eChapters

Genetic architecture of a population is the result of prolonged natural selection. The populations which exist in diverse environments might have been strongly diversified genetically. So, it is necessary to understand the extent and rates of genetic divergence existing between the diversified forms or types. Genetic diversity must be sufficient enough to justify breeding effort. Genetic diversity may be available in improved germplasm or it may exist only in genetically inferior stocks. The availability of statistical tools to quantitatively measure the genetic divergence between two or more populations and the relative contribution of individual characters to the total divergence have permitted to trace the evolutionary patterns in some crops such as rice and tobacco and in choosing the parents for hybridization in crop plants (Rao, 1958; Blackith, 1960; Morishima and Oka, 1960; Murthy et al.,1962). Among the several statistical methods developed for measuring the divergence between population, multivariate analysis (D² statistic) developed by Mahalanobis in 1936, has been found to be potent tool.

Mahalanobis D² analysis is an effective tool in quantifying the degree of divergence at genetic level and provides a quantitative measures of the association between geographic and genetic diversity based on generalized distance.

Rice (2n = 24) is an annual grass (family: Graminae) with terminal panicles bearing the grains. It originated in Asia between the fourth and fifth millennia B.C. A substantial portion of the people in south and Southeast Asia and the southern part of China are depending on rice as staple food (Chang, 1976). Rice is planted in the most diverse environmental conditions of any major food crop, from sea level to around 3000 m altitude and from 30°S to 49°N. Temperature and day lengths are therefore quite diverse in the rice growing areas. Rice is also grown under water regimes ranging from dry land to deepwater fields where water may reach 5 m depth. The wide geographical distribution of rice and its early history of cultivation have resulted in the development of a great diversity of varietal types (Vergara, 1985).

Rice has been used as food by man for over 10,000 years and has fed a great number of people for a longer period than has any other crop. “Rice is life” for almost four billion people of the world contributing over 20 per cent of the total caloric intake of human population (Chaudhary and Tran, 2001). Rice is cultivated in 113 countries and on all continents except Antarctica and it is the staple food for 17 countries in Asia and the pacific, eight countries in Africa, seven countries, in Latin America and the Caribbean and one in the near east (IRC, 2003).

Globally rice is grown in around 155 million ha occupying one tenth of arable land, with an annual production of 579 million tonnes of rough rice (Iiyas Ahmed, 2003). The average productivity of 3.89 t ha^-1 of rice provides a per capita. Consumption of 100 to 240 kg per year across the globe. Over 90 per cent of the world’s rice is produced and consumed in Asia and more than half of it from India and China exploiting maximum arable land. More than two billion people obtain their 80 per cent calorie from rice and its derived products from 90 per cent of world’s rice area (FAO, 1999). Rice based on production systems and their associated post harvest operations employ nearly a billion people in rural areas in developing countries (IRC, 2003).

In recent years, we are just experiencing marginal surplus production in cereals leading to self-sufficiency through green revolution. However, the shortage of production in edible oils has drawn the attention for the increased cultivation of oil seeds, and increased productivity per unit area to provide sustainable food and nutrition security (Swaminathan, 1989).

The importance of oil seeds cannot be over emphasized in the Indian economy. Oilseed occupied nearly 19 million hectares, next only to food grains, in 1986-1987. Yet, the domestic production in the country has lagged far behind the increasing demand for edible oils, necessitating a massive import of edible oils which lead to the drain of the valuable foreign exchange. The total import bill on edible oil has increased from 1.41 per cent in 1970-71 to 3.05 per cent in 1986-87. Even then, the annual per capita availability of edible oils registered only a nominal increased from 3.5 kg to 5.9 kg during the same period, against the nutritional norm of 14 kg (Suresh Pal, 1989). Due to the concerted efforts made through the ‘Technology Mission on Oilseeds’, oil seeds production reached a peak of 178.9 lakh tonnes during 1988-’89 in India (GOI, 1990a). This is an impressive achievement in Indian Agriculture, to reduce the bill on the import of edible oils from 4.11 per cent (1987-’88) to 2.58 per cent (1988-’89) (Gill, 1990). Further efforts in increasing oilseeds production definitely will go a long way in drastically reducing the present import bill.

Among the oilseed crop, sesame (Sesamum indicum L.), “The Queen of Oil Seeds”, is one of the important ancient and traditional crops occupying third position in terms of acreage on the oilseeds map of the country. It is commonly known as Gingelly, Til, Benniseed and Simsim. It is an important source of edible oil for the nutritional refugees of most part of the world, especially for India. The oil is rich in oleic and linoleic acid. In addition, it serves as a good source of proteins, vitamins and minerals (Nagaraj, 1990). Its high keeping quality deserves special mention.

Introduction

India is the largest producer of pulses in the world, both in quantity and variety. But, presently, India is one of the largest importer of pulses. India imported pulse grains upto a tune of approximately 4000 crore rupees during 2006-07. It accounts for about 20 per cent of the total import bill during 2006-07. This is because of the green revolution (quantum jump in cereal production) accompanied with changes in the infrastructures and incentives including input supplies and price support systems in favour of major cereals. It altered the traditional cropping pattern against pulses with decades of emphasis on research as well as production in superior cereals coupled with a near total neglect of the rainfed areas, pulses were driven out of not only the irrigated areas, but also the rainfed farming and were relegated to the marginal lands. Further more, the weak infrastructural support for input supply, credit and marketing in the rainfed areas, the traditional home of pulses, also adversely affected the prospects for pulses. A vicious circle of low input use and low output thus got built in. Lack of processing and marketing facilities in pulses also contributed its share to the woes of pulse growers. The increasing shortage of pulses, resulted in the need for more and more import which, in turn has dampened the speed of rejuvenation of pulses sub-sector of agriculture sector.

The net per capita availability of pulses has fallen from 60.7 (1950-51) to 33.4 g (1991-92). On the contrary, the daily per capita availability of cereals has registered an increase from 334.2 (1950-51) to 443 g (1991-92). It leads to increase in the pulses/cereal ratio from 0.18 to 0.08 g i.e., by 55 per cent. This is despite the increases of 24.36 per cent in area; 61.71 per cent in production and 29.93 per cent in production. It is significant to note that almost all these increases had taken place during 1950-51 to 1960-61. The area, production and yield of pulses have either stagnated or declined since then. This stagnation of pulse production and productivity should be viewed seriously not only from the point of security and quality of food for our people, especially the poor and the rural population, but also from the soaring import bill, imbalance and distribution in the cropping pattern and resource allocation among various sub-sectors of agriculture.

Introduction

The nature and magnitude of genetic variability present in the genetic stock afford the plant breeder, information to formulate a purposeful breeding programme for crop improvement. The association and the influence of yield components with yield, their heritability and genetic advance would characterise the various steps in the breeding programme in achieving the aim of the breeder. Studies on these lines in various crops have hastened the realization of crop improvement in general.

India grows a variety of pulse crop which probably no other country in the world grows. These are multiple utility, energy high crops as they provide protein for human consumption, green nutritious fodder and enrich soil fertility through biological nitrogen fixation. Vigna radiata (L.) Wilczek, commonly known as greengram or mungbean, is the most widely distributed of the six cultivated Asiatic Vigna species.

The current breeding approaches to yield improvement in greengram are based on the recognition that this crop have lost a large part of their genetic variability in the process of adaptation to stress environment. This variability must now be regenerated.

The foremost need for this purpose is the collection of germplasm from different parts of the world and the organisation of a very intensive hybridization programme, using diverse genetic stocks as parental lines. Selection of parents for hybridization based merely on geographic diversity can no more be a suitable criterion. The importance of genetic diversity has long been appreciated by crop specialists. Such an analysis will eventually help to choose desirable parents for hybridization and evolve superior genotypes.

In recent years, we are just experiencing a surplus production in cereals and oil seeds leading to self-sufficiency through green revolution and yellow revolution. However, shortage in the production of vegetables has drawn the attention for increasing the cultivation of vegetables to provide food and nutrition security.

Vegetables are being cultivated over an area of 49 million hectares with the production potential of 487 million tonnes in the world. This accounts for 2.85 per cent of total cropped area in the world. India is the second largest producer of vegetables next to China, sharing nearly 12 per cent of the total world output (Joshi and Shukla, 1997). Vegetables occupy nearly 8.02 million hectares with the production potential of 133.10 million tonnes in the year 2009 in India (Anonymous, 2009).

Bhendi (Abelmoschus esculentus (L.) Moench) is an important member of family malvaceae and commonly known as okra or ladyfinger in India. It is one of the most ancient and traditional vegetable crops grown in tropical and subtropical regions of the world (Martin and Ruberte, 1978). Bhendi is originated from tropical Africa with 2n = 8x = 72 or 130 or 144 chromosomes and is an allopolyploidy in nature (Joshi and Hardas, 1956; Suresh Babu, 1987). Martin (1982) reported that it behaves as a diploid. Under the genus Abelmoschus, there are 30 species in the old world and four in the new world (Joshi et al., 1974). Out of them, Abelmoschus esculentus, is the only species known to be cultivated. Bhendi is being raised in India in an area of 0.44 million hectares with an average production of 4.52 mt with the productivity of 10.27 t/ha (Anonymous, 2009).

