eChapters

Q.1 In applying varying probability sampling for information of population total of X, it is required to know the values of selection probabilities Pi (i = 1, 2, 3,..., N).

Q.2 The technique of “Double Sampling” was first time formulated by Jayman, (1938) in connection of collecting information on strata sizes in stratified random sampling scheme.

Soil and growing media provide the physical, chemical, and biological foundation for successful horticultural production. This chapter explains soil properties, soil fertility, soil health, growing media, nutrient availability, and principles of plant nutrition. Emphasis is placed on soil testing, pH, electrical conductivity, organic matter, nutrient balance, and crop-specific fertilizer management. The chapter also introduces soilless media used in nurseries and protected cultivation. Understanding root-zone conditions is essential because horticultural crops are highly sensitive to water, aeration, salinity, and nutrient imbalance. Sustainable approaches such as composting, mulching, biofertilizers, and integrated nutrient management are discussed to maintain productivity while improving soil health and resource-use efficiency.

5.1 Introduction

Energy in the form of heat is one of the main energy requirements in domestic, agricultural, industrial and commercial sector of our economy. From an enduse point of view, solar thermal energy finds its application in these areas. Solar thermal energy devices convert radiant energy of the sun into thermal energy for different productive works. In fact, solar energy consists of infrared radiation, it is characteristics of infrared radiation that whenever it falls on any object, it converts into thermal heat energy.

The conversion of sun light into thermal energy is easily or conveniently achieved by means of a metallic or plastic cover, painted black with ordinary black board paint or having selected coating over it and covered with one- or double-glazing cover for transmitting solar radiation inside it. This metallic cover is known as absorber, below it either channels or pipes or passages for allowing entry of water or air are provided, through which heat energy is transferred to working medium either air or water. The absorber plate is covered with suitable thickness of insulating material on its back or sides for preventing loss of heat from the absorber plate. This complete system is enclosed in an airtight box. When exposed to solar radiations, the blackened metallic surface absorbs solar energy and converts into heat. This heat could be used for cooking of food, heating of water and air, evaporation of moisture form the grains etc. In fact, absorber works on the principle of black body, which absorbs maximum and a good absorber, is a good emitter. Hence generated heat could be utilized for different applications.

Oilseed Brassicas also referred to as rapeseed-mustard, an important group of oilseed crops in the world, comprise eight cultivated crops of tribe Brassiceae within the family Cruciferae (Brassicaceae). The word ‘rape’ and ‘mustard’ have been derived from the word rapum meaning turnip and European practice of mixing the sweet ‘must’ of old wine with crushed seeds of black mustard [Brassica nigra (L.) Koch] to form a hot paste (Hemingway, 1976).

1. GEOLOGY

Geology : Earth Science

 Geo = Earth + Logos = Science

 Def : The science which investigates the history of the earth is known as geology.

 Following are the important branches of geology.

1.Coal Geology : it is related with natural gas, coal deposits and their formation.

2.Crystallography : includes the crystal and atomic structure of the mineral. 3. Drilling Technology : it is related with the cores, core logging and coorelation of the lithology.

4.Engineering Geology and Surveying : it is related with engineering aspects of the earth.

27. STRIKE AND DIP

Outcrop : A part of the rock formation which crops out or exposed on the surface of the earth is called an outcrop.

The total area over which a particular rock unit occurs at the surface whether visibly exposed or not. The term outcrop is especially used for delination of such an area on a geological map.

Attitude : To study these outcrops their attitude help in better understanding the position of the bed on the ground surface or in field is attitude of a bed can be described with the help of two basic structural elements i.e. strike and dip.

8.1. INTRODUCTION

The existence of Science could be in danger, if scientists did not record experiment performed, data collected and resuit obtained. Scientific writing doesn't mean to only keep records of progress and information, but to actually publish the results of studies in scientific journals. While keeping records is quite easy to do, publishing scientific papers can be really difficult, and especially for young researchers who are just starting to discover the world of scientific publications. A scientific writing is a method of communication, an attempt to tell others about some specific data that you have gathered and what you think those data mean in the context of your research. The rules of writing a scientific paper are rigid and are différent Uorr\ those that apply when we write an English theme. Scientific paper must be written clearly and concisely so that readers with backgrounds similar to yours can understand easily what you have done and how you have done it. The ultimate aim of most scientists is to publish their research findings in professional scientific reports. This includes peer-reviewed journal articles, which report original findings and contribute to the global pool of scientific knowledge. Scientists spend their time writing proposais, planning research, undertaking experiments, analysing data, tracing research, and reading related articles. Published reports and journal articles provide evidence of this dedication. Therefore, a scientific report is not simply some extra work that is done at the end of a project; it is an important historical document that provides evidence of work to the wider scientific community.

