eChapters

Introduction
Makkhan (Makhan) is an indigenous(desi) butter obtained by hand churning of dahi using wooden beater (mathani). It is traditional unsalted butter characterized by its delectable and rich flavour. It is white in colour with slightly greenish tinge and has typical soft body and a smooth grainy texture with pleasant aroma. This product has been extensively used for dietary and religious practices since vedic times. The entire quantity produced forms an intermediate product for preparation of ghee (clarified butter fat). Nearly 30% of the total milk production goes for desi butter manufacture. The average yield of the product is very low ranging from 5.5-7.0% for every 100 kg milk used for the purpose. The chemical composition of the product is variable depending upon the method of manufacture. It is difficult to achieve the uniform standard of 20% moisture in the final product due to limitations in the technique adopted for its manufacture. The non fatty solids and lactic acid are derived from the method of preparation and preservation. Higher non fatty solids in makhan indicates use of self soured milk, while a high lactic acid content indicates prolonged storage and in sanitary conditions of manufacture.

Definition

It is one of the important portion of milk which forms a fatty layer on top of milk when left un-disturbed. It is a prime component of milk and comprises mainly of milk fat. It may be defined as “that portion of milk which is rich in milk fat” meaning portion of milk into which larger portion of milk fat has been gathered.  According to FSSAI, 2011 Malai and Cream are defined as –

Malai means the product rich in butter fat prepared by boiling and cooling cow or buffalo milk or a combination thereof. It shall contain not less than 25.0 per cent milk fat.

Several centuries ago, perhaps as early as 6000-8000 BC, ancient man learned to domesticate species of animals for obtaining milk for their consumption. These included cows, buffaloes, sheep, goats, and camels, all of which are still used in various parts of the world for the production of milk for human use. The significance of milk as the most wholesome single food available in nature has never been debated. It is as ancient as mankind itself. The role and consumption pattern of milk in the traditional diet varies widely in different regions of the world. The tropical countries have not been traditional milk consumers, whereas in Europe (especially Scandinavia) and North America, milk and milk products have been traditional parts of the diet.

A. Write True or False
    1.    Bulk density is the true density of the soil.
    2.    Igneous rocks are acidic in nature.
    3.    Adhesion is the attraction of like molecules.
    4.    pH is the negative logarithm of Hydrogen ion concentration.
    5.    Limestone is a sedimentary rocks.
    6.    Size of the gravel is more than 2mm.
    7.    Black and dark colour of soil is due to organic matter and iron.
    8.    Soil moisture tension at Permanent wilting point corresponds to 15 atm. 
    9.    Micropores are the large pores present in the soil.
    10.    Oxidation is the removal of oxygen from the minerals.
    11.    Straight fertilizer contains only one nutrient.

Out of 143 million hectares of net cropped area, about 75% is rainfed which contribute about 45% of food grains. These areas produce 55% rice, 25% wheat, 91% coarse cereals, 75% of pulses, 81% oilseeds and 69% cotton. More than 90% of sorghum, millet, groundnut and pulses is contributed from arid and semi-arid. The term rainfed farming (Dry farming) and dry land farming may be defined as conditions where rainwater is the only source of moisture for survival and growth of crops.

Water is indispensable for human, animal and plant life. Water is essential part of protoplasm. It is essential for photosynthesis. About 400 to 500 litres of water is necessary for the production of  a kilo of plant dry matter.
 
Irrigation

It is the human manipulation of hydrological cycle to improve crop production and quality and to decrease the economic effects of drought. Israelsen and Hansen (1962) defined irrigation as the artificial application of water for the purpose of supplying moisture to plant growth.

Plant requires food or nutrients or elements for its growth and development which are absorbed through soil. Adequate supply of plant nutrients is important to ensure efficient crop production. Plant nutrients are essentially applied through manures and fertilizers. Application of manures and fertilizers to the soil is one of the important factors which help in increasing the crop yield and to maintain the soil fertility. 
Manures
Manures are plant and animal wastes that are used as source of plant nutrients. They release nutrient after their decomposition. These are relatively bulky materials, such as animal or green manures, which are added mainly to improve the physical condition of the soil, to replenish and keep up its humus status, to maintain the optimum conditions for the activities of soil micro-organisms and make good a small part of the plant nutrients removed by crops or otherwise lost through leaching and soil erosion.

