eChapters

African leaf vegetables (ALVs) are vegetable species utilized for their leaves and have become a part of the African tradition. This is a dynamic concept that is changing with the African culture and the term ALV embraces not only indigenous, but also indigenised species. These species are very nutritious, and contain high levels of pro-vitamin A and iron. ALVs are often more hardy than the introduced “modern” vegetables. The important role that ALVs have played in African livelihood strategies has been ignored, especially in the last half of the twentieth century. This led to ALVs being seen as a low-status crop, but this perception  started to change during the last two decades. ALVs are entering the commercial market and regaining its equal status in many African countries. ALVs are mostly used as an ingredient in relishes and soups to accompany starchy staples and sometimes meat.

ALVs include species cultivated in farmer fields and home gardens, like  pumpkins and cowpeas, and species harvested from  wild and fallow lands, like eru and cleome. Certain cultivated species have only recently been domesticated after a long history of wild harvesting.  Currently, ALVs are mainly cultivated using traditional farm practices with almost no African countries having formal seed systems. After years of neglect by formal research, more and more research institutions are initiating research on ALVs. Amaranth, cleome, corchorus, cowpea, pumpkins, nightshades, african eggplant, moringa, ethiopian kale, roselle, bitterleaf, taro, slenderleaf and water spinach are listed as the most prominent ALVs in Africa.

The aim of the research is to make a study of the role of Internet as a medium of interaction, its impact on the society from the social and cultural point of view. Keeping these objectives in mind, the researcher has referred to contemporary researches, books and articles available in the area. The researcher admits that the number of studies available in the area is very much dispersed. In the line of the research questions formulated for conducting the study, the researcher has explored the relevant studies undertaken so far by different researchers.

Urban agriculture involves various aspects of growing plants and taking up other activities. Those include terrace gardening, vertical gardening, green walls, hydroponics, etc. Although several other types of garden present in urban areas, the gardens suitable for residental premises are discussed in chapter.

Terrace Garden

Terrace garden is generally established on a terrace or rooftop of a house having limited land space for gardening. This type of gardening is gaining momentum in the cities. These gardens can be created on different buildings like residential flats, individual houses, public buildings, commercial establishments and factories. The growth and development of the plants give immense pleasure to the garden owner. Plucking a fresh cucumber on the terrace provides a different pleasure, which is beyond the physical value of the fruit. The experience of consuming a fresh watermelon from own garden has unique satisfaction. As there is minimum or no space for growing plants in urban areas, the terrace can be transformed to an attractive garden. Irrespective of size of the terrace, it can be converted to a beautiful garden with proper planning. There are multiple ways for revamping the terrace depending on available time and resources.

India is the second largest producer of fruits However, the export potential of fruits and vegetables is very negligible. This is because of improper knowledge to the farmer about proper post-harvest infrastructure facilities. Fruits have a high-water content ranging from 70-95 per cent. They dry quickly under any normal atmospheric condition. These causes loss of rigidity and shrinkage of the cells cause wilting and shrivelling. Appropriate packaging ensures prolonged the shelf life of fruits and vegetables by preventing moisture loss and thereby wilting. Transportation is a critical phase in the fruit supply chain that can significantly affect the quality of fruits. Several factors during transportation can lead to quality degradation such as temperature/humidity fluctuations, mechanical damage, transit time etc. To mitigate the adverse effects of transportation on fruit quality, best practices ie, real-time monitoring, temperature and humidity control, loading/unloading techniques can be employed. Quality evaluation is a critical component in the fruit industry, encompassing a range of assessments to ensure fruits meet the desired standards for consumer satisfaction, shelf life, regulatory compliance, and market competitiveness. It involves a comprehensive approach that includes physical, chemical, and sensory assessments, supported by advanced technological tools, to maintain and enhance the quality of fruits throughout the supply chain. This book chapter deals with the effective packaging, transportation, and quality evaluation of fruits, ensuring that consumers receive fresh, high-quality produce.

Introduction

Potato is the fourth most important food crop in India after rice, wheat and maize. India is second largest producer of the world after China having a production of more than 45 million tones. The major producers of potato  are Uttar Pradesh (14.43 million tones) followed by West Bengal (11.6 million tones) and Bihar (6.6 million tones) during 2012-13. In Uttar Pradesh during rabi 2013-14 the total production of potato is expected to be 46.2 million tones. The major potato producing districts in Uttar Pradesh are Agra, Farrukhabad, Firozabad, Hathras, Kannauj and Barabanki. Potato arrival is maximum in Farrukhabad, Kanpur and Varanasi  APMC Mandi and the highest arrival is in the month of march and lowest is in the month of October.

