eChapters

19.1 Introduction

The combination of two separate processes whereby water is lost on the one hand from the soil surface by evaporation and on the other hand from the tree by transpiration is referred to as evapotranspiration (ET).

19.2 Evaporation

Evaporation is the process whereby liquid water is converted into water vapour (vaporization) and removed from the evaporating surface (vapour removal). Water evaporates from a variety of surfaces, such as lakes, rivers, pavements, soils and wet vegetation. (Penman, 1963).

Energy is required to change the state of the molecules of water from liquid to vapour. Direct solar radiation and, to a lesser extent, the ambient temperature of the air provide this energy. The driving force to remove water vapour from the evaporating surface is the difference between the water vapour pressure at the evaporating surface and that of the surrounding atmosphere. As evaporation proceeds, the surrounding air becomes gradually saturated and the process will slow down and might stop if the wet air is not transferred to the atmosphere. The replacement of the saturated air with drier air depends greatly on wind speed. Hence, solar radiation, air temperature, air humidity and wind speed are climatological parameters to consider when assessing the evaporation process.

Where the evaporating surface is the soil surface, the degree of shading of the tree canopy and the amount of water available at the evaporating surface are other factors that affect the evaporation process. Frequent rains, irrigation and water transported upwards in a soil from a shallow water table wet the soil surface. Where the soil is able to supply water fast enough to satisfy the evaporation demand, the evaporation from the soil is determined only by the meteorological conditions. However, where the interval between rains and irrigation becomes large and the ability of the soil to conduct moisture to pear the surface is small, the water content in the topsoil drops and the soil surface dries out. Under these circumstances the limited availability of water exerts a controlling influence on soil evaporation. In the absence of any supply of water to the soil surface, evaporation decreases rapidly and may cease almost completely within a few days.

The state of Odisha located in the Coromondal coast of India has a tropical monsoon climate characterized by high humidity, high rainfall (1497 mm) and short and medium winter. It is the 10^th largest and 11th most populous state accounting about 5% of the geographical area and 4% of the population of the country. The geographical area of the state is 15.57 m ha, out of which 0.62 m ha is arable land. Agriculture contributes 28% to  state domestic production and employs 64% of the work force.

A. Diseases

1. Bacterial leaf blight

Occurrence & severity status

The disease Bacterial leaf blight, also known as ‘Bacterial leaf spot’, occurs on white jute (Corchorus capsularis) and tossa jute (C. olitorius) in seed crops of jute at the ICARCRIJAF research farm, Barrackpore, West Bengal, India (Biswas et al., 2013, 2014), in Formosa (Elliott, 1951) and Sudan (Sabet, 1957). The incidence of the disease varies from 25% (Borker and Yamlembam, 2017).

Symptoms

The disease initially appears on leaves as small brown circular spots of 25mm diameter (in tossa jute) or angular brown spots (in white jute), In most cases, the spots are surrounded by a yellow halo and the angular spots coalesce at later stage show larger blighted areas on lamina (Borker and Yamlembam, 2017). The lesions on the stems are elongated; sometimes the spots girdle the stem. The disease on the capsules produces small sunken brown spots. Defoliation and death of the plants may result in severe infections. In the later stages of disease, brown sunken spots were found on the green capsules (Sabet, 1957; Biswas et al., 2013, 2014).

Definition
Fungi are eukaryotic, spore bearing, achlorophyllus, heterotrophic and thallophytic plants with varied forms and habitats, representing heterothallic or homothallic types of sexuality with characteristic sexual and /or asexual means of reproduction without tissue differentiation.
General Characteristics of Fungi
1. Thallus
The body of the fungus is called as Thallus, which is without stem, root and leaves. It may be Plasmodial, Pseudoplasmodial , Pseudomycelial or Mycelial. A single thread like filament is called as hypha. A hypha is made up of a thin, transparent tabular wall filled or lined with a layer of protoplasm.

A group of hypha constituting the body of fungus is called as mycelium may be septate or aseptate. i.e coenocytic.
(a) Coenocytic or Nonseptate or Aseptate Mycelium: When mycelium is not divided by cross walls called as Coenocytic mycelium. Depending upon the nature of parasitism with the host plant, mycelium is either ecotophytic or endophytic.
b) Septate Mycelium: When mycelium is divided by cross walls or septa called as septate mycelium.

