eChapters

There is no better engineering than life.

What is life - is a perennial question. Life is defined in different ways depending upon who is defining it. Biologists define life using a list of characteristics, such as metabolism, evolution, homeostasis, constant transformation, genetic information, etc. Life has been defined as self-maintaining and self-producing systems. Physicist Erwin Schrödinger (1), argued that living organisms escape the destiny of disordered equilibrium because they are able to take up ‘orderliness’ from their environment. Philosophers have defined life from different angles. They say that life can only be understood fully from an ‘insider’ perspective.

Life is not a random collection of extinct molecules. It is a process of dynamic renewal; everything in life is constantly turning over and renewed. Life exists in diverse forms. Each form is specialised to survive and reproduce in its particular niche.

One understands life from one’s own perspective. For some, life is an ‘objects in flux’ that constantly exchanges matter with the environment. It is systematic material exchange into an organized body. Then there is a view that says that all living organisms deserve moral consideration. All living organisms, however, do not have equal moral significance; vertebrates, for various reasons, deserve more moral consideration than would bacteria or plants. Then there are myriad religious ways to define life. The simplest is “God created the world and all living organisms.” No further questions, accept or reject the hypothesis.

Abstract

High precision Geodetic Global Positioning System measurements have become important for studying present-day tectonics in active orogenic belts such as the Himalayas. Geodetic Global Positioning System measurements in the Darjiling-Sikkim Himalayas (DSH) during 2000-2004 indicate that the frontal part of the Darjiling Himalaya is locked to the Indian plate and statistically negligible shortening is accumulating there at present. While this observation is in conformity with observations made in Nepal to the west of the DSH, it differs in the fact that about ~ 12 mm/yr of convergence is accommodated in the DSH and the western Bhutan Himalayas as opposed to about ~ 20 mm/yr in Nepal Himalaya. About 16 mm of convergence is accommodated in the Arunachal Himalaya, to the east of DSH, of which about 6 mm is accommodated in the Lesser Arunachal Himalaya. These observations indicate that there is a fair amount of heterogeneity in the way convergence is accommodated along the length of the Himalayan arc and the Himalayan seismic hazard estimations need to account for this. Seismicity patterns in the DSH indicate that active deformation in the area is driven by strike-slip as well as thrust tectonics. Strain accumulation in the DSH during 2000-2004 appears to be dominated by strike-slip tectonics in the region and about ~ 4-5 mm/yr of sinistral strike-slip is observed along a NNE-SSW trending near-vertical fault identified in the area (named as the Gish transverse fault).

Linkage and Crossing Over

Crossing over may produce recombinant phenotypes.

Bateson and Punnett discovered two traits that did not assort independently.

Morgan provided evidence for the linkage of several X-linked genes and proposed that crossing over between X chromosomes can occur.

A chi square analysis can be used to distinguish between linkage and independent assortment.

Creighton and McClintock correlated crossing over that produced new combinations of alleles with the exchange of homologous chromosomes.

Crossing over occasionally occurs during mitosis. Genetic Mapping in Plants and Animals

The frequency of recombination between two genes can be correlated with their map distance along a chromosome

Alfred Sturtevant used the frequency of crossing over in dihybrid crosses to produce the first genetic map.

Trihybrid crosses can be used to determine the order and distance between linked genes.

Interference can influence the number of double crossovers that occur in a short region.

Globally, organic oilseeds constitute an important element in organic production. Their products are important feedstuffs (oilcake) and also relevant for human consumption (soya products, oils), and demand for these is continually growing. Almost half of the global organic oilseed area is occupied by soybeans, and another almost 20% is for sunflower seeds and sesame. Rape and turnip rape constitute about 6% of the organic oilseed area. Oilseeds are of pivotal significance in the Indian agricultural economy supporting income of millions of farmers practicing mainly rainfed cultivation. Nine annual oilseed crops are cultivated in India that includes groundnut, rapeseed-mustard, soybean, sunflower, sesame, niger and safflower that are edible and non-edible oilseed crops include castor and linseed. Organic agriculture is one among the broad spectrum of production methods that are supportive of the environment. The principal method of organic farming includes crop rotation, green manures and composts, biological pest control and reduced tillage. The performance of annual edible oilseed crops and development of package in relation to organic management for sustainable agriculture are discussed in this chapter.

