eChapters

Abstract

Population dynamics studies of phytoparasitic nematodes (mainly 2nd stage juveniles of root-knot nematode; Meloidogyne incognita) in the rhizosphere of persimmon (Diospyros kaki ) orchard, were carried out, in relation to seasonal fluctuations. There was recorded remarkable impact of temperature on the nematode population.  Highest nematode populations (7148/ 200 cc soil) were recorded during May, when temperature was maximum; 22.9^ºC (15.7- 30.0^ºC). Least population density of the nematode were extracted during January when temperature remained minimum; 7.9^ºC (2.4-13.3^ºC). However, relative humidity during entire course of investigation did not show any considerable impact on the population fluctuation of the nematode. With the fall in temperature from July onwards up to January (22.6- 7.9 ^ºC) there was gradual decline in the nematode population (3813- 468/ 200 cc soil), showing thereby that nematode populations in the rhizosphere is directly affected by the prevailing temperature and thereby soil temperature.

The concept of immunonutrition has been developed in humans and animals mainly in relation to its impact on reinforcement of the immune system and its ability to resist disease. However, in the case of immunology of reproduction, different (even opposite) mechanisms  of immune system modulation are likely to be involved since the main objective is a local inhibition or the attenuation of the immune system toward the protection of the embryos. Most of the studies investigating the role of feeding and /or specific nutrients have used nutrient deficiency models to identify the mechanisms involved. During recent years, an increasing number of substrates have been recognized for their immunomodulating function. Macro and micronutrients have been identified as so-called immunonutrients. Although informative, such an approach might not apply to a concept of immunonutrition for reproduction when the dietary levels of a given nutrient will have to cover both the metabolic and immunomodulation needs for optimal reproduction.

Sowing of Seed: It is a process of planting seeds of crops in well prepared or no till field or nursery beds/pots for raising crops in following methods:

Methods of Sowing: The sowing method is determined by the crop to be sown and resources on the disposal of farmer. There are 6 sowing methods which differ in their merits, demerits and adoption. Those are:

1.Broad casting

2.Broad or Line sowing

3.Dibbling

4.Transplanting

5.Planting

6.Putting seeds behind the plough.

The growth pole theory was developed by French regional economist, Francois Perroux, in 1955. He was concerned with the phenomenon of economic development and with the process of structural change. Growth pole is a central location of economic activity. It is an urban location where economic activity ignites growth and better quality of life in the urban periphery.

He attempted to explain how modern process of economic growth deviated from the stationary conception of equilibrium growth. His arguments were based on Schumpeter’s theories of the role of innovations and large scale firms.

In Schumpeter’s analysis, development occurs as a result of discontinuous spurts in a dynamic world. The cause of discontinuous spurts is the innovative entrepreneur whose activities take place in large-scale firms. These firms are able to dominate their environment in the sense of exercising reversible and partially reversible influences on other economic units by reason of their dimension and negotiating strength, and by the nature of their operations.

Scale of operations, dominance and impulses have close relationship to innovate. This is the most important feature of Perroux’s theory and leads to the concepts of dynamic propulsive firm and leading propulsive industry. The dynamic propulsive firm is relatively large and belongs to a relatively fast growing sector. It has a high ability to innovate and intensity of its interrelation with other sectors of the economy is important enough for the induced effects to be transmitted to them.

Introduction

Goat is being raised for centuries as poor man’s cow due to its importance of providing employment in rural areas by producing meat and healthy meat. Goats also play a major role in agriculture economy of India. Goat is excellent source of additional income for poor and landless owners. The goat milk is nutritious and easily digestible milk to their kids. Goats are easy to maintain as they can graze on open land. Goat farming is an excellent option where fodder and forage is limited. Goat farmers can get good returns with successful goat rearing. Now a day, goat farming has become more commercial and many people are taking up as a challenge to meet the demand and supply. Rank of India in goat population is 2^nd. Total goat population in the country is 148.88 million during 2019. Total goat has increased by 10.14% over previous livestock census (2012). About 27.8 % of the total is contributed by goats.

In R there is facility of reshaping the data. Reshaping of data includes joining of two or more vectors to create a data frame. Also two or more data frames can be merged. Appropriate functions are available for these jobs. While merging the data frames, we can join columns or rows.

