eChapters

Biotic stresses include diseases and insect pests which cause serious damage to the crop plants and ultimately yield loss. Biotic stresses can be listed as follows:

• Diseases caused by pathogens which include fungi, bacteria, and viruses
• Insects
• Nematodes
• Parasitic weeds

Another category of stresses are called as abiotic stresses which are caused by environmental factors as:

• Water stresses (water logging, drought)

Reproduction by asexual means is common among higher plants. The best known means of asexual reproduction are by corms, bulbs, rhizomes, stolons, or other vegetative organs. Plants normally propagated in agricultural practice by these means or by budding or grafting include nearly all fruit and nut trees, strawberries, blackberries and raspberries, grapes, pineapples, almost all ornamental shrubs and trees and a few field crops such as sugar cane, potatoes, and sweet potatoes. Asexually or clonally propagated plants produce genetically identical progeny. Clones are identical copies of a genotype. Together, they are phenotypically homogeneous. However, individually, they are highly heterozygous and segregate widely upon sexual reproduction. This is not unexpected, because the types selected as commercial cultivars are likely to be vigorous ones, and a positive correlation exists between vigour and heterozygosity in most species.

Any organism with other than two basic sets of chromosomes, that is, monoploid, triploid, tetraploid, and various aneuploids is termed as polyploid. There are several economically important crops which are natural polyploids emphasizing the economic importance of polyploids in agriculture. These are:

Triploid-Banana

Autotetraploid-Alfalfa, potato, coffee, peanut or groundnut Autohexaploid- Sweet potato

Amphidiploid/allopolyploid-Wheat, cotton, oats, Brassica species (B. carinata- Ethiopian mustard, B. juncea-Indian mustard, B. napus--rapeseed), sugarcane

Man-made commercially successful allopolyploid- Triticale

Mutation is defined as a sudden heritable change in gene or in chromosome structure. The process of hereditary change is termed mutation and the individuals affected by the change are called mutants. Besides recombinations, mutations are the cause of genetic variation from which every breeding activity proceeds. By means of mutations, the multiplicity of the types of a population is not only increased by one genotype, but also by large number of further new genotypes due to possibility of subsequent recombinations of mutant with the existing genotypes.

Recurrent selection is a method of breeding applicable to cross-pollinated crops, designed to concentrate favourable genes scattered among a number of individuals by selecting in each generation among the progeny produced by mating inter se of the selected individuals (or their selfed progeny) of the previous generation. The concept of recurrent selection grew out of need to increase the number of superior genotypes that could be obtained from breeding stock of corn. This could have been possible by increasing the frequency of superior genes in the gene pool and by increasing the chances for genetic recombination to occur. The original idea behind recurrent selection was proposed first by Hayes and Gerber in 1919 and independently by East and Jones in 1920. Jenkins (1940) was the first to describe the method in detail and Hull (1945) proposed the name ‘recurrent selection’. Each cycle of recurrent selection requires:

Composites defined as advanced generation populations maintained by random mating in the material constituted through mixing of equal quantity of seeds of crosses showing less inbreeding depression in F2 over F1. The components of composites inbreds, open-pollinated populations, locally available open-pollinated cultivars, hybrids, advanced generation lines, improved populations. Mixing the seeds of several phenotypically outstanding lines produces a composite variety and encouraging open pollination to produce crosses in all combinations among, the mixed lines. The lines used to produce a composite variety are rarely or not tested for combining ability with each other like as done in case of synthetics where the combining ability of the component lines is invariably tested for GCA. Composite are commercial varieties and are maintained by open - pollination in isolation. While mixing the seeds of various genotypes, care should be taken that the component lines are similar in maturity height, seed size, colour, etc. so that the composite maintained through random mating in isolation manifests a reasonable degree of phenotypic uniformity. The variety is maintained by open pollination. Farmers can use their own seed for 3 to 4 years.

