eChapters

10.1 Introduction
Developed in the 1950s, ultra-high temperature pasteurization typically involves no hold using a temperature range of 135°C to 150°C. Immediate aseptic packaging determines how well UHT heat treatment of milk works.
10.2 Uperization Developed in Switzerland, this is generally known as “ultra – pasteurization”. Milk is heated in this method under direct steam up to 150 °c for a fraction of a second. One is always learning from this. Fore warming milk to 50 °C is the first stage in the uperization process, meant to eliminate most of the dissolved oxygen and volatile off-flavours by vacuum treatment. In the second step, the milk is first preheated to roughly 80–90 °C and then heated on the uperization chamber under high-pressure steam to roughly 150 °C for ½ to ¾ a second. The product moves into an expansion chamber at almost atmospheric pressure after this heating, therefore inducing some evaporation of moisture. The good is then transferred to a chiller and subsequently into a storage chamber.
The advantages of uperization are
• Long keeping quality.
• Removal of feed and other volatile off-flavours:
• Appreciable homogenization effect.
• Reduction in acidity.
• Efficient destruction of microorganisms.
• Effect of uperization on nutritive value and flavour are not greater than that of pasteurization.

Common name    :    English-Rice
        Hindi-Chawal
        Odia-Dhana
    
Family    :    Poaceae

Habit & Distribution 
The plant (Fig. 70 a) is a annual herb, and several varieties of this plant are largely cultivated all over the world, especially in Asian countries.

General Characters
It is a semi aquatic monocot plant. The plant grows up to 3-5 ft in height. It has long, slender leaves, 50-100 cm long and 2-2.5 cm broad. Flowers are produced in branches arching to pendulous inflorescence 30-50 long. The edible seed is a grain, 0.5-1.2 cm long and 2-3 mm thick. The plant flowers and bear fruits during September-January and also in April-May.

Aphids: Myzus persicae : Aleyrodidae

Aphids are considered as the most serious pest of carnation. Both adults and nymphs suck sap from the leaves and debilitate the plants. They transmit carnation ring spot and carnation mosaic virus disease. They are thus more important as vectors. Regular monitoring for the incidence of the aphid and spot spray-ings of contact insecticides on the shoot tips can easily manage the pest.

Starters are selected strains of micro-organisms deliberately added to milk during conversion into cheese, dahi, yoghurt and other fermented dairy products to bring about specific changes in the appearance, body, texture and flavour characteristics of the desired final products.

Functions of Starters

The primary function of almost all starter culture is to develop acid in the product. The secondary effects of acid production include coagulation, expulsion of moisture, texture formation and initiation of flavour production. In addition to these, the starters also help in imparting pleasant acid taste, conferring protection against potential pathogens and providing a longer shelf life to the product. These bacteria convert 1% of lactose in milk approximately to lactic acid with very little by-products such as acetic acid, ethanol, CO2 and normally with no substances causing taints and hence leading to a clean and wholesome milk souring.

Object: To demonstrate chlorophyll fluorescence.

Material required: Spectrophotometer, fresh green spinach, mortar, pestle, acid washed sand, acetone, funnel, filter paper and test tubes.

Principle: Chlorophyll molecule absorbs light in the blue (450nm) and red (660nm) region and get into excited state and emits an electron. The electron drops back to the ground state within 10-9 seconds and some energy (which is not used in biochemical reaction) are given out as the observed fluorescent far red light.

Procedure and observation: Take some soft green spinach leaves. Grind these with a pestle -mortar in acetone adding a pinch of acid washed sand. Make a fine paste. Filter to get a clear solution in a test tube. Take the test tube in bright sun light.

Purpose

As the immobilisation of upper third part of radius ulna is very difficult ,the purpose of the immobilisation tech. Is to fix the upper third of radius-ulna with the posterior half of ring of Thomas splint with bandages are very important for achieving no movement of fracture fragment during healing.

Indication

Correction of upper third fracture of radius-ulna by Thomas splint application indicated in higher level fracture.

Principle: Addition of calcium chloride results in the precipitation of pectin as calcium pectate from an acid solution. Calcium pectate is washed with water to make free from chloride and is dried and weighed.

