eChapters

In nature there are nearly 300 nuclei, consisting of different elements and their isotopes. Isotopes are nuclei having the same number of protons but different number of neutrons. These techniques are now being used in almost all the areas of plant physiology, soil chemistry and plant biochemistry. In agriculture, radioisotopes are used in the nutritional studies of major and minor elements, plant metabolism, mechanism of photosynthesis studies, and uptake of nutrients and ions mobility in soil. In applying this technique, a minute quantity of radioisotope element is usually mixed with ordinary element of the same kind, the whole batch is termed “tagged” and their role in chemical reactions is traced. The radio labeled fertilizer has been used to study the uptake, retention and utilization of fertilizers.

Radioisotopes are used for determining the function of fertilizer in different plants. The tracer technique is used to study the rate and direction of movement of an element in a plant. For this a radioisotope of that element is injected in the ground near the plant. After a few days the plant is laid on a photographic paper to produce an autoradiograph. The dark areas in the radiograph show the positions reached by the element. This technique gives valuable information regarding the optimum season for fertilizing crops and for poisoning weeds. Use of N¹⁵ in organic fertilizer studies has significantly advanced the understanding of N release from organic materials. Crop residue or green manure studies are relatively simple. These techniques have been extremely useful in determining how residue quality parameters affect mineralization values. Because of the attention focused on nutrient cycling and management studies in recent years, a number of new P isotope techniques have been developed.

1. Neutron activation analysis

This technique is used in qualitative and quantitative analysis. If an element present in a sample is to be identified by neutron activation analysis, the sample will be bombarded with slow neutrons or other charged particles and converted into radioisotope. It is one of the most sensitive and specific methods available for the determination of trace quantities of a wide range of elements. From the half life measurement, it is possible to identify the element from which the radioisotope has resulted. Also the quantity of element present in a given sample can be calculated by this technique.

16.1 Introduction

The ancient Greek philosopher ‘Heraclitus’ said, that, “You can’t step into the same river twice”. By this, he meant that permanence is an illusion and changes are inevitable. One of such changes, which has created buzz all over world is climate change. To understand the science behind climate change, the first step would be to know about the periodic changes in earth’s climate. Scientists devised innovative techniques to recover evidence from the distant past, first from deposits left on land, then from sea floor sediments, and one of the finest techniques of drilling deep into ice. Evidences from past climates help us to understand the evolution of the earth’s atmosphere, oceans, biosphere, and cryosphere. At the same time, paleo-climate studies help in quantification of properties of earth’s climate, including the forces that drive climate change and the sensitivity of the earth’s climate to those forces. When scientists investigate causes or complex processes in the present and future, they may find evidence in the past that helps them in mapping out the complexities (McMullen and Jabbour, 2009). The paleo-climatologists succeeded brilliantly and discovered strangely regular pattern of glacial cycles, which helps in prediction of future changes.

Introduction

Global population growth has led to an increase in demand for energy, food, and other essentials, resulting in an increase in agricultural land. Poor farming techniques, urbanization, and a lack of soil management measures have negative consequences for agricultural soils, such as reduced soil fertility, migration of soil organisms, and loss of soil microbiota and ultimately loss of soil health(Mehmood et al., 2020; Omotayo and Babalola, 2021; Syed et al., 2022). In addition, fertilizers used in agriculture have an impact on soil quality and health. Soil fertility is defined as the ability of a soil to meet the physico-chemical and biological requirements of a plant for growth, reproduction and quality, taking into account plant and soil type, land use and climatic conditions (Abbott and Murphy, 2007; Tyagi et al., 2019).

INTRODUCTION

Aquaculture is a technology driven industry which relies a lot on research to develop species diversification in culture system as well as in the appropriate technology for commercial production. The rapid development of aquaculture in the world depends largely on the availability of fish feed; which are traditionally based on fish meal as the main protein source (Hardy & Tacon, 2002; Krishnankutty, 2005; Yigit et al., 2006) but the major challenge is its availability, quality and cost (Ghazala et al., 2011; Tabinda and Butt, 2012). In the aqua feed formulation, protein is the main but expensive ingredient and its quality and quantity in fish feeds formulation plays a vital role in promoting fish growth (Pandian, 2001). Dietary protein provides essential and non essential amino acids to synthesize body protein and energy for maintenance. According to fish species, fish size, dietary protein sources and environmental conditions protein requirements ranges from 300 to 550 g /kg (NRC 1993).