The Coconut palm is a monotypic species of the family Arecaceae, under the tribe Cocoideae. It is considered as an important commercial crop in more than 18 countries in the world. The palm provides food, drink, shelter and also supplies raw materials for a large number of industries. Every part of the palm is utilized for some economic purpose or another. Hence, it is referred to as ‘Tree of Wealth” or the “Tree of Life” (Satyabalan, 1993). It is native of South East Asia. Genetic diversity has become one of the keywords of scientists who are concerned about the sustainable management of different tree crops. Genetic diversity plays an important role in tree breeding, because hybrids between populations of diverse origin, generally display a greater heterosis than between closely related parents (Zobel and Talbert, 1986). The present study was formulated to identify divergent parents for future breeding programme.

Two hundred and fifty genotypes of coconut cultivar Chawghat green dwarf, distributed in the two districts of Kerala viz., Kottayam and Pathanamthitta were evaluated for nut yield per plant during June-July, 2000. Seventy five genotypes, which had single tree nut yield of more than population mean ± 2 SE were selected as per the method outlined by Ledig (1974). These 75 genotypes were observed for 10 nut and endosperm characters in two seasons (years), during June-July 2000 and 2001.

Each tree was considered as a single genotype. Thirty nuts from a single tree were collected and divided into three replications (Chauhan and Kanwar, 2001; Thirugnanakumar, 2006a, b). Observations were recorded on 10 nut and endosperm characters viz.,1) oil content (%), cold percolation method; (Kartha and Sethi, 1957), 2) weight of unhusked nut (g), 3) weight of husked nut (g), 4) diameter (polar) of the husked nut (cm), 5) diameter (equatorial) of the husked nut (cm), 6) thickness of husk (cm), 7) husk: nut ratio, 8) thickness of meat (mm), 9) weight of kernel (g) and 10) weight of copra (g). The mean values so obtained were subjected to statistical analyses, in Randomized Block Design, as suggested by Chauhan and Kanwar (2001) and Thirugnanakumar et al.(2006a, b). The D² estimates were made following Mahalanobis (1936), as described by Rao (1952). Clusters were prepared following Tocher (Rao, 1952).

Pomegranate is one of the popular fruit crops of tropical and sub tropical in India and enjoys high reputation for its dietetic and medicinal properties. The fruit is native of Iran and is extensively cultivated in Mediterranean countries like Spain, Morocco, Egypt, Iran, Afghanistan. It is also grown to a lesser extent in Myanmar, China, Japan, India and U.S.A.

The area under pomegranate cultivation has increased several folds in the recent past after the introduction of soft seeded varieties. Out of 30,000 hectares under this crop in India, Maharashtra state alone grows over eighty per cent of area with an average production of 8000 kg ha^-1 (Mote et al.,1992). The export of pomegranate fruits was 1790.3 tonnes in 1991-92 valued at rupees 215.3 lakhs which was more than two fold over the previous year’s export earnings (Chadha, 1994). The utility of the crop is gaining importance and at present new orchards of pomegranate are being planted on large acreage. Because of its versatile adaptability, hard nature, low maintenance cost, steady and high yields, fine table and therapeutic values, better keeping quality and very good export potential, there is greater scope for extending its area and increasing the production especially in the hot and semi arid regions of India.

In pomegranate, market preference is for the attractiveness of the fruit which are exhibited through better size, colour with bold and deep coloured arils besides possessing high juice-content. However consumers prefers the softness of the arils with low acidity. While, there are number of cultivated types available with these desirable characters, there are hardly cultivar having a combination of all or atleast a majority of them. Pomegranate improvement work, therefore has to be oriented towards the production of soft seeded type with other desirable characters (Phadnis, 1974).

The mango is one of the choicest fruit crops of tropical and sub-tropical regions of the world. Its popularity and importance can easily be realized by the fact that it is referred as ‘King of fruits’ in the tropical world. India ranks first, both in area (2.51 million hectares) and production (15.02 million tonnes) of mango and it contributes to 42.1 per cent of world’s mango production. Presently, India is home to more than 1000 mango cultivars differing in taste, aroma, size, fibre content and pulp characteristics.

Though more than 1000 mango cultivars are reported, only 25-30 are of commercial importance. Most of the important cultivars are not amendable to hi-tech cultivation practices and do not meet the requirements of modern horticultural production systems like precocity in bearing, dwarfing, regularity in bearing with high yield, resistant to diseases, pests, physiological disorders and good keeping quality. Hence, breeding attempts to develop an ideal mango variety would be dwarf, regular bearer with medium size fruits (250-300g). Additionally, it should be highly tolerant to various fungal and bacterial diseases. A variety suitable for pickling is also gaining the attention of the breeders. An ideal pickling type should have high acidity, high fibre, good texture and characteristic raw mango flavour.

The first and foremost step in developing an ideotype is to explore the vast diversity and systematic characterization for utilization in the breeding programme.

Considering the importance of conserving the available gene pool, systematic exploration works are being carried out by National Institute like Indian Institutes of Horticultural Research (IIHR, Bangalore), National Bureau of Plant Genetic Resources (NBPGR, New Delhi) and others to collect and conserve the germplasm in Field Gene Banks. Recently, in addition to the traditional germplasm conservation methods, cryopreservation is also gaining importance especially in the conservation of nuclear gene (pollen parent) diversity for future breeding.

Utilizing the conserved germplasm in the breeding programme requires precise information on the genetic relationships within such germplasm. Information on the genetic distance among the germplasm accessions will also help to avoid the duplicates, widen the genetic base of the core collections and ultimately help in preserving the valuable diversity.

Jack bearing the largest edible fruit in the world, is a tropical evergreen tree belonging to the family Moraceae. Previously, it was known as Artocarpus integrifolia.It is an indigenous fruit crop, probably originated in Western Ghats of India (Santapau, 1966) and is widely cultivated in South Asia, East Indies and other warm areas of both the hemispheres. Jack tree is commonly grown in Burma, Malaysia and Brazil. It is hardly recognized as a commercial fruit crop in India even though it is widely distributed in Southern states viz,. Kerala, Tamil Nadu, Karnataka and Andra Pradesh. It is also cultivated in other states like Assam, Bihar, Orissa, Maharashtra and West Bengal. It is an invariable component of Kerala’s homesteads and also grown as a shade crop in coffee, arecanut and cardamom plantations. It is also grown as a standard crop in pepper plantations. The crop has got a rare distinction of being used as the staple food of Kerala tribals and also in some African countries like Uganda.

Gamboge tree Garcinia gummi-gutta (L.), is a member of the Clusiaceae family. It is a botanical cousin of Garcinia indica Choisy. It is a cross pollinated crop. It is called as Kodumpuli in Kerala. It is native of Tropical Asia. It thrives best in the ever green forests of Konkan, stretching from southward to the Kerala coast and Western Ghats upto 1800 m min the Nilgiris (CSIR, 1956). In Kerala, majority of the populations occur naturally in the central districts of Kerala, of different altitudes ranging from sea level to 200 m.

It is one of the potential under-exploited fruit crops. Now, it is gaining momentum for its commercial, industrial and medicinal importance. The dried rind is sold in the market at the rate of Rs. 200 per kg (Muthulakshmi et al.,1999). It is used as a food preservative, spicy source with astringent taste. It is meant for its good flavour, taste and keeping quality. The fruits are too acidic and cannot to eaten raw. The dried rind has unique use in fish curries for imparting its delicate flavour (Sarah, 1998). Dried rind can also be used for polishing gold, silver and coagulating rubber latex. Hydroxy citric acid (HCA) is a very rare natural components being extracted from the rind and is marketed in the name of ‘citrin’ and ‘citrimax’. It has high export value and fetches considerable foreign exchange. In foreign countries, it is used as a herbal medicine against cardiac diseases and for weight management through blocking fat synthesis. The derivatives of acid are potent metabolic regulators of obesity. The unique acid, lowers the blood lipids such as cholesterol and triglycerides by triggering the fatty acid oxidation in the liver through thermogenesis.

Rice (Oryza sativa L.) is the most popular crop and source of food for more than one-third of the world’s population. About 90 % of the world’s rice is grown in Asia and more than 3 billion Asians rely on rice for 30–75 % of their total calories (Braun and Bos 2004). It has been cultivated in four different ecosystems viz., irrigated, rainfed low land, upland and flood-prone (Halwart and Gupta, 2004). Since rice planting has been started around 8,000 to 9,000 years ago, the level of diversity would be more than it expected. The genetic diversity plays a major role in survival and adaptability of a species, as changes happen in environment. Organism needs to make changes in the phenotype that enables it to adapt and survive in unfavorable conditions. The inadequate knowledge on diversity of a species reduces the chance of widening the genetic base of that species. The venture of green revolution in Indian agriculture has narrowed down the genetic base of any popular crops. Therefore, collection, conservation and utilization of germplasm are very much needed in the present scenario for improving the varieties against biotic and abiotic stress.

