eChapters

Human societies over the ages have depleted natural resources in different ways and degraded their local environments. Indiscriminate cutting down of trees and accelerating the construction works lead to global warming and climate change. Climate scientists believe that human-induced deforestation is responsible for 18-25% of climate change. Accumulation of greenhouse gases in the lower atmosphere is the main cause of global climate change. The concentration of these gases in the earth’s atmosphere is increasing, mainly due to deforestation and the combustion of fossil fuels which release carbon dioxide.

The earth receives heat energy constantly from the sun through radiation. Some of the heat is absorbed and some is reflected. Carbon dioxide works like an invisible blanket that wraps around the earth and traps the heat inside, similar to the function of a greenhouse. A greenhouse is a structure that is used in colder climates to grow plants. Even when outside temperatures drop below freezing point, greenhouses are still warm enough inside to grow plants. Greenhouses are made of glass, which allows solar radiation to enter. The heat is trapped inside the greenhouse, allowing plants to grow all the year round. Increasing concentrations of carbon dioxide in the earth’s atmosphere insulate it like a greenhouse, leading to a gradual warming of the earth’s atmosphere. Carbon dioxide is the major greenhouse gas, but there are others as well, including methane and nitrous oxide.

Agroecology is an integrated approach to farming that seeks to harmonize agricultural practices with ecological principles. It emphasizes biodiversity, sustainability, and the health of ecosystems, advocating for farming systems that work with nature rather than against it. This article explores the principles and practices of agroecology, its historical roots, and its contemporary applications. It examines the benefits and challenges of adopting agroecological methods, including case studies from various regions. The article also discusses the policy and social dimensions of agroecology, highlighting the role of community participation, knowledge sharing, and supportive policies in promoting agroecological transitions. By understanding and implementing agroecology, farmers and stakeholders can contribute to a more sustainable and resilient agricultural future.

Introdction

Fruits are an important supplement to the human diet, as they provide minerals, vitamins and fiber required for maintaining good health. Fruits are also rich in phytochemicals (7, xanthophylls, polyphenols, flavonoids, phenolic acids, organic acids etc.) which possess good antioxidant properties. India’s diverse climatic conditions ensure availability of almost all the varieties of fresh fruits and vegetables. According to FAO (2021), the country ranks first in the production of bananas (26.45%), mangoes (including mangosteens and guavas) (43.80%) and papayas (39.30%). The scenario of horticulture crops in India has become very encouraging. The percentage share of horticulture output in agriculture has become 33 per cent (Anonymous 2021). India has witnessed increase in horticulture production over the last few years. Significant progress has been made in area expansion resulting in higher production. Over the last decade, the area under horticulture grew by 2.1 per cent per annum and annual production increased by 3.9 per cent. During 2020-21, the production of horticulture crops was 334.60 million tonnes from an area of 27.74 million hectares. The production of fruits has increased from 76.42 million tonnes in 2011-12 to 108.34 million tonnes in 2022-23 (Agricultural Statistics at a Glance 2022). The area under cultivation of fruits stood at 7.05 million hectares. The total production of fruits in the year 2020-21 was highest in case of Andhra Pradesh (17.70 million tonnes) followed by Maharashtra (11.73 million tonnes) and Uttar Pradesh (11.23 million tonnes) (Anonymous 2021). India now is the second largest producer of vegetables and fruits in the world. The country ranks at first position in the production of banana, mango, lime and lemon, papaya and okra. The area and production of fruits in India is presented in Table 1. The fruits namely banana, mango, citrus, papaya, guava, grapes, apple, pineapple and sapota account for more than 85 per cent of the total production of fruits. The other fruits which are produced in India are almond, walnut, jackfruit, bael, ber, custard apple, kiwi, passion fruit, peach, pear, plum, strawberry etc.

