eChapters

Introduction

Disaster is defined as a serious disruption of the functioning of a community or a society causing widespread human, material, economic or environmental losses, which exceed the ability of the affected community or society to cope using its own resources (ISDR 2002).

Disaster in Global context - The impact of natural disasters in terms of human and economic losses has risen in recent years, society in general has become more vulnerable to natural disasters. Those usually most affected by natural and other disasters are the poor and socially disadvantaged groups in developing countries as they are least equipped to cope with them (IFRC 2001).

Introduction

Natural Disasters are inevitable, and Indian subcontinent is prone to all type of Natural Disaster either it is flood, drought, cyclone, earthquakes, tsunami or forest fires etc. Disasters can be classified in several ways. A possible sub-division of disaster is: (i) Natural Disasters; (ii) Human made disasters; (iii) Human induced disasters. Another sub-division is related to the main controlling factors leading to a disaster. These may be meteorological, geomorphological/geological, ecological, technological, global environmental and extra terrestrial. Another useful distinction that can be made between disasters is regarding their duration of impact and the time of forewarning. Some disaster strikes within a short period with devastating outcomes; others have a slow onset period with equally or more serious repercussions. According to the available statistics 60% of the total area of Indian subcontinent is venerable to seismic activity of varying intensities, 16% of the country’s total area is drought prone. In India 68% of total sown area of the country is drought prone. Coastal areas of India is exposed to tropical cyclones, tsunami in recent years and among all the disaster occur in the country, River floods are the most frequent and often the most devastating.

Introduction

Disasters are the natural and man made extreme events which exceeds the tolerable magnitude of any event, where adjustment is difficult. These events are catastrophic and results in the loss of life and property on a huge scale. These abnormal events form the headlines to the newspapers and media a world and national level.

These processes are beneficial to the human beings because they form the earth and habitable planet for the evolution of life. However, these processes within a short time limit forms, hazardous and such activities adversely affect the human beings and human related activities on a very large scale.

Amongst the three important types of disasters viz. natural, anthropogenic and technological, the first and the foremost natural disaster mainly includes the geological atmospheric and other related natural types viz. floods, earthquakes, cyclones, tsunamis etc.

Introduction

A disaster is the result of an immediate situation or the result of a long, set process, which disrupts normal human life in its established social, traditional and economic system. This is due to the destruction of environment which is caused by extraordinary natural destructive phenomena or human-induced hazards resulting in human hardship and suffering beyond recovery unless external aid is brought in.

Introduction

Earthquakes are the most destructive among all the natural hazards. Most of the time, they occur without any warning, which makes them most feared and unpredictable natural phenomena. Globally, on an average two earthquakes of magnitude 8 are known to occur every year. Some of the countries like Japan, China and United States have suffered several damaging earthquakes in the past. India has also experienced a number of high intensity earthquakes in the recent past and more than 650 earthquakes of magnitude >5.0 have been reported in India since 1890. Sixty-nine earthquakes in Delaware (U.S.A.) have been documented or suspected since 1871. Refer to Baxter (2000) for more details about the DGS Seismic Network and for documentation of earthquakes. In the 1930s Charles Richter developed a magnitude scale (Richter scale) which was an objective way of discriminating between large and small shocks using the seismic wave amplitude recorded by seismographs (Richter, 1958).

Introduction

The state of Maharashtra now again reels under the scarcity of water. Geologically, major part of the state is covered by Deccan basaltic flows. This basaltic terrain, as such, has been labelled notorious as far as the availability of groundwater is concerned. Uncertain availability of groundwater in the terrain is due to heterogeneity in the nature of piles of basaltic flows which adversely affects the geohydrological characters of the rocks.

The area understudy is unfortunately, a part of basaltic terrain in which no storage structures like major dams or medium projects have been constructed across the existing rivers. Consequently, the irrigation in the area and domestic needs of the people solely depend on whatever water is available in the existing dug wells. The wells do not suffice the need of the people because the percolation of water in the wells is not adequate in major part.

Introduction

On 26^th December 2004, the Indian coastline experienced the most devastating tsunami in recorded history. The tsunami was triggered by an earthquake of magnitude Mw 9.3 at 3.316ºN, 95.854°E off the coast of Sumatra in the Indonesian Archipelago at 06:29 hrs making it the most powerful in the world in the last 40 years. In recent years increasing the vulnerability to natural disasters of developing countries is a major reason for concern. The potential loss of human lives and property due to natural hazards is very high in the urban areas of these countries. The Information obtained from conventional tsunami hazard maps does not always provide sufficient data for users .needs. The difficulty in presenting more significant information on tsunami hazard maps in conventional paper format is due to the limited available physical space of that format. Printing more information on such paper maps tends to confuse rather than provide more needed information to users. Furthermore, these kinds of maps provide little opportunity for users to ask for additional information, to determine the relationships between different kinds of information and important quantitative analyses. Furthermore, Tsunami hazards have important temporal attributes. Presenting these attributes on the map; e.g. the sequence of volcanic eruptions in a region or the frequency of tsumani in a particular area during a particular period of time is very difficult.

Introduction

The Rispana river is a order of stream forming a tributary of Ganga. Its watershed covers an area of approximately 53.6 Km in the northern part of Dehradun city lies between 78^º30’ to 78^º15⁰’ longitude and 30^º15’ to 30^º 30’ latitude in top sheet No is 1/3. The area is covered in IRS - IC Pan of 13 Jan 1998 and LISS-III of 7 March 1997.

The Doon Valley is enriched with numerous seasonal and perennial streams. Which forms the lifetime or the inhabitants . The Rispana river is the part of the Ganga system of Drainage of the valley. The river originates from the Mussoorie hills, which are full of natural springs. The droplets from the springs collect and form numerous streamlets and these streamlets are joined to be these and they form the famous Shekhar Falls (north of Shahanshai Ashram about 5 Km away). Then the Rispana flows along Rajpur road over the Doon Gravels and then river passes through the tiny hamlets Nalapani, Raipur, Chanderroad, Defence colony, Amwala, Tapowan, Dandadhoran Adohiwala, Dalanwala, Gujram, Ajabpur and finally its contribute the water to the suswa River which intern joins the Ganga.