Morphological and biochemical trait based diversity studies being largely influenced by environment as phenotype and/or enzymes are altered by the environmental and developmental changes. Therefore, adapting DNA based molecular markers for genetic diversity studies would be more reliable to overcome the environmental influence. Being molecular markers as a versatile tool, it establishes its strong holds in several fields of life science. Molecular marker based technique does not require DNA sequencing but it is generally based on nucleic acid hybridization or polymerase chain reaction (PCR). The PCR based tests has several advantages over hybridization technique as it is cheaper, speedy and sensitivity. Therefore, PCR based markers have been used extensively in genetic diversity study for assessing genetic variation within the species. The recent advent of molecular and computational tools now enables the estimation of genetic diversity and allele frequency between the genotypes easy.

A successfully developed new cultivar should have stable performance and broad adaptation over a range of environments, seasons and locations, in addition to high yield potential. Evaluating performance stability and range of adaptations is becoming increasingly important in breeding programs. Since stability and adaptability are important selection criteria in breeding programs, in depth research on stability is needed for a better estimate of crop performance and adaptability (Lin and Binns, 1988).

Having realized the importance of genotype × environment, several biometrical models have been developed to analyse the stability of genotypes. Such models have been discussed, critically reviewed comprehensively by Knight (1970), Freeman (1973), Hill (1975), Brain (1986) and Gautam et al. (1986).

However, the various methods proposed for the statistical analysis of genotype × environment are based on one of following approaches (Jain, 1982). In the first the variance interactions are estimated by equating the observed mean squares in the analysis of variance to their expectations on the random model. The second approach called phenotypic approach by Hill (1975) used the technique of partitioning the genotype _× environment component of variability into its linear and non-linear portions of assessing the stability of genotypes over a range of environments. This approach which is very widely adopted in plant breeding, came to be known as “Joint regression analysis”.

Many workers contributed for the development of this approach, notably Finlay and Wilkinson (1963), Eberhart and Russell (1966), Freeman and Perkins (1971) and Shukla (1972). The third approach called genotypic approach which also suggested by Hill (1975) is based on fitting of general models in which it specify, the contribution of genetic, environmental and genotype × environment to the generation means and variance. The contributions for he development of this approach were from Bucio (1966), Bucio and Hill (1966), Bucio et al. (1969), Perkins and Jinks (1968), Breese (1969), Hill and Perkins (1969) and Perkins (1970). Linear regression and joint regression models were more commonly used due to their simplicity and reliability in biological experiments. In general, these approaches fall conveniently into two parts.

Stability and adaptability studies have been carried out for upland or hill rice varieties also. Amirthadevarathinam (1987) observed significant genotype × environment and reported that both linear and non-linear components were equally important for assessing stability of yield and four yield components in four environments. Both TKM 6 and Poongar were high yielding with adaptability and stability in addition to being especially suitable for unfavourable environments. Kuruvaikalangium was the best performer for all characters except grains per panicle for which PM 1023 was the best.

Dineshkumar (1987) evaluated sixteen early maturing genotypes for their stability in four major agroclimatic zones of the Karnataka state. No genotype was found stable as they observed more of unpredictable variance (pooled deviation) than predictable (genotype × environment linear).

Ganesh and Soundarapandian (1987) observed that stability of number of ear bearing tillers was a major contributor for yield stability Shivaprakash (1987) reported similar results.

Studies by Sinha and Biswas (1987) on yield and yield components of twenty photo insensitive rice cultivars revealed IR-36 and IET-4094 as high yielder with unit ‘bi’ and least ‘S² d_i’ and hence they were recommended to be suitable for general cultivation for all the environments under study. Similarly IET-2881, which had high mean yield with high ‘bi’ was found suitable for high yielding environments.

Genotypes × Season interaction is of major importance to the plant breeder in developing stable high yielding varieties of crop plants. When new varieties are tested over a series of seasons, the relative ranking of the varieties for any given attribute is rarely the same at each season. This increases the difficulty of identifying superior stable genotypes. Comstock and Moll (1963) have shown statistically the effect of large genotype × environment interaction is reducing the progress from selection.

In order to minimize the genotype × season interaction, stratification of the seasons can be practiced. The implification in stratification is that suitable selections could be made for the infavourable and favourable seasons encountered within the sampling units proposed. Stratification of environments has been practicised for a long time to identify suitable selection that could be made for the narrower range of environments encountered within the sampling units proposed. However, even with this refinement of technique, the interactions of genotypes with locations in a sub-region and within environments encountered at the same location in different years, frequently remain too large (Allard and Bradshaw, 1964). Little is known about the environmental factors contributing to such interactions. Sprague (1966) suggested that even if such information are available, the possibility of materially reducing genotype × environment interaction in field experiments would remain questionable.

On line with Allard and Bradshaw’s (1964) statement, the interactions of genotypes with locations in a sub-region with different seasons at the same location in different years, may remain too large. As far as sesame is concerned, practically nothing is known about the factors contributing to such genotype × season interactions. Hence, the progress in breeding a stable variety of sesame has been slow. Since sesame in India is grown essentially as rainfed crop, fluctuations in yield levels closely follow changes in the environment and seasons. Breeding for multiseasonal variety for may small regions within a state is being considered necessary. There is widespread awareness of achieving stability of production as well as improvement in yield of sesame under low and high-in-put conditions as well as for different seasons.

In developing countries, the most important challenges is to increase food productivity for the continuously growing population from limited land area. To great extent, this challenges has been met with good amount of success in cereals but not in case of pulses. Pulses from an indispensable component of Indian agricultural too. Further, it is an excellent source of protein to the growing population who are mostly vegetarians. The high level of lysine in the protein makes them ideal supplement to cereals. Moreover, they are endowed with nitrogen fixation, and thus improve the soil fertility.

India is one of the major pulse growing countries in the world with a total area of 23.31 million hectares, with a total production of 14.50 million tones (Source: FAO, 2011). The area, under pulses has decreased particularly during the last decades as a consequence of intensive diffusion of techniques in green revolution on the high yielding varieties of cereals. This is mainly due to the low yield potential of legumes even under high input conditions.

Among the various pulses, blackgram/urd bean known scientifically as Vigna mungo (L.) Hepper, former known as Phaseolus mungo (L.) belonging to the tribe Paseolea of family Papilionaceae is of immense importance. It is the most widely grown and highly esteemed grain legume. In India it occupies 2.9 million hectares with an annual production of 1.24 million tones (Source: FAO, 2011).

In Asia this crop is widely cultivated in India, Pakistan, and Bangladesh both in kharif and rabi seasons. In India, it is mainly grown in the states of Madhya Pradesh, Maharashtra, Uttar Pradesh, Rajasthan, Karnataka and Bihar. Tamilnadu is placed eleventh and tenth in area and production respectively (FAO, 2011).

Ramya (2012) studied stability of 12 hybrids in three environments. The researcher selected the 12 hybrids based on the standard heterosis. The hybrids are: P₂ × P₅, P₁ × P₅, P₃ × P₅, P₂ × P₇, P₂ × P₃ and P₁ × P₂. Among the twelve hybrids, the cross combinations viz., P₂ × P₅, P₂ × P₇ and P₂ × P₃ showed non-significant reciprocal effects for most of the traits including fruit yield per plant. The direct hybrid P₁ × P₂ showed less than 40 per cent standard heterosis for fruit yield per plant. It also exhibited low standard heterosis for number of fruits per plant. Eight hybrids viz., P₂ × P₅, P₅ × P₁, P₃ × P₅, P₂ × P₇, P₁ × P₅, P₂ × P₃, P₂ × P₁, P₅ × P₃, based on standard heterosis (>40 per cent) and their parents viz., P₁, P₂, P₃, P₅, P₇ were selected and grown in three different locations for finding their stable performance. Several authors have suggested different types of models to identify the stable genotypes. The model most commonly preferred by breeders is Eberhart and Russell (1966) model which was used in the present investigation. Various stability parameters were worked out on the available data and the results were discussed below.

Among the ten traits studied, days to first flowering, fruit weight and fruit girth showed non-significant genotype × environment interaction. Hence, the remaining seven traits were taken for further analysis. ANOVA across environment revealed highly significant mean sum of square for genotypes, indicating the presence of wide genotypic variability among the genotypes involved in the study for all the characters studied. High significant differences were observed for environments for the traits viz., number of branches per plant, fruit length and fruit yield per plant, indicating the divergence among the growing environments and differential response of genotypes to the various environments. The main factors contributing to the divergence of the environments might be temperature differences during crop season, intensity and duration of sun shine hours. Therefore, the genotypes must be tested over an extensive range of environments for proper assessment of stability of genotypes (Salesh Kumar Jindal et al.,2008).