1. An imaginary line joining the points of equal elevation on the surface of the earth represents_____________. (Contour lines)
2. The vertical distance between consecutive contours lines is called_____________. (Contour interval)
3. When measured with a compass, the line of sight that run midway between due North and due West has a bearing of_____________. (N 45 degree W)
4. A survey of a large area which consider the earth’s curvature is called a _____________ survey. (Geodetic)
5. The distinctive feature of topographic maps is the_____________ of the land. (Shape or Contour)
6. The colour used to depict fence lines and important roads on a topographic map is _____________ and_____________. (Red and black)
7. A surveyor’s chain is divided into links and each link is_____________ long. (0.66 feet)
8. A body of water on a topographic map is presented by_____________ colour. (Blue)
9. On a topographic map a ploughed field would be sown as_____________ colour. (White)

This chapter attempts to travel the timeline and dissect historical perspectives of vaccination. Vaccine that protects and shields from numerous dangerous diseases (vaccine-preventable diseases; VPD) is an important area of research and development. Considering that vaccine has been very useful in successfully combating numerous infectious diseases in the past 200 years, they are considered as a historical turning point in the field of public health and medicines. Critical illnesses like the smallpox and wild polio (virus types 2 and 3) have mostly been eradicated as a result of mass immunisation programmes worldwide. Research, collaboration and widespread vaccination campaigns were necessary in vaccination efforts to control and ultimately eradicate infectious diseases. Biotechnological research has progressed to a level where producing recombinant vaccines is feasible. Research and development efforts on therapeutic vaccines are ongoing. Vaccine research in recombinant DNA/RNA technologies and therapeutic vaccinations for specific illnesses seem to be the future. This article offers a comprehensive history of vaccination since inception to its present forms, with future projections. Beginning with the variolation techniques in the early 17th century, it discusses the important turn of events from its discovery to the continued advancements and inventions till the covid-19 vaccine. Alongside the detailed core aspect, the chapter also describes the benefits of the one health approach with the zoonotic diseases in focus.

India achieved food security through the adoption of high-yielding seed varieties, chemical fertilizers to boost soil nutrition, and pesticides to protect crops. However, this progress came at an environmental cost, including excessive fertilizer use that harmed both human and ecological health.
Natural farming, or prakritik kheti in Hindi, represents a traditional yet evolving approach to agriculture that promotes ecological balance, self-reliance, and sustainability. It is deeply embedded in India’s agricultural legacy, where for centuries, farming was done without synthetic chemicals or mechanization. Today, it is gaining renewed importance as a viable alternative to input-intensive farming, offering solutions to challenges like soil depletion, falling groundwater levels, rising costs, and environmental degradation.
Natural farming operates on the belief that nature is inherently self-sustaining. It avoids the use of chemical fertilizers, pesticides, and GMOs, instead relying on natural, locally sourced inputs to boost soil health and crop yield. This method emphasizes collaboration with nature rather than domination over it. Subhash Palekar’s “Zero Budget Natural Farming” (ZBNF) model, based on low-cost and chemical-free techniques, has been especially appealing to small and marginal farmers.
Soil health is central to natural farming. Techniques like mulching with crop waste, applying jeevamrit (a fermented solution of cow dung, urine, and natural additives), and treating seeds with bijamrit are widely used. These enhance soil microbes and improve its capacity to retain water and nutrients. Natural farming also promotes biodiversity through intercropping, crop rotation, and the use of indigenous seeds.

Cinnamon, commonly known is a highly valued spice crop obtained from the inner bark of the tree Cinnamomum verum, belonging to the family Lauraceae. It is native to Sri Lanka and Southern India, and widely cultivated in Kerala Tamil Nadu, and Karnataka. The spice is used globally in culinary, medicinal and aromatic industries. It thrives well in tropical humid climates with well-drained loamy soils and is generally propagated by seeds or cuttings. Though relatively hardy, cinnamon can be affected by a few key pests, especially when grown in monoculture or under poor management.
Biology: There are two adult forms clytia and dissimilis. The clytia are blackish brown wings with a series of arrowhead shaped white spots on the outer margin, and the dissimilis are black winged with elongated white spots and a series of marginal arrowhead shaped spots. Adults lay spherical, waxy looking, and orange-yellow colored egg singly on the upper and lower surfaces of young leaves. The emerging larva resembles bird droppings (defensive mimicry) at the initial stages. The fully-grown larvae are pale yellow with dark stripes on the sides. There are five larval instars, and the larval period lasts for 11–17 days. The elongated, brownish-black pupa is joined to the host plant’s stem by silky supports at the rear end. The pupal stage is 11–13 days long. The life cycle is completed in 24-36 days (Singh et al., 1978).