The pandemic in 2019-2022 spread swiftly and became global in no time, caused by SARS-CoV-2. Vaccines were rapidly developed against the virus to restore public health and save global economy. Vaccines for immunisation drives were developed in a year of the pandemic becoming global and approved for ‘emergency use’ following expeditious development protocols. Vaccine development employed numerous nucleic acid, adenovirus and protein-based state-of-art molecular platforms, alongside the conventional attenuated and inactivated virus approaches. The majority of the attempts were successful and approved for use. All the approved vaccines were found safe and effective as per Phase I through Phase III clinical trials’ results. Mass immunisation drives demonstrably led to reduced hospitalisation, low disease severity and less mortality. Yet, there were initial vaccination hesitation across the world due to associated safety concerns about its possible long-term negative consequences. A part of it was attributed to technical reasons (as clinical trials were not fully complete with sturdy and convincing outcomes), and a majority was due to the misinformation that floated on the social media and other digital communications. Vaccine deployment across the globe was far from being equitable. Thus, immunisation was rapid in higher income (developed) nations with access to innovative advanced vaccines while low immunisation rates were seen in the low- and medium-income countries accessing majorly the vaccines based on simple technology. Given the scale and spread of the pandemic, scaled-up vaccine production and equitable distribution to limit viral spread and improve global health and socioeconomy were critical. This chapter attempts to dissect these scenarios and lessons learnt from these to prepare better for any such pandemic in future.

3.1 Introduction
The different moulding machines are listed below.
• Thermoforming moulding
• Injection moulding
• Compression moulding
• Transfer moulding
• Extrusion moulding
• Blow moulding
• Rotational moulding
• Hydroforming
• Laminating
The melting furnaces, which feed molten metal to fill mould cavities are listed below.
• Cupola furnace
• Induction furnace
• Open hearth furnace
This chapter presents the different moulding machines and melting furnaces.
3.2 Thermoforming Moulding
To develop unique packaging solutions, thermoforming is the process of stretching a heated plastic sheet over a mould, then trimming, and assembling the design once the sheet has cooled as shown in Fig.3.1. The hot thermoplastic is stretched over the surface of the mould using the two thermoforming processes, viz. vacuum forming and pressure forming. A thermoforming machine is a sizable piece of industrial machinery that allows us to vacuum-form a plastic sheet onto an object as the sheet is being moulded. Thermoforming machines are used and benefited by a variety of businesses to efficiently package their products. The material used to produce parts by thermoforming machines is thermoforming plastic. Numerous thermoforming polymers are available for use in particular applications.

Variation is inherent in almost all biological populations. In any science, research work, that is, the study and explanation of development changes in a phenomenon can be theoretical as well as experimental. Thus, in order to have solution to a problem the need arises to collect relevant information (called data) their analysis and interpretation through appropriate statistical tools. Statistical analyses help the biologists to draw appropriate conclusions. For instance, in Integrated Pest Management (IPM) the entomologists are primarily concerned with the estimation of insect-pest population, its distribution pattern over time and space, its relationship/fluctuation in population with the prevailing weather parameters and ultimately its control measure through the judicious use of chemicals, biological control agents and resistant varieties etc. There are two broad modes of collection of data:

This chapter provides a comprehensive overview of the randomized block design (RBD), detailing its theoretical concept, layout, and a detailed segment on pooled ANOVA concepts. It explains the mathematical models for RBD and how to interpret the results from ANOVA tables in this context. The chapter also offers step-by-step guidance for analyzing RBD, Factorial RBD, and pooled RBD ANOVA using R.

Randomized Block Design

The RBD is a widely used experimental design in statistics and research, particularly when dealing with certain specific conditions:

• Homogeneity within blocks: RBD is ideal when there is inherent variability in the experimental units, but this variability can be grouped into homogenous blocks. Each block contains a complete set of treatments, and the blocks themselves account for the variability.

• Principles of experimental design: RBD adheres to the core principles of experimental design, namely randomization, replication, and local control. Randomization is used within blocks to assign treatments, ensuring that the comparison of treatments is fair.

• Replication across blocks: In RBD, each treatment is replicated across different blocks. This replication enhances the reliability and robustness of the experimental results.

• Managing uncontrolled variability: RBD is particularly effective in field experiments or situations where external variability (e.g., soil type, light conditions) cannot be completely controlled. By grouping similar units into blocks, RBD effectively reduces the impact of this uncontrolled variability on the treatment effects.

• Improvement in experimental accuracy: The use of blocks to organize the experimental units usually leads to a reduction in the error variance compared to CRD. This enhances the accuracy and precision of the experiment.