Environmental stress can disrupt cellular structures and impair key physiological functions. Drought, salinity, and low temperature stress impose an osmotic stress that can lead to turgor loss. Membranes may become disorganized, proteins may undergo loss of activity or be denatured, and often excess levels of reactive oxygen species are produced leading to oxidative damage. As a consequence, inhibition of photosynthesis, metabolic dysfunction, and damage of cellular structures contribute to growth perturbances, reduced fertility, and premature senescence. Responses to environmental stresses occur at all levels of organization. Cellular responses to stress include adjustments of the membrane system, modifications of the cell wall architecture, and changes in cell cycle and cell division. In addition, plants alter metabolism in various ways, including production of compatible solutes that are able to stabilize proteins and cellular structures and/or to maintain cell turgor by osmotic adjustment, and redox metabolism to remove excess levels of ROS and re-establish the cellular redox balance. At the molecular level, gene expression is modified upon stress and epigenetic regulation plays an important role in the regulation of gene expression in response to environmental stress.

Climate change drastically influence water availability, salinity and several adverse soil conditions which will have direct bearing on original yields. Abiotic stress factors influence growth and secondary metabolite production in higher plants. The influences are well marked. In fact, productivities depend on the changed ecosystem also. Secondary metabolites play a major role in the adaptation of plants to the changing environment and in overcoming stress constraints. This flows from the large complexity of chemical types and interactions underlying various functions: structure stabilizing, determined by polymerisation and condensation of phenols and quinones, or by electrostatic interactions of polyamines with negatively charged loci in cell components, photoprotective, related to absorbance of visible light and UV radiation due to the presence of conjugated double bonds, antioxidant and antiradical, governed by the availability of –OH, –NH2, and –SH groupings, as well as aromatic nuclei and unsaturated aliphatic chains, signal transducing. Several plant-abiotic stress stimuli systems evidenced the multiplicity of biochemical mechanisms involved in the protective role of secondary metabolites:

Abiotic Stress in Plants
             
World population is growing at an alarming rate and may reach about 6 billion by the end of the year 2050. Though, the agricultural productivity is also being increased world over, yet it is not keeping pace to meet the demand of food availability. The main reasons for limiting the agricultural productivity are water shortage, depleting soil fertility and mainly various abiotic stresses and climatic change. Minimizing these loses is of primary concern for all nations to cope with the increasing food requirement. The abiotic stress is defined as the negative impact of non living factors on the living organism in a specific environment and abiotic stress is the most harm full factor concerning the growth and productivity of crops worldwide. Researches have shown that abiotic stressors are at their most harm full when they occur together in combination of abiotic stress factors (Mittler, 2006; Bianco and Defez, 2011). Numerous stresses caused by complex environmental conditions i.e. drought, too high and too low temperatures, freezing, salinity, UV light, heavy metals and recently through smog (air pollution) leading to substantial crop losses worldwide (Mahajan and Tuteja, 2005). The abiotic stresses might increase in the near future even because of global climatic change.

Plants that are affected by various abiotic stresses react differently as a result such as the reduction in organ size or a change in the antioxidant enzyme system, and while drought and heat are often studied separately, in nature they often occur together, meaning it is essential to carry out joint studies. Furthermore, and related to the above when we consider high temperature stress, one must always consider the use of water and nutrients by the plant and other physiological functions. The effects of heat stress can also be analyzed by the technique that measures lipid peroxidation in polyunsaturated acids of the plasma membrane. The accumulation of metals in plants, affects the normal processes of plant metabolism. The study shows that there is a relationship between high metal contents in plants and their modified morphology: strong reduction of leaf thickness, modified parenchyma structure, and decreased mitochondria organization were ascertained, although toxic symptoms were apparently absent. Water-deficit stress has a significant effect on plants growth and development, with primary affects on plant structure, leaf morphology and cell ultrastructure. Physiological processes such as stomatal conductance, photosynthesis and respiration are consequently impaired with further implications on the metabolic functions such as carbohydrate and energy production as well as carbohydrate translocation and utilization.

The stresses, drought, salinity, chemicals, cold and hot temperatures, have interconnected effects on plants, resulting in the disruption of protein homeostasis. Maintenance of proteins in their functional native conformations and preventing aggregation of non-native proteins are important for cell survival under stress. The heat shock proteins buffer this environmental variation and are therefore important factors for the maintenance of homeostasis across environmental regimes. Heat shock proteins are known to be expressed in plants experiencing high-temperature stress. Heat shock proteins are important in relation to stress resistance and adaptation to the environment. Their molecular function might be membrane or protein stabilization, but, for now, for most heat shock proteins the molecular function remains to be elucidated. The general observation of the response and induction of heat shock proteins following heat stress suggests that they play a fundamental role in cellular homeostasis. It is possible that heat shock proteins may be involved with the phenomenon of acquired thermotolerance. Heat stress disturbs cellular homeostasis and can lead to severe retardation in growth and development, and even death. Temperature stress can have also a devastating effect on both the plant anabolism and catabolism, initially acting on protein complexes, being the quaternary structure the first folding that is lost during heat stress or heating. Understanding the role of HSPs in relation to stress resistance in a more applied perspective as a potential indicator of stress is important. New technological developments make it possible to investigate the role of genes coding for heat shock proteins in greater detail. A combination of genomics and proteonomics will further elucidate the effects of stress on expression patterns at the DNA, RNA and protein level.

The extreme temperatures those are consequences of present-day global climate changes are considered as major abiotic stresses for crop plants. Different studies clearly show that temperatures exceeding the limits of adaptation substantially influence the metabolism, viability, physiology, and yield of many plants. Plants exposed to extreme temperatures often show a common response in the form of oxidative stress. However, the extent of damage caused by extreme temperatures depends greatly on the duration of the adverse temperature, the genotypes of the exposed plants, and their stage of growth. There is ample need to develop temperature tolerance in crop plants by exploring suitable strategies. Numerous research findings support the notion that induction and regulation of antioxidant defenses are necessary for obtaining substantial tolerance against environmental stress. The development of genetically engineered plants, by the introduction and/or overexpression of selected genes, would to be one feasible strategy. However, plant adaptation to either high temperature or low temperature is a multigenic response which is very complex in nature. Thus the task of identifying the traits those correlate with stress tolerance is incredibly difficult for researchers. Plant response to continuous light depends on plant tolerance and can be modified by alteration in temperature, light intensity, CO2 level, and other environmental factors.

Most food legumes have a long history of domestication almost as long as cereals, and during this time they have been subjected to conscious and unconscious selections for better adaptation to environmental condition as well as better seed yield. In general, crops during their ontogeny faces a number of abiotic stress viz., excessive and/or low soil water stress, soil salinity stress, high as well as low temperature stress. It has been well documented that crop yields would be greater in many cropping regions if more water were available. 
Availability of water for agriculture is being challenged increasingly because of growing demand for water from other sectors such as industry, urban use, and for social and environmental purposes. Water stress may conceivably arise either from an insufficient or from an excessive water activity in the plant’s environment. Many physiological characteristics are correlated with the water potential of mesophyll tissue but the correlations are species specific. There is a general hierarchy of sensitivities among general physiological activities. Most sensitive are cell expansion, cell wall synthesis, protochlorophyll formation, and nitrate reduction. Generally turgor pressure is still accepted as the best indicator of water stress in plants. The specific mechanism by which turgor regulate physiological function probably relate to cell walls and membranes. Cell membrane structure, and spatial arrangement of enzyme, transport channels, cellulose synthesis rosettes, and receptor proteins may be dependent on turgor pressure.

We do not know when intercropping began nor why early civilizations fostered its use. Whether by design or accident, intercroppinq dominated early agriculture and is still practiced in many areas of the world. With the advent of “modern” agriculture, intercropping began disappearing from many areas. This shift was driven primarily by mechanization and specialization. Despite pressures to abandon intercropping, it has survived and flourished Inereasing interest in sustainability and environrnental concerns have drifted attention back to intercropping as a means of better utilization of resources while preserving the environment.
Through intercropping, farmers can achieve the full production of the main crop and also an additional yield (bonus) associated with an increased plant population of the second component. Hence, intercropping can increase incomes obtained by smallholder farmers in areas where labor is not shortage, through reduction of economic risk and market fluctuation resulting from growing a single crop which is more prone to natural hazards and helping the farmers in better utilization of land by having more than one crop produced per unit area. Though all intercrops produced higher productivity, the farmers could better use the appropriate population of component crops in intercropping systems in order to maximize yield of both crops as well as total productivity. It is, therefore, important to support intercropping systems with appropriate agronomic practices such as timely irrigation, pest protection and the likes to sustain the cropping system in the countries where labor is not problem for proper management in general even though sometimes sole cropping may became more productive.

Marginal land areas will need to be used to meet the increasing requirement of future generations, especially in developing countries. These marginal areas commonly impose abiotic stresses on crops due to factors such as salinity, drought, flooding, low nutrients and aluminium or heavy metal toxicity. As a consequence, the growth and yield of crops from such areas is typically low and their quality in also poor. Endogenous plant growth regulators play an important role in regulating plant responses to abiotic stress by sensitizing growth and developmental processes. While the physiological and molecular mechanisms linked to the role of ABA and cytokinins in stress tolerance are well explained, there is growing interest to elucidate the associations of auxins, ethylene, gibberellins, brassinosteroids, and polyamines in stress tolerance mechanism and also on possible cross talk mechanism among different growth regulators during stress tolerance acquisition. Identification and characterization of the gene regulating synthesis of different endogenous growth regulators and recent progresses on hormonal signaling, mutant research, and physiological actions have provided scope for manipulating their biosynthetic pathways for developing transgenic crop plants with enhanced abiotic stress tolerance. Researches have also provided some leads in exploiting the potential of growth regulators in enhancing the resistance to abiotic stresses of crops. Plant growth-regulators (PGRs), are biochemical and chemical compounds stimulates plant growth and productivity when applied, even in small quantities at appropriate plant growth stages. These are being extensively used in agriculture to enhance the productivity in agricultural crops. Their central role in plant growth and development is through nutrient allocation and source-sink transitions while most of the plant bioregulators (PBRs) stimulate redox signaling under abiotic stress conditions.