Introduction
Heart failure can develop as a complication of almost all congenital and acquired cardiac diseases in dogs and cats. Cardiac disease is a significant global health concern, impacting both humans and domestic animals, particularly dogs. In the animal kingdom, the cardiovascular system consists of essential components, including the heart, veins, arteries, and capillary beds. Its proper function depends on complex mechanisms, such
as the atrioventricular valves (mitral and tricuspid) and the semilunar valves (aortic and pulmonic), which ensure that blood flows in only one direction through the heart. The activity of the cardiovascular system, including heart contraction rates and strengths, as well as blood vessel diameter adjustments, is regulated by the autonomic nervous system (both sympathetic and parasympathetic branches) and various hormones.
The strength of ventricular contractions is influenced by several factors, primarily enddiastolic volume (preload) and myocardial contractility (inotropy). Preload is the amount of blood in the ventricles just before they contract, while contractility refers to the ability of the heart muscle fibers to contract. Preload is determined by the difference between the end-diastolic pressure in the ventricle and the pressure in the pleural space, adjusted for the
stiffness of the ventricular myocardium. This pressure is influenced by the ratio of blood volume to the heart muscle’s compliance. Low-pressure volume receptors in the heart and large veins primarily regulate preload. When these receptors detect increased blood volume or vein distension, they trigger responses such as increased urine production and vein dilation, which help reduce blood volume and lower venous pressures. Increased enddiastolic volume (preload) stretches the ventricular wall, enhancing contraction strength through the Frank-Starling mechanism, or Starling’s law of the heart. This stretching activates receptors in the atria and ventricles, leading to the release of natriuretic peptides like brain natriuretic peptide (BNP) from the ventricles and atrial natriuretic peptide (ANP) from the atria) These peptides promote natriuresis, relax smooth muscle, and counteract
vasopressin and angiotensin II. In dogs, levels of BNP and NT-proBNP are directly related to cardiac stretch.

Table 6.1 and table 6.2 shows the Gross Value Added (GVA) of poultry sector in Indian economy. The GVA from poultry sector in year 2017-18 at current price was Rs. 32844 Crore and Rs. 101913 for eggs and meat respectively.

In scientific terms, an aquarium is an artificial aquatic environment designed for the housing, observation, and study of aquatic organisms. It may vary in size from small domestic tanks to large-scale installations used in public aquariums and research institutions. Aquarium science is an interdisciplinary domain combining principles of biology, ecology, chemistry, engineering, and aesthetics to develop and manage these controlled systems. The tradition of keeping fish dates back to ancient Mesopotamian and Roman times, where small containers were used for ornamental or ceremonial purposes.
The modern aquarium evolved during the 19th century with innovations in glass production and filtration technologies. Today, aquariums are widely utilized for education, research, and recreation. In classrooms, they help demonstrate ecological and biological concepts, while researchers use them for behavioral and environmental studies. For enthusiasts, aquariums offer a calming and decorative pastime. Economically, the aquarium trade has expanded significantly, with India becoming a major contributor to the global ornamental fish market, driven by its rich aquatic biodiversity and growing export capacity.
HISTORY AND EVOLUTION OF AQUARIUM KEEPING
The concept of aquariums has ancient roots, dating back approximately 4,500 years to the Sumerians. The Romans later maintained fish for both sustenance and amusement, while the practice of breeding ornamental fish originated in China and spread to Japan. However, it was not until the 19th century, when the interdependence between oxygen, plants, and aquatic animals was better understood, that aquarium-keeping became systematically developed.

Introduction
Aquaculture is the farming of aquatic organisms, which includes fish, mollusks, crustaceans, and aquatic plants. Over the past forty years, aquaculture has played a significant role in increasing the global supply of fish for human consumption, leading to a marked rise in worldwide fish production. Nearly half (49.3%) of the world’s food fish are currently farmed for aquaculture (FAO, 2023). The proportion of inland fisheries and aquaculture in India’s overall fish production has increased from 46% in the 1980s to over 85% in recent years, resulting in the country with the second-largest aquaculture production. Fishing is a thriving industry with a wide range of resources and enormous potential in India. It is also a highly significant economic activity. Aquaculture may be the solution to ensuring global food security because fish can produce significantly more biomass per unit surface area than terrestrial animals. Aquaculture has a significant impact on world food security and is also considered a potential factor for the pollution of vast marine resources. The application of eco-friendly aquaculture methods can help the aquaculture industry thrive sustainably by reducing its negative effects on the environment. In the twenty-first century, biotechnology is becoming a crucial technology for long-term sustainability management and protection (Cantor, 2000).

