eChapters

1. GENERAL INTRODUCTION

Agriculture, as one of the most important economic sectors in Jordan, is under increasing pressure due to rising population, consumer affluence, pressure from globalization and a shrinking resource base. Previous production challenges in Jordan have been met largely through improvements in traditional agricultural inputs such as seeds and agrochemicals, but the present challenges need different solutions. Better management, which involves higher degrees of information and knowledge, is widely seen as a way to address these challenges. The potentials that ICT has to offer range from the sharing and re-use of data, research findings, lessons learned and best practices among R&D institutions to developing quick response mechanisms for agricultural and natural resources crises situations; from permitting informed decision making among the agricultural officials to sounder policy making among the legislators; from improving the extension delivery systems in the rural areas to bringing e-Commerce to the farmers.

Agricultural extension is about the application of information into knowledge and adoption, such as application of scientific research to agricultural practices through farmer training. ICT broadly defined as facilitation by electronic means the creation, storage, management and dissemination of information. Two types of ICT – old and new are practiced in extension service; the former refers to radio and TV which are low cost and require little skill to use while the latter forms of ICT include networked computers, satellite-sourced communication, wireless technology and the internet. Assume key factors explaining different ICT taken up by country are: per capita income; levels of education; the rural concentration; and dispersal of a country’s population.

The development of ICT in Jordan is fast and the Jordan’s IT capacity related to agro-information dissemination needs to be vastly improved at the local level to allow the effective horizontal transmission of information and communication between the farmers and institutions. However, technological challenges have still to be addressed such as the lack of trained communicators, poor ICT infrastructures high costs and limited access to ICTs and lack of relevant content.

1. INTRODUCTION

Today’s technological advancement have reached a level where a farmer can have access to information and tools to manage his mechanized field operations. They can now measure, evaluate and deal variability with infield (e.g. soil fertility, water availability and yield) that was known to exist previously but was not manageable, to his advantage. The ability to handle variations in productivity within a field and maximize financial return, reduce waste and minimize impact on the environment has always been the objective of an enterprising farmer, especially those with limited land resources and those who advocate sound agriculture practice.

This concept is not new. What is new is the ability to automate data collection and documentation and the utilisation of this information for strategic farm management decision in the field operations through mechanisation, sensing and communication technology. Such an approach in agriculture production management gives rise to what is now termed as Precision Farming (PF), Precision Agriculture (PA), Prescription Farming (Precision farming), Site Specific Agriculture (SSA), Soil Specific Crop Management (SSCM), Spatially Variable Crop Production (SVCP) etc.

1. INTRODUCTION

‘Fertigation’ is the technique of supplying dissolved fertilizer to crops through an irrigation system (Haynes, 1985). When efficient irrigation system combined with both nutrients and water, it can lead to obtain higher yield and preferable quality desired marketable produce.

Often, side-dressings of straight solid fertilizers are found to be the management constraints. Most of the growers have the experience of how much the applied fertilizer is either washed from the soil in run-off or leached below the root zone.

Continuous small applications of soluble nutrients have the benefits like labour, due to fertilizer being placed uniformly around the plant roots and allow savings/economy rapid uptake of nutrients by the plant.

Functions of Livestock Housing

The most important purpose of livestock production is to increase the conversion efficiency of feed energy into the livestock products like milk, eggs, meat, wool, hair, hides and skins, draught power and manure (fertilizer). Scientific housing of livestock is necessary in order to get higher productivity from them. A proper housing design/structure should alter/modify the micro-climate inside the house so that animals are least exposed to the extremes of climatic conditions. Moreover, it should also provide better control of diseases & parasites, desirable working conditions for farm staff & better living conditions for the animals, better integration of various routine farm practices, opportunity for higher labour efficiency at farm, protection from predators & thieves, opportunity to express species specific natural behavior patterns and it must not compromise the welfare of the animals. Some of these functions are discussed in subsequent sub-headings.

