eChapters

Natural resources are the resources present naturally in the environment. These resources are used by human being for their survival. Minerals, building stones, forests, and various energy resources are known as natural resources. Natural resources have been extracted and utilized since ancient times but as the population increased, the demand of natural resources are increasing day by day.

Polysaccharides comprise several monosaccharide units (more than ten) linked by glycosidic bonds; therefore, they are high molecular weight carbohydrates. They are also called polyanhydrides of simple sugars. The most common monosaccharide unit of polysaccharides is D-glucose. The polysaccharides may differ in their monosaccharide units, molecular weight, chain nature, glycosidic bond types (alpha, beta), and linkages (1-2, 1-3, 1-4, or 1-6). They are tasteless, colorless, amorphous powders that are a little water-soluble. Some may form colloidal solutions. The polysaccharides provide structural stability (structural polysaccharides) to cells, prevent cells and tissues from drying out due to their water-binding properties, and reserve food for the future. Reserved polymeric carbohydrates are osmotically less active and can be stored in large quantities within the cell.
The right and left end of polysaccharides, respectively, are called the reducing and non-reducing ends. Based on the functional aspects, they are grouped in two ways.
• The first way depends on its digestibility—1. Nutrient polysaccharides are (digestible) starch, dextrin, and glycogen, and 2. Structural polysaccharides are (indigestible), chitin and cellulose.
• The second way, depending upon the constituent monosaccharide units, they are 1. Homoglycans (same units), and 2. Heteroglycans (different units).

THE DECLINE OF A COLONIAL CAPITAL TOWN

The Post Independence Scenario

It is believed that it takes more time to build and less to demolish, but strangely, in case of Allahabad, it took less time to build but much more to ruin it. As discussed in the last chapter, the peak was reached in about 34 years from 1868 to 1902, the period from 1903 to 1942 being the most constructive years in the history of Allahabad. From the inception of the High Court in 1868 to the formation of the Muir Central College in 1872, to being the capital of the provinces in 1902, Allahabad was regarded as a front runner in the field of Education and Culture.

The city regarded as a ‘production house’, nurtured talent and produced academicians and administrators, who contributed immensely in the process of nation building. The scenario after 1947 however changed drastically, it seemed, as if the city of Allahabad had exhausted its definite role in the freedom struggle, serving only as a preparatory ground which guided young minds to face the future with confidence. Its literary associations, libraries, university and other schools created an intellectual environment which propelled young talents to national fame. The civil services examinations were successfully cleared by many students of the university in those times, this was a result of quality education and an intellectually surcharged environment.

Independent India had lot of promises to fulfill and great expectations from the citizens. Delhi, the capital of Free India, was the focus of these activities. The emergence of new power centers and subsequent development of business and industrial centers, namely, Mumbai, Kolkata, Chennai and later Bangalore, shifted the focus of development from regional, small cities to these new centers. This quantum jump, saw cities of the like Allahabad, Lucknow, Varanasi, trail behind, as they were suddenly reduced in the current perspective and referred to as places in a historical perspective. Post Independence phase created huge opportunity for talented people, academicians, politicians, members of the judiciary, were asked to participate in the running of the nation. Allahabad’s role probably at this point of time, around 1947, seemed to be receding and the city was beginning to be ignored and conveniently forgotten. It slowly became a museum, with only old tales to tell.

This chapter discusses the decline of Allahabad, particularly institutional decline and also traces the earlier efforts in planning of the city. It is here we look for grey areas which would help in finding the exact causes of the physical decline that beset the city.

Research: The word research is composed of two words “Re” and “Search”.

“Re” - ‘Again or over again or a new’.

“Search” - ‘To examine closely and carefully’ or ‘to test and try’.

Research is a careful, systematic, patient study and investigation in some field

of knowledge undertaken to establish principles / policies.

Science: It is a systematized knowledge derived through observation,

experimentation or any other systematic method or procedure in order to

determine the nature of phenomenon or process being studied or the causes

behind specific events.

Research Methodology: The study of conducting research is research

methodology.

Pure/Basic/Fundamental Research: Gathering, knowledge is termed as

‘pure’ or ‘basic’ research. Just to gather knowledge in order to formulate or

generalize theories or policies. Pure research involves developing and testing

theories and hypotheses that are intellectually challenging to the researcher but

may or may not have practical application at the present time or in the future.