INTRODUCTION
The engine is the core of a tractor, providing the essential power required for all its functions. Typically, a tractor engine is a four-stroke internal combustion engine that operates on diesel, although some models may use gasoline. The engine consists of several integral components that work together to generate power and ensure smooth operation. These parts include the cylinder block, which houses the cylinders where fuel combustion occurs; the pistons, which move within the cylinders to convert the energy from combustion into mechanical motion; and the crankshaft, which transfers the piston’s motion to the transmission. The valve system regulates the intake of air and fuel, as well as the exhaust of gases, ensuring efficient combustion. The fuel system, made up of the fuel tank, pump, and injectors, supplies fuel to the engine, while the cooling system, typically water-based, prevents the engine from overheating. Furthermore, the lubrication system ensures proper lubrication of all moving components to reduce friction and wear. The starter motor and battery are responsible for initiating the engine’s operation, and the exhaust system directs exhaust gases away from the engine. Together, these components enable the tractor to generate the power needed for a wide range of agricultural and industrial tasks.
A tractor engine is designed to deliver high torque at low speeds. It is an internal combustion engine that primarily operates on diesel, compressing and burning the fuel to generate mechanical motion. Due to the engine’s complex structure, it is composed of several key components. The following list outlines the major parts that make up a tractor engine:

Biofuel crops play a crucial role in the global transition towards renewable energy. With increasing concerns about climate change and energy security, biofuels have emerged as a viable alternative to fossil fuels. However, their economic viability is influenced by various factors, including production costs, market demand, government policies, and environmental implications. The United States has been the most prominent fuel ethanol producer since 2007, followed by Brazil. Together the United States and Brazil account for 84% of the global ethanol production. European Union, China and Canada are the other leading fuel ethanol producers. Fuel ethanol production and consumption continue to rise, regardless of variations in crude oil prices. The United States is the largest producer, generating 60 billion liters primarily from corn, while Brazil follows with 33 billion liters, mainly derived from sugarcane (https://www.statista.com.) Ethanol production in India started in 1938 with recommendations to convert molasses into alcohol, eventually resulting in the enactment of the Power Alcohol Act in 1948. The Ethanol Blending Programme (EBP), introduced in 2003, mandated a 5% ethanol blend (E5). However, due to supply shortages in 2004-2005, the blending requirement was made optional. In the 2013-14 period, a total of 38 crore liters of ethanol was procured for blending with petrol. This amount significantly increased to 567 crore liters in the Ethanol Supply Year (ESY) 2022-23, achieving an ethanol blend level of E11.7. Acknowledging the substantial progress in the ethanol fuel blending initiative for a greener transition and Atmanirbhar Bharat, the government revised the target to E20 by 2025–26 and set an E30 goal for 2030 (NAAS, 2024). The proposed share of E20 is from sugarcane-based ethanol 10%, maize 7% and other damaged food grains 3.0%. The recently reported data during Jan 2025 showed the achievement of 19.6% blending in petrol (PIB, GOI, 2025)

The escalating global threat of drought, characterized by increasing frequency and severity, demands a comprehensive and coordinated response. These prolonged periods of water scarcity not only endanger human lives and erode livelihoods but also inflict lasting damage on fragile ecosystems. Recognizing the scale and complexity of this challenge, a multitude of global initiatives have emerged, uniting international organizations, governments, research institutions, and civil society in a collective endeavor. This chapter will delve into the landscape of these crucial efforts, exploring the key organizations driving change, the diverse strategies being implemented, and the pivotal role of technological advancements in mitigating the devastating consequences of drought. By examining the framework of these global collaborations, we aim to provide a comprehensive understanding of the ongoing work to build resilience and ensure a more water-secure future for all.

Textile and apparel defects are commonly classified according to their severity, effect on product performance and influence on visual appearance. Accurate classification supports inspection decisions, corrective action and cost management. Critical defects create safety hazards, breach legal or compliance requirements, or make a garment unusable; affected products must be rejected immediately. Major defects significantly reduce appearance, durability or functionality and ordinarily require correction before sale, although they may not endanger the wearer. Minor defects are small departures from specifications that do not substantially affect usability but may lower perceived quality. Consistent classification enables inspectors to apply AQL criteria objectively and communicate appropriate acceptance, rejection or rework decisions.

