eChapters

1. Ethyl alcohol content in alcoholic beverages is determined by Pyknometer Method or SG (Hydrometer) Method (after distillation). %Alcohol (v/v) = 8610.6 – (16584 x SG) + (7973.3 x SG 2)
2. 1 ml of 0.05N NaOH is equivalent to 0.00375 g of tartaric acid.
3. Volatile acidity of alcohol drinks is measured in terms of as acetic acid. 1 ml. of 0.05N NaOH is equivalent to 0.003g of acetic acid.
4. Esters in alcohol drinks is expressed as ethyl acetate gms. per 100 liters of abs. alcohol. 1 ml. of 0.1N NaOH is equivalent to 0.0088g of Ethyl acetate.
5. Esters in Higher alcohol drinks is expressed as Amyl alcohol gms. per 100 liters of abs. alcohol.1 ml of 0.1N NaOH is equivalent to 0.0088g of Amyl alcohol.
6. The concentration of Higher alcohol g/100L is determined by spectrophotometer method using p-dimethylaminobenzaldehyde solution by reading the % T or Absorbance (OD) of developed colour of samples and series of standards in spectrophotometer at 530/535 nm against reagent blank as reference.

Safe Food means

• It is not injurious to health
• It does not contain any filthy, rotten, decomposed or diseased animal
• substance or vegetable substance
• It is produced undermost hygienic conditions to produce/manufacture it, inferior or cheaper ingredients/raw materials are not used
• Food additives/processing aids used are permitted and are within prescribed limits.
• It is not misbranded

1. Proteins in solution absorb ultraviolet light with absorbance maxima at 280 and 200 nm. Amino acids with aromatic rings are the primary reason for the absorbance peak at 280 nm. Peptide bonds are primarily responsible for the peak at 200 nm.
2. Aromatic amino acids tyrosine and tryptophan give proteins their characteristic ultraviolet (UV) absorption at 280 nm, which is routinely used to estimate protein concentration. Phenylalanine and disulfide bonds also contribute to absorption at 280 nm, albeit slightly.

Several definitions of plant breeding have been put forward. All of these have a core component of the definition that is “the art and science of improving the heredity of plants for the benefit of the humankind” as mentioned by famous plant breeding teacher and a popular plant breeding text book author, J. M. Poehlman. N. I. Vavilov has defined plant breeding as “evolution directed by the will of the man”. The most modern definition of plant breeding by Bernardo (2002) is “plant breeding is the science, art, and business of improving plants for human benefit”. A few more definitions on these lines given by several other famous plant breeders are as follows.

Systematic scientific efforts to improve genetic potential of crops in India were initiated in 1905 at the Imperial/Indian Agricultural Research Institute. In 1929, with the establishment of the Indian Council of Agricultural Research (ICAR), several associated developments took place in the first half of the 20th century leading to establishment of several crop-based institutes (sugarcane, cotton, jute, rice, oilseeds, tobacco, potato) and multidisciplinary institutes such as the Indian Agricultural Research Institute (IARI), Central Arid Zone Research Institute (CAZRI), and Central Plantation Crops Research Institute (CPCRI). Additionally, a Project on Intensification of Regional Research in Cotton, Oilseeds and Millets (PIRRCOM) was implemented during 1950s with establishment of several research stations in different regions.

Gametogenesis

Male Gametogenesis: Male gametogenesis is the formation of male gametes and it occurs in the anthers. The end products of meiosis in higher plants are four microspores. Two mitotic divisions occur in microspores. The first division produces a tube nucleus and a generative nucleus. The second mitotic division occurs only in the generative nucleus resulting into production of two sperm cells (Fig. 3.1). The microspore is haploid (n) and develops into pollen grain in the anther, and the pollen grain further develops into a pollen tube on the stigma and in the style. The pollen tube, when it reaches the embryo sac is the fully developed male gametophyte and is trinucleate, two sperm cells and one tube nucleus.