Plant body consists of numerous microscopic box like components called cells. The word cell has been derived from the Latin word cellula, meaning a small room. The descriptive term for this smallest living biological structure was coined by Robert Hooke in a book he published in 1665. When he compared the cork cells, he saw through his microscope to the small rooms monks lived in. The cell is the basic structural and functional unit of all known living organisms. It is the smallest unit of life, which is classified as a living thing and is often called the building block of life (Maton et al., 1997). It is defined as a mass of protoplasm surrounded by a membrane- the plasma membrane- within which complicated chemical reactions are going on.

An experiment is a systematic process or activity which leads to collection of information on certain objects to give an answer to the objectives of the researcher.

The experiment in which certain absolute values like average, correlation coefficient, median, mode, etc are worked out to describe the population is known as absolute experiment.

The experiment in which the effects of different objects under consideration are compared is known as comparative experiment.

The variable whose change we wish to study is called as Response variable. For example- yield, mortality rate of insects etc.

The variable whose effect on the response variable we wish to study is termed as Factor. For example - variety, fertilizer, insecticide etc.

Here factor is the independent variable and response variable is the dependent variable.

The various levels of a factor whose effect on the response variable we wish to study are known as Treatment.

In the last chapter, we have broadly introduced the concept of tracer hydrology and also the concepts of isotopes as tracers, their characteristics and measurement techniques. In this chapter let us see the basis of application of each group of isotope tracers, injected and environmental.

What are the different groups of isotope tracers used in hydrology and how are they classified?

The knowledge on the fate of pesticides, after application in the environment is useful to research workers associated with their safe and effective use. It is important to know whether a xenobioticwillpersist orwill be inactivated. Frequently persistence is desirable for sustained control. However, for many cases, rapid detoxificationof the compound may be required to avoid cumulative effects. Most of the pesticides are not very soluble in water andtheir oxidation orhydrolysis (or both)leads to formation of polar groups. Such reactions are called primary metabolic reactions, often, but not always. Theproducts ofthese primary reactions undergo secondary changes whereby they are conjugated with endogenous substances to form molecules that are more readily excreted. In higher animals, these changes facilitate the transportation of metabolites of pesticides in blood, which in turn leads to their eventual excretion.

• General Consideration

• Post-mortem examination of large animals

• Post-mortem examination of poultry

• Steps in post-mortem examination

• Writing of post-mortem report

• Collection, preservation and dispatch of specimens for laboratory diagnosis

General Consideration

Necropsy is examination of animal after death also known as post mortem examination. It helps in diagnosis of diseases and their control. It is said that “Necropsy is a message of wisdom from dead to living”. Necropsy include systemic examination of dead animal, recording of pathological lesions, their interpretation to make diagnosis of disease. Sometimes it is difficult to arrive any conclusion merely based on gross examination of dead animal. Then one should seek the help of laboratory examinations such as Histopathology, Microbiology, Immunology and Toxicology for confirmation.

Leafy vegetables are rich sources of provitamin-A, vitamin C and minerals like calcium, magnesium, iron, etc., They are the riches sources of roughes or fibres essential in human diet. The ICMR recommended dietary allowances of green leafy vegetables for adult women is 100g/day and men are 40g/day while for school children above 10 years it is 50g/day. Greens are rich in vitamins and minerals essential for healthy functioning of organs of body. Amaranth, beet leaf, spinach, fenugreek, etc., are the major leaf vegetables grown in India. In addition, a number of under-utilized annual crops are also grown as leaf vegetables in specific regions. Tender stems and leaves of a number of perennial crops are rich sources of vitamins and minerals and are used for cooking.

10.1. Amaranth (Amaranthus sp)

Amaranth is the most common leaf vegetable grown in India. Amarnath is an annual herb with erect growth and scarce to profusely branching habit. Stem is succulent and green or purple or mixed shades of these two. There are two sections in Amaranthus, viz., Amaranthus and Blitopsis. Majority of leaf cultivars grown in India belong to Amaranthus tricolor. Among the several kinds of greens Amaranthus occupy a special place because it has a large number of species grown in one or the other part of country.