Composting explains the biological decomposition of organic materials and its importance for soil fertility, nutrient recycling, and sustainable farm management. The chapter introduces stages and types of composting, including anaerobic, aerobic, and vermicomposting systems, and discusses physical, chemical, biological, economic, and social benefits. Major methods such as Indore, Coimbatore, Bangalore, NADEP, sugarcane trash composting, fermented mixed compost, and crop-residue composting are presented. Factors affecting decomposition, including carbon-to-nitrogen ratio, shredding, moisture, and temperature, are examined. The chapter concludes with vermicomposting, earthworm roles, materials, preparation, developmental phases, and essential conditions required for effective vermicompost production. with emphasis on practical farm-level management practice systems.

Introduction

Walnut is the oldest cultivated fruit in the world (Ozkan and Koyuncu, 2005). Juglans regia L., the Persian walnut, is probably native to a wide region extending from the Carpathian Mountains across Turkey, Iraq, Iran, Afghanisan and southern Russia to northern India. Species of walnuts, genus Juglans, are found in the forests of the eastern and southern parts of the USA, in Mexico and Central America, the Andean parts of Southern America from Columbia to Argentina, the West Indies, Japan, China, southern Asia from India to Turkey and southern Europe to the Carpathian Mountains of Poland (McGranahan and Leslie,1990). The trees are large and tall with round headed canopy. The rather smooth, light coloured, large nuts are free of the hull at maturity. Shell thickness varies from paper–thin to very thick and hard. The Greeks probably obtained J. regia from Persia from where, the seeds were transported to Rome, where they were known as Jovis Glans, or Jupiter’s acorn, from which comes Juglans. From Italy, it spreaded to what is now France, Spain, Portugal and southern Germany. Trees of the species were in England by 1562, and were bought to America by the earlier settelers. The American colonists are said to have called the species English walnut to distinguish it from the eastern black walnut, J. nigra. It is generally prefer to call it Persian walnut as it is associated with the place of origin bit commercially, it is called as English walnut. The term Carpathian walnut is sometimes used to refer to cold hardy Persian walnuts (Forde and McGranahan,1996). The other important species are J. ailantifolia Carr. syn. J. sieboldiana Maxim. (Japanese walnut), J. nigra L. (American black walnut), J. cinerea L. (butternut), J. microcarpa Berlander (Texus Black walnut), J. major Heller (Arizona black walnut), J. californica S. Wats (Southern California black walnut) and J. hindsii Jeps. (Northern California black walnut).

Canopy management is the manipulation of tree canopies to optimize the production of quality fruits. The canopy management, particularly its components like tree training and pruning, affects the quantity of sunlight intercepted by trees, as tree shape determines the presentation of leaf area to incoming radiation. An ideal training strategy centres around the arrangement of plant parts, especially, to develop a better plant architecture that optimizes the utilization of sunlight and promotes productivity. Light is critical to growth and development of trees and their fruits. The green leaves harvest the sunlight to produce carbohydrates and sugars which are transported to the sites where they are needed – buds, flowers and fruits. Better light penetration into the tree canopy improves tree growth, productivity, yield and fruit quality. The density and orientation of planting also impact light penetration in an orchard. Generally, in close planting, quicker shading becomes a problem. An east-west row orientation results in more shading as compared to the western and southern orientation of trees. Strong bearing branches tend to produce larger fruits. The problem of a fruit grower is initially to build up a strong and balanced framework of the trees, then equip them with appropriate fruiting. Obviously, pruning in the early years has to be of a training type to provide strong and stocky framework with well spaced limbs or any other desired shape.

THEORY
    ·    Father of Extension: James Stuart
    ·    Word Extension: Derived from Latin roots “ex”    - Out
                                                              tensio”    - Stretching
    ·    Extension term originated in England as University Extension in 1866.
    ·    The term Extension Education first used in 1873 by Cambridge University.
    ·    Philosophy of Extension (Kelsey and Hearne, 1967): How to think.
    ·    Binet test: Intelligence test (IQ).
    ·    Function of Extension: Change in Attitude, Skill and Knowledge of an individuals.
    ·    Extension Education Process:  Extension education is a participative and continuous process.
    ·    Learning Situation: It is a condition or environment in which all the elements necessary for promoting learning are present. 
    ·    Elements of effective learning situations in Extension are: