eChapters

Dew acts as a source of moisture for the crop plants. It causes reduction in transpiration rate and saving of soil moisture reserves. Dew fall helps in insect-pest and diseases spread in crop plants.

14.1 Dew and Conditions for Dewfall

The radiational cooling during night causes the moisture to saturate and further cooling results into condensation and depositing this moisture in the form of tiny droplets on the grasses, vegetative and other non-conducting surfaces. This deposition form is known as dew. Clear nights, low wind velocity in the order of 1.0 to 3.0 m/s, presence of moderate to high moisture (RH = 75%) and sufficient radiational cooling are the four necessary and conductive conditions for the occurrence of dew.

Pressure of air at a given place is the force exerted against a surface by continuous collision of gas molecules. Pressure may be defined as the force per unit surface area.

Diseases of metabolic origin are commonly known as metabolic disease viz., bloat, acidosis, milk fever, hypomagnesimia, pregnancy toxaemia etc. However, few common metabolic diseases encountered in herd/ flock management are discussed in the chapter. Among these diseases bloat, acidosis and ketosis are generally occurs due dysfunction in rumen. In the rumen, microbial fermentation occurs due to unique structures and environment. Microbes converts fibrous feeds which are of no use for human beings to important product viz., milk meat, hair and fibre etc. Some bacteria and protozoa have isolated from rumen by the researchers and with their fermented products and pathways. Name of the fermented products with the products is presented in the following Table 24.

Ecology is the inter-relationship between organisms and their environment. Weed ecology is study of inter-relationship between weed and their environmneent. Simply, Ecology of weeds means the inter-relationship of weeds with climate, soil, crops and other biotic factors. Terrestrial weed species persist in the soil by virtue of dormant structures, typically seeds or vegetative perennating organs such as rhizomes, tubers and taproots. In dense infestations, the banks of seeds or underground meristems from which new plants may be recruited into adult populations can be exceptionally large. Rao (1968) estimated that in Cyperus rotundus L. tuber populations of 10 million per hectare were possible, whilst Soerjani (1970) calculated that Imperata cylindrica may annually produce six tones of rhizomes per hectare. Typically seed banks of annual weeds in arable soils contain from 1000-10,000 seeds per m2whilst in grassland the upper limit to this range may extend at least to 1 million per m² (Mortimer 1994).

Abstract

Bio-intensive pest management modules have been developed by the Project Directorate of Biological Control (PDBC) for management of pests on cotton, sugarcane, rice, citrus and several other crops. These modules lay emphasis on release of bio-control agents like parasitoids, predators and pathogens and reducing chemical pesticide applications to the possible extent. The pre-requisite of any bio-control programme is to have a large-scale supply of beneficial agents. It is at this juncture that women can play a major role. If the biocontrol strategy has to become popular, there should be reliable sources, which can assure timely and adequate supply of quality bio-agents for large-scale field releases. It would be most appropriate to educate farm-women on the importance of natural enemies and to provide them with incentives to start bioagent production units. Again, if the concept of biological control with the involvement of women has to succeed, massive educational programmes should be initiated. Women can become active participants at the village level mass production units, which could cater to the needs of farmers of different regions of our country. This could solve the problems encountered in long distance shipment of bio-agents. Besides creating awareness among women, these insectaries/production units can provide job opportunities for the rural and urban women.

Abstract

A survey was conducted in five different villages of Kangra district (HP) namely Padhiarkhar, Lachoon, Avery, Saliana and Patti. Thirty families from each village were selected. A sample of 650 subjects of different age groups was surveyed to assess their food and nutrient intake. It was observed that the food and nutrient intake was less as compared with the Recommended Daily Allowances (RDA). To meet the RDA of the vulnerable section of the society some of the energy rich recipes were prepared under All India Coordinated Research Project in Home Science. The recipes prepared were weaning mix (salty), Weaning mix (sweet), Papad, Shakerpare, Mathri, Pinni, Amaranth ladoo, Methi ladoo and Panjiri. These products were organoleplically acceptable. No fat content was found in the papad but it contained good amount of the vitamin C i.e. 70mg/100g. Maximum fat content was found in the panjiri (39.3g/100g). Protein content ranged between 0.78-5.64g/100g, minimum in panjiri and maximum in weaning mix (salty).

Abstract

The present paper examines the effect of fodder cutting and uprooting activity on the cardiovascular system of farm women. The research design comprised of field study conducted on 30 farm women. The activity of cutting and uprooting were studied with the traditional tools as well as with the improved tools. Newly designed and developed slashing knife and uprooter were provided to the respondents for performing the activity of cutting and uprooting. The results revealed significant reduction in average working heart rate (2.08** - cutting and 4.99** - uprooting; Significant at 5% level) and peak heart rate (-3.55**- cutting and 1.70**- uprooting; Significant at 5% level).  It was found that there was significant reduction in muscular stress after use of improved tools over the existing tools.

Abstract

The present study aims to assess postural and muscular stress among farm women performing weeding and winnowing operations. Postural stress was assessed through postural deviation in spinal curvature, energy expenditure, physical cost of work, cardiac cost of work, pain in different body parts and muscular stress was assessed by percentage decrease in grip strength. Postural deviations were recorded with the help of flexi curve. Heart rate was calculated in 3 phases: before, during and after the work. Energy expenditure, physical cost of work, cardiac cost of work was also calculated. Grip strength of both hands was calculated by grip dynamometer. The mean value of ergonomic parameters were found more in weeding operation which were as follows : -Postural deviation (250), Average heart rate (5.35), energy expenditure (5.70), physical cost of work (3.05), total cardiac cost of work (35.82). After weeding operation farm women perceived very severe pain in lower back, buttocks, and palms, while after winnowing they experienced very severe pain in shoulder, upper back and upper arms.

