eChapters

Introduction

Antimicrobials, viz. antibiotics, antivirals, antifungals and anthelmintics are substances widely used to prevent and treat infections in humans, fish & prawn, livestock animals, and crops. In a situation where microorganisms such as bacteria, viruses, parasites or fungi become resistant to antimicrobial treatments to which they were previously susceptible, it is apprehended that antimicrobial resistance in the microbes has evolved. In fact, antibiotic resistant bacteria evade the effects of antibiotics and multiply in their own way leading to severe health consequences in human and animals. The menace is such that antimicrobial resistance (AMR) hinders treatment modalities targeted for infectious diseases. The hazards of antimicrobial resistance is frequently observed in various pathogenic and non-pathogenic organisms, viz. Salmonella spp., Campylobacter spp., Yersinia sp., E. coli serotype O157:H7, enterococci, Pasteurella sp., Actinobacillus sp. with varying severity (McEwen and Fedorka-Cray, 2002). Microorganisms that develop resistance to commonly used antimicrobials are referred to as superbugs. Globally it is a matter of great concern that it spreads rapidly and threatening the ability to treat common infectious diseases, resulting in prolonged illness, disability and death. Without any effective antimicrobial agent, treatment of infectious diseases, many medical procedures like cancer therapy, diabetes management, organ transplantation, and major surgery will not be possible. The microbes showing resistance to multiple antimicrobials are commonly known as multidrug resistance (MDR) organisms (Magiorakos et al., 2012).

Biofertilizers can be defined as the preparations containing strains of micro-organisms which can augment the microbiological process viz. nitrogen fixation, phosphate solubilization or mineralization, excretion of plant growth promoting substances or cellulose or lignin biodegradation in soil, compost or other environments. Biofertilizers can be divided into nitrogen fixing bacteria, phosphate solubilizing and mobilizing microorganisms and organic matter decomposers as (Table 3.1 and Fig. 3.1):

On the basis of Nitrogen Fixation: On the basis of N₂ fixation, they are divided in to two sub categories as

Vegetables have always been looked upon as an essential part of diet and are necessary for human health and well-being. Vegetables supply many kinds of nutrients, e.g., carbohydrates, proteins, minerals, vitamins, fibers, phytochemicals, etc. and also add flavour, colour and crispness to foodstuffs. For developing modern day vegetables, breeders have utilized an understanding of genetic principles and applied them for the improvement of these crops. They often make crosses (hybridization) between a crop plant and a related or wild species (a wide cross) enabling valuable genes to be used for genetic improvement of the crops. Over the last few decades, molecular breeding is supplementing plant breeder’s efforts for accelerated genetic enhancement bringing about a revolution in this area. This approach demands efficient procedures for the routine introduction of foreign DNA into plant genomes and utilizing them for the production of novel types of vegetable. In this chapter, attempts have been made to review most of the available molecular breeding techniques, which can routinely be employed in various aspects of vegetable improvement.

Cultivars are developed by selecting for desired traits or by removing undesirable traits that are controlled by genes (the blueprint for all characteristics in living organisms) from existing varieties or breeding lines. The plant species, varieties and clones are identified or selected by their physical features since olden times. However, these traits would change with respect to environmental and climatic conditions. The biochemical parameters like enzymes, proteins, alkaloids, etc. are also likely to change due to the stages of development of plant tissue. Successful selection strategies are dependent on the breeder’s ability to distinguish genetic effects from environmental effects on a visible or measurable trait. Therefore, the scientists resorted to use ‘genetic marker’, i.e., any stable and inheritable variation that can be measured or detected by a suitable method and can be used subsequently to detect the presence of a specific genotype or phenotype, which otherwise is very difficult to detect. Presently, the breeders and scientists all over the world are pursuing mostly DNA or molecular markers.

The term “fish” most commonly refers to Agnatha (jawless fishes), Chondrichthyes (sharks and rays), Sarcopterygii (lobe-finned fishes) and Actinopterygii (ray f inned fishes). Although the ichthyologist Regan (1910) defined a fish species as a product of interrelated communities with common “morphospecies”, in the early 20th century, it should be emphasized that the concept of species classification varied across scientists.

Aristotle (335-332 BC) provided the earliest classification of fish and described 117 Mediterranean fish species obtained from the Aegean Sea close to Greece.