Introduction

The Himalayan Moutains that is relatively a younger formation and geologically a very complex occupies most of the Arunachal Pradesh. The mountain terrain covers an area of about 86000 sq. km with elevation ranging from 400 to 6000 m above mean sea level (Satapathy and Dutta 1999). The wet tropical and sub-tropical climate which prevails in most part of the Arunachal Pradesh, there is usual phenomenon of erosion and land degradation by the action of water. It is estimated by the application of USLE for Arunachal Pradesh that the total amount of about 669.35 million tones of soil is eroded annually with an average rate of 90.7 tonnes /ha/year (Singh, 1999).

Arunachal Pradesh falls under upper Brahamaputra river system constituted by 10 major river basins. They are Tawang, Kameng, Dikrong, Subansiri, Siang, Sesseri, Dibang-Tellu, and Tirap-Tiso. In Arunachal Pradesh, Dikrong river is named after joining of two main rivers Pachin and Para . In the catchments of Dikrong river light textured unstable soils with the prevalent practice of Jhum Cultivation makes the entire catchments susceptible to erosion. In every monsoon the river Dilrong carries tremendous amount of silt, gravel, small boulder and causes flood in some parts of the catchments susceptible to erosion. Singh (1999) observed that loss rate through Dikrong River was 100.98 tones/ha/year. This indicates serious threat to soil resources and there is need for urgent treatment for sediment control in Dikrong river bash.

Introduction

Water preceded all forms of life on earth and is believed to be the very origin of all organic life forms. For ages water was forming oceans, separating landmasses and shaping the terrain. It further influenced the emerging atmosphere of the young planet. The first organism formed and began to evolve in the primeval oceans. Mankind entered into the scene several million years later. The history is rather too long and infinitely complex. Variety of models with different degrees of certitude and consensus attempt to cogently explain what could have happened. But in spite of all the differences on the course of evolution, there is a universal consensus that water played a decisive role in the changes.

Across the globe, mankind managed to establish different civilizations with dissimilar cultural and material advancements much later. But then invariably all civilizations considered water holy and water bodies were sacred places. Holy wells, springs, rivers, cenotaphs were held in awe all through human history. The mysterious properties of water are studied from time immemorial. And water indeed is a strange compound! Availability of water for consumption and agriculture has determined the zenith and nadir of surviving and extinct civilizations.

Ancient Indian temples as part of design, have a prominent sacred well or a pond with an associated purana/myth narrating the mystical properties of the theertha / waterbody. It is still is a living tradition. In the west wishing wells survive from remote antiquity.

Introduction

The science of hydrogeology is defined as hydrology with emphasis on geology. This chapter is to refresh your geology knowledge. The key words are highlighted to assist a quick review.

The Crust and its Composition

The thin outermost layer of the earth is called the crust and ranges in thickness from about 8 km under the oceans to about 25 km on land. It extends under both oceans and continents, and forms the source for all the soils, vegetation, and gases in the atmosphere.

The crust is primarily composed of two elements: silicon and oxygen which account for 75% of the earth’s crust. Note that these are the two elements found in quartz (e.g., sand), which suggests this is the most common of all minerals.

Introduction

Groundwater investigation has a long history. In the past a waterman in the village would walk around the investigation area with a Y shaped wooden fork and identify the location for digging the wells. Certain trees and organic landforms like termite mounds were considered as indicators. The native intelligence of local topography should have played a role in identifying potential location. Successful or otherwise the method can be said to lack scientific objectivity. The optimal groundwater surveying method is no doubt drilling. This method ensures that all necessary information is being brought up from the geological formations. However, in order to obtain a desired degree of information from the subsurface of an area, drilling alone is normally not a feasible alternative.

There are a number of efficient and inexpensive geophysical surveying methods available to the hydrogeologist. It is worth noting at this point that these are, without exception, indirect methods. This implies that no method measures directly what we are actually looking for. With geophysical surveys, the target features are therefore invariably associated features. This implies that unless we understand the water context of these features, our geophysical surveys will be less than meaningful.

Objective methods of investigating groundwater are discussed in this chapter.

Introduction

Normally, water is a liquid substance made of molecules containing one atom of oxygen and two atoms of hydrogen (H₂O). Pure water has no colour, no taste, no smell, turns to a solid at 0°C and a vapour at 100°C. Its density is 1 gram per cubic centimetre (1 g/cm₃), and it is an extremely good solvent.

An extraordinary property of water is its ability to dissolve other substances. There is hardly a substance known which has not been identified in solution in the earth's waters. Were it not for the solvent property of water, life could not exist because water transfers nutrients vital to life in animals and plants.

A drop of rain water falling through the air dissolves atmospheric gases. When rain reaches the earth, it affects the quality of the land, lakes and rivers.

Introduction

Large scale exploitation of groundwater using modern deep well boring technology and powerful pumps is the order of the day in India and elsewhere. Increase in agriculture area and year around cultivation of water intensive crops, frequently failing monsoons (Fig.5.1) all have led to drying up of surface water and increased dependence on groundwater.

Thus, given the scenario of over exploitation of the available groundwater, it is essential that proper storage and management of available groundwater resources be identified.

Introduction

Wells are vertical shafts excavated or holes drilled in earth to the level of water table for extraction. Digging of wells is an age old practice. Shallow dug wells supported communities in the past. Well water is drawn to the ground manually or mechanically using variety of containers made of metal, leather, canvass and wood or a combination of them. Draught animals or electrical power are used to draw water for irrigation.