Abstract

Plantbreeding is an ancientart practiced throughselection ofplants fordesirable traits. Over a period of time it has evolved into scientific discipline with various methodologiesbasedon theories and principles ofgenetics. Since the rediscovery of Mendel’s law, there has been accelerated increase in yield of various crop plants due to development of high yielding varieties. Conventional approaches of following phenotypic selection from a variable population in early generation followed by yield testing in later generations have been highly successful in most of the crop species. This coupled with hybrid varieties led to significant increase in food-grain production during later half of the 20^th century. At present manycrops are facing yield plateau asthey have reached their maximum genetic potential. The growing condition is also deteriorating due to changing climate. There is an urgent need among breeders to utilize full arsenal of techniques available to them to sustain crop productivity. Molecular markers and marker assisted selection has come as a boon to the breeders to increase the efficiency ofselection in early generation breeding especially for traits whose phenotypic evaluation is difficult. Further, transgenic technology has the potential to incorporate genes from diverse sources, thus enriching the gene pool from which breeders can search for specific traits. Although at present there is skepticism about transgenic crops among public but this may become a viable strategy in future.

1. Genes and Disease

When various plants such as rice, wheat, tomato and apple are infected with pathogens and cause disease, pathogens are generally different for each host plant type.

Venturia inaequalis, the fungus that causes apple scab, only affects apples. Fusarium oxysporum f. sp. lycopersici which causes tomato wilting, only affects tomatoes and so on.

It is the presence in the pathogen of one or more genes of pathogenicty, specificity, and virulence to the respective host that enables disease development in the host.

1.0 INTRODUCTION

The most significant factors distinguishing organic farming from eco-farming are the existence of production standards and certification procedures. Certification of organic farming is the procedure by which a written assurance is given by the certification agency that a clearly identified production or processing system has been methodically assessed and conforms to the specified requirements. It is a process certification rather than a product certification. Certification and labelling is usually done by an independent body to provide a guarantee that the production standards are met.  In case of organic products, certification is an acknowledgement that the products are produced according to organic production standards of certification bodies or associations or of the country. Organic production system is a land use system in accordance with set standards to the location specific conditions by integrating practices that foster cycling of resources, promoting ecological balance and conserve biodiversity. The prime principles of organic farming are,

Globally, agriculture productivity is challenged by abiotic and biotic stresses, but abiotic stresses in particular (Gong et al., 2013) affect spreading of plant species across different environmental zones (Chaves et al., 2003). The changing climate is expected to worsen abiotic factors globally and adaptation strategies need to be established for target crops to specific environments (Beebe et al., 2011). Connect between different stress factors will likely surge harm to crop yields (Beebe, 2012). Soil salinity is a major environmental constraint to agricultural productivity (Greenway and Munns, 1980; Rhoades and Loveday, 1990). High concentrations of different types of salts, including chlorides, carbonates, and sulfates of magnesium, calcium, potassium, and sodium, characterize different saline soil areas around the world. Moreover, for each type of naturally occurring salinity, constantly changing environmental conditions, such as temperature and precipitation, as well as agricultural practices cause rapid modifications in levels of salinity and salt distribution patterns. Sodium and chloride are the predominant ions in the vast majority of saline areas.

During evolution, various species of plants, known as halophytes, readapted to life in high-salinity environments, but a large majority of plant species grown in non-saline areas are salt-sensitive (referred to as glycophytes). These glycophytic plants, including the majority of crop species, differ greatly in their tolerance to salt stress (Greenway and Munns, 1980; Flowers and Colmer, 2008).

Over the period of time, the dairy sector has added distinct significance to growing Indian economy. India contributes nearly 19.54% to the global annual milk production with an impressive upliftment of 3.6% in yearly production rate as per the latest available data from FAO International.

Agro-inputs are either biological or chemical or inorganic compounds used in the production of agricultural and allied products. Some of the agro-inputs used in India are :

• In-organic fertilizers
• Pesticides which include insecticide, fungicide, nematicide and herbicide
• Seeds which include varieties, hybrids and genetically modified plant materials
• Vegetatively propagated planting materials
• Bio-fertilizers
• Organic inputs which include compost, vermicompost, enriched farm yard manure, oil meals and farm yard manure
• Bio-pesticides
• Bio-control agents
• Plant Growth regulators
• Micro-nutrients
• Farm machinery and agricultural tools and implements
• Animal feed
• Poultry feed.

The production and distribution of above mentioned agricultural inputs create agri-business opportunities. The agricultural input production inputs and distribution firms may be big companies like Madras Fertilizers, SPIC, FACT, EID Parry, Monsanto, Syngenta or MAHYCO and the like. They may also be small business firms like vermicomposting, coir pith decomposing.

Nutritional significance of tannins in feeds and fodders

Tannins are widely distributed in many types of browse plants, tree leaves, forages and feed ingredients. The structure of tannins are not completely well defined but they are polymers of phenolic and aliphatic hydroxy compounds. Although tannins and related polyphenols are considered as protein binders and, protease and cellulolytic inhibitors, they can also exert beneficial effects on rumen fermentation. There are two forms of tannins viz., hydrolysable and condensed. Hydrolysable tannins are considered to have less deleterious effects on protein digestion since these types of tannins might get hydrolysed under acidic gastric condition and release bound proteins. Attempts have been made to utilize this to advantage in protection of proteins from rumen degradation.The condensed tannins are resistant to hydrolytic degradation. The reduction in digestibility due to condensed tannins is not clear whether it is due to specific interference with cellulases or precipitation of proteins.

