eChapters

Delineating species boundaries correctly and also identifying species are crucial to the discovery of life’s diversity because it determines whether different individual organisms are members of the same entity or not (Dayrat, 2005). The identification of species depends on the knowledge held by taxonomists whose work cannot cover all taxon identification requested by non-specialists. To deal with these difficulties, the ‘DNA Barcode of Life’ project aims to develop a standardized, rapid and inexpensive species identification method accessible to non-taxonomists.

DNA barcoding is a technique in which species identification is performed by determining and comparing the sequences of several hundred base pairs of nucleotides from a small fragment of an identified gene, with the aim of contributing to a wide range of ecological and conservation studies in which traditional taxonomic identification is not practical (Krishnamurthy and Francis, 2012). The two main ambitions of DNA barcoding are to assign unknown specimens to species and to enhance the discovery of new species and facilitate identification, particularly in cryptic, microscopic and other organisms with complex or inaccessible morphology (Hebert et al., 2003a). Apart from these, identification of species previously defined by other criteria to also is an objective of barcoding. Another major objective could be the definition of operational units for ecological studies. This may also be used for forensic purposes by linking the specimens with already identified databases.

Agroforestry is a new name for a set of old practices. The farmers have been practicing agroforestry since ancient times. The general concept of agroforestry is to integrate trees and agriculture so as to create a more diversified landscape, while providing the producers with new environmental and economic benefits. In other words, agroforestry is a method of farming that allows trees and shrubs to grow along with crops and/or livestock, therefore blending agriculture and forestry in the same production system. In fact, man’s association with forest is much older than with agriculture. First man was a food gatherer and hunter in forests. Then he realized that the seeds of the fruits he collected germinated, grew into plants and bore the fruits again and thus man started to cultivate foods. Man’s desire to live in a community created settled agriculture.

Palmyra (Borassus flabellifer L.) is a tropical dioecious palm adapted to arid zone tracts. Though it is a versatile plant which yields many edible and non-edible products it is a less exploited species. It is used for sap, fruit, seed, leaf and fiber and timber products. From nutritional point of view, fruit pulp and seed shoot flour are the most important.Successful promotion of these as foods for general consumption depends on subjecting the fruit pulp to a debittering process, and the seed shoot flour, to initial detoxification processes (Thabrew and Jansz, 2004). Palmyra palms are the most numerous palms in the world after coconut palm (Fox, 1977). Despite this, they are the least studied of all the palms.

A forest is a large area dominated by trees. Many definitions of forest are used throughout the world, incorporating factors such as tree density, tree height, land use, legal standing and ecological function. Although a forest is usually defined by the presence of trees, under many definitions an area completely lacking trees may still be considered a forest if it grew trees in the past, will grow trees in the future, or was legally designated as a forest regardless of vegetation type.According to the Food andAgriculture Organization definition, forests covered 4 billion hectares or approximately 30% of the world’s land area in 2006. Forests are the dominant terrestrial ecosystem of earth, and are distributed around the globe. Forests account for 75% of the  gross primary production  of the earth’s  biosphere, and contain 80% of the earth’s plant biomass.

Introduction

Agriculture has always been linked with prosperity, man power and the ability to feed and raise human population. In earlier times, humans as man power were deployed on the fields to do all the necessary operations to cultivate the crops, but during the industrial revolution, with development of different farm machines the uses of human labor on the fields were drastically decreased. Further, with advancement of technologies and more availability of computers, Artificial Technology (AI) has been gaining momentum in recent years.

AI has the potential to transform the agricultural sector through cost reduction and increased crop yields, and minimizing environmental impacts. AI can help farmers better manage their land, improve crop quality, and increase their productivity In addition, AI can be used to monitor and analyze the health of crops, livestocks, and soils to identify issues and assist in their resolution. The primary idea of using artificial intelligence in agriculture is due its adaptability, superiority, and cost-viability. The customary techniques that were utilized by the farmers were not adequate enough to satisfy their necessities. (Khan et al. 2022) With the right implementation and technology, AI can be an invaluable tool to help farmers increase their efficiency and profitability. In today’s rapidly evolving world, where the demand for food continues to escalate amidst concerns over environmental sustainability and resource scarcity, Artificial intelligence (AI) has become a transformative force in agriculture, from optimizing crop production and resource management to enhancing decision-making processes. Globally, AI is changing how we approach farming techniques.

