eChapters

Translocations

Chromosomes occasionally undergo spontaneous rupture or can be induced to rupture in high frequency by ionizing radiation. The broken ends of such chromosomes behave as though they were ‘sticky’ and may rejoin into non- homologous combinations giving rise to translocations. The most common type of translocation is reciprocal translocation which involves the exchange of segments between two non-homologous chromosomes. Translocations change only the arrangement of genes in the chromosomes, not the quality or quantity of genes. For this reason, they are sometimes referred to as chromosomal rearrangements. Individuals carrying such rearrangements should be phenotypically entirely normal unless the relations of a gene or genes to adjacent genes affect the phenotypic expression (position effect). The first translocation was discovered by Bridges in 1923 in D. melanogaster.

The genetic techniques for detecting and studying translocations will be more easily understood when the cytological phenomena produced by translocations are known. Suppose two chromosomes having respectively the genes ABCDEF and GHIJKL exchange sections and give rise to translocation chromosomes ABCJKL and GHIDEF. The individual thus formed receives from one of the parents the normal and from the other parent the translocation chromosome. Such an individual is a translocation heterozygote (Fig. 36.1).

It is commonly spread by coitus and also by licking and rubbing of the affected area. It is more common in active breeding dogs.

Transmission electron microscope (TEM)

The transmission electron microscope (TEM) operates on the same basic principles as the light microscope but uses electrons instead of light. What you can see with a light microscope is limited by the wavelength of light. TEMs use electrons as “light source” and their much lower wavelength makes it possible to get a resolution a thousand times better than with a light microscope.

We can see objects to the order of a few angstrom (10^-10 m). For example, we can study small details in the cell or different materials down to near atomic levels. The possibility for high magnifications has made the TEM a valuable tool in both medical, biological and materials research.

13.1 Introduction and Physical Principles

A microscope is a tool that enables the user to see objects at a magnification greater than the actual specimen. Resolution and magnifying power are the two integral aspects of microscopy. Resolution is a measure of capability of an image forming system to separate images of adjacent objects. The resolving power (8) is numerically defined as d = 0.61l/n sin a, where,  l is the wavelength of the light, n is the index of refraction of the medium between the specimen and lens, a is half the angle of the cone of light from the specimen plane accepted by the front surface of lens and n sin a is the numerical aperture (NA). The NA represents the light gathering power of the lens aperture or in other words, the measure of obliquity of rays which the lens can accept and utlilize and is limited by blurring of image due to spherical aberration of the lens.

Electron-microscopy, as one of the several tools in diagnostic pathology and cell biology has contributed significantly to reveal several unimagined structures in modern era of science and technology. Several branches of biology and biomedical sciences like anatomy, pathology, physiology, biochemistry, microbiology rely on the transmission electron-microscope. This is used not only to visualize biological materials, but also to analyze the chemical makeup and physical properties of biological materials. Correlate electron microscopic and biochemical studies of cellular processes transcended the boundaries between structurally and functionally oriented sciences. The first electronmicroscope was developed by Max Knoll and Ernst Ruska in 1932 in Germany. Ruska’s efforts were appreciated by awarding him Noble Prize in Physics in 1986. The Siemens Corporation introduced the first commercial transmission electron- microscope in 1938-39 and its commercial marketing started in 1940 by different manufacturers like Hitachi (Japan), JEOL (Japan), Philips (Holland), Zeiss (Germany). Transmission electron-microscope projects electrons through a very thin section of tissue to produce a two dimensional image on a phosphorescent screen. The brightness of a particular area of the image is proportional to the number of electrons that are transmitted through the specimen. A resolution of 0.2 nm can be achieved in the transmission electron-microscope. The first electron-micrograph of biological tissue was published by Marton in 1934. Albert Claude and George Palade were awarded the Nobel Prize (1974) in the field of Medicine for their accomplishments in cell biology employing electron-microscopy

Electron Microscope

An electron microscope is a type of microscope that uses a particle beamof electronstoilluminate a specimen and createa highly-magnified image. Electron microscopes have much greater resolving power than light microscopes that use electromagnetic radiation and can obtain much higher magnifications of up to 1 million times, while the best light microscopes are limited to magnifications of 1000 times. Both electron and light microscopes have resolution limitations, imposed by the wavelength of the radiation they use. The greater resolution and magnification of the electron microscope is because the de Broglie wavelength of an electron is much smallerthan that of a photon of visible light.

The electron microscope uses electrostatic and electromagnetic lenses in forming the image by controlling the electron beam to focus it at a specific plane relative to the specimen. This manner is similar to how a light microscope uses glass lenses to focus light on or through a specimen to form an image.