3.1 Overview of pyrolysis technology

Pyrolysis is a process derived from the Ancient Greek words “pyro” meaning f ire and “lysis” meaning separation, which means separating by using heat or fire. This is a thermochemical conversion process that converts biomass into a useful intermediate liquid product, which can be further transformed into a hydrocarbon biofuel, oxygenated fuel additive, or substitute for petrochemicals. Pyrolysis is similar or overlapping with other thermochemical processes such as cracking, carbonization, torrefaction, destructive distillation, dry distillation, and thermolysis. It is not related to gasification, which involves chemical reactions with a gasification medium.

Modern agriculture faces the challenge of increasing food production while minimizing environmental impacts like soil degradation, water pollution, and biodiversity loss. To address these issues, integrating microbial biotechnology with nanotechnology has emerged as a promising approach. Nanoparticles (NPs) with plants and microbes, enhances nutrient uptake, plant growth, and stress tolerance. Bioinoculants, which contain beneficial microorganisms, promote plant health, but are limited by stability and environmental factors. The synergistic use of nanoparticles and bioinoculant offers a novel solution, improving crop yield, nutrient uptake, and resilience to stress, reducing dependence on chemical inputs. This integration supports the development of more resilient, resource-efficient, and environment-friendly agricultural systems.

1.1 GENERAL DESCRIPTION

There is a folk tale from India which is mentioned under relevant situations. This tale teaches how different perspectives lead to different points of view. The tale of the blind men and an elephant originated in the ancient India, from where it has been widely spread to different parts of the world. This famous ancient tale mentions about six blind men who had never come in contact with an elephant during their lifetime and who know and visualize what the elephant appear like by touching it and feeling. In the tale it is highlighted that every blind man touches a different part of the elephant's huge body, but only one part, such as the leg, ear, tail, body or the tusk. These blind men then go on to narrate about the elephant on the basis of their touch and feeling and their recount of the elephant varied widely from each other. They were told that elephants could trample forests, carry huge loads and is very big in size. The six blind men were taken to the elephant and asked how it look like (Fig.1.1). The first blind man reached out and touched the side of the huge animal. "An elephant is smooth and solid like a wall!" he declared. "It must be very strong and powerful." The second blind man put his hand on the elephant's trunk. "An elephant is like a giant snake," he said. The third blind man felt the elephant's pointed tusk. "I was right," he decided. "This creature is as sharp and deadly as a spear." The fourth blind man touched one of the elephant's big ear and announced "I believe an elephant is like a huge fan or may be a magic carpet that can fly over mountains and treetops". The fifth blind man touched one of the four legs. "What we have here," he said, "is pillar of a house." The sixth blind man gave a tug on the elephant's coarse tail. "Why, this is nothing more than a piece of old rope and it appeared to him dangerous, indeed”.

Introduction Shrimp aquaculture is a rapidly growing sector worldwide due to transform the intensive cultural practices. The demand for shrimp in the global trade market has increased significantly. The commercially farmed shrimp species, Pacific white leg shrimp, P. vannamei, dominate the market compared to tiger shrimp, P. monodon. Achieving higher shrimp aquaculture production often involves employing high stocking densities and large volumes of feed. This intensification can lead to increased waste and the accumulation of toxic substances, resulting in water pollution, requiring costly management measures to address these issues (Liu et al., 2019; Abakari et al., 2021). Therefore, addressing waste management and water quality concerns is crucial for sustaining the productivity and profitability of shrimp aquaculture operations. In addition to these, several other associated problems – decline in available land resources, escalated environmental pollution, the spread of recurring diseases, the emergence of drug-resistant microorganisms, and the impacts of climate change – with the development of shrimp aquaculture were reported (Santos and Ramos, 2018). To avoid these issues, it is essential to regulate and implement sustainable shrimp aquaculture practices that can be achieved through species and system diversification and environmentally sustainable technologies. Adopting these BFT systems allows for a more sustainable and resilient aquaculture operation (Zhao et al., 2016; 2021).

ABSTRACT

Commercially valuable plants are one of the main sources of economy. Growth, development and yield of these plants are severely affected by various environmental factors, which depend on dynamic fluctuations in different parameters. To counteract these responses, plants try to adapt evolutionarily but one form of adaptation is never going to suffice the simultaneous attack of multiple stresses. Crossing and plant breeding approaches came to practice, which is quite beneficial but requires lot of screening and is manpower consuming. In recent era new approaches have been developed combining recombinant DNA technology with tissue culture techniques to obtain improved varieties with specific desired traits. This method had an edge over other technologies but it still carries lot of complications. It is evident that genes do not act alone but act cooperatively and remain in continuous influence of other factors. So to target a particular gene for improved variety development requires a lot of detailed micro-details. In this communication, an attempt have been made to discuss mainly how transcription factors (TFs) have been targeted for this purpose. TFs in many occasions act as master regulators or central players of a particular pathway. This is attained by their ability to interact with multiple cis-elements present in the promoters of downstream stress or metabolism responsive genes. This behavior sometime leads to occurrence of some unwanted traits, which should be kept in mind to develop transgenics. Here, we focused mainly on important TF families such as ERF, WRKY, NAC and bHLH. We have been an attempt to analyzed how these TFs influence growth, yield and stress response of commercially valuable plants such as rice, wheat, tomato and cotton. This section will help to understand the genetic manipulation of plants can be targeted for improved variety development.

