eChapters

So far much have been talked about the best hydraulic sections, as these appeared to be most economical sections. But as it appears may not be always true and there are exceptions to each individual site conditions.

9.1 Suitable and Economical Cross Section

Best hydraulic sections are most economical in lined and unlined canals. In lined canal this section is economical as long as the cost of earth work (excavation and embankment) is less than the cost of lining per unit length of channel and this is the most usual case. These sections, besides having least area and perimeter also have minimum top width. Therefore land width required is also minimum, in comparison to other wide sections. But if the cost of earth work / excavation is more, such as in rocks, or in very heavy cutting/filling, best hydraulic section do not remain most economical, and recourse to alternative section must be worked out.

Even in unlined channels in deep excavation or in deep filling recourse must be taken to narrower and deeper sections as far as possible.

Also the type of lining in the bed may be cheaper than the lining on sides and in such cases, lining of best section is no more most economical and cost economics of various alternatives including increase in bed width has to be worked out, see para 4.1 and 6.3.

Intellectual property (IP) encompasses creations of the human intellect, including inventions, artistic and literary works, as well as symbols, names, and designs. Intellectual property rights (IPR) are legal mechanisms thaprovide creators with exclusive rights to use, manage, and profit from their creations. These rights help protect the interests of innovators and promote continued creativity and innovation.
Intellectual Property Rights refer to the legal entitlements granted to individuals or organizations over their creative and intellectual works, such as patents, trademarks, and copyrights. These rights grant exclusive control or usage privileges for a specific duration, often creating a temporary monopoly. While the concept of intellectual property began to take shape in the 19th century, it was only during the 20th century that it was formally integrated into global legal frameworks.
Intellectual Property Rights (IPR) safeguard the creations of the human mind, such as inventions, artistic and literary works, brand names, logos, designs, and images used in commerce. These rights help foster innovation by allowing creators and inventors to benefit economically from their work.
Key Points
1. Intellectual Property Rights are legal protections acquired by creators or owners of intellectual works.
2. Intellectual property encompasses intangible assets that result from human creativity and thought.

AGRI BUSINESS MANAGEMENT

Agribusiness is a generic term. It includes food production, farming, seed supply, agrichemicals, farm machinery, wholesale and distribution, processing marketing and retail sales. John. H. Davis of Harvard University first used the term Agribusiness in 1955. Prospects of agri-business India (McKinsey and Confederations of Indian Industry 1997)    
Food industry offers one of the largest opportunities in India today
By 2005 - 07, the food industry will grow three fold to reach us 70 $ billion, and increases in forthcoming year. India can be the world Largest Food Factory
   
India’s food production today is equal to that of USA, second to China
Value added foods will grow faster rates ($30 to $60) million.
Growing the food industry will raise agricultural yields, increases income and create employment and economic development.

India comes in a tropical region and so it has a tropical monsoonal climate. The climate of India is governed by mountain ranges as well as direction of rain winds like south-west and north-east monsoon and alternate season is the main feature of Indian climate. Climate in South India is generally hotter and extremely humid than that of North India.

Seed handling ensures the potential utilization of seed material. Collection and utilization of quality seeds are indispensable in producing quality planting material and better seedling establishment. After selecting the quality seed source, collecting good quality seeds physiologically and genetically is considered the first step in seed handling, followed by processing seeds, testing, storage, and pre-treatment for germination. The main goal of seed handling is to attain an excellent seed survival rate. The chances of seeds getting damaged during any stages of seed handling because of careless or rough approaches are very high.

From the regeneration point of view, the quantity of seed production per tree correspondingly has a vital role to play. If considered virtually, only one successful seed (or two if the species is dioecious) would serve to replace the parent tree(s); hence the production of seeds during the lifetime of a tree is absurd. A full-grown Eucalyptus camaldulensis tree may produce a million or more seeds per year and live further, producing seeds for over a century. Each year’s production could help afforest

1.1. Origin and distribution

• Most species are native to Asia, with smaller numbers are native to Europe, North America and North Western Africa.
• China roses are the ancestor of the present day popular roses.
• Native of Himalayan regions, Asia, China, Japan, Europe and North America.

1.2. Economic importance

• King of flowers
• Symbol of beauty, fragrance and used to convey of love.

The plants collect water by its root system available in the soil medium. A soil rich in nutrients cannot ensure success of crops unless the presence of satisfactory state of water and air, mechanical attributes and thermal regime. The physical properties of soil and plants greatly influence the movement, retention and use of water. The soil should provide sufficient pore spaces and size distribution and decomposition of rocks and for the movement and retention of water for plant needs. Rainwater, irrigation, groundwater, seepage, etc. , contribute in replenishing the water in dried up soils. In all the cases thorough understanding of behavior of water is required to ensure the need of water to plants and optimize the use of irrigation water.