Soils of India vary widely among different regions. The first soil map of India was prepared and classified on the basis of existing knowledge of Russian pedological principles. Govind Rajan (1971) and Govind Rajan and Rao Gopal (1978) have discussed in detail the later developments on the preparation of soil map of India and giving the equivalents of different soil groups in US Comprehensive System of Soil Classification. Soil resource mapping was initiated in 1986 and in a span of 10 years (1986-1996), a detailed database in terms of soils, their area and extent, characteristics and grouping following soil taxonomy (Soil Survey Staff, 1999) was created. The present chapter on “soils of India-nutrient status and management concerns” takes into account the following aspects:

Climate classification systems are ways of classifying the world’s climates. One purpose of climatic classification is to group together places with similar climatic characteristics. That means if an area or region is categorised under a particular climatic type, it possesses broadly uniform characteristics with respect to climate. Classifications have been based on climatic elements such as temperature and precipitation, which are measurable, and on differences in tree species, soil characteristics, topography, etc. The varied nature of earth’s surface and the many interactions that occur among atmospheric processes give every location on the earth a distinctive climate.

Although the delineation of distinct climates may seem likely a very straightforward job, establishing the criteria by which climates are delineated requires considerable subjectivity. There are many ways of classifying the climate depending on the user and the level of understanding of the climate system at a given time. Different regions of the same climate type constitute isoclimatic regions. Identification of isoclimates helps in the transfer of agro-technology and suggesting new cropping pattern. Climatic classification is based on two approaches, viz., generic or empirical approach and genetic approach. In the generic approach the classification is based on the observed climatic elements or their effects on the phenomena, usually vegetation or humankind. The genetic classification is based on climatic controls such as general circulation, net radiation and moisture fluxes.

The concept of climate classification was originally brought out to delineate natural vegetation, which is dependent on rainfall and temperature. Climate classification is unique tool to find out different climate types across the globe, out of which isoclimates or homoclimates can be traced out.

The climate of a particular place is the function of a number of factors such as latitude and its influence on solar radiation received, air mass influences, location of global high and low pressure zones, heat exchange from ocean currents, distribution of mountain barriers, pattern of prevailing winds, distribution of land and sea, and altitude.

Duck production has an immense role in improving the socio-economical status of rural farmers. In India, duck farming occupies an important place next to chicken farming. Duck contributes about 7-10% of the total poultry population of the world. Ducks are water fowl, hence, they need a semi-aquatic lifestyle. They need a pond, lake, river, canal or any such type of water bodies for their survival. Thus, they are mainly concentrated in West Bengal, Assam, Andhra Pradesh, Orissa, Kerala, Tripura, Tamil Nadu, Bihar, Jammu & Kashmir and Manipur. Ducks are reared for both eggs and meat purposes. Unfortunately, duck farming is not done in an organized way in our country.

Definition of Disaster

A disaster can be defined as a sudden or catastrophic event that causes significant damage, destruction, and disruption to human life, property, or the environment. Disasters can be natural, such as earthquakes, hurricanes, floods, wildfires, or they can be human-made, including industrial accidents, terrorist attacks, or technological failures.

Disasters often result in the loss of lives, injuries, displacement of people, infrastructure damage, and the interruption of essential services like electricity, water, and communication systems. They can have long-lasting impacts on communities, economies, and the environment.

Governments, organizations, and communities implement disaster preparedness, response, and recovery strategies to mitigate the effects of disasters, protect lives and property, and facilitate the rebuilding and restoration of affected areas.

Technical Knowledge (ITK) based special inputs / Techniques for plant growth

Growth of the plant has for long been believed to be due to the minerals absorbed from the soil and the food materials synthesized by the palnt. It is recognized that growth of the plant is very much regulated by certain chemical substances known as growth regulators. These substances are formed in one tissue or organ of the plant and are then transported to other sites where they produce specific effects on growth and development. These materials can be produced organically for improving plant growth.

