eChapters

Introduction
For setting up a fruit processing plant, the following cost and non-cost factors affecting the plant’s location are considered. Cost factors include raw material cost, transportation cost, cost of land, building and machinery, utilities cost, taxes, and insurance costs. At the same time, non-cost factors consisting of wages, salaries and incentives, market potential, community attitude, cost regulation, quality of life (school, living, recreation for workers, etc.), and environmental impact are taken into consideration. The main objective for the selection of the site for the processing unit is to minimize the sum of all costs. To minimize the cost, one should think not only the today’s costs but about long-term costs as well.
Plant Layout
The advantages of good plant layout are: -
i. Saving in floor space
ii. Increased output
iii. Fewer production delays
iv. Reduced material handling cost
v. Greater utilization of machine and manpower
vi. Easier and better supervision
vii. Less congestion and confusion
viii. Better appearance and more sanitary condition of work areas
ix. Reduced risk to the health and safety of employees

Introduction: Food processing involves different steps from receiving raw material, preparing for product manufacture, and packaging to storage. All these steps are called unit operations. They are broadly categorized as raw
material preparation (receiving, sorting, grading, washing, peeling, blanching, slicing, cutting, dicing etc), processing (canning, drying, pulping, juicing, product manufacture like jam, jelly, preserves, candies, pickling, sauce making, etc.) and post-production handling including packaging and storage. A brief detail about each unit operation is discussed as under:
1. Raw Material Handling
Material handling includes varied operations such as hand or mechanical harvesting on the farm, transportation in trucks or refrigerated vehicles of perishable produce to the market or to the processing plant or to store/godowns. For conveying, a wide variety of mechanical conveyors is used depending on the type of material. Common conveyors used in the processing plant include screw conveyors, bucket conveyors, belt conveyors and vibratory conveyors. Throughout these operations, care is taken to maintain sanitary conditions, minimize bruises and product loss, maintain raw material quality like physical appearance, and vitamin contents, minimize microbial growth and minimize other detrimental changes to the product quality during handling etc. It also includes other unit operations like receiving, cleaning/washing, sorting, grading, peeling, halving, slicing, blanching etc for preparation of fruit and vegetables for processing.

Introduction
Food preservation refers to an art or science which deals with the process of prevention of decay, deterioration or spoilage of food commodity to allow it to be stored in a safe condition for future use. All foods gradually undergo deterioration or spoilage from the time immediately they are harvested or manufactured. Some commodities spoil rapidly, while others can keep longer but for limited periods. The basic purposes of food preservation are:
1. Extension of shelf life of foods thus increasing the supply
2. Ensuring the availability of seasonal foods throughout the year
3. Adding variety to the diet
4. Saving time by reducing preparation time and energy
5. Stabilizing farm prices and prices of food
6. Improving the nutritional qualities The food spoilage can be caused due to growth and activity of micro-organisms, insects or rodents, action of enzymes, chemical reactions and physical changes that takes place during processing, drying, or freezing etc. Classification of Food Depending upon the type of spoilage and level of perishability, the foods are classified into three broad categories:

Introduction
Food Pipe Line refers to a post-harvest system that deals with ensuring the delivery of a crop/commodity from the time and place of harvest to the time and place of consumption, with minimum loss, maximum efficiency, and maximum returns to all concerned including the grower, processors, and consumer. The term ‘system’ represents a dynamic, complex aggregate of logically interconnected functions or operations within a particular sphere of activity. The term pipeline refers to the functional succession of various operations but tends to ignore their complex interactions.
Stages of the post-harvest system
The food commodities broadly undergo different stages/operations of postharvest systems right from harvest to consumption. However, the applicability of different stages varies with the type of crop. Different unit operations involved in the post-harvest system of food commodities are as under:
1. Harvesting
2. Threshing (food grains, pulses and oilseeds)
3. Drying (food grains, pulses and oilseeds)
4. Collection, Sorting, grading, packaging (Horticultural Crops)
5. Transportation and distribution
6. Storage (Godowns, cold stores, CA stores)
7. Processing

