eChapters

Clinical Symptoms

• Anchor worms can be seen with the naked eye

• Frequent rubbing or “flashing”

• Localised redness

• Inflammation on the body of the fish

• Tiny white-green or red worms in wounds

• Breathing difficulties

Clinical Symptoms • External haemorrhages

• Pale gills • Ascites

• Destruction of tissues in the kidney, spleen, and liver

• Excessive mucus secretion

• Skin hemorrhages with edema of the tissues

• Skin ulceration around the mouth and base of the fins

Causative Agent: Rhabdovirus

Host (Common sp.)

• Common carp

• Koi carp

• Crucian carp

• Silver carp

• Bighead carp

• Grass carp

• Goldfish

Clinical Symptoms

• Gasping for air

• Discoloured gills with trapped materials

• Swollen gills with enhanced mucous secretion

• White to grey spots on the gills

• Diseased fish gather near the outlet of the pond

• Fish become lethargic and remain on the surface waters

Causative Agent: Flavobacterium branchiophilum, Cytophaga spp., Flexibacter spp.

Host (Common sp.)

• Goldfish • Koi carp

• Cichlids • Fighter fish

• Gourami fish

A key challenge for the years to come is feeding a rapidly growing human population while lowering the impact of food production on the environment. This is particularly true for low and middle-income countries where the demand for animal protein is likely to rise and further increase several folds in existing environmental changes (e.g., droughts, floods, extensive wildfires) have in recent years led to major food crises. To achieve these goals, food production not only needs to be increased, but most of all, good husbandry practices must be followed to reduce its negative impacts on the environment. Several studies have suggested that shifting the human diet towards increased consumption of f ish and seafood could be a solution to the need for protein that would sustain human and environmental health. In fact, fish and seafood consumption is forecast to increase by 27% on the horizon of 2030, mostly sustained by the aquaculture sector, which is expected to grow by 62% during the same period. The aquaculture industry contributes significantly to livelihood, food security, and poverty alleviation, with over 100 million people estimated to rely on aquaculture for their living. Fish is a cheap source of animal protein, and the current per capita consumption of fish in India is around 9 kg per annum, which is compared to the 11 kg recommended by the World Health Organisation (WHO). Presently, the contribution of the fisheries sector to the gross domestic product (GDP) and agriculture GDP has been estimated to be 1.2 and 4.2%, respectively.

Vitamins are naturally occurring, vital nutrients that are needed in small amounts. They are important for bone and tissue health, wound healing, growth and development, immune system function, and other biological processes. These vital organic substances serve a variety of biochemical purposes. Vitamins, like minerals, are not biosynthesized by the body. Consequently, in order to maintain our health, we must obtain them from the food we eat or, in rare circumstances, supplements.

Vitamins in Milk

Together with water- soluble vitamins like vitamin C and B complex and provitamins, milk also contains a variety of fat- soluble vitamins like A, D, E, and K. Some of these vitamins do, however, have very low concentrations.

Vitamin A (Retinol)

Plant foods contain carotenoids, which are the precursors of vitamin A, whereas animal foods provide preformed vitamin A in the form of retinyl esters.

The primary constituents of milk are water, fat, protein, sugar (lactose), minerals, vitamins, and enzymes. Milk is a thin emulsion made up of two phases: A continuous aqueous colloidal phase and a dispersed phase of oil or fat. It is an opaque white liquid containing fat in an emulsion, protein, and a few minerals in a colloidal suspension, and lactose along with soluble proteins and a few minerals in a true solution. The physical characteristics of milk are comparable to those of water, but they are altered by the degree of dispersion of the colloidal and emulsified components as well as the presence of different solutes, such as salts, lactose, and protein, in the continuous phase.

Physical Appearance, Color and Optical Properties

Fat globules and casein micelles scatter light, giving the appearance of turbid and opaque milk. The way that molecules scatter light has an impact on optical characteristics. When the wavelength of light and the particle’s magnitude coincide, light scattering happens. Consequently, light with shorter wavelengths is scattered by smaller particles and vice versa. Because casein micelles scatter blue light more than red light at shorter wavelengths, skim milk appears slightly blue. Cow’s milk has a creamy color because of beta- carotene, a carotenoid precursor to vitamin A. The greenish tinge in whey is due to the presence of riboflavin. Turbid and opaque due to scattering of light mainly by protein micelles and fat globules.

Electrophoresis

The mobility of ions in an electric field is the basis for the separation method known as electrophoresis. Ions that are negatively charged move toward a positive electrode, while those that are positively charged move toward a negative electrode. Usually, one electrode is biased either positively or negatively, and the other is at the ground for safety reasons. Ions can be distinguished from one another based on their size, shape, and overall charge, which determine their migration rates.

Poly Acrylamide Gel Electrophoresis (PAGE)

Introduction

Electrophoresis is an electrochemical process in which substances with a net electric charge migrate under the influence of an electric current. This migration occurs in an agar gel or a liquid- filled buffered matrix such as cellulose acetate. Positively charged substances travel toward the cathode (negative electrode), while negatively charged substances go toward the anode (positive electrode). Different substances move at different rates depending on their charge. This movement is called electrophoretic mobility.

Proteins are charged molecules. They have a positive as well as a negative charge. Among proteins, particularly caseins, they have different contents. The charge density also varies depending on the molecular weight. Proteins have a net negative charge at a pH above 4.6, and hence they move towards the anode (positive electrode) when subjected to an electric field under alkaline conditions. Due to differences in the charge of individual protein fractions, their migration rates also differ and are hence separated into distinct bands. These bands are stained with the dye amido- black, destained with 7% acetic acid, and observed for the electrophoretic pattern.

Food adulteration is a global issue, and because there are insufficient regulations and oversight, developing nations are more vulnerable to it. But in many nations, food adulteration has gone unnoticed. Contrary to popular assumption, milk adulterants can, regrettably, present major health risks that result in fatal diseases. Modern milk adulteration involves increasingly complex techniques, necessitating state- of- the- art research to identify the adulterants. Because milk contains so many nutrients that are needed by both adults and infants, it is referred to as the ideal food. In terms of protein, fat, carbohydrates, vitamins, and minerals, it is among the best sources. Regretfully, milk adulteration is a very common problem worldwide. Potential causes could be the gap between supply and demand, the perishable nature of milk, the low purchasing power of the consumer, and the absence of appropriate detection tests. Because there is insufficient oversight and inadequate law enforcement, the situation is substantially worse in developing and underdeveloped nations. While quantitative detections of adulterants in milk are varied and complex, qualitative detections can be carried out simply using chemical reactions. The type of quantitative detection methods used depends on the milk’s adulterants.

Typical Adulterants in Milk

The addition of vegetable protein, milk from different species, whey addition, and watering are the main adulterants in milk that are known to be economically motivated. There is no serious health risk associated with these adulterations. Some adulterants, though, are too dangerous to ignore. Urea, formalin, detergents, ammonium sulfate, boric acid, caustic soda, benzoic acid, salicylic acid, hydrogen peroxide, sugars, and melamine are a few of the main adulterants in milk that have been shown to have serious negative health effects.

The terms “cultured dairy foods,” “cultured dairy products,” and “cultured milk products” are other terms for fermented dairy products. Lactobacillus, Lactococcus, Leuconostoc, and other lactic acid bacteria, along with yeasts in certain products, are used to ferment milk to make these dairy products. The product’s shelf life is extended through fermentation, which also improves the product’s taste and milk’s digestibility. There is a wide variety of fermented milk products available, each with unique flavors and attributes. The following categories apply to fermented milk products, based on the type of fermentation.