In India there is a significant development in fresh water aquaculture in last few decades contributing greatly to overall fish production of the country. The fresh water aquaculture is crossing the traditional boundary of concentration on farming of major carp and entered the arena of diversification to the culture of other species like catfishes. So far in India majority of research works were concentrated on development of commercial fish feed mainly for carps and shrimps. To fulfill the objectives of large scale culture of cat fishes and development as an economic proposition, it is necessary to take up induced breeding and larval rearing of commercially important catfishes in controlled conditions and develop easily adoptable package of practices of the same to cater to the needs of interested fish entrepreneurs. Among the catfishes, Clarias magur, an air breathing species and popularly known as ‘magur’ or ‘walking catfish’ is a high valued fish in the Indian subcontinent and fetches higher price than many other fishes including major carps and it is highly revered for its nutritious flesh which is therapeutic in nature, hence, better prospects are there for developing its culture (Hussain et al., 2016). Vishwanath (2010) reported that this species is very much popular in Bangladesh due to use as important part of the diet for children and lactating mothers and also prescribed as diet for the convalescent of the patients. This fish is highly regarded for food due to its high protein (15.0%), low fat (1.0%) and high iron content (710mg/100g tissue). Paul et al. (2015) in their studies on Indian catfish namely magur (Clarias batrachus) and singhi (Heteropneustes fossilis) for proximate composition and mineral content concluded that both the fishes are rich in protein, fat and minerals content irrespective of their size and season.

Introduction

The country’s population is growing at fast pace putting pressure on agriculture sector to grow more with declining resources. Proper planning and management become ever more crucial to ensure the sustainability of food production with minimal environmental footprints. Space technologies have unique advantages of providing large area synoptic coverage, with repetitive, objective and scientific datasets essential for monitoring a hugely vast and heterogeneous country like India. Agriculture being very dynamic and highly dependent on different natural resources needs continuous monitoring. Therefore these technologies have immense potential for application in the agriculture sector of the country. Space based technologies provide information on crops and natural resources on a real-time basis, proving unmatched opportunity for planning including in-season manipulation of crop production and management practices improving the resilience of farming against weather aberrations. Advanced estimates of regional agricultural output are critical to anticipate and mitigate the course of food shortage from sudden crop failure.

Incidentally, the first practical application of remote sensing in India was in the field of agriculture, wherein early detection of coconut wilt disease in Kerala was possible using air borne infrared cameras (Dakshinamurty et al. 1971). To explore the potential of space technology through satellites Joint Experiment Programme (JEP) started for defining the appropriate configurations of sensors in Indian Remote Sensing (IRS) satellites during the early 1980s. After exhaustive field experimentation, the potential of remote sensing (RS) technology to estimate crop yield and area to forecast its productivity at district and regional level due to the multispectral, large area and repetitive coverage was established. By that time this technology was being used operationally used by a few advance nations. With the launch of the first IRS satellite IRS-1A in 1988, in India

Ultrasonography in goat is becoming popular in the field of reproduction and replacing the other old-age techniques, viz. abdominal ballotment, recto- abdominal probes, X-rays and radioimmuno-assays. The reasons are numerous such as unsatisfactory results, hazardous effects to animal, operator or environment, high cost, long delay in diagnostic results and requirement of sophisticated labs. The ultrasound system has low operating cost and does not need special labs as it can be done at farm itself. Ultrasonography is considered safe to the animal and the operator and provides quick and reliable results. The popular opinion about ultrasonography is that it is noninvasive imaging system and is rapid, safe and practical means of diagnosis of pregnancy and reproductive disorders in sheep and goat. The B-mode real time ultrasonographic system particularly portable system is popular among researcher and practitioners. In goat, B-mode real time ultrasonography was used in 1971, using 5 MHz frequency transducer. A transducer of switchable frequency from 7.5 to 5.0 is more popular in small ruminant research and practice.