Morphology based nematode taxonomy and biodiversity studies have historically challenged most biologists. In the past few decades, there have been efforts to integrate molecular methods and digital 3D image-capturing technology in nematode taxonomy, the former to enhance the accuracy of identification of such a taxonomically challenging group and the latter to communicate morphological data. While the employment of these two methods is growing in recent taxonomic, biodiversity and biogeographic studies, a movement to abandon traditional phenotypic identification methods altogether has emerged (Eyualem Abebe et al?, 2011). Proponents try to justify this trend by citing the challenging gap between the high estimated number of undescribed species and the limited ability of traditional taxonomy to accomplish the task of documenting such diversity.

Fruits, the vivid and delightful offerings of the nature, undergo remarkable transformations as they travel from the orchard to our dining tables. These changes indicate the significance of post-harvest physiology, which is the scientific study that reveals the secrets of how fruits behave after they are picked, including the mechanisms that affect fruit quality and how long it may be stored. The next section provides definitions of the various stages and key players involved in the processes of fruit maturity, ripening, and post harvest physiology. These topics will be further explored in the subsequent sub-sections of this chapter.

Fruit developmental physiology

The life cycle of horticultural commodities (fruits and vegetables) can be effectively categorized into three primary physiological stages after fruit set or initiation, namely growth, maturation, and senescence. Still, a lack of obvious differentiation exists among the several stages. Growth encompasses the process of cell division followed by cell enlargement, which determines the ultimate size of the product. Maturation typically begins prior to the cessation of growth and involves various activities across different commodities. The stages of growth and maturity are commonly denoted as the developmental phase. Senescence can be described as the phase in which anabolic biochemical processes transition into catabolic processes, resulting in the ageing and eventual demise of the tissue. Ripening, a term specifically used for fruit, is typically regarded as the initial phase of senescence that occurs during the later phases of development. Defining the transition from growth to senescence is rather straightforward.

11.1 Introduction

Fermented foods are the result of the activity of a few specialized types of micro-organisms among the thousands of species known to mankind. Success of such processes is depended upon the control of environmental conditions ensuring the growth of the desired microbial species and inhibition of others. The fermentation can be broadly defined as the process in which the carbohydrate or like compounds are broken down, under anaerobic or aerobic conditions [171]. The basic role of micro-organisms is to breakdown the organic compounds to get energy for their metabolic activities. From ancient times, people all over the world have developed traditional processes for production of alcoholic beverages (wine) either from natural sugar such as in wine or by degrading the starchy materials (beer). Fruit wines referred to as ‘Soma’ in our ancient scriptures have been part of food of man and were used as medicine, might have originated accidentally (transformation of fruit juice beverages having exhilarating or stimulating properties). Wines are made principally from fruits like grape or extract of other fruits of various types (table wine, sparkling wine, dessert, aperitif or vermouth and pop wines) while the beers are prepared from grains like barley, rice and corn. The principal carbohydrate in grain is starch which can not be fermented directly. This process is brought about by starch splitting enzymes by germinating the grains followed by drying and storage until needed. Distillation of beer produces a variety of liquors (whisky, rum, gin, vodka), while that of wine produces the brandy. Besides, the improvement in the raw material selection, fermentation conditions and techniques, a lot of waste material is generated during fermentation process in the industries. Nevertheless, the food based industries are significant contributors to the economy of the many countries of the world (Fig 1). The global market value of food fermentation based industries is estimated to be around 250 million US dollars. Interestingly, more than 10% of this accounts for alcoholic beverages (Fig 2) with projected increase of US$ 27 billions in 1989 to 40 billions in 1990 [93,123,123,129].

IKS stands for Indigenous Knowledge Systems. When applied to pest and disease management in agriculture, IKS refers to the traditional and local knowledge systems developed by communities over generations to deal with agricultural challenges, including pests and diseases.

5.1 Key Aspects of IKS for Pest and Disease Management

1. Traditional Practices: Indigenous communities often have developed practices based on observation and experience to control pests and diseases. These may include specific plant combinations, crop rotations, or timing of planting to minimize pest damage.

2. Natural Remedies: IKS often includes knowledge of natural substances and plants that have pesticidal or medicinal properties. Examples include the use of neem, garlic, chilli, or certain plant extracts to deter pests or control diseases.

3. Cultural Practices: Traditional farming practices may include rituals or timing of activities that are believed to influence pest and disease outbreaks. For instance, planting during specific lunar phases or following certain cultural calendars.

4. Biological Control: Indigenous knowledge may also involve the use of natural enemies of pests, such as predators or parasites, to manage pest populations. This aligns with modern biological control principles.

5. Crop Diversity: Traditional farming systems often promote crop diversity, which can help naturally manage pest and disease pressures by reducing monoculture effects and providing habitats for beneficial organisms.