3.1. Growth Promoting Substances

Are those organic solutions (like Panchagavya, Buttermilk & Coconut milk slurry, Amudhakaraisal) prepared using the plant and animal products, decayed fruit and other agricultural wastes. For example

Abstract

Mushroom has a great potential in India. Its production is gradually increasing at the annual rate of 7%. The total mushroom production in India is 1.13 million tones and on the other hand, mushroom production annually in china is 18.2 million tones. There are a no. 07 wild mushroom available in the world and medicinal properties much as anti Candida, anti tumor (including cervical, uterine, stomach cancer) and antis viral are rotally present. Of the entire wild mushroom tested, T. glolulum has the highest amount of protein, ask, Calcium, phosphorus and iron. A total of 172 wild mushrooms have been reported home NE India and majority of the wild mushroom is of the order Agaricales. There is a need to make a concerted study of the mushroom biodiversity and its use for economic activity.

INTRODUCTION

Fungi naturally present in soil and rhizosphere of various crops serve as potential biological control agents of various plant pathogens. Species of fungi occurring in the genus Trichoderma have gained significant importance for use as agents for control of several diseases of cultivated crops. The last decade has witnessed a tremendous break-through in the research efforts on biological control of plant diseases in India especially by using species of Trichoderma and Gliocladium. Several economically important plant diseases of a variety of crops were effectively managed by using Trichoderma based biofungicides.

The work on biocontrol of pigeonpea wilt by Bacillus subtilis by Dr. R S Vasudeva and his associates, published as a series of papers in Annals of Applied Biology during 1950 to 1965 can be considered as a starting point for Indian work on biological control of plant pathogens (Mukhopadhyay, 1994).

Introduction

Climate change effect is global and one of the most pressing issues of the 21^st century. It has now emerged as a significant global environmental challenge affecting crop, animal, fish, egg and milk production, water availability, human health, and terrestrial and aquatic ecosystems. Evidences of changes in climate, particularly to the spatial and temporal variability of precipitation and temperature are many and as a result, uncertainty, risks and farmers distress have increased manifold over the current years. India, a developing nation and primarily an agriculturally based country will be highly affected due to greater dependence on agriculture for livelihood of larger proportion of population (Johnson and Hutton, 2014). Anthropogenic forces like rise in population, economic activities, consumption patterns, social behaviour, energy resource utilization and land-use changes in terms of deforestation, use of fossil fuels, industrialization, and race towards development, high concentration of green house gases (GHG) has been released resulting in global warming, a major factor leading to climate change. This heat of climate change has been experienced globally and has affected all forms of life on earth in many ways (Campbell-Lendrum et al, 2015).

As per the fifth assessment report of IPCC (2014), proportional sharing in GHGs emission of various sectors are energy production (34%), and agriculture, forestry and land-use (AFOLU) (24%), mainly contributed by biomass burning and resource intensive agronomic activities (Houghton et al., 2012; Tubiello et al., 2015). Global food security has been threatened by climate change more so in developing nations through changes in soil properties, and is one of the most important challenges in the 21^st century to supply food for the increasing population.

Since climate change is inevitable, we must consider how best we can adapt it, so as to minimize its harmful consequences on the society. For subsistence farmers in India, adaptation in response to changes in climate patterns can be the difference between survival and calamity. There is a need to bring innovations on climate smart agriculture and also necessary agricultural reforms for emerging of a self-reliant India.

Spatial variability in soil parameters including nutrients has been attributed to the parent material, topography, landforms, cropping pattern, fertilization and manuring practices.. Blanket nutrient recommendations further widen the variability and enhance the risk of soil degradation in terms of soil organic carbon and nutrient mining, acidity, green house gas emission, water and environmental pollution. Unfavorable economics on account of blanket recommendation, adversely influence farmers to increase investments in new crop management technologies. This results in low farm productivity and poor soil health, that jeopardize food security and agricultural sustainability.

2.1 Introduction

Government provides various subsidies for agricultural produce. And seeds are also subsidized products. Anyone would like to buy for cheap. Can you imagine what role the government can play in making a product subsidized and making it available for consumption? Let's look at seeds in particular. To understand how the government reaches the rural corners, we need to understand the government model for distribution and control. Every District has a District Development Administrator (DDA) / District Agriculture Officer (DAO). Every district comprises of approximately five Block Offices. Now every Block office has a Subject Matter Specialists (SMS), an Agriculture Development Officer (ADO) and some Agriculture Extension Officer (AEO). Each AEO is assigned a circle to work in (i.e. a designated area). The AEO collects the demand of his circle and reports to the ADO. The ADO confirms the same from every AEO and sends the final report to the SMS. The SMS forwards the demand to the DDA. Every block office is in charge of at least 50 panchayats and every panchayat has 5 villages. So this is how the government reaches the rural population.

