eChapters

1. SEED INDUSTRY BEFORE INDEPENDENCE

The Royal Commission on Agriculture (RCA) constituted in 1925 suggested the following for seed improvement

There should be a separate organization within agriculture departments to deal with seed distribution and seed testing.

The seed distribution enterprise should be self-sustaining.

Seed distribution should be organized through co-operatives, other associations, seed merchants (whenever they are available), through seed agents, as well as through agricultural department staff and any other agency which could be considered suitable.

Seed merchants of proven enterprise should be given every encouragement.

1. DEFINITION

Seed marketing is the one of the most vital components of seed technology. On it depends the size and scope of the seed industry. Broadly it includes such activities as production, processing, storage, quality control and marketing of seeds.

Seed marketing refers to the actual acquisition and selling of packed seeds, intermediate storage, delivery and sales promotional activities.

Rural Development : Concept and Meaning

Mahatma Gandhi said, “India lives in its villages. If the village perishes, India will perish too”. This saying about the social, economic and political development of rural areas justifies that India is predominantly an agrarian country with more than 70 percent of its population living in more than five lakh villages. Agriculture is the predominant livelihood occupation and the rural population largely consists of small and marginal farmers, agricultural labourers, artisans and scheduled castes and scheduled tribes. A large part of this rural population is still living below the poverty line and is the focus of rural development programmes. Rural Development is not a new concept for India rather it is a very basic principle of our culture. The famous epics like Ramayana and Mahabharata teach us the dignity of humanity and benevolence and justice to people. In ancient days, our villages were self-sufficient and requiring very little assistance from outsiders. However, during British rule, the rural economy was destroyed and the rural mass was made dependent on goods and services provided by outsiders. There was no rural development policy as such to make the people self-reliant. Some of the rural development activities were taken up by the British Government in India during the Great Bengal Famine. These attempts were of very limited scale without having legal sanctions behind the move.

1.1. Definition

Soil: Thin layer of earth’s crust made up of disintegrated and decomposed rocks, complex mineral compound, organic matter, water/air and living organism like bacteria, fungi, insects and worms and serves as the natural medium of growth of plants.

Provides nutrients, moisture, anchorage (support) and air to plants.

Parent materials are igneous rocks, sedimentary rocks and metamorphic rocks.

Soil Science: Science dealing with soil (Natural resource) on the surface of the earth, including pedology (Soil genesis, classification and mapping), physical, chemical, biological and fertility properties and their relation to management for crop production.

Any material of natural or synthetic origin added to the soil to supply one or more plant nutrients.

10.1. Classification of fertilizers

10.1.1. Straight fertilizers

Supply only one primary plant nutrient, namely nitrogen or phosphorus or potassium.

Eg. Urea, ammonium sulphate, potassium chloride and potassium sulphate.

1.1. Dry farming (Dryland farming)

Cultivation of crops in a region where the annual rainfall is more than 750 mm.

Semi arid crops with growing period of 75-120 days.

Crop failure is less frequent.

Moisture conservation practices are necessary.

Vermicomposting is the process of turning organic debris into worm castings by earthworms.

Earthworms feed on decaying material, pass through alimentary canals and excreted as castings.

pH of the castings is 7 (neutral) and the castings are odourless.

Contain high amounts of nitrogen, potassium, phosphorus, calcium, and magnesium.

Contains 5 times the available nitrogen, 7 times the available potash, and 1 ½ times more calcium and rich in humus.

Improves aeration, porosity, structure, drainage, and moisture holding capacity.

Preparations containing living cells or latent cells of efficient strains of microorganisms that help crop plants to uptake of nutrients by their interactions in the rhizosphere when applied through seed or soil.

Accelerates microbial processes in the soil.

1.1. Sericulture

Refer to rearing of silkworms for the production of raw silk.

Major activities are mulberry cultivation, silkworms spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits.

Bombyx mori is the most widely used. Silk-fiber is a protein produced from the silk-glands (modified labial glands) of silkworms.