1. Introduction

In India, both annual and perennial edible oilseed crops are cultivated. Annual edible oilseed crops include groundnut, rapeseed-mustard, soybean, sunflower, sesame, niger and safflower. India, the 4th largest vegetable oil economy in the world, stands first in the production of castor, sesame, safflower, and niger oils, whereas second in groundnut, third in rapeseed mustard, fourth in linseed and fifth in soybean oil. About 14 million farmers are engaged in oilseeds production and another million in their processing. Whereas, the perennial edible oil seed crops include oil palm and coconut. Edible oils are also produced domestically from secondary sources such as rice bran, cotton seed, corn, and other tree-borne oilseeds (TBOs), besides some minor oil producing species of forest origin.

Abstract

This paper presents a kinematic analysis for explaining the spatial and temporal variations of deformational structures in the Cuddapah Proterozoic orogenic belt, South India. This belt shows virtually undeformed, flat-lying sedimentary rocks in its western margin, whereas strongly deformed and folded rocks in the eastern boundary. The structural variations indicate increasing deformation in the east direction, implying a relative tectonic convergence from the east side. Based on the corner flow theory, we use a viscous model to determine the heterogeneous strain field in the asymmetric convergent zone, and explain varying deformations from the foreland to hinterland. According to this model, the strain field in the hinterland part varies in a pulsating manner with progressive crustal thickening, giving rise to multiple deformational structures in the course of a single continuous tectonic movement. We also studied the strain field in finite element models considering the gravity forces, and obtained similar results. The foreland vergence of deformational structures in the Cuddapah belt indicates a top-to-west horizontal shear during the overall horizontal contraction. Our numerical models show that this horizontal shear component in the foreland region is likely to be associated with a vertical shear component in the hinterland.

4.1 Agroeconomic Features of Manipur in Brief
Nestled in the North-Eastern region of the India sub-continent, Manipur is a beautiful state located between 23°81’ N to 25°68’N latitude and 93°03’E to 94°75’E longitude an area of 22,327 sq. km. and sharing an international boundary with Myanmar in the East which also lies to its south along with Mizoram. It is bounded by the Cachar District of Assam in the West and to its North lies Nagaland.
Physio-graphically, Manipur is one of the most enchanting place in the country. It can be broadly classified into three well defined geographical region viz. the hilly region, the central plain or the Manipur valley and the Jiribam plain. The hilly region of Manipur covers about 90% of the total land area of the state. It stretches mainly from North to South or North-South parallel folds with an altitude varying altitude of 833m to 3030m above MSL. The Manipur valley is situated in the central part in Manipur covering an area of 1843km2 which account for about 9% of total land area of the state having an oval shaped elevated plain surrounded by hilly on all sides and extended about 58 km from North to South and 31 km from East to West. The central valley has an elevation ranging between 700 m and 800 m above MSL. About 70% of the total population of the state resided in the central plain of Manipur. The whole valley slopes from North to South. The Jiribam plain lies beyond the Manipur Western hill tract covering an area of 1% of the land area. The central valley along with the Jiribam valley situated at a lower altitude of 400 m in the southwest part of the state outside the western hill ranges of Manipur occupies 11.72 percent of the total geographical area of the state. The rest of the state is hilly. Manipur is endowed with a wide range of climatic, physiographic and geological conditions resulting in the formation of different kinds of soils.
4.2 Climate
The impact of terrain diversity, altitudinal variation and river regime has become eloquent in the seasonal variability of climate from one place to another. The Barak basin and lower foothills of Manipur Western hills have

Introduction

Biosensor technology is a powerful alternative to conventional analytical techniques, harnessing the specificity and sensitivity of biological systems in small, low cost devices. Despite the promising biosensors developed in research laboratories, there are not many reports of applications in agricultural monitoring. The authors review biosensor technology and discuss the different bio-receptor systems and methods of transduction. The difference between a biosensor and a truly integrated biosensor system are defined and the main reasons for the slow technology transfer of biosensors to the market place are reported. Biosensor research and development has been directed mainly towards health care, environmental applications and the food industry. The most commercially important application is the hand-held glucose meter used by diabetics. The agricultural / veterinary testing market has seen a number of diagnostic tests but no true biosensor systems have made an impact.

Climate change presents horticulture with increasing challenges including heat stress, water scarcity, erratic rainfall, extreme weather, new pest pressures, and changing crop suitability. This chapter examines strategies for developing climate-resilient horticultural systems through improved cultivars, efficient irrigation, protected cultivation, mulching, canopy management, soil-health practices, and diversification. Climate-smart production also requires better forecasting, monitoring, risk management, and resource efficiency. Future horticulture is expected to integrate biotechnology, artificial intelligence, precision agriculture, automation, renewable energy, and resilient production systems. The chapter emphasizes adaptation rather than dependence on a single technology, promoting integrated approaches that maintain productivity, quality, profitability, and ecological sustainability under changing climatic conditions.