Water table (Fig.6.1) wells extend below the groundwater table and extract free water. Pumping water from these wells lowers the water level. The well first gains water from the water bearing material in its immediate proximity. Subsequently a cone of depression is formed in the immediate vicinity of the well. Water outside the cone of depression but with in the area of influence is diverted to replace the body of groundwater finding its way in to pumping well.

Introduction

The need for water for human consumption and the industry keeps spiraling up in the cities in the wake of rural diaspora and urban sprawl. Groundwater is exploited at an unsustainable rate leading to depletion of aquifers. Worse still is the intrusion of salt water from adjoining coast into the aquifers leading to total wastage of remaining water.

Introduction

Fresh water, a renewable but not an infinite resource, is becoming increasingly scarce. The amount available for use to the world today is almost the same as it was 4500 years ago but global demand has been increasing exponentially. Since 1950, the renewable supply per person has fallen 58 percent as world population has swelled from 2.5 billion to 6 billion. Moreover, unlike oil and most other strategic resources, fresh water has no substitute in most of its uses. It is essential for growing food, manufacturing goods, and safeguarding human health.

According to a World Policy Forum report, the largest and most combustible imbalance between population and available water supplies will be in Asia, where crop production depends heavily on irrigation. Asia today has roughly 60 percent of the world’s people but only 36 percent of the world’s renewable fresh water. China, India, Iran, and Pakistan are among the countries where a significant share of the irrigated land is now jeopardized by groundwater depletion, scarce river water, a fertility-sapping buildup of salts in the soil, or some combination of these factors. Groundwater depletion alone places 10 to 20 percent of grain production in both China and India at risk.

Introduction

All models are but approximations of reality. When we approximate there is always room for uncertainty. The preference of a particular model over the other is the relative degree of uncertainty acceptable to the objective and budget of the study. With the advent of computers, hosts of modeling software promising a lot to the researcher have arrived on the horizon. It is not in the scope of the book to enumerate all the techniques of hydrogeological modeling. Physical modeling using sand tanks was the earliest attempted modeling technique, about 107 years ago. Most recent and significant modeling technique practiced by many in groundwater potential identification is Geographic Information System (GIS) based modeling. After a brief treatment of physical models, concepts of mathematical models and GIS modeling are elaborated. The modeling techniques have involved mathematics and or software specific instructions. Hence it is recommended that relevant text books for individual techniques be referred. This chapter deals more on modeling concepts.

John William Harshberger codified ethnobotany as ‘the study of plants used by primitive and aboriginal people ‘in a popular lecture on 4 December 1895. Later it was published in the Botanical Gazette in 1896 and now he is regarded as “Father of Ethnobotany”. Subsequently, Walter Fewkes (1896) adopted the word ethnobotany after Harshberger for the title of a research paper. Another term ‘Arboriginal Botany’ coined by Steven Powers (1873- 1875) was in use for about two decades before Harsh Berger. In brief, “Ethnobotany is the study of interrelations between primitive human cultures and the plants and animals in its environment, which is regarded as the branch of ethnobiology”. There are some other definitions of ethnobotany by various authors:

Jones (1941) defined as “Ethnobotany is the study of interrelationship between man and vegetation”.

Faulks (1958) considered it as “The total relationship between man and vegetation” in his book entitled “An Introduction to Ethnobotany” It was the first book specially published on ethnobotany. Schultes (1962) explained as “Ethnobotany is the study of relationships which exist between people of a primitive society and their plant environment”. Gadgil and Vartak (1976) considered it as “Branch of economic botany which deals with the role of plants in life and culture of arboriginals and tribal people”. Alcorn (1984) states “It is the study of contextualized plant use”. Wickens (1990) defined ethnobotany as “The study of useful plants prior to their commercial exploitation and eventual domestication”. According to Ford 1994, ethnobotany is concerned with a wide range of interest of plants in cultural and ecological context as men in his edited book “The Nature and Status of Ethnobotany”. According to Martin 1995, ethnobotany is the part of ethnoecology, which concerns plants. Turner 1996 was given the appropriate definition “the science of people’s interaction with plants”. In context of Indian ethnobotany the first book published by Jain, S.K., 1981 entitled “Glimpses of Indian Ethnobotany” and Dr. Jain (2001) defined ethnobotany as “It deals with the study of total natural and traditional interrelationship between man and plants and his environment”.

In the starting of twentieth century, the ethnobotany progressed from the untested compilation of knowledge to a bigger method and abstract reorientation. Nowadays, the ethnobotany practices need a spread of skills such as:

• Training on the identification and preservation of plant specimens
• Training on linguistic and sociology to understand local language and their family structure
• Training on the psychology and cultural or traditional about plants
• Training on pharmecology and medicobotany

Ethnobotanists interact in a very broad array of analysis queries and practices, that don’t lend themselves to straightforward categorization. However, the subsequent headings arrange to describe a number of the key areas of recent ethnobotanical study.

Indigenous culture

Indigenous means originating where it is found. If knowledge originates from, and is bound to local experiences, taking its local world not perhaps as the only one, but as the most relevant of all they know may be called indigenous. Indigenous knowledge is human lifeexperience in a distinct natural and cultural amalgamation within a unique local and timely setting. It is an authentic appropriation of being, meaning that this very process happens exclusively in a given locality at a given time. In the field of medicine, Chinese culture (indigenous) developed Acupuncture technique. An acupunturist places needles into the skin to balance out the flow of chi which is believed to be the energy that flows through the human body. In theory, Chi runs along 14 pathways called meridains and when a patient is injured, stressed, or ill, their chi is supposedly being blocked. By placing needles in the Meridians the patients chi is thought to be put back into balance. Like Chinese culture, indigenous culture of different places/countries occurs and have their own belief and methods.