Certain feed ingredients have been incorporated as a source of tannins, in the diets of ruminants to benefit ruminal fermentation and performance. Inclusion of Bengal gram husk as a source of tannins in the diet of sheep prevented potentially digestible carbohydrate in the rumen, but digested post ruminally (Sreerangaraju et al., 2000).

Rural Development: The economic betterment of people as well as greater

social transformation. The efforts for rural development comprises the direct

and indirect involvement of people at the grass root level for development of

agriculture/animal husbandry, industry, communication, education, health and

allied sectors.

Democratic Decentralization: To ensure people’s participation in rural

development programmes, democratic decentralization has been the core

principle of the government since 1957. In the process, people’s participation

in all developmental activities has been the unique phenomena to find out the

solutions of their problems.

Panchayat Raj: On the principle of democratic decentralization, Panchayat

Raj institutions were launched in 1957 as per the recommendations of Balwant

Rai Mehta Committee. Under this, the government has derived its authority

from the people, and distribute to some extent to the people for decision and

action at the local level called Panchayat Raj.

Introduction

Nematodes are cosmopolitan and ubiquitous in occurrence. These have been reported in all kinds of ecological niche. Accordingly, different kinds of nematode fauna had evolved with distinct morphological features and physiological variability. However, development and perception keep changing with the ambient environment. Agriculture has progressed with leap and bounce as human being has managed this to its maximum utility. The fast changes in agriculture definitely influenced the ecological niche and affected the flora and fauna. Consequently, specific and unspecific kind of relation evolved between host and parasite. With the thumb rule of ecological balance or homeostasis. In the dynamic Mother Nature, multispecies heterogeneous complex is sustained and nature do not perpetuate homogeneity.

Food productivity is decreasing due to detrimental effects of various biotic and abiotic stresses; therefore minimizing these losses is a major area of concern to ensure food security under changing climate. Environmental abiotic stresses, such as drought, extreme temperature, cold, heavy metals, or high salinity, severely impair plant growth and productivity worldwide. Drought, being the most important environmental stress, severely impairs plant growth and development, limits plant production and the performance of crop plants, more than any other environmental factor (Shao et al., 2009). Plant experiences drought stress either when the water supply to roots becomes difficult or when the transpiration rate becomes very high. Available water resources for successful crop production have been decreasing in recent years. Furthermore, in view of various climatic change models scientists suggested that in many regions of world, crop losses due to increasing water shortage will further aggravate its impacts. Drought impacts include growth, yield, membrane integrity, pigment content, osmotic adjustment water relations, and photosynthetic activity (Praba et al., 2009). Drought stress is affected by climatic, edaphic and agronomic factors. The susceptibility of plants to drought stress varies in dependence of stress degree, different accompanying stress factors, plant species, and their developmental stages. Acclimation of plants to water deficit is the result of different events, which lead to adaptive changes in plant growth and physio-biochemical processes, such as changes in plant structure, growth rate, tissue osmotic potential and antioxidant defenses (Duan et al., 2007 and Shakeel et al., 2011).

Orthogonal designs provide an efficient framework for arranging treatments and sources of variation so that their effects can be estimated independently. This chapter introduces contrasts, orthogonal contrasts, and the concept of orthogonality in experimental design. Orthogonality helps prevent the effects of different factors from becoming entangled and facilitates systematic statistical analysis. The chapter discusses three basic experimental designs: Completely Randomized Design, Randomized Complete Block Design, and Latin Square Design. Their principles, applications, and suitability for forestry and agricultural experiments are explained. Examples involving seedlings, tree species, fertilizers, chemicals, wood pieces, and seeds demonstrate how appropriate design selection can reduce heterogeneity and improve experimental precision.

Abstract

Sustainable agriculture or farming is one that contributes to the overall objective ofsustainable developmenti.e. to meetthe present needs withoutcompromising the ability of the future generations to fulfill their own food needs and related demands from the land. A farming system is a complex, interrelated matrix of soils, plants, animals, power, implements, labour, capital and other inputs controlled by farming families and influenced to varying degrees by political, economical, institutional and social forces that operate at any levels. Research witha farmingsystems perspective has variousobjectivesranging fromincreasing the body of knowledge about farming system. The whole farming rather than the individual crops/enterprises need to be considered in the decision making under the farming systems approach. This is a multidisciplinary whole-farm approach and very effective in solving the problems of small and marginal farmers. Farming systems approach in analyzing the problems of agriculture is gaining lot of importance in recent years. Such a study would throw light on the problems associatedwith different farmingsystems and enable theacademicians and policy makers to formulate and implement appropriate policies for a balanced and integrated agricultural development.