A variety produced by crossing inter se a number of genotypes selected for good general combining ability in all hybrid combinations with subsequent maintenance of the variety by open-pollination. Synthetics development is common in cross- pollinated crops in the early phases of breeding. The synthetic method of breeding is suitable for improving cross-fertilized crops. It is widely used to breed forage species. Successful synthetic cultivars have been bred for corn, sugar beets, and other species like cauliflower in India. The suitability of forage species for this method of breeding stems from several biological factors. Forages have perfect flowers, making it difficult to produce hybrid seed for commercial use. The use of male sterility may facilitate controlled cross-pollination, which is difficult to achieve in most forage species. To test individual plants for use in producing the commercial seed, it is essential to obtain sufficient seed from these plants. The amount of seed obtained from single plants of these species is often inadequate for a progeny test. Furthermore, forage species often exhibit self-incompatibility, a condition that inhibits the production of selfed seed. Synthetic cultivars are also used as gene pools in breeding progeny. Synthetic cultivars are advantageous in agricultural production systems where farmers routinely save seed for planting. One of the well-known and widely used synthetic has been the Iowa stiff- stalk synthetic (BSSS) of maize.

The term hybrid or hybrid variety is used to designate F1 populations that are used for commercial plantings. Such F1 populations are obtained by crossing clones, open-pollinated varieties, and inbred lines that are genetically dissimilar. Historically the first attempts to make practical use of fortunate mating system of maize came late in the nineteenth century by W. J. Beal in Michigan, stimulated by Darwin’s work on inbreeding and outcrossing. Beal suggested use of F1 varietal crosses to exploit heterosis for commercial crop. The hybrid seed was to be produced by detasseling alternate rows. It was George Harrison Shull (1909) who first suggested a pure line method of corn breeding based on inbred lines obtained by continued self-fertilization and the use of F1 hybrids between these inbred lines for the production of commercial crop. His proposal was to make use of single crosses (hybrids between two inbred lines) based on the superior performance of the hybrids in various combinations between the inbred lines.

Backcross breeding is defined as system of breeding whereby recurrent backcrosses are made to one of the parents of a hybrid, accompanied by selection for a specific character or characters. It is basically applicable to self-pollinated crops and is precise way improving varieties that excel in large number of desirable attributes but lack in a few characteristics. This method makes use of a series of backcrosses to the variety to be improved during which character for which improvement is sought is maintained by selection. At the end of the backcrossing, the gene to be transferred remains in heterozygous condition and selfing after the last backcross produces homozygosity for the gene under transfer. As a result, the improved variety will remain like recurrent variety in terms of yield, adaptability, quality features, etc. will be superior for the character which was planned to be transferred from the donor parent.

The application of backcross breeding in plants was first proposed by H.V. Harlan and M.N. Pope in 1922. In principle, backcross breeding does not improve the genotype of the product, except for the substituted gene(s).

Single seed descent (SSD) method of breeding is applicable to self-pollinated crops. The method of single seed descent (SSD) was born out of a need to speed up the breeding programme by rapidly inbreeding a population prior to initiating individual plant selection and evaluation while reducing a loss of genotypes during the segregating generations. SSD procedure is based on advancing generations through single seed from each plant in each generation. This separates the inbreeding phase from the selection phase and the population reaches F6 generation faster. This procedure carries forward maximum number of F2 plants to a stage near homozygosity, i.e. F6. It was first proposed by C. H. Goulden in 1941 when he obtained the F6 generation in two years by reducing the number of generations grown from a plant to one or two while conducting multiple plantings per year using greenhouse and off-season planting. H. W. Johnson and R. L. Bernard described the procedure of harvesting a single seed per plant for soybean in 1962. However, it was C.A. Brim who, in 1966, provided a formal description of the procedure of single seed descent, calling it a modified pedigree method.

Bulk population method of breeding is defined as the growing of genetically diverse populations of self-pollinated crops in a bulk plot with or without mass selection, followed by single plant selection. It is applicable to self-pollinated crops and not applied to cross-pollinated crops. Bulk population breeding is a strategy of crop improvement in which natural selection effect is solicited more directly in the early generations of the procedure by delaying stringent artificial selection until later generations. The Swede, H. Nilsson-Ehle, developed the procedure. H.V Harlan and colleagues provided additional theoretical foundation for this method through their work in barley breeding in 1940s. As proposed by Harlan and colleagues, the bulk method entails yield testing of the F2 bulk progenies from crosses and discarding whole crosses based on yield performance. In other words, the primary objective is to stratify crosses for selection of parents based on yield values. The current application of the bulk method has a different objective.