1. INTRODUCTION

Motifs are patterns in biological sequences which can indicate the presence of certain biological characteristics and function. In general, these could represent patterns in any kind of biological sequences such as DNA sequences, RNA sequences and protein sequences. Evolutionary conserved regions (ECRs) are sequences with atleast 100 bp length alongwith minimum 70% identity, which includes most of the protein-coding exons, promoters, enhancers and repressors. ECRs are the preliminary step for finding TFBSs (Transcription factor binding sites) within the raw genome sequences of higher eukaryotes (large sizes of the genomes). DNA sequence motifs are short length, recurring patterns in DNA and are known to be associated with a biological function. These motifs sometimes indicate sequence specific binding sites for proteins such as nucleases and transcription factors (TF). Some sequence motifs are involved in biological processes at RNA level, such as ribosome binding, mRNA processing (splicing, editing, polyadenylation) and transcription termination. Motif identification is important at protein level for biological processes such as protein-subcellular localization, protein membrane, protein-protein interactions, identification of active site of enzyme(s) and post-translational modifications. Motif search is useful in understanding gene function, human disease, drug design, etc. Regulation of splicing in eukaryotes occurs through the coordinated action of multiple splicing factors. Sequence motifs are also useful in the study of genetic regulatory networks and regulatory program of individual genes.

Shrubs are usually woody or semi-woody perennial plants; their branches arise from the base of the plants and grow up to the height of 3 to 4 meter. Many shrubs, which are more or less prostrate, make excellence ground flower. Availability of a large number of species & cultivars, a wide range of variation in shape & size of the plants, diversified types of leaves, growth habit, remarkable ranges of size, shape, colour of flowers & the variety of fragrance have made the shrubs as important garden plants. Several species of shrubs have unusually attractive colours.

Most of the shrubs are hardy & grow in all types of soil with little attention. Although some plants flower almost throughout the year, in most cases they are seasonal. A selection can be made in such a way that some plants in the shrubbery will be in bloom in any season of the year. Most of these plants are fairly quick growing and when vegetatively propagated, start flowering in the first year. Plants like Bauhinia acuminata (Kanchnar), Cassia alata (Candle Bush), Vinca rosea,which are usually grown from seeds also produced flowers in the first year.Shrubs can be classified into three groups according to the requirement of the sunlight for growth & flowering:

Key facts

    
•    Endocrine disrupting chemicals (EDCs) are micropollutants with estrogenic or androgenic activities at very low concentrations and are emerging as a major concern for water quality.
    
•    EDCs include natural and synthetic hormones (Estrone or E1, 17b-estradiol or E2, Estriol or E3, 17a-ethynylestradiol or EE2); alkylphenols (nonylphenol or NP; octyphenol or OP), phenols (bisphenol-A or BPA), phthalates (Di-n-butyl phthalate or DBP, Di-2-(ethylhexyl)-phthalate or DEHP); organotins (tributyltin or TBT); and phytoestrogens (b-sitosterol, coumestrols, genistein). 
    
•    Wastewater treatment plants, intensive livestock effluents, industrial wastewaters, landfill, paper and pulp mill effluents and antifouling paints are important sources of EDCs in the environment.

Key facts
    
•    Biotoxins are naturally occurring toxic compounds produced by some freshwater cyanobacteria (blue-green algae) and marine algal species (dinoflagellates, diatoms).
    
•    Tonnes of pharmacologically active substances are used annually in human and veterinary medicines, some of these substances are excreted (human and animal) non-metabolised or an active metabolites and enter into the environment since waste water treatment plant (WWTP) cannot degrade them.
    
•    In Europe, around 4,000 different pharmaceutically active compounds are used as human and veterinary drugs and the annual consumption is about several hundred tonnes.
    
•    European Union and the United States laws require an assessment of potential risks to the environment as part of license application processes for new medicinal products.

