eChapters

Maintenance

When an animal is being fed for growth, fattening, milk secretion or other productive function, a considerable part of its feed is utilized for supporting body processes which are vital, irrespective of new tissue or product is being formed. This demand for feed is referred to as the “Maintenance requirement”; because it includes the amount needed to keep intact the tissues of animal which is not growing, working or yielding any product. There would be tissue break down with the accompanying loss in weight, leading to undesirable consequences, provided such need for feed is not met.

The fasting catabolism

The fasting animal doing no external work and not producing in any way is still carrying on a variety of internal physiological processes, which are absolutely vital for life. Obviouslythe nutrients required to support theseinternal activities must come from the break down of body tissue itself. This destruction of body tissue is termed as the “Fasting catabolism” and this can be measured in terms of the waste products discarded through the various paths of excretion.

Energy catabolism of fasting

The energy expended in the fasting animal is converted into heat, which can be measured in direct or indirect calorimeter. For measuring fasting catabolism at its minimumvalue, it becomes imperative to eliminate all the influences leading to increase heat production above the minimum expenditure compatible with the maintenance of life in so far as possible. Such a minimum value is called “Basal-metabolism” or BMR.Theconditions essential fora true minimumvalue of fasting catabolism can most nearly be attained in human being are specified as following :

The increase in size and weight of farm animals is the simplest manifestation. The life in the animals begins with a single cell weighing practically nothing, then grow to reach mature weights ranging from 1 kg to 800 kg or more for a bison. Fromconceptionto maturity, animalsgrowth canbe depicted bya sigmoid (S-shaped) graph :

Practically there may be deviation from above pattern due to environmental and nutritional features. Retardation of growth may be observed due to feed scarcity during cold or dry seasons. Vice-versa will happen when there is feed abundance. Intensivehusbandrygenerallyfollows sigmoid growthof animals. Whereas, idealized pattern of growth would be deviated in the growth rate of animals, whenreared undernatural (extensive) conditions;exhibitinginterrupted curves. While growing, development of various parts of the animal, defined as anatomical components (for example legs), as organs (for example liver) or as tissues (for example muscle) grow at different rates. By the time of maturity, the proportions of the animal changes. For example in cattle:

• At birth: Head is relatively large, 6.2 % of the body weight. • At body weight of 100 kg: Head is 4.5 % of body weight.

Biochemical and Physiological Role of Lactation is Tremendous

On a large scale, feed nutrients are converted into milk constituents by considerable biochemical and physiological processes. Ahigh yielder of dairy may produce five times dry matter in the milk, as is present in her own body, during a single lactation. Still there are records of cows, which have produced in a year’s milk over five times the organic matter of their own bodies. Certain other high yielders, which over a life time, have secreted organic matter in the milk equivalent to thirty five times that present in their own tissues. The noteworthy physiological performance is represented in the milk secretion of sownursinga largerlitter.Humanorganismiscapableofproducinganastonishing output of milk. Thefeed provides rawmaterials fromwhichthe milkconstituents are derived. Some of these milk components are synthesized in the udder, for which energy is supplied again byfeed. Therefore, the amount and composition of milk dictates feed requirement.

Ideas, materials, facilities, processes and labourare clubbed together to produce a worthwhile product-milksuccessfully and this may be the art and science of management. In otherwords, weput togethertheinputs-soil, labour, hay, fertility, silage into milk and such transformations are the result of a purposeful and pre-meditated action-management and not just by happenstance.

Decisionmaking role of dairy farm manager Manager of dairy farm decides :

• What to do !

• How to do !

• When to do !

For answeringtheabove, themanager mustplan to co-ordinate, organize, control and direct his supportive staff. For accomplishing his targets, the manager must gatherinformation about allresources available, applicationof newtechnologies, different options of market outlets and sources of capital credit needed. He should be able to establish targets to be achieved. Obstacles or ‘stumbling blocks’ are always there which hinder progress towards goals. Therefore, these have tobe identified.He shouldbe abletocomparealternative optionsof realizing targets, consideringtheeach one in terms of income potential, thecapital needed, the labour required. Then choosing the best plan of action and put that option into operation. The manager should be able to assume responsibility for the consequences of actions taken. Later, he should evaluate and measure results. His accomplishments maybe assessed in the light of standards of performance. Notonlythat, but alsoto keep a vigil on production level, labour efficiency, cost, investments etc. He must keep the operating system flexible so that he may take advantage of new developments to be applicable in his plans.

When we talk about importance of feed technology in relation to animal productivity, feed represents the major cost in animal production as follows -
Feed processing includes all operations necessary to achieve the maximum potential of nutritional value of a feed stuff. The process involves changing ingredients in such a manner as to maximize their natural value and the net returns from their use. Feed processing may be accomplished by Physical, Chemical, Thermal, Bacterial or other changes of a feed ingredient before it is fed. The primary reasons for processing feeds are to make changes in the moisture content, density of feed, particle size, palatability; or to make more profit, to improve nutrient availability, keeping quality; or to reduce storage -transportation space, cost, moulds, salmonella and other harmful substances. Detoxification of undesirable components because some feeds may contain toxic substances, theexcess consumption of whichmaycausedecreased nutritive value of the feeds or may injure some vital organs or even cause death. Some natural inhibitors in feedstuffs are as following :

Patients are unable to consume foods and fluids orally when they are suffering fromillness. Under surgical conditions, severe burns, severe infectious neonatal infants, congenital anomalies, anorexia, coma or dysfunction of elementary tract etc., special feeding methods should be used for feeding such patients.

Objectives

• To provide water and electrolytes to prevent dehydration and correct electrolyte imbalance.

• To make up the loss of tissue protein.

• To provide energy to meet the daily needs of the patients.

The nutrients used in intravenous feeding are :

a) Water and electrolytes : The daily minimum water requirement of an adult on anaverage is 1.5 liters.Additional waterwillbe requiredto correct dehydration that might have occurred before therapy. The water loss made up in about 24 hour and the urinary excretion restored to about 300-400 ml in every 8 hrs.

b) Carbohydrates and alcohol : Glucose, Fructose and Sorbitol are used in intravenous feeding. Three per cent alcohol @ 8 g/h can also be given; because this provides 7.1 kcal energy/ g. Glucose is usuallyadministered as 5 % solution. Fructoseis preferred to Glucose, as it can be administered at a concentration of 10-15 % without any adverse effect.

c) Amino acids : Solution form of Protein hydrolysates, Synthetic amino acid mixture and a mixture of L-amino acids are available for intravenous feeding. Protein hydrolysates prepared from casein, free from peptides and fortified withTryptophan are commonlyusedfor intravenous therapy.

d) Whole blood or plasma : One litre of whole blood provides about 180 gm proteins including haemoglobin. Blood is used mainly to combat circulatoryfailure andloss of bloodfrombody. One liter of plasma contain about 60-70 gm of protein. Plasma infusion is given as a measure for increasing plasma protein level when it is low.

e) Vitamins: All the vitamins (twice daily requirements) should be added to intravenous fluid to meet the daily needs of the patient.