Changes in Nutrients Resulting from Fermentation

Fermentation lowers the lactose content in fermented milk products; however, if the starting milk is concentrated or fortified, the finished product’s lactose content may be higher than that of liquid milk.

The composition and content of protein and total amino acids are comparable to those of raw milk. Casein degradation is small compared to cheese, accounting for not more than 1% of the total protein. While some products of casein degradation are used by the starter microorganisms, others build up as free amino acids in the fermented kinds of milk. The amounts of free amino acids that build up differ depending on the species. Generally, proline is increased in large quantities, followed by serine, alanine, valine, leucine, and histidine. As a result of continuous starter culture activity, the level of free amino acids increases during storage. A limited degree of lipolysis occurs during the manufacture of fermented milk. The amount varies depending on the type of species, but the pattern and concentration of free fatty acids are both impacted. During fermentation and the breakdown of amino acids, trace amounts of volatile fatty acids are also produced.

Being an essential component of the rich Indian past, traditional dairy products and a sophisticated classification of confections have played a significant role in the Indian economy. Depending on how it is processed, it has significant social, cultural, and economic significance. These products have been developed over a long period using a combination of experience, traditional wisdom, and culinary skills. India is emerging as the highest milk- producing country in the world with an annual production of 221.1 million tons in the year 2021–22 (Source: Basic Animal Husbandry Statistics, MoFAHD, DAHD, GoI). An estimated 50% of the milk produced in India is used to make a range of traditional dairy products, including paneer, dahi, ghee, khoa, and shrikhand. The product is not only well- established in the Indian market, but it also has significant export potential due to the large Indian diaspora living all over the world.

All native milk products that have developed over time using locally accessible technologies are referred to as traditional Indian dairy products or Indian indigenous milk products. The Indian masses’ economic, social, religious, and nutritional well- being are greatly influenced by traditional dairy products.

Classification of Traditional Indian Dairy Products

Traditional dairy products in India are typically made, packaged, and/or sold using time- honored methods without the use of machinery or meticulous documentation of the procedure. These products do, however, have several technological advantages, including their widespread appeal, reduced cost of production, straightforward manufacturing process, adoption at the rural level or collection center, large profit margin, and abundance of employment opportunities. These products are categorized according to the manufacturing principle.

One of the most consumed and well- known milk products in the Indian subcontinent is ghee. It is a by- product of tradition, prepared both at organized dairy plants and the household level for a well- established market. Ghee is traditionally made from the milk of cows or buffalo. The tetrapyrrole pigments biliverdin and bilirubin are responsible for the distinctive color of buffalo ghee. On the other hand, ghee is golden yellow due to the presence of carotenoids in cow’s milk. Ghee’s composition changes according to the kind and feeding habits of the animal and can differ from place to place and season to season.

In addition to, being a substantial source of fat- soluble vitamins, essential fatty acids, and other growth- promoting components, ghee is a rich source of energy. Its value as food for humans is enormous. Additional attributes related to medicine are present in ghee. Ghee can improve one’s physical and mental attributes and treat eye conditions like ulcers. Ghee is used in religious and ceremonial rites in addition to being consumed.

Composition

Ghee is a complex lipid composed of mixed glyceride which makes up 99–99.5% of its total content. In addition, it has trace amounts of calcium, magnesium, phosphorus, iron, copper, and fat- soluble vitamins, tocopherols, carbonyls, hydrocarbons, carotenoids, free fatty acids, phospholipid, sterols, and sterol esters

The process of making dried milk involves eliminating water from milk, primarily through spray or roller drying. It is regarded as a significant sector of the dairy industry and is made from whole cow, buffalo, or standardized milk. Skim milk powder (SMP) is made from milk after the fat has been removed whereas whole milk powder (WMP) is made from whole cow or buffalo milk

FSSA (2006) Standard Of Milk Powder According to FSSA (2006), Milk powder is the product obtained by partial removal of water from the milk of cows and/or buffalo. The fat and/or protein content of the milk may be adjusted by the addition and/or withdrawal of milk constituents in such a way as not to alter the whey protein to casein ratio of the milk. It shall be of uniform color and shall have pleasant taste and flavor, free from off-flavor and rancidity. It shall also be free from vegetable oil/fat, mineral oil, thickening agents, added flavor, and sweetening agents. It may contain food additives. It shall conform to the microbiological requirements prescribed by FSSA (2006).

Water activity, high storage temperatures, longer than usual storage times, high product moisture content, high processing temperatures, and container headspace are some of the variables that affect the Maillard reaction in dried milk.

Casein and whey proteins are the major proteins present in milk. Unlike casein, whey proteins are heat-labile. Whey protein fractions present in milk are α-lactalbumin, β-lactoglobulin, bovine serum albumin, immunoglobulin, euglobulin, and lactoferrin. β-lactoglobulin and κ-casein interact during heat treatment. When milk is refrigerated for longer than 24 h, it forms γ-casein and protease-peptone fractions.

Commercially, one of the most significant milk products is ice cream. It is a frozen product which is usually made from milk or cream that has been f lavored with fruits like peaches or strawberries, and spices like vanilla or cocoa, or with sugar or a substitute. Stabilizers are sometimes combined with food coloring. Ice cream mix typically contains 10.0% milk fat, 11.0% solids not-fat, 14.0% added sugar, and 0.3% additives like an emulsifier, stabilizer, f lavor, and color substances.

Standard of Ice Cream

According to FSSA (2006), ice cream, kulfi, chocolate ice cream or softy ice cream means the product obtained by freezing pasteurized milk prepared from milk and/or other products derived from milk with the addition of sweetening agents and fruit products, egg products, coffee, cocoa, ginger, and nuts. It may also contain chocolate, and bakery products such as cake or cookies as a separate layer and/or coating. It may be frozen hard or frozen to a soft consistency. It shall be free from artificial sweeteners. It shall have a pleasant taste and smell free from flavor and rancidity. It may contain food additives. It shall conform to the microbiological requirements as given in FSSA (2006).

Concentrated milk products are obtained through partial removal of water which increases the dry matter content of milk. The increase in dry matter content in concentrated milk is proportional to the degree of concentration. The milk concentrate may be prepared from either full-cream whole milk or fat-free skim milk.

Depending on the nature of raw material and other non-milk additives concentrated milks are classified into four broad categories.

1. Sweetened condensed milk

2. Evaporated milk or unsweetened condensed milk

3. Sterile milk concentrate

4. Reconstituted concentrated milk

Sweetened Condensed Milk

One of the earliest dairy products to be produced industrially is sweetened condensed milk. According to FSSA (2006), sweetened condensed milk is the product obtained by partial removal of water from the milk of cow/buffalo with the addition of sugar or a combination of sucrose with other sugars or by any other process that leads to a product of the same composition and characteristics. The fat and/or protein content of the milk may be adjusted by the addition and/or withdrawal of milk constituents in such a way as not to alter the whey protein to casein ratio of the milk being adjusted. It shall have a pleasant taste and flavor and be free from off-flavor and rancidity. It shall be free from any substance foreign to milk. It may contain food additives. It shall conform to the microbiological requirement as laid down by FSSA. The said product shall also conform to the following requirements

Cheese is made from milk, with the addition of cream, buttermilk, and/or whey. This basic raw material is also called cheese milk. Cheese consists mainly of casein (the major protein of milk), other milk proteins, fat, other milk components, and a certain percentage of water, which is bound. Proteins are precipitated by enzymes and/or acidification as well as heat and are separated by suitable processes from the aqueous phase. (whey, serum). Cheese is most often molded, pressed, and salted and has fungal and bacterial culture additions. colorants, herbs, spices, and other non-dairy ingredients are also added to the cheese. It is consumed either fresh or at different stages of ripening.