•    Pharmaceutical products are generally polar, water soluble and low volatile molecules, it means that they have high mobility in the environment.

3.1. Introduction

This chapter intends to examine the economic importance of cotton, turmeric and castor seed in the agricultural economy of Odisha. Given the fact that Odisha is one of the major producing states of the country for these three crops, their physical markets have national level relevance in terms of determining prices. The chapter presents a brief profile of the agricultural economy of Odisha with a focus on these three crops and their supply conditions including cropping season, pattern, area under cultivation and productivity. Secondly, it tries to investigate the market structure, supply chain and marketing practices in cotton, turmeric and castor seed based on the data obtained from the secondary sources.

Indian economy is agro-based and agriculture is its mainstay as it constitutes the backbone of the rural livelihood security system. Agriculture has been and still continues to be the life line of the Indian economy since economic security is essentially predicted upon the agricultural and allied sectors. The agriculture sector encompasses crop production, animal husbandry, fisheries, agri-business, etc. Crop production depends upon crucial inputs such as good seeds, fertilizers, pesticides, irrigation, human labour, machinery and management.

As the largest private enterprise in India, agriculture supports more than 60% of the population, contributes nearly 19% to India’s Gross Domestic Product (GDP) and 11% to the total exports. Around 51% of the geographical area in India is already under cultivation as compared to 11% of the world average¹. Agriculture is also a social sector where non-trading concerns like food and nutritional security, employment and income generation, poverty alleviation, ecological and environmental concerns play a significant role.

Commercial capers are the immature flower buds, which have been pickled in vinegar or preserved in granular salt; they are used raw or cooked as condiment in different recipes. Semi- mature fruits (caper berries) and young shoots with small leaves may also be use as a condiment in salads or as an appetizer before meal. Capers and caper plants, wild and/or cultivated, are used in almost all the area of Capparis subgenus Capparis, extending from West Africa to the Norfolk islands in the Pacific, and most of the species are of alimentary or medicinal interest (Rivera, Inocencio, Obón & Alcaraz, 2003).

Capparis is a term coined by Theophrastus (4th cent. BC) and validated by Dioscorides (1st cent. AD) (Êáððáñéò), although it seems not to have come into wide use until the spread of the Arab world.
 
Caper and its relatives in several European languages can be traced back to Classical Latin Capparis “caper”. Latin Capparis, in turn, was loaned from Greek kapparis [êáððáñéò], whose origin (as that of the plant) is unknown but probably West or Central Asia. Another theory links kapparis to the name of the island Cyprus (Kypros [Êáðñïò]), where capers grow abundantly.

Sixteen chemical elements are known to be important to a plant’s growth and survival. The sixteen chemical elements are divided into two main groups: non-mineral and mineral.  The Non-Mineral Nutrients are hydrogen (H), oxygen (O), and carbon (C). These nutrients are found in the air and water.
  
In a process called photosynthesis, plants use energy from the sun to change carbon dioxide (CO₂ - carbon and oxygen) and water (H₂O- hydrogen and oxygen) into starches and sugars. These starches and sugars are the plant’s food. Since plants get carbon, hydrogen, and oxygen from the air and water, there is little the farmers and gardeners can do to control  how much of these nutrients a plant can use.

1. Introduction

Sustainability embodies an ecological vision aimed at fostering enduring human coexistence on Earth. Over time, its definition has evolved in literature and context, generating ongoing debate. Generally, experts frame sustainability around three pillars: social, economic, and environmental. While environmental concerns often dominate discussions, sustainability encompasses broader challenges like pollution, land degradation, biodiversity loss, climate change, and ecosystem service decline. This concept influences decision-making globally, politically, and personally.

Sustainable development, often used interchangeably with sustainability, is distinguished by UNESCO as a long-term objective versus the diverse processes and pathways to achieve it. Within the economic dimension, the tension between welfare and environmental preservation is explored through concepts like “weak and strong sustainability,” acknowledging the necessity of trade-offs. Ideal policies would aim to decouple environmental degradation from economic growth.

Environmental sustainability is pursued through various means such as ecosystem preservation, collaborative resource management, reducing food waste, advocating plant-based diets, managing fertility rates to curb population growth, and transitioning away from fossil fuels towards clean energy and innovative green technologies.