There appears a general consensus that agriculture sector in India requires to be revitalized to enable it to respond effectively to the multitude of challenges that it now faces, and include assuring food security and environmental sustainability against the background of declining natural resources, changing climate and needs to become increasingly competitive.

Sustainable agricultural practices cover a whole range of improving sustainability: raising soil fertility, improving water storage capacity, increasing water quality, diversification, raising people’s capability to cope with risks and withstand natural calamities, reducing energy consumption, minimizing risk, and so on.

It is impossible to achieve sustainable development without applying sustainable agriculture on a large scale. The relationship between agricultural production and eradication of extreme poverty and hunger is very strong: agriculture is the very basis for food security. Together with fisheries, it provides practically all of the world’s food.

Youth of today are the hopes of tomorrow.  They are the backbone of a country.  Youth reflect the national potentiality and represent the life blood of a nation. The future of the country lies in their hands.  What they will become, what they will do, what role they will play in the free democratic society, will depend, to a greater extent, on the period between childhood and adulthood.  They are the most potent segment of the population of a country. It is they who are to shoulder responsibility for the future development of the country.

The socio-economic development and prosperity of the rural areas depends, to a considerable extent, on the type of the youth the country side has, because the rural youth have abilities to orient themselves to go along the main stream of the development process.  The youth, a bulk of total population of the country, are the national cream and the future crown with full possession of physical built and mental tenacity and power. They are the precious human assets who can play an important role in nation building activities if opportunities are provided.  If a country can harness a creative and pervasive force like youth, it can substantially and quickly advance towards modernization. Youth are the nation builders of tomorrow. They are not only carriers of new ideas and are more receptive to new ideas, ready to bear risk and willing to work as a Team.

Youth constitute a numerically dominant potential, resourceful and adventurous segment of the population in India. The share of population between age group 0-14 years dropped from 43% in 1971 to 41% in 1981, however the share of population age 65 has been fairly stable at 3% since 1971. In 1991, youth population in India with the age group of 15 to 35 years was around 31 per cent (246 millions) of the total population.  Out of this total youth population, 20 per cent (53 millions) were urban youth, while the remaining 80 per cent (211 million) were rural (Shivalingaiah, 1995). According to 2001 census, India had a total youth population of 347 millions (i.e. 35.2 per cent of the total population), out of which, about 70 per cent were rural youth and the remaining 30 per cent were urban youth. Since major segment of this population are being lived in the rural areas, they are considered as the nation builders of tomorrow. This important section of the rural population can respond to the needs of country only if they are offered fruitful opportunities for growing up as useful citizens. Today unemployment is a major problem among the rural youth which forced them to migrate from rural areas to urban areas. Indian villages are, therefore undergoing major transformation causing perceptible changes in aspirations of the rural masses, especially the youth. These aspects have been dealt in greater detail in some papers (Sharma, 2006).

Indian dairy sector has made significant progress over the last few decades. Despite three decades of cooperative movement in India, however, a large proportion of milk and milk products in India continues to be marketed through the ‘informal or unorganized sector’. Although the share of organized market has steadily increased over the last few decades, the informal sector comprising middlemen, private milk traders and direct sale from producer to consumer, still accounts for nearly 80 percent of existing milk marketing pattern in the country. Milk contributes more to the national economy than any other farm commodity more than 10.5 billion dollars in 1994-95 (Dairy India 1997). In the context of poverty and malnutrition, milk has a special role to play for its many nutritional advantages as well as providing supplementary income to some 70 million farmers in over 500,000 remote villages (Dairy India 1997).  In their study, Datta and Ganguly (2002) reported that if the current growth continues for the next twenty years (the nation has been growing at a rate between 5 and 7 percent over past five years), milk consumption is likely to more than double by 2020. So above the discussion drives us to analyse the marketing behaviour of dairy farmers.

The study area, Tamilnadu, was selected purposively and out of seven agro-ecological zones in Tamil Nadu, western region has been selected purposively as it highest share in both the bovine population and milk production in the state. And both organized and unorganized milk marketing system working in this zone with largest number of milk plants.

Involvement of Farm Youth in the developmental sector of Agriculture is emerging as a crucial area for the water management sector. Initiative of Farm Youth is essential for accelerating modern Agricultural technologies to be adopted by the large number of farmers in the rural area. Being an educated, effective use of the information & communication   technology (ICT) is possible. The recent developments in the field of Agriculture like, green-house technology, exporting vegetables and fruits to outside country, formation of agricultural producer’s company etc. are the challenging areas where the Farm Youth can develop a leading role for the farming community.
 
Maharashtra, being a progressive State, encourages Farm -Youth activities in various fields to boost-up the younger generation to participate in the information and communication technology (ICT) areas. As a result of Govt. initiative, in the field of Participatory Irrigation Management, the Water Users Association, namely, ‘Mahatma Phule Water Users Association’ At Post: Ozar (Mig), Taluka: Niphad, Dist: Nasik was successfully run by a Farm Youth namely, Mr. Govardhan Rajabhau Kulkarni who is an idol for the Farm Youths to participate in the irrigation water management field. The use of internet, e-mail, agriculture related web sites and developing software programmes for irrigation management is highly appreciated by the Govt. of Maharashtra.