Dog Feeding

In Asia, dogs are the main pet animal kept both by urban and rural families. They are very versatile and adopt to common food habbits of their masters. Most often, they are fed on the home cooked foods – bread, rice, vegetables, pulses, milk and non – vegetarian meals. Many processed pet foods are also available in the market in the form of “Dry biscuits” or in “Canned form”, which provide all the requirements for Energy, Protein, Vitamins, Minerals and some moisture. Like any other farm animal, dogs also require these nutrients for their maintenance and productive purposes like – Growth, Lactation, Gestation, draft [sledge – cart on the ice] etcetra. Dogs and humans have been companions from time immemorial and the first readymade dog food was marketed under the name - DOG CHOW CHEKER in the year 1926. Since then such dog – foods have gained popularity. Most of the dog foods are manufactured abroad and marketed in India by Multi – National Companies (MNCs). Following are the guide – lines for feeding :

1. Energysources: Cereal grains - Jowar, Bajra, Oat, Maize, Sorghum.Average requirement of energy 3000 k.cal / kg of feed.

2. Protein sources: Vegetative origin : verypoor in Essential Amino acids. e.g. Soybean, grams, peas [green proteins], beans, other legumes.

3. Fat: 10 % (oil seeds are good sources Protein as well as Fats).

4. Non – starch fibrous feeds (5 %): To tone – up Alimentary canal.

5. Feedsupplements:Additional nutrients:Greenvegetables (carotenoids), fruits, skimmed milk, curd, butter – milk.

6. Feed Additives: These are Non-nutrients: Mushroom, herbal preparations [no side effects by Aanwala, Aloe-veera].

Feeding wild animals in captivity presents a fearful challenge. There arehundreds of species to consider, each representing millions of years of evolutionary adaptation to particular ecological system.

Natural foods range from Ants to Antelopes. (Antelope = African (deer like) ruminant, forexample-gazelles, gnus, kudus and impala) and Mouth structures varyfromEdentate (toothless)toCarnassial(specialized pre-molars and molars).

Stomach : These may be

a) Single

b) Quadruple.

Intestines: These may be

a) Tube likeor

b) Equipped with a caecal fermentation vat (vat = large vessel).

On the surface, the problem appears unsolvable, … it certainly is not easy. But the need persists to nourish all captive species as appropriately as possible … it is not feasible to wait until a DATABASE is developed comparable with that which exists for domestic animals.Actually domestic animal data can be very useful for the estimation of nutrient needs of wild counterparts.

Carnivore [Carnivora]

Members of this family are mostly flesh-eaters and share features that show hunting lifestyle.

Limbs: These are very powerful, agile quick moving, very active.

Forward-facing eyes: These help in judging distance accurately.

Teeth: All have very strong canine teeth for cutting.

These molars … pre-molars function like shears to slice through flesh (meat).

One exception is the Giant Panda, which is almost-entirely Herbivore, although, most other members of carnivora family would supplement their diet with Vegetation, when necessary.

Pinnipeds [Marine mammals]

In some systems of classification, Pinnipeds are considered as members of Carnivora, for example, marine mammal – Elephant Seal.

Most pinnipeds are collected fromisolated island rookeries, shoelines or seaice. Use of a so – called “Wally” net is the most efficient means of collecting large Seals, such as above Elephant seal. Large transport - cage carries such big animal to shore.

The bio-degradation process dates back to time immemorial when some wild ruminant animals were spotted feeding on the tree –woods in South Chile. The natives of this place called this feed as “Palo Podrido (Huempe)”, meaning – ‘animal feed’, as opined by F. Zadrazilof Germany. Later on, it was found that thiswood was actuallydegradedbycertaintypes offungi undernatural conditions and decomposed to Spent-wood, which turned out to be the animal feed. The scientists started working on these fungi as well as this type of process. Lately, the fungi were found to be belonging to higher basidiomycetes class, called: White-rot-fungi. They mainly degraded lignin of the wood, however cellulose and hemicelluloses to a limited extent only.

But, surprisingly it was found that the digestibility and crude protein content increased to a considerable extent. Later on, the scientists started working on spent-straws too. The cereal straws (lignocellulosics) constituted a staple-feed (basal) in the developingcountries for theseruminantanimals. But, thepresence of lignin (a biological plastic) limits the utilization of these cereal straws in the rumen eco-system. Thus, the concept of SolidState Fermentation (SSF) sparked into this type of investigation. Some examples of such white-rot-fungi were: Pleurotus ostreatus, Coprinus cineus, Sporotrichum thermophile, Phanerochaete chrysosporium, Polyporous berkeleyi, Neurospora crssa, Alternaria tenius to name a few. Some examples of substrates upon which such types of fungi grew for SSF were: wheat straw, paddy straw, paddy husks, ground nut shells, sugarcane bagasse, barleystraw, sunflower stalk, aspen wood, birch wood, saw dust etc. The resurgence of interest in the use of straw from cereal and grain crops as animal feed had been witnessed in early nineties to maintain the performance of animals. Following were some of the variations undertaken by different scientific groups:

Sincehundreds ofyears, Livestockanimals arean integralpart ofcrop–livestock system. In the life style of Indian people, livestock had always been given a special and respectful place and this will continue in the years to come. Despite considerable deficit of feeds, the above may be one of the reasons of steadily increasing livestock production in our country. Almost all assessments made during the past eight decades, have shown deficits of different orders in respect of following for the availability of :

• Dry fodders

• Green fodders and

• Concentrates

Such surprising phenomenon is inviting our attention for reviewing systems of assessment for finding out the status of consumption and the gap between the above. Production of milk, meat, fibre, chicken and eggis increasing, though. Therefore, there is gap between the availability and requirements of different feeds. Because India is facing shortage of both protein and energy rich animal feeds, a large number of agro – forest based unconventional by products have been used. Some of these feeds were found to be promising, while others affected the performance of the animals, due to presence of incriminatingfactors present in them. But after detoxification, these feeds were suitable for animal feeding. Some of these feeds are :

Gas Chromatography (GC) was discovered in 1954, a verysensitive technique, whichpavedwaytothisworldfor the resolution ofthe sampleleadingtodetection … identification of the minutest quantity of the desired sample.

Fattyacids were usuallyconverted into correspondingmethyl esters (FAME) to improve volatility and to reduce peak tailing for GC. Usually, FAME could be conveniently prepared by heating lipids with a large excess of either acid- or base-catalyzed reagents. Whereas, acid-catalyzed reagents form FAME from both free fatty acids (FFA) and O-acyl lipids base-catalyzed reagents caused only transesterification, i.e. conversion of O-acyl lipids to FAME and do not usually form FAME from FFAs. A base-catalyzed reaction was a useful alternative to acid-catalyzedreactions whena lipid sample contained acid-labile FAs such as propenoids, present in seed oils from the Malvales order, such as cottonseedoil. To effect solublizationof nonpolarlipids such as triacylglycerols in methanol. the predominant solvent in derivatization reagents, benzene was frequentlyadded to the derivatizalion reaction mixture. However, due to health concerns, use of benzene was discouraged. To help solubilize nonpolar lipids, methylene chloride and tetrahydrofuran had been used in place of benzene.

A premixisa mixtureofvitamins, trace minerals, medicaments, feedsupplements and diluents either individually or in a combination. It is a value added solution for feeds with sustainable safety and quality.

The main objective of premixes is to deliver the micro-ingredients in a manner desired by customer. These blends of Micro-ingredients need to be carefully selected, analysed and homogenously manufactured in controlled conditions.

