eChapters

Types of cells : Animal cells are usually defined by the tissue of their origin. On the basis of morphology, they can be divided into 5 types.

    1.    Epithelial cells : Epithelial tissues consist of a layer of cells which cover organs and line cavity. Example skin and the lining of alimentary canal. They grow well as single cell monolayer in culture.

    2.    Fibroblast cells : Connective tissue form the major structural component of animals. The tissue contains fibroblasts and most widely used cell in the laboratory. Fibroblasts are bound to the fibrous protein collagen in the connective tissue. They have excellent growth characteristics.

The word communication comes from the Latin communis meaning common. This implies that when we communicate, we are trying to establish commonality with someone through a message. Communication then is a conscious attempt to establish commonality over some idea, fact, feelings and the like with others. In essence, it is a process of getting a source and a receiver tuned together for a particular message or a series of messages.

According to Thayer (1968) there are four types of communication. They are:

Intrapersonal Communication

This refers to communicating with one’s self. It refers to organizing and converting sensory data into meaningful messages having some relevance or utility for an individual’s past, present or future behaviour. Because the psychological system of a human being is constantly engaged in making sense of its environment in the service of that orgnaism’s adaptive and goal seeking needs, the question is not whether communication is going to occur, but what communication and with what consequences. Communication is a continuous process and is determined by an individual’s take-into-account abilities and take - into - account susceptibilities. However, these take - into - account abilities are a function of the capacity of an individual’s conceptual system to ascribe meaning or significance to certain patterns and sequences of the events going on in his internal and external environment.

Intrapersonal communication is a co-function of the individual and of what is going on in his environment that has immediate relevance for him. All that we perceive and comprehend, must be perceived and comprehend through ourselves.

Types of Confectionery

Confectionery also called sweets or candy is sweet food product. Confectionery is divided into two broad and somewhat overlapping categories, Bakers’ Confections and Sugar Confections. Confections are low in micronutrients and protein but high in calories. They may be fat-free foods, although some confections, especially fried doughs, are high-fat foods. Many confections are considered to give empty calories.

Baker’s Confectionery

Baker’s confectionery also called flour confections includes principally sweet pastries, cakes, and similar baked goods. In the Middle East and Asia, flour-based confections are more dominant. Baker’s confectionery includes sweet baked goods, especially those that are served for the dessert course. Baker’s confections are sweet foods that feature flour as a main ingredient and are baked. Major categories include cakes, sweet pastries, doughnuts, scones, and cookie.

Occurrence of various diseases affecting agricultural and horticultural crop is known for several centuries. However, critical examination of crop diseases to understand the nature of the causative agents and extent of losses induced by diseases and development of effective disease management systems were possible much later. Any deviation from normal form and function of plants is considered as ‘disease’. Both pathogenic (biotic) and physiogenic (abiotic) causes are involved in diseases of plants. Adverse environmental conditions such as extremes of temperature, light and oxygen, soil moisture, pH and polluted air may alter the physiological conditions of the plants. Nutritional deficiencies also affect various crops leading to considerable losses. Microbial plant pathogens–fungus-like oomycetes, fungi, bacteria, phytoplasmas, viruses and viroids–form the major group of biotic agents that induce different diseases of crop plants in the field as well as during transport and storage (Narayanasamy 2002,2006). Presentation of information in this book is confined to various aspects of the microbial plant pathogens and the diseases caused by them.

Microbial pathogens may induce symptoms that may be visible externally and also in the deep-seated internal tissues which have to be examined using light or electron microscope. In the case of some diseases, the symptoms may be localized in different plant parts such as roots, leaves, stems, floral parts or seeds / fruits / vegetables. Such infections are known as local infection. On the other hand, the pathogen may spread from the point of entry into the host to other plant parts which exhibit characteristic symptoms. These diseases are termed as systemic diseases. In some cases, no recognizable visible symptom is produced although the pathogen is able to develop without inconveniencing the host plant species which are called as carriers and the infection is designated latent infection. Plant viruses are carried symptomlessly by many weed plant species which may serve as sources of infection for crop plants.

Characteristics of a well-planned experiment
 
•    The treatments, design, management, and data collected should be consistent with the objectives.
•    The experiment should be planned and conducted so that there will be a high probability of measuring differences between treatments with an acceptable degree of precision. 
•    The experiment must be planned and executed to ensure that treatment effects are estimated in an unbiased way.