Real time ultrasonography provides means to directly image the reproductive tract. An extensive amount of information can be gained from even a single examination, including determination of ovarian (luteal or follicle detection) and uterine status, detection and monitoring of ovarian and uterine pathology, monitoring the post-partum mare, detection of twins, prediction of ovulation, fetal growth and development and determination of sex of fetus. When first introduced the use of ultrasonography was primarily limited to early pregnancy diagnosis only, with advancement of knowledge and interpretive skills, the diagnostic ultrasonography has a much more application in reproduction. Some of the applications are discussed in this lecture.

Procedure

The procedure and precautions for intrarectal ultrasonographic examination are similar to those for rectal palpation, and no additional restraint is required. The transducer should be protected by the examiner’s hand to prevent trauma to the rectal wall, and the transducer should be well-lubricated. Care should be taken to avoid fecal material attaching to the transducer. After evacuating fecal material from the rectum, the probe is introduced and moved across the reproductive tract in the following pattern: uterine body, right uterine horn, right ovary, right uterine horn, uterine body, left uterine horn, left ovary, left uterine horn, uterine body then cervix. Good contact must exist between the transducer and rectal wall. Air in the rectum or a gas or fluid-filled loop of bowel will result in a distorted image. To minimize scanning errors, principally those of omission, it is recommended to conduct the same scanning procedure during each examination.

ABSTRACT

Probably since the beginning of agriculture, farmers have recognized the value of rows of trees/ shrubs planted in the farm (called as Agroforestry) which offers environmental protection, crop and livestock production and reduce the soil health hazards. The role of agroforestry is immense in the undulating terrains like North East India, rain fed area like Central India or the problem soils in general. Even though research and extension work is on the way to increase the trees out side the forest, the information and knowledge on best tree + crop combination is either scarce or limited to regions in the form of research articles, books or  journals. The recent scope of Information and Communication Technology (ICT) and its applicability due to its easy, fast and any where accessibility have opened the window of opportunity towards the scientific agroforestry and farm forestry developments. One such means of ICT is through the availability of useful databases and websites on agroforestry.

14.1.2 How it Works
• Temperature Rise: When the temperature rises, the alcohol in the bulb expands, pushing the mercury up the arm on the maximum temperature side. The mercury pushes the index upwards, and this index stays at the highest point reached as the mercury falls back down with decreasing temperature.
• Temperature Fall: When the temperature falls, the alcohol in the bulb contracts, pulling the mercury down on the minimum temperature side (and thus up on the maximum side). The mercury on the minimum side pushes its index upwards. As the temperature rises again, the mercury retreats, leaving the minimum temperature index at the lowest point reached.
• Reading the Thermometer: To read the maximum temperature, you look at the lower end of the index on the maximum temperature scale. To read the minimum temperature, you look at the lower end of the index on the minimum temperature scale. The current temperature can be read from either side by noting the position of the top of the mercury column.
• Resetting the Thermometer: After taking the readings, the indices need to be reset. This is typically done using a small magnet to pull the steel indices back down to the current level of the mercury.

Introduction

While tracing the history of veterinary medicine, we come across the Chinese writings about the diseases of horses, oxen and buffalos in the past about 2500 B. C. Similarly we can find about 4000 years old.  Indian art showing the people caring the horses and elephants. Even we can find in the art about ancient Egypt how they cared for their cattle and dogs health. The Ancient Romans had a word for the people that are doctors for animals, which is, veterinarius. In about A.D. 500 a Roman wrote a book on what veterinarians do.  In 1598, Carlo Ruini, an Italian author wrote a book named as, “Anatomy of the Horse”.

All these methods of utilization and the conversion to useful energies depend on the climate, population density of the area and the basic infrastructure. It is important to work out the market for the products which are produced.
 
Bio-waste management: It needs to take from small actions to the ambitious ones. European Commission proposes to use wastes which could make up to 25% of total energy consumption by 2020. They propose to have directives for the promotion of renewable electricity (Directive 2001/77/EC) and biofuels (Directive 2003/30/EC). The waste production in Europe has gone upto 2 kg per capita per day. Recycling rates are also rising (European Commission, 2017). The Member states must develop a national action plan and outline the national policies to develop existing biomass resources and mobilise new biomass resources for different uses. A European project has studied the amount of renewable energy to be used in 2020. According to them it will be around 195 million tons of oil equivalents (Mton) of biomass which is biodegradable part of MSW. This will be 20% of renewable energy target. It has also been estimated that the amount of bio-energy from the MSW will be 20 Mton, which would account for around 7% of all renewable energy in 2020. This may be available after composting and anaerobic digestion (Atanasiu, 2010).