Worldwide, there are more than 2000 types of cheese, sometimes made by very different manufacturing processes. A classification can be based on several aspects and is done in different countries according to different criteria. A general classification can be made for three major groups:

a. Rennet or natural cheese: manufactured straight from milk by using proteolytic enzymes (rennet) and acid, with a more or less pronounced ripening process.

b. Fresh cheese or non-ripened Cheese: Quarg, fresh cheese, and white cheese are examples. Its manufacturing process is similar to that of rennet cheese manufacturing, but it has a high degree of acidity and is not subjected to a proteolytic ripening process.

c. Long-life cheese (processed cheese): it is more often made from rennet cheese and is textured by thermal treatment and made shelf-stable.

Chemistry of Creaming

After being drawn from animals, normal milk will form a cream layer on standing. Because of the difference in density between fat globules (920 kg m−3 at room temperature) and milk plasma (density 1030 kg m−3), the granules tend to rise. This causes creaming, which we often want to prevent and it enables milk to be separated into cream and skim milk. Creaming is much enhanced when the globules have been aggregated into flocculates, clusters, or granules.

Cream Ripening

This unit operation serves as an intensive preparation of the cream for the churning process. It is divided into two categories.

1. Physical ripening;

2. biochemical ripening The following criteria are influenced by the cream ripening:

• Consistency, firmness, and spreadability of butter.

• Basic water content of butter during the manufacturing process (bound water in butter, which cannot be removed by any mechanical treatment).

• Buttermilk fat content, which has to be minimized.

The melting and solidification behavior of fat depends on the attached fatty acid, which indicate the hardness of the butterfat.

Natural hardness is caused mainly by seasonal feeding of the milk animals. Winter feed with a great deal of dry feed or roughage yields a hard butterfat with a high percentage of saturated and short-chain fatty acids and few double bonds in the fat molecules.

Summer feeding (green grass) results in fat with longer chains and a higher percentage of unsaturated fatty acids with many double bonds. We therefore distinguish between summer fat and winter fat or summer cream and winter cream.

Types of Enazymes in milk

1. Endogenous and 2. Exogenous.

Three sources of enzyme in milk:

1. The blood via defective mammary cells.

2. Secretory cell cytoplasm. Some of which are occasionally entrapped with fat globules by the encircling MFGM.

3. The outer layer of MFGM is probably the principal source of endogenous enzymes in milk. The outer layer of MFGM is derived from the apical membrane of the secretory cell which in turn originates from the Golgi membrane and acts as the principal source of enzyme in milk.

General Characteristics of Milk Enzymes

1. Deteriorative character e.g. lipase (commercially most important enzyme in milk), proteinase, acid phosphatase, xanthine oxidase.

2. Preservative enzymes. e.g. superoxide dismutase, sulfhydryl oxidase.

3. As an indicator of the thermal treatment history of milk. Related enzymes are alkaline phosphatase, ϒ glutamyl transpeptidase, and lactoperoxidase.

4. Mastitis infection indicator. Related enzymes are catalase, n-Acetyl-β D-glucosaminidase, and acid phosphatase.

5. Antimicrobial activity.

6. Commercial source of ribonuclease and lactoperoxidase

Common Milk Enzymes and their Role in Dairy Industry

The salts of the milk include those constituents that are present as ions or in equilibrium with ions. The main salts of milk are phosphates, citrates, chlorides, sulfates, carbonates, and bicarbonates of sodium, potassium, calcium, and magnesium. Approximately 20 other elements are found in milk in trace quantities including copper, iron, lead, boron, manganese, zinc, iodine, etc. These ions are more or less associated with themselves and with proteins. Some metals act as catalysts in the oxidation of milk fat leading to oxidative rancidity and certain metals like Ca, P, Mg, Mo, Co, Fe, etc. are components of metalloproteins such as lactoferrin, lactoperoxidase, xanthine oxidase, and parts of phospholipids.

Distribution of Salts Between Casein Micelles and Serum

The phosphorus is present as orthophosphate, but part of it is bound to organic components like serine and threonine residues of casein, molecules of hexoses and glycerol, phospholipids, etc. Phosphorus is also found in the hydroxyapatite structure of the colloidal calcium phosphate in the micellar structure of casein. The sulfur content of milk is about 0.36 g/kg, but most of it is in the amino acid residues methionine and cysteine of the proteins. About 10% is present as inorganic sulfate.

Physical Equilibria Among Salts

Milk contains several elements but all of them are not entirely in a soluble state. Some minerals exist in colloidal and ionic states at the normal pH of milk. The compounds that are in soluble condition play an important role in keeping various milk constituents in stable condition. A balance exists between the components that are in a soluble state and those which are in colloidal state.

Milk lipids or milk fats exist as an emulsion of small spherical droplets called milk fat globules. These globules are very small in size but very large in number. The diameter of the milk fat globules ranges between 0.1 and 22 µm and the number varies between 1.5 and 3.0 billion globules/mL. The average size of milk fat globules ranges from 2 to 5 µm. The average fat globule size in cow and buffalo milk are 3.4 and 4.5 µm, respectively. The surface of the milk fat globules is coated with an adsorbed layer of material known as the milk fat globule membrane (MFGM). MFGM contains phospholipids and proteins in a complex form. MFGM has two main functions (a) fat globule stabilization and (b) preservation of the fat globule’s identity.

General Composition

Triacylglycerols (triglycerides) represent 97–98% of the total lipids in the milk of most species. The diglycerides probably represent incompletely synthesized lipids in most cases. Although phospholipids represent less than 1% of total lipids, they play an important role in being present mainly in the MFGM and other membranous material in milk. The principal phospholipids are phosphatidylcholine, phosphatidylethanolamine, and sphingomyelin. Trace amounts of other polar lipids, including ceramides, cerebrosides, and gangliosides, are also present. Phospholipids represent a considerable percentage of the total lipid of buttermilk and skim milk reflecting the presence of proportionately larger amounts of membrane material in these products.

Carbohydrates are polyhydroxy derivatives of aldehydes or ketones and undergo all the organic reactions common to the carbonyl groups and hydroxyl groups. The principal milk carbohydrate is lactose. It is a disaccharide. Hydrolysis of lactose with enzyme β-galactosidase yields glucose and galactose.

Lactose is the major carbohydrate present in all types of milk. The first record of isolation of lactose was in 1663, by Bartolettus by evaporation of whey. Milk contains only trace amounts of other sugars, including glucose, fructose, glucosamine, galactosamine, neuraminic acid, and neutral and acidic oligosaccharides.

Lactose plays a significant role in milk and milk products that are

• It plays a major role in the production of fermented dairy products.

• It contributes to the nutritive value of milk and milk products

• It affects the texture of certain concentrated and frozen products;

• It is involved in heat-induced changes in the color and flavor of highly heated milk products.

Status of Lactose

Lactose content varies extensively in the milk of different species. Breed of animal, individuality factors, udder infection, and especially the stage of lactation regulates the lactose content in milk. The lactose concentration in milk decreases gradually and significantly during lactation; this behavior contrasts with the lactational trends for lipids and proteins, which, after a decrease during early lactation, increase significantly during the second half of lactation. Lactose synthesis is hampered during mastitis. Lactose, along with sodium, potassium, and chloride ions, plays the principal role in controlling the osmotic pressure of the mammary system. Thus, any change in lactose content is compensated by a change in the soluble salt constituents. The osmotic relationship between lactose and soluble salts during the secretion of milk partly explains the presence of high lactose in milk with a reduced ash content and vice versa (Table 1).