1.    UV irradiation is considered better than other irradiation methods in terms of

(a) Physical structure maintenance

(b) Chemical structure

(c) Sensory quality

(d) Microbial quality

2.    Irradiation with UV light is considered as

(a) Sterilization method

(b) Disinfection method

(c) Pasteurization method

(d) Cooking method

3.    UV treatment kills bacteria, viruses, fungi due to its effect on

(a) Metabolic pathway

(b) DNA

(c) Signaling pathway

(d) ATP generation

4.    Effectiveness of UV radiation on micro organisms depends on

(a) Species and strain

(b) Spore formation

(c) Culture and growth

(d) Both (a) and (c)

A successful and sustainable farmer producer organization (FPO) is an entity that is owned and managed by farmers, and is focused on improving their livelihoods through sustainable and profitable agricultural practices. Such an organization operates with a long-term vision, and is able to adapt to changing circumstances in the agricultural sector. Viability, stability and sustainability are the three degrees of permanency in business. Analysis of these three is very important for any business and entrepreneurs.

5.1. Viability

viability of a business indicates that it is (or has the chance to be) successful. A viable firm is profitable, which indicates that it generates more income than it spends on operating expenses. It is tough to resurrect a failing firm. The company would need to either boost income or lower expenditures. 

Sustainable horticulture seeks to produce nutritious and economically valuable crops while conserving soil, water, biodiversity, and other natural resources. This chapter examines organic, natural, and broader sustainable production systems and their underlying principles. Topics include organic inputs, compost, biofertilizers, biological pest management, crop diversification, mulching, recycling, soil-health improvement, and reduced dependence on synthetic inputs. Certification systems and market requirements are also considered, including Indian and international organic standards. The chapter distinguishes different production philosophies while emphasizing practical sustainability. Successful systems must maintain productivity, profitability, environmental quality, and consumer confidence. Sustainable horticulture therefore combines ecological principles with sound crop management, market awareness, and responsible resource use

3.1. CENSUS AND SAMPLE SURVEYS

Census or Complete Enumeration

A survey, which includes every element of the population, is known as Census or the Method of Complete Enumeration. If certain agencies are interested in studying the total population of a country, they have to obtain information from all the households in rural and urban area.

The essential feature of this method is that this covers every individual unit in the entire population. We cannot select some and leave out others. We may be familiar with the Census of a country, which is carried out after a particular period like every ten years. A housetohouse enquiry is carried out, covering all households. Human demographic data on birth and death rates, literacy, workforce, life expectancy, size and composition of population, etc. are collected and published by a government agency.

The sole science of meteorology is to deal with weather forecasting while livestock advisory based on weather forewarning is dealt with multidisciplinary approach in the field of livestock meteorology for the benefit of the livestock farmers. In this context, the current status of livestock advisory based on medium range weather forecasting is highlighted so that the tools for livestock advisory can be initiated and developed by the concerned for the benefit of livestock farmers in similar lines. Information on weather forecasting is used in various society linked sectors and animal husbandry component is one of them (Fig. 17.1).

5.1 Population Growth

In 2000, the world had 6.1 billion human inhabitants. This figure may rise to more than 9 billion in the next 50 years. For the last 50 years, world population multiplied more rapidly than ever before, and more rapidly than it will ever grow in the future. Anthropologists believe the human species dates back at least 3 million years. For most of our history, these distant ancestors lived a precarious existence as hunters and gatherers. This way of life kept their total numbers small, probably less than 10 million. However, as agriculture was introduced, communities evolved that could support more people.

World population expanded to about 300 million by A.D. 1 and continued to grow at a moderate rate. But after the start of the Industrial Revolution in the 18th century, living standards rose and widespread famines and epidemics diminished in some regions. Population growth accelerated. The population climbed to about 760 million in 1750 and reached 1 billion around 1800.

In 1800, the vast majority of the world’s population (86 percent) resided in Asia and Europe, with 65 percent in Asia alone. By 1900, Europe’s share of world population had risen to 25 percent, fueled by the population increase that accompanied the Industrial Revolution. Some of this growth spilled over to the Americas, increasing their share of the world total. The 2000 growth rate of 1.4 percent, when applied to the world’s 6.1 billion population, yields an annual increase of about 85 million people. Because of the large and increasing population size, the number of people added to the global population will remain high for several decades, even as growth rates continue to decline.

Between 2000 and 2030, nearly 100 percent of this annual growth will occur in the less developed countries in Africa, Asia, and Latin America, whose population growth rates are much higher than those in more developed countries.