Agriculture and allied service sector in Karnataka, contributes about one third to the state Gross Domestic Product (GDP).  This sector still continues to be the largest source of employment in the state with about 70% of the population depending on it.  Agriculture plays a key role   in the state’s economy with a net-cropped area of 107.90 lakh ha. of which 23.20 lakh ha. is irrigated and 84.79 lakh ha is rainfed.  In today’s competitive environment, one need to rethink about the sustainability of development, whether it is individual or the area and agriculture or any other field .To develop the rainfed area and the people, the World Bank assisted Sujala Watershed Project is implemented through the Karnataka Watershed Development Department (KWDD).  This has become a boon towards sustainable development of the rainfed area and the people. The first phase of KWDP focuses on poverty alleviation and improvement in agricultural productivity through its multi faceted approach.  That is, the land treatment for improving their agricultural productivity and strengthening Self Help Groups (SHGs) in the selected area to take up viable Income Generating Activities, which paves way for the overall development of the area and the people living there.  The project area covered five districts namely, Kolar, Tumkur, Chitradurga, Haveri and Dharwad in Karnataka state of India.

India is predominately a agriculture based country, wherein 85 per cent of the land holding are small and marginal. The per capita availability of land has been decreased from 0.5 ha in 1950-51 to 0.15 ha by the turn of the century and a projected future decline to less than 0.1 ha by 2020. This decline in trend in size of land holding poses a serious challenge to sustainability and profitability of the farming. The population is steadily growing without any possibility of increase in land area. The income from cropenterprise for an a average farmer is hardly sufficient to sustain his family. But the farmer has assured of a regular income for a reasonable standard of living by including other enterprises. The integrated farming system (IFS) seems to be the solution to continue to increase the demand for food production, stability of income and improvement of nutritional status of family members.
 
Agriculture in this millennium, due to emerging production scenario, higher economic growth, population explosion and shifts in dietary pattern has changed the supply and demand profiles of food respectively. Integrated Farming Systems (IFS) seems to be the possible solution to meet the continuous increase in demand for food, stability of income and diverse requirements of food grains, vegetables, milk, egg, meat etc., thereby improving the nutrition of the small-scale farmers with limited resources.

Youth, as a concept, has been generally defined all over the world as a group of human beings who have reached the end of puberty but have not yet acquired the full rights and duties of adult life ( Friedman: 1971).  Undeniably, the youth constitute a vast reservoir of energy especially in underdeveloped countries including India. Out of the 120 crores population of India, those in the 15 to 30 age group constitute 50 per cent which means that 60 crore young people, men and women, are available for handling various tasks of development, local, regional and national.  Progress of the country depends on the participation and full involvement of all sections of people especially youth. Youth can make their constructive contribution to national development and through which society can benefit from the idealism and sense of dedication of youth. At the same time, they also benefit from their active participation in developmental activities. Since such participation increases their self esteem, give them a sense of identity and of being needed by society.  The human life passes through various stage such as infancy, childhood, adolescence, youth, adult and old. Out of these stages the youth stage is very crucial and dynamic in the life of an individual as from this stage individual starts assuming responsibilities in the life and learns practically the social rules by coming in contact with world outside the family.  Youth is the time of life marked by growth and development. It is the period between childhood and maturity. United Nation has defined youth as those young people within the age group of 15 to 24 years both inclusive. Youth symbolizes zest, idealism, dynamism, enthusiasm and energy.

Amino acids are the building blocks of proteins. They occur in all living plant cells as constituents of proteins and as free acids or amides. More than 200 naturally occurring amino acids have been identified in higher plants. Around 20 different amino acids have been observed to be incorporated into proteins. They have two functional groups, an amino group (-NH2) and a carboxylic group(-COOH). Both these groups are attached to the a carbon atom only. Amino acids with this structure are called a amino acids or 2-aminoacids. The unique characteristics of the 20 amino acids are due to the side chain (R), which can be an alkyl, hydroxyl, thiol, amino, sulphide, aromatic, or heterocyclic group.

Amino acids have the general formula, R-CH(NH₂)-COOH. The R represents a side chain. If R=H, the simplest amino acid glycine (NH₂ -CH₂ –COOH) results. Amino acids are alpha (a ) amino carboxylic acids. The carbon atom is tetrahedral in shape. The various groups attached to it are placed in different positions. Since the valence of the carbon atom is four, four groups can be attached to the carbon atom. Based on the groups attached to the carbon atom it may be of two types.

The importance of lipids have already been elaborated. They play a major role as source of energy and as components of membranes which have implications in plant growth regulation. The complete metabolism of fat leads to oxidation, the final products being CO₂ and water. The burning of one mole of palmitic acid gives 2340 kcal.  The molecular weight of palmitic acid is 256. This works out to approximately 9 kcal/g of palmitic acid. This energy is twice that derived from either sugars or proteins. Fats and oils are thus better and more efficient forms of storage of energy in living beings.

Amino acids serve as the building blocks of proteins and as precursors of many other important biomolecules such as hormones, purines, pyrimidines, porphyrins and some vitamins. They also serve as sources of energy when present in excess amounts and when they are used as fuel, amino acids undergo deamination reactions. The remaining carbon skeleton will either convert itself into glucose or undergoes oxidation to CO₂ via TCA cycle.