Qualitative characters are those characters which show discontinuous or discrete differences and are counted into different classes and there is no need to measure them. Typically speaking, characters studied by Mendel in garden pea whose results were published in 1966 as Mendel’s Law were the typical characters that fitted into this class of characters in those days. To recall, these characters were (i) tall vs dwarf plants, (ii) round vs wrinkled seeds, (iii) yellow vs green pods, (iv) violet vs white flowers, (v) flat pods vs constricted pods, (vi), green pods vs yellow pods and (vii) axial flowers vs terminal flowers. Mendel postulated “Factors” responsible for these differences and he could explain his results of F₂ in ratio of 3:1 while dealing with one trait at a time and 9:3:3:1 while dealing with two traits simultaneously and proposed (i) law of segregation and (ii) principles of independent assortment to explain these ratios. Later on the term “factor” was called as gene.

Quantitative traits are governed by many genes or polygenes genes with small individual effects. They are often described by their gene action rather than by the number of genes by which they are governed. There are four types of gene action: additive, dominance, epistasis, and overdominance. Because gene effects do not always fall into clear-cut categories, and it should be pointed out that gene action is conceptually the same for major genes as well as minor genes, the essential difference being that the action of a minor gene is small and significantly influenced by the environment. A general way of distinguishing between these types of gene action based on interaction among alleles is as follows:

While dealing with polygenic traits and the continuous variation in plant breeding programs, it is important to know as to what extent the phenotype is decided by the genotype and to what extent by the environment. It is well known fact that what we observe i.e. phenotype is the result of genotype, environment and interaction between the genotype and the environment. The total variance is phenotypic variance or the variance of phenotypic values and various components of variance are as shown in Table 6.1.

The response to selection (R) or selection advance or genetic gain is the difference between the mean phenotypic value of the offspring of the selected parents and the whole of the parental generation before selection. The response to selection is simply the change of population mean between generations following selection. Similarly, the selection differential (S) is the mean phenotypic value of the individuals selected as parents expressed as a deviation from the population mean (i.e., from the mean phenotypic value of all the individuals in the parental generation before selection). Response to selection is related to heritability by the following equation:

Random Mating

Random mating occurs when each female gamete has an equal chance of being fertilized by any male gamete of the same plant or with any other plant of the population and, furthermore, there is an equal chance for seed production. It is not possible to achieve true random mating in plant breeding because selection is involved. Consequently, it is more realistic to describe the system of mating as random mating with selection. Whereas true random mating does not change gene frequencies, existing variability in the population or genetic correlation between close relatives, random mating with selection changes gene frequencies and the mean of the population, with little or no effect on homozygosity, population variance, or genetic correlation between close relatives in a large population.

Inbreeding

Inbreeding means the mating together of individuals that are related to each other by ancestry. This may be defined as any system of mating that will lead to an increase in homozygosity. Selfing is the most intense form of inbreeding which provides the most rapid approach to homozygosity. When selfing is not possible, full-sib and half-sib mating are used to do inbreeding. The progeny of selfed plant is symbolized by Sj and the selfed progeny of the Sj by S₂ and so on. Occasionally symbol  is used to designate selfed seed. The effects of inbreeding are as follows:

Hybrid vigor or heterosis is opposite and complementary to inbreeding depression (reduction in fitness as a direct result of inbreeding). In theory, the heterosis observed after crossing is expected to be equal to the depression upon inbreeding, considering a large number of crosses between lines derived from a single base population. In practice, plant breeders are interested in heterosis expressed by specific crosses between selected parents, or between populations that have no known common recent origin. Furthermore, because heterosis is subject to the interactions between genotype and environment, it is desirable to describe the heterosis of a particular hybrid line for a specific trait at a specific location or under specified environmental conditions.