1. INTRODUCTION

The Green Revolution and subsequent efforts through the application of science and technology for increasing food production in India, have brought self-reliance in food. The imputs given by the Government, State Agricultural Universities, State Departments of Agriculture and other organizations through the evolution and introduction of numerous hybrid varieties of fruits and vegetables and improved management practices have resulted in increased food production. However, the nation still faces the problem of the use of improper methods for the storage of food stuffs and their preservation leading to great wastage of the food produced. So, there is a urgent need for the application of food preservation and processing methods.

Food preservation involves all the processes used to maintain foods with the desired properties or nature for longer time. The process is has moved from an art to a highly interdisciplinary science. Food safety now the first priority of the food production and preservation industry, incorporating innovations and sustainability. The preservation and processing of food however, is not as simple or straight forward as it was in the past. A number of new preservation techniques have been developed to satisfy the current demands of economic preservation and consumer satisfaction in nutritional and sensory aspects, convenience, and safety, absence of chemical preservatives, and environmental safety. Understanding the effects of each preservation method on food has therefore, become critical in all the aspects.

Organic food sales increased steadily from the late 20th century. Greater environmental awareness, coupled with concerns over the health impacts of pesticide residues and consumption of genetically modified (GMO) crops, fostered the growth of the organic sector. Realizing the benefits of organic food, especially after COVID-19, consumers are also demanding organically grown food and fiber and are willing to pay premium price. But to tap the market, there is an inevitable need for certification. Recently launched Food Safety and Standards (Organic Food) Regulation, 2017 mandates that all food products sold as organic must be certified and comply the basic requirements of the Act. The organic food offered or promoted for sale shall also comply with all the applicable provisions of either National Programme for Organic Production (NPOP) or Participatory Guarantee System for India (PGS India). Organic certification is a process certification. The requirement to confirm that the product is organic include labelling on the package and traceability for both domestic and export needs to be understood. For import and export of organic produce, transaction certificate issued by an Accredited Certification Body is required. These requirements are essential for fresh and processed food items. In this chapter, we tried to eloborate the process and procedures for organic certification.

Fourier transform infrared (FTIR) spectroscopy is one of the most effective methods for determining the functional groups and potential molecular interactions between membrane chemical molecules. Understanding of (infrared) IR absorption band placements in the spectrum as wave numbers can be used to identify the various chemical constituents (such as aromatic amides) that may not be visible by X-ray photoelectron spectroscopy.

1.    Introduction
    
2.    Resources
    2.1    Crustacea
    2.2    Zooplankton
    2.3     Mollusca
    2.4     Insecta
    2.5     Thallophyta
    
3.    Biosynthesis
    
4.    Structure
    
5.    Detection and Estimation of Chitosan
    
6.    Specification of Chitin and Chitosan
    
7.    Economics of Chitin Recovery and Production
    
8.    Social and Economic Value of Chitosan
    
9.    Production of  Chitosan from Chitin
    
10.    Production of Glucosamine Hydrochloride
    
11.    Recent Advances in Applications of Chitin and Chitosan
    11.1    Applications of chitin, chitosan and glucosamine hydrochloride
    
12.    Advantages of Chitosan
    12.1    Cholesterol and overweight lowering
    12.2    Cholesterol lowering in Human
    12.3    Osteoarthritis prevention and Treatment
    12.4    Carrier for nasal application of drugs
    
13.    Conclusion
    
References and Further Reading

Climate and Ornamental Crops

There are many factors which affect the production of the ornamental crops. It may be internal or external factors. Climate and soils are the chief natural factors on which the success or failure of ornamental crops production is dependent. A knowledge of the effect of various soil and climatic conditions on ornamental crops production is very essential for every prospective to grower, climate includes several factors like temperature, relative humidity, rainfall, wind, hail, light whereas, soil covers such factors as moisture supply texture, pH etc.

Temperature: The rate of development of a plant (the leaf unfolding rate) is a function of temperature. As temperatures increase, the leaf unfolding rate increases. If the temperature exceeds the maximum temperature, plants experience stress and leaf unfolding rate declines. Given the high costs of fuel, many growers are tempted to reduce the greenhouse temperature to save money on fuel. Because the rate of crop development is dependent on temperature, reducing temperatures increases production time of all crops. However, some crops will be more severely delayed than others. Reducing temperatures from 20°C to 16°C increased time to flower of Salvia farinacea by 13 days. This same temperature drop only increased days to flower of pansy by four days. For crops that are severely delayed by lower temperatures, reducing the growing temperature may actually increase total fuel costs for producing that crop. Every plant has fairly well defined range of temperature to which it is tolerant and below which the plants of that variety are liable to be injured to a more or less extent.