The Secchi disc is named after its Italian inventor Pietro Angelo Secchi. Transparency is a water-quality characteristic of lakes and reservoirs and can be measured quickly and easily using simple equipment. This characteristic varies with the combined effects of colour and turbidity. Some variation may also occur with light intensity and with the apparatus used.
Procedure
1. Morning (early) or afternoon (late) is suitable time to check transparency
2. Lower the Secchi disc and observed the depth at which it just disappears from view (L1)
3. Then further lift up slowly till it just reappears (L2).

I. Definitions

Transpiration - evaporation of water from a plant surface

Evapotranspiration - evaporation of water from a plant surface and the soil (and abiotic surroundings.

Take-home-lesson: Plants loose a lot of water by transpiration. See text for some specific examples.

Transpiration is the loss of water through areal parts of the plants particularly leaves in the form of water vapour and 95% of the transpiration is through stomata and the rest from cuticle and the lensi cells.

Transpiration can be measured in several ways. The most commonly used technique as the whole plant level is the gravimetric technique where in the amount of water loss through transpiration is measured of monitoring the amount of water added by measuring the loss in weight. Another method is the direct measurement using equipments specially designed for this purpose, which steadily include porometers. Transpiration is also being measured using the portable photosynthesis systems. In the laboratory transpiration rate can be measured using a very simple technique as follows,

Transplantation refers to the implantation of a cell, tissue or organ from one site to another site in an individual or from one individual to another. It involves implanting of organs or grafting of tissues to repair defects and to stimulate regeneration.

Transplantation refers to the implantation of a tissue or organ from one site  to another site in an individual or from one individual to another.It involves implanting of organs or grafting of tissues to repair defects and to stimulate regeneration. Auto-transplantation or autoplasty of the skin, cartilage, bone, muscle, tendon, nerve and fatty tissue is used in plastic and cosmetic surgery. The replacement of a diseased organ by a transplant of a healthy tissue is called transplantation.

A transplanting machine is a vital agricultural tool used to move seedlings from a nursery to a field, a process known as transplanting. These machines are specifically designed to plant seedlings or young plants at the desired depth, spacing, and arrangement in the soil, improving the efficiency and precision of transplanting. By replacing manual labor, transplanting machines save time, increase consistency, and ensure higher productivity. These machines are especially useful for crops such as rice, vegetables, and flowers, as they enable faster and more accurate planting compared to traditional methods.
VARIOUS TYPES OF TRANSPLANTING EQUIPMENT
Transplanters are versatile machines used for planting a wide range of crops, including:
• Tomatoes
• Cabbages
• Strawberries
• Tobacco
• Rice
• Vegetables like leeks, onions, and salads
These machines are designed to efficiently plant seedlings in rows at precise intervals, ensuring uniform growth. The construction of transplanting equipment varies depending on the type of crop being planted and the specific requirements of the field.

1. INTRODUCTION

The past hundred and fifty years of this millennium have witnessed an unbelievable pace of scientific and technological development. Modern science has attempted to a great extent and succeeded in realizing the dreams and fantasies of philosophers and scientists of the previous centuries. Plant genetic engineering via., nucleus is a mature technology that has been used productively for research and commercial applications. However, plants have an unassuming second genome inside the tiny organelles called as plastids. Although this small circular DNA carries a fewer genes than its nuclear counterpart, researchers say its potential for genetic engineering far outstrips its size. The ability to introduce foreign genes at specific locations on a chloroplast has been acquired very recently. It is expected that certain limitations of nuclear genome transformation methods in terms of protein expression and environmental safety can be overcome by site-specific introduction of genes into plastids. Thus the plastid engineering forms a viable alternative serving as another milestone in the field of plant biotechnology.

Introduction: Relation between transportation and meat quality
One of the fundamental aims of animal production system is to ensure better quality meat. Apart from various animal husbandry practices that affect the meat quality, the transportation of meat animals from farm to slaughterhouse and their handling at lairage, affect the meat quality greatly. For better meat quality, the pH of the meat should fall from normal pH 7.0 - 7.2 in live animal to pH 5.5 (ultimate pH) after slaughter at the onset of rigor-mortis. The low muscle pH is required to inhibit the microbial growth and meat tenderization (cathepsins system is activated at low pH). The ultimate muscle pH is achieved through the accumulation of lactic acid which is produced as a result of anaerobic glycolysis of glycogen. After slaughter, as the oxygen supply to muscle ceases, ATP is generated through anaerobic glycolysis of glycogen and in this process lactic acid is produced. ATP is required to keep the muscle in relaxed stage. This anaerobic glycolysis carries on till the glycogen reserve is exhausted. So, higher the glycogen reserve at the time of slaughter, longer the length of time duration of anaerobic glycolysis and higher the quantity of lactic acid production and greater the reduction of muscle pH. Hence, livestock should be transported and handled before slaughter carefully because stress during transit and in lairage could severely deplete the glycogen reserve of livestock.
The following facts should be especially taken care by the farmers raising livestocks for meat
1. Housing arrangement and design
• Any flaws/deficiencies in design, layout, cubicle size and its design, drainage, water bowls, slats, air circulation, etc. should be rectified