Plant Nutrition

The term “fertility” refers to the inherent capacity of a soil to supply nutrients to plants in adequate amounts and in suitable proportions. Nutrition in plants may thus be defined as a process of synthesis of food, its breakdown and utilisation for various functions in the body. There are two types of nutrition:

1. Autotrophic nutrition: It is a type of nutrition in which the living organisms manufacture their own organic food from simple inorganic raw materials. The green plants exhibit autotrophic mode of nutrition and hence called the autotrophs.
 
2. Heterotrophic nutrition: Certain non green organisms like fungi and many bacteria fail to synthesize their own organic nutrients from inorganic substances.  These organisms are thus dependent on some other external sources for their  nutrition. Such plants are called heterotrophic plants and the mode of nutrition is called heterotrophic nutrition.

The problem soils are those which, due to its land or soil characteristics, cannot be economically used for the cultivation of crops without adopting proper reclamation measures. 
Classification of  Problem Soils:  The problem soils are divided into 3 groups. 
    ·    Highly Eroded Soils 
    ·    Saline and Alkali Soils 
    ·    Acid Soils 
Highly Eroded Soils
These soils are called ‘Usar’ in U.P., ‘Kallar or Thur’ in Punjab and ‘Luni’ in Rajasthan. In India, area under saline alkali soils is 7.0 mha. When the chloride (Cl), sulphate (SO₄^2-), carbonate (CO^₃2-) and bicarbonate(HCO₃-) salts of sodium (Na⁺), calcium (Ca²⁺) and magnesium (Mg²⁺) are increased in the soil, the soil become saline and alkaline. On the basis of amount of soluble salts, average quantity of exchangeable Na and pH, they are classified into 3 groups

Soil  and its Components
Soil
Soil is a three dimensional, transferable natural material which is found on the earth crust and provides natural medium to plant growth. OR
Soil is the upper most loose layer of the earth, suitable for plant growth. 
Different scientists defined ‘SOIL’ in different ways:
Buckman and  Brady defined soil as  “A dynamic natural body on the surface of the earth in which plants grow, composed of mineral and organic materials and living forms”.

What is Crop?
Crop refers to plants sown and harvested by man for economic purposes. 
Cropping Seasons: There are three main seasons and two sub seasons.
1. Rainy or Kharif Season – Main characteristics of the Kharif season are 
    ·    It starts from June and spreads to September.
    ·    There is high temperature and high humidity.
    ·    More than 2/3^rd of annual rainfall is received in a year.
    ·    In the beginning, days are longer than nights while days and nights are equal when season ends. 
    ·    Important crops grown are maize, rice, sorghum, Moong, Urd, groundnut, cowpea, soybean etc. 

Agriculture is a branch of Applied science. It is the main enterprise in the world. In a true sense, it is a productive unit where the gift of nature i.e. land, light, air, temperature, water, humidity etc. are integrated into a single primary unit – crop plants and their usable parts are thus indispensable for human beings. Secondary productive units are animals (livestock), birds, insects etc. and they  feed on these primary units and provide more solid products such as meat, milk, wool, eggs, honey, silk, leather etc.
The word agriculture is derived from two Latin words i.e. Ager/Agric means soil and cultura means cultivation. Thus, “Agriculture is a science of cultivation of land”. It is an art and science both in which we study all the activities of human beings related to use of soil. 

When a variety is grown under different environmental conditions, phenotype is the result of genotype+environment+genotype×environment interaction. Genotype×environment refers to the interaction effect of the genotype with different environments. Presence of this interaction leads to overestimation of genetical and biometrical parameters and thus may yield misleading results. This interaction also influences the varietal adaptation of new improved genotypes. Adaptation refers to certain varietal features (morphological and physiological) which promote survival under that environment. In production and breeding programmes adaptability is related to economic yield i.e. genotypes producing higher economic yield under different environmental conditions are comparatively more adaptive than those which produce low yield. Varietal adaptability refers to the capability of a genotype to grow normally and perform well in an environment or different environments. Adaptation of genotypes depends upon certain characters i.e. both morphological and physiological which promote survival under an environment. In natural conditions adaptation is brought by natural selection, but in artificial breeding, adaptation is induced by the breeders.