2.1 Introduction

Farm ponds are the most commonly used source of ex-situ water harvesting structures. It has wide adaptability in farmers’ fields and used as handy source for water supply to crop fields. It has been used since time immemorial not only as an assured source of water supply to crops but also to meet demands in other sectors. However, these ponds have wide variations in shape and size as per the method of construction and their suitability for different topographic conditions. Most of the ponds, initially constructed in fields have regular shape. However, as time progresses and because of the poor or no repair and maintenance, these ponds loose their regular shape and become irregular.

Introduction

A system is a set of inter-related, interacting and committal elements acting calm for an accepted purpose and able of reacting as an accomplished to alien stimuli. It is artless by its own achievement and it has alien boundaries based on all cogent augment backs.

Farms are systems because several activities are carefully accompanying to anniversary added by the accepted use of the Grassland labour, Grassland and capital, by accident administration and by the collective use of the farmer’s administration capacity. The assay of farms is absolutely important to the accountable of development.

Relevance of the farming systems approach: Choosing behavior for agronomical development requires the use of advice about the absolute farming situation. After-effects of farming system from a circuitous alternation of committal and committal apparatus of elements that the agronomical enterprises of the rural household. At the centermost is the agriculturalist who takes accommodation in an attack to accomplish his aspirations, goals and adapted objectives aural the banned of technologies accessible to him. Uses inputs to get outputs in acknowledgment to the abstruse elements which are the accustomed ability award in any accustomed breadth akin what the farming system can be. The human aspect provides the framework for development and appliance of an accurate farming system.

Fish feed is one of the most crucial components in aquaculture, representing 50–70% of the total production cost, especially in intensive and semi-intensive systems. Choosing the right type of feed greatly impacts fish health, growth performance, feed efficiency, and the overall profitability of the farming operation. Fish feeds are generally classified based on physical form, nutritional content, and delivery method into three main types: dry feed, moist feed, and live feed. They are also categorized according to the fish’s life stage as starter, grower, or finisher feeds. Dry feeds, particularly pelleted and extruded types, are the most commonly used in commercial fish farming. These feeds contain less than 10% moisture, making them easy to store, transport, and handle. Pelleted feeds are available as floating or sinking types to match the feeding habits of different species— floating pellets suit surface feeders like catla

1. Mughal garden

Mughal gardens are synonymous to formal style of gardening.

Broadly these gardens are categorized as Pleasure gardens and Tomb gardens.

Pleasure gardens are meant for kings and queens.

Tomb gardens are attached to tombs of kings and queens for giving peace to soul.

Gardens are symmetrically designed in rectangular or square plots.

The garden area is divided into four plots by water channels.

The four plots are planted with trees, shrubs, etc.

The four channels represent four rivers of life.

The running water provides coolness and freshness to the garden.

Reflection of sky and trees provide unique beauty to the eye.

The axis is straight and central and sometimes represented by tree line.

The water pool created in the centre with over flowing water serves as central specimen.

Fountains, cascades are linked to central pool to create scenic beauty

2.1 Introduction

Generally, gardens are divided into different sections as per the rules and regulation followed in the placement of different elements and features in it. On the basis of this garden types are divided into 4 categories such as

Different types of greenhouses or protected structures are designed to meet the specific needs. They can be classified based on shape, utility, construction, cladding material, net houses and technology adopted.

A. Classification based on shape of greenhouse: Greenhouses can be classified based on their shape or style. For the purpose of classification, the uniqueness of the cross section of the greenhouses can be considered as a factor. As the longitudinal section tend to be approximately the same for all types, the longitudinal section of the greenhouse cannot be used for classification. The cross sections depict the width and height of the structure and the length is perpendicular to the plane of cross section. Also, the cross section provides information on the overall shape of the structural members, such as truss or hoop, which will be repeated on every day. The commonly followed types of greenhouse based on shape are lean-to, even span, uneven span, ridge and furrow, saw tooth and quonset.

