eChapters

1. Basic Information

Benin is situated in West Africa at inter-tropical zone between the parallels 6°30 and 12°30 North and the meridian lines 1° and 3°40 East. The Republic of Benin is limited in the north by the Republic of Niger and to the North-West by Burkina Faso, in the south by the Atlantic Ocean, in the west by Togo and in the east by the Federal Republic of Nigeria. The Republic of Benin extends over 700 km length from the Atlantic Ocean to river Niger. Its width varies from 125 km, along the coast, to 325 km, in the northern part. It covers an area of 112.622 km².

With the third General Census of the Population and Habitat in February 2002, Benin counted 6,769,914 inhabitants thereby giving an average density of 60.11 inhabitants per km². Currently the population is estimated to nearly 8 million inhabitants with a natural rate of increase of 2.8 per cent. The average densities estimated from the last census of the population vary between 16 inhabitants per km² in the department of Borgou and 322 inhabitants per km² in the department of Atlantic.

1. Basic Information

1.1. Location and Size
 
Ghana, lying between latitudes 4º 30’ to 11ºN and longitudes 1º 10’E to 3º15’W, shares common borders in the east, north and west with the Republics of Togo, Burkina Faso, and Cote d’Ivoire respectively.  The country covers a total area (including water bodies) of 238,537 square kilometres.  

1.2. Climate
 
Ghana has a tropical climate with temperatures ranging between 21ºC and 32ºC. Mean annual rainfall in Ghana is generally lower in the northern part of the country (800-900 mm) and increases southwards (2100-2200 mm) albeit a small part of the eastern coastal belt has low mean annual rainfall of 700-800 mm. Humidity figures range from 78 to 87 per cent across the country. Although Ghana cannot be described as a mountainous country, there are a number of highlands and steep escarpments in the middle portion and some parts of the northern zone. The land is generally flat with more than half of the country at an altitude of 200 m.

Abattoir: An establishment where animals are butchered is known as abattoir. It is also known as slaughterhouse.

Abiotic: Abiotic means any factor which is not biological / a biological and especially there is no involvement of the organisms in synthesis of certain compounds.

 Abnormal milk: It is milk that is not smooth and homogenous but is flaky, ropy, stringy, slimy, water, discoloured or bad flavoured. It may be due to animal sickness or disease or due to excessive medicines given or uncleaned milk condition.

 Abomasum: It is the fourth stomach of the Ruminants which is lying close to the

Omasum or the third stomach, in which digestion gets completed by the supply of the digestive juice. It is also called Reed stomach, rennet stomach, rennet-bag, or reed

tripe and maw (Plate 1).

 Abrassive peeler: It is equipment comprising a rotating drum lined with carborandum (an abrasive material) in which certain vegetables like potato and ginger are tumbled and exposed to the abrasive action of the carborandum lining, thereby facilitating separation of peel from the vegetables (Plate 2).

1. Introduction

Iran, with an area of 1648 thousand sq.kms.,  is situated in the eastern portion of the northern hemisphere, in the south west of Asia, and is considered as one of the Middle East countries. Iran is a mountainous country with a variety of climates. The average temperature and rainfall for the whole country are quoted as 18ºC and 240 mm respectively (CAPES, 1996). The country is also organized into 28 provinces. Over the past two decades, rapid rate of population growth has been a major source of concern in Islamic Republic of Iran. The population of the country passed the 60 million figures in 1993 and is projected to reach 86 million by the year 2010. In fact, the Iranian population has doubled in this period (CAPES, 1996). For example, according to the 1991 census, the female population of 15 years and above was 15 million (Anonymous, 1998). However, thanks to considerable investments and well-organized and directed national population planning program, population growth rate is now 1.5 percent in the urban and two percent in the rural areas. At the national level, the figure is 1.65 percent (CAPES, 1996).

INTRODUCTION
An Agro-Processing Centre (APC) is a facility that processes agricultural products to enhance farmers’ income. APCs are capable of both primary and secondary processing, and they also serve as hubs for training, demonstrations, and offering custom services. These centres are designed to help farmers add value to their raw produce, allowing them to establish a stronger presence in the agriculture sector while mitigating the effects of climate change and market fluctuations.The success of any agro-processing venture heavily depends on careful planning and strategic decision-making in its initial stages. One of the most critical factors in ensuring the efficient operation of an agro-processing facility is site selection, which involves evaluating potential locations based on several key parameters such as accessibility, availability of raw materials, labor availability, infrastructure, and proximity to markets. A well-chosen site can significantly reduce transportation costs, ensure a steady supply of inputs, and enhance the overall profitability of the enterprise.
Once the site is selected, the next crucial step is plant layout. A thoughtful and efficient layout maximizes space utilization, streamlines workflows, minimizes waste, and optimizes the use of resources such as water and energy. The layout should facilitate smooth movement of raw materials through various processing stages and ensure the safety of both workers and products. An ideal plant layout not only improves operational efficiency but also adheres to industry standards and regulatory requirements.Additionally, preparing a comprehensive project report is essential for securing financial backing and guiding the implementation of the project. The project report serves as a detailed blueprint, outlining the objectives, scope, financial projections, market analysis, and risk assessments. It provides stakeholders, including investors and lenders, with a clear understanding of the project’s viability and potential returns. The process of preparing a project report