Bovine milk contains an average of 3.5% protein. The concentration of protein changes significantly during lactation. The first few days of lactation exhibit the main change in protein concentration. The main changes occur in whey protein fraction.

Distribution of Protein in Milk

80% casein and 20% whey protein (β lactoglobulin- 10%, α- lactalbumin- 5%, serum albumin, and immunoglobulin- 5%).

Fractionation of Milk Proteins Fractionation of milk protein is mainly done by acidification at pH 4.6 around 30 °C.

Almost 80% of the bovine milk protein precipitates at pH4.6, and this fraction yielded by precipitation is called casein.

The remaining soluble part of the protein is referred to as whey protein/serum protein/ non- casein protein. Wide variation is observed in the casein- whey protein ratio in different types of milk(protein synthesis is independent of animal diet)

Significant Difference Between Casein and Whey Protein

1. Casein precipitates at pH 4.6 but does not precipitate whey protein at that pH. This property of milk protein is commercially exploited for the preparation of industrial casein and certain varieties of cheese.

2. Chymosin or other proteolytic enzymes produce specific changes in casein resulting in coagulation in the presence of calcium. Whey protein does not undergo this type of coagulation.

3. Casein is very stable to high temperatures. They can withstand heating up to 140 °C for 20 minutes but whey protein is relatively heat labile. They are completely denatured by heating at 90 °C for 10 min.

4. Casein is a phosphoprotein containing an average of 0.85% phosphorous while whey protein does not contain any phosphorous. The phosphate of casein is an important contributor to remarkably high heat stability and calcium- induced coagulation of rennet- altered casein.

5. Casein contains very low sulfur (0.8%) whereas whey protein is relatively rich in sulfur (1%). The principle casein contains only methionine but whey protein contains a significant amount of cystine, cysteine, and methionine. These sulfur- containing amino acids are responsible for many changes in milk on heating.

6. Casein is synthesized only in the mammary gland and no other sources in nature. Some of the whey proteins β lactoglobulin, and α- lactalbumin are synthesized in the mammary gland but bovine serum albumin and immunoglobulin are not synthesized in the mammary gland but derived from blood.

7. The whey protein is dispersed in solution and has a simple quaternary structure. Casein has a complex quaternary structure and exists in milk as large colloidal aggregates.

Introduction

The mammary glands of female mammals secrete milk, a necessary food that is liquid and meets the newborn’s nutritional needs. All mammals consider milk to be a complete food for their newborns. It is considered a necessary food for humans and can be consumed as a product or as liquid milk. It contains almost all essential nutrients except iron, which is very low in milk. In essence, milk is an emulsion of protein and fat in water, supplemented with carbohydrates, vitamins, and minerals.

Definition of Milk

• Milk is a complex biological fluid that differs from species to species in both composition and physical properties. It is the full lacteal secretion of a mammary gland that is obtained by milking mammals for a minimum of 72 h after calving or until the milk is free from colostrum.

• FSSAI defines milk as the normal mammary secretion derived from the complete milking of healthy milch animals. It should be free from colostrum.

From a chemical perspective, milk is a dynamically balanced mixture that comes in different forms such as emulsion, colloidal suspension, and true solution. It also contains varying amounts of proteins, fats, carbohydrates, salts, and water.

Gross Composition of Milk

Milk composition varies among different mammals. The average chemical composition of milk in various species is given in Table 1. Buffalo milk and sheep milk contain higher amounts of fat, while human milk comparatively has the highest lactose content. Human milk has lower protein content as compared to milk of other species.

7.1 Introduction

Water is one of the most essential natural resources of the planet. Water is also the most critical resource for sustainable development in most of the developing countries. The quantities that are needed for drinking and sanitation purpose of humans are relatively small, and much larger quantities of water are required for many other purposes. It is essential not only for agriculture, industry and economic growth of a country, but also it is the most important component of the environment and ecosystem, with significant impact on overall wealth and nature conservation. Agricultural and industrial activities critically depend on a sufficient amount of fresh water that is withdrawn from rivers, lakes and groundwater aquifers. Currently, the rapid growth of world population along with the extension of irrigation dependent agriculture, development of industrial sector and climate change are stressing the quantity and quality of the natural water systems. Due to the increasing problems, human have begun to realize that they can no longer follow “use and discard” methodology either with water resources or any other natural resources. As a result, the need for water management has become evident. Climate change has already started to affect the hydrological cycle and the availability of freshwater for agriculture. So, proper water management practices play crucial roles in the food production and the management of ecosystems. Over the last century global irrigated area has increased more than sixfold from approximately 40 million hectares in 1900 to more than 260 million hectares in 2000. Today more than 40% of the world’s food comes from the irrigated cropland which is 18% of the total cultivated crop land. Irrigated area is increased by almost 1% every year and the demand for irrigation water will increase by 13.6% by 2025 (Jensen, 1993). On the other hand about 8-15% of fresh water supply will be diverted from agricultural sector to meet the increased demand of domestic and industrial use. On the other hand the efficiency of irrigation is very low, only 65% of the applied water is used by the crop (Fig. 1). So, to overcome shortage of irrigation water for agriculture, it is essential to increase the water use efficiency in the crop field and to use marginal water for irrigation.

6.1 Introduction

Water deficit stress is a serious and frequently encountered abiotic stress in the terrestrial surface. Its deleterious effects on plant growth and productivity are well documented. Plant responses to water stress are believed to be complex as these operate at various levels of plant organization. Several in built physiological and biochemical mechanisms provide resistance to plants against stress. An understanding of the processes linked to these mechanisms is vital for optimizing crop growth and productivity under stress. Plants respond and adapt to water stress by altering cellular metabolism, thus invoking stress tolerance. Alteration in endogenous concentrations of growth regulators along with accumulation of osmolytes, modifications in antioxidant cascade, changes in protein profiles and induction of gene expression in plants under stress are important characteristic metabolic changes that invoke stress tolerance at the cellular level. Alteration in endogenous concentrations of plant bio-regulators under stress helps plants through better turgor maintenance and efficient water usage by influencing stomatal functioning, hydraulic conductivity and morphological adaptation. Progress made in plant adaptation to water stress is an outcome of advances made in analytical techniques on endogenous growth regulator analysis and powerful and reliable molecular and genetic techniques.

5.1 Introduction

Out of the many climatic events that influence the earth’s environmental fabric, drought is perhaps the one that is most linked with desertification. Drought is a natural hazard originating from a deficiency of precipitation that results in a water shortage for some activities or some groups and is often associated with other climatic factors (such as high temperatures, high winds and low relative humidity) that can aggravate the severity of the event. Drought differs from aridity in that the latter is restricted to low rainfall regions and is a permanent feature of the climate. Drought occurrences are common in virtually all climatic regimes.

Widespread and severe drought conditions in Asia, Latin America and the Caribbean in 2000 have raised serious concerns about the continuing vulnerability of the world community to extended periods of droughts and water shortages. In 2000, major droughts affected much of south-eastern Europe, the Middle East, and the area through central Asia to northern China. Especially hard hit was Afghanistan, Bulgaria, Iraq and the Islamic Republic of Iran and parts of China. In North America, months of above-average temperature coincided with below-normal precipitation through northern Mexico and much of the southern and western regions of the USA, leading to one of the worst wildfires in the past 50 years.

By August 2001, much of Western Asia, Central Asia, and the Middle East was suffering the third year of a continuing drought that severely reduced many countries’ crop yields. The countries most affected were Afghanistan, India, Islamic Republic of Iran, Pakistan, and Tajikistan.