Male sterility is a condition in plants whereby the anthers or pollen are nonfunctional. The condition may manifest most commonly as absence of pollen or extreme scarcity of pollen, severe malformation or absence of flowers or stamens, or failure of pollen to dehisce. Just like self-incompatibility, male sterility enforces cross-pollination. Similarly, it can be exploited as a tool to eliminate the need for emasculation and for hybrid seed production on commercial scale in field and vegetable crops. There are three basic kinds of male sterility based on the origin of the abnormality related to functional pollen grain.

To start with let the self-incompatibility be defined.

• Self-incompatibility is the mechanism by which plant can prevent selffertilization.
• Self-incompatibility is defined as inability of a plant producing functional gamete to achieve self-fertilization.
• Self-incompatibility is a genetically based mechanism which controls mating within angiosperm species by imposing a ‘barrier’ between pollination and fertilization.
• The term incompatibility is used to describe the failure of pollen tube to penetrate the full length of the style and to effect fertilization.

Crop Domestication

Domestication can be loosely defined as the process of bringing of a wild species under the management of man. Domestication is the process by which genetic changes (or shifts) in wild plants are brought about through a selection process imposed by humans. Because of the role of humans, the process results in characteristics that are beneficial to humans but some that would be disadvantageous for plants in their natural habitats. It is an evolutionary process in which selection (both natural (frost tolerance) and artificial (large attractive fruits)) operates to change plants genetically, morphologically, and physiologically. 

Broadly and conceptually breeding methods can be classified into four groups. These are:

• Selection breeding
• Combination breeding
• Hybrid breeding
• Special breeding techniques

There are fluid transitions and similarities between the individual groups of breeding methods. Selection not only takes place in the group termed selection breeding but also in other groups. In breeding varieties by combination, new variation is generated by crossing genetically different parents followed by application of various selection methods and ultimately development of a new recombinant type pure-line. In hybrid breeding, inbred lines of different genetic constitution are produced by selfing, pair crossing and other methods and from these best lines are selected and new hybrids are developed. In addition, breeding methods can also be classified according to other criteria. For example, breeding methods have also been classified according to the manner of propagation of the varieties. These are:

Mass selection is a form of selection in which individual plants are selected phenotypically and the next generation propagated from the aggregate of their seed. It is applicable to both self and cross-pollinated crops. The obvious first step in the improvement of self-pollinated variety is the elimination of undesirable types. This may be achieved by simply roguing them as the variety grows in the field. Sometimes, this is called as negative selection. Another approach is to tag desirable types and to harvest only those at maturity. This is called as positive selection. Either way, results are similar. The best plants in the variety are identified and bulked. A refinement of mass selection is to harvest the best plants separately and to grow them as pure lines for comparison. Only those pure lines that are similar and superior are bulked as an improvement of an established variety. 

A line homozygous at all loci, ordinarily obtained by successive self-fertilizations in plant breeding is called a pure line. This concept was proposed by Danish biologist, W.L. Johannsen in 1903 while conducting a series of selection experiments for seed weight in common bean, which is strictly self-pollinated species. This is applied in self-pollinated crops, like wheat, rice, pulses, several vegetable crops, namely, tomato, chilli, eggplant, okra, cucurbits, etc. This is also applied to develop inbred parental lines in maize and several other cross-pollinated crops. However, ultimately these parental lines are used in development of new hybrids. This could be summarized as follows:

• Lines that are genetically different may be successfully isolated from within a population of mixed genetic types.
• Any variation that occurs within a pure line is not heritable but due to environmental factors only. Consequently, as Johansen’s bean study showed, further selection within the line is not effective.