Abstract

During the past five decades, the role of nitrogen (N) fertilizer in augmenting foodgrain production has widely been recognized the world over. In Indian soils, N deficiency is recognized as a universal problem and its consumption has increased by more than 300 times during the last 60 years.

In countries like India where majority of the population are vegetarians, leguminous vegetables serve as the major source of protein in the diet. In the developing third world countries, especially for the poor, the major protein source in the diet are vegetable legumes. Most leguminous vegetables are rich in phosphorus, calcium, iron and a number of essential vitamins. Crops like soybean, groundnut and Bamabara groundnut are also rich in fats which are needed by the body to absorb vitamin A.

Abtract: Dahlia, tuberous flowering plant, is valued for potted flowering and garden crop worldwide. The genus contains ~85 species native to Mexico, central America and Columbia. Numerous phenotypes (star/ anemone/ paeony/ decorative/ pompon/ cactus/ water lily flowered) and cultivars (giant/ large/ small/ miniature/ ball/ pompon/ mignon single) are available on world market. Cultivated dahlias are allotetraploids with great diversity in flower colour/ forms. Limited genetic information and trait heritability has been established for this crop. Precise elucidation of the genes involved in the flavonoid biosynthesis pathway has enabled in the creation of new flower colours or modification of pigment production and expression discussed. Research succeeded in mutation breeding and interspecific hybridization and colourful dahlia varieties have been developed by individual enthusiasts, nurserymen and flower breeders. Complicated genetics, heterozygosity often pose significant challenges to breeders. Future crop ideotypes are proposed to continue transformation of this important crop during the next millennium.

Microbial Based Formulations examines preparations produced through beneficial microorganisms, fermentation, and indigenous microbial resources. It covers Waste Decomposer, Effective Microorganisms, Fermented Plant Extract, EM-Bokashi, Indigenous Microorganisms, Fermented Plant Juice, Fermented Fruit Juice, Oriental Herbal Nutrient, and lactic acid bacteria. Water-soluble potassium, phosphoric acid, and calcium preparations, brown rice vinegar, loess powder, fermented seawater, and microorganism-enriched mixtures are also discussed. The chapter demonstrates how microbial activity and fermentation can transform locally available materials into agricultural inputs. Together, these formulations illustrate approaches for nutrient management, plant growth support, compost enrichment, and ecological farming using biologically mediated processes and farm-level resources. for preparation.

Water is indispensable for human, animal and plant life. It is a major component of all organisms some of which contain more than 90% of water. Water is a constituent of protoplasm. It maintains turgidity of cells which is essential for stomatal opening, expansion of cells and for different physiological processes. Water is also required for translocation of nutrients and dissipation of heat.

16.1 Irrigation

Irrigation is generally defined as the artificial application of water to soil for the purpose of supplying the moisture essential for plant growth.

However, a broader and more inclusive definition of the term irrigation is the application of water to the soil for any number of the following six purposes —

1. To add water to soil to supply the moisture essential for plant growth.
2. To provide crop insurance against short duration drought.
3. To cool the soil and atmosphere, thereby making more favourable environment for crop growth.
4. To wash out or dilute salts in the soil.

Evaluation Theory vs Practice

Theory based evaluation is an approach to evaluation (i.e., a conceptual analytical model) and not a specific method or technique. It is a way of structuring and undertaking analysis in an evaluation. A theory of change explains how an intervention is expected to produce its results

What are Evaluation Theories?

7.1 Introduction

Food processing has become one of the most competitive sectors in recent years. With increasing consumers’ demands, food industry needs to keep updating technology. These efforts are focussed at improving the organoleptic quality and nutrition of food and improve its keeping quality. This drives the industry to look for newer technologies which include new products as well as new processes. Some of the new processing technologies include non-thermal processes such as high pressure processing, pulsed electric fields and ultrasound processing. Advanced thermal processing techniques such as ohmic heating, inductive heating, extrusion and infrared heating have also been developed. Innovative methods for improving food quality through irradiation, removal of heat and moisture from food are now available. Newer packaging techniques now help to improve shelf-life and attractiveness of the food products and cater to the biodegradability of the packaging material. Hence, there is abundance of new products that have now become part of our daily life.