Introduction
Fruits and vegetables are an important part of the human diet as they provide the necessary nutrition, essential minerals, vitamins, antioxidants, dietary fiber, etc., required for maintaining proper health. India is the second largest producer of fruits and vegetables in the world after China. Comparison of area under horticultural crops during 2011-12 and 2021-22 indicate substantial improvement from 18.5 million ha to 27.6 million ha with a simultaneous increase in production from 215.04 million MT to about 333.25 million MT respectively in the country within a span of just one decade (Table 1.1). The credit for this spectacular growth in area and production goes to the sustained efforts of the central and state governments for the launch of several farmers’/ growers’ welfare schemes viz., National Horticulture Mission (NHM), Horticulture Mission for Northeast and Himalayan states (HMNEH), Mission for Integrated Development of Horticulture (MIDH); R&D support by the ICAR and State Agriculture & Horticulture Universities, extension agencies/Krishi Vigyan Kendra and proactive farmers and orchardists. However, the increase in production has still not kept pace with the improvement in infrastructure for post-harvest handling, management, processing, and value addition. Various studies still indicate that under normal conditions more than 15-20% of the produce goes to waste from production to consumption which in monetar terms accounts for huge economic losses. A recent study sponsored by the Ministry of Food Processing Industries Government of India and conducted by NABARD Consultancy Services has indicated that about 19.33 million MT worth Rs 58013.71 Crores of fruit & vegetables goes to waste annually as postharvest loss (4.87-15.05%) in various channels from harvesting to consumption (NABCONS,2022). The condition becomes even worse when there is a glut in the market, road blockades, or seasonal vagaries, and farmers are forced to leave their produce in the field itself without harvesting or dispose it at throwaway prices. Such a situation can, however, be controlled by diverting thisproduce to processing for conversion into a number of value-added products for its later use in human consumption. Thus, processing and preservation of horticultural crops have now become a necessity rather than a luxury.

Grape (Vitis vinifera L.) is one of the most valuable and popular fruit crops all over the world (Mohsen, 2021). In India, grapes are mainly grown for table, raisin and wine making. Major grape producing countries are China, Italy, France, Spain, USA, Turkey, and India while, major wine producing countries are France, Italy, Spain, and USA (OIV, 2024). According to an estimate, grapevine is spread on an area of 1.71 lakh ha and production was 37.81 lakh MT in the country during the year 2023-24 (NHB, 2024). India ranks first in world for grape productivity and 7th for grape production during 2023-24 (APEDA, 2024).
Traditionally, grapes are grown on their own roots. However, due to deteriorating soil and water conditions, the use of rootstocks has become essential in the tropical climate of India to maintain production (Singh and Sharma, 2005). The grape industry which is important to produce wine and table grapes is facing  significant challenges due to changing climatic conditions. Climate change has led to increased temperatures, altered precipitation patterns, and more frequent extreme weather events, all of which can adversely affect grapevine health and productivity. To combat, the role of grape rootstocks has become increasingly vital for maintaining sustainable viticulture. Grape rootstocks are the belowgraft joint part of the grapevine onto which the scion variety is grafted. These rootstocks are typically derived from species of Vitis genus other than Vitis vinifera, the primary species used for grape production.

India, internationally recognized as the principal producer, consumer and exporter of spices globally, is often referred to as the spice bowl of the world. A total of 75 spices out of 109 are cultivated in the country, among which
pepper, cardamom, chillies, ginger, turmeric, coriander, cumin, and fenugreek are of significant importance. The approximate export of spices during 2021- 22 was 15,31,154 MT valued at 30,576.44 crore (US $4,102.29 million)
compared to 17,58,985 MT valued at 30,973.32 crore (US $ 4,178.80 million) during the previous financial year. Indian spices are exported to more than 180 destinations, with the leading importers being USA, China, Bangladesh, Thailand, UAE, Sri Lanka, Malaysia, UK, Indonesia, and Germany. The key spice-producing states of India include Himachal Pradesh (ginger), Haryana (garlic), Karnataka (pepper, ginger, cardamom (small), chilli, turmeric and garlic), Orissa (ginger, chilli, turmeric, and garlic), Kerala (pepper, chilli, turmeric, nutmeg, mace, and clove) and Rajasthan (coriander, chilli, cumin, garlic, fenugreek, fennel, and ajwain).
Seed Spices in Rajasthan Economy
Of the 75 spices grown in India, 20 are classified as seed spices, where the economically important part is the seed.