2.1. Breeds of poultry

9.1. Molecular breeding and marker assisted selection

Using conventional breeding, developing new varieties takes atleast 15-20 years.

Molecular breeding shortened the time to 7-10 years.

One of the tools for faster variety development is Marker Assisted Selection (MAS).

MAS-refers to use of DNA markers to assist phenotypic screening.

Plants that possess particular genes or quantitative trait loci (QTL) may be identified based on their genotype rather than their phenotype.

13.1. Germplasm

Also known as genetic resources or gene pool or genetic stock.

Sum total of hereditary material i.e. all the allele of various genes, present in a crop species and its wild relatives

2.1. Causes of pest outbreak

Activity of human beings which upsets biotic balance of ecosystem is prime cause for pest outbreak.

4.1. Black gram, green gram, lablab and cowpea

4.1.1. Bean aphid: Aphis craccivora (Aphididae: Hemiptera)

1. Host range: Groundnut, redgram, peas, beans, safflower, lablab, niger

6.1. Cotton

6.1.1. Leafhopper: Amrasca devastans (Cicadellidae: Hemiptera)

7.1. Early shoot borer: Chiloinfuscatellus snellen

1. Damage symptoms

10.1. Classification of pesticides

10.1.1. Based on organisms

1.1. Definition

Alteration in one or more of physiological processes culminating in a loss of coordination of energy utilization in a plant as a result of the continuous irritation due to presence or absence of some factor or agent.

A plant is said to be diseased when there is a harmful deviation from normal functioning of physiological process (Federation of British Plant Pathologists, 1973).

4.1. Agricultural production economics

An applied science, wherein principles of choice are applied to use of land, labour, capital and management in farming.

Explains conditions under which profit and output can be maximized and cost and use of physical inputs can be minimized.

1.1. Credit

Defined as a device for facilitating temporary transfer of purchasing power from those who have surpluses of it to those who are in need of it.

8.1. Kisan Credit Card (KCC)

Credit scheme introduced in August 1998 by Indian Banks.

Prepared by NABARD on recommendations of R.V.Gupta committee to provide term loans and agricultural needs.

KCC holders are covered under personal accident insurance up to Rs.50,000 for death and permanent disability and up to Rs.25,000 for other risk.

Premium is borne by both bank and borrower in a 2:1 ratio.

Validity period is five years with an option to extend for up to three more years.

2.1. Market structure

Refers to those organizational characteristics of a market which influence nature of competition and pricing, and affect the conduct of business firms.

Those characteristics of market which affect the traders behavior and their performances.

Formal organization of functional activity of a marketing institution.

A knowledge of structure is essential to identify imperfections in performance of a market.

8.1. Warehousing

8.1.1. Definitions

Defined as the assumption of responsibility for storage of goods.

Protector of national wealth, for the produce stored in warehouses is preserved and protected against rodents, insects and pests and against the ill effect of moisture and dampness.

10.1. Co-operative marketing

Private agencies dominate Indian food grains trade.

High marketing charges and prevalence of malpractices.

Progress of regulated markets is not uniform in all areas.

Need for strengthening co-operative organization in marketing of farmers produce and supply inputs at right price and time.

Instrumental methods of chemical analysis are the quantitative methods of analysis that use, as principal measuring devices, instruments other than those employed in conventional gravimetric and volumetric determinations.

The main basis for this method of analysis is the physical property of any particular element or compound being analyzed. These properties include:

Hazard Analysis Critical Control Points (HACCP) is an internationally recognized method of identifying and managing food safety related risk and, when central to an active food safety program, can provide customers, the public and regulatory agencies assurance that a food safety program is well managed. HACCP is a management system in which food safety is addressed through the analysis and control of biological, chemical, and physical hazards from raw material production, procurement and handling, to manufacturing, distribution and consumption of the finished product. (FAO, 2003)

Mycotoxin hazard analysis and identification of possible control measures

I. Hazard Analysis

a) Identification of mycotoxin hazard

For a given commodity system in a particular location, the HACCP team need to first consider which, if any, of the mycotoxins known to constitute a food safety hazard are likely to be present. Over 300 mycotoxins are known, but only a relatively few of these are widely accepted as presenting a significant food or animal feed safety risk.