Soil pH is the measure of hydronium ion (H₃O⁺) or more commonly hydrogen ion (H⁺) activity in the soil suspension. Soil pH can be measured in soil-water suspension, saturation extract or in 0.01 M CaCl₂ solution. Saturation extract is used to identify specific soil problems such as salinity or sodicity. Measurement of pH using 0.01 M CaCl₂ solution gives more reproducible results than measured through soil-water suspension. It also provides a good approximation of field conditions as the electrolytic composition of 0.01 M CaCl₂ is considered similar to that of soil solution. However, among the three methods, soil-water suspension is most commonly used in research laboratories as well as for fertilizer recommendation as it is simpler and more convenient.

Mammary tumors are either of benign or malignant types. Benign tumors are defined as mass or lump of cells unable to invade the neighboring tissue/ organ and less likely to re-grow after removal. However, malignant tumors are the tumors which have the ability to invade other tissues/ organs and tend to re-grow even after surgical removal. Malignant tumors grow at faster rate as compared to benign tumors. Nearly, 40-50% of canine mammary tumors (CMTs) are malignant.

Etiology

Canine dermatophytosis (canine ring worm) is a relatively common dermatological condition caused by Microsporum canis, Trichophyton mentagrophytes and Microsporum gypseum. These fungi are keratinophilic in nature. It can occur mostly in the face and forelegs.

11.1 Introduction
“Homogenization” is the method of mechanical treatment producing a stable emulsion of milk fat and milk serum. Homogenizer is the name given to the equipment employed for this aim. The fat globules in milk range in size from 1 to 20 microns; the average is 4 to 6 microns. The homogenizer reduces the size of the fat globules in milk or cream passing through it. The most of them are less than two microns. After homogenization, no cream line develops on milk; churning homogenized cream cannot generate butter grains. Moreover, milk like cream’s viscosity is changing, which increases the resistance the smaller fat globules face. The increase in viscosity is ascribed to the fact that more milk protein will be deposited on the surfaces of more fat lobules. Homogenizing milk changes its clotting characteristics, so the curd made with rennet or pepsin is supposed to be softer. Because lipolytic enzymes adsorbed on the extra surfaces provided by the more numerous tiny fat globules hydroly fat, homogenized milk or cream may become rancid more quickly than untreated goods. The milk or cream must be pasteurized either right before or right after homogenization to prevent these changes. Usually, the milk is homogenized after main heating and then pasteurized. Driven via a small valve against hard surfaces, heated milk is under pressure of 2500 psi and in a second stage under 500 psi. With a 1/10000 inch diameter, the aperture the liquid is driven through is quite small. Mechanical force milk through a narrow passage at high speed produces homogenized milk. This produces a stabile fat emulsion and breaks down the fat globules in milk into considerably smaller ones. Homogenization reduces the inclination of the fat globules to cluster and merge into cream. Milk is an emulsion whereby fat globules are distributed across a constant skim milk phase. Raw milk left to sit will finally cause the fat to climb to the top and form a cream layer. By means of a small opening under high pressure, homogenization mechanically breaks down the fat globules. While increasing their number and surface area, this lowers the average size of the fat globules. Practically speaking, the net effect is a substantially decreased inclination for creaming of fat globules. Three elements contribute to this increased stability of homogenized milk: a decrease in the mean diameter of the fat globules (a factor in Stokes Law), a decrease in the size distribution of the fat globules (causing the speed of rise to be similar for most globules such that they do not tend to cluster during creaming), and an increase in density of the globules (bring them closer to the continuous phase) owing to the adsorption of a protein membrane. < Heat pasteurization also breaks down the cryo-globulin complex, which often clusters fat globules causing them to increase. The homogenizer consists of a high-pressure pump with an adjustable opening based on a minute orifice. High pressure force of fluids through the orifice causes a notable change in the physical characteristics of the treated product and generates a very intimate combination of the fluid components. Annexure- II has a Homogenizer schematic.

Common name    :    English- Kewda/Screw pine
        Hindi- Gagan dhul
        Odia- Kia

Family    :    Pandanaceae
 
Habit & Distribution 
It is a shrub (Fig. 71 a), wild in deltaic swamps of Mahanadi and other sandy coastal areas. Seen both in wild and cultivated in India.

General Characters
It is a bushy shrub, reaches up to 3-4 m in height. The leaves are closely spiral, spiny and leathery with fragrance. Flowers are pedicellate with stamens spirally arranged on the floral axis. Flowers have a sweet and perfumed odor.