4.1 Introduction

Water pollution is the contamination of water by an excess amount of a substance that can cause harm to human beings and/or the ecosystem. The level of water pollution depends on the abundance of the pollutant, the ecological impact of the pollutant, and the use of the water. Pollutants are derived from biological, chemical, or physical processes. Although natural processes such as volcanic eruptions or evaporation sometimes can cause water pollution, most pollution is derived from human, land-based activities (Figure 4.2). Water pollutants can move through different water reservoirs, as the water carrying them progresses through stages of the water cycle (Figure 4.1). Water residence time (the average time that a water molecule spends in a water reservoir) is very important to pollution problems because it affects pollution potential. Water in rivers has a relatively short residence time, so pollution usually is there only briefly. Of course, pollution in rivers may simply move to another reservoir, such as the ocean, where it can cause further problems. Groundwater is typically characterized by slow flow and longer residence time, which can make groundwater pollution particularly problematic. Finally, pollution residence time can be much greater than the water residence time because a pollutant may be taken up for a long time within the ecosystem or absorbed onto sediment.

3.1 Introduction

Groundwater constitutes about 89% of the total fresh water resources in the planet. But in recent years, due to over exploitation of ground water and erratic nature of monsoon, there has been depletion of ground water across the world. Depletion of ground water has reached to the extent that it is virtually impossible to get the water table back. Even though there is a possibility of recharge of water from the other areas, the process is very slow and may take one year to replenish one meter. In view of this management of ground water has become one of the most significant issues in recent times. Added to it, there are also environmental problems such as aqua for mining, salt water intrusion, stream base flow reduction etc. For several reasons the efficient management of ground water resources through market mechanism has become difficult. Against this context the present article attempts to analyze the need for sustainable ground water management in India. The article also briefly discusses the concept of sustainable ground water management, factors affecting ground water availability, different approaches towards developing and using available ground water without adversely affecting the hydro geological balance. Further, the paper highlights strategies for sustainable groundwater management, including development of aquifers, rainwater harvesting and artificial recharge methods. The article offers some relevant policy recommendations for sustainable groundwater management in India.

2.1 Introduction

Water is the most precious gift of the nature and it is also the most crucial element for sustainability of the life in the earth. India is the largest user of freshwater in the world. India’s total water consumption alone is the higher than any other continents. The Agricultural sector is the largest consumer of water followed by the domestic sector and the industrial sector. The role of irrigation water as one of the most essential inputs for crop cultivation can’t be denied. As a traditional productive input, it ensures production by acting as an agent of insurance against inadequate and inconsistent monsoon. Ultimately the outcome provides agricultural production stability. Thus, irrigation is of prime importance in cultivation of vegetable crops as it ensures favourable water balance within the root zone in addition to natural precipitation. It fulfils the crop- water demand and improves the crop production and effectiveness of other agricultural inputs. It is also an important limiting factor of crop yield, because of its association with several factors of plant environment, which directly influence the crop growth and development (Yaghi et al., 2013). The various irrigation methods under different system of irrigation differ with regard to extent of control, timeliness and adequacy of supply of irrigation water for crop cultivation. Consequently, the economic benefits and the costs due to these irrigation methods vary among different irrigation systems. The dominant method of irrigation practiced in large parts of the country is surface irrigation (basin, border and furrow) where the entire soil surface is almost f looded without considering the actual consumptive requirements of the crops. Frequent over or under irrigation create the problems of water stress or water logging leading to reduced irrigation efficiency (less than 30%).

1.1 Introduction

Water scarcity is seen as a major constraint to intensify agriculture in a sustainable manner as an attempt to meet the food requirements of a rapidly growing human population. The ever-increasing human population, climate change due to increased emissions of greenhouse gases (GHGs), and intensification of agriculture, are putting severe pressure on the world’s two major non-renewable resources of soil and water, and thus pose a big challenge to produce sufficient food to meet the current food demand. The present world population of 7.3 billion people is predicted to grow to over 9 billion by 2050, with the majority of this population increase occurring in developing countries, most of which already face food shortages. A 70% increase in current agricultural productivity will be required to produce sufficient food if these human population growth predictions prove to be correct. In this context, concerted efforts are being made globally to improve the effectiveness of water which will be used for enhancing the production of irrigated crops. Additionally, efforts are also being made to improve water harvesting and water conservation in rain-fed agriculture.

The injudicious use of saline/brackish water is all too often associated with the development of soil salinity, sodicity, ion toxicity, and groundwater pollution. Because of these negative effects, it is important to have a better understanding of exactly how the quality of water influences the management of irrigated agriculture, especially in arid and semi-arid regions.

Introduction

Agriculture is the backbone of every country. It largely depends on climate and its changes. Over the last few years climate change has affected crops, cropping systems, patterns and the ecosystem hugely. Climate change is caused by greenhouse gases in the atmosphere, which results in global warming (Aydinalp and Cresser, 2008). The rising temperature, melting of glaciers, loss in vegetation cover, frequent occurrences of drought and floods are some of the issues that have raised concern among the environmentalists. The change in temperature and precipitation patterns alters the traditional growing seasons. Climate change is expected to influence crop and livestock production, hydrologic balances, input supplies and other components of agricultural systems (Adams et. al., 1998). Vulnerability of climate change depends on physical, biological and socio-economic characteristics. Low income populations dependent on isolated agricultural systems are particularly vulnerable to hunger and severe hardship. These populations are already barely food-sufficient, even the slightest decline in yields could be very harmful in these areas. The most negative effects are foreseen in dry land areas at lower latitudes and in arid and semi-arid areas, especially for those reliant on rain fed, non-irrigated agriculture (Aydinalp and Cresser, 2008). The rise in temperature cause stress in crops and reduce yields and productivity. Crops that are sensitive to temperature during the growth stages are affected a lot. A shift in growing season is being seen due change in temperature. Irregular and altered patterns of rainfall are severely affecting the crops and water supplies for livestock, which in turn has increased the occurrence of floods and drought, causing soil erosion, disrupting harvesting schedules. Occurrence of new pests and diseases are seen in the places having warmer temperature. Altered temperature has altered the life cycle of pests and intensity of infestations. Rising of sea water level and increased evaporation leads to intrusion of salt water into fresh water making irrigation water more saline harmful to crops. Livestock are sensitive to heat stresses which in turn reduce livestock productivity and increase mortality rates.

Introduction

Climate change may advance more rapidly than anticipated, introducing novel environmental conditions for cultivating horticultural crops. The rise in atmospheric CO2 levels from non-renewable energy sources combustion drives global average temperatures, altering weather patterns worldwide with regional variations (Stocker et al., 2013). Currently, certain regions are already experiencing the effects of extreme weather events such as heat waves or frost, while prolonged droughts pose a growing threat to global food security elsewhere. Climate changes may yield both positive and negative outcomes, but they will undoubtedly alter production conditions and product quality (Kaufmann and Blanke, 2017).

Elevated temperatures can enhance the ability of air to hold water vapor, leading to increased water demand. This process can elevate evapotranspiration rates, potentially depleting soil water reserves and causing water stress in plants during dry periods. Fruit production is particularly vulnerable to water stress, especially in regions where trees lack irrigation. Numerous studies indicate that water stress diminishes crop yields and hastens fruit ripening (Henson, 2008).