Pedigree method of plant breeding is defined as a method of breeding in which individual plants are selected in the segregating generations from a cross on the basis of their desirability judged individually and on the basis of a pedigree record. This has been the most widely used method of plant breeding in all the self-pollinated crops and still continues to be so. This method has been first described by H. H. Lowe in 1927. This is the most widely used method to handle segregating generations following crosses between two parents to develop new cultivars combining desirable traits from both the parents. In this method, superior types are selected in successive segregating generations and a record is maintained of all parent-progeny relationships. The records help the breeder to advance only progeny lines with plants that exhibit genes for the desired traits. Selection begins in F2 generation where individual plants are selected which in judgment of breeder will produce the best progeny in F5/F6 when the selection is finally concluded. In F3 and F4 generations, many loci will have become homozygous and family characteristics begin to appear. By F5/F6 generation, most families are expected to be homozygous and uniform and hence selection within such families is no longer effective. 

Bulk population method of breeding is defined as the growing of genetically diverse populations of self-pollinated crops in a bulk plot with or without mass selection, followed by single plant selection. It is applicable to self-pollinated crops and not applied to cross-pollinated crops. Bulk population breeding is a strategy of crop improvement in which natural selection effect is solicited more directly in the early generations of the procedure by delaying stringent artificial selection until later generations. The Swede, H. Nilsson-Ehle, developed the procedure. H.V Harlan and colleagues provided additional theoretical foundation for this method through their work in barley breeding in 1940s. As proposed by Harlan and colleagues, the bulk method entails yield testing of the F2 bulk progenies from crosses and discarding whole crosses based on yield performance. In other words, the primary objective is to stratify crosses for selection of parents based on yield values. The current application of the bulk method has a different objective.

Single seed descent (SSD) method of breeding is applicable to self-pollinated crops. The method of single seed descent (SSD) was born out of a need to speed up the breeding programme by rapidly inbreeding a population prior to initiating individual plant selection and evaluation while reducing a loss of genotypes during the segregating generations. SSD procedure is based on advancing generations through single seed from each plant in each generation. This separates the inbreeding phase from the selection phase and the population reaches F6 generation faster. This procedure carries forward maximum number of F2 plants to a stage near homozygosity, i.e. F6. It was first proposed by C. H. Goulden in 1941 when he obtained the F6 generation in two years by reducing the number of generations grown from a plant to one or two while conducting multiple plantings per year using greenhouse and off-season planting. H. W. Johnson and R. L. Bernard described the procedure of harvesting a single seed per plant for soybean in 1962. However, it was C.A. Brim who, in 1966, provided a formal description of the procedure of single seed descent, calling it a modified pedigree method.

Backcross breeding is defined as system of breeding whereby recurrent backcrosses are made to one of the parents of a hybrid, accompanied by selection for a specific character or characters. It is basically applicable to self-pollinated crops and is precise way improving varieties that excel in large number of desirable attributes but lack in a few characteristics. This method makes use of a series of backcrosses to the variety to be improved during which character for which improvement is sought is maintained by selection. At the end of the backcrossing, the gene to be transferred remains in heterozygous condition and selfing after the last backcross produces homozygosity for the gene under transfer. As a result, the improved variety will remain like recurrent variety in terms of yield, adaptability, quality features, etc. will be superior for the character which was planned to be transferred from the donor parent.

The application of backcross breeding in plants was first proposed by H.V. Harlan and M.N. Pope in 1922. In principle, backcross breeding does not improve the genotype of the product, except for the substituted gene(s).

The term hybrid or hybrid variety is used to designate F1 populations that are used for commercial plantings. Such F1 populations are obtained by crossing clones, open-pollinated varieties, and inbred lines that are genetically dissimilar. Historically the first attempts to make practical use of fortunate mating system of maize came late in the nineteenth century by W. J. Beal in Michigan, stimulated by Darwin’s work on inbreeding and outcrossing. Beal suggested use of F1 varietal crosses to exploit heterosis for commercial crop. The hybrid seed was to be produced by detasseling alternate rows. It was George Harrison Shull (1909) who first suggested a pure line method of corn breeding based on inbred lines obtained by continued self-fertilization and the use of F1 hybrids between these inbred lines for the production of commercial crop. His proposal was to make use of single crosses (hybrids between two inbred lines) based on the superior performance of the hybrids in various combinations between the inbred lines.