Some of the important improved varieties released are CO-2 and CO-5 from TNAU, Coimbatore, Pusa Kiran, Pusa Kirti and Pusa Lal Choulia from IARI, New Delhi, Arka Arunima and Arka Suguna from IIHR, Bangalore. Amaranth are popular all over India by different names. While in northern parts it is popularly known as choulia, in south it is popularly called as keerai or cheera or koora or soppa. The general composition of amaranth is given below:

2.1 INTRODUCTION

Owing to a varied agro-ecological and eco- edaphic condition prevalent in one or other part of the country, quite a large number of crops are grown in different parts of India. India is rich in bio-diversity with four hotspots out of twenty-five in the world. About 356 domesticated plant species having economic and botanical importance and 326 species with their wild relatives are found in Indian sub-continent. Besides the above, 9500 other plant species are also available. More than 50 different types of fruits, 50 different types of vegetables, 95 types of spices and condiments, medicinal and aromatic plants, plantation crops and ornamental crop plants have been recorded. To avoid confusion and identity, the horticultural plants are grouped into different categories based on similarity or dissimilarities. Grouping of the crop plants with similar characteristics is referred as classification.

ABSTRACT

A number of secondary metabolites are produced by cyanobacteria involving the non-ribosomal peptide biosynthetic pathway. Some of these compounds have potential biotechnological applications, whereas others (the cyanotoxins) are undesired due to their toxicity to animals. The occurrence of toxic cyanobacterial blooms in freshwater bodies that are used as source for human consumption, recreation and irrigation are frequent nowadays due to increasing artificial eutrophication of these environments. It is important to monitor toxin-producing strains in order to prevent the adverse effects caused by their toxins to human and animal health. Thus, the development of rapid and sensitive methods for the detection of cyanotoxins is important as they could be useful to monitor water supplies and contribute for watershed monitoring strategies. Current methods include cell counting, microscopic identification and toxin analysis by biochemical and analytical techniques. However, in recent years, molecular biology techniques, such as polymerase chain reaction (PCR), have been used to amplify specific regions within biosynthetic genes for rapid and sensitive identification of toxic cyanobacteria. The aim of this chapter is to provide an update of cyanotoxin biosynthesis and discuss the advances and limitations of molecular biology regarding its application as indicative of cyanotoxin production.

Agriculture in India is not of recent origin, but has a long history dating back to Neolithic age (7500–6500 B.C). It changed the life style of early man from nomadic hunter of wild berries and roots to cultivator of land. Agriculture is benefited from the wisdom and teachings of great saints. The wisdom gained and practices adopted have been passed down through generations. The traditional farmers have developed the nature friendly farming systems and practices such as mixed farming, mixed cropping, crop rotation etc. The great epics of ancient India convey the depth of knowledge possessed by the older generations of the farmers of India. The modern society has lost sight of the importance of the traditional knowledge, which had been subjected to a process of refinement through generations of experience. The ecological considerations shown by the traditional farmers in their farming activities are now a days is reflected in the resurgence of organic agriculture.