Hybridization is a potent technique to create variability for selection and breaking yield barriers, evolve varieties having built in high potential. The selection of suitable parents for hybridization is one of the most important step in hybridization program. Selection of parents on the basis of phenotypic performance alone is not a sound procedure since phenotypically superior lines may yield poor recombinations in the segregating generations. It is therefore essential that parents are chosen on the basis of their genetic value. Some of the commonly utilized techniques for assessing the genetic value of a genotype are:

Selection is an important activity in all the breeding programmes. Different types of selections i.e. mass selection, progeny selection and cyclic selection etc. are used depending on the mode of pollination of the crop species, the predominant gene action and the breeding objectives. The efficiency of selection largely depends on the extent of genetic variability present in the population and the heritability of the character. Selection is more effective for character with high heritability than those having low heritability. Breeding for higher or better yield is the breeding objective for most of the breeding programmes, but it has low heritability. Yield is considered to be complex or super character which is influenced by many components or contributing traits both in positive and in negative directions. Due to the fact that it has low heritability, selection is done for the yield contributing traits so that yield may be increased through selection. Prior to selection for yield contributing traits, it is always beneficial to study the extent and type of relationship between the character and yield. There are different procedures which aid in the isolation of superior yielding genotypes from genetically variable populations by providing information on indirect selection for yield. These methods are discussed in the following content.

Important breeding methods can be classified as follows:
    1.    Introduction
    2.    Selection
    a.    Mass selection: Done in self pollinated crops, cross pollinated crops and dioecious crops.
    b.    Individual plant selection: Done in self pollinated crops, cross pollinated crops (line breeding) without control of pollination, artificially self pollinated lines, dioecious plants and clonally propagated lines.
    3.    Hybridization
    a.    Crossing in self pollinated crops.
    b.    Single crosses, double crosses and synthesized varieties.
    c.    Varietal crosses.

Availability of genetic variability and exploitation of this variability are two basic requirements of successful crop breeding programmes. The presence of genetic variation in a character is a must for any improvement in that character. If all the individuals in a population are identical i.e. no variation is there, selection cannot be done, so no improvement will be done. In case of crops, if variation is not present or variation is very small, variations are created through hybridization, mutation, polyploidy etc. Selection is identification and isolation of desirable plants from a variable population. A population consists of large number of heterogenous individuals with different morphological expressions. This variability is contributed by three factors: 1. Genetic constitution of individual, 2. Environmental effect on the individual and 3. Interaction effect between gene and environment. These three factors contribute towards the phenotypic variability among the individuals of the population. Assessment of magnitude of variability present in a crop species is of utmost importance as it provides the evidence for effective selection. Phenotypic variation in a population arises due to genotypic and environmental effects.

Statistics involves procedures for collection, classification, analysis, interpretation and presentation of numerical data (Gupta, 1997). Statistical investigations involves four stages ie. collection of data, compilation of data, analysis of data and drawing inferences. For any statistical analysis, first step is data collection which constitutes the foundation for statistical analysis. The required data may be obtained either through survey or an experiment. Survey is the process of collecting data from a population but have no control over the factors which may affect the population characteristics under study, whereas in experiment, data is collected while control is exercised over the factors which may affect the population characteristics under study. Experiments always and almost provide better information than the survey but surveys are necessary in natural populations. When data is not available, it is collected by any of the two methods i.e. census or survey method. In census method, data are collected for each and every unit of the population whereas in sample method a representative sample is drawn from the population on the basis of which all the conclusions are drawn about the population from that sample.

Years ago before becoming the food producers, humans, for years remained food gatherers and the food collected from wild was sufficient to satisfy the food needs of human on the earth. The ever increasing population demanded more food to quench their hunger which is mainly served by plants but plants have limited intrinsic potential or threshold limit upto which it can put on biomass which ultimately could be consumed as food. Though by making certain modifications in the genetic make-up of the plant, the output can be altered. Before attempting any modification in the genetic make-up, it is necessary to understand the genetics and genetic behavior of the targeted plant. So the aim of studying the genetics and genetic behavior of the plants is to improve the quality and quantity of the produce. The inferences of genetics cannot be directly applied to the improvement but the principles of genetics and the genetic behaviors are set into particular situations. This part of genetics which deals with the improvement of the quality and quantity of the produce with the aim of benefitting mankind is called plant breeding.

Ajowan is a profusely branched winter annual herb, seed oil of which is a major source of thymol, being present to extent of 35-60%. Ajowan oil is aromatic, stimulant and carminative.  It possesses antimicrobial activity. Ajowan seeds are employed either alone or in combination with spices and condiments. It is used in pickles, confectionery and beverages.  It is a good remedy for indigestion.  A paste of crushed fruit is applied externally for relieving colic pains.  It is also used in lotions and ointments.