Illustration of joining two vectors by using cbind() function.

Pest and pathogen incidence is a natural occurrence that frequently goes unreported. However, they become a concern when their spectra expand and cause significant losses. Chemical pesticides are now commonly used in agricultural techniques to lessen the impact of such severe damages. Without a question, the use of chemical pesticides has put human health, ecological health, and sustainability at danger.

The digestive mechanism of a pig is ideally adapted to full concentrate-based meals. The digestive organs are quite simple, with a continuous musculomembanous tube from the mouth to the anus. However, this system includes multiple sophisticated interaction functions.

Mouth

The mouth is necessary not only for food consumption, but also for first partial size reduction by grinding. While teeth are the major means of reducing meal size and increasing surface area, when feed is mixed with saliva, the first step in the chemical breakdown of food occurs. The three primary salivary glands are the parotid, mandibular, and sublingual glands. Saliva secretion is a reflex activity that occurs when there is food in the mouth. The amount of mucus in saliva is determined by the wetness or dryness of the meal consumed. As a result, on a dry diet, more saliva mucus is secreted, whereas on a moist diet, only enough is secreted to aid in swallowing. Amylase, the enzyme that hydrolyzes starch to maltose, is present in saliva in very low amounts. Salivary digestive enzymes provide a minor effect. Food is chewed and mixed with saliva before going to the stomach via the mouth, throat, and oesophagus. Oesophageal movement involves muscle peristalsis, or the contraction and relaxation of muscles to move food.

1. Farm Publication

Is a class of publications prepared by the extension agency in printed form, containing information relating to the improvement of farm and home. Farm publications are of various types such as leaflet, folder, bulletin, newsletter, journal and magazine. Farm publications may be used singly or in combination with other extension methods.

Objectives

1. To reach a large number of people quickly and simultaneously at a low cost.
2. To provide accurate, motivating, credible and distortion free information.

A puppet is an object resembling a human, animal, or mythical figure, animated or manipulated by a puppeteer. Puppetry, an ancient form of theatre dating back to the 5th century BC in Ancient Greece, encompasses a wide array of puppet types, crafted from diverse materials to suit various forms and purposes.

Puppets vary greatly in complexity, from simple constructions to intricate designs. The puppeteer controls movements using hands, arms, or devices like rods or strings, manipulating the puppet’s body, head, limbs, and sometimes its mouth and eyes. Often, the puppeteer provides the character’s voice, synchronizing speech with puppet movements, which together convey narratives and stories.

Among the simpler puppet types are finger puppets, miniature figures fitting onto a single finger, and sock puppets, created and animated by inserting a hand into a sock, manipulating the hand to simulate the puppet’s mouth movements. Hand puppets, including live-hand puppets operated by one hand inside the puppet, and larger versions like live-hand puppets requiring two puppeteers, also feature prominently.

Proper nutrition is essential for the health and well-being of dogs at every stage of life. The nutritional needs of a dog change as it grows, so it’s important to tailor their diet according to their age, size, and health status. Below is a comprehensive guide on the nutritional needs of dogs, broken down into different age groups: puppies, adult dogs, and senior dogs.

1. Puppies (0-12 Months)

Puppies are in a rapid growth phase and require a high level of nutrients, including proteins, fats, vitamins, and minerals, to support the development of muscles, bones, organs, and the immune system.

Nutritional Needs

Protein: Puppies require high-quality animal-based protein to build muscle and tissue. Around 22-30% of their diet should be protein-rich. Chicken, tur key, fish, and eggs are excellent sources.

Samples for toxicological analysis are usually taken during post-mortem examination. In suspected cases of poisoning the following specimens should be sent for chemical analysis.

Snow is precipitation of solid water, mainly in the form of branched hexagonal crystals or stars. It is “precipitation of white opaque grains of ice”. Measurement of snow cover is related to runoff estimation and also important for hilly agriculture.

4.1. Snowfall

It is the amount of fresh snow deposited over a specified period (generally 24 hours). The measurements relate to depth and water content of the snowfall.

I. FILL UPS

1. _____ is called as ‘king of fibres’ and ‘white gold’.
2. _____in the cotton meal is toxic to monogastric animals.
3. A purple spot is found in the claw of the petals is called _____
4. The isolation distance adopted for cotton is _____ for foundation seed.