A variety produced by crossing inter se a number of genotypes selected for good general combining ability in all hybrid combinations with subsequent maintenance of the variety by open-pollination. Synthetics development is common in cross- pollinated crops in the early phases of breeding. The synthetic method of breeding is suitable for improving cross-fertilized crops. It is widely used to breed forage species. Successful synthetic cultivars have been bred for corn, sugar beets, and other species like cauliflower in India. The suitability of forage species for this method of breeding stems from several biological factors. Forages have perfect flowers, making it difficult to produce hybrid seed for commercial use. The use of male sterility may facilitate controlled cross-pollination, which is difficult to achieve in most forage species. To test individual plants for use in producing the commercial seed, it is essential to obtain sufficient seed from these plants. The amount of seed obtained from single plants of these species is often inadequate for a progeny test. Furthermore, forage species often exhibit self-incompatibility, a condition that inhibits the production of selfed seed. Synthetic cultivars are also used as gene pools in breeding progeny. Synthetic cultivars are advantageous in agricultural production systems where farmers routinely save seed for planting. One of the well-known and widely used synthetic has been the Iowa stiff- stalk synthetic (BSSS) of maize.

Composites defined as advanced generation populations maintained by random mating in the material constituted through mixing of equal quantity of seeds of crosses showing less inbreeding depression in F2 over F1. The components of composites inbreds, open-pollinated populations, locally available open-pollinated cultivars, hybrids, advanced generation lines, improved populations. Mixing the seeds of several phenotypically outstanding lines produces a composite variety and encouraging open pollination to produce crosses in all combinations among, the mixed lines. The lines used to produce a composite variety are rarely or not tested for combining ability with each other like as done in case of synthetics where the combining ability of the component lines is invariably tested for GCA. Composite are commercial varieties and are maintained by open - pollination in isolation. While mixing the seeds of various genotypes, care should be taken that the component lines are similar in maturity height, seed size, colour, etc. so that the composite maintained through random mating in isolation manifests a reasonable degree of phenotypic uniformity. The variety is maintained by open pollination. Farmers can use their own seed for 3 to 4 years.

Recurrent selection is a method of breeding applicable to cross-pollinated crops, designed to concentrate favourable genes scattered among a number of individuals by selecting in each generation among the progeny produced by mating inter se of the selected individuals (or their selfed progeny) of the previous generation. The concept of recurrent selection grew out of need to increase the number of superior genotypes that could be obtained from breeding stock of corn. This could have been possible by increasing the frequency of superior genes in the gene pool and by increasing the chances for genetic recombination to occur. The original idea behind recurrent selection was proposed first by Hayes and Gerber in 1919 and independently by East and Jones in 1920. Jenkins (1940) was the first to describe the method in detail and Hull (1945) proposed the name ‘recurrent selection’. Each cycle of recurrent selection requires:

Mutation is defined as a sudden heritable change in gene or in chromosome structure. The process of hereditary change is termed mutation and the individuals affected by the change are called mutants. Besides recombinations, mutations are the cause of genetic variation from which every breeding activity proceeds. By means of mutations, the multiplicity of the types of a population is not only increased by one genotype, but also by large number of further new genotypes due to possibility of subsequent recombinations of mutant with the existing genotypes.