14.1 Introduction

The green revolution brought amazing consequences in food grain production but with insufficient concern for agricultural sustainability. The availability and affordability of fossil fuel based chemical fertilizers at farm level in India have been ensured only through imports and subsidies which are largely dependent on GDP of the country. Dependence on chemicals for future agricultural needs would result in further loss in soil health, possibilities of water contamination and calculated burden on the fiscal system. Indiscriminate synthetic fertilizer usage has polluted the soil, water basins, destroyed micro-organisms and eco-friendly insects, made the crop more susceptible to diseases and depleted soil fertility at the primary levels as of today (Pindi, 2012). India is an agricultural based country.

Cereal crops are interchangeably called grain crops. In many publications and correspondence, they are simply called grains or cereals. As of 2012, the top 5 cereals in the world ranked on the basis of production tonnage are rice (paddy), wheat, maize (corn), barley and sorghum. These crops are also among the top 50 agricultural commodities in the world with maize ranking second next to sugarcane. Rice (paddy) ranks third, wheat - 4th, barley - 12^th, and sorghum - 30^th. Another cereal, millet, ranks no. 42 (FAO Stat 2014, updated Aug. 18, 2014). According to Chapman and Carter (1976), “a cereal is generally defined as a grass grown for its small, edible seed.” They also explained that all cereals are angiosperms, monocots, and members of the grass family Gramineae. Similarly, Lantican (2001) defines cereal or grain crops as agronomic crops belonging to the grass family Gramineae or Poaceae which are utilized as staples; the word “cereal” is derived from the most important grain deity, the Roman Goddess Ceres. Among the food grains cereals occupies for most status in human food requirements. Cereals are grown under different agro-climatic (Upland, Low land & Rainfed) conditions and it is most important staple food of about 65% of Indian population. Cereals crop is attacked by a large number of insect pests right from initial to till the harvest of the crops. Brief descriptions of the major crops, major insect pest and appropriate control measures are given below:

5.0. Introduction

Quality control is generally defined as the regulation by law of food manufacture, distribution and sale in order to prevent health hazards and fraud to the consumers. Thus, it becomes a criminal offence to sell adulterated, filthy or contaminated foods. Quality control is the scientific control of production. There are certain basic fundamentals which are required for successful running of the food processing industry. So, for successful quality control in an industry / organization certain management systems are needed. Depending upon consumer requirement and satisfaction, quality management system is based on four important pillars like management responsibility, resource management, product / service realization and measurement, analysis & improvement. This management system is also important for ISO certification in an organization / industry.

India is a “Winter / Summer Home” for most of the Siberian birds such as Siberian Cranes, Greater Flamingo and Demoiselle Crane, also numerous species of birds from other regions of the world. These beautiful birds migrate to India every year during the winter and summer season for food, breeding and nesting. The migratory birds mainly arriving from Siberia and South East Asia move to the different wetland spots of the national parks/ wildlife sanctuaries etc. in India and are also seen in parts of the lakes and settling down in shallow or fresh water ponds. 

1.     Tissue Collection and Culture
    
2.     Trypsinization of Cells
    
3.     Cell Separation by Density Gradient Method
    
4.     Low Speed Separation of Cells
    
5.     Isolation of Lymphocyte
    
6.     Cryo Preservation
    
7.     Isolation of Spleen Cells
    
8.     Isolation of Peritoneal Macrophage
    
9.     Isolation of Blood Dna
    
10.     Differential Count of Leucocytes
    
11.     Slide Gel Electrophoresis
    
12.     Haemagglutination Assay
    
13.     Elisa
    
14.     Western Blotting
    
15.     Widal Test
    
16.     Identification of Y-chromosomes in Cattle using Pcr

2.1    Ecosystem
    2.1.1 Major Components of Ecosystems
    2.1.2 Energy and Matter Flow in Ecosystems
    2.1.3 Various Types of Ecosystems
    
2.2    Biodiversity
    2.2.1 Genetic Diversity
    2.2.2 Species Diversity
    2.2.3 Ecosystem Biodiversity
    2.2.4 Values of Biodiversity
    2.2.5 Threats of Biodiversity
    2.2.6 Endangered and Endemica Species of India
    2.2.7 Biodiversity Conservation