Historical Perspective of Organic Farming

The available ancient literature includes the four Vedas, nine Brahnanas, Aranyakas, Sutra literature, Susruta Samhita, Charaka Samhita, Upanishads, the epics Ramayana and Mahabharata, eighteen Puranas, Buddhist and Jain literature, and texts such as Krishi-Parashara, Kautilya’s, Artha-sastra, Panini’s Ashtadhyahi, Sangam literature of Tamils, Manusmirit, Varahamihira’s Brahat Samhita, Amarkosha, Kashyapiya-Krishisukti and Surapala’s Vriskshayurveda. This literature was most likely to have been composed between 6000 B.C. and 1000 A.D. The information related to the biodiversity and agriculture (including animal husbandry) is available in these texts. Rig-Veda is the most ancient literary work of India. It believed that Gods were the foremost among agriculturists. According to ‘Amarakosha’, Aryans were agriculturists. Manu and Kautilya prescribed agriculture, cattle rearing and commerce as essential subjects, which the king must learn. According to Patanjali the economy of the country depended on agriculture and cattle-breeding. Plenty of information is available in ‘Puranas’, which reveals that ancient Indians had intimate knowledge on all agricultural operations. Some of the well known ancient classics of India are namely, Kautilya’s‘Arthashastra’; Panini’s ‘Astadhyayi’; Patanjali’s ‘Mahabhasya’; Varahamihira’s ‘Brahat Samhita’; Amarsimha’s ‘Amarkosha’ and Encyclopedic works of Manasollasa. These classics testify the knowledge and wisdom of the people of ancient period. Technical book dealing exclusively with agriculture was Sage Parashara’s ‘Krishiparashara’ in 1000 A.D. Other important texts are Agni Purana and Krishi Sukti attributed to Kashyap (500 A.D.).

Optimal quality organic produce that combines the desired textural properties, sensory shelf-life, and nutritional content results from the careful implementation of recommended production inputs and practices, careful handling at harvest, and appropriate postharvest handling and storage. This section will focus on an overview of general postharvest handling considerations unique to the marketing of registered or certified organic produce.

Maturity index for fruits and vegetables

The principles dictating at which stage of maturity a fruit or vegetable should be harvested are crucial to its subsequent storage and marketable life and quality. Post-harvest physiologists distinguish three stages in the life span of fruits and vegetables: maturation, ripening and senescence. Maturation is indicative of the fruit being ready for harvest. At this point, the edible part of the fruit or vegetable is fully developed in size, although it may not be ready for immediate consumption. Ripening follows or overlaps maturation, rendering the produce edible, as indicated by taste. Senescence is the last stage, characterized by natural degradation of the fruit or vegetable, as in loss of texture, flavour, etc. (senescence ends at the death of the tissue of the fruit). Some typical maturity indexes are described in following sections.

ABSTRACT

The continuing depletion of the stratospheric ozone layer mainly due to release of man-made atmospheric pollutants such as chlorofluorocarbons (CFCs) have resulted in the increase of solar ultraviolet-B radiation (UV-B; 280-315 nm) reaching to the Earth’s surface. UV-B is a small (less than 1% of total energy) but highly active component of the solar spectrum that can penetrate to biologically significant depths in lakes, ponds, rivers and oceans. It has been demonstrated that UV-B can cause wide ranging effects including mutagenesis, destruction of proteins/enzymes, inhibition of a number of vital metabolic processes and formation of thymine dimers in DNA leading to death of a number of organisms. A number of microbes including strict photoautotrophs always grow in lighted habitats and thereby always sense and face the stress of solar UV-B radiation. Similarly, humans are also exposed to varying levels of UV-B radiation depending upon the altitudes and latitudes of the location. A wide ranging effect of UV-B such as cataracts, skin cancer, immunosupression etc. has been reported in human. Damaging effects of increased UV-B radiation has also been shown in a number of microbes. These effects include inhibition of growth and survival, decrease in photosynthetic pigments, loss of PS II and RuBISCO activity, inactivation of nitrogenase enzyme and inhibitory effects on several other metabolic processes. Among photosynthetic pigments, phycobiliproteins seem to be the primary target of action since phycobilisomes are completely disintegrated after UV-B exposure. In this contribution an attempt has been made to put in perspective the main effects of UV-B radiation on microbes and human health.