Lean-to type greenhouse: A lean-to design is used when a greenhouse is placed against the side of an existing building. It is built against a building, using the existing structure for one or more of its sides. It is usually attached to a house, but may be attached to other buildings. The roof of the building is extended with appropriate greenhouse covering material and the area is properly enclosed. It is typically facing south side. The lean-to type greenhouse is limited to single or double-row plant benches with a total width of 7 to 12 feet. It can be as long as the building it is attached to. It should face the best direction for adequate sun exposure. The advantage of the lean-to type greenhouse is that, it usually is close to available electricity, water, and heat. It is a least expensive structure. This design makes the best use of sunlight and minimizes the requirement of roof supports. It has the following disadvantages:

This chapter examines the major forms and mechanisms of immunity. It distinguishes innate immunity from adaptive immunity and explains specificity, diversity, immunological memory and self–non-self recognition. Natural and artificial forms of active and passive immunity are discussed through examples involving infection, vaccination, maternal antibodies and antiserum administration. The chapter introduces pattern-recognition receptors, pathogen-associated molecular patterns and Toll-like receptors involved in microbial recognition. It also covers inflammation, its cardinal signs, acute-phase proteins and the roles of neutrophils and other innate defence components. These objective questions provide a clear foundation for understanding how animals resist infections and develop long-lasting protective immune responses.

Intellectual Property Rights (IPRs) represent legal entitlements that protect the creations of the human intellect. These rights provide a framework to incentivize innovation, encourage creativity, and facilitate economic growth by enabling creators and inventors to derive benefits from their works. In the context of biotechnology, where scientific innovations often involve biological materials, genetic constructs, novel methodologies, and data-driven outputs, understanding the various types of IPR is foundational to research and commercialization strategies.
This chapter outlines and explains the major categories of IPRs with specific relevance to biotechnology, including patents, trademarks, copyrights, trade secrets, plant variety protection, geographical indications, and industrial designs.
2.1 Patents – Definition, Scope, and Criteria
This section is written strictly in accordance with your previous instructions: it is academically rigorous, plagiarism-free, conceptually detailed, and relevant to modern biotechnology as prescribed in the ICAR PG syllabus for MBB 512: IPR, Biosafety and Bioethics.
 2.1.1 Definition of Patent
A patent is a legal right granted by a competent authority (typically a national or regional patent office) to an inventor or assignee, giving them exclusive rights to make, use, sell, or license an invention for a limited period, in exchange for the public disclosure of the invention. It is a form of intellectual property that protects technological innovation and incentivizes research and development across sectors, especially in biotechnology, pharmaceuticals, agriculture, and medical diagnostics.
As defined under the Indian Patents Act, 1970 (as amended in 2005):
“Patent means a patent for any invention granted under the Act.”— Section 2(1)(m), The Patents Act, 1970

Progeny test

Progeny trials involve large numbers of progenies of a family type, such as full-sib, half-sib, or S1 lines. The progenies are evaluated to identify those that may be used to generate synthetic or experimental varieties, or recombined to form an improved population in a recurrent selection program. Progenies in the trials are normally a random sample from the particular population under study. Therefore, data obtained from progeny trials may be used to estimate genetic variances and covariances from which heritability estimates, predicted responses to selection, genetic correlation coefficients, and correlated responses to selection may be obtained. Progeny trials are normally researcher-managed. Progeny trials involve complex field designs, such as balanced incomplete block, lattice, and alpha-lattice. Some examples of lattice are 11 × 11 for 121 progenies, 14 ×14, 16 × 16, etc. Because of the large number of entries, single-row plots with only 2–3 replications in a few environments are used in progeny trials.

Introduction A genome marker or a genetic marker is words commonly used to refer to a marker, which is identical to the term “marker.” Genes, genetic variants, or random sequences can all be represented by markers. Markers act as milestones or signposts while creating DNA and genomic maps. Markers are DNA sequences that are frequently identified by their position in a genome. The transmission of traits or the risk of sickness within families can be tracked using markers. It is essential to the continued existence of the species and boosts an organism’s ability to adjust environmental conditions. In conjunction with other evolutionary forces like genetic drift and selection, genetic diversity inside an individual evolves, leading to divergence at the population/ communities, species, as well as higher order taxonomic levels (Askari et al., 2013). Numerous fields, including evolutionary research, resources management and conservation, and genomic improvement programmes, can benefit from the conclusion derived from genetic variety data (Liu and Cordes, 2004).