Introduction

Climate change is widely acknowledged as the most significant contemporary challenge facing humanity. According to a recent report from the Intergovernmental Panel on Climate Change (IPCC, 2022), the situation has deteriorated further, with 3.3 billion people worldwide highly susceptible to climate change. Current unsustainable development practices are escalating the exposure of ecosystems and populations to climate-related risks. Human activities and their impact on the climate and environment are leading to unprecedented extinctions of animals and plants, resulting in a loss of biodiversity and posing a threat to life on Earth. The diversity of microorganisms is fundamental to maintaining a healthy global ecosystem, as the microbial world serves as the life support system of the biosphere. Although the influence of human activities on microorganisms is less conspicuous and less well understood, a significant concern is that changes in microbial biodiversity and functions will impact the resilience of other organisms, affecting their ability to adapt to climate change. Microorganisms play crucial roles in carbon and nutrient cycling, as well as in the health of animals (including humans), plants, agriculture, and the global food web. Microorganisms inhabit all environments on Earth occupied by larger organisms and are the exclusive life forms in certain environments such as the deep subsurface and extreme habitats. Dating back to the origin of life on Earth at least 3.8 billion years ago, microorganisms are likely to persist well beyond any future extinction events. Despite their vital role in regulating climate change, microorganisms are seldom the focal point of climate change studies and are typically overlooked in policy development. The challenge lies in understanding their intricate role in the ecosystem due to their vast diversity and varied responses to environmental changes.

Introduction

Climate change is a deadliest hazard to life on Earth. Global temperature is rising due to greenhouse gas emissions from the usage of fossil fuels, this result in widespread agricultural and fisheries failure, the extinction of hundreds of thousands of species, and whole towns becoming uninhabitable (Lindwall, 2022). Rising global temperatures are severely killing humans and trees, forcing half of all species to move, worsening water-borne and respiratory ailments in people, and jeopardising millions’ food and water security (Isaacs-Thomas, 2022). Addressing these concerns necessitates a worldwide collaboration to minimise greenhouse gas emissions and promote sustainable behaviours. Climate change affects agriculture production, lowers crop nutritional value, and increases the frequency of extreme weather events. These interruptions jeopardise food production, availability, and access, especially in vulnerable countries. Microbes play an important role in soil health, nitrogen cycling, and ecosystem stability. They impact a variety of soil activities, such as organic matter breakdown, nutrient mobilisation, and plant growth stimulation. However, climate change poses a substantial danger to microbial communities, possibly changing their activities and altering ecosystem dynamics (Wang et al., 2022). Transitioning to a low-carbon economy requires a global effort. Mitigation strategies include enhancing energy efficiency, adopting renewable energy sources, electrifying industrial processes, implementing efficient transportation systems, and introducing carbon taxes or emissions markets.

Introduction

Rising temperature, decreasing precipitation, increased frequency in drought and flooding, etc. is making us realize climate change is not some cooked up story. Still there are people who believes climate change is not real. By definition, Climate change is a long-term shift in global or regional climate patterns. This will affect the life of people in many forms: health, food, water, etc. (Table 1). Agriculture is a highly vulnerable field to such weather and climate changes, they can have significant direct and indirect impacts on farm productivity and profitability. Climate change will have adverse effect on crop physiology, growth and chemistry and thus it will cause negative impact on agricultural production. Because of the variation in climate, moisture availability may change, which limits vegetation activity/plant growth, increase in drought/ heat/flooding will the crop growth and yield. Elevated CO2 does not have a profound effect on C4 plants. On the contrary, tissue nitrogen concentrations are higher for C3 species under increased CO2 . Intergovernmental Panel on Climate Change (IPCC) estimates that climate change and elevated CO2 is expected to increase competitiveness of invasive weed. IPCC also estimates that with 1°C rise in global temperature, 5 to 10 per cent yield reduction of major food and cash crops (Pachauri et al., 2014).

Introduction

The “plant disease triangle” is a fundamental concept in plant pathology that illustrates the interaction between three essential components necessary for the development of a plant disease. Firstly, the host plant which refers to the plant species or cultivar that is susceptible to the pathogen. Host plants provide the necessary environment and resources for the pathogen to establish, grow, and reproduce. Secondly, the pathogen which is any organism (such as fungi, bacteria, viruses, nematodes, or other microorganisms) that can cause disease in plants. Pathogens can infect host plants through various means, including direct contact, airborne spores, soil-borne organisms, or vectors such as insects. And thirdly, the environment which encompasses all external factors that influence the interaction between the host plant and the pathogen. This includes abiotic factors such as temperature, humidity, soil moisture, light, and nutrient availability, as well as biotic factors such as the presence of other organisms (competitors, predators, symbionts) that may affect disease development.

The plant disease triangle illustrates that the occurrence of a disease requires the presence and interaction of all three components: a susceptible host, a virulent pathogen, and a conducive environment. If any of these components is missing or unfavourable, disease development may be inhibited or prevented. Any change in ecosystem can affect plant diseases, because plant disease is the result of interaction between a susceptible host, virulent pathogen and favourable environment. If any of the three factors are altered, the progress of any one disease can change. Although interactions among the three factors must be matched, weather is an important variable due to its dynamic behaviour.

Introduction

The world’s food and nutritional security are under serious threat from climate change. Climate changes have significant effects on agriculture by affecting insect pests, their natural enemies, and pollinators as illustrated in Fig 1 (Eigenbrode and Adhikari, 2023). According to Benedict (2003), 13.6% of annual crop loss worldwide is attributed to insect pest attack. Crops, crop pests, natural enemies and pollinators are directly and indirectly impacted by erratic climate. The continuous and anticipated alterations in these insects vary across species, systems, and geographical areas, impeding the development of strong generalizations and forecasts. Moreover, the implementation of “climate-smart” agricultural methods, may have additional effects on ideal management of these insects.

Direct effects on insect pests

Temperature: The most reliable, well-researched, and easily modelled component of climate change is warming. Warming affects physiology, phenology, dispersal, reproduction, development, and survival of insect pests (Bale et al., 2002) as illustrated in Fig 2 (Skendži? et al., 2021). It can be inferred that increased herbivory would be associated with rising temperatures in many cases. High temperature and high humidity are key reasons for whitefly population increase (Pathania et al., 2020). Warming can alter the number of insect generations in Helicoverpa armigera (Lepidoptera: Noctuidae) in China (Huang and Hao, 2020).

Introduction

Climate change has significant adverse implications on the physiological processes and metabolic machinery of plants, potentially affecting growth, development, and overall crop productivity. The rapid increase in global population exacerbates the threat to global food security, which is further impacted by changing climate conditions. The Intergovernmental Panel on Climate Change (IPCC) estimates that between 1850 and 1900 and 2011 and 2020, the global mean land surface air temperature increased by 1.6 °C. Predictions by the United Nations indicate that the global human population could reach 8.5 billion by 2023 and 9.7 billion by 2050, up from the current 8 billion. The National Centers for Environmental Information (NCEI) reported that 2022 was 0.86°C warmer than the average of the 20th century, making it the 6th warmest year on record. These data suggest an increased probability of unpredictable climate changes and harsh growing conditions, manifesting as various abiotic stresses on major cultivable lands. Climate change impacts CO2 concentration, temperature, precipitation, pollutants, and nutrient availability and uptake, leading to drought, salinity, irregular rainfall, f looding, high temperatures, and nutrient deficiencies in staple food crops, thereby threatening global food security. This review focuses on the effect of elevated CO2 and temperature on fundamental plant metabolic processes such as photosynthesis, respiration, transpiration, and nitrogen metabolism.