Pedigree method of plant breeding is defined as a method of breeding in which individual plants are selected in the segregating generations from a cross on the basis of their desirability judged individually and on the basis of a pedigree record. This has been the most widely used method of plant breeding in all the self-pollinated crops and still continues to be so. This method has been first described by H. H. Lowe in 1927. This is the most widely used method to handle segregating generations following crosses between two parents to develop new cultivars combining desirable traits from both the parents. In this method, superior types are selected in successive segregating generations and a record is maintained of all parent-progeny relationships. The records help the breeder to advance only progeny lines with plants that exhibit genes for the desired traits. Selection begins in F2 generation where individual plants are selected which in judgment of breeder will produce the best progeny in F5/F6 when the selection is finally concluded. In F3 and F4 generations, many loci will have become homozygous and family characteristics begin to appear. By F5/F6 generation, most families are expected to be homozygous and uniform and hence selection within such families is no longer effective. 

A line homozygous at all loci, ordinarily obtained by successive self-fertilizations in plant breeding is called a pure line. This concept was proposed by Danish biologist, W.L. Johannsen in 1903 while conducting a series of selection experiments for seed weight in common bean, which is strictly self-pollinated species. This is applied in self-pollinated crops, like wheat, rice, pulses, several vegetable crops, namely, tomato, chilli, eggplant, okra, cucurbits, etc. This is also applied to develop inbred parental lines in maize and several other cross-pollinated crops. However, ultimately these parental lines are used in development of new hybrids. This could be summarized as follows:

• Lines that are genetically different may be successfully isolated from within a population of mixed genetic types.
• Any variation that occurs within a pure line is not heritable but due to environmental factors only. Consequently, as Johansen’s bean study showed, further selection within the line is not effective.

Mass selection is a form of selection in which individual plants are selected phenotypically and the next generation propagated from the aggregate of their seed. It is applicable to both self and cross-pollinated crops. The obvious first step in the improvement of self-pollinated variety is the elimination of undesirable types. This may be achieved by simply roguing them as the variety grows in the field. Sometimes, this is called as negative selection. Another approach is to tag desirable types and to harvest only those at maturity. This is called as positive selection. Either way, results are similar. The best plants in the variety are identified and bulked. A refinement of mass selection is to harvest the best plants separately and to grow them as pure lines for comparison. Only those pure lines that are similar and superior are bulked as an improvement of an established variety. 

Broadly and conceptually breeding methods can be classified into four groups. These are:

• Selection breeding
• Combination breeding
• Hybrid breeding
• Special breeding techniques

There are fluid transitions and similarities between the individual groups of breeding methods. Selection not only takes place in the group termed selection breeding but also in other groups. In breeding varieties by combination, new variation is generated by crossing genetically different parents followed by application of various selection methods and ultimately development of a new recombinant type pure-line. In hybrid breeding, inbred lines of different genetic constitution are produced by selfing, pair crossing and other methods and from these best lines are selected and new hybrids are developed. In addition, breeding methods can also be classified according to other criteria. For example, breeding methods have also been classified according to the manner of propagation of the varieties. These are:

Crop Domestication

Domestication can be loosely defined as the process of bringing of a wild species under the management of man. Domestication is the process by which genetic changes (or shifts) in wild plants are brought about through a selection process imposed by humans. Because of the role of humans, the process results in characteristics that are beneficial to humans but some that would be disadvantageous for plants in their natural habitats. It is an evolutionary process in which selection (both natural (frost tolerance) and artificial (large attractive fruits)) operates to change plants genetically, morphologically, and physiologically. 

To start with let the self-incompatibility be defined.

• Self-incompatibility is the mechanism by which plant can prevent selffertilization.
• Self-incompatibility is defined as inability of a plant producing functional gamete to achieve self-fertilization.
• Self-incompatibility is a genetically based mechanism which controls mating within angiosperm species by imposing a ‘barrier’ between pollination and fertilization.
• The term incompatibility is used to describe the failure of pollen tube to penetrate the full length of the style and to effect fertilization.

Male sterility is a condition in plants whereby the anthers or pollen are nonfunctional. The condition may manifest most commonly as absence of pollen or extreme scarcity of pollen, severe malformation or absence of flowers or stamens, or failure of pollen to dehisce. Just like self-incompatibility, male sterility enforces cross-pollination. Similarly, it can be exploited as a tool to eliminate the need for emasculation and for hybrid seed production on commercial scale in field and vegetable crops. There are three basic kinds of male sterility based on the origin of the abnormality related to functional pollen grain.