Central dogma: The Central dogma of molecular biology, which has been formulated as a simple linear progression of information from DNA to RNA to Protein, is summarized in the illustration. The replication process on the left consists of   passing  information from a parent DNA molecule to daughter molecules. The middle  transcription process copies this information to a mRNA molecule.  Finally, this information is used by the chemical machinery of the ribosome to make polypeptides.

Phenol is normally a benzene ring containing an –OH group, and hence an aromatic alcohol. The term phenolic refers to similar aromatic compounds with one or more -OH groups. Phenolics constitute one of the most widespread classes of secondary metabolites. Commonly talked about class of compounds like anthocyanins, flavonoids, lignins, tannins, coumarins and chalcones are all phenolic substances. Phenolics are water insoluble substances. However, the water solubility increases with the increase in the number of -OH groups. Phenolics absorb electromagnetic radiation strongly. Many of the phenolics absorb in the visible part of the spectrum (Ex. anthocyanins) and are coloured. Phenolics are produced in plants by 1. Shikimate pathway through phenylalanine (C6.C3)  and 2. Acetate/ malonate pathway.

Plant pigments impart colour to the different components like leaves, flowers, fruits etc. They in turn are responsible for the colour of raw food, we eat. Pigments like chlorophyll, anthocyanins, flavonoids, tannins, xanthones etc. are the different pigments that are present in plants. The primary function of pigments in plants is photosynthesis, which uses the green pigment chlorophyll along with several red and yellow pigments that help to capture as much light energy as possible. Other functions of pigments in plants include attracting insects to flowers to encourage pollination.

Sterols are derivatives of a complex ring system called cyclopentano perhydro phenanthrene. The term sterol means solid alcohol. Sterols, though alcohols, are solids with a M.P. of 100-120^ºC. The 27 carbon atoms impart hydrocarbon character, namely, solubility in non-polar solvents. Free sterols in plants are mono hydroxy  secondary alcohols varying in the constitution of methyl or ethyl group and in double bonds. Cholesterol, ergosterol, bile acids, sex harmones, cortical harmones and D-vitamins are some of the sterol derivatives.
   
The most widely distributed sterols in higher plants are the C₂₉ sterols, stigmasterol, β sitosterol and g sitosterol. Together, they are called steroids. In plants, steroids are present as glycosides. Cholesterol was first isolated from gall stones. The word cholesterol means “solid alcohol from bile”. Bile is a fluid which is formed and stored in the gall bladder. It aids in the digestion of fats in the digestive tract. Sterols form an important group among the steroids. Unsaturated steroids with most of the skeleton of cholestane containing a 3β-hydroxyl group and an aliphatic side chain of 8 or more carbon atoms attached to position 17 form the group of sterols.

Alkaloids are naturally occurring substances of plant origin that are alkaline in reaction. They are optically active, contain nitrogen as part of a heterocyclic ring and have varying degrees of psychological responses in man and animals. They exhibit significant pharmacological activity. Alkaloids are mostly basic in character but also includes some related compounds with neutral and even weakly acidic properties. Presently more than 2000 alkaloids are known.

Nomenclature of alkaloids
Alkaloids are named by adding the suffix ‘ine’ to various distinguishable features such as sources, physiological action in animals, their properties etc. Thus, 1. The name of the genera of the plants containing them Ex. Atropine (Atropa), nicotine (Nicotiana) etc. 2. The names of the species of the plants producing them Ex. Cocaine (Erythroxolon coca). 3. The common name of the organism producing them Ex. Ergotamine (ergot fungus). 4. The specific physiological activity observed in animals Ex. Emetine (emetic – causing vomiting), narcotine (narcotic-alters mind).

Before the invention of N fertilizer, mineralization of organic N ( present in dead plants and animals or manure) was the main method used to obtain ammonium and nitrate nitrogen. Mineralization is conducted by soil microbes resulting in ammonium ion. Most Nitrogen is absorbed by plants in the form of Nitrate (NO-₃). Ammonium is converted to Nitrate with the help of  soil bacteria. Nitrogen is a very mobile element and is easily lost from the soil. Ammonium (NH₄+) can be converted to Ammonia (NH₃). The gaseous ammonia can be lost to the atmosphere.  Nitrate can be lost through denitrification. Nitrate nitrogen is reduced to nitrous oxide (N₂O), elemental nitrogen (N₂) and nitric oxide (NO). All are volatile. Denitrification occurs under conditions of high water availability and temperatures higher than 10^ºC.

In the present investigation, nine cyanobacterial species viz. Anabaena variabilis, Anabaena fertilissima, Nostoc muscorum, Nostoc punctiforme, Nostoc linckia, Nostoc commune, Spirulina platensis, Westiellopsis prolifica and Hapalosiphon sp. were tested for their activity pattern against some selected bacterial species.
 
Each cyanobacterial species was initially subjected to determine the early stationary phase of their life-cycle, which is believed to be the most appropriate period for the production of secondary metabolites by an organism. The growth curve for each cyanobacterial species was prepared by culturing them in BG-11 growth medium. Optical densities (OD) recorded at 650 nm were plotted against number of incubation days for each cyanobacterium. After 23-25 days of incubation period, each culture was harvested to obtain the biomass and spent medium, which were then subjected to process of extraction by using various solvents viz., Hexane, ethyl acetate, dichloromethane and methanol. The extracts and spent medium thus obtained were then investigated for antibacterial activity against five pathogenic bacteria including Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pnumoniae and Salmonella typhi.