Indigenous cultures speak in various ways, for example we could speak from the perspective of our so-called ‘civilizations’ but how do we know that this perception is not contrary to the truth. We could speak on the basis of our traditional religious concepts but again these concepts may in reality be the opposite of what we believe. If we speak about the indigenous from the point of view of an anthropologist we arrive at a cold and empty language, a study that only pays attention to external and superficial matters, in the same way an anatomist analyses our inner organs or our bones but they are still a long way from knowing the reality. We believe that it is better to speak about indigenous cultures on the basis of their own reality, in relation to how they were as much as how they are now because in the course of time from yesterday to today many things have happened that are worth examining.

Before carry out any ethnobotanical work, first define the goal of the assignment or study before selecting the approach, which best suits the interests, budget and schedule. Most of the methods used in ethnobotanical studies are time taking and costly because several field trips are required in several seasons for covering different ritual occasions and seasonal farming activities which are continue for a number of years for completion of an assignment. In this way, an assignment may be very long or short as per selection approach of an ethnobotanist. Long-term assignment or projects may be continue for several years and they require sufficient financial input. When sufficient financial add and time does not available to accomplished long term assignments, in that case a Rapid Ethnobotanical Appraisal (REA) can be done.

Plants have played an important role in many mythologies and religions of the world and have been known for deep and sacred meanings throughout the ages. It is the symbolic representation of the old cultural traditions in the form of a tree across the world. Christmas tree in the Christianity and Bodhi tree in Buddhism are the example of tree featured in mythology. In most of the folklore, folktales and folk religion trees are often said to be homes of tree sprits. If history is traced, we will found that Druidism and Germanic paganism appear to have involved in religious conservational practices of sacred groves. Druidism is a nature based religion that was taught by Druids about 2000 years ago. The term druid itself possibly derives from the religeous word for oak. Therefore, the Druidism reconnects us with nature, our ancesters and ourselves by working with plants or trees.

Trees are honored in Indian culture for their different beneficial characters like medicinal properties, food, fodder, maintaining hydrological cycle, moderate the climate etc. There are some trees that have attained more than a special benevolence in Hindu mythology. In Indian mythology number of plants have been given sacred value and worshipped by different cultures. Some important plants of sacred value have been discussed here.

India, the land of oldest civilization known through out the world for its vibrant cultures, faiths, lifestyle, traditions, rituals etc. which are interwoven with each other since time immemoral. Here people of different ethnic groups live together who speak different languages and dialects according to their religion and choice. Altogether, 68 million inhabitants belonging to 227 ethnic groups, comprising of 573 tribal communities exists in different part of the country. These people constitute 8.08% of the total population of India (1991 Census of India) and speaks <750 dialects that can be classified into one of the following three language families: Austro-Asiatic (AA), Dravidian (DR), and Tibeto-Burman (TB). When come to think of different tribal community’s inhabiting India, they can be easily divided into six major racial lineages i.e. - Negroid, Mongoloid, Proto-Australoid/ Austrics, Mediterranean or Dravidian, West Brachycephals and Nordic Aryans

Major Families

This chapeter deals with indigenous knowledge on use of various plant species in traditional medicine, food, dye, wood and in tanning etc.

Malvaceae

The family Malvaceae is also known as Mallow family, characterised by mainly shrubs and herbs. The plants of this family frequent have stellate trichomes, persistant sepals, epicalyx present, stamens numerous and monadelphous, anthers monothecous, carpels 5 or more.

Abroma angusta (Devil’s Cotton)

Paste of the leaf is applied to heal wounds and to relieve joint pain or back pain. Young shoots are used as food. Roots are used to cure itching.

Abutilon indicum (Kanghi)

The whole plant is used to make brooms. Plant also has medicinal value and its sap is used against ulcer, leprosy, piles, dysentery and fever.

Introduction

Impact assessment is the process of identifying the future consequences of a current or proposed action. It is used to ensure that projects, programmes and policies are economically viable, socially equitable and environmentally sustainable. Programme Monitoring and Evaluation (PME) efforts are critical issues in management of agricultural research and development (R & D). In times of fiscal constraint, more emphasis is placed on accountability and programme effectiveness. As a management tool, PME is an integrated approach that incorporates the viewpoints of clientele, policy-makers, researchers and donors to address the intended goals. Public and private support to research will depend largely on efficiency issues and ability to reckon with multiple objectives, ranging from food security to sustainability, poverty alleviation, gender issues, export, etc. The PME of agricultural R & D projects is critical when the intended R&D has multiple outcomes. Monitoring and evaluation (M&E) of development activities provides government officials, development managers, and civil society with better means for learning from past experience, improving service delivery, planning and allocating resources, and demonstrating results as part of accountability to key stakeholders (World Bank, 2004).

Introduction

The acute food shortage was a major challenge in confronting the development of the country after independence with rapidly increasing population. Massive financial assistance of credit and subsidy under various rural development programmes unveiled by government could not yield desired impact on poverty and unemployment. The benefits of farm research did not reach the resource poor farmers. Several researchers indicated that the devolution of democratic decision-making at the village level was lacking.

The major task of bridging the gap between farmers and the scientific knowledge is in the hands of extension workers who should act as “conveyer belts” in communicating appropriate scientific knowledge and skills already available to the farmer in a smooth and acceptable form and in securing the adoption of these improved techniques. They must assess the intentions prevailing in the minds of rural people, their relationships and interactions, their groups, their institutions, their organizations and the culture, which influence the behaviour at large. They need to understand their motives, reactions, receptivity to new ideas, hidden resources of rural people and social and cultural obstacles prevailing in the society with their active participation.

To elucidate the hidden facts from the well-knit social, cultural and behavioral patterns, a family of approach known as “Participatory Rural Appraisal (PRA)” techniques is widely employed to understand the existing farming situations, problems, and opportunities in the rural areas. PRA techniques can also be used in evaluation and impact assessment in agricultural and allied enterprises and projects that can indicate the success and failure to plan for better future.