Good quality premixes are manufactured as per following four fundamental principles that determine premix quality and performance :

1. Understanding the chemical and physical attributes in the microingredient to be incorporated.

2. Testing to ensure that all microingredients meet specifications.

3. Controllingthe inclusionin fullproof and secure method.

4. Blending together in speciality mixers to achieve a homogenous mix.

This procedure allows us to mix two feed stuffs with different nutrient concentrations and come up with a mixture of the desired total concentration. For this square to work, the desired diet nutrient concentration must be between the nutrient concentrations of the two feed stuffs as well as in the same unit. The procedure can be used for Crude Protein, Energy, Minerals and so on and so forth.Also, in place of percentage, calories, parts per million/ billion / trillion and other units of measurement can be used.

Double Pearson Square Method

Sometimes, we might want to have the exact amounts of two major nutrients such as - Crude Protein and Energy.

For example, suppose we want a final mixture with 12 % Crude Protein (CP) and 74 % Total Digestible Nutrient (T.D.N.). We have :

A mill is a device that breaks solid materials into smaller pieces by grinding, crushing, or cutting. Such communition is an important unit operation in many processes. There are manydifferent types of mills and manytypes of materials processed in them. Historically, mills were powered by hand (e.g., via hand cranks) working animals (horsemill), wind (wind mill) or water (watermill). Today they are usually powered by electricity and are controlled by computer (automatic mills).

The grinding of solid matters occurs under exposure of mechanical forces that trench the structure by overcoming of the interior bonding forces. After the grinding, thestate ofthesolid is changed:thegrain size, thegrain size disposition and the grain shape.

Milling also refers to the process of breaking down, separating, sizing, or classifyingaggregatematerial. For instance rock crushingor grindingto produce uniform aggregate size for construction purposes, or separation of rock, soil or aggregatematerialforthe purposesofstructural fillor land reclamationactivities. Aggregate milling processes are also used to remove or separate contamination or moisture from aggregate or soil and to produce “dry fills” prior to transport or structuralfilling.

Grinding may serve the following purposes in engineering: • Increase of the surface area of a solid

• Manufacturing of a solid with a desired grain size

Introduction

First feed mill was established in 1875 A.D. in the state of Illinois, U.S.A. for calf meal production.

First feed mill in India was established in Ludhiana, Punjab in 1969 A.D.

Introduction

• Objective of animal diet formulations to provide a palatable ration at minimumcost to meet nutritional and energyrequirements of the animal.

• To achieve this objective, it is important to have knowledge about the requirementsof specific nutrient ingredients and the nutrient composition of feeds, which are used to formulate the animal diet.

• Diet formulation is an important aspect to meet production and financial goals in the most economical way.

• A dietis called balanced if it providesenergyto meet lactation, production and specific level of health requirement.

• Economic as well as nutritional aspects should be considered while optimisingnutrient ingredients.

• These three factors are so intimately related to each other that cannot be separated during the process of feed formulation.

Preliminary Stages

• The first step in diet formulation is to define the objective of diet formulation. Depending on the objective of diet formulation (such as reproduction, lactation, live-stocketc.), requirementsfor nutrient ingredients are established

• This step includes individual units and overall requirement for diet ingredients. After defining the objective of study and diet formulation, requirements of nutrient intake are defined to achieve that objective

• While definingtherequirement, socialenvironment, internal, external and economical conditions should be taken into consideration.Nutrient requirements can be established by the empirical method and factorial method.

• The empiricalmethodisbasedonexperimental studies whereas the factorial method identifies the various functions within the animal that defines the needs of nutrient ingredients.

The Codex alimentarius is a collection of standards, codes of practice, guidelines and other recommendations relative to food.

It is derived from latin word which means Food Code.

Codex alimentarius is about safe, good food for everyone - everywhere.

International food trade has existed for thousands of years but until not too long agofood wasmainlyproduced, soldand consumed locally. Over the last century theamount offoodtraded internationallyhas grownexponentially, and a quantity and variety of food never before possible travels the globe today.

The CODEX ALIMENTARIUS international food standards, guidelines and codes of practice contribute to thesafety, qualityandfairnessof this international food trade. Consumers can trust the safety and quality of the food products theybuyand importers can trust that the food theyordered will be in accordance with their specifications.

Public concerns about food safety issues are often placing Codex at the centre of global debates. Biotechnology, pesticides, food additives and contaminants are some of the issues discussed in Codex meetings. Codex standards are based on the best available science assisted by independent international risk assessment bodies or ad-hoc consultations organized by FAO and WHO.

Historical Aspect

The primitive man during his long history as a hunter and food gatherer, used ruminants as food till about 6000 B.C. Later, he developed the arts of aerable -agriculture and animal husbandry. The ruminants played a major role as sources ofbothfoodandmechanicalwork. In turn, the new techniquesof foodproduction greatlyincreased the amount of food available and enabledthe establishment of settled communities.Theradicalnatureof thesedevelopments was clearlyshown by the fact that within a couple of millennia, manhad evolved from primitive to urbanized, civilized communities. Throughout the historical epochs, animal food - meat, milk and milk products continued to form an important fraction of the diet in most of the civilized societies. The favoured nature of these foods was well shown in the observation that, with increasing affluence, human -beings tended to increase the fraction of the diet provided by animal foods, especiallyfromruminants.

Since middle of twentieth century, evidences had been accumulating to indicate that the high intake of saturated fats from meat and ‘dairy products might play a role in the etiology of atherosclerosis. This concern had provided a stimulus to produce husbandrytechniquesleadingto the modification of the composition of ruminant fats as well as possibility of protecting dietary poly - unsaturated fatty acids (PUFA) from ruminal biohydrogenation in 1951. Scientists all the world round, started studying ruiminant fats and ruminal lipid metabolism in this perspective. Different research groups developed various techniques of protectingdietary- PUFA, so as to make themavailable in the meat, milk and its products, but lacked the availability of sensitive techniques for confirmation. With the discovery of Gas Chromatoaraphy (GC) in 1954, a new beginning of resolution and detection of PUFA started with gradual precision. Later on, the GC was further equipped with mass - spectroscopy and subsequently with infra -red detector. The scientists were very much successful in protecting the dietary essential fatty acids (E.F.A.s) or even by - passing them from biohydrogenation in vitro.

Chemistry of Alkanes

In living plants, hydrocarbons are universally distributed in the waxy coatings on leaves and other plant organs. Alkane fraction is commonly a mixture of hydrocarbons of similar properties. The qualitative pattern is relatively similar from plant to plant, but there are considerable quantitative variation. Alkanes are saturated long chain hydrocarbons. They are usually present in the range of C to C carbon atoms. Examples are n-nonacosane, C H and n-hentriacontane, C C . In general, odd-numbered carbon chains occur predominantly in the cuticular wax of plants and are substantially indigestible.

How alkanes are “user friendly” !

Following are some points to ponder :

• Alkanes are long carbon chains found naturally in plants and each plant species has its unique compliment of these different alkanes which act like “fingerprints”. Forage intake can be estimated from ‘faecal grab samples’, if the ratio between these endogenous plant alkanes and exogenous alkanes delivered from “a rumen slow - release gelatin capsule” is calculated.

• Alkanes can also be used for determiningdigestibility and characterizing thespecies compositionof thediet, makingalkanes an extremelypowerful tool for dairy research.

• Anenexpensive, reliable and simpletechnique offers tremendous potential for research in the area of low cost dairy production from forages. Such data may be used by “slow–release marker” to estimate intake and digestibility.

