eChapters

Introduction

Normally, water is a liquid substance made of molecules containing one atom of oxygen and two atoms of hydrogen (H₂O). Pure water has no colour, no taste, no smell, turns to a solid at 0°C and a vapour at 100°C. Its density is 1 gram per cubic centimetre (1 g/cm₃), and it is an extremely good solvent.

An extraordinary property of water is its ability to dissolve other substances. There is hardly a substance known which has not been identified in solution in the earth's waters. Were it not for the solvent property of water, life could not exist because water transfers nutrients vital to life in animals and plants.

A drop of rain water falling through the air dissolves atmospheric gases. When rain reaches the earth, it affects the quality of the land, lakes and rivers.

• General considerations

 • Cyanide poisoning

 • Nitrate poisoning

 • Nitrite poisoning

 • Oxalate poisoning

 • Strychnine poisoning

 • Arsenic poisoning

 • Lead poisoning

 • Thalium poisoning

 • Ergot poisoning

 • Carbon monoxide poisoning

 • Phenothiazine poisoning

 • Pesticide poisoning

Filling converts freshly frozen ice cream into commercially marketable product formats while maintaining accurate portioning, appearance, hygiene, and structural quality. This chapter examines the major filling and forming systems used in industrial ice cream production. It covers cup, cone, moulded stick, extruded novelty, tub, and family-pack filling lines. The chapter explains equipment functions, filling principles, product handling, and operational considerations for different formats. Common filling defects and corrective measures are also discussed. Standard operating procedures for start-up, operation, and shutdown provide practical guidance for plant personnel. Effective filling operations are essential for achieving consistent weight, attractive presentation, packaging integrity, productivity, and efficient manufacturing performance.

Landform, water and plants form the three basic elements of garden designing. Each of these basic element is described and discussed in detail.

I Landform

“Landform” refers to three-dimensional relief of earth’s surface. Thus, in simple words it is the lay of land, synonymous with, “topography”. Land is defined as the surface of the earth and all its natural resources. Landform is thus 3-D view of earth’s surface including all the visible feature of an area of land and landscape refers to the picture representing a view of natural inland scenery. Landform is the common module in exterior environments, a base, an axis, a thread, which ties all the physical elements, space together along the horizon or the water edge. Landforms can be classified as macro-landforms, micro-landforms and mini-landforms. Macro-landforms refers to valleys, mountains, rolling hills, prairies, desert, seashore and plains. Micro-landforms refers to mounds, slopes, level areas or elevation changes using steps and ramps. Mini-landforms refers to subtle, undulations or ripples of a sand dunes or the textural variation of stones and rocks.

Different techniques are used for explaining and representing the type of landform. These include (i) Contour lines, (ii) Models, (iii) Ratio method, (iv) Value and colour, (v) Spot elevation, (vi) Computer graphics, (vi) Hatches (disconnected lines are used) and (viii) Percentage method. These techniques are used for proper study of the landform, to identify loopholes and need to modification in order to establish proper drainage or to modify the site in order to accommodate of various elements or to create an aesthetically pleasing ground plan.

Introduction

Functional genomics is a field of molecular biology that attempts to make use of the vast wealth of data produced by genomic projects (such as genome sequencing projects) to describe gene (and protein) functions and interactions. Unlike genomics and proteomics, functional genomics focuses on the dynamic aspects such as gene transcription, translation, and protein-protein interactions, as opposed to the static aspects of the genomic information such as DNA sequence or structures. Functional genomics includes function-related aspects of the genome itself such as mutation and polymorphism (such as SNP) analysis, as well as measurement of molecular activities. The latter comprise a number of “-omics” such as transcriptomics (gene expression), proteomics (protein expression), phosphoproteomics and metabolomics. Together these measurement modalities quantifies the various biological processes and powers the understanding of gene and protein functions and interactions. Functional genomics uses mostly high-throughput techniques to characterize the abundance gene products such as mRNA and proteins.

The range of isotope applications in surface water hydrology is not as wide as in groundwater hydrology as the surface waters are more easily amenable to conventional hydrological methods. Following are the areas in which isotopes have a significant role in either improving the accuracy of measurements or in providing additional information, which is otherwise not easily available.

Alternative agriculture is a production system that follows the concept of agroecology and does not use conventional methods. Natural farming, Bio-dynamic farming, Organic farming, Permaculture, Homa farming and many others are considered as alternative agriculture. In spite of some differences, these practices aim at preserving the environment and minimise the use or avoid synthetic agrochemicals. They rely on natural cycles, by using crop rotations, cover crops or no-tillage, etc.