8.1 Working Capital Management – I

Working Capital Management: Working capital is a measure of firm’s efficiency and its current financial health. Managing the operational capital is called as working capital management.

Every firm has short term assets and short term liabilities, they are also known as current assets and liabilities. It is calculated by subtracting short term liabilities from short term assets. The working capital ratio determines if the firm is financially stable, and has enough short term assets to cover its short term debts.

Working capital management ensures that the company has enough monetary liquidity to meet short term debts. Structuring an effective working capital management is a great way to enhance the income. Ratio analysis and management of individual components of working capital are two primary importance of working capital management.

Ratio analysis: Process of determining and analyzing numerical relationships in accordance to financial statements like balance sheets, income statements and cash inflow statements is known as ratio analysis. The primary purpose of ratio analysis is to appraise the operating and financial performance of an economic activity and determine its efficiency, profitability, liquidity and solvency. It also helps in getting a brief idea about comparative valuation by comparing ratios of different companies in the same sector.

Inventory Management: Inventory management involves overseeing the purchase of new items and managing the existing ones. It aims to create such a purchase plan that will ensure effective delivery of materials. Two most used inventory management strategies are ‘the just-in-time method’ and ‘material required planning.’ In former one the firm plans to receive items at the time of need rather than maintaining high inventory levels, and the latter one is based sales forecasts.

Cash Management: Cash management is process of collecting, managing and utilizing the cash inflow to optimize the short term financial stability. The key component in accomplishing this task is solvency. Successful cash management is useful when any unexpected demand for cash occurs out of the blue.

1. INTRODUCTION

The paradigm of world’s livelihood is built on the basic foundation of natural resources which includes humans, plants, animals, soils and minerals, water and air. But the very livelihood of these resources are at stake because they are strongly linked and dependant on each other. And to add, the material resource namely ‘economy’ has invaded the tranquil habitat and life of the community of natural resources. Thus the present crisis is challenging livelihood of each of these natural resources whether it is human, plant or water or earth and the element of economy is interfering with the natural recourse of human depending on water and soil; and human, plant, animal together are depending on soil, water and air. But when the livelihood of soil, water and air is at stake how human, plant and animal can survive; hence the design of livelihood of world has the essential ingredients of all natural resources.

We humans are selfish and concerned about our livelihood security only and try to over-exploit other natural resources and assumed themselves as the master of all natural resources. Practically, there is war going on between and among natural resources. The world could be better if each natural resource has its own right with prospects to safeguard its livelihood and all resources together with better livelihood could offer the lively world.

2. UTILIZATION OF NATURAL RESOURCES

We should underscore that none of the natural resources are in ‘plenty’ and that we should ‘economize’ on each natural resource to build together the world’s livelihood. The food security of humans can not be attained without plants and plant security can nor be achieved without soil and water and it is impossible to keep secured soil and water without economics of management.

In short, the livelihood security of humans is entirely dependant on all other natural resources coupled with the material resource economy. It is incumbent on us to initiate appropriate steps from gross root to policy levels to make the world better.

A ‘system’ is a set of interrelated, interacting and interdependent elements operating together for a common purpose and capable of reacting as a whole to external forces. It is unaffected directly by its own output and it has a specified external boundary based on the inclusion of all significant feedbacks. A ‘farm’ is a system because several activities are closely related to each other by the common use of the farm labour, land and capital, by risk distribution and by the joint use of the farmer’s management capacity.

The foundation of modern insect classification was laid by Brauer in 1885. According to Brauer insects were classified as Subclass: Apterygogenea (pterous) and Pterygogenea (winged) based on:

• Presence or absence of wings.

• Mouthparts.

• Metamorphosis.

• Number of Malpighian tubules.

• The nature of wings.

• Thoracic segments etc.

The earliest classification of insects was based on habits and habitats and on certain gross anatomical features that define the general aspects of different kinds. In classifying insects, not only anatomical characters but also facts pertaining to physiology, biology, distribution, ecology and sometime cytology of the species is taken into consideration.