The following mycotoxins have regulatory limits set by one or more countries: the aflatoxins (including aflatoxin M₁), ochratoxin A, zearalenone, patulin, ergot alkaloids, and deoxynivalenol. Guideline limits exist for fumonisin B₁ and regulatory limits are likely to be set in the near future. The regulatory limits are taken as the target levels and should be included in the Product Description table. Mycotoxin limits can also be set by the customer in specific contracts and it is possible that these may include mycotoxins not subject to regulatory limits.

Abstract

Agriculture provides food, feed, fiber and many other desired products for survival of human beings in the world. Modern agriculture emphasizes on use of hybrid seeds, high yielding varieties and chemical fertilizer to increase the crop productivity within a short period. Indiscriminate use of synthetic fertilizers has led to environmental pollution and deterioration of soil health, which results in depletion of essential plant nutrients and organic matter in soil. On account of the environmental hazard and soil infertility, biofertilizer concept was developed. Biofertilizer are natural fertilizers including bacteria, fungi and algae alone or in combination that augment availability of nutrients to the plants. However, due to its short shelf life period it may not be a suitable candidate for modern agriculture. Thus, it is the need of the hour to develop an economic and eco-friendly nano-biofertilizer for sustainable agriculture.

The basic principles of biological control of pests and diseases remain the same, whether applied to insect pests, nematodes or plant pathogens. In the recent years, there is a paradigm shift towards studying antibiosis and its application in biological suppression of pathogens, yet the classical bio-control will remain as relevant as ever. The following discussion is based on recapitulating the basic principles of classical biological control as applicable to plant parasitic nematodes.

Biological control agents (BCAs) have been exploited for pest control in different ways. One way is to manipulate the naturally occurring BCAs by augmenting their populations to pest suppressive levels. In this approach no BCAs are introduced, but various means such as agronomic practices, introduction of organic matter etc. are adopted to favour the build-up of BCAs. The second way is the introduction of BCAs, either as inoculative or inundative release. In the former case, the BCAs are introduced in small quantities and allowed to build-up gradually in due course of time. However, in the latter approach, BCAs are introduced in large quantities so that quick pest suppression can be achieved. Each method has its own merits and demerits (Table 1).

Introduction

Plant parasitic nematodes are important pests, causing major damage to the world’s food and fibre crops. The management of nematodes is more difficult than that of other pests because nematodes mostly inhabit the soil and usually attack the underground parts of the plants. Nematodes in soil are subject to infections by bacteria and fungi. This creates the possibility of using soil microorganisms to control plant-parasitic nematodes. Biocontrol of nematodes was first studied by Duddington (1951). The development of biological control agents is also considered an effective alternative for nematode control on vegetables (Van Gundy, 1985; Kerry, 1987). There are more than 200 species of nematophagous fungi described. Based on the infection mechanism, they are commonly subdivided into three main groups: the nematode-trapping fungi that captures free living nematodes using specialized morphological structures (i.e., traps), the endoparasitic fungi that infects nematodes using adhesive spores, and the egg- and cyst-parasitic fungi that infect these stages with their hyphal tips (Barron, 1977). The nematophagous fungi that have received most attention for biological control of plant-parasitic nematodes include various species of the nematode-trapping fungi Arthrobotrys spp. (Stirling and Smith, 1998), and the egg-parasitic fungi Pochonia chlamydosporium (Kerry, 2001) and Paecilomyces lilacinus (Gaspard et al., 1990).