Logical Framework Approach (LFA) is a framework for designing change process, monitoring progress and evaluating impact. It is a powerful tool for project design, management, assessment, follow up and evaluation of projects. In designing change process, monitoring progress and evaluating impact, ordering the change process in a logical sequence where inputs or resources identify as necessary means for performing activities are very important. Specific activities are then identified because they result in outputs which are necessary to achieve objectives. The two terms i.e.; log frame and logical framework approach are sometimes confused by many. The log frame is a document whereas the logical framework approach is a project design methodology. LFA originally developed by the American Defense Department and was first formally adopted as a planning tool for United State Agency for International Development (USAID) by the end of 1960’s and today it is being used, in one form or other and with different names, by major organisations in the field of development co-operation and private industry. Among these are British DFID, the OECD expert group on Aid Evaluation, ISNAR International Service for National Agricultural Research, Germany’s GTZ and the Inter-American Development Bank. It has also been widely adopted by NGOs, though not without reservations and concerns by some. In the 1990s it was often mandatory for aid organisations to use the LFA in their project proposals.

Introduction

Pulse production in India has fluctuated widely with no long-term trend, leading to a steady decline in per capita availability per day, i.e. from 60.7 grams to 33.40 grams during 1951 to 2001, while its average requirement is about 65 gram per day per head. The pulses used to serve a low cost food to meet the protein requirement of a large sector of people in India. But, the pulses are becoming out of reach for the common people of country because of its continuing shoring prices. A Technology Mission on Pulse production was launched by Government of India in 1986-87 as a special drive to increase the pulse production in the country. The vision of Technology Mission of Pulse is attaining self reliance in pulses for household nutritional security and sustainability of the production system. The mission statement was to increase Pulse production from existing (IX plan) 131.4 lakh tonnes to 162 lakh tonnes; Productivity from 594 kg/ha to 702 kg/ha and per capita availability of pulses from 35 g to 40 g per day at affordable price. Unfortunately, the country has not been able to achieve self-sufficiency in the pulse production. During the last 40 years, the acreage under pulse crops and its production remained almost between 21-24 million hectares and 10-15 million tonnes, respectively. Consequently, the country has had to depend on import of pulses every year to meet the part of its shortage. The National Commission of Agriculture had estimated that the country should plan to produce about 25 million tonnes of pulses by the end of 2000, but we could achieve only about 14 million tonnes. Presently, the area and the production of pulse crops account for about 18.50 and 7.20 per cent (2003-04) of total area under foodgrains and total food grains production in the country, respectively.

Introduction

Research and development (R&D) is one of the main components to tackle the problems persisting or likely to take place in future. Priority areas of research are depending upon the overall situation and requirements of the problem under consideration. Under these broad areas, topic of interest for research may be varying at different geographical level from household to nation or global. If it is addressing vast geographical area like states, nations, regions and/or global, there may be many individuals/groups/institutions are working over similar type of problems. With the growing communication facilities and rising fund requirements, collaborative research programmes emerged to provide effective and economic solution to the problem with respect to time, money and manpower etc. Earlier, it was limited to high priority areas like defense and long run planning of the nations or kingdom at nation or state level. Declining environmental conditions and biological diversity became global concern in seventh decade of twentieth century. To tackle this problem, The United Nations Conference on the Human Environment (Stockholm) resolved to establish the United Nations Environment Programme (UNEP) in 1972. Further, to speed up the progress, global community through world leaders had identified two burning priority areas during conference United Nations (U N) Environmental Programme Rio de Janeiro, Brazil in 1992, well known as Earth Summit. One of those two priority areas was Biological Diversity. To address the issues at global levels, The Convention on Biological Diversity was signed by party nations, which was later ratified by the 187 countries. India is also one of the signatory nations and need to fulfill some time bound commitments. Moreover, later, importance of biodiversity and germplasm has been underlined by different forum at regional and global level for its present and future values in the life of human kind. Countries and various geographical regions are now becoming more and more aware about its judicious exploitation, conservation and sustained higher output over period of time.

Introduction

With the advent of modern agricultural technology, especially during the period of the Green Revolution in the late sixties and early seventies, there was a continuous surge for diversified agriculture, primarily on economic considerations. The changes in cropping pattern, however, are the outcome of interactive effect of many factors which can be broadly categorized into the following five groups-

Resource related factors like irrigation, rainfall and soil fertility.

Technology related factors viz. seed, fertilizer, and water technologies on one hand and marketing, storage and processing on the other.

Household related factors like food and fodder requirement as well as investment capacity of the farmers.

Price related factors covering input and output prices and economic policies that affect these prices.

Institutional and infrastructure related factors pertaining to farm size and tenancy arrangements, research, extension and marketing systems and government regulatory policies.

Introduction

The Andaman and Nicobar Islands popularly known as the Bay Islands are situated 1200 Km away from Indian mainland and are well known for their wide range of biodiversity.The dreaded tsunami hit the island on 26th December, 2004 and it destroyed livelihood of thousands of people. CARI on a limited scale initiated process of restoration of livelihood by technological interventions with generous funding by DBT under project entitled “Integrated Rehabilitation of tsunami affected people through technological intervention in the Andaman & Nicobar Islands” in the adopted villages of Manjeri, Manglutan and Guptapara. (Three situations). A total 56 ha has been affected by tsunami in the adopted villages. Following three situations occurred after tsunami and for each situation appropriate technological interventions were taken up.

Introduction

Cashew is an important horticultural crop. It has gained status of commercial crop from that of a forest component through technological advancements with respect to propagation, production and management. This has been possible as a result of increasing demand for raw cashew nuts and enhanced interest for its commercialization. The demand is mainly due to its good quality protein, unsaturated free fatty acids, rich blend of minerals and water-soluble vitamins, which altogether contribute an excellent dietary supplement. It is being cultivated by as many as 28 countries in Asia, Africa and Latin America

Introduction

Fisheries sector, a sunrise sector in India, has recorded a faster growth than that of crop and livestock sectors (Kumar et al., 2006). The sector contributes to the livelihood of a large section of economically-underprivileged population of the country. It has been recognized as a powerful income and employment generator as it stimulates growth of a number of subsidiary industries and is a source of cheap and nutritious food besides being a foreign exchange earner (Ayyappan and Krishnan, 2004).