A canal of approximate discharge of less than 80 cumecs (3000 cusecs) discharge may be called a medium or low capacity canal).

3.1 Mehboob Section

A Mehboob Section is only a modification of best trapezoidal section by making its complete bottom circular as shown in figure 3.1. Also see figure 1.6 and para 1.7. That is why these canals are also known as canals of zero bed width, or trapezoidal canals with curved bottom, or cup shaped canals.

But these cannot be called as triangular canals with curves, as often spoken. In fact it is a truncated triangle circumscribing the semi circle. Trapezium is also a truncated triangle circum scribing a circle.

More accurately it can be said as a combination of semi circular and best trapezoidal section so as to take full advantage of their hydraulic efficiency and practicability.

This is such a beautiful section that the designer can never commit a mistake, even if he wants to commit a mistake. The dimensions are so geometrically fixed that no one can play with any dimension.

The value of this section was realised for the first time by Er S I Mehboob (1943) in his Punjab Irrigation Branch Paper No.260" Lining of Canals". There after this canal section became well known as Mehboob Section after his name. He also stated that the most economical section i.e. the maximum area for the minimum perimeter is when the centre of the arc is at the full supply line of the section. This is also evident in figure 1.6. This is also the condition for all best hydraulic sections. This section is also useful to a higher silt carrying capacity than a wide shallow one..

11.1 Introduction

The entire amount of water that is diverted at the canal head regulator does not reach at the field for use of irrigation. Major amount of it is lost on way during its movement in the canal systems. During the passage of water from main canal to outlet at the head of the water course, water may be lost either by evaporation from the surface or by seepage through the peripheries of the channel. These losses are sometimes very high, and may go up to 50 % of the total water diverted into the main canal. Evaporation losses are low and may go to a maximum of about 7 percent.of total losses. The major loss of water in the conveyance system is the seepage loss. Seepage loss depends on the channel geometry and evaporation loss is proportional to the area of free surface. In determining the designed channel capacity, a provision of these water losses must be made. The provision for the water lost in the watercourses and in the field however, already made in the outlet discharge factor, and hence no extra provision is made on that account. However, excluding the above two losses, there is operational loss which when added to the evaporation and seepage losses, the total losses goes up the maximum 50 percent level. The operational loss includes spillage, over-toping, leakage through rodent holes, dead storage, initial infiltration and evapotranspiration from the vegetation along the watercourse. Evaporation and seepage losses of the canals are discussed below.

Introduction

Biological control of plant pathogens is currently accepted as a key practice in sustainable agriculture. Plant parasitic nematodes and mycorrhizal fungi are commonly found inhabiting the same soil and colonizing roots of their host plants. These two groups of microorganisms exert a characteristics, but opposite effect on plant health. The potential role of mycorrhizal fungi as biocontrol agent for the control of nematode plant diseases has recently received considerable attention. The literature on the various aspects of VAM research such as interaction of VAM- mycorrhizal fungi with nematode pathogens (Sikora, 1995, Pinochet et al. 1996), biotechnology and future of VAM commercialization (Wood and Cumming, 1992) and trends in mycorrhizal research (Sahay et al. 1998) has been reviewed. The damage due to nematodes diseases is generally decreased in mycorrhizal fungi has shown an antagonistic influence on the population of plant parasitic nematodes (Nagesh et al. 1999, Kantharaju et al.

Introduction
Cocoa, Theobroma cacao L. popularly known as ‘Food of Gods’, the original source of chocolate, is indigenous to tropical humid forests on the lower eastern equatorial slopes of the Andes in South America. Cocoa spread to all over the tropical regions of the world from 18^th century onwards and is now grown in 58 countries covering 6.9 million ha worldwide, producing 4 million tons of cocoa. Cocoa is an important agricultural commodity and the key raw material in chocolate manufacture. Unlike large, industrialized crops, 80 to 90% of cocoa comes from small, family-run farms, with approximately five to six million cocoa farmers worldwide. Total production has increased by 13% from 4.3 million metric tons in 2008 to 4.8 million metric tons in 2012. This represents an average year-over-year production increase of 3.1%. This rate of increase may slow in the coming years, as cocoa trees are sensitive to changing weather patterns. Periods of drought and of excessive rain or wind can negatively impact the yield, and will continue to fluctuate as climate change intensifies. Most of the world’s cocoa is produced in West Africa (70%) followed by Asia and Oceania (15.6%) and Latin America (14.1%). World leaders in cocoa bean production are Ivory Coast, Ghana, Indonesia, Nigeria, Cameroon, Brazil, Ecuador, The Dominican Republic, and Malaysia, supplying 90% of the world production.