Hybrid vigor or heterosis is opposite and complementary to inbreeding depression (reduction in fitness as a direct result of inbreeding). In theory, the heterosis observed after crossing is expected to be equal to the depression upon inbreeding, considering a large number of crosses between lines derived from a single base population. In practice, plant breeders are interested in heterosis expressed by specific crosses between selected parents, or between populations that have no known common recent origin. Furthermore, because heterosis is subject to the interactions between genotype and environment, it is desirable to describe the heterosis of a particular hybrid line for a specific trait at a specific location or under specified environmental conditions.

Inbreeding

Inbreeding means the mating together of individuals that are related to each other by ancestry. This may be defined as any system of mating that will lead to an increase in homozygosity. Selfing is the most intense form of inbreeding which provides the most rapid approach to homozygosity. When selfing is not possible, full-sib and half-sib mating are used to do inbreeding. The progeny of selfed plant is symbolized by Sj and the selfed progeny of the Sj by S₂ and so on. Occasionally symbol  is used to designate selfed seed. The effects of inbreeding are as follows:

Random Mating

Random mating occurs when each female gamete has an equal chance of being fertilized by any male gamete of the same plant or with any other plant of the population and, furthermore, there is an equal chance for seed production. It is not possible to achieve true random mating in plant breeding because selection is involved. Consequently, it is more realistic to describe the system of mating as random mating with selection. Whereas true random mating does not change gene frequencies, existing variability in the population or genetic correlation between close relatives, random mating with selection changes gene frequencies and the mean of the population, with little or no effect on homozygosity, population variance, or genetic correlation between close relatives in a large population.

The response to selection (R) or selection advance or genetic gain is the difference between the mean phenotypic value of the offspring of the selected parents and the whole of the parental generation before selection. The response to selection is simply the change of population mean between generations following selection. Similarly, the selection differential (S) is the mean phenotypic value of the individuals selected as parents expressed as a deviation from the population mean (i.e., from the mean phenotypic value of all the individuals in the parental generation before selection). Response to selection is related to heritability by the following equation:

While dealing with polygenic traits and the continuous variation in plant breeding programs, it is important to know as to what extent the phenotype is decided by the genotype and to what extent by the environment. It is well known fact that what we observe i.e. phenotype is the result of genotype, environment and interaction between the genotype and the environment. The total variance is phenotypic variance or the variance of phenotypic values and various components of variance are as shown in Table 6.1.

Quantitative traits are governed by many genes or polygenes genes with small individual effects. They are often described by their gene action rather than by the number of genes by which they are governed. There are four types of gene action: additive, dominance, epistasis, and overdominance. Because gene effects do not always fall into clear-cut categories, and it should be pointed out that gene action is conceptually the same for major genes as well as minor genes, the essential difference being that the action of a minor gene is small and significantly influenced by the environment. A general way of distinguishing between these types of gene action based on interaction among alleles is as follows:

Qualitative characters are those characters which show discontinuous or discrete differences and are counted into different classes and there is no need to measure them. Typically speaking, characters studied by Mendel in garden pea whose results were published in 1966 as Mendel’s Law were the typical characters that fitted into this class of characters in those days. To recall, these characters were (i) tall vs dwarf plants, (ii) round vs wrinkled seeds, (iii) yellow vs green pods, (iv) violet vs white flowers, (v) flat pods vs constricted pods, (vi), green pods vs yellow pods and (vii) axial flowers vs terminal flowers. Mendel postulated “Factors” responsible for these differences and he could explain his results of F₂ in ratio of 3:1 while dealing with one trait at a time and 9:3:3:1 while dealing with two traits simultaneously and proposed (i) law of segregation and (ii) principles of independent assortment to explain these ratios. Later on the term “factor” was called as gene.

Gametogenesis

Male Gametogenesis: Male gametogenesis is the formation of male gametes and it occurs in the anthers. The end products of meiosis in higher plants are four microspores. Two mitotic divisions occur in microspores. The first division produces a tube nucleus and a generative nucleus. The second mitotic division occurs only in the generative nucleus resulting into production of two sperm cells (Fig. 3.1). The microspore is haploid (n) and develops into pollen grain in the anther, and the pollen grain further develops into a pollen tube on the stigma and in the style. The pollen tube, when it reaches the embryo sac is the fully developed male gametophyte and is trinucleate, two sperm cells and one tube nucleus.