Abstract
 
The definition of quality is described from a very simpler one “fitness for purpose or use” to a comprehensive “the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs”. The concept of total quality management in food industry is adopted recently and it is the “integrated organization approach in delighting customer (both external and internal) by meeting their expectations on a continuous basis through everyone involved with the organization working on continuous improvement in all products/processes along with proper problem solving methodology”. TQM is concerned with the integration of all the efforts in organization towards quality improvement, quality development and quality maintenance to meet full customer satisfaction at economic levels. TQM enhances the work culture and employee’s satisfaction through participation and involvement and consequently the image of the organization.

Abstract

There are enormous food processing industries comprising of grains and oilseeds milling, fruits and vegetables processing, spice grinding and other food processing units in India. Also, there are many seed processing companies in the country, which are engaged in the processing and production of good quality seeds of different crops besides National Seeds Corporation and State Seed Corporations. All industries are using different type of machinery and equipment like cleaner, grader, expeller, milling machines, polishers, dehusking machines, size reduction equipment, different type of grinders, separators, treatment machinery, mixers, pulverizes etc. Besides this equipment, material-handling equipment like conveyor (belt, chain or screw type), elevators, holding bins and other handling equipment are also frequently used in the processing plants. To meet the above requirement many firms are also involved in the manufacturing of these equipment and machinery. Since, most of the seed processing equipment, dhal milling plants, material handling equipment are manufactured by the unorganized sector and hence equipment and machinery fabricated by them are not of very good quality. However, Bureau of Indian Standards has formulated the codes of manufacturing for these equipment and machinery. Seed processing equipment manufactured in India are generally copy of imported processing equipment. The manufacturers do not use materials of good quality. Framework of the machines is very poor. These machines are not also tested for their efficiency, 

Abstract

Majority of basic research in our country has foundations in Universities and various Institutions linked to them. This paves way for discovering wilder varieties of the present known cereals and other food crops. Such findings help in bioprospecting the required gene/genetic material for the improvement of the existing crops. As per the Biodiversity Act of 2002, it is the responsibility of these institutions to document the same. But, as research scientists are geared to meet the challenges? Being used to socialistic system from the days of Independence where knowledge generated was open to everyone or closed and kept under the mountains of files, the TRIPS agreement has come as a shock. But the true impact of it was realized in 1999-2000, when the patent amendments were taken up. The private institution/ companies went into the act immediately.  We in the University neither were slow to react nor were we prepared to take the shock.  In this paper some of the problems pertaining to IPR and scenario of Indian Universities and Institutions in this regard were highlighted.

Abstract

Pulses being nutritionally vital, is an important constituent of diet for a very large number of peoples. A part from being a relatively cheaper source of dietary protein, it is also an important source of calories, certain essential amino acid, minerals and vitamins. Post harvest scenario of pulse shows that 75 per cent of production was milled in pulses with as dehusked split i.e. dal. Traditionally green gram and black gram dal is dehulled manually after soaking in water. Present investigation was carried out to develop the wet type dehuller and study was carried out on water absorption characteristics of green gram and black gram. The result reveals that the dehulling efficiency of abrasion type mechanism was about 95 per cent and 92 per cent in case of shearing type mechanism. It has been observed that rate of water absorption was initially high and then gradually decreases i.e. 0.54 to 0.18 and 0.48 to 0.18 for black and green gram, respectively. 

Abstract

The control of micronutrient deficiency is a realizable goal, notwithstanding the magnitude of the task, challenges and constraints that need to be resolved. Since wheat products particularly maida and atta form the major raw material in widely consumed food items like chapati, bread and biscuit. Fortification of flour as followed in many other countries could be an important strategy to help realize this goal. The technology of flour fortification is effective and cost affordable. Effective flour fortification program would require collaboration between scientific community, governmental and non-governmental agencies, and industry and consumer groups.

Abstract

30 lines were selected from 864 germplasm lines for good biscuit making attributes on the basis of low protein content (<10.5%) and low sedimentation value (<40cc). These lines were further screened by actual baking test and alkaline water retention capacity (AWRC) test keeping the standard prescribed for biscuit making qualities viz., low protein content, low sedimentation value, low AWRC and larger diameter with larger spread ratio of biscuit. AWRC had significant negative correlation with biscuit spread ratio. Positive significant correlation was found between biscuit spread ratio and biscuit diameter. On the basis of above findings, it may be recommended that low protein content, low sedimentation value, low AWRC may be used as criteria for better biscuit making i.e. increase biscuit spread ratio and biscuit diameter. So wheat-breeding programme has opened up new opportunities for the end use quality product and wheat based food industry. Hence there is an urgent need for qualitative analysis of desired traits in wheat towards enhanced value addition and thereby an attempted has been made to identify suitable genotypes possessing good biscuit making attributes

Abstract

Paddy seeds of variety PR - 116 were obtained from the PAU seed farm. These seeds were cleaned with commonly used seed processing equipment. Samples were divided into 2 parts. One part was kept as such for taking the observations of feed (control) and the remaining part was passed through specific gravity separator for its refinement. The various fractions obtained were recovery, middlings, and rejections. These graded fractions as well as the feed were packed in 5-kg cloth bags and stored under ambient conditions. Different quality parameters viz. moisture content, physical purity, thousand grain weight, percent germination, root/shoot length, vigour index and speed of germination were recorded at 30 days interval. The physical purity, thousand grain weight, percent germination, root length, shoot length and vigour index were found to be higher in recovery and minimum for rejections while moisture content was highest for rejection as compared to all other fractions. Germination, root/ shoot length, vigour index and speed of germination increased with the duration of storage while moisture content, thousand-grain weight and physical purity followed a reversed trend. Compared to feed, the recovery had higher quality attributes after 4 months of storage viz. moisture content decreased by 0.3%; physical purity increased by 0.67%; thousand grain weight increased by 2.97 gm/ thousand grain, germination increased by 8%; vigour index increased by 481.1 points; speed of germination increased by 3.2 seedlings per day. The grading resulted in improvement in overall quality of sunflower seed.