Okra (Abelmoschus esculentus Moench), known in many English-speaking countries as lady’s finger or gumbo, belongs to family Malvaceae. The geographical origin of okra is disputed and supposed to be South Asian, Ethiopian and West African origins (Anonymous, 20013a). Its proposed parents are reported to be in South Asian; therefore, it is believed that perhaps it is of South Asian origin. However, because of greater diversity in okra in West African region, it is considered to be originated in West Africa. Masters (1875) proposed that it originated in India.
Okra is cultivated in tropical, subtropical and warm temperate regions, including the Middle East, Africa, Brazil, Turkey and southern states of USA (IBPGR, 1990; Jideani and Adetula, 1993; Acquistucci and Francisci, 2002). In tropics it is cultivated during summer and in the warmer parts of the temperate regions. It is an annual or perennial plant, growing up to 2 m height. The leaves are 10–20 cm long and broad, palmately lobed with 5-7 lobes. The flowers are 4–8 cm in diameter, with five petals which are generally yellow, but often white with a red or purple spot at the base of each petal. The fruit is a capsule which may attain length up to 18 cm containing numerous round seeds. Okra is an allopolyploid of uncertain parentage (proposed parents include Abelmoschus ficulneus, A. tuberculatus and a reported “diploid” form of okra).

Introduction
Vegetable crops are highly susceptible to biotic stresses indicated by disease causing micro-organism (fungi, bacteria, virus and phytoplasma). Indiscriminate use of chemicals for the control of diseases, insect pest have
several disadvantages, particularly increased cost of cultivation, residual toxicity in food chain and development of resistance against pathogen. Management of diseases involves use of resistant varieties and integration of cultural and chemical control measures. Of the biotic stresses much of the breeding efforts have been directed towards developing resistance against diseases. In fact, breeding for resistance, has been one of the most important objective of vegetable breeder in the last half of the century. Genes that contribute to pathogen tolerance/resistance can be obtained from local germplasm resources, or through exotic lines, wild species or genera, or lines from other breedingprograms. In the biotechnological approaches for vegetable breeding also,  most of the achievement has been to generate transgenic plants resistance to disease. Often breeding for resistance has assumed greater importance in a number of vegetable crops.
Major Diseases of Tomato
Early blight: The casual organism is Alternaria solani. The symptoms appears as small, black spots with enlarged and concentric rings in a bull’s eye pattern in the center of the leaves. Tissue surrounding the spots may turn yellow. On fruits, dark brown concentric rings are seen that affects the market quality.

Vegetable crops belonging to the family Cucurbitaceae are known as cucurbits. These include 950 species in over 90 genera, mainly distributed in the tropics and subtropics (Schaefer and Renner, 2011). Enormous diversity of cucurbit genetic resources has evolved in past centuries to cater the nutritional requirements of people in different geographical and climatic regions. A large number of cucurbitaceous vegetables coming from different centres of origin are cultivated worldwide (Table 1). However, these crops are challenged by several biotic and abiotic stresses. Cultivated varieties are constrained by market demands, the necessity for climatic adaptations, domestication bottlenecks, and in most cases, limited capacity for interspecific hybridization, creating narrow genetic bases for crop improvement. Genetic resources are the building block for any crop improvement programme and includes landraces, traditional varieties, wild, weedy and other related species constituting primary, secondary and tertiary gene pools. They are valuable sources of important genetic traits needed for developing resilient and climate smart crop varieties and therefore, important for food security. The success and pace of the development depends on the efficient use of plant genetic resources. Wild relatives are incredible genetic resources carrying several desirable attributes like nutritional quality, resistance to biotic and abiotic stresses etc. Most of the crop wild relatives of cultivated crops across the world are not receiving adequate attention for their effective utilization in breeding programs. It is therefore, of utmost priority to protect them in the wild, through in-situ conservation, where they can continue to evolve and develop these useful adaptations. ICAR-National Bureau of Plant Genetic Resources (ICAR-NBPGR) is the nodal agency for the management of national wealth of vegetable genetic resources speciallyworking for collections, characterization, identification and documentation of new germplasm. Besides, it also bears the responsibility for conservation of the germplasm for future through sustainable use. The Vegetable germplasm is being conserved both under in-situ and ex-situ genebanks. This chapter highlights the status of Cucurbit genetic resources and procedures to access the germplasm by various stakeholders for research use.
 