• Alkanes offer a potentially simple technique for the animal scientist and it is feasible to estimate alkane concentrations using Near Infra-Red scanning [N.I.R.]. It is a rapid analytical method, thus making alkane technology an extremely ‘user friendly’ tool to be widely adopted on behalf of the dairy industry.

For economical ration -preparation, selection of cheap feed amongthe locally available sources, is an important point to ponder. For this purpose, a list of available feeds is prepared alongwith their latest costs on dry matter basis. The cost per kgof dry matter is divided by the amount of the nutrient (as a decimal), it will give us a good idea of the :

• Cost of Crude Protein in ??Protein supplements and,

• Cost of Energy in ??Energy feeds.

For example, if alpha alpha hay costs Rs 3.93 per kgof dry matter, the cost per kg of Crude Protein = 3.93/0.171 = Rs 22.98 per kg.

In this way, it is possible to prepare a list of protein sources in the order of “Ranking” from which feeds can be selected at lower costs.

Effect of Differences in Dry Matter

Feeds are purchased on the basis of Dry Matter due to variation of moisture content. For example :

A Corn of 89 % Dry Matter costs Rs 7 per kg,

Another type of corn of 75 % Dry Matter can’t be comparable on this cost This can be done as following 

Egg Formation Phenomenon

The chicken egg consists of a very small Reproductive cell or Germinal disc [orBlastoderm;which iscapable of developingintoanEmbryo, iffertilized by a Sperm]. This tiny cell is surrounded by :

• Yolk
= OVARYis responsible for its synthesis.

• Albumen, Shell membranes, Shell and Cuticle
= These are produced in the OVIDUCT.

[A] OVARY

Although there are two ovaries and two oviducts in the hen, but only the left ovary and left oviduct are functional [because, the right ones are atrophied during embryo development]. Before egg production, the ovary is a group of small follicles of different sizes containing ova.

Formation of Yolk

• The yolk is just a source of food material for the small Reproductive cell (Blastoderm).

• Major amounts of yolk material is produced in the liver and transported to ovarythrough blood.

• Two days afterthe formationof First yolk. Second yolkbegins to develop.

• It takes about ten days for a yolk to mature.

1. Introduction

Osmotic dehydration is a useful treatment of dehydration compared to the other dehydration processes, as other dehydration processes bring adverse and irreversible changes in physical and nutritional status of food material. Recently in many studies it was found out that since plant membranes are semi-permeable in nature, not only moisture but transfer of solute from osmotic solution to the food material also takes place. Another kind of transfer which was also noticed is the leaching of micronutrients from the cells of food to the osmotic solution, but the amount being very low, this transfer can be neglected. (Mayor et al., 2006). The mass transfer kinetics was studied for different food materials (Hawkes and Flink, 1978). Effect of different variables such as pressure and temperature were also studied (Rastogi and Niranjan, 1998). The effective diffusivities for both water loss and solute gain can be calculated by using various methods which gives the rate of diffusion of solute and moisture for the food material. The finding of solute gain and leaching of micronutrients pointed the requirement of maintaining the osmotic dehydration process, which could be done by maintaining the process variables of osmotic dehydration. Impact of various process variables on osmotic dehydration and their best levels at which maximum water loss and minimum solute gain could be obtained had to be calculated out. For this purpose, optimization of process variables through response surface methodology (RSM) could be best utilized (Uddin et al. , 2004). RSM is a statistical tool which gives the random combinations of input variables to give the best output result as required. Various works have been done on optimization of process conditions of osmotic dehydration taking different samples of foods. In this study, bamboo shoot species (Bambusa balcooa) was taken as sample for osmotic dehydration to optimize the process variables for osmotic dehydration of bamboo shoots using salt as osmotic agent followed by calculation of effective diffusivity of water and solute during osmotic dehydration of bamboo shoot.

1. Introduction

Cherry peppers (Capsicum frutensis var. cerasiforme) which is locally known as dallae khorsani, is one of the important cash crops of Sikkim and Darjeeling hills. They are small, round shaped, fleshy and heavily seeded. They are green in color in early stage of fruiting and turn red when fully matured. It is an excellent source of vitamin A and C, which are important antioxidants (Howard et al., 1994). Cherry peppers are an ideal size for pickling or brining. Its hotness ranges from moderately mild to very high.

Due to its high moisture content (about 85% w. b. ), shelf life of cherry pepper is limited to 7 - 10 days. This makes it rare and costly during the off season. Hence, preservation of cherry peppers is of considerable importance both to the farmers as well as to the consumers. Drying is one of the oldest methods for preservation of cherry peppers to make it available throughout the year. To increase shelf life of chilies, drying up to 10 % moisture content (dry basis) is required which is accepted in export market.

For drying chillies, sun and hot air drying are the most common drying method used. However, due to the prolonged drying time of 16-48 h, the quality of the dried chillies is reduced (Kim et al., 2002). Many researchers paid more attention to innovative techniques such as short and medium-wave infrared radiation drying (SMIR) which not only maintain product quality, but also increase the drying rate. Moreover, infrared drying could save up 50% energy compared to convective drying (Nowak & Lewicki, 2004). The ability of infrared radiation to penetrate and heat the inner layers results in higher rate of heat and mass transfer (Ginzburg, 1969).

1. Introduction

Rasogolla is a sweetened dairy product which is made from milk mainly from casein protein. Generally rasogolla is made by heating the raw milk around 80-850C ,then slowly cool the milk around 650C and acid coagulation of the milk is done. Then separate the channa (mainly casein) and whey, and drained the whey followed by the pressing of the channa to remove the excess water. Then channa is thoroughly kneaded and are rolled to balls and cooked in sugar syrup and get the rasogulla. Total value of 1000 billion for Indian dairy output in 2001, the output of traditional dairy products is estimated at over 400 billion. The share of the organized sector in the indigenous products is at present only 50 billion only (Patil, 2005).

1. Introduction

The Refractance Window drying system uses circulating hot water, usually at 90°C and at atmospheric pressure, so that it can carry the thermal energy to the material to be dehydrated. Thermal energy is transferred to the wet product from circulating hot water through a plastic interface which is transparent to the infrared radiation. The actual product temperature is kept below 70°C. The heated water is recycled and reused, which helps in improving the thermal efficiency of the system. The use of hot water as the heat transfer medium and at temperatures just below boiling is a design feature that is unique to this drying method. In RW drying, there are three modes of heat transfer, namely conduction, convection, and radiation. The process water is heated by steam within an insulated tank and then circulated in shallow troughs to transfer thermal energy to the plastic conveyor. As the plastic conveyor is very thin, it reaches the temperature of hot water flowing beneath it almost immediately. By conduction and radiation, the thermal energy from the hot water is transmitted through the plastic conveyor. The use of process water at temperatures just below boiling and a thin plastic conveyor with infrared transmission in the wavelength range that matches the absorption spectrum for water all work together to facilitate rapid drying.