With the changing composition pattern, emerging market forces and technological developments, it has assumed added importance in India. It is undergoing rapid transformation and the policy support, production strategies, public investment in infrastructure, and research and extension for fisheries have significantly contributed to the increased fish production. Particularly, after the mid-1980s, the development of carp polyculture technology has completely transformed the tradition backyard activity into a booming commercial enterprise. The aquaculture in the East Godavari delta region prospered with good yields and export driven demand. The paddy belt of the area rapidly converted into aquaculture hotspot owing to high economic benefits. But in recent years the dwindling of aquaculture and frequent losses caused and forced the farmers to withdraw from the once profit driven occupation. Apart from economic analysis, the motive behind this investigation is to find the efficiency of the farmers and the determinants. This will be useful in finding the lacunae in existing system of culture and will address necessities for shifting to new alternative.

Introduction

Aquaculture has developed quickly over the last three decades to turn into important economic activity world wide. It has been attracting heavy investment due to the availability of sound technologies and limitless potential for export especially shrimp. There are several forecasts on demand for aquatic foods and it is expected that it will be 183 million tonnes by 2030. As the capture fishery production is stagnating at around 90 million tonnes, aquaculture is seen as the only alternative to bridge the widening gap in demand and supply. Globally, Landings from worldwide aquaculture has increased 10-15 % per year in the last two decades and this growth was due to the combined effects of scientific farming, availability of infrastructure facilities, changing consumer preferences and export market potential to developed countries.

Shrimp farming is relatively new and its introduction on a commercial scale can be traced to the early seventies. Despite the recent introduction, one third of the world shrimp production is from farmed shrimp. The shrimp producing countries are found in all regions based on FAO statistics including Europe and Middle East. The major to five shrimp producing countries are China, Thailand, Vietnam, Indonesia, and India. The future increase in world aquaculture production will be driven by China with South Africa, Latin America, the Caribbean and the Europe providing small increases.

Introduction

Mangroves are the special group of plants or the ecosystem in a holistic scence on the inter-tidal coastal areas, edges of the islands and major estuarine mouths. The frequently tidal inundated forests on coastal areas, wetlands and the inter-tidal zones of sheltered bays or shore lines, estuarine mouths, sides of the tidal creeks, backwater, lagoons, marshes and mud-flats of the tropical and sub-tropical regions of the Globe are the major mangrove habitats or zones. Mangrove ecosystem form an important ecological asset and economic resources of the coastal marine environment. These mangrove ecosystem is the most productive ecosystem, which can efficiently fertilize the sea and estuarine water and also physically protect the coastal zone, estuarine mouth from frequent natural calamities and vitally serves as the breeding ground, nursery and grazing place of diverse species of fish, shrimps, prawns, crabs and vast group of other marine and off-shore species.

Introduction

Water hyacinth, Eichhornia crassipes, is such an aquatic plant that needs hardly any introduction. This aquatic plant is considered as nuisance weed found floating freely on fresh water bodies, proliferates aggressively and therefore, spreads like wild fire. It can infest all types of water bodies, chokes waterways, canals, channels, dams, and thus damages potential water resources. Evidently, two plants produces 300 offspring within 23 days only and under ideal environment, 10 plants can multiply to 6 lakh and may cover an acre area within a period

ABSTRACT

Coastal aquaculture in India is synonymous with shrimp culture since shrimp has a pronounced presence among the basket of commodities produced in the sector. In coastal aquaculture, maximum area is under shrimp culture due to its high profitability, ready marketability, premium price and unlimited export demand. Since the growth of shrimp has showed significant fluctuations in terms of area, production and productivity over time, this paper aims to seek and use appropriate methodology for computation of growth rates. Accordingly, the present study utilized nonparametric regression method for computation of growth rates. Results indicated that the methodology has been successful in extracting required information from the data set. The analysis revealed that growth of Indian shrimp farming is largely governed by east coast states. Potentiality of west coast states remains grossly underexploited. Broad results also indicate that growth rate is higher in commercial shrimp farming states compared to traditional farming states. Shrimp farming being a livelihood option for small and marginal farmers of the deprived sections of the population of a developing country, like India, consistent yield is more important than substantial growth in yield in shrimp farming.

Introduction

Aquarium fish keeping has become increasingly popular in industrialized countries and has been rated as the second biggest hobby and the most popular type of pet (Oliver, 2001). The National Pet Owners Survey 2007-08 revealed that 142 million freshwater and 9.6 million salt water fish were kept as pet in the USA alone (APPMA, 2008). The growing interest in aquarium fish has resulted in steady increase in aquarium fish trade globally. Today, with a turn over of US $ 9.0 billion a year and an annual growth of 8.0%, production of ornamental fish is an important business activity as well as one of the most popular hobbies in the world (Yanar et al., 2008).

Introduction

The advancements in the field of informatics, biology and allied fields of technology led to the emergence of an inter-disciplinary field known as ‘Bioinformatics’ (Kumar 2006, Madhan Mohan 2006). Explosion of knowledge in the field of biology and generation of new information (data) needs collection, storage, organization, integration, analysis, simulation of biological data and a faster distribution among the scientific workers (Mehrotra et al. 2005). The advent of super computers, high speed computing and development of algorithms for data formatting, assists in the storage of data at the site of origin and distributed through the hyperlinks in world wide web (www).

The vast field of Bioinformatics is beyond the scope of this article. However to elucidate the concepts that led to the the development of Bioinformatics vis-à-vis is given in brief before explaining the new and emerging area of ‘fluxomics’.