Seedling:A seedling is a very young plant that grows from a seed. When the moisture, light, and temperature conditions are correct, the seedling’s development begins with seed germination and the formation of three main parts:

1.Radicle - Embryonic root

2.Hypocotyl - Embryonic shoot

3.Cotyledons - Seed leaves.

In vegetables and annual ornamental crops where generally seed size is small they are germinated in nursery beds or in plug trays indoor (greenhouse) or outdoor(field), hardened before transplanting.

Sapling: A sapling is a young tree, say more than 1 year and less than 3 years’ old. In the life cycle of trees, a seedling converts into a sapling as the next stage of development. It is nearly one-meter tall and generally remains to be known as a sampling until its stem reaches 7 centimetre in diameter. The time period of this stage depends upon the particular species of a tree. In vegetable and annual ornamental crops seedlings generally are one month to 40 days old. Older than this, seedlings do not give better yields on transplanting. Very young seedlings exhibit larger mortality on transplanting.

Transplanting: Transplanting or replanting is the technique of moving a plant by uplifting from one location to another. From nursery beds seedlings or saplings are shifted and planted either in the field or greenhouses for commercial growing. Seedlings are uprooted if grown in soil medium. They are transplanted with growing medium. Uprooted seedlings take time to establish at a new place and face transplanting shock- time taken by roots to establish contact with the soil or growing medium.

Introduction

Sheep is a multi-utility animal used for the production of wool, meat, skins and manure. They don’t require costly structures to house them. Sheep are sparing convertor of grass into meat and wool. The structure of their lips causes them to clean grains last to collect time and in this way convert waste feed into gainful items. Sheep eat different types of weed plant. This makes them phenomenal weed destroyer. They don’t damage plant like goats. They thrive well even under bad management practices. Unemployed youth can adopt sheep rearing as a source of gainful employment. Total sheep population in the country is 74.26 million during 2019. Total sheep has increased by 14.133% over previous livestock census (2012). About 13.8 % of the total livestock is contributed by sheep.

The most important use of R programming lies in importing of data files which serves as input for the analysis work. After the analysis is over by using R codes, operators and functions, the output result must also be exported in form of files. The files are imported in form of csv files (comma separated variable), text files or excel files.

Before going to the actual content of the chapter we have to have an idea about csv files. CSV stands for Comma Separated value. It is used to store tabular data, such as a spreadsheet or database. CSV is delimited text file in which the values are separated by commas. CSV files occupy much less space than excel files and also gets imported in a program at a much faster rate than Excel files. CSV Files also does not manipulate data and stores as it is.

Let us consider that an excel file named as ‘plant’ which stores three variables, named as ph, pd and yield is created inside the folder named as ‘My Data’ which is placed in the desktop. Thus the path of the file is “C:\\Desktop\\My Data\\plant”

To import excel file the package will be readxl and the command will be library(readxl)

6.1 Designing primers

Designing correct primers are very important to get the expected result in PCR experiment. There are two primers (Forward & Reverse) required for the amplification of the desired DNA fragment. One primer should anneal to the sense strand (oriented to the 5'→3' direction) and another primer should complement the antisense strand (oriented in the 5'→3' direction).

There are various characteristics to be considered to design a good primer including Tm, length, GC content, secondary structure and specificity.

There are commercially available softwares besides free online tools at NCBI (primer blast) for designing PCR primers. In addition, primer sequences published in peer reviewed literature can also be used.

Reproduction that does not involve the union of male and female gametes is known as asexual reproduction. Reproduction in which sexual organs or related structures take part but fertilization does not occur, or crops which are propagated asexually or by vegetative means are known as asexually propagated crops. Most of the fruit plants are propagated asexually which consist of large number of clones. Example: sugarcane, potato, sweet potato, banana, mango, citrus, pears, peaches, litchi, crops that propagates by asexual means. The procedure of selection used for asexually propagated crops is known as clonal selection, since the selected plants are used to produce new clones or superior clones can be isolated from local variety, introduced variety or inter crossed population.

Determination of soil texture mainly depends on the complete dispersion of soil aggregates into their individual primary particles without triturating the particles themselves, accurate fractionation of the sample into various separates, sedimentation of different particles in the viscous medium as well as measurement of individual particle by the hydrometer.