1. Introduction

The term nanotechnology was first coined by Norio Taniguchi in 1974 to describe controlled thin film deposition (Taniguchi, 1974). Nanotechnology is now generally recognized to include materials with a size in at least one dimension in the 1-100 nm range, although this terminology is not strictly enforced (Rao, 2008). In food science, there are many types of naturally occurring particles that fall within this size range and the use of a strict definition is problematic due to the large distribution of sizes (Kruif, 1998). Many natural foods contain nanoscale components and their properties are determined by their structure. These have been eaten safely for generations. In fact, some of food’s most important raw materials (proteins, starches, and fats) undergo structural changes at the nanometre and micrometre scales during normal food processing(Morris and Parker 2008). Food proteins (for example, native beta-lactoglobulin, which is about 3. 6 nm in length) can undergo denaturation (via pressure, heat, pH, etc. ) 

1. Introduction

Jackfruit is the largest edible tree borne fruit in the world (Baliga et al., 2011). According to Haq (2006) India is considered as the birth place of jackfruit. The major jackfruit producing states in India are Assam, Tripura, Bihar, Uttar Pradesh, the foothills of the Himalayas and South Indian States of Kerala, Tamil Nadu and Karnataka. Jackfruit is a fruit prized in some areas of the world and allowed to go waste in others. According to Sidhu (2012) the extent to which jackfruit is being wasted in India is not exactly documented however, the wastage is approximately 75%. On an average a fully developed fruit may weigh 10-25 kg. Seeds occupy around 10 to 15% of the total weight of the jackfruit (Bobbio et al., 1978). It is reported that jackfruit seeds contain high amount of protein, fiber and carbohydrate (Ocloo et al., 2010). The seeds are viable for not more than three or four days (Sidhu, 2012). According to Abedin et al. (2012) the industrial utilization of jackfruit pulp are varied but the seeds are discarded from those food industries. Moreover, mature fresh seeds cannot remain fresh for long as they tend to germinate easily. So, converting jackfruit seed into flour is an option in order to increase the shelf- life of the seed and can substitute various cereal based flours for developing food products. Dumpling is a type of food which is made out of small pieces of dough wrapped around a filling that may include vegetables, meat, or other ingredients mixed together.

1. Introduction

With increase in consumer awareness and lifestyle the interest for health promoting natural food ingredients has expanded in recent years. However, globally it has become a great challenge to the manufacturers to ensure that such compounds should remain in their active form during processing and storage with an emphasis to its bioavailability profile. Oxidative stress is the major contributor to the pathogenesis of a number of chronic and degenerative diseases including atherosclerosis, Alzheimer’s and Parkinson’s disease, diabetes, DNA damage, carcinogenesis, cardiovascular and neuro degenerative diseases, allergies, premature ageing etc. (Gupta et al. , 2014; Svetli et al. , 2010). Endogenous antioxidant defense mechanisms are not always sufficient to fully scavenge the free radicals formed in the body during various processes. Therefore, dietary components having antioxidant properties, such as tea flavonoids, are very much necessary to supplement the activity of endogenous antioxidants. Tea is one of the most concentrated sources of flavonoids and phenolic acids which show antioxidant activity by sequestering metal ions and by scavenging reactive oxygen and nitrogen species (Frei & Higdon, 2003).

1. Introduction

The growing prevalence of obesity and obesity associated disorders as well as its impact on public health has received increased attention in recent years. As a result, obesity is now considered one of the world’s leading public health problems. A study published in the noted medical journal Lancet says India is just behind US and China in this global hazard list of top 10 countries with the highest number of obese people. The study - titled ‘Global, regional, and national prevalence of overweight and obesity in children and adults during 1980-2013: A systematic analysis for the Global Burden of Disease Study 2013’ - used data collected by international bodies and organizations in various countries like India over three decades. China and India together accounted for 15 per cent of the world’s obese population, with 46 million and 30 million obese people, respectively. According to the study, the number of overweight and obese people globally increased from 857 million in 1980 to 2. 1 billion in 2013. This is one-third of the world’s population.

With lifestyle disorders forcing more and more people to reel under excess body weight, even relatively younger people are developing joint disorders and knee pain. Excessive weight is associated with a series of health problems, including blood pressure, diabetes, and cardiovascular ailments. Therefore there in an urgent need to envision effective anti-obesity strategies through effective interventions.

1. Introduction

Cassava (Manihot esculenta Crantz) is a tuberous root crops. It is known as “U mangra” in Manipuri. It is also known as mandioca or tapioca, yucca, mosioc. Cassava belongs to Euphorbiaceae family The cassava plant is of perennial woody shrub in nature. (CGIR 2011; FAO-2015, Zhu 2015). Like paddy and wheat as staple food crops, cassava is also staple food crops for many countries. It supports millions of population especially in South American and African countries. It is also known as food security crop because of its ability to withstand harsh environmental conditions when other food crops cannot sustain and destroy. It can grow in low fertility soil, marginal land with less agricultural maintenance. It resists to pest and diseases so cultivation is easy to carry out with less expenditure. Cassava is abundantly grown in Manipur mostly in hilly areas. To some extent, it is consumed as snacks item either by burnt in fire or charcoal or boiled form with little addition of salt. The fresh young leaves and roots after removing its cover is used as ingredients of “singju” a salad type traditional snack items of Manipur. Out of cassava sweet snack item locally called “manghra heingan” in Manipur is also prepared. For making this sweet item, cassava is boiled with sugarcane molasses until it is cooked and reach certain sugar consistency of molasses. This sweet item is similar with murabba available in Indian market.

1. Introduction

Kiwi fruit (KF) is very much acceptable for preservation by freeze-drying (FD) technique, since it has very much health benefits such as low calorific value, low glycemic index (GI), more vitamins (particularly vitamin C), maximum load of potassium, presence of variety of pigments, few important enzymes, low allergic response (AR) and finally it is rich in natural antioxidants, polyphenols. It is translucent, green pulp and many black seeds arranged nicely with covered by hairy and brown skin. The KF seeds are small sizes and black colored surround inner circularly through the whole pulp. It gives a nice crunch during consumption and provides a number of essential nutrients. Therefore, it will be remembered that seeds cannot be discarded during processing of KF unlike other fruit (jamun etc. ) seeds.

1. Introduction

Biopolymers nowadays are grabbing a nice place in packaging industries replacing synthetic polymers. The most important advantage of biopolymer over synthetic polymers is that they are biodegradable and can be developed from agricultural or food processing wastes. Among the wide variety of materials currently used in food packaging, polymers have taken a major share because of their versatility and advantageous performance (Valdés et al., 2014). However, most polymers used for food packaging are not biodegradable or compostable and therefore represent an increasingly serious end-of-life disposal problem worldwide. Although food package stability during the shelf-life of the product is an advantage, it turns into a disadvantage when the packages enter the post-use phase.

1. Introduction

Ohmic heating is an emerging method of thermal processing which have the feature of HTST treatment (Halden et al., 1990) with lower energy inputs (Choi et al., 2011; Sastry et al., 2011). During ohmic heating (Fig. 1) the alternating current is passed through the food material, where food acts as a resistor to the flow of electric current and leads to the instant volumetric heat generation by following the Joules first law of heating (Pereira & Vicente 2010; Lima et al., 1999 and 2001; Wang, 2014). Ohmic heat treatment of food material has been found to reduce microbial load of the food material simultaneously with the inactivation of the inherent enzymes (Demirdoven & Baysal 2014; Yildiz & Baysal 2006; Jakob et al., 2010). Despite the problems of electrochemical degradation associated with it, ohmic heating has been successfully studied for its use in preheating, blanching, pasteurization and extraction (Leizerson, & Shimoni, 2005; Lima & Sastry, 1999; Lakkakula et al., 2004). A majority of studies that have explored the effect of ohmic treatment have focused on a number of commercial products from pulp (strawberry), or puree (pea) to juice (grape), etc. (Castro et al, 2004; Icier et al, 2008; Icier et al., 2006). However, the present chapter is confined to put some light on the studies conducted on ohmic heating of various liquid food material and its effects on various parameters of the food material.