MANGO

(Mangifera indica, Anacardiaceae; 2n=40, Origin; Indo-Burma)

• India contributes 56% of total mango production in the world
• Highest productivity in the world– Venezuela
• Pollination: House fly (Musca domestica)
• The flower is hermaphroditic with male and female flowers in the same flower panicle.
• Inflorescence-Panicle
• Hybridization work was started by Burns and Prayag in 1911 at Pune in MH.
• Caging technique of breeding was used in Mango by Dr. R. N. Singh.
• In mango, only 0.1% flower develops fruit to maturity.
• The optimum temperature range for its growth and development is 24°C to 27°C.
• It can tolerate up to 48°C during fruit development with regular irrigations, which improve fruit size, quality and maturity.
• For flower bud differentiation, suitable temp is13°C–19°C.
• Mangoes are highly susceptible to low temperature injury/Chilling injury.

The concepts of biosafety and biosecurity are central to efforts to protect human health against the risks posed by exposure to hazardous biological agents. Biosafety, a term used to describe the collection of technologies, processes and practices a term used to describe the collection of technologies, processes and practices aimed at preventing the unintentional exposure to biological agents, has in particularaccrued increasing importance in recent decades as a result of the trend towards globalization and concomitant growth in international communication, transport and trade (WHO, 2020). In this international context, the outbreaks of highly-infectious diseases that have occurred in the last years serve to underscore the urgent need for effective prevention and detection and response to biological risks, in accordance with the International Health Regulations (IHR).

Introduction
The most extensive diversity is found in the realms of plants and insects, encompassing over 1 million arthropod taxa, primarily comprising insects, which have been comprehensively described, along with more than 350,000 plant taxa. Notably, a substantial portion of the described insect species serve as either pollinators or herbivores. Over millions of years, insects and plants have coevolved, constantly adjusting and adapting to each other’s characteristics. Plants have developed numerous morphological and biochemical features to withstand damage from insects, while in response, insects have evolved a range of defensive and adaptive mechanisms. These mechanisms include behavioural, morphological, physiological, biochemical, and genetic traits, enabling them to either tolerate or adapt to the defensive traits of plants (Schmelz et al., 2006; Wu et al., 2007; Howe & Jander, 2008; War et al., 2018). Plant defenses against insect pests can be broadly categorized into two main types: antibiosis and antixenosis resistance. Antibiosis involves the direct impact of plant defensive traits on insect growth, development, and survival. In contrast, antixenosis defense relies on morphological or chemical factors that alter insect behaviour, deterring them from feeding and laying eggs on the plant. The trichomes, spines, cuticles, thorns, and lignified cell walls, are the morphological traits of defense that directly protect plants from insect pests. The biochemical defense mechanisms are typically activated in response to insect attacks and are characterized by their dynamic nature (War et al., 2018). Plant volatiles serve a significant function in the indirect defense of plants against insect herbivores. They accomplish this by either deterring the insect pests or by luring the pests’ natural adversaries. Among the various attributes associated with plant defense, chemical barriers, whether they are induced by stress or present constitutively, along with the nutritional composition of the plant, are regarded as particularly crucial for impeding insect growth and development (Peters & Constabel, 2002; War et al., 2019).
Chemical resistance entails the production of secondary metabolites, whether inherently present (constitutive) or induced as a response to a threat, to fortify the plant’s defense mechanisms (Figure 1). Constitutive defense metabolites, initially stored in an inactive state, referred to as phytoanticipins, become activated when herbivores attack. This activation is facilitated by the enzyme ß-glucosidase, which subsequently triggers the release of various aglycone metabolites possessing biocidal properties (Morant et al., 2008). Metabolites that are induced in response to herbivore activity are referred to as phytoalexins. These compounds encompass a variety of substances such as isoflavonoids, terpenoids, alkaloids, and more. They are recognized for their capacity to influence the growth and viability of herbivorous organisms (Walling, 2000). Furthermore, a notable role in imparting host-plant

These crops are cultivated in an extensive scale in large contiguous areas, owned and managed by an individual or a company and whose produce is utilized only after processing e.g. Coffee, Tea, Rubber, Coconut, Cocoa, etc.

3.1 Concepts of Soil Sampling

Samplinginvolvesthe selection fromthe total populationof a subset ofindividuals upon which measurements will be made. The measurements made on this subset (or sample) will then be used to estimate the properties (or parameters) of the total population.Samplingisinherent toanyfield research programinsoilscience because the measurement of the total population is impossible for any realistic study.