Plant–water relations concern how plants control the hydration of their cells, including the collection of water from the soil, its transport within the plant and its loss by evaporation from the leaves. Flow of water through plant and soil over macroscopic distances is driven by gradients in hydrostatic pressure. Over microscopic distances it is driven by gradients in water potential. Evaporation of water from leaves is primarily controlled by stomata, and if not made good by the flow of water from soil through the plant to the leaves, results in the plants wilting. Plant water deficit is initiated as the crop demand for water exceeds the supply. The capacity of plants to meet the demand and thus avoid water deficit depends on their “hydraulic machinery.” This machinery involves firstly the reduction of net radiation by canopy albedo, thus reflecting part of the energy load on the plant. Secondly, it determines the ability to transport sufficient amount of water from the soil to the atmosphere via the stomata in order to provide for transpiration, transpirational cooling and carbon assimilation. Water is transported by way the soil-plant-atmosphere continuum and it is largely controlled by the resistances in the continuum as determined by root, stem, leaf, stomata and cuticular hydraulic resistances. The gross effects of deficient and of excessive soil moisture on plant growth are well known, but controversy has existed for many years around the question whether the so-called “‘available moisture” is equally available for plant growth or available only with such increasing difficulty that plant growth functions are retarded before the wilting point is reached. Various measurable aspects of plant growth do not respond in the same manner to increasing moisture stress. Crops will respond to irrigations, although measured soil moisture stress is quite low. Problems of relating plant growth to soil moisture stress conditions varying with both time and soil depth are considered. Soil factors affecting density or depth are reviewed and several ways weather factors influence soil, -moisture-plant-growth relations summarized.

Partitioning of assimilated carbon among sink organs is a critical factor that controls the rate and pattern of plant growth. Environmental stress often restricts resource availability while successful acclimation sets in motion processes that restore the supply. A key mechanism contributing to regulation of carbon partitioning is an expression of genes that control activity of the enzymes which initiate sucrose metabolism at specific sites and stages of ontogeny. Drought stress not only limits the size of the source and sink tissues but the phloem loading, assimilate translocation and dry matter portioning are also impaired. However, the extent of effects varies with the plant species, stage, duration and severity of drought. Crop production faces many challenges, due to changing environmental conditions and evolving needs for new plant-derived materials. 
The extreme temperatures those are consequences of present-day global climate changes are considered as major abiotic stresses for crop plants. Temperatures exceeding the limits of adaptation substantially influence the metabolism, viability, physiology, and yield of many plants. Plants exposed to extreme temperatures often show a common response in the form of oxidative stress. However, the extent of damage caused by extreme temperatures depends greatly on the duration of the adverse temperature, the genotypes of the exposed plants, and their stage of growth. Numerous research findings support the notion that induction and regulation of antioxidant defenses are necessary for obtaining substantial tolerance against environmental stress. Plant adaptation to either high temperature or low temperature is a multigenic response which is very complex in nature. Plant response to continuous light depends on plant tolerance and can be modified by alteration in temperature, light intensity, CO2 level, and other environmental factors.

Though the pesticide application represents viable solution to pest control, however indiscriminate use poses threat to target as well as non-target crops. The side effects of pesticides therefore have to be considered based on their use and on the agricultural system to which particular pesticide is used. Studies should be implied on effects and persistence of pesticides in crops and is consequent effects on soil microbial flora and associated nitrogen metabolism. Safe alternate methods like development of relatively cheaper biopesticide should be encouraged. More efficient methods have to be developed and validated for dissipation of pesticide residues in food grains. Human health and environment has gained great importance in the modern world. The widespread use of insecticides has resulted in problems caused by its interaction with the natural biological systems. Study showed that higher amounts of acetamiprid have some negative effects on corn plant physiology. Thus, the use of pesticide should be controlled following the standards of developed countries to protect health and the environment.

1. Introduction

The development of food products using composite flour has increased and is attracting much attention from researchers, especially in the production of bakery products and pastries. This article focuses on the use of composite flour to produce food products, namely bread, biscuits, and pasta, with looks at on its impact, following some improvements made, on the sensory quality, rheology characteristics, and nutritional values as well as its overall acceptance. The blending of wheat flour with various sources of tubers, legumes, cereals and fruit flour in different percentages to produce variety of food products are also reported. The positive effects of the use of composite flour can be seen in the final product related to the functional and physicochemical properties and health benefits of raw blended flour along with percentage blending. Overall, composite flour is a good new approach to utilizing uncommon food products as the application of composite flour produced products with different characteristics and quality, depending on the types and percentage of wheat flour used in the formulation.

Bread has been the staple food worldwide and habit of bread is derived in part due to the convenience and wholesomeness. Wheat is a commonly used cereal for making bread as it gives the desired texture due to the presence of gluten forming proteins like gliadins and glutenins (Decock & Cappelle, 2005). In earlier times idea of composite flour in developing countries originated in order to cut down on import of wheat (as it was not grown in many countries) but in recent past refined wheat flour consumption has lead to health issues and thus in order to improve nutritional and functional properties composite flour has been the norm. Composite flour is the one obtained by mixing wheat flour with cereal and legume flours for making bread and biscuits (Dendy, 1992). However, mixing of non-wheat flours, roots and tubers, legumes or other raw materials can also be regarded as composite flour.

1. Introduction

Celiac disease (CD) is an immune-mediated enteropathy triggered by the ingestion of gluten in genetically susceptible individuals. Gluten is the protein component in wheat, rye and barley. In the last 10 years, cutting edge scientific developments in this disease have led to the formulation of new concepts of epidemiology, pathophysiology and clinical manifestations. At present, the only available treatment for CD is a strict gluten-free diet (GFD) (Mulder et al., 2013; Theethira and Kelly, 2014). Until recently, the geographical distribution of CD was mostly restricted to Europe and other developed countries, such as the United States, Canada and Australia. Celiac disease is not only frequent in developed countries, but it is increasingly found in areas of the developing world, such as North Africa (Malekzadeh et al., 2005), Middle East (Rostami et al., 2004) and India (Basu et al., 2014, Deora et al., 2014; Yachha and Poddar, 2007). New epidemiological studies have brought evidence that this disorder is common in many developing countries as well, showing that the ‘global village of celiac disease’ has indeed a worldwide distribution (Fasano and Catassi, 2001).

The only available treatment for celiac disease is the strict, lifelong avoidance of gluten. When gluten is removed from the diet, the small intestine will start to heal and overall health should improve (Fasano and Catassi, 2001). Traditional substitutes for gluten-containing grains have been rice, tapioca, corn, and potato. However, more nutrient-dense grains, seeds, nut flours, and legumes are being incorporated into the diet to provide an enhanced palatability, variety, and nutritional quality. These include sorghum, millet, teff, quinoa, amaranth, flax seed, and buckwheat.

1. Introduction

1.1 Engineered health rice

Rice is one of the leading food crops in the world and sustains two-third of the world’s population providing 20% of the world’s dietary energy supply. It can be polished and marketed as white rice or can be marketed with the bran layer left intact as brown rice. The dry grain can then be steamed or boiled by the consumer to rehydrate and cook it (Kato, 2006). Despite its primary importance as a staple food, rice has several disadvantages. Primarily, rice is low in protein and high in starch. The low protein levels in rice can lead to protein malnutrition in societies where rice is the primary constituent of the diet. Deficiencies in essential amino acids may also result from a diet primarily comprised of rice. For example, lysine is the essential amino acid found in the lowest quantity in rice. The human body needs lysine for proper growth and repair of tissues. It is also important in the production of various enzymes, hormones and disease-fighting antibodies (Kato, 2006). The production of broken rice is nearly 15-20% of total production of rice (Bhullar and Bhullar, 2013). The broken rice is generally used for rice flour production and Indian traditional foods such as Idli, Dosa and weaning foods etc. Ugwu et al., (2012) reported that the rice broken can be utilized for the production of poly (3-hydroxybutyrate). The major value addition of broken rice is possible by reconstructing it into rice-shape and fortifying it with desired nutrients or micronutrients, which is a big challenge in terms of making the product acceptable to the consumers.