1. Introduction

Underutilized fruits and vegetables are commercially neglected but recognized as rich sources of nutrients and non-nutrient bioactive compounds (Ali et al., 2008). These crops are very popular among local communities in many parts of the world and well accepted in their traditional diets and therapeutic medicines (Animesh et al., 2010). Nowadays, these are gaining significance in research and development programs of many organizations. Meghalaya is endowed with rich and unique diversity of indigenous wild edible fruit species of which most of them are less known and underutilized (Haque et al., 2009). There are rich in functional bioactive components such as vitamins and minerals are the much talked dietary nutrient for women and children health. It is being supplied to body through tablets, vegetables, fruits and other food items (Islam et al., 2012).

1. Introduction

The emergence of food borne illness due to contaminated food is one of the most frequently occurring event and challenge for the food processing industry. This has resulted into economy as well as energy requirement to counter the food borne pathogens. Some of the important pathogenic microorganisms of concern are E. coli, Listeria monocytogenes, salmonella, etc. To address the food safety and quality issues, several non-thermal food processing technologies have been developed in the last decades, with an aim of achieving food safety without significantly affecting the quality of the food product. Cold plasma in one of the non-thermal processing technology, which has shown promising results as evidenced by recent scientific investigations.

The plasma is known as fourth state of matter after solid, liquid and gas state. Plasma contains diversity of energetic species including ions, electrons, atoms, excited molecules and charged particles. In a plasma, a significant number of electrons have such a high energy that no nucleus can hold them. When a gas is subjected to heat or an electric field, some of the atoms become ions and the gas is said to be ionized. An ionized gas in its normal condition, can conduct electric current to a limited extent. If the heat or electric current becomes extreme, many of the atoms become ions. The resulting super ionized gas, which can conduct a large and sustained electric charge. Plasmas are used in several materials processing industries like textiles, electronics, paper and glass industries etc.

1. Introduction

Citrus is a common term and genus (Citrus) of flowering plants in the Rue family, Rutaceae. Citrus fruits are non-climacteric and respiration slowly declines and the production and release of ethylene is gradual. India ranks sixth in the production of citrus fruits in the world. Citrus wastes typically are about 45- 50% of the weight of citrus original and the percentage of waste to 30-50% for vegetables and fruits in general. Natural colour plays a significant role in determining the degree of consumer acceptance of the product. In addition, carotenoids (vitamin A precursor) have high nutritional values which are important for human nutrition.Francis and Isaksen (1988) stated that carotenoids play a very important role for extraction as for protection of health against cancer, cardiovascular and eye disease and as anti-oxidant. Carotenoids play important roles in human nutrition through their provitamin A activity, but also by acting as antioxidants, for prevention of age-related macular degeneration or skin protection against UV radiation. The antioxidant capacity of carotenoids was proved for pure compounds as well as for plant extracts and food. The main objective of this research work is extraction, determination and identification of natural colorants from different citrus wastes (citrus peel). Also to study the effects of pH and oxygen on the stability of extracted pigments and determination of the specific carriers for the extracted pigments using solid matrices (starch, dextrin, arabic gum and flour).

1. Introduction

Milk is considered to be an adequate source of valuable macro nutrients, fat, protein, lactose. Vitamins and micronutrients making it a wholesome food. It can serve as an excellent carrier product for extra nutrient and if enriched or fortified it can satisfy the nutritional needs of the population. Soybean is an excellent source of low cost protein and has been an important nutritional component and medical investigation have revealed the great potential of soy foods for lowering blood cholesterol levels and the incidence of heart disease and cancer. The dry soybean contains roughly 40 % protein, 20% oil and 35% soluble (sucrose , raffinose, stachyose, etc. ). Aqueous extract of soya is an ideal substitute of animal milk for people suffering from allergic, gastrointestinal and other diseases peculiar to elderly people liu et al. (2004). Soymilk obtained by aqueous extraction from whole soybeans is a well known food product that is growing in popularity in many areas of the world (Hauman,1984). Soy milk is low in fat, carbohydrate, calcium, phosphorus, and riboflavin, but high in iron, thiamin, and niacin in comparison with cows’ milk. Soy milk contains higher amount of protein than buffalo milk and is deficient in sulfur containing amino acids. Soya milk is used in various products like paneer, yoghurts , cheese, tea and coffee whiteners , shrikhand, rasogolla and various indigenous milk sweets, confectionary, etc (Kale et al., 2012, Chang et al., 2005) also reported that intake of fermented soymilk improves the ecosystem intestinal tract by increasing the amount of probiotics. During the last years, soy beverages consumption has gradually increased due to their significant concentration of health promoting compounds, such as iso flavones.

1. Introduction

Sundarbans is claimed to be one of the wonders of the world for its natural resources of halophytic mangrove forest (some 34 species of true mangroves are present), biodiversity and ecosystem that form an extraordinary environment of the globe. Available brackish water environment of Sundarbans provides favourable substratum for algal communities (Naskar and Naskar, 2010). Enteromorpha intestinalis specifically is one of the algal species that is very abundant in the Sundarban region. The production of total seaweeds in India in 2000 was approximately 600,000 tons (wet weight). India produces 110-132 tons of dry agar annually utilizing about 880-1100 tons of dry agarophytes. The seaweed industry in India is mainly a cottage industry and is based only on the natural stock of agar-yielding red seaweeds, such as Gelidiella acerosa and Gracilaria edulis, and algin yielding brown seaweeds species such as Sargassum and Tubineria (Kaladharan and Kaliaperumal, 1999).

Investigational studies indicate that marine algae contain significant amount of nutraceuticals, vitamins, proteins, carbohydrates, fiber and antioxidants. Composition indicates that there is a tremendous scope for food and pharmaceutical applications. These may be used for food fortification but after rigorous studies. Formulation, standarizaiton and characterization should be performed before human use. Studies for exploitation of the bioactive components of the species may open up new avenues. Hence there seems to be a full scope for the realization of outcomes of the research. Further the utilization of the developed processes at higher scales may reap in financial benefits and may prove beneficial to the local people, who are supplier of the raw materials. The present study is an attempt to utilize this India variety of macro-algae for fortification of bakery food products.

1. Introduction

Jackfruit (Artocarpus heterophyllus Lam. ) a member of the family Moraceae is the largest tree-borne fruit in the world. India is the second biggest producer of the fruit in the world and is considered as the motherland of jackfruit. The jackfruit is native to parts of South and Southeast Asia and is believed to have originated in the rainforests of Western Ghats of India and is cultivated throughout the low lands in South and Southeast Asia. Major jackfruit producing countries are Bangladesh, India, Myanmar, Nepal, Thailand, Vietnam, China, the Philippines, Indonesia, Malaysia and Sri Lanka. There are 100-500 seeds in a single fruit (Sidhu, 2012). It is composed of rind, edible bulbs of yellow-flesh and seeds. The ripe fruits are eaten or processed into snacks and canned products. Seeds make up around 10 to 15% of the total fruit weight (30-365/ fruit) and have high carbohydrate and protein contents (Ocloo et al., 2010). Mostly the seeds, rind and strands are discarded as waste. So, the seed, rind and strand flour can be an alternative intermediatory product, which can be stored and utilized, both for value addition and to blend with other grain flours without affecting the functional and sensory profile of the final product.