Abstract

Garden peas of two cultivars (Pb-87 and Pb-88) were procured. Pods were shelled manually, grains were blanched and dehydrated. Other lot of peas of both the varieties was allowed to mature on the plant till the plant foliage dried up, harvested, pods were dried in shade for few days, shelled manually and grains were further dried in shade. Grits were prepared by grinding rice and pea (dhal) in a laboratory grinder to pass through 20 mesh sieve. Blends were prepared by mixing rice and pea grits in the ratio of 100:0, 85:15 and 70:30. The blends were subjected to extrusion cooking using Brabender single screw extruder. The extruder die pressure, specific energy consumption (SEC), expansion ratio, density, water absorption index (WAI), water solubility index (WSI) and organoleptic characteristics were studied. Addition of pea grits resulted in a decrease in die pressure in all the blends. Addition of pea grits showed a significant effect on SEC. A decrease in expansion with increase in the level of pea grits in blend was observed. The extrudates having lower expansion showed higher density values and vice versa. Effect of replacement of rice grits with pea grits on WAI was found to be significant. Level of pea grits significantly affected the WSI. Incorporation of pea grits in the rice grits significantly affected the sensory characteristics. Replacement of rice grits with mechanically dried pea grits resulted in deterioration of acceptability score, but addition of field dried pea grits improved the same.

Abstract

Three-point bend test (three point bend ring-HDP/3PB) for five types (Good day, Butter bite, Marie, Krack Jack and Salted) of commercial biscuit brands (Britannia, Supreme, Parle, Lancer, Priya Gold and Dalmia) was developed using TA-XT2, texture analyzer and probable factors affecting the results were assessed. Maximum force to break the biscuits, number of fracture before break, thickness of biscuits and percent break point penetration were found in the range of 1006.5 to 3456.5g, up to 3, 4.2 to 6.3mm and 5.54 to 22.62%. The rupture of biscuits were observed on the basis of probe penetration into the biscuits and found that maximum resistance for penetration offered by Marie whereas minimum by salted biscuits, which was respectively the hard dough and fermented dough biscuit varieties. The analysis of variance for the results revealed that there is significant difference (P£0.01) in the maximum force of break for the biscuit types and brands individually or in combination. Difference in the thickness of biscuits was also found significant among types and commercial brands. The number of fractures was not consistent among the types as well as biscuit brands before reaching the maximum force of breaking the biscuit.

Abstract

There is an urgent need to – create market driven linkages rather than do it alone by building new infrastructure. A lot needs to be done to improve infrastructure in terms of reducing the logistics cost, eliminating middlemen influence and eliminating the wastage of basic inputs. There is a need to blend technologies based on principle of dovetailing production for masses with the advantage of mass production, particularly in the area of grain processing, packaging and marketing which would help combine livelihood, security with agricultural competitiveness. Risk in crop production is not new to any age and the farmers have been bearing it since times immemorial. The farmers should be allowed to maximize their grain. High performance continuous and batch dryers remove moisture in a way that is predictable and reliable. The problems associated with moisture content may be harmful to international trade in grain and need to be addressed adequately by the standardization institutions.

Abstract

A survey of various wheat milling units (atta chakki) available around Indian Agricultural Research Institute, New Delhi was conducted to study the performance of these. The mills of various sizes (12", 16", 18", 20", 24" and 30" stone disc diameter) with horsepower ranging between 2 to 20 are in operation. Both horizontal and vertical disc types of mills are in use. The capacity of these units ranges between 10 kg/h to 200 kg/h. The stationary sieve, hand sieve, pedestal/exhaust fan are used for cleaning. The average wheat cleaning cost is Rs. 200 per ton. A small room of 8' x 10', 10' x 10' and 10' x 12' size is used for running the mills and storage of wheat grains. The grinding charges (Rs./q) of wheat, coarse grains (maize, sorghum, millet etc) and spices are 100, 200 and 1000, respectively. Sample of 500 g of wheat and flour were collected from each chakki and were analysed for wheat grain and flour quality. Infested, damaged grains were observed to be in 2-10% range. Sieve analysis of the flour was done and the average particle size, fineness modulus and uniformity index of the flour were calculated. Average particle size, fineness modulus and uniformity index were found in the range 0.1875 to 0.2023 mm, 1.052 to 1.297 and 0:1:9, respectively. Average particle size of the flour obtained from horizontal mills was found to be higher than vertical mills. Temperature of the flour at the outlet was observed in between 45 and 50°C at room temperature of 18.5°C.

Rabbit domestication dates back no farther than the previous millennium. It were the Phoenicians who are said to have discovered the wild rabbit Oryctolagus cuniculus of Southern Europe and North Africa when they reached the shores of Spain about 1000 B.C. In Roman times, the rabbit was still emblematic of Spain. The Roman spread the rabbit throughout the empire as a game animal. Like the Spaniards, the Romans also ate foetuses or new born rabbits, which they called laurices. It then becomes a practice that the rabbits were kept in leporarian, stone –walled pens or parks for hunting purposes. These leporaria ultimately paved the way for the development of game parks in the middle Ages. The monks ate laurices during lent because they were an aquatic dish. In France, only the lord of the manor could maintain a warren.