1.    Introduction    129
2.    Soil Microbiology    129

    2.1.    Bacteria, 130
    2.2.    Fungi, 132
    2.3.    Algae and Cyanobacteria, 132
    2.4.    Protozoa, 132
    2.5.    Viruses, 135

3.    Water Microbiology    133
4.    Microbial Associations    133

    4.1.    Neutral interactions, 133
    4.2.    Positive interactions, 133
    4.3.    Negative interactions, 133

SUMMARY

Citrus is third most important fruit crop in India after banana and mango. Citrus crops have occupied an area of 8.43 lakh ha with total production of 75.7 lakh tons and the productivity of 9.9 tons/ha in India. Such a quantum of citrus production contributes 13 per cent of total fruit production demonstrating the significance of citrus in horticultural research and development in India. Rootstocks are known to have profound effect on the vigour, precocity, productivity, internal quality, and longevity of the scion varieties grafted on them. They are also known to influence the susceptibility of trees to various diseases and insects. Furthermore, it is recognized that optimum performances depends on the proper selection of rootstocks for a given set of growing conditions. The most commonly and widely used citrus rootstocks in India are Rough lemon, Cleopatra and Pectinifera. Rough lemon (Jatti Khatti) is the most important and widely used rootstock in the country for most of the scions followed by Kharna Khatta being more popular in Uttar Pradesh. While the problem of rootstock selection is important in all major fruit crops, it is of even greater importance in citrus due to tristeza virus disease now present in many areas of the world. It is also possible that citrus decline in India may be due partly to stionic incompatibilities. This chapter deals with problems and prospects of rootstocks in citrus in India, particularly related to horticultural aspects, insect-pests, diseases, nematodes, physiological disorders, post harvest quality, aspects related to tissue culture and rootstock breeding.

The chemicals, which can destroy pests or prevent their occurrence by their chemical action, are known as ‘pesticides’. Pesticides include ‘insecticides’, ‘acaricides’, ‘nematicides’, ‘rodenticides’, ‘molluscicides’ etc., which are used to destroy insect pests, mites, nematodes, rodents, slugs and snails respectively.

Pesticides have been used even before the time when man never knew how to read or write. Even before 200 BC, several substances were known to control pests. Sulfur, arsenic poisons, fluorine poisons, as well as some plant extracts and oils were used to control pests. However, these substances could destroy only a few specific pests.

Advances in the invention of pesticides

The invention of many of the present day pesticides started only after 1867. Paris green, a synthetic chemical was the first pesticide used to control the Colorado beetles of potato.  Up to  1939,  only  a few inorganic  chemical compounds and plant poisons were used as pesticides. Only after the Second World War much advances were made in chemical research. After the invention of DDT in 1939, a revolution had started in the field of pest control.  Following the introduction of DDT,  several other pesticides were identified and introduced for pest control. In 1941, BHC was invented by the British and French scientists. During the same period, organophosphorus pesticides were invented by the German scientists and parathion, malathion, demeton etc. were introduced.

Channel improvement increases or restores the ability of a river or drainage channel to convey floodwater safely. Natural or artificial channels may lose capacity because of sediment deposition, vegetation, debris, bank encroachment, irregular alignment, insufficient cross-sectional area, or excessive hydraulic resistance. Improvement can involve widening, deepening, straightening, clearing, lining, dredging, bank stabilization, or constructing additional waterways. This chapter discusses the purposes, advantages, disadvantages, and planning principles of channel improvement. It examines channel geometry, flow resistance, permissible velocity, sediment behaviour, erosion protection, and maintenance. The chapter also emphasizes that interventions must be evaluated carefully because poorly planned modifications can accelerate flow, destabilize banks, damage habitats, or shift flooding downstream.

1. _________________ work for grape fruit setting.

   a) Alar

   b) IAA

   c) Cytokinin

   d) Abscissic acid

2. A fruits that develops from a hollow pear-shaped fleshy receptacle (hypanthodium) which encloses a number of minute male and female flowers in known as :

   a) Aggregate fruit

   b) Hesperidium

   c) Pome fruit

   d) Syconus fruit

Meat and meat products industry is a sunrise industry in India having huge potential for upliftment of agricultural economy. India is the second largest food producer in world but the contribution of meat industry is still confined to localized handlers. So to uplift industry basic infrastructure, food chains, food security and safety along with standards and laws formulation and their implementations is today’s need. Standards are carefully drawn specifications with respect to a food product. These standards are mainly of three types i.e. government, trade and research standards. Government standards are formulated by the government of India or state government and also have the power to implement these standards while trade standards are implied by the individual company. Research standards are formulated on the basis of comparative study of the products by the researchers. Laws are the legislations enforced by the organisations either government or by autonomous bodies made under the constitutional acts of the country. At present numerous standards and laws are in existence in individual country or at international level. The need is to harmonize them as per the industry and trade requirement.

Domestic Organizations Involved in Standards and Laws Formulation

For the formulation, enforcement and control of standards and legislations at domestic level various organizations are of prime value. Some of these are:

1.0 INTRODUCTION

Black pepper popularly known as ‘King of spices’ or ‘Black gold’ is one of the important and earliest known spices produced and exported from India. Its original home is the dense evergreen forests of Western Ghats in south India. The flavour and fragrance of this oriental spice had a magic spell in human civilization and culture since very ancient days. Expeditions in search of pepper led to the discovery of new trade routes.