A. Non-thermal Processing

Non-thermal processing encompasses a diverse range of food preservation and treatment techniques that do not rely on heat as the primary means of achieving microbial inactivation or quality preservation. Unlike conventional thermal methods such as pasteurization and sterilization, which involve exposing food to elevated temperatures for a specified duration, non-thermal processing methods operate at or near ambient temperatures. These innovative technologies offer several advantages, including the preservation of sensory attributes, retention of nutritional quality, and minimization of detrimental effects on food texture and f lavour (fig 1).

17.1 Introduction
Pouring liquid plastic into a specific container or mould and allowing it to solidify into the desired shape is known as plastic moulding. After that, a variety of uses for these plastic moulds are possible.
The different types of plastic moulding/ forming processes are listed below.
i. Injection moulding
ii. Compression moulding
iii. Extrusion moulding
iv. Transfer moulding
v. Blow moulding
vi. Rotational moulding
vii. Film blowing
viii. Vacuum bag forming
ix. Thermoforming
x. Bonding of thermoplastics
17.2 Injection Moulding
Using a pre-made mould and plastic resin, thermoplastic injection moulding is a manufacturing technique that produces completely functional items. It falls into a few subcategories, like fast injection moulding, which is best used for finetuning prototypes before approving a product for mass production. Plastic resin of any engineering grade can be used for thermoplastic injection moulding. General resins are used to make early prototypes or less important portions of a product, whereas engineering grade resins are usually employed to construct final prototypes before to manufacture. The term “general resins” refers to materials such as TPE, ABS, nylon, PET, polypropylene, and polyethylene. Reels of engineering grade include ultem, valox, noryl, and lexan. Product developers can experiment with various materials and surface treatments for their products because of the wide variety of plastic resins that can be processed via thermoplastic injection moulding.

    Introduction
Over 60% of the population in India is occupied in agriculture and associated fields, making it one of the world’s most agriculturally dense nations. In India, the agricultural sector accounts for 18.6% of the country’s GDP. Almost all crops, including cereals, vegetables, and cash crops, are grown in India (Vanitha et al., 2013; APEDA, 2020). From the beginning of time, several pests, including weeds, insects, plant diseases, and nematodes, have had a detrimental effect on agriculture. As a result, crop losses are estimated to be 45%, or over 290 billion, annually (Aneja et al., 2016). Regardless of tactics, illnesses and pests significantly contribute to agricultural losses. Diseases, weeds, and insects hinder plant growth and lower plant density, eventually lowering the food supply. The Entomological Society of America (ESA) has released a policy statement stating that invasive insects cost more than $2.5 billion to control and cost $18 billion per year in economic losses to pastures, crops, lawns, and forests (The Not-So-Hidden Dangers of Invasive Species, 2018). Invasive crop pests continue to threaten food security because of the intricate relationships between human migration, international trade, climate change, and evolving agricultural techniques. Several of these variables also contribute to the sharp rise of urban pests and disease-carrying insects. The primary method of insect pest management has been chemical pesticides. Nonetheless, an increasing call for less agricultural chemical use due to worries about the environment, human health, and pesticide resistance ignites interest in novel ways.
Conventional chemical pesticides have raised food production and harmed non-target animals and the ecosystem. To prevent and mitigate pest-induced crop losses in storage (post-harvest losses) and in the field (pre-harvest losses). This has been accomplished through the development of numerous crop protection techniques. In the past few decades, chemical pesticides have been utilized to reduce food losses induced by insect pests; however, this has decreased agricultural production. Moreover, volatile pesticide residues have periodically raised questions about food safety among domestic customers and presented challenges to export crops’ ability to trade. Insecticides can cause physical or biological harm to pests. Certain insecticides are applied topically or indirectly to plants those insects may consume. Pesticides harm nature, soil, and human well-being, so regulations and rules governing their use are becoming more stringent. New technology and products to control and prevent pests are desperately needed. In modern agriculture, various methods are now available, including biological control, insect behavior, genetic modification, microbial pesticides and plant immunization of pest populations.

Definitions: Before starting the chapter, it is better to understand the basic definitions of the terms commonly used in this chapter.

Waste: Waste is any material or object which is discarded after its primary use by its holder. A holder means the person who produces and keeps the waste.