Any organism with other than two basic sets of chromosomes, that is, monoploid, triploid, tetraploid, and various aneuploids is termed as polyploid. There are several economically important crops which are natural polyploids emphasizing the economic importance of polyploids in agriculture. These are:

Triploid-Banana

Autotetraploid-Alfalfa, potato, coffee, peanut or groundnut Autohexaploid- Sweet potato

Amphidiploid/allopolyploid-Wheat, cotton, oats, Brassica species (B. carinata- Ethiopian mustard, B. juncea-Indian mustard, B. napus--rapeseed), sugarcane

Man-made commercially successful allopolyploid- Triticale

Reproduction by asexual means is common among higher plants. The best known means of asexual reproduction are by corms, bulbs, rhizomes, stolons, or other vegetative organs. Plants normally propagated in agricultural practice by these means or by budding or grafting include nearly all fruit and nut trees, strawberries, blackberries and raspberries, grapes, pineapples, almost all ornamental shrubs and trees and a few field crops such as sugar cane, potatoes, and sweet potatoes. Asexually or clonally propagated plants produce genetically identical progeny. Clones are identical copies of a genotype. Together, they are phenotypically homogeneous. However, individually, they are highly heterozygous and segregate widely upon sexual reproduction. This is not unexpected, because the types selected as commercial cultivars are likely to be vigorous ones, and a positive correlation exists between vigour and heterozygosity in most species.

Biotic stresses include diseases and insect pests which cause serious damage to the crop plants and ultimately yield loss. Biotic stresses can be listed as follows:

• Diseases caused by pathogens which include fungi, bacteria, and viruses
• Insects
• Nematodes
• Parasitic weeds

Another category of stresses are called as abiotic stresses which are caused by environmental factors as:

• Water stresses (water logging, drought)

Plant abiotic stresses are external and nonliving factors that have harmful effects on plants. A non-living factor must exert influence on the normal range of environmental variation to adversely and significantly affect the plant performance or the physiology of the organism. Abiotic stresses are the most harmful factors affecting the growth and productivity of crops worldwide, resulting in a yield reduction ranging from 10% to 100%. They are most harmful when occurring together with other abiotic stresses and their effect in yield will only worsen with the climatic changes experienced now and expected to be more severe in the future.

Plant breeding or crop plant improvement is one of the oldest accomplishments of man. It began when he domesticated plants by growing them under controlled conditions and selecting those types that suited to his food requirements, about 10,000 years ago. As settlements improved, men could find time to innovate agricultural practices and to have better selections. Thus, domestication of plants and animals marked one of the most important phases in man’s progress from a nomadic and highly individualistic life to the organized and cooperative society. All our food crops as we know them now are the direct results of this primitive agriculture. This early phase of plant breeding was haphazard and slow based on selection of desirable types from the availability variability and it largely remained an art and not a science until Mendel’s laws were rediscovered in 1900 and applied to plant breeding at the beginning of 19^th century. 

The practice of official release of cultivars in India started in October, 1964 with the formation of the Central Variety Release Committee (CVRC) at the Central government level and State Variety Release Committee at State Government level. The Central Variety Release Committee functioned up to 1969 when its functions were taken over by the Central Seed Committee (CSC) established under the Seeds Act, 1966. The Central Seed Committee later on bifurcated CVRC and constituted (i) a Central Sub-Committee on Crop Standards Notification and Release of Varieties for Agricultural Crops and (ii) a Central Sub-Committee on Crop Standards Notification and Release of Varieties for Horticultural Crops to discharge the functions of release/notification, provisional notification and de-notification of cultivars at Central level for field and horticultural crops respectively. State Seed Sub-Committees (SSSC) were asked to discharge similar functions for release at State level. Central Sub-Committee on Crop Standards, Notification and Release of Varieties for Agricultural Crops is responsible for release and notification of field crops. This committee is chaired by ICAR-Deputy Director General (Crop Science). The members are drawn from Directors/Crop Coordinators of ICAR, Directors Agriculture from States, Directors Seed Certification Agencies, Managing Directors of State Seed Corporations, Representatives from Private Seed Companies, etc. 