Introduction

Technological advances of the past two decades have profoundly reshaped and enhanced all aspects of medical research and practice. Concepts, methodologies, tools, and applications of medical informatics with the latest technique and approaches are essential for every one pursuing in the medical IT field. Improvements in healthcare delivery in recent years are rooted in the continued industry-wide investment in information technology and the expanding role of medical informatics. The main goal of this chapter is to collate and provide innovative and creative ideas so far published on healthcare in one article for use by the researchers, practitioners and other related with health care system for improving communication environments in health and to explore all new technologies in medical informatics and health care delivery systems.

Medical Informatics can be defined as a discipline concerned with all aspects of understanding and promoting the effective organization, analysis, management, and use of information in health care (American Medical Informatics Association, 2007). In recent years, medical informatics has become a well-recognized branch of medicine.

Introduction

Developments in both hardware and software sectors of computer science raised high expectations and strong vision to solve number of problems in all sectors of economy. Introduction of personal computers (PC) in 1970’s created vision of paperless offices, simplified computing, automated process control, management information system, expert system etc. Initially, it had greater impact on agricultural research and development in developed countries in the form of Information and Communication Technology (ICT). Growth of companies with promises to provide specialist software to farmers and growers during 1980’s is a clear indicator of the high expectation and visualization of ICT in the field agricultural research and development. A review of agricultural software availability and use has been made by an international team in 1997 called FARMSOFT. This review covered on eight countries viz. Belgium, France, Germany, Israel, Italy, Portugal, Spain and The Netherlands. It was found that in 1996 out of 1315 software related to agriculture, 39% were in category of management, 26% were in category of animal husbandry, 8.9% in category of crop production, 7.0% in category of machinery and process control, 0.1% in category of irrigation and 19% in others category. Comparison of change in software inventory in 1996 with respect to 1994 revealed that there is around 15% growth in the agricultural software development. The higher positive growth was in the category of management software (38.40%) followed by animal husbandry (10.45%) and others (10.44%). However, highest negative growth was observed in the category of irrigation (-163.15%) followed by crop production (-53.85%) and machinery and process control (-30.95%). This indicates that overall agricultural software inventory was growing but while growth in the software related to agricultural management was sufficiently high, there was sharp decline in categories of irrigation and crop production. This change in pattern may be attributed to saturation of software and bottlenecks due to limitation of related technological innovations, socio-economic adoption and infrastructural facilities.

Introduction

At the very outset, the varied aspects which govern the agricultural scenario in India have been taken up. Basically, India is a land of diversity and Indian climate defies an easy generalization. It comprises a wide range of weather conditions prevailing across a large geographic scale existing in the midst of varied topography. A systematic analysis reveals that Indian climate can be partitioned into six major climatic subtypes, ranging from deserts in the west, to the alpine tundra and glaciers in the north, to humid tropical regions supporting rainforests in the southwest and the island territories. The landform pattern is also found to be widely varying over places. Interestingly, tIndian soils can be divided into six categories, namely, alluvial soils, regular soils, red soils, laterite soils, mountain soils as well as the desert soils. Being a populous country whose sixty percent of the population earns its livelihood on agro-based incomes, directly or indirectly, it is important to review the robustness of the system followed in the actual practice in the Indian scenario towards the process of raising crops which ultimately feed more than hundred crores population. The review reveals that the agricultural production and farm incomes in India are frequently affected by the natural disasters such as droughts, floods, cyclones, storms, landslides as well as the earthquakes, and, indeed, the susceptibility of Indian agriculture to these disasters is compounded by the outbreak of epidemics and man-made disasters such as fire, sale of spurious seeds, fertilizers and pesticides, price crashes etc. As a sequel, the farmers are severely affected through the loss of production of agricultural crops and consequently, the loss of farm income due to occurrence of such events, and it is no denying that the management of or coping with such factors remains beyond the control of the farmers.

Introduction

Programme for self-employment of the poor has been an important component of the anti-poverty programmes implemented through government initiatives in the rural areas in India. The Swarnjayanti Gram Swarozgar Yojana (SGSY) is the major ongoing programme for the self-employment of rural poor at present. The programme was started with effect from 01.04.1999 after restructuring of Integrated Rural Development Programme (IRDP), and allied programmes namely Training of Rural Youth for Self Employment (TRYSEM), Development of Women and Children in Rural Areas (DWCRA), Supply of Toolkits in Rural Areas (SITRA) and Ganga Kalyan Yojna (GKY) and Million Well Scheme (MWS). Govt. of Orissa have launched ‘Mission Shakti’ programme in 2001 with an aim to have at least three lakh WSHGs by the end of 2008. By the end of March 2008, 3.73 lakh WSHGs have been formed under Mission Shakti (Annon, 2007-08). SGSY has contributed substantially in carrying forward the Mission Shakti activities in the state. A study was conducted by the Center for Management and Development, Thiruvananthapuram for concurrent evaluation of the implementation of the SGSY. It was established that the performance of SGSY in Assam, M.P., Orissa, West Bengal and Bihar was the lowest among the major states (Anon, 2002-03). SGSY is implemented in a very deterministic and top down manner, ignoring the participatory approach that is envisaged in the design. Good governance for poverty alleviation programme seems to be more of rhetoric than reality (Shylendra and Bhirdikar, 2005). The Ministry of Rural Development, Govt. of India has set guidelines for successful implementation of the scheme within the framework of targets under each head. As per the guidelines, all the states are directed to fulfill the targets. After 10 years of implementation of the scheme, an evaluation of the programme in district level and state level is in dire need. Hence, it is attempted to evaluate the physical and financial achievement of the SGSY programme operated at Orissa.