Brief History

Fondness of man for rabbits is well established by its appearance in the Aesop’s fables and Vishnu Sharma’s ‘Panchtantra, both of which date back to 2nd century B.C. However, domestic rabbits are descendents of wild species of Western Europe and North Western Africa where Oryctolagus still exists. Interestingly, it was the Romans who first raised rabbits in leporaria (enclosed warrens) as a game animal. Like Spaniards, Romans also ate fetuses of newborn young ones whom they called laurices. These leporaria ultimately paved the way for development of game parks in the Middle Ages. The monks ate laurices during Lent because they were an aquatic dish.

Health care is an important way of making sure that rabbits stay productive. Every rabbit keeper should know how to recognize and, if possible, prevent and cure illnesses which can affect rabbits.

It is always better to prevent disease incidence than to let animals get ill and then try to treat them. Allowing rabbits to get sick is expensive for several reasons, sick animals stops growing and reproducing so money is lost with this decrease in production, some disease results in the death of rabbits, replacing the dead rabbits is expensive , treatment for the ill rabbits is usually expensive.

Medicinal and aromatic plants have been known for millennia and are rich source of therapeutic and cosmetic agents for the prevention of health diseases and critical skin ailments. India is the rich source for the medicinal and aromatic plants and export many plant parts for the research work to the many countries as raw materials. The major market in the world for essential oils is the United States, followed by Japan and Europe. However, production continues to be concentrated in Europe, with seven of the world’s largest essential oil processing firms. In the United States, the major users of essential oils are the soft drink companies. Japan accounts for 10 % of the world demand. The Canadian market is domi­nated by the United States perfume and flavouring industry. France is dominating the world perfumery market, and Switzerland is one of the leaders in the pharma-ceutical field. Britain and India are known to feature strongly in the flavouring sector. The essential oil industry is characterised by a number of difficulties, including lack of stable quality, inconsistent supplies, and variability of active ingredients owing to environmental effects. Even though according to World Health Organization, herbal medicines are lucrative globally and represent a steady high market value in every year.

Introduction

Indiscriminate use of acaricides not only causes the development of resistance in phytophagous mites but are also harmful to their natural enemies, therefore, poses a serious problem of pest resurgence. Hence, worldwide attention has been focused to utilize the natural biocontrol agents and minimize the use of chemical pesticides for the control of mite pests in agriculture with a view to develop a suitable IPM strategy. Among natural enemies of phytophagous mites, predatory mites have been found to be most effective and efficient tool in IPM programme because of the fact that many of these are not only abundantly available in nature but are also voracious feeders and have proven ability to suppress the pest mite population below economic injury level. Beside this, predatory mite can locate, run and catch hold of the pest mites even the pest mite is hiding in rolled leaves, under webs or even in the galls or erinium, etc. Some of the predatory mites require very low population of pest mites as prey, for their survival and multiplication, which is an added advantage for potential predation. Some predatory mites such as Typhlodromus pyri have good synchronization with the prey mite, Panonychus ulmi as, both hibernate and remain active in orchards.

Percent Solutions

There are three types of percent solutions. All are parts of solute per 100 total parts of solution. Based on the following definitions you may calculate the concentration of a solution or calculate how to make up a specific concentration

    1.    % W/W - Percent of weight of solute in the total weight of the solution. Percent here is the number of grams of solute in 100 grams of solution. 
        Example: 
        A 100% (W/W) NaCl solution is made by weighing 100 g NaCl and dissolving in 100 g of solution

    2.    % W/V - Percent of weight of solution in the total volume of solution. Percent here is the number of grams of solute in 100 ml of solution. This is probably the least significant way of naming a solution, but the most common way of doing it. In fact, any percent solution not stipulated as W/W, W/V, or V/V is assumed to be % W/V. 
        Example : A 4% (W/V) NaCl solution is 4 g of NaCl in 100 ml of solution.

    3.    % V/V - Percent of volume of solute in the total volume of solution %V/V. Percent here is the number of milliliters of solute in 100 ml of solution. 
        Example: A 10% (V/V) ethanol solution is 10 ml of ethanol in 100 ml of solution; unless otherwise stated, water is the solvent. 

    1.    The heifer is bred (naturally or by insemination) before the age of two years.

    2.    The gestation period is nine months and one week.

    3.    After calving, the cow gives milk for 10 months.

    4.    1 – 2 months after calving the cow will again be bred.

    5.    The cow then continues to give milk for about 300 days. This period is known as lactation.

    6.    Milk should preferably be handled in a closed system, to minimise the risk of contamination. It must be cooled to 4 °C as soon as it is produced.

    7.    The content of protein, lactose and ash is somewhat higher in buffalo milk than in cow milk. Buffalo milk contains vitamin A, but lacks b-carotene, which is present in cow’s milk.

    8.    When milk and cream turn to butter, there is a phase inversion from an oil-in-water emulsion to a water-in-oil emulsion.

    9.    In milk, the whey proteins are in colloidal solution and the casein in colloidal suspension.

Instructions for establishment registration and processing, filing for acidified and low-acid canned foods

Acid Food
 
A food that has a natural pH of 4.6 or below.
 