Abstract

Climate change is today’s major concern throughout the world. All sectors have been influenced with the impact of climate change. Similarly, agriculture sector has also been affected with the worse climatic changes. All components of agricultural production system like water, soil, vegetation, organism and microorganism etc. affected greatly due to climatic abruptions. And thus, the productivity is hampering day by day. Today, we requires to predict the trend of changes in climatic parameters like maximum and minimum temperature, humidity, wind speed, sunshine hours etc, to project future change in these climatic parameters, to assess the effect of theses climatic parameters on agricultural components like water resources, soil, vegetation, organism and microorganism and, also to find the adaptation and mitigation strategies.  All these works have beenmainly done by manual methods earlier. Developed country like USA, Japan, UK etc adopted the computer modelling to climate change research. Computer modelling and software assistance have been adopted slowly in developed countries. Since, climatic changes requires processing of very large number of data, they needs computer and software assistance. Without computer assistance climate change research seems to be impossible.

Forage preservation as silage is a key component of high input (zero-grazing) systems (Mannetje, 1999). It has allowed producers to intensify the productivity of the land and the productivity of the livestock. Large quantities of forage can be conserved in a short time, forage conservation is less weather dependent and thirdly, silage is well suited to mechanization. However, a major disadvantage associated with silage making is that the feeding value of the resultant forage is reduced relative to that of the original crop. Ensiling offers many advantages over haymaking.

INTRODUCTION

The emergence of Information and Communication Technology (ICT) has made the libraries more powerful in the collection development, processing and retrieval of information. The advent of internet has not only made it possible to connect the libraries over the world, but also to search a huge repository of databases. The technology has developed to online system to connect commercialize vendors as well as learned societies with the databases to seek and obtain the needed information. The use of computer and digital technologies in teaching and learning has been evolved not just through the increase of distance learning or virtual courses but through the use of cyber education as an adjunct to the traditional classroom. This increased the trend of access to technology in Library and Information Centers and has given the opportunity to use those resources and improve the skill. In order to acquaint themselves with the new technological environment, the users are required to be more conversant with those skills.

Libraries & Information Centers play an important role in supporting the teaching, learning, research and extension programme of universities. These are made possible by building and developing good collection of selected documents both in print as well as digital form and by supporting it with various services for their dissemination. There is such an exponential growth of information in today’s era that students, faculties, research scholars often lack the scope of getting proper education or instruction to use those resources to the optimum possible limit. To overcome this difficulty and to maximize the use of such resources proper library instruction must be imparted to the user community which is otherwise known as Library User Education.

USER EDUCATION

User Education can be defined as a program to guide and to instruct the potential users either individually or collectively. User education is an action taken by the Library staff to train / educate their users so as to make full use of the existing knowledge to develop their community.

ALA Glossary defines user education as it encompasses all types of activities designed to teach users about library services, facilities and organizations library resources and search strategy.

User education can be defined in the context of electronic sources of Information as educating the users how to operate computer and searching Information on Net using various search strategies and to educate them how to use electronic sources of information and various databases.

Users of the library must be convinced that continuing learning is worthwhile and that the process of education does not end with examination. They must have confidence to be learners and to stand of their own, to possess autonomy to select and to direct their own future study experience. User education has been defined by Mews as “instruction given to readers to help them to make best use of library”. User education was not solely to stimulate library use as this but one of the sources of Information. According to Nancy, Fjalbarnt and Lan Malley “ User Education is concerned with the whole Information and communication process and one part if this involves the total interaction of the users the library. This should be a continuous process starting with schools and public libraries and with possibility of extension to academic and specialized libraries. According to Jacques Tacathan, Director of UNESCO general Information Program “User Education is to include any effort or program which will guide and instruct existing and potential user in the recognition and information service and their assessment.