Livestock transportation is a process of carrying animal from one place to another by different means of transportation. It is a stressful, threating and not familiar event of domestic animals. Livestock is transported for many reasons like marketing, slaughter, changing of owner, re-stocking and desirable grazing area)Animals who are transported for slaughter are stressful due to various component like loading, unloading, restraining, unfavorable weather condition, thrist, hunger. During transportation there are many rules and regulation by different countries which should be strictly implemented) Cattle and other animal species should be transported with partition. Birds and lab animals are transported in cages or any airy cartridge or basket. During transportation food and water should be withheld for 24 hours. if the transportation is more than 24 hours animal should be watered and fed in transit.

Transportation and distribution of fruits and vegetables are important stages   of post-harvest loss. In India,  transportation of perishable commodities is in the most precarious stage. For local market, the produce is brought either by bullock cart or tractor trollies. The long distance transportation is mainly by rails and trucks, which is very costly. The basic reason for preference to road transportation is that it takes short transit period.

Key Points

• Traumatic injuries occur when an animal injures another or falls or strikes surrounding infrastructure (e.g., flooring, fence, gate).

• Common types of injuries include fractures, dislocations, bruises, and wounds, which might be penetrating or not.

Introduction

Physical injuries may occur throughout the export procedure. Slipping and being trampled or mounted during transportation or yarding are likely the most common causes of severe injuries. Poorly built or maintained facilities, such as yards, laneways, fences, gates, and flooring, can increase the risk of injury to animals while they are kept or handled. Poor stockmanship, such as rough handling and putting too much pressure on others, can also increase the chance of harm. Individual animals can be injured by improper restraint or handling, such as dragging an animal by its front or hind legs.

Traumatic reticulitis/ traumatic reticulo-peritonitis (TRP) commonly referred to as hardware disease is a significant condition in ruminants such as cattle, buffalo, sheep, and goats. It results from the ingestion of foreign objects like nails, wires, or pieces of metal, which settle in the reticulum (a compartment of the stomach) and cause injury or perforation of the reticular wall.
Traumatic reticulo-peritonitis (TRP) is a serious condition in ruminants. It occurs when a foreign object, such as a piece of metal, punctures the reticulum(the second compartment of the stomach), leading to inflammation of theperitoneum (the membrane lining the abdominal cavity). This can result in pain, infection, and in severe cases, systemic complications such as abscesses, pericarditis (inflammation of the sac surrounding the heart), or sepsis. Nutritional management is a key aspect in both the prevention and recovery from TRP, as it aids in reducing the risk of ingestion of foreign objects and
supports healing after the condition occur. mThe TRP occurs when ruminants, particularly cattle, buffaloes and sheep ingest sharp foreign objects such as nails, wires, or pieces of metal. Since ruminants
do not chew their food thoroughly during the initial stages of eating, these objects can easily pass into the rumen and then the reticulum. The reticulum’s honeycomb structure makes it susceptible to the penetration of sharp objects. Once a foreign object punctures the reticulum wall, it can cause localized infection (reticulitis) or more widespread inflammation (reticulo-peritonitis), potentially leading to more severe systemic issues such as liver abscesses, pericarditis, and septicemia

Surgical removal is the routine treatment method for mammary tumors, however, there is no consensus on the optimal procedure. There are supporting factors for every surgical procedure conducted for mammary tumors including lumpectomy (removal of tumor only), mastectomy (affected gland removal only), radical mastectomy (complete mammary gland and associated lymphatic tissue removal) and modified radical mastectomy (removal of complete mammary gland, lymph nodes and associated chest muscles).The more extensive procedures do not increase survival in dogs when compared to the other procedures, and the benefits of the simpler procedures are clear. Further, the radical mastectomy increases the disease-free interval but not the survival duration in cats.

Certain casualties which are encountered in clinical practice are viz. acute peritonitis, anaphylactic shock, respiratory distress, cardiac arrest, ingestion of foreign bodies, hypomagnesemic tetany, diabetic ketoacidosis, toxic mastitis and poisoning. These patients required critical care, the critical patients are those patients whose conditions are capable of changing on a minute to minute or hourly basis or patients who could rapidly deteriorate in short notice. Proper treatment of emergency disease can help in the diagnosis of specific poisoning or disease on the basis of treatment response.