Introduction

Agricultural production in India is constrained by number of biotic and abiotic factors. India is a tropical country and has a climate which is conducive for insect pests which are, one of the major constraints in agricultural production, processing and storage. Annual crop losses due to insect pests and diseases in India are estimated to be 18 percent of the agricultural output. Insect pests are widespread in all the agroclimatic zones and large quantities of insecticides are used to control these pests. Indiscriminate use of insecticides, lack of adequate knowledge on proper application techniques and dosages, and frequent use of broad spectrum insecticides are common in India. There is a need to identify suitable alternative methods for the management of insect pests and among them, biological control using viruses, bacteria, fungi and entomopathogenic nematodes is gaining greater attention world over.

Nematode families of Steinernematidae and Heterorhabditidae attracted most attention as they contain the entomopathogenic nematodes (EPN). Entomopathogenic nematodes are obligate parasites of insects that kill their hosts with the aid of bacteria (Xenorhabdus and Photorhabdus) carried in the nematode’s alimentary canal. The lethal obligate insect parasites are ubiquitously distributed without pathogenicity to mammals and beneficial non-target insects, and exempted from registration requirements. Currently there are about 98 valid EPN species belonging to Steinernema (79) and Heterorhabditis (19). Soil surveys conducted in divergent areas of Indian subcontinent have demonstrated high diversity of EPN across seasons, habitats, and geographic regions. There are several target pests in India that can be controlled with entomopathogenic nematodes and several workers have used EPN against cutworms, stem borer, white grubs, etc. under laboratory and field conditions and are compatible with existing IPM programmes.

Entomopathogenic nematodes (EPN) in the family Steinernematidae and Heterorhabditidae have enormous potential to control insect pests of economic importance. Since, chemical pesticides pose environmental hazards, these nematodes have received considerable attention as potential bio-insecticides because of their wide host spectrum, active host seeking, killing the host within 48 h, easy mass production, storage and application and are environmentally safe. One of the important criteria for a successful biocontrol agent is formulation of nematodes into a stable product, which has played a significant role in commercialization of these biological control agents. Apart from formulation field application and desired control of insect pests decides the success of EPN.

Formulation of Entomopathogenic Nematodes

EPNs have been known since 1929 but they became commercially available only during 1990s.The first attempts at formulating EPN were initiated in 1979 but the shelf life was very limited (one month). Infective juveniles carried on moist substrates such as sponge, vermiculite and peat require continuous refrigeration to maintain their viability. While formulating nematodes, two things are necessary, a long shelf-life and easy application method. The simplest method is impregnating a moist substrate (such as sponge, peat, vermiculite, etc.) with nematodes. The sponge needs to be squeezed in water before application, to release the nematodes, whereas nematodes from other carriers could be applied directly to the soil. However, these formulations are labour-intensive, require continuous refrigeration and lack economy of scale and therefore can be used on small scale only.

Although the infective juveniles of entomopathogenic nematodes can be stored for several months in water in refrigerated bubbled tank, high cost and difficulties of maintaining quality preclude the deployment of this method. Therefore, nematodes are usually formulated into solid or semi-liquid substrates soon after they are produced.

As the ornamental fish industry expands throughout the world, genetic considerations have become more important in terms of production, sustainability and conservation. Genetic technologies are now being applied to increase food production in aquaculture through traditional and modern breeding programmes. Genetic markers can help to manage capture fisheries and distinguish farmed from wild stocks in mixed fisheries. Genetic technologies are also now finding application in post-harvest and trade to assist in product identification and traceability. Genetic improvement of fish has considerably increased the fish production from aquaculture. It includes selective breeding, hybridization, polyploidy, gene and nuclear engineering. For any genetic selection programme, induced breeding is the basic and initial step. Intensive selective breeding is practiced with various species of fish in perfecting appearance, shape and color so that new strains are produced.

Domestication

Most of the fish being widely grown in captivity are domesticated to some extent, but there are very few which have undergone genetic improvement. Just as terrestrial livestock and crops are bred to be not only productive, but productive in convenient proximity to humans, aquatic plants and animals are now undergoing these same pressures.