Introduction

Climate plays a crucial role in shaping the agricultural landscape of a region, and the changing climatic conditions pose a significant threat to global food security. In developing countries in Asia and Africa, the primary challenges to realizing optimal crop yields are declining soil fertility, particularly soil organic carbon and drought. The unchecked emission of greenhouse gases is expected to lead to a considerable rise in the average global temperature by 6°C in the next century, primarily driven by activities such as fossil burning and urbanization. Over the past centuries, there has been a noticeable increase in the concentration of CO2 and CH4 , with up to a 35% expected rise in nitrous oxide due to the improper use of nitrogenous fertilizers. Climate models predict a substantial impact on agricultural productivity in the 21st century, with rising temperatures and more frequent extreme weather events (NASA, 2022). To maintain agricultural productivity, it is imperative to understand the effects of increasing temperatures, shifting precipitation patterns, and rising CO2 levels on soil health. It is noteworthy that climate is one of the key factors influencing soil formation, alongside four other factors. Temperature and precipitation directly affect soil formation by providing the necessary conditions for weathering and biomass production. The sum of active temperature and precipitation evaporation ratio are critical parameters that determine energy consumption for soil formation, water balances in soil, organic-mineral interactions, and the transformation processes within the soil. However, human activities such as population growth, deforestation, disruption of marine ecosystems, and the greenhouse effect contribute to climate change, leading to denudation, depletion of soil organic matter, destruction of soil structure, erosion, and desertification, ultimately causing a decline in soil health and environmental degradation (IMD, 2021). Despite being a gradual process, climate change, characterized by small, long-term changes in temperature and precipitation, significantly influences various soil processes, particularly those related to soil fertility. The anticipated effects of climate change on soils primarily involve alterations in soil moisture conditions, increased soil temperature, and elevated CO2 levels. Understanding the consequences of climate change on soil health is crucial, as it has far-reaching impacts on agriculture, biodiversity, carbon cycling, and ecosystem resilience in the face of an evolving climate (Nunez et al., 2019).

Introduction

Soil is a silent foundation and a dynamic part of Earth’s complex ecosystem. It sustains life, influences plant growth and is involved in various environmental processes. However, the balance of this vital resource is increasingly threatened by the pervasive effects of climate change, manifested by rising temperatures, changing rainfall patterns and changes in atmospheric conditions. As global temperatures rise and weather patterns change, the relationship between soil and climate poses transformative challenges with far-reaching consequences. This research addresses the complexity of this interaction and examines how climate change affects agriculture, soil health, composition and functionality. Soil health, a holistic concept that includes physical, chemical and biological aspects of soils, is closely linked to climate change. A notable consequence of climate change is the increasing frequency and intensity of extreme weather events such as droughts and floods. These events disrupt the delicate balance of soil ecosystems and lead to erosion, loss of topsoil and reduced fertility. Additionally, increased temperatures contribute to soil moisture depletion, reducing water availability for plants and microorganisms and further compromising soil health. A central issue at the interface between soil science and climate change is the role of soil as a carbon sink. Soils store large amounts of carbon in the form of organic material, thereby influencing the environment.

Introduction

The foundation of agricultural productivity lies in the realm of weather and climate, a reality unaltered by technological progress. The consequences of climate change on agriculture represent a worldwide apprehension, particularly significant for India. Around 54.6% of the Indian population is engaged in agriculture and allied activities, contributing to 17.4% of the country’s total gross value added. The agriculture sector is battling a multitude of challenges, such as increasing food demand, depletion of agricultural lands and water resources, and the devastating effects of climate change. It is high time that we acknowledge and address these issues to safeguard the future of our food systems and ensure food security for all.

Climate change refers to the long-term variations in weather patterns and temperature over extended periods. Climate change occurs when earth’s climate system experiences variations in weather patterns that can last for decades or millions of years. These changes can arise naturally due to phenomena like volcanic eruptions or changes in solar activity. However, since the 1800s, human activities accelerate the natural pace of climate change, primarily due to the combustion of fossil fuels like coal, oil, and gas. These activities release greenhouse gases like carbon dioxide (CO2 ), methane (CH4 ), and nitrous oxide (N2 O) into the atmosphere, trapping heat and leading to a gradual increase in global temperatures. One of the most remarkable characteristics of climate change is the increase in temperature, which is widely referred to as global warming (Houghton, 2009). According to the report of Intergovernmental Panel for Climate Change, the release of greenhouse gases caused by human actions has contributed to around 1.1°C of warming since the period between1850-1900. The report also predicts that the global temperature will likely increase to 1.5°C or more in the next 20 years (IPCC, 2021).

1. Introduction

Sustainability embodies an ecological vision aimed at fostering enduring human coexistence on Earth. Over time, its definition has evolved in literature and context, generating ongoing debate. Generally, experts frame sustainability around three pillars: social, economic, and environmental. While environmental concerns often dominate discussions, sustainability encompasses broader challenges like pollution, land degradation, biodiversity loss, climate change, and ecosystem service decline. This concept influences decision-making globally, politically, and personally.

Sustainable development, often used interchangeably with sustainability, is distinguished by UNESCO as a long-term objective versus the diverse processes and pathways to achieve it. Within the economic dimension, the tension between welfare and environmental preservation is explored through concepts like “weak and strong sustainability,” acknowledging the necessity of trade-offs. Ideal policies would aim to decouple environmental degradation from economic growth.

Environmental sustainability is pursued through various means such as ecosystem preservation, collaborative resource management, reducing food waste, advocating plant-based diets, managing fertility rates to curb population growth, and transitioning away from fossil fuels towards clean energy and innovative green technologies.

Introduction

In the modern corporate landscape, the Glass Ceiling remains an enduring challenge, obstructing the path to leadership positions for qualified individuals based on gender. This study embarks on a comprehensive analysis of the persistent gender discrimination inherent in leadership roles within corporations.

With a primary focus on measurement, analysis, and assessment, the study seeks to quantify the current prevalence of the Glass Ceiling, elucidate the strategies adopted by large corporations in addressing bias, and evaluate the influence of personal factors in accelerating this phenomenon.

Grounded in empirical data and a commitment to factual precision, this research aims to contribute substantially to the ongoing discourse on gender equality in leadership. By revisiting the Glass Ceiling, this paper endeavours to not only shed light on the existing disparities but also provide nuanced insights that can inform corporate policies and societal endeavours to dismantle barriers obstructing the equitable progression of individuals within the professional realm.

1. Introduction

Sustainability embodies an ecological vision aimed at fostering enduring human coexistence on Earth. Over time, its definition has evolved in literature and context, generating ongoing debate. Generally, experts frame sustainability around three pillars: social, economic, and environmental. While environmental concerns often dominate discussions, sustainability encompasses broader challenges like pollution, land degradation, biodiversity loss, climate change, and ecosystem service decline. This concept influences decision-making globally, politically, and personally.

Sustainable development, often used interchangeably with sustainability, is distinguished by UNESCO as a long-term objective versus the diverse processes and pathways to achieve it. Within the economic dimension, the tension between welfare and environmental preservation is explored through concepts like “weak and strong sustainability,” acknowledging the necessity of trade-offs. Ideal policies would aim to decouple environmental degradation from economic growth.

1. Introduction

The Indian government’s New Education policy (NEP 2020) is apositive improvement in this covid-19 scourge. The main NEP for India happened in 1968, trailed by NEPs in 1986 and 2020 under Narendra Modi. India passed the NEP 2020 on July 29, 2020. It tries to reform education and make the countrymoretaught. K Kasturirangan, the previousheadofISRO, led- the NEP 2020 arrangement council. The decision Government of India vowed to modernise Indian schooling in it selection pronouncement (Saha Mushkan, 2020). Educationassumes a fundamental part in building a country; it chooses the nation’s future and its kin’s fate. The effect will be sturdy concerning the development and advancement of the stateandsubject. In this day and age, schooling is urgent. Pre-freedom and post-autonomy periods show the extension and progress Indian Government. It will alter the way India studies; this is the third correction to the instruction strategy. National education policy 2020 plans changes for all gatherings (Kalyani Pawan, 2020).