The plant roots, soil animals and microorganisms make up soil biological communities, accelerate biochemical activities through intra- and extra-cellular enzymes and interact in such a manner that biogeochemical cycling on this earth continues uninterrupted. Without intermeshing vital processes of soil microflora, microfauna and associated mesofauna, the soil would have become a repository of plant residues and animal remains with no facility for recycling the vital nutrients for plant growth, thus halting the whole process of geo-chemical recycling in nature. Though living component rarely makes up more than 4% of the total soil organic carbon, it plays vital role in geochemical recycling, soil development and ecosystem stability.

1. INTRODUCTION

Flavour is a distinctive property of a substance affecting the gustatory sense. It may be defined as “The sum of those characteristics of any material taken in the mouth, perceived principally by the senses of taste and smell, and interpreted by the brain.” Flavour perception is a complex process which requires the particles to be mixed with saliva and salivary enzymes to promote the release of flavour. Flavour molecules are very diverse in nature. More than 5000 compounds in food have been identified as flavour components which can be detected at very low concentration and are thus, used in products at very low levels. Hexenols and hexenals, characteristic of green taste of fresh fruits and vegetables, can be perceived at a concentration of about 1 part per million (ppm). Naturally occuring flavour compounds are present at a very low concentration ranging from parts per trillions (ppt) to parts per millions (ppm) level. Majority of these compounds are volatile, with boiling points in the range of 20-300 °C. Most of these compounds are lipophilic and possess a great diversity of chemical group and structure with molecular weight ranging between 50-250 g/mol.

Flavour and fragrance compounds are a part of expanding industry with an estimated cost of nearly $27 billion. These comprise of diverse molecules with unique structures and functional groups that contribute to varied aroma and flavour, ranging from floral to fruity notes. The processing operations modify the equilibrium between the different components in raw food that might weaken the original flavour, which require subsequent supplementation. These flavour supplements can be natural or chemically synthesized. Of all the available flavour compounds, around 80% are produced by chemical synthesis whose use is limited due to formation of racemic mixtures and lack of substrate specificity. The growing awareness of consumers towards chemicals supplemented to food has led to the development of the flavouring compounds of biological origin referred to as natural flavours or bioflavours. The first major source of flavour compounds was primarily from plants. Identification of microbes producing vital food flavourants paved the way for alternative low cost, efficient and flexible method for the commercial production of flavour compounds.

5.1. INTRODUCTION

Temperature is the one of the most important environmental element influencing the plant growth and development limiting the productivity and adaptation of crops, especially when it coincides with critical ranges (Chen et al., 1982; Paulsen, 1994). Nearly all commercial crops in the arid and semi-arid tropics often suffer from heat stress. Every plant has an optimal temperature for its normal growth, deviation from this may cause stress to plants. The adverse effects on plant of temperatures higher than the optimal considered as heat stress. Crops are exposed to periods of heat stress during their life-cycle. The optimum temperature for the most species ranges from 25 to 35 0C. Above this value, a decline in the photosynthesis rate is observed (Berry and Bjorkman, 1980; Pimentel, 1998). Even brief periods of heat-shock between temperature ranges of 45-50 0C induce marked change in plant growth processes.

‘Cucurbits’ is a term coined by Liberty Hyde Bailey for cultivated species of the family Cucurbitacae (Robinson and Decker-Walters, 2004). Presently, the term has been used not only for cultivated forms, but also for any species of the family Cucurbitacae. Among vegetables, the cucurbits form one of the largest groups with their wide adaptation from arid climates to the humid tropics.

C - enamel can: The sulphur resistant lacquer is golden coloured and the can coated with it are called C-enamel can or sulphure resistant can, used for packing non acid products (Plate 143).

CA storage: Storage of commodities under gaseous atmosphere like gas storage, where the composition of atmosphere is controlled accurately. MA and CA differ only in degree of control and CA is more exact. These storage methods in combination with refrigeration markedly enhance storage life of fruit and vegetables (Plate 144).

CAC: It stands for Codex Alimentarious commission (1962). It is a joint commission of FAO and WHO, comprising of 146 member countries. It ensures consumer food safety, establish fair practices in food trade and promote the development of international food standards. CAC make standards for food additives, veterinary drugs, pesticide residue and other miscellaneous substances that affect consumer safety. These are published in Codex Alimentarius.