One approach to overcome the above mentioned challenges is to prepare artificial rice kernels or rice analogues by extrusion, in which the vitamins are embedded and consequently do not separate from the rice grains. This will utilize mainly the broken rice which is either discarded or sold at subsidized prices as the cattle feed. Furthermore, embedding makes extraction of the vitamin by rinsing or cooking more difficult and may provide a certain protection against oxidation, because the vitamins can be enveloped by a protective matrix (Steiger, 2010). The fortification of commercially produced staple foods allows exposed populations to benefit without making major changes to their eating habits (Kunz, 2009).The rice analogues prepared from extrusion can be used by addition of an appropriate proportion of water at a temperature ranging from 90°C-100°C, whereupon the rice product rehydrates within three minutes to obtain a product having the desired appearance and organoleptic properties to simulate natural rice grains (Harrow and Martin, 1982).

1. Introduction

1.1 Malnutrition

The term malnutrition generally refers both to under nutrition and over nutrition, but in this guide we use the term to refer solely to a deficiency of nutrition. Many factors can cause malnutrition, most of which relate to poor diet or severe and repeated infections, particularly in underprivileged populations. Inadequate diet and disease, in turn, are closely linked to the general standard of living, the environmental conditions, and whether a population is able to meet its basic needs such as food, housing and health care. Malnutrition is thus a health outcome as well as a risk factor for disease and exacerbated malnutrition, and it can increase the risk both of morbidity and mortality (Ogunrinade, 2014). A term used to refer to any condition in which the body does not receive enough nutrients for proper function. A person cannot properly digest or absorb nutrients from the food they consume, as may occur with certain medical conditions (Medicine, 2015). Malnutrition may range from mild to severe and life-threatening. It can be a result of starvation, in which a person has an inadequate intake of calories, or it may be related to a deficiency of one particular nutrient (for example, vitamin C deficiency).

Malnutrition is estimated to contribute to more than one third of all child deaths, although it is rarely listed as the direct cause. Lack of access to highly nutritious foods, especially in the present context of rising food prices, is a common cause of malnutrition. Poor feeding practices, such as inadequate breast feeding, offering the wrong foods, and not ensuring that the child gets enough nutritious food, contributes to malnutrition (WHO, 2015).

Pooled estimates report the prevalence of malnutrition among community-dwelling older adults of 6% and among hospitalized older adults of 39%. In developed countries, treatment of malnutrition is relatively inexpensive and effective: energy and protein supplementation using commercial “sip feeds” results in both weight gain and reduced mortality (Pereira et al., 2015). In 2013, one in four children under age five worldwide had stunted growth. Between 2000 and 2013, stunting prevalence globally declined from 33 to 25 %, and the number of children affected fell from 199 million to 161 million. In 2013, about half of all stunted children lived in Asia and over one third in Africa (UNICEF, 2015). Malnutrition may be several types as follows:

1. Introduction

Extrusion is one of the most preferred ways for creating the indulgence called ready-to-eat (RTE) snack foods with diverse shapes, sizes, colours and also nutritional and functional values which appeal to the diverse group of consumer with varied choices. In this chapter ready-to-eat extruded and puffed snacks are the focus covering the technology involved, criteria for ingredient selection, design of experiment, process modelling, effects of extrusion on physical, nutritional and functional quality of the snack; a few relevant case studies are also discussed.

1.1 Market for RTE snack foods

Indian cooking and lifestyle have undergone tremendous changes in the last 15 years. There are many major factors impacting this change which include, liberalization policy, dual income, separate living of couples, innovative kitchen applications, media proliferation, etc. The cooking style and eating habits in India varies drastically from southern part to northern part of the contry. Due to lifestyle pressure nowadays people prefer easy short way of cooking food rather spending too much time on cooking. Rapid urbanisation is also one of the reasons for people to buy such products. Snack foods comprise a very large variety of items including potato chips, crackers, nuts and extruded snacks, among others (Harper, 1981). Snack food extrusion includes subjecting selected raw material to a variety of complex physical processes to yield snacks with varied shapes and textures (White, 1994).

The RTE market in India was expected to expand to reach Rs. 2,900 crore by 2015, according to an analysis done by Tata Strategic Management Group (TSMG). The products may vary from noodles, pasta, masala packages, stuffed paratha, etc. and many more. There are many regional players who are making foray into ready-to-eat segment. Many national and international players like Nestle, Pepsico, ITC, Haldirams, Cavinkare, are already in Indian market with their products.

1. Introduction

Fermented milk products such as yoghurt are produced through out world (Kurmann et al., 1992). Yoghurt can be characterized as a gel like coagulated milk product, having a smooth consistency and a pleasing flavour and is now widely consumed both by infant and adult populations. It is common that yogurt preparation involves the use of equal amounts of two lactic acid bacteria (LAB): Streptococcus thermophillus (St) and Lactobacillus delbrueckii ssp. bulgaricus (Lb); samples prepared with these starter bacteria are labeled Lb-St (Ng et al., 2011). In the early stage of the incubation process, Lb stimulates the growth of St releasing amino acids from casein (where the most important is valine) and producing a moderate reduction in pH due essentially to St. Yoghurt has better digestibility than milk and this is related to its comparatively high content of free amino acids. Besides nutritional value, it possesses hypocholesterolaemic (Mann, 1977) and antitumour effects (Odd et al., 1983; Reddy et al., 1983).Yoghurt may be set or stirred and has a potential for being used as dietary supplement for infants. So they cross the line between dietary supplements, health foods and conventional foods with great facility. Now a days, emphasis is given on sweeteners and more natural sweeteners will be used (Hollingsworth, 2001). Natural sweeteners can be easily incorporated in yoghurt by blending cattle milk with fruit pulps like mango. The enhancement of other nutrients e. g. vitamins and minerals will be added advantage. Mango pulp which contains a high proportion of sugar, mostly monosaccharide, is easily adsorbed by the digestive systems (Celik and Bakirci, 2003).

Soybean is a comparatively inexpensive source of high quality protein. The protein and fat contents in soybean are above 40 % and 20 %, respectively. Nutritionally, soy protein is a more balanced plant protein for human consumption. Studies have indicated that consumption of soy protein decreases total serum cholesterol and minimizes risks for several cancers (Anderson et al., 1995; Messina, 1997; Zind, 1998). The positive health benefits associated with soybeans have greatly increased its consumer awareness which has created a large market for soy foods (Ohr, 2000; Liu, 2000). The problem of beany flavour in soy products can be overcome by lactic acid fermentation (Buono et al., 1990; Granata and Morr, 1996). Soy solids are not only abandoned source of protein but also have therapeutic properties against breast, prostate, colon and lung cancers due to its isoflavones like genistein and daidzein content. Fortification with soy made yoghurt beneficial in lowering cholesterol level and blood pressure and in relieving symptoms of menopause and osteoporosis.

1. Introduction

Milk and milk products constitute essential dietary components for a vast majority of the population. India with annual production of more than 135.6 million tonnes has emerged as leading milk producing nation. The per capita per day availability of milk in India is more than 290 g. Buffalo milk accounts for 57% of the total milk produced in India. Ethnic dairy products account for 90% of all dairy products consumed (Aneja et al., 2002). Many health benefits have been attributed to fermented dairy products and probiotic microorganisms (Salminen et al., 1998). The market for functional foods, nutraceuticals, wellness foods and beverages is fast growing. The harmful effects of synthetic drinks have propelled health conscious consumers to go for natural and traditional drinks. In search of better returns, the Indian dairy industry is widening its focus to include traditional milk products, and these are emerging as new profit centres for the organised sector.

Traditional dairy products have several advantages. They require low capital investment and give high profit margin. They are more appealing to the Indian palate. Dahi or curd is the most popular indigenous fermented dairy product. There are numerous references to dahi in vedic literature. The Prevention of Food Adulteration Act (Anon, 1976) describes dahi as a product obtained from pasteurized or boiled milk by souring (natural or otherwise), using harmless lactic acid or other bacterial cultures. Indian dahi and its western counterpart yoghurt differ considerably in terms of cultures used and their bouquet and flavour profiles (Aneja et al., 2002). The major flavor compound in dahi is diacetyl. Dahi made from buffalo milk has a firm body and white glossy appearance, with a cream layer on top. Mixed mesophilic cultures of Lactococcus lactis subsp. lactis, Lactococcus lactis subsp. cremoris, Lactococcus lactis subsp diacetylactis along with Leuconostoc species are grown together for production of dahi.

1. Introduction

Now a days, foods are not intended to only satisfy hunger and to provide necessary nutrients but also to prevent nutrition-related diseases and improve physical and mental well-being of the consumers (Menrad, 2003). In this regard, functional foods play an important role. The concept of functional foods which has evolved as the role of food in the maintenance of health and well-being and in the prevention of disease, has received increased scientific and commercial interest is recent past. Growth of functional foods markets include increased consumer health awareness, increased popularity of healthy foods, search for food-based drug substitutes, self-medication approach promoted by busy lifestyles and rapidly developing health conscious markets. Functional foods can be defined as foods “that can beneficially affect one or more target functions in the body, beyond adequate nutritional effect, in a way relevant to an improved state of health and wellbeing and/or reduction of risk of disease” (Stanton et al., 2005).