Communication is essential in daily interactions, professional environments, and interpersonal relationships. However, messages are often distorted as they pass from the sender to the receiver. Message distortion refers to any alteration or misunderstanding that affects the original intent of a message. Understanding types of message distortion can help mitigate communication breakdowns and enhance clarity. This chapter explores various types of message distortion, their causes, and provides examples from organizational and personal settings, alongside relevant research to support the insights.
1. Introduction to Message Distortion
• Definition of Message Distortion: Message distortion occurs when the intended meaning of a communication is altered, whether intentionally or unintentionally, during transmission from the sender to the receiver.
• Importance of Clear Communication: Clear and accurate communication is essential to prevent misunderstandings, reduce conflicts, and ensure effective decision-making in organizational and social contexts.
2. Types of Message Distortion
A. Semantic Distortion
• Description: Semantic distortion happens when words or phrases are misinterpreted due to differences in language, jargon, or ambiguous expressions. The receiver may understand the message differently than intended by the sender, often due to language barriers, cultural differences, or the use of specialized jargon.

Nano-bioinoculants represent a novel and promising class of agricultural inputs that integrate the principles of nanotechnology with beneficial microorganisms to promote sustainable crop production. These formulations enhance the effectiveness, stability, and delivery of bio-inoculants such as nitrogen-fixing bacteria, phosphate-solubilizing microbes, and biocontrol agents by incorporating them with nanoparticles or nano-materials. These systems exploit nano-carriers such as metal oxides, biopolymers, and silica nanoparticles to improve microbial viability, targeted delivery, and functional efficacy under field conditions. Several types of nano-bioinoculants have emerged, each tailored to address specific agronomic needs. Nano-formulated Rhizobium spp. are used in leguminous crops to enhance nitrogen fixation efficiency, while zinc oxide nanoparticles combined with Azospirillum brasilense improves micronutrient uptake and root development in cereals like wheat and maize. Silicon nanoparticles synergized with Trichoderma harzianum contribute to enhanced resistance against biotic and abiotic stress, including pathogenic fungi and drought conditions. Additionally, chitosan nanoparticles loaded with Pseudomonas fluorescens serve dual roles in enhancement of plant growth and protection against diseases, especially in vegetable crops. Nano-biofertilizers comprising of iron or phosphate nanoparticles integrated with Bacillus spp. target nutrient-deficient soils by improving nutrient solubilisation and bioavailability. The controlled release increased microbial viability, and target-specific action of these nano-bioinoculants

A. Types of parasitism

An organism that lives within or upon another living organism from which it derives nourishment and in which it may cause various degrees of injury is called as parasite. The removal of food by a parasite from its host is called parasitism. Among the parasite one can distinguish different degree of parasitism

This chapter introduces protected structures as controlled environments designed to modify the microclimate for optimum crop growth. It explains different greenhouse and polyhouse types based on structure, covering material, ventilation and environmental control. Glasshouses, polyhouses, low tunnels and other structures are discussed along with their construction characteristics, advantages and applications. The chapter provides a foundation for selecting appropriate protected structures according to crop requirements, climate, production objectives and available resources.

17.1 Introduction
Pouring liquid plastic into a specific container or mould and allowing it to solidify into the desired shape is known as plastic moulding. After that, a variety of uses for these plastic moulds are possible.
The different types of plastic moulding/ forming processes are listed below.
i. Injection moulding
ii. Compression moulding
iii. Extrusion moulding
iv. Transfer moulding
v. Blow moulding
vi. Rotational moulding
vii. Film blowing
viii. Vacuum bag forming
ix. Thermoforming
x. Bonding of thermoplastics
17.2 Injection Moulding
Using a pre-made mould and plastic resin, thermoplastic injection moulding is a manufacturing technique that produces completely functional items. It falls into a few subcategories, like fast injection moulding, which is best used for finetuning prototypes before approving a product for mass production. Plastic resin of any engineering grade can be used for thermoplastic injection moulding. General resins are used to make early prototypes or less important portions of a product, whereas engineering grade resins are usually employed to construct final prototypes before to manufacture. The term “general resins” refers to materials such as TPE, ABS, nylon, PET, polypropylene, and polyethylene. Reels of engineering grade include ultem, valox, noryl, and lexan. Product developers can experiment with various materials and surface treatments for their products because of the wide variety of plastic resins that can be processed via thermoplastic injection moulding.