Samplingdesign involves theselection of the mostefficient method forchoosing the samples thatwill be used to estimatethe properties of the population. The definition of the population to be sampled is central to the initial formulation of the research study. The sampling design defines how specificelementswill be selected from the population, and these sampled elements form the sample population.

Pedogenetic and soilgeomorphic studies focus on determining the processes thatformed the soilproperties or landscapes under study and the environments that controlled the rates of these processes. Pedonscale studies are closely associated with thedevelopmentof soil taxonomic systems andfocus onvertical, intrapedon processes. Soil geomorphic studies are the interface between quaternary geologyand soil science and soil geomorphologistsfocus on lateral transferprocesses and the historical landscape evolution. Hence sampling is difficult for a particular population and is differentfor differentstudy.

A. Bhattacharya
    
5.1.    Chlorophyll
    
5.2.    Response to Drought Stress
    
5.3.    CO2 Fixation Under Drought
    
5.4.    Response to High Temperature Stress
    
5.5.    Response to Low Temperature Stress
    
5.6.    Effect of Cold Stress on CO2 Fixation
    
5.7.    Cold Acclimation and its Role in Providing Freeze-tolerance
    
5.8.    Response to Salinity Stress
    
5.9.    CO2 Fixation Under Salinity Stress
    
5.10.    Response to High Light Intensity Stress
    
5.11.    Stress-induced Changes
         
    5.11.1.    Effects on Photosynthetic Pigments
    5.11.2.    Effects on Photosystems
    5.11.3.    Effects on Gas-exchange Characteristics        
    5.11.4.    Effects on Activities of key Photosynthetic Enzymes
    
5.12.    Improvement in Photosynthetic Capacity Under Stress by Engineering Photosynthesis-related Genes or Transcription Factors
    
    5.12.1.    Transfer of C4 genes/traits to C3 plants
    5.12.2.    Role of Transcription Factors in Regulation of Genes Involved in Photosynthesis
    
5.13    Role of Mitogen-activated Protein Kinases (MAPKs) in Photosynthesis
    
5.14    Conclusion and Future Prospects
        
References

Introduction 
The preceding chapters have laid a robust foundation, introducing the concept of agricultural systems, delving into the architecture and types of crop models, and meticulously detailing the essential data requirements for their operation. We have established that crop models are powerful tools for simulating the complex interactions within the soil-plant-atmosphere continuum, driven by a rich tapestry of environmental and management inputs. Among these inputs, weather stands out as arguably the most dynamic and influential factor, wielding profound control over every aspect of crop life, from the precise timing of germination to the final quantity and quality of the harvest. Chapter 5 shifts our focus to the direct and indirect consequences of this critical environmental driver: the evaluation of crop responses to weather. This chapter is dedicated to understanding, quantifying, and interpreting how variations in meteorological conditions—such as temperature, solar radiation, precipitation, humidity, and wind—directly influence the physiological processes, developmental progression, biomass accumulation, and ultimate yield of cultivated crops. It‘s about moving from simply providing weather data to actually assessing its impact on the plant‘s performance. The ability to accurately evaluate these responses is paramount for several interconnected reasons: Firstly, from a fundamental scientific perspective, it deepens our understanding of plant ecophysiology. By analyzing how crops react to specific weather patterns, we gain invaluable insights into the underlying biological mechanisms that govern growth and development under diverse environmental pressures. This knowledge is crucial for advancing agricultural science itself. Secondly, for agricultural management and decision-making, this evaluation is directly actionable. Understanding optimal weather conditions for specific growth stages, or predicting the impact of adverse events, enables farmers

Thank you, Dr Tikoo, for a nice introduction and thanks to ATPBR for inviting me to deliver this WebCon. I would like to start with a small introduction that this particular talk is structured as a general introduction to thrips and thrips-transmitted viruses. There is a bit of interest in everyone with regard to the black thrips which has caused havoc in the last couple of years. The topic has significant importance to plant breeders with regard to the new invasive Western Flower thrips, one of the most dreaded thrips, across the globe and the problems associated with the management of resistance in protected cultivation, and, finally how do we go about with regard to the entire management of the thrips and thrips-transmitted virus problems.

1.1. General Discussion of Milk

“The cow is the foster mother of the human race. From the days of the ancient Hindoo to this time have the thoughts of men turned to this kindly and beneficent creature as one of the chief sustaining forces of human life”.

William Dempster Hoard (1836-1918)
Former Governor, State of Wisconsin, USA (1889-1891)
Founder of Hoard’s Dairyman (1885)

The oldest written records of the human race are in Sanskrit and are preserved in India. At the time these records began, about 6,000 years ago, milk had already become an important article of food. In fact, so important was the cow to these early people of South and Central Asia that wealth was measured in numbers of cattle, and the cow was in time made a sacred animal and is still so considered in India.