Introduction

Self Help Group is a voluntary and self managed group of poor people, who come together to promote savings among themselves and pool savings for activities benefiting either individuals or communities economically. Empowerment of women has now become a key issue in the Government’s Five year plans by organizing women into Self Help Groups to make the beginning of a major process of empowering women. 320 million people, out of our 1.1 billion, are steeped in abject poverty and due to their asset lessens it is difficult for them to access any kind of aid from banking / financial institutions and this state of the hopelessness and the constraints of an ineffective credit delivery system can be transcended by enhancing the self esteem and raising the feeling of human self worth. The SHGs approach is a reshaping initiative that enhances the livelihoods and ensures sustainability by enabling poor families to access effective economical and social development leading to empowerment.

In Tripura SHG’s has been introduced in the year 1999.The main objectives of this programme by mutual beneficial of social and economic activities through women mobilization. SHG’s are a way to involve rural women and men actively in the development process by means of increased income Agricultural situation of WTD differs to some extent from the other districts in regard to topography, soil, extent of rain-fall, variation in temperature and humidity which has resulted in difference in cropping pattern also from that of the other three districts. People mainly practice rice and vegetables cultivation. The plain land people also were satisfied to grow single crop preferably paddy without having any knowledge and experience of improved cultivation for growing multiple crops. Animal husbandry is another sector contributing to the economy of WTD. Cattle and poultry are the main livestock wealth of the district. (DRDA office, Agartala, 2010). Many Government and non-government organization now have come forward for helping poor communities and to energize their capacity in development activities of which Self Help Group (SHGs) is thought as the best means for improving their position in the society.

Introduction

India is an agriculture-based country and it contributes most to the economy of the country. Different types of crops are cultivated in a wide range in different ecological regions based on different seasons. So, crop residue is also generated in an extended way by cultivation (Devi et. al 2017). Crop residue is the left over part of the crop after harvesting. In India, crop residue generates around 600 Mt and from which cereals are 70%, fibres 13%, oilseeds 6%, pulses 3%, sugarcane 2%, and others 6% (Jain et al., 2014). Corn production has increased more than 15 times from 1950-51 to 2016-2017. Rice, wheat, millet, barley, and maize are important cereal crops in Uttar Pradesh (Roy and Ahmad, 2015). Traditionally, Crop residue was used as cattle feed, animal bedding, cooking fuel, organic manure, etc. and some residues were used in making handicraft products by rural women. but still, a huge amount of residue is left without management and farmers have no option left except to burn it. About 90 to 140 Mt of crop residue burning in the field or households as fuels (Jain et al., 2014). In the process of harvesting and threshing, residues are left behind in the f ield. Farmers need to clear their fields early for the planting of the next crop so they do have not enough time and it is tough to clear the field at that time. Therefore, the farmers opt for the burning of residue in harvested fields due to a lack of access to user-friendly, cost- and time-effective options. The burning of crop residue creates many issues and effects on the environment and health badly. In a report of NAAS in 2017, it was estimated that in November 2016 at the period of rice residue burning, the NASA satellite images showed the intensity of rice residue burning in Punjab, Haryana, Western Uttar Pradesh, and Uttarakhand was very high. It is doing an additional job of increasing air pollution with vehicles, chimneys, industries, etc. Crop residues release many gases by burning them and these gases are contributing to global warming.

Introduction

After so many decades, the new education policy comes in its new form in 21st century. This policy seeks to offer everyone access to an equal, equitable, and fair education. The NEP 2020 represents a significant advancement in the field of education in India, with an emphasis on primary through higher education. It is based on the idea that education must foster the development of not only higher-order cognitive abilities-such as critical thinking and problem-solving skills-but also social, ethical, and emotional capacities and dispositions. These higher-order cognitive abilities include both the foundational abilities of literacy and numeracy and higher-order cognitive abilities. It includes- recognizing, identifying, and fostering each student’s individual abilities by educating parents and teachers to support a student’s overall growth in both academic and extracurricular areas, by the 3rd grade, all children will possess fundamental skills in literacy and numeracy, it will provide students multidisciplinary and holistic education to ensure the coherence and integrity of all knowledge. The policy manifested 22 guiding concept, some of them are conceptual comprehensive, flexibility and holistic development. These ideas will serve as the foundation for the whole Indian education system (Shamsu, 2021). The New Education Policy 2020 already incorporates vocational training for students’ holistic development, A study demonstrates a positive relationship between vocational choice of the subject and variables of personality, traits, parents’ involvement, achievements, motivation, and occupation information, (Kaur,1992)but including entrepreneurship in this policy would expose our students to more opportunities because entrepreneurship is the process of taking a risk to launch a new business with the intention of making a profit.

Introduction

Enhancing productivity and profitability are two major factors of agricultural growth for the future. Over dependence on monsoon and limited scope for area expansion made agriculture development is critical to generate employment and additional income for the rural poor. Major part of agricultural population is small and marginal farmers who are economically vulnerable and poor. The consequence of inclement weather on crop production affects ultimately livelihoods of farmers. In the changing scenario improvements in farmers’ productivity and profitability, diversification of agriculture have been acknowledged to enhance profit, generate additional employment for rural masses and to conserve the natural resources.

Integration of different component at farm level is the need of hour to enhance the profitability of agriculture production system. Jharkhand state a resource rich state wheremonocroping in rainfed agriculture with small undulated upland is in practice. Rural economy is mixed type where forest produce particularly lac play important role. To enhance rural economy, integration of agriculture with forest based intervention appears to be viable option to enhance profits and productivity of upland which is almost sixty percent of total cultivable land. Even though moisture is available during Rabi free grazing made imperative cultivation of second crop. Continuous aberrant weather demand the inclusion of forest resources to be exploited in diversified and integrated manner as forest interventions require little water.

Introduction

Education as a process of development deals with three majors teaching, training and instruction. Its objective being to help students to achieve their highest potential and individual development which they are capable. Education needs to be tailored meaning to ensure that the information is relevant. Attitude, Knowledge and Skill “each one of them, with its inner components, prepares students to acquire and obtain different characters as means to produce a professional” Yang et al. (2015). Education is a field which is continuously growing from since long and is still growing through a phase of continuous change. To this fast changing world of higher education we need to adapt and adopt the changing environment to meet the circumstances posed by ICT. The educationists and students in particular have witnessed a tremendous change due to the changes brought in by ICT. ICT is what regarded as the efficient management of information, fostering the development of 21st century. The learner in today’s world is so much driven by technology that only traditional method of teaching does not bring satisfaction. Today, ICT is nothing but a blend of both which is yielding and having a good impact on the education scenario. ICT applications are undoubtedly improving the education system in all aspects. Escueta et al. (2017) the educational landscape has been indelibly altered over the past two decades by technological innovation.

Introduction

Pedagogy in higher education is often referred to as activities of educating, instructing or teaching to impart knowledge and skills (Diaz, 2013). With the onset of the Covid-19 pandemic in the year 2020, instructors worldwide faced a challenge in maintaining the teaching pedagogy suited to the online teaching environments. Many instructors with no prior experience teaching online started developing new approaches to solve the challenges in a changing landscape. The main challenges to solve was concerning creating favourable learning experiences, creating engaging classroom experiences, and meeting the expectations of all the students in the online environment (Teachonline, 2020). The internet has provided a wide range of opportunities, leading to uninterrupted education through various conferencing platforms. Since the year 2000, the proliferation of Web 2.0 was tested in the field of education with several tools such as blogs, wiki articles and use of social media channels. Web 2.0 provided increasing scope to the teachers and students to create, edit and share content which is appealing to the learners. Currently, we have entered the Web 3.0 era in which the technologies can be customized to enhance the learning environment for better facilitation of learning needs.