Introduction

There are a number of chemicals in the environment, some natural other man-made, some toxic other non-toxic. These are toxic chemicals, whether natural or man-made, which has created problems for the environment and biota on the earth. Of these toxic chemicals, heavy metals are extremely hazardous. Metals are present naturally in the earth’s crust at various levels. However, increasingly widespread heavy metal pollution resulting from anthropogenic activities has caused serious environmental problems and is posing threat to both wild life and human population (Nriagu and Pacyna, 1988). Natural sources include weathering of mineral and metal ions from rocks, displacement of certain contaminants from groundwater or subsurface layers of soil, atmospheric deposition from volcanic activity, and transport of dust. The anthropogenic sources include deposition of industrial effluents, application of sewage sludge, deposition of air-borne industrial wastes, military operations, mining, landfill operations, use of agricultural chemicals, gas exhausts and energy and fuel production (McIntyre, 2003).

1.0 INTRODUCTION

Capsicum or chilli including paprika belonging to family Solanaceae, is a native of new world tropics and sub tropics. Within the genus Capsicum, mainly five species have been recognized as domesticated namely, Capsicum annuum, C. baccatum, C. chinense, C. frutescens and C. pubescens. Most of the commercially cultivated chilli cultivars as well as paprika belong to the species C. annuum. The cultivated Capsicum was introduced to India and Southeastern Asia in the 17th century by the Portugese. The name Capsicum is possibly derived from the Greek word ‘Kapso’ meaning ‘to bite’ referring to the dominant pungency stimulated by the spice, while ‘Paprika’ means plants of the genus Capsicum, in the Hungarian language. ‘Paprika’, is defined in the world market as non-pungent (sweet) brilliant red ground Capsicum powder, derived from the thick flesh dried red pods, with most of the seeds and veins removed. Both chilli and paprika are widely consumed as vegetable and spice all over the world. Mostly, the cultivars grown in Asian countries are pungent, while less and non-pungent cultivars are more common in European countries. Chilli of commerce is the dried pod, while it was pericarp (outer skin of the dried fruit) for paprika.

Introduction

India is the world’s second largest producer of rice, wheat and other cereals. The important cereals are-wheat, paddy, sorghum (Bajra), barley and maize etc. India is not only the largest producer of cereal as well as the largest exporter of cereal products in the world.

Foodgrain production (2019-20): 296 million tonnes

Scenario

Table: States producing maximum area and production of crops in India

The term ‘Management’ derived from word ‘manage’ derived from French

word menage means ‘housekeeping’.

According to Knootz and Weihrich 1988, ‘Management as the process of

designing and maintaining an environment in which individuals, working

together in groups, efficiently accomplish selected aims’.

According to Louis E.Boone and David L.Kurtz ‘management as the use of

people and other resources to accomplish objectives’.

POSDCORB is an acronym widely used in the field of Management and

Public Administration., it first appeared in a 1937 staff paper by Luther Gulick

and Lyndall Urwick. The acronym stands for steps in the administrative

process: Planning, Organizing, Staffing, Directing, Coordinating, Reporting

and Budgeting.

13.1 Introduction

In agricultural lands, when the pores of the soil within the root zone of the crop get saturated with the subsoil water due to infiltration of high rainfall, excess irrigation or heavy seepage loss in the unlined canal systems, the air circulation within the soil pores get totally stopped. This phenomenon is called as waterlogging. In canal commands where there is continuous flow of water in the canals and canals are mostly unlined, there is heavy loss of seepage which raises the ground water table. This raising water table sometimes comes up to the ground surface which impedes surface drainage. By capillary action, under ground water rises to the crop root zone and submerges the roots of the crops for most of the time. This situation is called as waterlogging which creates salinisation and alkalinisation problems affecting the plant growth.

The height to which soil water rises above the water table by capillary action is called as capillary fringe. Generally, the height of the capillary fringe varies from 1 to 1.5 m. When the water table comes to 1.5 m below the surface of the soil, the land is said to be waterlogged. At times, due to poor drainage conditions, surface water cannot be freely drained out. The stagnate water in these low lying areas also causes waterlogging which enhances the weed growth consequently affecting the crop yield.

14.1 Introduction

Groundwater is an important source of water for irrigation. It is the most abundant fresh water resource of the earth. Underground water reservoirs contain large stock of fresh water resources. Total quantity of groundwater within 800 m distance below the ground surface is more than 30 times the total water in all fresh water lakes, more than 60 times the total water in soil and other unsaturated rock materials, more than 300 times the water vapour in the atmosphere and 3000 times the average volume of all rivers and rivulets in the world (Lenka, 2001). But the distribution of groundwater is not uniform. At some places, it lies below a few metres whereas at other places, it is a thousand metres or more below the ground surface. In some places, there is abundant groundwater potential whereas at other places there is meager potential.

Groundwater is the water reaching the groundwater reservoir from the infiltrated water of precipitation which constitutes an important component of the hydrologic cycle. It is only the part of the subterranean water that occurs in the saturated pores of the containing rock materials underlain by water held in a zone of aeration. It should not be confused that all the water present in soil below the ground surface is groundwater.