Dragon fruit, commonly known as pitaya/pitahya (Hylocereus sp.) is a  climbing perennial cacti belonging to the Cactaceae family and the subfamily Cactoidea of the tribe Cactea (Raveh et al., 1993). It is a perennial climbing cactus plant native to tropical areas of North, Central and South America. Main countries growing dragon fruit are Vietnam, Colombia, Mexico, Costa Rica, Nicaragua, Thailand and Taiwan. Cultivation also occurs in Australia, Israel and Reunion Island. The European Union and Asia, especially China are the largest import markets of dragon fruits (Vinas et al., 2012).

Increase in ambient temperature, drought, rainfall, desert, feed and fodder scarcity, water scarcity and other climatic stresses are very common to tropical climatic conditions. The animals living in tropical climate have to undergo some modification for their survival under such extreme conditions. Interestingly, higher percentage of livestock is found in tropical and sub-tropical regions of the world. These areas are rich in animal resources. There are several descriptive and non-descriptive breeds of bovine distributed in different agro-climatic conditions of India. They possess several traits which make them adaptive to such climatic conditions. Identifying those traits and propagation of such traits is beneficial in near future in respect of climate change scenario. Climate change is the major concern for the improvement and sustainability of livestock under tropical climatic conditions. The rising of temperature and humidity is one of the major threats to animal’s productive performance that leads to great economic losses. Upadhyay et al. (2009) estimated 2% loss of milk production due to thermal stress in India. It has also been expected that 3.2 million tons reduction by 2020 and more than 15 million tons by 2050. The decline in milk production reported to be higher in crossbreds (0.63%) followed by buffaloes (0.5%) and indigenous cattle (0.4%) (Upadhyay et al., 2009). 

• The thorax is the organ of locomotion due to articulation of wings and legs and is connected with the by neck or cervix.

• Thoracic segments are made up of three sclerites namely, dorsal body plate tergum or nota, ventral body plate sternum and lateral plate pleuron.

• Second and middle tagma which is three segmented, namely prothorax, mesothorax and metathorax. Meso and metathorax which bear wings are called as Pterothorax.

• In the apterygote insects the three thoracic segments are similar in size and structure. In the pterygote insects the thorax is highly modified.

• The prothorax is quite large and is somewhat independent of the other segments. The large shield that covers the dorsal and lateral sides of the prothorax is the pronotum.

• The pronotum is the dorsal sclerite of the prothorax, which can be highly modified in various orders such as the Hemiptera, Blattaria, and Coleoptera. E.g undivided and Saddle shaped in grass hopper, Shield like in cockroach.

• Cockroaches have pronotums that extend forward over the head.

• Scarab beetles and other beetles may also have unusual pronotums.

• Treehoppers have some of the most bizarre pronotums of all insects.

An agrometeorological observatory or station is a place where all the necessary instruments and structures are installed and maintained to observe and record the weather parameters at stipulated time interval.

Table 15.1. Instruments used for measuring weather parameters in observatories and laboratories

1. Introduction

Livestock meat and fish are rich sources of high-quality protein and other valuable nutrients such as polyunsaturated fatty acids, vitamins, and minerals and are an essential part of our healthy diet (Vladau et al., 2008; Mahmud et al., 2018; Mohanti et al., 2019; Mei et al., 2019). Food fraud and adulteration is an age-old distortive practice. The rising incidence of food contaminants and adulterants-induced health issues has challenged consumers to identify and consume safe livestock meat and fish products. Its significance has increased in recent years due to global trade, awareness among consumers, and sociopolitical issues.

Introduction

Biological nitrogen fixation (BNF), generally found in legumes, is a valuable nature’s gift through which atmospheric nitrogen is fixed by symbiotically associated rhizobia that make it available to plants. Among cereals, rice (Oryza sativa) is an important staple food crop that feeds a large proportion of the world population [1]. There is tremendous pressure on agriculturists worldwide to increase the yield to meet growing consumption to feed a world population increasing day by day. However, unlike symbiotic plant–microbe interactions commonly observed in legumes, in several cereal crop plants including Oryza sativa, endophytic associations have been observed [2-8].

The Green Revolution started in the early 1960s that led to the attainment of self-sufficiency in food grain production. This has been considered as the greatest agricultural transformation in the history of humankind. The Green Revolution contributed to widespread poverty reduction, averted hunger for millions of people, and avoided the conversion of thousands of hectares of land into agricultural cultivation.