Systematic scientific efforts to improve genetic potential of crops in India were initiated in 1905 at the Imperial/Indian Agricultural Research Institute. In 1929, with the establishment of the Indian Council of Agricultural Research (ICAR), several associated developments took place in the first half of the 20th century leading to establishment of several crop-based institutes (sugarcane, cotton, jute, rice, oilseeds, tobacco, potato) and multidisciplinary institutes such as the Indian Agricultural Research Institute (IARI), Central Arid Zone Research Institute (CAZRI), and Central Plantation Crops Research Institute (CPCRI). Additionally, a Project on Intensification of Regional Research in Cotton, Oilseeds and Millets (PIRRCOM) was implemented during 1950s with establishment of several research stations in different regions.

Several definitions of plant breeding have been put forward. All of these have a core component of the definition that is “the art and science of improving the heredity of plants for the benefit of the humankind” as mentioned by famous plant breeding teacher and a popular plant breeding text book author, J. M. Poehlman. N. I. Vavilov has defined plant breeding as “evolution directed by the will of the man”. The most modern definition of plant breeding by Bernardo (2002) is “plant breeding is the science, art, and business of improving plants for human benefit”. A few more definitions on these lines given by several other famous plant breeders are as follows.

Identification of Diseased Animals

Detection of compromised pigs necessitates awareness and fast decisions about treatment, transportation, and/or culling.

Walking the pens daily to observe the pigs will aid in the early identification of healthy and unwell pigs. Before unsettling a group of pigs, try to assess them from afar. This allows you to assess their behaviour.

Check the pens for down or lame animals, watch for increased activity around the water or feeders, and listen for coughing or sneezing. Inspect the ventilation system for improper or poorly managed air quality.

Then, enter the pen area quietly and study the pigs individually utilising B.E.S.T. Method. This acronym stands for:

• Body
• Eyes/Ears/Nose
• Skin/Hair-coat
• Temperament.

Pig Identification

Animal identification is very important aspect on any livestock farm. Some types of identity are merely temporary, dissipating after a few days. Temporary identification, such as a grease paint stick, can be used to identify certain pigs within a pen, such as when immunisation pigs.

Some forms of identification are more durable. Ear tags are commonly used. Some producers use plastic tags with numbers to help them identify individual pigs. Pigs, on the other hand, are inquisitive creatures who frequently consider a plastic tag on another pig as an intriguing toy. Plastic tags are commonly torn and misplaced as a result. Additionally, when the tag punctures the ear, pigs frequently develop an ear infection. Tiny metal tags may be used, but they are subject to the same long-term loss and infection problems.

The most lasting method of identification used by most manufacturers is ear notching. In this procedure, little notches are carved into the baby pigs’ ears right after birth using a small pair of v-shaped pliers. The notches represent numbers and will accompany the pig for the remainder of its life. Farmers may develop their own ear-notching system, but the universal ear notching system is the most widely used.

Pig Nutrition

Proper feed is necessary for development, body maintenance, and the production of meat and milk. When correctly prepared, one can use less expensive locally available feeds that are nutritionally sufficient. Pigs can be fed effectively with leftovers from a family’s kitchen. Pig nutritional needs can be divided into six sections. Examples include water, carbohydrates, fats, proteins, vitamins, and minerals.

Pigs are omnivorous, which means they can consume both meat and plants. Pigs’ digestive systems can also manage roughage-rich diets. Pig must drink plenty of clean, fresh water every day. Pigs will consume practically anything. They will consume grass and other plants. They can be kept in a safe field where they will consume all vegetation and grass. The pig will burrow into the ground and consume both the roots and the green parts of plants. A pig with a nose ring cannot root plants. Pigs will develop and fatten more quickly if fed concentrate feed. Grain meal that has been thoroughly pulverised is a good feed for pig.

Pigs can also be fed leftover veggies and scraps from the kitchen. Before feeding scraps to the pig, household scraps, especially those containing meat, must be well prepared. The pig requires constant access to fresh, clean water. Each day, a sow with young requires 20 to 30 litres of water.

The digestive mechanism of a pig is ideally adapted to full concentrate-based meals. The digestive organs are quite simple, with a continuous musculomembanous tube from the mouth to the anus. However, this system includes multiple sophisticated interaction functions.