Chrysomelid beetle : Aulacophora foveicollis : Chrysomelidae

Adults cut tender shoots and feed on leaves resulting in holes and loss of leaf. Grubs feed on roots and underground stems leading to yellowing,wilting and drying of attacked plants.

Object: Measurement of leaf area by graph paper method.

Material required: leaves, graph paper and pencil or pen.

Definition

Fracture of Upper 3rd of tibio-fibula Presence as a difficult Problem for the Surgeon to immobilise it Perfectly. As the fracture site generally moves within the imobiliser. Its healing becomes difficult. The aimof immobilisation technique of upper 3rd tibio-fibula fracture is to fix the upper 3rd of tibio-fibula with the anterior half of ring of thomas splint with bandages. This is an important step for achieving no movement of fracture fragment during healing.

Indication

Correction of upper 3rd fracture of tibio-fibula (Fig.1) by thomas splint application.

Procedure: Standardize the pH meter with a buffer solution of pH. Take the sample solution in a 100 ml beaker. Put the electrodes in the solution and read on pH meter. After each observation, wipe the electrodes with a piece of cotton soaked in distilled water and rinse the electrodes with water with the help of a wash bottle and dry with filter paper.

Electrical conductivity (EC) is a useful indicator of soil salinity. Relationships have been developed between EC and salinity classes for a 1:1 soil: water suspension. With increase in salt content in a soil, the EC increases. Thus, for salt affected soils, measurement of EC is vital as accumulation of salts in the root zone is detrimental to plant growth. EC is a measure of the ability of a soil solution to conduct electrical current.

Equipment and Reagents

1. Digital Conductivity meter
2. 0.01 M potassium chloride (KCl) solution: Dissolve 0.7456 g dry KCl in distilled water and make up the volume to 1.0 litre. This solution has an electrical conductivity of 1.413 dS m_-1 at 25ºC.

CMTs can be classified on the basis of morphologic features, tissue of origin (epithelial, myoepithelial or mesenchymal tissue) or prognosis. The World Health Organization (WHO) classification of canine and feline mammary tumors has categorized CMT into three major categories i) malignant, ii) benign and iii) unclassified tumors. On the basis of histological characteristics, the mammary tumors have been classified into fibroadenomas, adenomas, solid carcinomas (with transformed epithelial cells), tubular adenocarcinomas (with tubule like arrangements), papillary adenocarcinomas (having papillary like projections), anaplastic carcinomas (with highly pleomorphic cells), sarcomas (involvement of connective tissue) and malignant tumors (Fig. 2). Fibroadenomas and adenomas are the types of benign mammary tumors the former contains some connective tissues component in between, and carcinomas, adenocarcinomas and sarcomas come under malignant tumors.

Prokinetic drugs are used to stimulate gastrointestinal motility, including the abomasum, in animals like cattle, especially in cases of abomasal disorders such as displaced abomasum or atony. Below are commonly used prokinetic drugs and their doses:
1. Metoclopramide
Mechanism: Dopamine antagonist; enhances gastric emptying andincreases motility. Dose
Cattle: 0.1–0.3 mg/kg subcutaneously or intravenously every 8–12,hours.
Horses: 0.04–0.08 mg/kg intravenously as a constant rate infusion
(CRI).
2. Erythromycin (Macrolide antibiotic with prokinetic activity)
Mechanism: Mimics motilin, stimulating smooth muscle contractions. Dose
Cattle: 8.6–10 mg/kg orally every 8–12 hours.
Horses: 0.5–1 mg/kg intravenously every 6–8 hours.
3. Neostigmine
Mechanism: Acetylcholinesterase inhibitor; increases acetylcholine at neuromuscular junctions.

Common name    :    English-Yellow flamebouyant
        Hindi- Peela gulmohar 
        Odia- Radhachuda

Family    :    Fabaceae

Habit & Distribution
It is a tree (Fig. 72 a), frequently planted in gardens, road sides etc. and widely distributed throughout India.

General Characters
The plant is a deciduous tree growing up to 15-25 m height with a trunk diameter of about 1m. The leaves are bipinnate, 30-60 cm long, with 16-20 pinnae, each pinna with 20-40 oval leaflets. The flowers are yellow, 2.5-4 cm diameter, produced in large compound racemes up to 5-10 cm long and 2.5 cm broad, red at first, ripening black and contain 1-4 seeds. The plant flowers during March-May and bears fruits during April-December.