In India, the agricultural research and technology generation are supported in five agro-ecosystems, viz. irrigated agro-ecosystem, arid agro-ecosystem, rain-fed agro-ecosystem, coastal agro-ecosystem and hill & mountainous agro-ecosystem. Each system with its varied socio-economic and agricultural features, demands appropriate technologies to augment the productivity of various enterprises with sustainable development and economic returns. Unfortunately, the conventional development efforts, which often follow “top-down” approaches in planning and implementation, don’t address the constraints and developmental potentials of farm household systems in a comprehensive way. To overcome these shortcomings, reversal of approach, i.e. from “Top down” to “Bottom up” is recommended. This can be achieved through site-specific assessment and refinement of technologies with farmer’s participation where the farmers of different agro-ecosystems have right to plan, implement and own their developmental projects (Johnkutty et al., 2001).

Abstract

Beautiful Earth is the only planet of Solar system which supports life due to presence of water, air and favourable temperature. The surface atmosphere is warmed by absorption of solar ray due to green house effect, without which the average temperature of Earth’s atmosphere would have been –73^ºC and the ocean would have been frozen. Since the year 1850, when industrialization started in many countries, the concentration of different green house gases in the atmosphere have been increased remarkably (CO₂ – 34%, CH₄ – 145%, Fluorocarbons – 100%). Global warming, the increase in the average temperature of the Earth’s near surface air and oceans, is caused mainly due to increase in air pollution, green house gas generation and deforestation. Human activities are found more responsible for rapid global warming in last 50 years. Deadly storms, unbearable heat waves, high day-night temperature, Ice sheet melting in polar regions, glaciers receding at alarming rate, frequent wild fires in forest, coastal areas inundation, drinking water shortage and desertification are the serious impacts of global warming. It is a great concern to the Policy Makers to stop human activities responsible for global warming without jeopardizing technological development of society. Global warming has triggered the complex chain reactions : Increase in surface temperature – reduction in the permafrost and tundra areas.

Abstract

The toxic materials like arsenic, barium, beryllium, cadmium, chromium, lead, mercury, etc. present in Electronic wastes, in short e-wastes are a great threat to mankind since these contaminate soil, water and air of the surroundings. These E- wastes are mainly defective or obsolete parts of computers, audio-visual systems and electronic & electrical machineries used in the houses, offices and factories. These carcinogenic or hazardous toxic materials are root cause of damage of different parts of human body, untimely death as well as health disaster. Every year the manufacturers and assemblers produce around 1200 tons of electronic scraps in India. Collection of computer wastes from developed countries by greedy Indian business people for sorting out in India aggravates the environmental pollution. ‘Reduce, Reuse and Recycle’ are three important principles to be followed by one and all (Manufacturers, Distributors, Sellers, Buyers to Users) for proper scientific management of electronic wastes. Reverse osmosis, Electrolysis, Condensation, Electrolytic recovery, Filtration, Centrifugation, etc. are some of the important e-waste management technologies used to reclaim different toxic materials. Buyback policy should be made compulsory since Manufacturers can afford to build up infrastructure for reusing and recycling electronic wastes.  More and more use of bio-based plastics, toners, glues, inks will reduce the environmental pollution considerably and save the mankind from extinction.

Abstract

Solid waste, the creation of human being, is taken today the shape of a Demon to kill its creator by polluting breathing air, drinking water and essential food materials. It spreads different infectious killer diseases if not disposed off timely. Municipal authorities are spending lakhs of rupees to collect and transport solid wastes to dump-yard. Presence of both biodegradable and non-biodegradable wastes together in dustbin makes the disposal problematic and Municipal workers handling solid wastes suffer injury and disease infections. Municipal authority can clear about 50 percent of solid wastes either by dumping in low lying areas or by burning in open places causing unwanted environmental pollutions. Incinerations with electric producing facility, pyrolysis, dumping in properly built concrete landfills, Pelletization are scientific techniques for solid waste management. But recycling as resource materials is the best economical approach. Since non-biodegradable wastes can be sold to scrap dwellers for further processing it offers income opportunity. Biodegradable wastes can be converted to good quality vermicompost, which is also a marketable product and fetch good income. Different activities during recycling of solid wastes offer employment opportunities to literate & illiterate, skilled & unskilled, male & female, young & old workers. The present ‘Treatment at the end of pipe’ approach is to be changed by ‘Treatment at source’ approach.

Abstract

Organic farming, the state - of - art technology of the present era in agricultural cultivation, is not new to India. Green revolution in last four decades of Twentieth Century made farmers more dependants on chemical fertilizers and chemical pesticides for harvesting highest crop yield but side by side increased environmental pollution as well as health hazards and reduced soil productivity by increasing nutrient imbalance in soil. Indian farmers have almost forgotten their century old practice of preparation of compost from farm wastes and its use in next cultivation for getting pollution free healthy food materials. This articles deals with the problems of chemical farming in Indian context and their solution through organic farming.

Abstract

Abundant organic wastes come from agriculture sector. Earthworms offer an opportunity for beneficial disposal of this unwanted material by converting into vermi compost, a national wealth. It is rich in nutrients, enzymes, hormones and beneficial microbes but free from harmful chemicals and pathogenic microorganisms, hence improves crop productivity. Disposal through burning creates environment pollution and loss of valuable plant nutrients. Dumping creates unhygienic situation. Vermicomposting is quicker than other conventional composting techniques. In northeast India, Eisenia foetida and Perionyx excavatus were found equally efficient in vermi composting of agricultural wastes. Among different bio mass, vegetable wastes and soft weeds were converted to compost very quickly by using Perionyx excavatus within 1 to 2 months. Composting was found moderate (3 to 4.5 months) in crop residues and hardy weeds while slow (5 to 10 months) in case of dry tree leaves. When different wastes are mixed together it takes 3.5 to 4.5 months for complete composting. Composting can be accelerated by mixing the wastes with cellulolytic fungi such as Triichoderma viride, Trichurus spiralis, Paecilomyces fusiporus and Aspergillus awamori. Vermicompost prepared from wastes is a marketable product. It can bring prosperity in the villages by means of employment generation and good income. Awareness among people can be created through training.