1. Introduction

Banana is having number of species and belongs to genus Musa of the family Musaceae. Bananas are produced in large quantities in tropical and subtropical areas. World production of Musa in 2003 was estimated at 102 million MT of which about 68% was classified as bananas and 32% as plantains (FAO, 2003). For growing banana need special climate and they are mainly produced in developing countries P (Zhang et al., 2005). The crop is of major importance to the people in the growing. The largest producer of banana is India (27%) and other countries are Ecuador, Brazil, Indonesia, Philippines and China etc. Ecuador (42. 3%), Colombia (24. 7%), Philippines, Dominican Republic, Belgium, Italy, Peru, France, Netherland, Germany are the top exporter countries in 2009.

Banana is a botanically a berry require a warm, humid, frost-free climate with optimum temperatures between 22 and 31°C. In several report it was found that banana plant die in ground level at below temperature -2°C. Primary component of the aroma of fresh bananas is isoamyl acetate which is also called as banana oil. Banana is highly energetic food and rich in potassium, sodium, phosphorus, chlorine, magnesium, sulphur, silicon, calcium; and the vitamins: A, B1, B2, C and B3 (niacin). Banana helps in lowering cholesterol, enhances liver function, regulate heart rhythm and disease, decrease the risk of stroke, regulate Bowel movement, helps keep blood pressure under control and helps in weight loss.

1. Introduction

Okara is a by-product generated during processing soybean into soymilk or tofu. Okara is rich in fibre and protein. It contains most of the carbohydrates, some of the protein and a small portion of the oil from soybeans. Okara contains approximately 50% fibre, 27% protein, and 10% fat on dry basis (Li et al., 2012). About 1. 2 kg of fresh okara is produced from every kilogram of soybean processed for soymilk (Vishwanathan et al., 2011). Fresh okara from soymilk production has about 80% moisture. The protein present in okara has good nutritional quality and superior protein efficiency ratio. Other soy components that are also likely present in okara include isoflavones (genistein and daidzein), lignans, phytosterols, coumestans, saponins, and phytates (Li et al., 2012). The most common method of utilization of okara is in the form of animal feed. Tofu or soymilk processing plants primarily dump okara as landfill or resort to burning. Okara can be utilized as a fertilizer as it contains various nutrients required for growth of plants. It can be used as a fermentation substrate for production of ethanol. Okara can also be used in pet foods as it contains high levels of extenders and protein. Apart from these, okara can be used in a variety of food products. It can be used in various food products. Utilization of okara is still in the initial stage. It can be used as a replacement of wheat flour in baked products. It can also be used in various soups, salads or vegetable preparations.

Resistant starch refers to the portion of starch and starch products that resist digestion as they pass through the gastrointestinal tract. Resistant starch is the fraction of starch which is not hydrolysed to D-glucose in the small intestine within 120 min of being consumed, but which is fermented in the colon. It can be used as a functional ingredient in various food formulations (Fuentes-Zaragoza et al., 2010). RS has desirable physicochemical properties (Fausto et al., 1997) such as swelling, viscosity increase, gel formation and water-binding capacity, making it useful in a variety of foods. It helps in improving the appearance, texture, and mouthfeel of the final product compared to conventional fibres. Resistant starch can act as a prebiotic for gut microflora (Sajilata et al., 2006). It has hypocholesterolemic effects, is hypoglycaemic and prevents gall stone formation.

1. Introduction

King chilli belongs to the genus Capsicum and species chinense, which is world famous for its heat content. King chilli measures 60 to 85 mm (2. 4 to 3. 3 inches) long and 25 to 30 mm (1. 0 to 1. 2 inches) wide with a red, yellow, orange, or chocolate color. The plant came into limelight when it was announced as the hottest chilli in the world in 2006 (Baruah et al., 2014). The people of the North-eastern India use the fruits of King chilli in different food formulations like flavouring curries due to its high-quality fragrance and pungency and also for various medicinal treatments like rheumatism, arthritis, gastritis, ankylosing spondylitis, digestive diseases (Sarwa et al., 2012) and to reduce chronic congestion (Raktim and Changkija, 2009). It is also used as a bird, animal and insect repellent as well as a biochemical pesticide. The extremely hot or burning sensation of chilli is due to the presence of capsaicinoids found only in Capsicum (Hoffman et al., 1983).

In northeastern India, King chilli has been cultivated in a traditional manner since time immemorial and there exists a considerable amount of genetic variability among the landraces (Raktim and Changkija, 2009). The pharmaceutical applications of capsaicinoids are attributed to their analgesic, antiarthritic, anticancer and antioxidant properties. In fact, capsaicin has been at the centre of intense research for elucidating the basis of its pharmacological properties and exploiting the therapeutic potential (Prasad et al., 2005). It has also been reported that capsaicin inhibits the growth of prostate cancer cells (Mori et al., 2006). The antioxidative capacity of chilli is higher than ginger, garlic, mint and onion (Shobana et al., 2000), which may play an important role in the process of chemoprevention (Yu et al., 2002).

1. Introduction

Organophosphate (OP) and organocarbamate (OC) pesticides are highly used in modern agriculture due to their low persistence and high insecticidal activity. Although they are relatively less persistent than the organochlorines, they have greater acute toxicity with tolerance level ranging from 1 to 8 μg mL-1 (Mulchandani et al., 2001). The high toxicity of OP and OC neurotoxins and their large use in modern agriculture practices has increased public concern, health risk and the consequent contamination of water and food sources (Buonasera et al., 2010). Development of fast and cost effective analytical tools for onsite monitoring of OP and OC contaminations in food, water and in the environment is highly necessary. An approach toward that has resulted the evolution of acetylcholinesterase (AChE) based biosensors for OP and OC pesticides. Ample literature is available on AChE based biosensors (Zhou et al., 2013). But some intrinsic disadvantages remain that limits its utility and field deployment. The most influencing ones are their inability to sustain in organic solvents and the limited class selectivity that demands alternate bioreceptor for pesticide detection. Given the diversity in mode of action of different classes of pesticide, it is quite challenging to come up with different sensor molecules for each class of pesticides. As a continuous effort towards that goal, attempts have been made to use the Glutathione S –transferses (GSTs; EC 2.5.1. 18) for the purpose. GSTs are a multigenic family of cytosolic proteins with multifunctional biological roles, widely distributed throughout the body and found in the liver, kidney, brain, pancreas, testis, heart, lung, small intestine, skeletal muscles, prostate and spleen (Jancova et al., 2010). The important biological functions those are making GSTs the focus of current research includes its catalytic role in detoxification reaction (Lumjuan et al., 2011) over expressions during phase II metabolism as well as drug resistance associated with anticancer therapies of human and the resistance acquired by certain insects while getting exposure to pesticides (Borah et al., 2016).

1. Introduction

Purple colour passion fruit (Passifora edulis Sims) is a tropical fruit and is well known for its nutritional content and medicinal properties (Patel, 2009). Various type of vitamin E such as α-tocopherol (5,7,8 trimethyl), β-tocopherol (5,8 dimethyl),g-tocopherol (7, 8-dimethyl),d-tocopherol (8-methyl) and α-tocotrienol, b-tocotrienol,g–tocotrierol and d- tocotrienol were quantified in passion fruit as antioxidant molecules with various health benefits (Ramaiya et al., 2013).