Food nanotechnology has its long history when the first step of revolution in food processing and improvement in quality of foods was introduced by Pasteur to kill the spoilage bacteria (1000 nm). Later, Watson and Crick’s model of DNA structure, which is about 2.5nm, opened the gateway of applications in biotechnology. Nanotechnology is defined as the design, production, and application of structures, devices, and systems through control of the size and shape of the material at the nanometer (10^-9 of a meter) scale. Nanotechnology is one such technology that has the potential to revolutionize the food industry. Taniguchi first used nanotechnology in 1974 to describe production technology at ultrafine dimensions. The word “nano” means “dwarf” in Greek and one nanometer is equivalent to 10^-9 m. Objects of this scale are not visible through the human eye or the ordinary optical microscope. A nanometer (nm) sized particle measures one billionth of a meter. A human hair measures 80,000 nm while a DNA strand is 2.5 nm wide whereas a protein chain is 5nm in diameter. Nanotechnology can be applied to develop nanoscale materials, controlled delivery systems, contaminant detection and to create nanodevices for molecular and cellular biology. Nanotechnology may be defined as the understanding and management of matter at dimensions of roughly 1-100 nanometers. Unique behavior of matter at the nanoscale enables novel applications. Nanoscale science, engineering, and technology can be used for imaging, measuring, modeling, and manipulating matter at this length scale. Range of sizes of nanomaterials in the food sector and their relative position on nanoscale/microscopic scale are listed below.

With the current food production level of 275.11 million tonnes, India has to step up food grain production by next decade to feed the burgeoning population (Report Ministry of Agriculture). India with 2.3% of the global geographical area, supports about 16.8% human population, 20% of the world’s livestock. However, per capita availability of land for producing agricultural commodities has declined from 0.34 ha in 1951 to about 0.23 ha in 1980 and 0.15 ha in 0.15 ha during 2015 and it is expected to decline further to about 0.09 ha by 2050 A.D. With the possibility of horizontal expansion or putting more land under cultivation being remote, further augmentation in yield in Indian agriculture will be forced more and more into marginal or problematic soils accompany about 57% geographical area with increasing competition for good quality lands.

9.1 Introduction

Food quality and safety are central issues in food economics today. A number of developed countries (EU, UK, US) has imposed a number of new regulations to track food products across the supply chain which is forcing the companies to invest in new automated approaches for their implementations. These solutions facilitate better process efficiency with more productivity, quality control in production lines, lower manufacturing costs with higher profit margins, and also help to achieve improved presentation as customers request. The high labour costs in developed countries make cost-cutting inevitable to remain competitive production. The growth in products packaged for the market, the increasingly strict hygiene regulations, the need to reduce risks at work, cut costs, and control product quality are all calling for the development of technologies that enable robots to be used for these tasks. In fact, robotics has a great opportunity in this industry. But the variation in physical properties of various food products and the necessity to avoid damaging them, make it necessary to seek flexible handling solutions for a wide range of products.

The robotics industry is looking into a bright future. As per the report given by the Statistical Department of International Federation of Robotics (IFR), it was projected that between 2014 and 2016 worldwide robot sales will increase by about 6% on average per year. Ten years ago, global sales figures were hovering around 80,000. So, three key factors for the boom - factory modernization, increases in production capacity and rising demand from a number of emerging markets.

Endowed with varied agro-climatic situations, topography and soil type, India has been a leading vegetable producing country in the world occupying the second
position in vegetable production after China with an annual production of 87.53 million tonnes from 5.86 million hectares having a share of 14.4 per cent to the world production. With commercial cultivation of as many as 61 annual and 4 perennial vegetables, India is the most diverse vegetable growing country in the world (Prakash et al., 2006).

Introduction

Water pollution is a significant issue that damages the quality of aquatic ecosystem. The pollution of water bodies is caused by several point and non point sources. Among them, wastewater released from livestock farms poses a potent risk for environmental pollution accelerating disease load and premature deaths (Vaishnav et al. 2023). Numerous small and large scale livestock farms are being operated around world to compensate the increased food demand from about 200 kcal per person per day in 2000 to about 400 kcal per person per day in 2050, South Asia's food demand for livestock products is expected to almost double (Thornton, 2010). Significant dietary changes toward animal based foods accelerates the livestock production (Springmann et al. 2016).