Acidified Food
 
A low-acid food to which acid(s) or acid food(s) are added and which has a finished equilibrium pH of 4.6 or below and a water activity (aw) greater than 0.85.
 
Authorized Company Representative
 
The person authorized by the company to sign the registration and process filing forms on its behalf. That person should possess the knowledge necessary to answer technical questions concerning filed processes.

Food and Industrial Microbiology

    1.    Microbiology often has been defined as the study of organisms and agents too small to be seen clearly by the unaided eye—that is, the study of microorganisms

    2.    Two bacteria that are visible without a microscope, Thiomargarita and Epulopiscium.

    3.    Procaryotic cells [Greek pro, before, and karyon, nut or kernel; organism with a primordial nucleus] have a much simpler morphology than eucaryotic cells and lack a true membrane-delimited nucleus. All bacteria are procaryotic.

    4.    Eukaryotic cells [Greek eu, true, and karyon, nut or kernel] have a membrane- enclosed nucleus; they are more complex morphologically and are usually larger than procaryotes. Algae, fungi, protozoa, higher plants, and animals are eucaryotic.

    5.    The ordinary microscope is called a bright-field microscope because it forms a dark image against a brighter background

A.    Answer the following.

Q.1.     What are the cytokines involved in innate immunity ?
Ans.     IL-1, IL-12, IL-6, IFN-a, IFN-b and TNF- a.

Q.2.     What are the cytokines involved in adaptive immunity?
Ans.    IL-2, IL-4, IL-5, IFN-g and transforming growth factor – b (TGF- b).

Q.3.     How does superantigen differ from conventional 
antigen?
Ans.     Superantigens bind to class II MHC molecules outside of the normal peptide binding cleft. Unlike normal antigens, they are not internalized and processed by antigen presenting cells but binds directly to class II molecules. A particular superantigen can activate 5-25% 

A. Answer the following.

Q.1.     How many types of polio virus are there ?
Ans.    There are 3 serotypes of polio virus namely polio virus type 1, 2 and 3.

Q.2.     Who first developed inactivated polio vaccine ?
Ans.    Jonas Salk.

Q.3.     Who first developed attenuated oral polio vaccine ?
Ans.     Sabin.

Q.4.     What are the different inactivating agents used to inactivate viruses in preparing vaccines ?
Ans.    Formaldehyde, b-propiolactone and ethylenimines.

Introduction
 
Agricultural activity in the arid and semi-arid divided into two main components are plant production and animal production. Animal production is associated with a component of a large proportion of workers in the agricultural sector, either individually or as part of agricultural activity Integrative. The livestock are plays major role in the lives of the rural population to the availability of several important products such as meat and dairy products.

Farm animals in the arid and semi-arid depend on their feeding mainly on crop residues and natural pastures that do not meet their needs due to scarcity of resources in these regions. Such scarcity is caused by a number of factors; the most important factor is limited agricultural land devoted to cultivation of fodder crops, low rainfall and the deterioration of natural pastures. However, there are many studies in different countries suggesting the possibility of widespread exploitation of cactus as a strategic resource, especially in the areas of low rainfall and scarce feed resources (FAO 2007). Those studies recommend the use Cactus to feed cows, goats, sheep and rabbits without causing any problems to the animals’ health. In addition, it can be used as medicine and cosmetics for humans and for many other uses.

Several centuries ago, Father of medicine Hippocrates, has said “Let food be your medicine”. Our traditional therapies or alternative medicine effectively integrated this concept and include herbal remedies, nutritional interventions like vitamins/minerals supplementation specialized diets etc, and other techniques such as acupuncture, relaxation regimens, and homeopathic medicines. While, in modern medical science medicines are used to cure diseases which may have some inherited side effects. From the final decade of the last century, a renewed interest was seen in traditional therapies and people are thinking of integrated medicine with a focus on prevention of disease rather than its cure. In this context many terms like “dietary supplements”, “nutraceuticals” and “functional foods” were frequently used to address this issue. The term “nutraceutical” was coined from “nutrition” and “pharmaceutical” in 1989 by Stephen DeFelice, MD, founder and chairman of the Foundation for Innovation in Medicine (FIM). Nutraceutical can be defined as, “a food or part of a food, that provides health benefits, including the prevention and treatment of a disease.” However, the term nutraceutical as commonly used in marketing has no regulatory definition. There is confusion between the closely related terms nutraceuticals, functional food and dietary supplement. Kalra (2003) differentiated between these terms as: Functional food provides the body with the required amount of vitamins, fats, proteins, carbohydrates, etc, needed for its healthy survival. When functional food aids in the prevention and treatment of disease(s) and disorder(s) other than anemia, it is called a nutraceutical.

Introduction

The present world wide situation of food items calls for a broad range of poultry alternatives to meet increasing demand of quality protein. Besides, complication involved in managing chicken, emergence of new diseases, increase in feed cost and increasing demand of poultry meat bound us to search for alternative species of poultry. In this circumstance rearing of Guinea fowl framed for centuries to meet poultry production requirements of diversified agricultural milieu. The traditionally reared Guinea fowl could become a significant source of food and also a source for substantial supplement income.

History
 
Guinea fowl a bird of West African origin came to India during mediaeval age. Now guinea fowl are being raised in the districts of eastern Uttar Pradesh and in some parts of Tamilnadu. The birds are very popular with marginal farmers and poor classes and are being largely kept as foragers and insectivorous under semi-range and range conditions.