1. Introduction

There is a general consensus that fruit and vegetable consumption is a key factor for a balanced diet. Globally, majority of people consistently are consuming less than the daily recommended fruit and vegetable requirement. Even in developed nations e.g., Australia, Canada, Europe, UK and USA, researchers have concluded that there is large gap between actual and recommended consumption of both fruits and vegetables despite decades of concern and publicity while resultant outcomes were short-lived. In a study from 52 low and middle-income countries 77.6% of men and 78.4% of women consumed less than the minimum recommended servings of fruits and vegetables. Same study reported 74% low fruit and vegetable consumption among adults in India (Hall et al., 2009). In India, recent studies on the fruit and vegetable intake amongst urban residents was reported as 265 g per day as against 400 g per dayof fruits and vegetables excluding potatoes and other starchy tubers, that is recommended by the World Health Organization (WHO, 2008).

Epidemiological studies conducted in recent years have indicated a positive correlation between the consumption of fruits and vegetables and prevention of cancer and cardiovascular diseases. Health-promoting functional characteristics of vegetables are mainly attributable to their functional bioactive constituents. These effects can be listed as antioxidant activity, cholesterol-bindingcapacity, antidiabetic activity and angiotensin-converting enzyme (ACE) inhibitory activity. Studies conducted in cell culture models and animal models have revealed that bioactive compounds of plant foods, including soybean, hawthorn fruit, tea, buckwheat, oats, onion, garlic, almond, and vegetable juice, composed of tomato watercress, parsley, carrots, celery, lettuce, beets and spinach, have cholesterol-lowering activity (El-Shatanovi et al., 2012; Vadivel et al., 2011).

1. Introduction

The demand for non-dairy based beverages in form of non-dairy milk is on rise due to several reasons. Firstly, the prevalence of lactose intolerance and milk allergy amongst a major percentage of population who cannot consume dairy milk and look for alternate source of proteins. The need for functional drinks is also a major factor which contributes to the increase in demand of milk-alternatives. It has also been reported that milk processors around the world face an uphill battle, including the dominance of private labels; consumer concerns over the presence of growth hormones in non-organic milk; fluctuations in commodity prices; supply shortages for organic milk; and growing consumer concern about the safety of animal products in general. With that long list of challenges, the market has had few growth opportunities even though consumers continue to prize milk for its nutritional benefits.

2. Need for Non-dairy Beverages

2.1 Prevalence of lactose intolerance

Lactose intolerance is estimated to affect 33 % of the global population, but the prevalence of the condition varies from country to country. It is also estimated that an average of 75 % of human adults have decreased intestinal lactase activity after weaning (NDDI, 2012).

1. Introduction

Fruit products have their unique identities having large content of micronutrients, polyphenols, vitamins, flavonoids and other nutritional compounds. Characteristic appearance and flavors distinguish among various fruit based products like juice, puree, jam, jelly, squash and other several varieties. Main concern of this fruit processing industry is the stability of the products throughout the post processing storage. Thermal treatment as mean of preservation of these products is the common process implemented so far. It ensures the safety of the product but lacks in retaining the nutritional intact that like of fresh fruit. Today’s consumer demand for minimally processed fruit products and “natural” fruit products tend to think of alternative thermal processing.

High pressure processing (HPP), a relatively new concept compared to conventional thermal processing, also sometimes known as high hydrostatic pressure (HHP), or ultra high pressure (UHP) processing, is a non-thermal food processing method that subjects liquid or solid foods, with or without packaging, to pressures ranging between 50 and 1000 MPa. HPP has already been established itself as an alternative to thermal processing. In food processing it is of great interest due to its ability to inactivate food borne microorganisms and enzymes, at low temperature, without the need for chemical preservatives and it is less detrimental than thermal processes to low molecular weight food compounds such as flavoring agents, pigments, vitamins, etc., as covalent bonds are not affected by pressure. Pressure-treated foods have sensory properties similar to fresh products, which is a major advantage in fruit processing as it matches consumer demand for healthy, nutritious and ‘‘natural’’ products. HPP of fruit products offers the chance of producing food of high quality, greater safety and increased shelf life (Hayashi 1989; Gould 1996; Butz and Tauscher 1998).

1. Algal Biomass

Algae is defined as heterogeneous assemblage of organisms that range in size from tiny cells to giant seaweeds, thus algae mostly are photosynthetic species which include eukaryotes and prokaryotic Cyanobacteria (blue-green algae) and live in aquatic habitats. They are ubiquitous in nature and are found in variety of environments ranging from soil, sand, marshes, brackish water, sea and fresh water. Most of them are capable of manufacturing their own food.

Microalgal research is offering wide potential in food biotechnology and is gaining more attention because of presence of wide range of bioactive and nutraceutical properties and added health benefits.The increasing population is one of the major growing concerns of today’s world. To meet the nutritional requirement of the rising population, researchers are looking for optional sources for food which are easy to cultivate, cost effective and produce large amount of bioactive compounds useful to prevent major diseases. Chlorella is unicellular green alga that is a potential source of nutrients like carotenoids, minerals, vitamins, and polyunsaturated fatty acids. Especially, omega-3 fatty acid and carotenoids have received considerable interests due to their roles in the prevention of chronic diseases. Lutein and zeaxanthin from Chlorella have been shown to be associated with eye health and function. Beta-carotene is known to reduce the risk of CVDs and certain cancers. Animal studies also demonstrated that Chlorella supplementation reduced the serum cholesterol levels.

Similarly, the blue green microalgae Spirulina, possesses diverse biological activities and nutritional significance. Regular consumption of Spirulina fortified food improves immune system by increasing phagocytic activity of macrophages, stimulating the production of antibodies and cytokines, increase accumulation of NK cells into tissue and activation and mobilization of T and B cells. Spirulina have also shown to perform regulatory role on lipid and carbohydrate metabolism by exhibiting glucose and lipid profile correcting activity in experimental animals and in diabetic patients. They were also found to be active against several enveloped viruses including herpes virus, cytomegalovirus, influenza virus and HIV. They are capable to inhibit carcinogenesis due to antioxidant properties.

1. Introduction

Each day, millions of people take a small bag, drop it into a cup, pour in boiling water, and add a dash of milk plus a spoonful of sugar. People start the day with it, end the day with it, and also serve it socially or in times of distress (Herath and De Silva, 2011). The reason behind its popularity is based on the fact that the combination of theanine amino acid contained in tea and melatonin and B-complex vitamins contained in milk offers superior relaxing effects. Furthermore, the harmony of tea’s sweet aroma and milk’s natural sweetness will create a healthy low calorie drink.

Tea is one of the most pleasant drinks consumed by two third of the world’s population. It is not only the most popular and one of the oldest known beverages in the world but also an antioxidative agent available in everyday life which may help to prevent a wide variety of diseases such as cancers and heart diseases (Yang and Landau, 2000; Luczaj and Skrzydlewska, 2005). Tea provides a significant source of phenolic compounds in the diet. While polyphenols have long been of interest for their contribution to the astringenttaste of teas (Ding et al., 1992), research into the health benefits of tea has been actively pursued only in more recent times (Dufresne and Farnworth, 2001; Yamamoto et al., 1997). Even though the results are mixed for the relationship between tea and health in epidemiological and clinical studies, in vitro studies point to a range of mechanisms by which tea phenolics may help to offset chronic diseases such as cancer and cardiovascular diseases (Kris-Etherton and Keen, 2002).

1. Introduction

A confection is sweet tasting delicacies developed using sugar and other carbohydrates with optionally selected chocolate, nuts, fruits, vegetables or gums. Depending on the formulation, the confection may vary from sugar boiled hard lozenges to gum based soft gummy toffees, from chewing gums to mouth melting chocolates. The versatile and broad variation in the product created by differentiating flavours, ingredients and processing has greatly influenced the market demand of these products. Although confection is non-essential commodity but still relished by people of all economic strata and hence creating a great market space and scope of new products.

In confectionery research and development area, current popular sector is functional confections. The sector has been on the trends radar globally, accounting for 8% of the global confectionery market, and most accepted and successful in Japan.

The nutritional richness and the high biological value of dairy milk have made it an important constituent of the balanced human diet. It is associated with better growth, improved status of some micronutrients, cognitive performance, motor development and activity. It is composed of a mixture of nutritive components as well as other bioactive factors such as biogenic amines, conjugated linoleic acid (CLA), with relevant physiological benefits. The consumption of dairy milk and products exert a protective action in human health and have been confirmed in preventing several chronic conditions like cardiovascular diseases (CVDs), some forms of cancer, obesity, immunomodulation and diabetes (Pereira, 2014). The chemical composition of bovine milk consists of 87% water, 4% to 5% lactose, 3% protein, 3% to 4% fat, 0.8% minerals, and 0.1% vitamins (Pereira, 2014).

1. Composition of Milk Fat

Bovine milk contains about 3.5 to 5% total lipid, existing as emulsified globules 2 to 4 μm in diameter and coated with a membrane, casein. The composition of milk fat is somewhat complex. Triglycerides constitute approximately 98% of milk fat, which is found in the milk globule, with the remainder being made up of di- and monoglycerides, phospholipids, cerebrosides, cholesterol, vitamins, tocopherols, carotene, and flavor components. Phospholipids are about 0.5 to 1% of total lipids, and sterols are 0.2 to 0.5%. These are mostly located in the milk fat globule membrane (Jensen et al., 1991). Cholesterol is the major sterol at 10 to 20 mg/dL.