Foam mat drying convert thin pulp into stable foam by whipping. Eventually, the whipping process increases surface area, and speed up the drying rates which yield dried foam mat powder of acceptable quality in reduced time span (Kudra and Ratti, 2006). Rheology plays a vital role in food manufacture and marketing nowadays viz., design of handling systems, quality control and evaluation of sensory stimuli of viscosity (Barnes, 2001). It also concerns with how all food materials respond to applied forces and deformations. Basic concepts of stress (force per area) and strain (deformation per length) are keys to all rheological evaluations. Stress(r) is always a measurement of force per unit of surface area and is expressed in units of Pascals (Pa). The direction of the force with respect to the impacted surface area determines the type of stress. Normal stress occurs when the force is directly perpendicular to a surface and can be achieved during tension or compression. Shear stress occurs when the forces act in parallel to a surface. Various food shows different rheological behavior and categorized into solid and liquids stages. It basically means that food varies their characteristic in viscous and elastic behaviors commonly known as viscoelasticity of food, caused by entanglement of long chain molecules with other molecules (Abang, 2010). The dough rheology of various flour has been investigated by various research. Although, there has not been any published literature about dough rheology with incorporated passion fruit powder. To the best of our knowledge, there are no published reports regarding the shear stress properties of passion fruit powder incorporated rice dough.

1. Introduction

The culinary banana (Musa ABB) of Assam and North East India (locally known as kachkal) is an important and cheap source of vegetable in the diet of local people. It is considered as one of the potential sources of carbohydrates, starch, polyphenols, micronutrients and functionally important bioactive compounds (Khawas et al., 2016). Native starches have limited use in food application as it has many weakness such as narrow peak viscosity range, poor process tolerance, low shear stress resistance, hydrophilicity, thermal decomposition, high retro gradation, and synersis and cooked starches will formed a weak, cohesive and rubbery paste. These facts motivated the employment of modified starches as important functional ingredients in processed foods in recent years because of their improved functional properties over unmodified starches (Fleche et al., 1985).

To overcome these problems physical. Chemical and enzymatic modification of Starch is done. Chemical modification of starch generally involves esterification, cross linking, etherification or oxidation of the available hydroxyl groups on the β-D-glucopyranosyl units that make up the starch polymer.

1. Introduction

Pineapple (Ananas comosus) is a tropical fruit having good sensorial characteristics such as, mechanical properties, flavor, acidity/sweetness ratio, color; and nutritional. Pineapple is known to be a good source of vitamins such as vitamin C, vitamin B and antioxidants. The free radical scavenging activity of pineapple is found to be much higher than banana and is comparable to that of guava (Alothman et al., 2009). However, it is a perishable cash crop that grows in abundance in a short time. This necessitates protecting the perishable fruit against quality loss during storage and distribution.

Fruit leathers are an economic and convenient substitute for natural fruits with high nutritional components. Leathers are made by removing moisture from wet pulp until the desired cohesive “leathery” composition is obtained. Since it is light and low in moisture it has minimum storage problems and is economical to ship (Moyls, 1981). Therefore, making fruit leather from fresh fruits is an effective way to preserve fruits (Maskan et al., 2002). Furthermore, fruit leather has far fewer calories, less than 100 kcal per serving (Huang and Hsieh, 2005) and have a far greater nutritional value (e. g., especially in terms of energy, minerals, antioxidants and fiber) than the fresh fruits because all nutrients are concentrated. There are large numbers of fruit leather available in the market, such as mango leather, apricot fruit leather, grape leather, berry leather, kiwifruit leather, and jackfruit leather (Torres et al., 2015).

1. Introduction

Starch is present in the endosperm of cereal grains which provides the necessary energy during the process of germination and seedling establishment and rice starch is reported to supply 22% of global energy intake in humans (Sun et al, 2014). Starch is a semi-crystalline polymer composed mainly of linear and highly branched polymer viz. amylose and amylopectin respectively. Each polymer is composed of several D-glucose molecules and the difference lies only in the linkages between them. Amylose is a linear chain which is interlinked by α- (1→4) linkages and few branched chains (Kizil et al, 2002). Amylopectin subunits are linked by both-(1→4) and-(1→ 6), with about 95% of the glyosidic bonds being-(1→ 4) linkages and roughly 5% being-(1→ 6). The highly branched nature of amylopectin is attributed to the-(1→ 6) linkage.

1. Introduction

Sea Buckthorn (Hippophae sp. ), a high altitudinal, thorny, temperate, deciduous, dioecious, actinorhizal shrub or small tree belonging to the Kingdom-Plantae, Clades-Angiosperms, Eudicots and Rosids, Order- Rosales, Family-Elaeagnaceae and native to Eurasean Countries like India, China, Russia, Nepal, Pakistan, etc. (Barik et al., 2016). SBT is having tolerance towards a wide group of pests and insects, can grow in extreme nutrient deficient conditions and temperature range of -40 °C to 40 °C. It contains more than 190 reported invaluable phytochemicals and has the potential for multidimensional use as food, fodder, medicine, fuel, and conservation of soil and bio diversity (Qinxiao and Hongyan, 2003; Barik et al., 2016). SBT berries, leaves, stem and root barks also contain nutrients and bioactive compounds which mainly include lipids, sugars, amino acids, organic acids, fatty acids, carotenoids (β-carotenes, lycopene, zeaxanthin), tocopherols (α β, γ, δ), sterols (ergosterol, campesterol), Vitamins (A, C, E and K), phenolic and flavonoid compounds (gallic acid, caeffeic acid, ferulic acid, isorhamnetin, kaemferol, quercetin, myricetin) and isoprenols (Tiitinen et al., 2005; Anderson et al., 2009; Barik et al., 2016). All these studies are primarily based on the prominent SBT species Hippophae rhamnoides. However, Sea Buckthorn (Hippophae salicifolia) of North East India is an underutilized non-conventional plant and its potential is not yet fully explored. Very scanty literatures are available on the identification, documentation and preliminary qualitative phytochemical characterization of SBT from North East India (Basistha et al., 2010; Pradhan et al., 2015). But there is no any report on systematic qualitative phytochemical characterization of all the plant parts of SBT from North East India in general and SBT of Arunachal Pradesh in partcular.

Introduction

Billions of chemical reactions are happening inside human body and that too with lightning speed. However, the same reactions if carried out in laboratory, they take a very long time. The reasons behind it are the biocatalysts, also known as enzymes, which are synthesized by living cells. Chemically, they are proteins(except ribonucleic acids: RNA), colloidal in nature, thermo-labile in character and very specific in their action. For example, hydrolysis of proteins by a strong acid at 100°C takes a couple of days; but same proteins can be digested within couple of hours inside human body at 37°C. Similarly, carbonic anhydrase is used as a catalyst by living cells to transfer carbon-di-oxide from cells to blood. This process is 107 times quicker than the same process if occurs without the help of enzymes. Therefore, enzymes can be defined as the biomolecules or biocatalysts which can speed up the rate of the chemical reactions. The substance upon which an enzyme acts is called as substrate and the one which is produced as the result of enzyme-substrate reaction is known as product.