Globally, India ranked second in vegetable production and contributed 15.8 and 14% to global vegetable area and production, respectively. The production of vegetables in India is estimated to be 212.91 million tonnes in the year 2022-23 compared to 209.14 million tonnes in the year 2021-22. India ranked first in production of okra in the world (73% of world production) and second in brinjal (27.55%), cabbage (13%) and tomato (11%). The major vegetable growing states in India are West Bengal (14.1%), Uttar Pradesh (11.4%), Bihar (9.3%), Madhya Pradesh (8.0%) and Gujarat (7.1%). Vegetables are especially important crops for farmers with small holdings because an appreciably higher income per hectare can be generated by growing vegetables than from conventional staple crops (Genova et al, 2006). However, vegetables are generally considered more vulnerable than staple crops to stressful environmental conditions including extremes of temperatures, drought, salinity, alkalinity, water logging, mineral nutrient excesses and deficiency (Chinnusamy et al, 2005). These environmental stresses are likely to be exacerbated by the prevalent climatic changes in many parts of the world.
Among environmental factors, soil salinity stress is one of the main factor reducing production and productivity of vegetables in arid and semi-arid regions where irrigation water has excessive salt and annual rainfall is low. In India, about 6.73 million ha of land (~2.1% area of the country) is salt affected, out of which 2.96 million ha is saline and 3.77 million ha is sodic (Arora & Sharma 2017). About 75% of salt-affected areas exist in four states, i.e., Gujarat, Maharashtra, West Bengal, and Rajasthan (Mandal et al., 2018).

The perennial nature of fruit crops coupled with high heterozygosity, protracted juvenility, and lack of information on inheritance patterns of important traits of economic significance is responsible for slow progress in breeding of fruit crops. Citrus is one of the most popular fruit crops cultivated in around 140 countries of the world mainly in the Asia-Pacific region. In Asia, citrus fruits are a major crop for the local people in meeting their nutritional requirements and livelihood. Citrus is cultivated as an indispensable cash crop both for domestic consumption and the export market. Recently, the citrus production has shown an increasing trend mainly attributed to its increased demand as a nutritious and healthy drink owing to the possession of many medicinal and antioxidant properties in its fruits.
The clonal selection has been used primarily as one of traditional breeding methods because bud sport mutations arise frequently in Citrus (Iwamasa et al., 1981; Uzun et al., 2004). This method of breeding generally offers many advantages to select clones suitable for their identified uses. Yield and fruit quality are the major targets of breeding and both these can be enhanced through clonal selection of natural mutants or seedlings. The major aim of the clonal selection studies is the selection of clones bearing regularly for many years, improved fruit appearance and tolerance to biotic and abiotic stresses. In general, identifying the elite clones, testing them under different climatic conditions, and freeing them from the virus and virus-like pathogens carried by the mother plants are major steps involved in clonal selection (Ulubelde et al., 1986) for the improvement of fruit crops.

Litchi (Litchi chinensis Sonn.), a subtropical perennial fruit tree, belongs to family Sapindaceae and is indigenous to China. Its cultivation spread to the neighbouring countries of the south-east Asian region and other countries. The fruit of litchi is small, heart-shaped, conical or spherical in shape and pinkish red to bright-red in colour, with varying colour intensity in different cultivars. The pulp of fruit is crispy and grape-like in texture, very succulent and aromatic and is generally characterized by a sweet, acid, juicy and soft taste. Because of these reasons, litchi is highly prized in its fresh form as well as in different processed formulations. The total litchi production is about 24,00,000 tonnes from the net cultivated are of about 8,00,000 ha. The main litchi-producing countries are China, India and Thailand, whereas it is commercially grown also in many other countries. Of the total world litchi production, China and India contribute about 90%. Although litchi plants are long-lived, even then new plantings of this fruit are being done regularly, ensuring the continuous growth of production at the global level. In India, where this fruit can be grown in off season also in the southern states of Karnataka, Tamil Nadu and Kerala, the litchi production is about 7,37,200 tonnes from an area of 99,170 ha (Chandrakala et al., 2023).
 