Mouth

The mouth is necessary not only for food consumption, but also for first partial size reduction by grinding. While teeth are the major means of reducing meal size and increasing surface area, when feed is mixed with saliva, the first step in the chemical breakdown of food occurs. The three primary salivary glands are the parotid, mandibular, and sublingual glands. Saliva secretion is a reflex activity that occurs when there is food in the mouth. The amount of mucus in saliva is determined by the wetness or dryness of the meal consumed. As a result, on a dry diet, more saliva mucus is secreted, whereas on a moist diet, only enough is secreted to aid in swallowing. Amylase, the enzyme that hydrolyzes starch to maltose, is present in saliva in very low amounts. Salivary digestive enzymes provide a minor effect. Food is chewed and mixed with saliva before going to the stomach via the mouth, throat, and oesophagus. Oesophageal movement involves muscle peristalsis, or the contraction and relaxation of muscles to move food.

The house should provide adequate protection from direct sunlight and rain. Pigs are extremely sensitive to heat and cold. In rural locations, simple low-cost dwellings built with locally accessible materials are preferred. It is also possible to construct adaptable pens that may be used for all types of pigs. Adequate pig housing is critical for disease prevention, parasite control, and labour savings.

The vital points about the pig house are as follows:

• Build the shed on a dry and adequately raised site.
• Avoid locations that are flooded, swampy, or have a lot of rain.
• The shed’s side walls should be 4-5 feet tall, with the remaining height supported by GI pipes or wooden poles.
• Plastering the walls will make them damp proof.

The selection of individual animals from a group is very important in a livestock farming business. While creating a herd, every farmer should buy animals from a trustworthy disease-free herd and learn as much as they can about the animals. Once the herd is established, the selection of gilts and boars for replacement in the breeding herd should be based on type and performance. The following are important criteria to consider while creating a healthy sow herd:

• Size of litters
• Strength and vigour of litters
• Milking ability
• Temperament

Pigs are inherently prolific, and two farrowings per year under optimal management conditions should be planned. One boar must be kept for every ten sows for optimal fertility. Breed the animals at their most active heat cycle (12 to 24 hours of heat). After every 21 days, the sows come into heat. Proper feeding and handling promotes heat, which facilitates breeding and results in larger litter numbers. In addition to grains, there is fish meal, skim milk or butter milk feed can be administered 2-3 weeks before breeding to allow for a 200-300 gm/day increase in body weight. The normal gestation period for a sow is 112-115 days, and the usual litter size is 8-10 piglets. Larger litters with higher birth weights are produced by older sows.

To achieve maximum reproductive efficiency, animals recently introduced into the breeding herd should be closely monitored. Effective management results in an increase in the number of live farrowed and weaned pigs. The following boar management strategies will aid in increasing fertility.

Care and Management of Breeding Boar

• Boars should be fed at a level of energy that prevents excessive fat deposition. This approach should ensure that they are physically fit and sexually active.
• To fulfil the minimum daily recommended amount, nutrients other than energy need be delivered.
• Boars must be at least 7.5 months old and to be tested for reproductive health.

Successful artificial insemination (AI) is necessary to maximise productivity on any pig farm. There are two types of breeding methods viz. natural mating and artificial insemination. Natural mating involves mating with a boar of superior breed qualities. On the field, only a few farmers have their own boar, and they are employed without regard for genetic merit, breed, or superiority of boar. Only the best quality breeding boar available in the area should be used to produce better piglets with larger litter sizes. Artificial insemination involves artificially collecting sperm from a proven boar, evaluating it for perfection, and depositing it into the cervix of a receptive sow. Artificial means are used for both collection and insemination. This expertise offers an extraordinary opportunity for the genetic upgrading of the animal species to which it is applied. Furthermore, it provides the most cost-effective approach of preserving genetic diversity in a population.

Successful management strategies require an understanding of the pig reproductive system. Profitability in pig production farm is primarily limited by reproductive efficiency. Increasing reproductive efficiency lowers the cost of each pig sold. Increased pig marketing per female could reduce the number of sows required or increase the overall number of pigs marketed per year. Nonetheless, improving reproductive performance requires time. There are no quick fixes for enhancing reproductive performance. To improve the reproductive parameters of swine farms, sound management approaches and a rigorous genetic selection programme are required.

