1-6 bonds in amylopectin.

QHV process: It stands for Quality Has Value Process.