According to the best authorities, the domestication of cattle must have occurred somewhere between 6,000 and 10,000 years ago. The cow was worshipped in Babylonia, and in Egypt about 20,000 B.C. Over fifty references to cows and milk are found in Old Testament and the Promised Land was described as “a land flowing with milk and honey”.

Milk is the only food of the young mammal during the first period of its life. The substances in milk provide more energy and the building materials necessary for growth. Milk also contains antibodies which protect the young mammal against infection. A calf needs about 1000 litres of milk for growth, and that is the quantity which the primitive cow produces for each calf. There has been an enormous changes since man took the cow into his service. Selective breeding has resulted in dairy cows which yield more than 5,000 litres of milk per calf, i.e. five times as much as the primitive cow. Some cows can yield 10,000 litres or more.

Children with developmental challenges may experience difficulties affecting physical movement, cognition, communication, learning, behaviour, sensory functioning or social participation. This chapter develops awareness of different disabilities, their characteristics, possible causes, assessment and educational implications. It covers intellectual disability, autism spectrum conditions, learning disabilities, hearing and visual impairment, speech and language problems, cerebral palsy and behavioural difficulties. Questions also examine inclusive and special education, early identification, intervention, rehabilitation, family support and the roles of teachers and professionals. Attention is given to government programmes, legislation and institutional services designed to protect children’s rights and promote their development, education, independence and inclusion within society.

3.1 Soil Inhabiting Fungi

There’s a wild and wonderful world that remains hidden for most of us, at least most of the time. It’s an amazing ecosystem filled with fascinating creatures interacting with one another to create an intricate, dynamic web of life. It’s right under our feet: the soil ecosystem! Many organisms make up this ecosystem, and some of the most important ones are the fungi. Healthy soil is alive and teeming with an array of fungus species, each playing a vital role in its environment. Healthy soils are alive with an especially diverse array of fungal species, and many are essential to the health of the plants growing in that soil. In fact, a soil devoid of fungi is a dead soil, and is unlikely to support thriving plants. Some soil fungi are single-celled and visible only through a microscope. Others form large, underground networks of filaments that can cover an area the size of a football field or larger. Most of us are familiar with the above-ground parts of some soil fungi, the mushroom.

Fungi are one of the key microbial groups in terrestrial ecosystems that enabled colonization of land by plants and facilitated development of soil that supports most of the biota on Earth. The kingdom Fungi is one of the most diverse groups of life with an estimated 1.5–6 million species that represent heterotrophic mutualists, pathogens, and saprotrophs (Tedersoo et al., 2017). The 70,000–100,000 currently recognized species are distributed among 156 orders, 46 classes, and 12 phyla. Fungi have traditionally been identified and classified based on morphological characters of fruiting bodies and living cultures. Similar to bacteria and archaea, merely <1% of fungal species have been cultivated with established protocols, which renders large taxonomic groups undescribed and virtually unknown to science. Roughly 80% of all soil-inhabiting fungal taxa cannot be identified at the species level, and 20% cannot be reliably assigned to known orders.

4.1. PESTS OF FIELD CROPS

Insect pests are the major constraints limiting agricultural productivity growth. It is estimated that herbivorous insects eat about 26 percent of the potential food production. Emerging problems of insecticide and disease resistance, secondary pest outbreak and resurgence further add to the cost of plant protection. Annual crop losses due to insect pests and diseases in India are estimated to be 18 percent of the agricultural output. Main causes of emerging pest and disease are favourable prevailing weather condition, absence of natural enemies, abundant food supply, use of pesticides, use of fertilizers and irrigation.

PESTS OF RICE

Borers and Defoliators

Genesis of Soil

World’s geography is very widely diversified in relief showing various features like mountains and hills covered with snow and trees, glaciers, higher altitudes to plain to lowest valleys, forests to barren lands, fertile fields to waste lands, plateaus, deltas, swamps, lowlands, deserts etc. Temperature varies from arctic cold to scorching hot of equator, Rainfall from aridity to per humidity. All these situations and conditions under different sets of combinations generate and develop numerous types of soil from a single type of parent material. Therefore, many types of soils may develop at a smaller area.

Physical, chemical and biological weathering processes disintegrate and decompose various rocks and minerals to make asymmetrical soil parent material. This parent material is converted in to the soil profile by soil forming processes in the presence of soil forming factors. Soil genesis is defined as mode of formation of the soil from the parent material due to the action of soil forming factors and processes. Parent material, Factors of soil formation and Processes of soil formation, are three main part of soil genesis. These are described here:

1. Parent Material,

2. Classification of parent material,

3. Factors of soil formation,

4. Processes of soil formation,

5. Types of soil forming processes.