In comparison to agriculture crops, fruit plants and animals, aquaculture is much behind with regard to the domestication of the fish, especially ornamental fish. Never the less, a good number of ornamental fish have been domesticated which can be considered for selective breeding to improve their traits. The available technologies and tools could be used to remarkably speed up domestication and genetic improvement process.

Domestication implies much more than merely keeping wild animals in farms or homes. Domestication is a very long process, during which captive individuals become more adapted to captive environments. Domestication leads to permanent genetic modifications of a bred lin-eage, while taming or keeping wild fish in captive conditions is only conditioned behavioral modification of individuals. The entire life cycle of the domesticated fish species must be fully closed in captivity. Once full life cycle is completed in captivity, the process of domestication can proceed further.

The first truly domesticated fish species was certainly the goldfish, for which the domestication was initiated by the Chinese about 1500-2000 years ago.

Rock

A rock may be defined as “an aggregate of one or more minerals”. An aggregate of single mineral calcite gives rise to crystalline limestone. Granite is a combination of several minerals. Most rocks are hard and compact as granite and basalt, but some are loose and feebly aggregated as sandstone. Rocks possess certain characteristics such as structure, colour, specific gravity, cleavage and mineralogical make-up by which we can identify the rocks and also distinguish one from the other.

Rocks and minerals formed under a very high temperature and pressure, when exposed to atmospheric conditions of low pressure and low temperature, they become unstable and weather. Soils are formed from rocks through the intermediate stage of formation of regolith (parent material) which is the resultant of weathering.

Physical properties of a soil greatly influence plant growth. The plant support, root penetration, drainage, aeration, retention of moisture and availability of plant nutrients are all linked with the physical condition ofthe soil. The physical properties of a soil which depend on the amount, size, shape, arrangement and mineral composition of its particles, also influence its chemical and biological behaviour.

Soil Structure Defined

Soil structure is defined as the arrangement of individual soil particles with respect to each other into a pattern. Structure describes the gross, over-all arrangement ofthe soil solids. In other words, soil structure is the ‘architecture’ of a soil.

Soils are composed of structural units, called “peds”. The peds consist of many individual particles, bound together by cementing agents like organic matter, clay and hydrous oxides of iron and aluminium. However, the strength of the bonds, the size and shape of the peds and the proportion of the soil particles involved in the peds differ considerably among soils.

Soil Consistence Defined

Soil consistence is the strength with which soil materials are held together or the resistance of soils to deformation and rupture. Soil consistence is measured for wet, moist and dry soil samples. For wet soils, it is expressed in terms of both stickiness and plasticity. Stickiness is the ability of soil materials to adhere to other objects. Plasticity is the ability of the soil materials to change shape continuously under a constant pressure and to retain the impressed shape when the pressure is removed. Soil consistence may be estimated in the field using simple tests or may be measured more accurately in the laboratory.

Water is the elixir of life. It is required for the evapo-transpiration of growing plants. Water acts as a solvent and, together with dissolved nutrients, makes up soil solution from which plant roots derive nutrients. Soil water content controls soil air and soil temperature.

16.1. Forces of Water Retention

The forces responsible for water retention in soils are adhesion and cohesion. Adhesion refers to the attraction of solid surfaces for water. Cohesion refers to the attraction of water molecules for each other.

The force with which the soil particles retain water is defined in terms of pF scale (Schofield, 1935). pF is defined as “the logarithm to the base 10 of the numerical value of the negative pressure of soil moisture expressed in centimetres of water.”

Plant growth regulators are defined as chemicals other than nutrients and vitamins which regulate (or) modify the physiological process ofthe plant. A plant hormones or phytohormones are chemical substances which are naturally produced by plant in specific organs and are translocated from site of synthesis to the site of action. They bring about specific physiological response, even in very low concentration. The quantity of synthesis of these hormones differ from plant to plant, plant internal and external factors. They are readily absorbed and these chemicals move rapidly through the tissues when applied to different parts of the plant. A plant growth hormone may be termed as a plant growth regulator, but not vice - versa, since other than natural plant hormones, plant growth regulators are synthetically manufactured chemicals.