Probably since the beginning of human life on the planet, they have used local fruits and vegetables. For a long time, they have enjoyed the fruit of the wild trees without knowing how to successfully produce them. Such native fruit trees have many advantages. These trees have an extraordinary genetic diversity that can be exploited in breeding programs and genetic advancement of domestic varieties (Khadivi et al., 2020). Many indigenous fruits are still highly valuable, and the harvesting and selling of these forest fruits contribute significantly to the local economy of families in the area. The product collected from forest trees is completely healthy and in terms of quality, they may even be equal to “organic fruits”. In a most recently published book chapter entitled organic pomegranate production in Iran, compiled by Alizadeh and Varasteh (2024), wild pomegranates were considered as noble source of healthy food. Given the multifunctional, ubiquitous nature of wild edible fruits the present chapter was compiled to introduce wild fruit trees of northern Iran with a focus on providing more detailed information about wild pomegranates.
Geographical Aspects of Northern Iran Northern Iran
is a geographical region encompassing a relatively large and fertile area, located along the southern border of the Caspian Sea and the Alborz Mountains. Upon closer examination of the map of Iran (Fig. 1), one can identify three northern provinces: Golestan, Mazandaran, and Gilan. These provinces all share borders with the Caspian Sea and the Alborz Mountains. The Alborz mountain range extends from the western border with the Republic of Azerbaijan to the eastern border with Turkmenistan (Fig.1).

A family of 56 genera and over 1,300 species, Zingiberaceae are distributed in tropical regions, chiefly in Indomalaysia. About 17 genera and over 115 species have been reported from India, chiefly in Western Ghats and Eastern Himalayas. Some largely represented genera along with number of their world over reported species are Alpinia (250), Amomum (150), Costus (150), Zingiber (90), Kaempferia (70), Curcuma (60), Hedychium (50), Globba (50) and Elettaria (7).
Selected Indian Genera
Alpinia, Amomum, Costus, Curcuma, Elettaria, Hedychium, Zingiber.
Economic Importance
1. Spices and condiments: Seeds of Amomum cardamom (Badi elayachi) and Elettaria cardamomum (true cardamom), roots of Alpinia officinarum (gangal root) and rhizomes of A. gangala (Siamese ginger), Curcuma longa (turmeric) and Zingiber officinalis (ginger) are used as spices, condiments and flavouring agents. Ginger oil, obtained from rhizomes of Z. officinalis, is used in perfumery and for medicinal purposes. Turmeric is also used for medicinal purposes.

A family of about 23 genera and 800 species, Violaceae are distributed in both tropical and temperate regions. Only three genera (Hybanthus, Vahila and Viola) have been reported from India. Famous pansies, violas and violets belong to this family. Some of the larger genera with their approximate number of species in parenthesis include Viola (500), Rinorea (340) and Hybanthus (150). Majority of Indian Violaceae are found in Himalayas and hills of
southern and western India.
Garden pansy is an annual or perennial herb planted in flower beds worldwide owing to its pretty shape and contrasting colour markings, looking like a butterfly. It is called as ‘King of annuals’. In horticultural industry, there are variety of forms, sizes, and shapes of pansies which are employed for landscape planting, garden design, and container gardening. With the advent of F1 hybrids, pansies are known as high quality bedding plants. Dried flowers of Viola odorata Vern. are used against cough, influenza, and lung troubles while oil obtained from flowers is used in perfumes and flavourings.
Selected Indian Genera and Species
• Except for garden favourites, such as pansies, violas and violets, the family is of little economic importance. Over 100 species of Viola, are being grown as ornamental plants.

