eChapters

Introduction

One of the triumphs of modern agriculture is the increase achieved in the productiveness of land, measured by yield of crops per hectare or per acre. This has enabled the earth to support a much greater population than would have been possible in past centuries. The increased productivity of the land is a result of scientific and technological progress in plant breeding, in control of pests and weeds, in irrigation and in fertilizers to supplement natural reserves of plant foods. But this progress makes it more difficult to fulfill one specific requirement of many crops: pollination. Pollination of flowers is an essential step in the sexual reproduction of angiosperms. Most angiosperm species rely on insects or other animals, rather than wind, for transfer of pollen among individual plants. The pollinators in turn benefit by obtaining floral resources such as nectar or pollen. Pollination is not only mutually beneficial to the interacting plants and animals, but also serves humanity directly through the yield of many crops, and indirectly by contributing to the healthy functioning of unmanaged terrestrial ecosystems (Costanza et al.,1997; Nabhan and Buchmann, 1997; Klein et al., 2007; Abrol, 2007 and 2008).

Introduction

With the introduction of chemical pesticides in India during 1947 when 250 tonnes of DDT was imported for Malaria eradication programme, there is a steady increase in consumption and at present about 25 per cent of the cropped area is covered by pesticides. Their use has helped in increasing the productivity over the years. The consumption pattern of different groups of insecticides has indicated the same trend. The Indian pesticide industry with 85,000 MT of production in is ranked second in Asia (behind China) and twelfth globally. The Indian pesticides industry is dominated by insecticides where herbicides and fungicides are the key segments globally. Among the pesticides, insecticides account for 57 per cent, fungicide 28.7 per cent and herbicides 14.0 per cent during the year ending 1997-98. Owing to the ban of highly persistent organochlorine pesticides, there is decrease in the trend. Among the different crops, cotton consumes 44.5 per cent of the pesticide worth of Rs.2462.13 millions, even though it occupies only 5 per cent of the cropped area. Cotton is followed by rice (22.00% of pesticides) and other crops.

Introduction

Huge population in the developing countries requires increased amounts of food and fiber from a shrinking agricultural land base. Intensification of agriculture through expansion of irrigation facilities, introduction of high yielding varieties and application of increased amounts of agrochemicals has been in progress. Besides, the cultural practices like spacing, crop rotations, sowing times and tillage methods have been modified to achieve maximum productively per unit time from the available land. However, along with various technological achievements, sever outbreaks of insect pests, diseases and weeds in agricultural crops have also occurred. Many hitherto unknown species have assumed serious status and some of the serious pests have developed resistance to one or more groups of pesticides. In addition, pesticides have contaminated different components of our environment and pose a potential health hazard to consumers. Therefore, the future pest problems will have to be tackled in an environmentally benign manner as a part of a sustainable crop production technology (Dhaliwal and Heinrichs, 1998; Koul et al., 2004; Koul, 2008).

Introduction

Food security is an agricultural issue that has political connotations in the world and more strikingly so in the developing world, where systems of governance has assumed and lost power on this issue. Agriculture not only contributes to the overall growth of the economy but also provides a vital livelihood base, employment and food security to the majority of the country’s population. Recent food price hikes have drawn the attention of the world’s policy-makers and news media to food security which triggered a wide variety of policy responses throughout the world. It threatens the food crisis and livelihood of millions of peoples suffering from hunger and poverty.

Introduction

Taxonomy, which includes identification and classification has transformed into systematics and biosystematics in the recent times and is integrating itself into the biodiversity, which is now a global phenomenon occupying the main thrust of human life. The magnitude and cause of this biodiversity is the central problem of taxonomy and one of the key problems of science as a whole, not to speak of pest management. The science of taxonomy started in the late eighteenth century by a Swedish biologist, Carl Linnaeus who with a small number of similar minded scientists pioneered a standard system of using two Latin names for an organism, denoting “genus” and “species” that is still in use. This led to referring of biological organisms by an universally agreed name and identity, and further providing means for their realistic classifications. When these identifications and classifications got strengthened further with accumulated biological knowledge, it allowed the development of modern biology on a sustainable and stable base. In addition, in the recent times taxonomy has become more demanding subject for areas in science and technology, which are dependant on access to accumulated experience and knowledge for their survival and development. Insect pest management is one such area where taxonomy provides the essential scientific basis, without having any claims of its own and integrating itself in such a manner that its role is difficult to delineate precisely.