Plant growth regulators have a diverse chemical composition. Based on the general response the chemical mediates in the plant system, they are classified as growthpromoters and growth inhibitors/retardants. However, a particular growth regulator may be growth promoter at a lower concentration and growth inhibitor at higher concentration.

Ker (Capparis decidua (Forsk.) Edgew, (synonym Capparis aphylla, Roth) is a multipurpose, perennial, woody shrub or small tree found growing naturally in hot arid regions and semi-arid subtropics in various parts of the world. In India, it is known by different names in different parts of the country. In Rajasthan, it is generally called Kair or Ker while in Haryana it is known as Teent or Dela. Some more synonym by which ker is known are Caper, Karyal, Hanbag, Cari, Karira etc while in English, it is known as Caper berry. This species is an important constituent of arid ecosystem and plays significant roles in sustaining the ecosystem. The peoples of Indian Thar desert have known the importance of this shrub for long back. On account of its acquired xerophytic adaptive characteristics, it is capable of growing in various kinds of habitats including wastelands. It is also suitable for stabilizing sand dunes and controlling soil erosion by wind and water. Due to its xerophytic adaptive nature, the plant grows successfully under harsh climatic conditions of arid regions. Berry-shaped unripe fruits are rich in carbohydrates, proteins and minerals. It was abundant about five decades back, but, with increase in populations of humans and livestock and more demand of land for agricultural purpose, it has been over-exploited and eliminated by tractor ploughing and excessive browsing pressure from livestock. This has resulted in significant reduction in plant population of ker, but people still try to retain some plants on farm boundaries as this also prevent soil erosion which is quite high due to wind.

Almond (Prunus dulcis, syn. Prunus amygdalus Batsch.) is an important temperate fruit crop. In India, it is mostly cultivated in Jammu and Kashmir and Himachal Pradesh. Almond is a small deciduous tree, growing to 3–10 m tall, with a trunk up to 30 cm diameter. The young shoots are green at first, becoming purplish where exposed to sunlight, then grey in their second year. The leaves are lanceolate, 4–13 cm long and 1.2–4 cm broad, with a serrated margin and a 2.5cm petiole. The flowers are white or pale pink, 3–5 cm diameter with five petals, produced singly or in pairs before the leaves in early spring. The fruit is a drupe 3.5–6 cm long, with a downy outer coat. The outer covering or exocarp, fleshy in other members of Prunus such as the plum and cherry, is reduced to a leathery grey-green coat called the hull, which contains inside a hard shell the edible kernel, commonly called a nut in culinary terms. Generally, one kernel is present, but occasionally two. However, in botanical terms, an almond is not a true nut. In botanical parlance, the reticulated hard stony shell is called an endocarp. It is mature in the autumn, 7–8 months after flowering. The fruit of the wild forms contains the glycoside amygdalin, “which becomes transformed into deadly prussic acid (hydrogen cyanide) after crushing, chewing, or any other injury to the seed”. However, domesticated almonds are not toxic.(FAO, 2013 and Verma, 2014).

Weed control in agriculture disturbs the farming. Weed management and control essentially increase productivity of the farm. Autonomous robots for weed control systems are gaining a lot of attention. Adaptability of effective weed control robots has the potential to bring evolution in the areas of weed species, genetics and climate conditions. Weed control is one of the major challenges in agriculture. Removal of weeds from farming land required a lot of human effort. To minimize the weed growth pesticides and chemicals are used which is very harmful. In order to make this process easy and reliable robots are used nowadays. Robots are specially designed to detect the weeds and remove them within a stipulated time period. Robots are programmed using various algorithms to do this task in an efficient way without human efforts. This chapter illustrates the use of modern robots in weed control to help the farmers to gain maximum profit and healthy concerns without using chemicals to do so.