Spices are defined as a strongly flavored or aromatic substance of vegetable origin, obtained from tropical plants, commonly used as a condiment. India is known as ‘land of spices’. Chilli (Capsicum annuum L.) also known as hot peppers and Capsicums also referred as bell peppers or sweet peppers belong to the genus Capsicum which is a member of the Solanaceae family. The native home of chilli is considered to New Mexico with secondary origin at Guatemala. They are known from pre-historic remains of Peru. Chilli was introduced into India by Portuguese in 16th century. Chilli is considered as one of the major commercial crops of the world. Both green and dried chillies are the important components of our routine diet. Chilli also contains vitamin A, C and E. It will give the required pungency, colour, taste and flavour to our dishes. The presence of capsaicin in chilli is responsible for its pungency and it has medicinal value. The extracted capsaicin is used in pain balms, cosmetics and medicines related to heart diseases. Capsanthin, a pigment in chilli is used for natural colouration to Jams, Jellies and squashes, since it is a natural pigment and no harmful or side effects on human health. Oleoresin is used in pain balms, vapours, etc. Hence, there is lot of demand for chilli oleoresin in the world market. The largest producer of chillies in the world is India contributing 52 per cent of world production, accounting for 11.67 lakh tonnes of production from an area of 7.5 lakh ha with 1550 kg/ha of productivity followed by Nigeria (17%), China (16%), Peru and Bangladesh (6%). India exported 1.8 million tonnes of chilli during 2009 (Reddy, 2010).

1. Introduction

Extrusion of foods is an emerging technology for the food industries to process and market a large number of products of varying size, shape, texture and taste. Extrusion cooking of cereals is becoming more adaptive due to its various advantages over the traditional food processing techniques (White, 1994). Nowadays the extrusion of food is of major importance in the food-processing sector and it is the only process, which covers a wide range of food products such as ready to eat (RTE) breakfast cereals, snack foods, baby foods etc. Elaborate scientific research, technological development and engineering design, which have been done in this field so far, have led to large-scale industrial production. 

Borer pests cause significant yield losses and are one of the most serious production constraints in tropical vegetable production. For instance, eggplant fruit and shoot borer (EFSB), Leucinodes orbonalis Guenée (Lepidoptera: Pyralidae) reduces yield as much as 70% (Dhandapani et al., 2003). Tomato fruit borer, Helicoverpa armigera Hubner (Lepidoptera: Noctuidae) causes about 5 to 55% loss in almost all the tomato producing areas in the world (Kashyap and Batra, 1987). Up to 80% yield losses have been reported in various vegetable and grain legumes due to legume pod borer (LPB), Maruca vitrata F. (Lepidoptera: Pyralidae) damage (Singh et al., 1990; Sharma, 1998; Gressel et al., 2004; Hammig et al., 2008; Zahid et al., 2008). Due to higher yield losses, growers tend to apply extremely high quantities of chemical pesticides to control borer pests on vegetable crops. Because the borer larvae are exposed on external plant parts only for a brief time after hatching, the window for effective pesticide application is very brief; vegetable farmers spray throughout the growing season, but without satisfactory results. A survey of pesticide use in Bangladesh indicated that farmers spray up to 180 times with chemical insecticides during a year to protect their eggplant crop against EFSB (SUSVEGAsia, 2007). Pesticide application often exceeded 50 sprays per tomato crop season in south India (Nagaraju et al., 2002). In Bangladesh, country bean (Lablab purpureus) is being sprayed at weekly or biweekly intervals—sometimes every day—to control LPB (Hoque et al., 2001). On average, farmers used 10-24 kg/ha of pesticides in cabbage and cauliflower in India to manage the diamondback moth, Plutella xylostella (Lepidoptera: Plutellidae) and other pests (Weinberger and Srinivasan, 2009).

Abstract

Seed is the most important input component for productive forestry. Large quantities of quality seed are needed every year to raise the nursery stock for propagating the desired plant species.  Commercially important species like Dalbergia sissoo, Eucalyptus tereticornis, Pinus roxburghii and Populus deltoides have become more important. Superior genetic qualities of seed have profound positive impact on growth rates and productivity of plantations and quality of the produce. To save and multiply the entire lot of valuable forest plants it is very essential to preserve and multiply those plants for which special type of nurseries are to be established. There is necessity to have special techniques and methods to meet the demand of seed and only hi-tech nurseries can satisfy this type of demand.