Nanotechnologies are being spoken of as the driving force behind the new industrial revolution. The mass production of these nano materials and their applications mean a dramatic increase of workers dealing with Engineered Nano Materials (ENM) and becoming possibly exposed to resulting hazardous effects and increased environmental burden of the environment due to the leaks of these materials from industrial processes. It is, hence, essential to consider the importance of ENM safety and their new applications and understand that it is important for these materials and products to be safe to enable successful promotion of nanotechnology for useful applications (Eman M Osman, 2019). 

Electrophoresis

The mobility of ions in an electric field is the basis for the separation method known as electrophoresis. Ions that are negatively charged move toward a positive electrode, while those that are positively charged move toward a negative electrode. Usually, one electrode is biased either positively or negatively, and the other is at the ground for safety reasons. Ions can be distinguished from one another based on their size, shape, and overall charge, which determine their migration rates.

Poly Acrylamide Gel Electrophoresis (PAGE)

Introduction

Electrophoresis is an electrochemical process in which substances with a net electric charge migrate under the influence of an electric current. This migration occurs in an agar gel or a liquid- filled buffered matrix such as cellulose acetate. Positively charged substances travel toward the cathode (negative electrode), while negatively charged substances go toward the anode (positive electrode). Different substances move at different rates depending on their charge. This movement is called electrophoretic mobility.

Proteins are charged molecules. They have a positive as well as a negative charge. Among proteins, particularly caseins, they have different contents. The charge density also varies depending on the molecular weight. Proteins have a net negative charge at a pH above 4.6, and hence they move towards the anode (positive electrode) when subjected to an electric field under alkaline conditions. Due to differences in the charge of individual protein fractions, their migration rates also differ and are hence separated into distinct bands. These bands are stained with the dye amido- black, destained with 7% acetic acid, and observed for the electrophoretic pattern.

Introduction to Research

Research is an inseparable part of human knowledge. Its role in human life is as precious as that of salt in a vegetable. The life would lose its taste without research exactly in the same manner as a vegetable without salt. The modern academics just cannot stand and meet the aspirations of a matured society, if it does not provide for research and investigation. “The obvious function of research is to add new knowledge to the existing store. but its power for cleansing our minds of clinches and removing the rubbish of inapplicable theory is equally notable. Scientific research is a cumulative process. It is also a projective process, especially in the social sciences. Understanding can be (advanced) not only by gains in knowledge but also by discarding outworn assumptions”.

Drought is a recurrent feature of climate or climatic anomaly or weather related natural disaster. It occurs when the precipitation remains deficient over an extended period of time, usually for a season or more and affects water shortage in water bodies, streams, soil moisture, ground water etc. resulting into low crop production and economic performance of large regions or entire country. Drought occurs in virtually all regions varying its severity, low and high from regions to regions.

Increasing population, declining natural resources, changing climate and political stability are the major threat to our food, nutritional as well as environmental security. It is expected that India’s population will boom to 1.5 billion by 2030 and to feed them we need approximately 341mt food grain including 315 mt cereals and 26mt pulses) (Kumar et al., 2016).

Agriculture remains the primary livelihood for much of South Asia, underpinning food security, rural incomes, and economic stability. Despite its pivotal role, the sector has historically been constrained by low productivity, fragmented supply chains, significant post-harvest losses, and limited access to markets and institutional finance (FAO, 2023).Over the last decade, a rapid expansion of technology-driven agritech startups across South Asia- particularly in India- has sought to address these systemic gaps. By deploying artificial intelligence (AI), the Internet of Things (IoT), machine learning (ML), blockchain, drones, and renewable energy, these enterprises are reshaping agricultural value chains, enhancing resilience, and creating measurable socio-economic impact. Following are some of the promising areas where startups have shaped rural economies

Importance

It is one of the most valuable primary products in world trade, in many years second in value only to oil as a source of foreign exchange to producing countries. Its cultivation, processing, trading, transportation and marketing provide employment for hundreds of millions of people worldwide. Coffee is crucial to the economies and politics of many developing countries; for many of the world’s Least Developed Countries, exports of coffee account for more than 50 percent of their foreign exchange earnings. Coffee is a traded commodity on major futures and commodity exchanges, most importantly in London and New York.