10.1 Introduction

Over the time, weed control in a farming land has been an issue. Evolution in technologies in the area of agriculture brought a lot of innovations. Among these robots are one of the innovations to be implemented in agriculture to enhance profitability and reliability with minimum human resource. The robots are deployed to monitor the farming land from weeds and try to remove these. Due to which uses of agrochemicals reduced down the timeline. When precision farming came into the picture robots are the best use cases. An autonomous mechanical robot was used to remove the weed from farming land. Robots are equipped with sensor modules, actuators and IoT enabled which makes the things very easy to control from remote area with commands [4].

Lotus being a national flower of India, is closely associated with religion and culture. It is a perennial, aquatic crop that is grown and consumed throughout Asia. The edible parts of lotus are Leaves, flowers, seeds and rhizomes, and the flowers are also used in religious ceremonies. Lotus flowers are also, used for extraction of perfumes. It is one of the oldest plants in the world Archaeologists in China found Lotus seeds with estimated ages of 5,000 years in 1972 in Yunnan Provincelagoons.

During the pre-historic period, the South India Dravidians used lotus flowers (pundarika) as their food, much earlier than the people of the Indus Valley civilization (3000-2000 BC). However, there is no evidence of lotus being present during the Indus Valley culture of the Mohenjo Daro and Harappa period in northern India. The Rigveda reference that lotus was made by the Aryans (2000-1500 BC) wherein it is also mention that lotus can be used as food. Subsequently, lotus was mentioned in the Vedas, Upanishads, Puranas, Slokas, plays and other ancient Sanskrit literature. The lotus symbol is not only mentioned in the scriptures of Hinduism but it also occurs in the Buddhist and Jainism literature.

In the Arthasastra (350-300 BC) by Kautilya, the great diplomat during the golden age of Chandra Gupta, it is recorded that one of the varieties of sandal wood possesses the fragrance of lotus. The Mughal kings were also attracted towards the beauty of lotus. While describing Agra, the Mughal king Jehangir (1605-1627 AD) in his memories Tuzuk-i-Jehangiri, mentioned a memorable scene of a tank full of exquisite red lotus flowers, the like of which he had not seen before.

The World Vegetable Center (previously called as Asian Vegetable Research and Development Centre, AVRDC) with headquarter at Shanhua, Taiwan conducts research, builds networks, and carries out training and promotion activities to raise awareness of the role of vegetables for improved health and global poverty alleviation. Vegetables can alleviate poverty by creating new jobs and new sources of income for farmers and landless laborers, improve health by providing essential micronutrients lacking in diets, enhance learning and working capacities of adults and children through improved diets and health, and improve the sustainability of food production practices by diversifying cropping systems. The Center’s research and development work focuses on breeding improved vegetable lines, developing and promoting safe production practices, reducing postharvest losses, and improving the nutritional value of vegetables (https://avrdc.org). The centre’s mission is Research and Development to realize the potential of vegetables for healthier lives and more resilient livelihoods

Analytical Chemistry

The science involving the determination of the constituents in terms of elements and compounds is called Analytical Chemistry. It is used to identify the substances found in a material and to quantify the exact amount of substances in them.

The basic principles involved in Analytical Chemistry are changes takes place in the substances by the process of combination, decomposition, replacement and double decomposition.

Standard solutions

Standard solutions are solutions of accurately known concentration

Different standard solutions are

Gravimetric analysis

Techniques – analyte is determined by quantitative isolation of substance by precipitation and weighing the precipitate

Precipitation

An ionic phenomena wherein the product of the ionic concentrations of a substance in a solution exceeds the solubility product

Precipitate is often ignited before weighing to convert it into substance of definite chemical composition and chemical stability

Compound precipitated –– precipitated form

Example: Magnesium ammonium phosphate