Introduction

Information technology is set to become important in agriculture in the coming years. In the last few decades, the application of computers and communication technologies has led to the development of a plethora of information of all types in the area of plant protection science. These information bases are available on CD-ROM, on-line form in various hosts and via mail over internet, multimedia data bases, Decision-Support Systems (DSS)/Expert Systems (ES), Simulation Models (SM), etc.- to cite a few of the latest developments. Further, cyber space is fast emerging as an area of information technology, particularly in the field of crop pest management (Srivastava and Swain, 1998). The application of information technology in pest management has been one of the most exciting developments in the field over the last decade. From the 1960s, the entomologists began using computers for spray scheduling, population modeling, exploring control strategies and managing pest monitoring data. More recently, computers are being utilized in pest management delivery systems and decision support systems (DSS) designed to enhance decision making.

The steadily-increasing human population has led to a rise in the demand for food. As more land comes under agricultural cultivation there will be more pressure on natural ecosystems. Climate change will affect agricultural yield directly because of aberrations in temperature and rainfall, and indirectly through changes in soil quality, pests and diseases. In particular, the yield of cereals is expected to decline in India, Africa, and the Middle East. As the temperature rises conditions will become more favourable for pests such as grasshoppers to complete a number of reproduction cycles and thereby increasing their population. In the higher latitudes (in the northern countries) agriculture will benefit with the rise in temperature as the winter season will be shorter and the growing seasons longer. This will also mean that pests that will move towards the higher latitudes as the temperatures rise. Extreme weather conditions such as high temperature, heavy rainfall, floods, droughts, etc. will also affect crop production.

Agriculture has always played and will continue to play a dominant role in the growth of Indian economy in the foreseeable future. It represents the largest sector producing around 28 per cent of the gross domestic product (GDP). Achieving self sufficiency in food grains production has ensured a high priority for agricultural sector in the successive development plans of the country. Agricultural production is grossly affected by attack of pests/diseases on various crops and the losses in food grains only are to the tune of Rs 90,000 crores each year in India. The prevention of such losses needs substantial consideration and accordingly forewarning of pests and diseases is essential for taking timely control measures. These are also required for assessing losses. Pest/disease infestation in crops is highly influenced by meteorological factors. The weather based modeling for early warning of pest/disease infestation may provide appropriate tool for investigating and predicting pest/disease status.

Introduction

Integrated Pest Management (IPM) has evolved over the last five decades since Stern et al. (1959) first gave the concept of integrated control. The basic tactics of IPM were developed and applied to reduce crop losses against the ravages of pests before the term IPM was coined (Jones, 1973; Smith et al.,1973). Entomologist at the university of California, United State of America (USA) played a pivotal role in developing IPM tactics (Perkins, 1982). Development of resistance to insecticides and the elimination of natural enemies by insecticides led to the development of ‘supervised control’. The publication of the book ‘Silent Spring’ written by Rachel Carson (1962) was a defining milestone for it brought the problems caused by pesticides to the attention of the public and the scientists. The term ‘integrated pest management’ was used for the first time by Smith and van dan Bosch (1967). In the last five decade many synthetic pesticides have been banned. In 1972, ’integrated pest management’ and its synonym were incorporated into English dictionary and accepted by the scientific community (Kogan, 1998). IPM is the main strategy accepted for pest management under agenda 21 of the United Nations conference on Environment and Development (UNCED, 1992).

Introduction

Plant pests have been a part of the man’s environment, since ages. Traditional agriculture which included diverse crops and indigenous crop management practices provided little opportunity for the pests to build up and spread rapidly (Smith and Allen,1954). Crop production is constantly threatened by increasing difficulties in controlling insect pests, which are a major impediment to improved livelihoods of the poor farmers. However, in the quest for increasing food production for the growing population, use of pesticides became a norm in crop management. Pesticides became an integral part of the process owing to losses from weeds, diseases and pests reducing the harvestable produce. Use of pesticides along with high yielding varieties, irrigation and improved seed did result in increased productivity. But the rampant use of these chemicals, under the adage, “if little is good, a lot more will be better” has played havoc with human and other life forms.

13.1. Introduction

Diseases of dairy cattle cause huge economic losses. The losses are associated with lower productive and reproductive performances as well as mortality of the valuable animals. The high producing animals are susceptible to various infectious and contagious diseases. The diseases may permanently affect the performance of the animal e.g., mastitis may permanently damage the quarter(s) of the udder. Thus the culling rate of the herd may increase which affects the profitability of the farm. The occurrence of diseases in cattle is preventable. So, steps are needed to prevent the occurrence of diseases as prevention is better than cure. A number of factors are associated with the occurrence of diseases in animals. Disease prevention and control involves measures designed to prevent or reduce as much as possible the incidence, prevalence and consequences of the disease. These measures can be applied to control the reservoir of infection, break route of transmission or reduce the numbers of susceptible. Various new and environment friendly methods have been developed by modification or refinement of the old methods of disease control and prevention.