An aquarium functions as more than a simple container for aquatic life— it is a carefully balanced miniature ecosystem designed to replicate the natural environment of its inhabitants. Key elements that support both the biological health and visual aesthetics of an aquarium include substrates, gravels, and decorative features. These components are essential for creating a stable, appealing, and lifesupporting
underwater world.
Substrates serve as the foundational layer in any aquarium setup and fulfill several critical roles—biological, chemical, and mechanical. They offer a surface for beneficial bacteria to thrive, help root aquatic plants securely, impact water chemistry by altering pH and hardness, and shape the visual theme of the tank. The type of substrate used—be it sand, gravel, nutrient-rich soil, or crushed coral—depends on the specific aquarium setup, whether it’s a freshwater, marine, planted, or biotope-focused tank.
Gravels, a common form of substrate, combine utility with decorative value. Available in diverse sizes, textures, and colors, they contribute to the tank’s visual appeal while also supporting aeration and microbial life in the substrate layer. Choosing the right type of gravel depends on the species of fish and plants involved, as well as the intended function of the tank.
Decorative elements such as rocks, driftwood, ceramic structures, and aquaticsafe ornaments add character and structure to the aquarium’s layout. Beyond aesthetics, they serve practical purposes—providing shelter, defining territories, and encouraging natural behaviors like hiding or exploring. These additions can also help recreate specific natural settings, like riverbanks or coral reefs, thereby increasing the aquarium’s realism and educational value.

5.1 Introduction

Waste from the dairy processing industry is generated through production of milk products at different stages. With diversification of dairy products, by-products have also gained some importance. Utilization of dairy by- products improves economical and nutritional aspects of milk production and reduces environmental pollution originating from dairy waste. Important dairy by-products include butter milk, ghee residues and whey, the major waste arising from production of cheese, casein, paneer and chhana. Whey arises as a result of protein coagulation/precipitation in the preparation of these products. It is used for manufacture of whey powder, whey drinks and lactose (milk sugar). Whey protein concentrates can be prepared by modern technological methods like ultra-filtration and reverse osmosis. Desi buttermilk is an important domestic beverage since olden days. Ghee residue can be utilized for manufacture of chocolate burfi, samosa filling etc. Hence, utilization of dairy waste particularly whey, butter milk and ghee residues obtained during manufacturing of various main products, has not only increased the availability of nutritional milk foods but has also indicated the profitable method of by products utilization and helped in minimizing the problems of pollution. This chapter focuses on utilization of these dairy industry wastes.

Recent pandemic (COVID-19) impacted global economy significantly and increased economic disparity. Vaccines are significantly beneficial and cost effective compared to other public healthcare preventives. Vaccines reduce hospitalisation, treatment costs and associated morbidity and mortality. Although COVID-19 vaccination and natural viral infection protected against reinfection, it waned in part due to emerging novel variants. Waning immunity from vaccine and natural infection are documented, and it was more so in severe hospitalised COVID-19. Many countries developed their own vaccines successfully to counter as COVID-19 became global. Vaccines needed updates to effectively fight COVID-19 as the wild strain constantly mutated. Among the intrinsic, perinatal, extrinsic, environmental, behavioural and nutritional aspects, the host factors included antibiotics usage pattern, sleep habits, physical activities, smoking habit and alcohol intake. Similarly, the external factors influencing vaccine response included childhood vaccination, early-age infections, nutrient supplements soon after birth, and breastfeeding pattern. Vaccination time also affected the efficacy. Forenoon vaccination developed less breakthrough infection compared to afternoon or evening vaccination due to varying immunological responses like immune cell functions, recruitment and transport, owing to circadian rhythm. Although vaccination side-effects are there, almost all vaccines are reportedly safe, effective and prevented serious illness, hospitalisation and death. Vaccine usually takes two weeks to manifest, and it prevented 14·4–19.8 million pandemic fatalities globally in 185 nations in a single year during December 2020 and December 2021. It was necessary that the boosters alongside vaccines enhanced immunological effects and provided extended protection. Thus, vaccine and booster design and development, dosing, targeted immunisation, cost-efficacy and vaccine acceptance are challenges to address. Government, not-for-profit organisations, health agencies and researchers may systematically analyse, justify and validate vaccine R&D and vaccinations economics. This chapter comprehends biological, commercial and economic benefits and impacts of booster dose in vaccination drives, and the roadmap ahead.

11.1 Introduction

Phytosterols or plant sterols are bioactive plant constituents having similar chemical structure and biological functions as cholesterol (cholest-5-en-3b-ol), but differ in their side chain configuration. They are non-nutritive compounds with chemical structure differing from that of cholesterol only by minor modifications like in the structure of their side chain by a methyl or ethyl group at C-24. Sitosterol and campesterol have an ethyl and a methyl group at C-24, respectively (Fig. 11.1). Phytosterols present a tetracyclic ring and side chains linked to C-17 that differ according to sterol compound same as cholesterol, to which they resemble structurally as well as biosynthetically. Saturated form of sterols referred to as stands, occurring in small amounts, mainly in cereals are represented by the absence of the double bond at the D5 position. Phytosterols represent a part of the broad group of isoprenoides and are 28- and 29-carbon atom steroid alcohols naturally occurring in plants. Phytosterols and phytostanols are triterpene compounds, found ubiquitously in plants which can only be synthesized by plants, whereas humans and animals obtain them from their diet.