The indigenous pig has been the basis used for pig production for a long period of time. It is small in size. Improved breeds are now being used for grading up the form the basis for pig production in the rural areas. The majority of the pig population in India is of indigenous breeds though population of crossbred and exotic pigs increased by 12.7 percent from year 2003 to 2012. The exotic breed mainly comprises Hampshire, Large White York Shire, Duroc, Landrace, and Tamworth.

The issues that our country faces in ensuring nutritional security for its rapidly growing population necessitate an integrated strategy to domestic animal rearing. Of the various livestock species, pigs are the most likely source of meat production and the most capable feed converters after broiler chickens. It not only provides meat but also bristles and dung. Pig farming provides rural residents with job options and additional revenue to help them better their living conditions. It is critical to assist capital formation in the animal husbandry sector in order to boost farmer incomes. The following are the benefits of pig farming:

• The feed conversion efficiency of the pig is best possible. Except for broilers, pigs produce more live weight gain per kg of feed than any other class of meat-producing animals.
• The pig can transform a wide variety of feed stuffs, such as grains, forages, and broken feeds into valuable nutritious meat. Furthermore, the majority of these meals are not edible or pleasing to humans.

Pig farming is considered as a beneficial sector in India that provides avenues of fast economic growth for new entrepreneurs and socioeconomically weaker sections, due to high fecundity rate, better-feed conversion efficiency, early maturity, small generation interval, and minimum investment on housing and equipment. Pig farming has evolved into a semi-commercial enterprise using intensive farming practises, in addition to being reared through free range management. Pig farming provides money to rural impoverished people from the lowest socioeconomic strata. As a result, effective programmes to popularise technological pig rearing of meat producing animals with enough financial supplies are required to modernise the Indian pig business and advance the productivity of small sized rural pig farms. 

1. Proteins in solution absorb ultraviolet light with absorbance maxima at 280 and 200 nm. Amino acids with aromatic rings are the primary reason for the absorbance peak at 280 nm. Peptide bonds are primarily responsible for the peak at 200 nm.
2. Aromatic amino acids tyrosine and tryptophan give proteins their characteristic ultraviolet (UV) absorption at 280 nm, which is routinely used to estimate protein concentration. Phenylalanine and disulfide bonds also contribute to absorption at 280 nm, albeit slightly.

Safe Food means

• It is not injurious to health
• It does not contain any filthy, rotten, decomposed or diseased animal
• substance or vegetable substance
• It is produced undermost hygienic conditions to produce/manufacture it, inferior or cheaper ingredients/raw materials are not used
• Food additives/processing aids used are permitted and are within prescribed limits.
• It is not misbranded

1. Ethyl alcohol content in alcoholic beverages is determined by Pyknometer Method or SG (Hydrometer) Method (after distillation). %Alcohol (v/v) = 8610.6 – (16584 x SG) + (7973.3 x SG 2)
2. 1 ml of 0.05N NaOH is equivalent to 0.00375 g of tartaric acid.
3. Volatile acidity of alcohol drinks is measured in terms of as acetic acid. 1 ml. of 0.05N NaOH is equivalent to 0.003g of acetic acid.
4. Esters in alcohol drinks is expressed as ethyl acetate gms. per 100 liters of abs. alcohol. 1 ml. of 0.1N NaOH is equivalent to 0.0088g of Ethyl acetate.
5. Esters in Higher alcohol drinks is expressed as Amyl alcohol gms. per 100 liters of abs. alcohol.1 ml of 0.1N NaOH is equivalent to 0.0088g of Amyl alcohol.
6. The concentration of Higher alcohol g/100L is determined by spectrophotometer method using p-dimethylaminobenzaldehyde solution by reading the % T or Absorbance (OD) of developed colour of samples and series of standards in spectrophotometer at 530/535 nm against reagent blank as reference.

1. Natural Mineral Water- Food Safety & Standard Regulations - 2011 and IS 13428:2005 Reaff. 2009 requirements
2. Packaged Drinking Water other than Natural Mineral Water- Food Safety & Standard Regulations - 2011 and IS 14543:2004 Reaff. 2009 requirements
3. Water for processed Food Industry- IS 4251 : 1967 Reaff. 1992 requirements
4. Drinking water- IS 10500 : 2012