Introduction 
Chapter 16, “Global Warming and Food Security” delves into the intricate relationship between global warming and food security. The chapter opens by defining the multifaceted concept of food security, which includes availability, access, utilization, and stability. It emphasizes the critical importance of these components in ensuring a stable and reliable food supply. The chapter then explores various challenges to food security, highlighting the impact of rapid population growth, climate change, land and water scarcity, poverty, inequality, and conflicts. It underscores how these challenges are compounded by global warming, which exacerbates environmental stressors such as rising temperatures, altered weather patterns, and extreme weather events. The implications for agriculture are profound, affecting crop yields, livestock health, and overall food production. The section on the causes and consequences of global warming outlines key phenomena such as risi ng temperatures, changing weather patterns, melting glaciers, and ocean acidification. It illustrates how these factors disrupt agricultural systems and food distribution networks, leading to increased food insecurity. To address these issues, the chapter discusses various strategies for enhancing food security in a changing climate. These include adopting climate-smart agricultural practices, diversifying crop and livestock systems, developing climateresilient crop varieties, and implementing efficient water management strategies. It also highlights the importance of policy and institutional interventions, supportive measures for smallholder farmers, and research and development initiatives. The chapter concludes with a discussion on the need for collaboration and partnerships among various stakeholders, including governments, international organizations, and the private sector, to effectively address the dual challenges of global warming and food security. Global warming, a consequence of human-induced climate change, has emerged as one of the most pressing challenges of our time. As the Earth’s average temperature continues to rise, it brings about far-reaching impacts that extend to various sectors, including food and agriculture. The intricate relationship between global warming and agriculture is of paramount importance, as agricultural systems are both vulnerable to climate change and significant contributors to greenhouse gas emissions. Understanding the impacts of global warming on

    1.    Fortification of common salt is done with 
        a)    Potassium iodide    b)    Potassium iodate
        c)    Both a & b    d)    None
    2.    Vinegar is a 
        a)    Class-I preservative    b)    Class-II preservative
        c)    Natural preservative    d)    a & c
    3.    As per FSSAI regulations, the permitted level of Sulphur dioxide in RTS beverages is not more than ______ ppm
        a)    100    b)    70
        c)    150    d)    80
    4.    Sodium nitrite is a
        a)    Preservative    b)    Buffering agent
        c)    Curing agent    d)    Flavour enhancer

Chapter Overview

This chapter discusses the crucial concept of gender sensitization in the context of livestock production. Gender sensitization involves raising awareness about gender equality concerns, challenging stereotypes, and promoting equitable practices in the livestock sector. The chapter covers the stages of gender sensitization, offers guidelines for veterinarians and veterinary students, provides real-world examples, outlines a sensitization strategy, and underscores the pressing need for gender sensitization in livestock production.

The stresses, drought, salinity, chemicals, cold and hot temperatures, have interconnected effects on plants, resulting in the disruption of protein homeostasis. Maintenance of proteins in their functional native conformations and preventing aggregation of non-native proteins are important for cell survival under stress. The heat shock proteins buffer this environmental variation and are therefore important factors for the maintenance of homeostasis across environmental regimes. Heat shock proteins are known to be expressed in plants experiencing high-temperature stress. Heat shock proteins are important in relation to stress resistance and adaptation to the environment. Their molecular function might be membrane or protein stabilization, but, for now, for most heat shock proteins the molecular function remains to be elucidated. The general observation of the response and induction of heat shock proteins following heat stress suggests that they play a fundamental role in cellular homeostasis. It is possible that heat shock proteins may be involved with the phenomenon of acquired thermotolerance. Heat stress disturbs cellular homeostasis and can lead to severe retardation in growth and development, and even death. Temperature stress can have also a devastating effect on both the plant anabolism and catabolism, initially acting on protein complexes, being the quaternary structure the first folding that is lost during heat stress or heating. Understanding the role of HSPs in relation to stress resistance in a more applied perspective as a potential indicator of stress is important. New technological developments make it possible to investigate the role of genes coding for heat shock proteins in greater detail. A combination of genomics and proteonomics will further elucidate the effects of stress on expression patterns at the DNA, RNA and protein level.

Meaning of Market Energy Strategy

Market Entry Strategy

When an organization has made a decision to enter an overseas market, there are a variety of options open to it. These options vary with cost, risk and the degree of control which can be exercised over them. The simplest form of entry strategy is exporting using either a direct or indirect method such as an agent, in the case of the former, or counter trade, in the case of the latter. More complex forms include truly global operations which may involve joint ventures, or export processing zones. Having decided on the form of export strategy, decisions have to be made on the specific channels. Many agricultural products of a row or commodity nature use agents, distributors or involve Government, whereas processed materials, whilst not excluding these, rely more heavily on more sophisticated forms of access.