ABSTRACT

Frankia is a gram-positive, microaerophilic, actinomycete that enters into symbiotic associations with a number of woody dicotyledonous plants called actinorhizal plants. Frankia can fix atmospheric nitrogen through such associations. The actinorhizal-Frankia association is beneficial for the environment, since it increases the fertility of soils. Extensive studies on the biochemical and molecular aspects helped in the classification of Frankia. PCR-RFLP studies of the 16S rRNA and the nif regions of Frankia revealed considerable information regarding the diversity of Frankia strains, isolated from different parts of the world. The completion of three whole genomes of Frankia has bolstered the study of the molecular organization of the genome. Comparative genomics study of the three complete genomes revealed that, the strains reflected the biogeographical history of the host plants they infected. Striking similarity in the codon usage patterns highlights the fact that they may have evolved as a unit. In the present review we highlighted the taxonomy of Frankia and the host plants, the Frankia-actinorhizal association, regulation of infectivity, biochemical and molecular characterization, phylogeny and genomics of Frankia and stressed the need for metabolomic study of the Frankia-actinorhizal association.

Diagrammatic Presentation of Data

The quantitative data when classify are converted into averages and if the number of average is large then it is not possible to draw a conclusion from their large numbers of averages. Moreover quantitative data are dull, confusing, boring for many of us. Therefore, a statistical device to make such confusing data more attractive was developed i.e. if such complex data are presented by geometric f igures, pictures, graphs or curves then it will become more attractive and more impressive, is called as diagrammatic representation of data. These diagrams are nothing but the use of geometrical figures to improve the overall presentation and offer visual assistance for the reader.

Types of Diagrams

Generally, diagrams are made for a special series or a time series and they are divided into five different categories:

1) One dimensional diagrams

2) Two dimensional diagrams

3) Three dimensional diagrams

4) Pictograms

5) Cartograms

1.    Introduction
    
2.    Structure of Protein
    2.1     Primary structure
    2.2     Secondary structure
    2.3     Turns and Bends in the Polypeptide Backbone
    2.4     Tertiary structure
    2.5     Quaternary structure
    
3.    Protein Denaturation
    
4.    Conditions Affecting Protein Structure
    
5.    Fish Proteins
    5.1    Sarcoplasmic proteins
    5.2    Myofbrillar protein
    5.3    Stroma proteins
    5.4    Functional properties of fish proteins
    
References
    
Further reading

1.    Introduction
    
2.    Different Forms of Value Added Products
    
3.    Production of Fish Steaks
    
4.    Battered and Breaded Products
    
5.    Minced Fish Based Products
    5.1    Fish cakes
    5.2    Fish cutlets
    5.3    Fish sausage
    5.4    Dehydrated salted fish cakes
    5.5    Fish fingers
    5.6    Fish burgers
    5.7    Fish balls
    5.8    Fish wafers
    5.9    Fish soup powder
    
6.    Surimi and Surimi Based Products
    6.1    Kamaboko
    6.2    Chikuwa
    6.3    Tempura
    6.4    Hampen
    
7.    Modern Seafood Analog Products
    7.1    Imitation crab meat
    
8.    Marinated Fish Products
    
9.    Fermented Fish Products
    9.1    Fish pickle
    
10.    Sous Vide Cook-Chill Products
    
11.    Precooked Seafood Entrees
    
12.    Future Needs
    
References

A study was conducted to assess utilization pattern of ICT based Information by the livestock owners in using information communication technology with special reference to enhanced livestock production, in Mathura district of Uttar Pradesh. A total of 80 farmers were selected for study. The results showed that cent percent of the farmers had availability and accessibility of mobile phones as well as television. Majority of the livestock farmers are regularly using ICT tools for information dissemination. Majority (85.00%) of respondents were saying scientific information of livestock is available on mobile followed by (25.00%) of respondents said this scientific information are available on computer. Apart from these (68.75%) of respondent usage of mobile as ICTs tools for getting health related information of animals. Mobile phone was the most frequently and widely used while radio was least used ICT tool among the livestock farmers being used for the purpose of getting information.