1.1 Introduction

Horticulture is defined as “The science and art of growing vegetables, fruits, flowers, ornamental plants and landscaping of gardens and surroundings in small and commercial gardens”. The Latin word “horticulture” comprises two parts: “hortus” (which means “garden”) and “cultura” (which means “cultivation”). In other words, horticulture is the nurturing of gardens. Pomology, olericulture, floriculture, and landscaping are the main aspects of horticulture. Horticulture is becoming more and more important since it produces greater output per unit of land and provides humans with nourishing food, improving their quality of life and enhancing the visual beauty of nature. Regarding the worth of the goods, one of the main branches of horticulture is vegetable growing.

Technically speaking, every component of a vegetable is edible. However, the phrase is typically used to refer to edible plants that include reserves of food in the form of roots, tubers, bulbs, stems, petioles, leaves, buds, flowers, fruits, and seeds that can be consumed either cooked or raw. Growing vegetables is crucial not only for supplying food that is protective but also for serving as a substantial auxiliary food that contributes more significantly to food consumption. They are vital parts of a balanced diet since they are nutrient-rich.

2.1 Introduction

Cabbage is consumed in the raw state as well as in cooked. The word cabbage has been derived from the French word Cobache, meaning head which is best described as single large terminal bud comprised of tightly overlapped numerous leaves attached to an unbranched short stem. It is known for its rich source of vitamin A and C. It is an effective curative against scurvy disease. Cabbage leaves are low in calories (24 %), fat (0.2 %) and carbohydrates (5.4 %). It is a good source of protein (1.3 %). Cabbage is an excellent source of minerals such as calcium, iron, magnesium, sodium, potassium and phosphorus. It contains good amount of ascorbic acid. Cabbage is used mainly as a vegetable and nice pickle (sauerkraut) is prepared from it. It is also used as salads. Cabbage is well known for its medicinal properties. 

3.1 Introduction

Cauliflower is a cruciferous vegetable that is naturally high in fibre and B-vitamins. It is said that the cauliflower has originated around the Mediterranean Sea. Ancestor of cauliflower is Brassica cretica which has been descended from the wild cliff cabbage, Brassica oleracea var. sylvestris, a native of coastal region of Europe and Africa. Cauliflower is cultivated worldwide in different climatic conditions ranging from temperate to tropics during most of the cropping seasons and is available round the year. Curd is the economic part of cauliflower and is an intermediate stage between vegetative and reproductive stage. It was introduced in India during the Mughal period. In 1822 a botanist Dr Jemson, In-charge of Company Bagh, Saharanpur, U.P introduced it in India from Kew Garden London. 

Common Name: Ganth gobhi or kadam

4.1 Introduction

Knol khol or kohlrabi is not very widely grown in our country except in Kashmir, West Bengal and some of the South Indian states. Kohlrabi is a herbaceous biennial grown for its edible stem. The edible part in kohlrabi is the tuber formed by the thickening of stem tissue above the cotyledons, i.e., swollen stem called knob or tuber. 

5.1 Introduction

Sprouting broccoli is believed to be the first to be originated from wild cabbage (Brassica oleracea var. sylvestris) or wild cliff cabbage which is found growing wild in southern Europe and along the eastern Mediterranean Sea. It is also known by several other names such as Calabrese or Italian Green because it was cultivated first in Italy by the ancient Romans and spread to other countries only from sixteenth century onwards. In India, it was introduced during the second half of the 20th century. The word broccoli is derived from the Latin word Brachium meaning an arm or branch. Broccoli contains higher amount of protein, vitamin A and C and appreciable quantities of thiamine, riboflavin, niacin, calcium and iron. 

6.1 Introduction

It is an important vegetable in European countries. It got its name from the capital city of Belgium since it has been grown around Brussels for hundreds of years. From Belgium it has been introduced to England (1810). Some parts of Long Island in New York are also well known for Brussels Sprout production. In India, it is widely grown in Kodai kanal and Nilgiris hills of Tamil Nadu and Maharashtra. Exact statistics regarding area, production and productivity are not available. It is a cool, moisture loving and frost resistant biennial, with axillary buds produced in the leaf axils during the first year of growth and a seed head is produced in the second year of growth. Edible part is swollen axillary bud (sprouts or buttons or mini cabbage). 