A family of about 86 genera and 3,000 species distributed chiefly in tropics and sub-tropics. About 22 genera and over 30 species have been reported from India. Some of the genera along with their number of approximately reported species and common names of them are Clerodendron (400, glory-flower), Verbena (250, vervain), Vitex (250, chaste tree), Lippia (220, Frogfruit), Lantana (150), Callicarpa (140, beauty-berry), Stachytarpheta (100) and Tectona (3, teak).
Verbena is popular ornamental plant suitable for flower gardens, hanging baskets, and balcony boxes. They are excellent both as ground cover for rockeries, and as bedding types. These plants abundantly flower in the seedin year and, thus, are grown as annual plants.
Selected Indian Genera
Clerodendron, Duranta, Lantana, Tectona, Verbena, Vitex.
Economic Importance
1. Timber yielding plants: Teak, one of the most famous timber-yielding plants of the world, belongs to Verbenaceae. It is used for high quality furnitures, heavy constructions, ship building, musical instruments and several other similar purposes. Some other timber-yielding plants are Gmelina arborea, Premna benghalensis and Vitex altissima.

A family of about 90 genera and 3,000 species distributed in both tropical and temperate regions. Central and South America are the chief centres of distribution where over 40 genera are found. About 15 genera and over 90
species have been reported from India. Some of the larger genera along with their approximately world over reported species (Hickey and King, 1988) are Solanum (1700), Cestrum (150), Physalis (100), Lycium (80-90), Nicotiana (66), Capsicum (50), Petunia (40), Hyoscyamus (20) and Datura (10). Solanum tuberosum (potato) and Nicotiana tabacum (tobacco) are the two most utilized plants of Solanaceae.
Petunias, popular bedding plants, with variety of forms, sizes and shapes are employed for landscape planning, garden designs and container gardening. The numerous phenotypes viz., Grandifloras, Multifloras, Millifloras, Waves, Hedgifloras, etc. are complex hybrids. The outstanding marketable series of P. x hybrida have been developed for upright, spreading and semi-trailing to trailing habits.
Selected Indian Genera
Atropa, Capsicum, Cestrum, Datura, Nicotiana, Petunia, Physalis, Solanum, Withania.

Represented by about 65 genera and 1,730 species, Scrophulariaceae are cosmopolitan in their distribution. About 60 genera and 360 species have been reported from India, chiefly from the Himalayas. Some of the genera along with their approximately reported species from world over are Pedicularis (500), Calceolaria (300-400), Scrophularia (300), Verbascum (300), Veronica (300), Penstemon (280, Linaria (150), Castilleja (150), Selago (150), Sutera (130), Mimulus (100), Antirrhinum (40) and Digitalis (20). The common names of the family (snapdragons, foxglove or figwort family) are because of its genera Antirrhinum (snapdragons), Digitalis (foxglove) and Scrophularia (figwort).
Selected Indian Genera
Antirrhinum, Digitalis, Linaria, Lindenbergia, Mazus, Verbascum, Veronica.
Economic Importance
1. Ornamental plants: Include Angelonia angustifolia, Antirrhinum majus (snapdragon), Calceolaria scabiosaefolia (slipperwort), Castilleja (Indian paintbrush), Chelone glabra (turtlehead), Collinsia grandiflora, Digitalis purpurea (foxglove), Linaria vulgaris (toadflax), Mimulus luteus (monkey flower), Nemesia versicolor (Nemesia), Paulownia tomentosa, Pedicularis canadensis (housewort), Russelia juncea (coral blow), Torenia asiatica and Veronica bungifolia (speedwell).

A family of about 611 genera and 13,150 species, Rubiaceae are chiefly distributed in tropics, but some are distributed in temperate or even arctic regions. About 75 genera and 275 species have been reported from India, chiefly in tropical and sub-tropical eastern Himalayas. Some of the largely represented genera with their approximately reported species (Hickey and King, 1988) include Psychotria (700), Galium (400), Ixora (400), Gardenia (250), Mussaenda (200), Asperula (200), Cephaelis (180), Rondeletia (120), Coprosoma (90), Guettarda (80), Rubia (60), Coffea (40) and Cinchona (40). Two most important plants of the family are Coffea arabica (coffee-yielding plant) and species of Cinchona (quinine-yielding plant).
Economic Importance of Selected Genera and Species
Some of the common ornamental plants grown in gardens and roadsides include Anthocephalus cadamba (Kadam), Cephalanthus occidentalis, Galium verum (Ladies Bedstraw), Gardenia jasminoides (Jasmine), Hamelia patens, Hamiltonia suaveolens (Padera), Ixora arborea, I. coccinia, Morinda tinctoria, M. frondosa, M. luteola, Pentas lanceolatea and Rondeletia.