12.1. Introduction

Milking is the crucial operation in a dairy farm, as milk is the main source of revenue of a dairy farm. Milking is a labour intensive operation. About 50-60 percent of the total time of farm operation is required for milking and allied activities. Milking is an art which requires skill, patience, efficiency and experience. It should be handled quietly, quickly, gently, cleanly and completely, by avoiding any type of pain, annoyance or inconvenience to the animals. Possession of high yielding animals or good managemental conditions will not generate profit if the milking operation is inefficient.

1.1. Introduction

A typical dairy farm consist of different classes of dairy animals like calf, heifer, breeding heifer, pregnant, milch and dry animals and bull. The systems of management for the different classes are not same. They need some routine as well as periodical farm practices, some of which are common for all categories of animals (i.e., identification, dehorning, grooming etc.), while some categories need special farm operations (e.g., castration in males, milking etc.). Also there is need of routine disinfection of animal sheds and farm premises to prevent and control occurrence of diseases and maintaining the animals healthy. Further for proper execution of all these operations there is need of keeping farm records.  Keeping in view the above points, this section deals with some important farm management practices.

10.1. Introduction

During last few decades dairy animal production has been intensified several folds, along with this reproductive problems have also increased. For efficient dairy animal production, the cow should show regular reproductive activities like cyclic breeding activity, pregnancy at appropriate time, give birth of a live healthy calf and again pregnant after sometimes. If any of these activities are inadequate, then it substantially affects the profitability of the farm. There is an ample scope of improvement of these reproductive setbacks through traditional breeding, feeding and management. However, reproductive problems can be minimized by the use of recently developed reproductive techniques. It not only minimizes reproductive problems, but also improves the reproductive efficiency of the dairy herd and better exploitation of the genetic potential of high merit animals.

9.1. Introduction

Reproduction is an important event in the life of an animal (both male and female). The success of a dairy farm depends on the reproductive efficiency of cattle which depends on the efficient reproductive management. The animals should be reproductively sound. The cow should be a regular breeder with calving interval of 12-13 months to minimize the generation interval and to increase the profitability of the dairy farm. The bull should have high libido, produce good quality semen with high fertility rate.

8.1. Introduction

Providing appropriate nutrition is an elementary step in dairy animal production. Improper nutrition prevents cattle to express full genetic potential for milk production and reproductive efficiency. Nutrition helps in maintaining good health condition of the animal.

Therefore, one should know the basic digestive physiology, various types of nutrients and their requirements in different categories of animals present in a dairy herd. As feed cost contributes principal expenditure of a dairy farm, balanced ration should be prepared in a cost effective manner. Proper understanding of feeds and rations also help to explore alternative feeds and supplements without hampering the health as well as productivity of the animals. Effective dairy farming requires converting feed into milk which worth more than the total cost of production (mostly contributed by feed cost).

7.1. Introduction

The lactating cows are important assets of a dairy farm. The profitability and viability of the dairy farm mainly depend on the overall milk production. The lactation cycle of the cow can be divided into different phases for efficient management as milk production, DM intake and body weight vary considerably during the different phases. In the early lactation, lactating animals loose body weight drastically and they are prone to various metabolic disorders. Efficient nutritional management during lactation is required to support the high milk production, persistency of lactation and health of the cows. Another most important event is the post partum oestrus and subsequent conception, which depends on the care and management of the cows during this period. Therefore, proper care and management of the lactating cows are essential to harvest maximum amount of milk from healthy cows in a sustainable way.

6.1. Introduction

Care of cows at and after calving is vital for successful birth and maintaining the cow and calf in proper health condition. Calving is a high risk event in terms of both cow and calf health, and is associated with most of the health problems. New born calves are born sterile and it gets infection from the surroundings which depends on the maintenance of hygienic environment and care of the just after birth. The fresh cows are susceptible to a number of metabolic diseases and infections due decrease immune status of the cow. Preparation and care during this period will minimize sickness and death of the cow and calf.

5.1. Introduction

A dry cow is a cow that is not producing milk. Usually cow remains in-milk for about 305 days (average lactation length), after that it remains for a period of about 60 days in dry condition (not giving milk) called dry period. Dry period is critical for a cow for regeneration of her udder and reserve nutrients for the next lactation, otherwise, milk production will not be upto the mark and the cow may suffer from several metabolic diseases after parturition. A dry cow is just as valuable as a lactating cow, therefore should be not neglected. A dry cow management programme includes nutrition, general management and health control programme.

4.1. Introduction

Heifers are young female cattle from 12 months of age to first calving. Heifer management is important as they are future cow of the herd. Proper growth and body condition of the heifers are associated with their early sexual maturity and age at first breeding, and their later productive and reproductive performances, when they become cow. Thus, proper care and management of the heifers is necessary to establish a good dairy herd.