7.1 Introduction

Chinese cabbage appears to be native of China. It is known to have arisen from a cross between Pak choi (Brassica rapa var. chinensis, non-heading Chinese cabbage) from south China and turnip (Brassica rapa var. rapifera) from north China when they were grown together in the city of Young-chou. Artificial crosses between these species have proved this hypothesis. Its chromosome number 2n=20 distinguishes it from cole crops. It is not a member of cole group but regarded as very closely allied crop due to similarity in breeding systems, cultivation practices, season of growing and other features besides being like a member of Brassica vegetables. In general Pe-tsai cabbage, i.e., heading type (B. rapa subsp. pekinensis or B. pekinensis) and pak-choi cabbage, i.e., leafy type (B. rapa subsp. 

8.1 Introduction

Common onion, Allium cepa L., is a vegetable that is the most widely cultivated species of the genus Allium. It has been cultivated for more than 5000 years. However, its wild species do not exist. Allium is a Greek word. Onion is native of Central Asia. According to Vavilov onion originated in Pakistan, however, others opined it to have domesticated in the mountainous regions of Central Asia comprising Turkmenistan, Uzbekistan, Tajikistan, Afghanistan, Pakistan and north Iran. Jones and Mann proposed the area comprising Pakistan and Iran or South East Asia as the centre of origin. Onion is very important in cookery. 

9.1 Introduction

Garlic (Allium sativum L.) is one of the important bulb crops grown and used as a spice or condiment throughout India. It is derived from two words gar meaning spear and lic meaning herb. It is also important foreign exchange earner for the country. Garlic has higher nutritive value than other bulb crops. It is rich in proteins, phosphorous, potassium, calcium, magnesium and carbohydrates. Healthy garlic bulbs contain allicin, a colourless, odourless and water-soluble amino acid. On crushing the garlic bulbs, the enzyme allinase breaks down into allin to produce allicin of which the principal ingredient is odoriferous diallyl disulfide. Garlic contains about 0.1% volatile oil. 

10.1 Introduction

Leek is a non-bulb forming tetraploid plant of onion family. It belongs to monocotyledons group like onion and garlic, and has white narrow bulbs with broad leaves and etiolated pseudostem formed by the leaf sheaths. Except large size it looks like green onion. Its cultivation is not commercial in India and grown only in kitchen garden. Recently, its cultivation has been noticed in temperate regions of north India and the Niligiri hills of South India. Leek is cultivated for blanched stems and leaves. It is a hardy biennial plant, consumed as salad and used in flavouring the soups. It has flattened leaf blades rather than the radial, and it is bigger than onion. As compared to onion, it has milder and more delicate flavour. 

11.1 Introduction

The word Raphanus has been originated from Greek, meaning quick appearing, refers to its very rapid germination and growth characteristics. It is grown chiefly for its succulent and fleshy edible taproot eaten raw as salad or cooked. The leafy tops are very rich in vitamins A, B and C, and minerals particularly calcium and iron. Major sugar present in radish is glucose. It is a short duration crop and highly productive, so preferred as intercrop or in relay and sequential cropping. 

12.1 Introduction

Carrot is valued as a nutritive food mainly because of high carotene content. The edible part of carrot is modified root (conical form, i.e., enlarged fleshy taproot). Although carrot is a biennial crop but it is grown as an annual for its root. Black carrots (Asiatic carrot root) are used for the preparation of a soft beverage called Kanji, which is supposed to be a good appetizer. Red type is good for preparing various types of sweets especially Gajar Halwa in northern India. Carrot seed oil is used for flavouring liquors and commercially used in France. The taste of carrot is due to the presence of glutamic acid. In carrot roots sucrose is the most abundant than glucose and fructose. Maximum concentration of carotene is found 85-100 days after planting. Carrot seeds contain germination inhibitor named as carrotal.