Information Technology can play an important role in disseminating agricultural information to the farmers by using various multimedia sources. Farmers are more desirous and anxious to get quick, accurate and authentic information in the changing scenario of agriculture at local and at global levels. Dissemination of the required and recent agricultural information to the farmers in scattered villages at the variegated geographical situation in India is very difficult task. Transfer of technology to farmers is not a one time exercise because new farm technology is being constantly evolved. A continuous flow of technologies in an appropriate manner is vital to provide quick benefit for the development of the farmers. There has been a technological explosion in the field of agriculture. This demands that the farmer has to know all aspects of technology prior to its adoption. Hence Interactive Multimedia Module (IMMM) has potential to reach the unreached.

In fact, as the concept of synthetic seed involves the use of small propagules and enables the direct sowing of this material in vitro or in vivo, the technology could provide great flexibility to the breeders by not only reducing the costs when large quantities of propagules are required for handling, shipping and planting, but also eliminating the acclimation step when direct sowing in vivo is applied (Onishi et al. 1994).

The artificial seed technology has been applied to a number of plant species belonging to angiosperms. The exact application of artificial seeds will vary from species to species. In self-pollinated crops that currently have good seed production systems, synthetic seeds will not have any practical applications, but in cross pollinating species, especially those where seed production is difficult and expensive, synthetic seeds offer many advantages and opportunities. The importance of encapsulation technique as an aid to propagation in various crop plants has been discussed by many workers. By combining the benefits of vegetative propagation system with the capability of long-term storage and with clonal multiplication, synthetic seeds have many diverse applications in agriculture (Gray and Purohit, 1991; Redenbaugh et al., 1991; Redenbaugh, 1993). In some species seed propagation is not successful. The reason behind this may be due to heterozygosity of seed, small sized seed, presence of reduced or insufficient endosperm, and seedless varieties of crop species like grapes, watermelon, mango, guava etc. Sometimes association of mycorrhizal fungi is essential for seed germination, for example orchids. The germination of these seeds under natural conditions or under control environment is not possible. Propagating of these species through synthetic seed is the added advantage. The possible implications of synthetic seed technology have been detailed hereunder.

The history of plant growth regulation was knownfor many years before the time of Christ, when it was common practice in the Middle East to place a drop of olive oil on figs to promote development. The use of plant growth regulators (PGRs) to modify growth and flowering of pineapple began in 1930s. In eighteenth century when a carpenter was working in a greenhouse in the Azores Islandaccidently set fire to a pile of shavings. To the surprise of the grower who had thought his plants were ruined, they burst into flower instead of being damaged (Collins, 1960). In Hawaii, Rodriguez (1932) noticed in the pineapple fields that smoke from brush fires adjacent to the field caused premature flowering. The ingredients of smoke were subsequently found to be ethylene and acetylene, the unsaturated hydrocarbons. During the 1940’s, auxins were also shown to produce this effect,α-Naphthalene acetic acid (NAA), β-Naphthalene acetic acid (BNA), Fruitone and naphthaleneacetamide were the next forcing agent to become commercially used in pineapple. Since that time many works have been carried out with improving results like natural and synthetic compounds that alter function, shape and size of crop plants have been discovered. Today, specific PGRs are used to modify crop growth rate and growth pattern during the various stages of development from germination through harvest and post-harvest preservation. The use of regulating chemicals has become an important component of agro-technical procedures for most of the cultivated plants and especially for fruit plants.

Introduction

An ionophore is a lipid-soluble molecule usually synthesized by microorganisms, which transport ions across cell membranes of susceptible bacteria, dissipating ion gradients and uncoupling energy expenditures from growth to kill these bacteria. The term ionophore was first used in 1967 for their ability of organic molecules to bind metal cations and form lipid soluble complexes that facilitate their transport across cell membrane. The ionophore antibiotics show wide varieties of biological activity ranging from antibacterial, antifungal, antimycoplasma, antiparasitic, antimalarial, antiviral, anti-inflammatory and tumourcell cytotoxic activity (Augustine, et al., 1987; Gumila et al., 1996). Presently seven polyether antibiotics include monensin, lasalocid, salinomycin, narasin, maduramycin, laidomycin and senduramycin are used around the world in various segments of cattle and poultry industries. These ionophores are mainly used as anticoccidial drugs in poultry and growth promoters in the ruminants. Polyether antibiotics are not used in human but recently, it has been shown that some of these compounds are able to selectively kill human cancer stem cells and multidrug resistant cancer cells. Hence, they are recognized as new potential anticancer drugs.