1. Introduction

Dairy industry size and demand precede all other segments of food industry. Reporting milk production of 146.3 million tonnes in 2014-15, India is currently occupying first position in world scenario (NDDB, 2015). In spite of limited shelf-life, milk offers various opportunities of product diversification, processing optimisation and convenient packaging solutions. All categories of dairy products are unique and vary in market value. The operating margins in value-added dairy products are almost twice of liquid milk business due to reduced need of refrigeration and added shelf-life. The appeal and satiety it offers makes them ambrosia for consumers. Baked and fried dairy products (BFDP) are those class of dairy products in which main processing operation is either baking or frying. In addition to preservation of milk solids for longer time at room temperature, manufacture of baked and fried dairy products add value to milk and also provide considerable employment opportunity (Pal and Raju, 2007;Patil, 2011). The characteristic flavour and colour development of the product rely on this unit operation or cooking method and it cannot be replaced. The unique difference in baked and fried dairy products is that in baking dough is prepared and for frying batter is prepared which vary significantly in characteristics (Table 1). The quality of the finished product greatly depends on how the dough or batter is handled.

1. Introduction

Storage is an important part of any food grain processing chain. Storage of raw and processed food grain has been used by humans since time immemorial as a prerequisite for insuring food security due to off time availability, and for holding seed grain for long periods (Pande and Mishra, 2012). After harvesting grains may be required to be stored for long periods before these are marketed or used as food or seed. The grain storage is mainly carried out for three purposes viz (i) to retain a supply of food (ii) to service a trading system and (iii) to retain seed for planting the following season (Hall, 1980). Storage is, therefore, carried out by the producer, trader, processor, and the exporter and at all these levels the methods adopted affect the quality of food stuffs. The length of time grains can be safely stored will depend on the condition it was harvested and the type of storage facility being utilized. Grain storage and handling is a major concern for food grain growers and processers worldwide (Mohan et al., 2011; Pande and Mishra, 2012). Depending upon the condition and uses food grains may be stored in different storage structures using traditional or modern storage methods. Different storage structures are used by farmers with the traditional names like Gumma, Oliya and Jute bag. Caswell (1973) recorded 50 to 60% of insect damage on food grain after six months of traditional storage. A typical range of storage methods encountered in tropics and subtropics region is given in Table 1.

1. Introduction

Antioxidants are considered an important class of nutraceuticals which are associated with health improving properties. Antioxidants are compounds which when present in foods at concentrations lower than an oxidizable substrate, markedly delay or prevent the oxidation of substrate (Halliwell, 1999). They are increasingly applied in food systems to retard the oxidation process, particularly in lipid containing foods (Droge, 2002; Lee et al., 2004). The commercially available solutions to counter food oxidation are predominated by synthetic antioxidants such as butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tertiary butyl hydroquinone (TBHQ), among others, which are increasingly rejected by consumers and legitimized by regulators due to long term health implications (Park et al., 2001). As a consequence, the development and utilization of natural antioxidants as alternatives to synthetic ones have attracted global interest among researchers.

The use of spices and herbs in foods was known since ancient times to modify or to improve the flavor. However, the antioxidant properties of only some of the spices have been recognized. Different spices and their extracts such as turmeric, ginger, fennel, rosemary, and sage, among others, are reported to possess very high antioxidant properties, owing to the content of biologically active compounds, which enables their food application (Madhavi et al., 1996). Exploitation of natural antioxidants in consumer goods is increasingly accepted and will gain momentum due to the rise of green consumerism. In this chapter, an attempt has been made to provide an insight into natural antioxidants and colors. Beginning with the source distribution of natural antioxidants, followed by review of extraction methods for their isolation from plant based matrices and bio-preservative properties in vegetable oils to delay rancidity. Lastly, a thorough collection of literature pertaining natural colors has been presented to potentiate the application of clean label ingredients in food systems. The application of natural antioxidants and colors in food products can vouch the food safety with value addition in terms of their nutraceutical properties.

1. Introduction

India is a land of large varieties of fruits and vegetables due to its vast soil and climatic diversity. India is the second largest producer of fruits and vegetables in the world, with an annual production of fruits 45.5 Million tonnes and vegetables 90.8 Million tonnes. It contributes 10.23% and 14.45% of the total world production of fruits and vegetables (F&V) respectively (NHB, 2010). Though fruits and vegetables are grown only on 7–8% of gross cultivated area, these contribute more than 18.8% of the gross value of agricultural output and 52% export earnings from total agricultural produce. These have a high export potential of 20-30 times more foreign exchange per unit area than cereals due to higher yields and higher price available in the international market (Sen et al., 2012). According to estimates, the per capita consumption of fruits and vegetables in India is only around 46g and 130g which are far below the stipulation of a minimum of 92g and 300g respectively as recommended by the Indian Council of Medical Research and National Institute of Nutrition. The low availability is mainly due to considerably high post-harvest losses. About 15-20% of the fruits and vegetables are wasted every year in the country, due to poor post-harvest management and lack of infrastructural facilities for processing and storage, amounting to a revenue loss of over Rs. 625 billion.

The sensorial, nutritional, and organoleptic quality of fresh produce starts deteriorating after harvest as a result of soon after harvest the altered plant metabolism and microbial growth. The quality deterioration is the result of produce respiration and transpiration, senescence, ripening-associated processes, wound-initiated reactions, development of postharvest disorders, microbial proliferation leading to postharvest quality loss. Therefore, it is necessary to understand the respiration and ripening processes and the physiological and biochemical changes during ripening. The best way to reduce respiratory metabolism is to reduce the storage temperature. All biological processes proceed more slowly at lower temperature (Yahia, 2007). In general, O₂ levels must be reduced to less than 10 % to see a reduction in the rate of respiration. Respiration rate is temperature dependent; so, as the temperature reduces the amount of oxygen required also drops. Therefore, oxygen levels must be substantially reduced at low temperature for it to affect the rate of respiration. It must however, be ensured that O₂ levels do not fall below extinction point as anaerobic respiration and decay may occur. Tolerance to low O₂ varies between species and cultivars and is also time dependent. Commodities may be able to tolerate low O₂ for short periods of time. Low O₂ can also be tolerated when CO₂ is low.

1. Introduction

Product development is a basic activity in the food industry. Each company has a product mix, often including hundreds of products, which are constantly evolving - old products dying, products reaching maturity, products contributing to rapid growth and new products being introduced.

In the food industry, just as any other industry, product and process development is considered a vital part – indeed the lifeblood – of smart business strategy. Failure to develop new and improved products relegates firms to competing solely on price which favours the players with access to the lowest cost inputs (land, labour etc). Product and process development (commonly referred to as product development) is systematic, commercially oriented research to develop products and processes satisfying a known or suspected consumer need. Product development is a method of industrial research in its own right. There are essentially four basic stages in the model product development process.

1. Introduction

Foods are complex biologically and chemically active systems that require close monitoring of their manufacturing, distribution and storage conditions in order to maintain their nutritive value, safety and sensory qualities by suitable chemical. The determination of trace impurities in food system presents considerable difficulties owing to complexity as it contains thousands of major and minor compounds (Nilufer and Boyacio, 2002). The choice of the method of analysis depends on the sample, the analyte to be assayed, accuracy, limit of detection, cost and time to complete the analysis (Aboul- Eneim et al., 2000). The chemical methods employed for food analysis and quality control are generally time consuming and require tedious or destructive sample preparation. For development of the new detection method, emphasis should be on development of simplified, cost-effective and efficient procedures that complies with the legislative requirements (Stroka and Anklem, 2002; Enker, 2003).

The molecular spectroscopy is a fast, accurate, easy and non-destructive technique that can be used as a replacement of time-consuming methods. Near infrared (NIR) spectroscopy has proved to be a powerful analytical tool used in the agricultural, nutritional, petrochemical, textile and pharmaceutical industries (McGlone and others, 2002; Esteban-Diez and others, 2004). Infra red spectroscopy is based on the absorption of infra red light by the substance to be measured. This absorption excites molecular vibrations and rotations, which have frequencies that are the same as those in the infrared range of the electromagnetic spectrum (Pande and Mishra, 2015). This application uses a fiber optic coupled FT-NIR system operating in the 10,000 – 4,000 cm^-1 region in reflectance mode. It involves the analysis and quantification of molecular responses to introduced signals of known energy or frequency. All molecules (e.g. water, glucose, protein) have a definite amount of energy. When alternate energy (e.g. infrared radiation) is introduced, an energy exchange occurs between the introduced energy and the energy contained within the molecule. This is expressed as absorbance (energy is absorbed resulting in a loss of introduced energy), attenuated (energy is scattered resulting in a loss of introduced energy) or emitted (energy is released resulting in a gain on the introduced energy). As individual molecules and molecular groups (e.g. alcohols, nucleic acids, proteins, sugars and fats) have definite energy, by applying external energy of a known amount/type, one can structurally identify, quantify and even determine the natural state of these molecules within complex samples and mixtures.