eChapters

Introduction

The prosperity of Tamil Nadu depends on the development of rural areas. As per the 2001 Census, Tamil Nadu’s rural population was 36.2 million, amounting to 58% of the total population. Of these 90 percent are earning their livelihood through agriculture and allied activities. The agricultural situation in Tamil Nadu largely depends on the quantum of rainfall received during seasonal rainfall of South West and North East monsoon. North East monsoon which occurs around September to November is more crucial as South West monsoon which will give enormous rainfall to other Indian states is blocked by Western Ghats. So Tamil Nadu is receiving low rainfall and it also comes in three to five heavy showers during October and November. This limits the wet period (good condition for cultivation) to two to five weeks for the whole season. The wet period is further shortened by fast wind and soil type in some area. Thus, the success of the crop is largely determined by one’s capacity to exploit the short wet period. Even though the Tamil Nadu is relatively better position in tapping available ground water resources (92 percent of potential has been tapped), 82 percent of the well is owned by medium and large farmers who is only 10 per cent of total cultivators.

Introduction

In the existing socio-economic scenario, economic independence is considered as one of the main status indicator in the society. Women especially in rural areas are the deprived section of the society on account of their dependence on others for economic reasons. This necessitates generation opportunities so as to make them economically independent. Moreover, women’s contribution to national development is crucial. The process of development would be incomplete and lopsided, unless women are fully involved in it. Many innovations have failed due to non-satisfaction of women on the perceived attributes of innovations. So, it is necessary that they should be informed, trained, convinced of a technology primarily.

Farm women can’t emerge as a good entrepreneur, if they are not equipped with any skill, knowledge, education and information. So, research studies are essential to assess the training needs of them to become a successful entrepreneur. In order to know the training needs of farm women for entrepreneurial development, and the constraints faced by them to become a good entrepreneur.

Introduction

Women are vital part of the Indian economy, constituting one-third of the national labour force and are considered to be the major contributor to the survival of the family. Despite progress in several indicators, gender analysis of most social and economic data demonstrate that women in India continue to be relatively disadvantaged in matters of survival, health, nutrition, literacy and social status. More than 90 percent of rural women in India are unskilled thus restricting them to low-paid occupations. Women generally have no control over land and other productive assets, which largely excludes them from access to institutional credit and renders them dependent on high-cost informal sources of credit to secure capital for consumption and for productive purpose.

Among 621.1 lakh population in Tamilnadu (according to 2001 census) 308.4 lakh are females. The people below poverty line in Tamilnadu are about 21.12 percent, out of this, women share equal percentage of poverty. In a patriarchal society, women have inadequate knowledge on various aspects and depend largely on the male siblings or husbands. They also do not have much access to credit or income as most of the expenditure is controlled by men. Even where they have some measure of control they spend most of their earnings on family needs. Estimates shows that more women and girls experience the vigour of poverty than men in poor holds because of inequalities in access to food, healthcare and education. (www.undp.org.in).

Biological materials

Seeds from self fertilized plants will be obtained from the concerned breeder. Hand picked, uniform sized seeds will be chosen for mutagenic treatments.

Gamma irradiation

Gamma irradiation will be performed in gamma chamber, exposing the seeds to gamma rays from ⁶⁰Co source: well filled and hand picked uniform sized seeds with a moisture content of 8.5 per cent will be chosen for irradiation. A sample of say 120 seeds per treatment will be packed in butter paper cover and placed in 100 curie ⁶⁰Co gamma cell. The treatments will be given for various duration depending on the doses required with the dose rate of say 54.05 rads/sec.

Chemical mutagenesis

The seeds will be soaked in water for say 6 hours before the chemical treatment. The duration of pre-treatment with water will be determined on preliminary blank experiment. In cowpea genotype Co. Vu. 623, there was about 5-10 per cent radical emergence about 12 hours after soaking in water. There was no radicle emergence before 12 hours water soaking. An initial pre-soaking period of 6 hours was therefore adopted for later treatment with mutagens. The total treatment period will be about 12 hours (6 hours with water and 6 hours with chemical mutagen). The duration of treatment with chemical mutagens will also be based on the half-life period of the mutagen solution.

Experimental mutagenesis is an important unconventional source to produce mutations in high frequencies in cultivated plants. It makes possible the achievement of desired breeding objectives or atleast decisive progress in this direction through selection of mutants. By establishing extensive collection of mutants based on productive varieties excellent sources of valuable material for theoretical studies and for breeding work can be provided. The induced mutagenesis helps in diversifying varieties and in internal rectification. The simultaneous realization of different breeding objectives may be possible through induced mutagenesis especially in leguminous crops.

Stubbe (1959) stated that mutation breeding as a modern method of plant breeding has proved its justification. It mutation breeding, basic information is a prerequisite on the type of spectrum of induced mutations and relative effectiveness and efficiency of different mutagens.

Naiad: The immature stage in insects with incomplete metamorphosis that feed and develop in water; an aquatic, gill-breathing, immature instar of hemimetabolous insect.

Narcotic: A chemical that causes reversible depression of the nervous system.

Narrow spectrum (as applied to insecticides): Having an effect on only a narrow range of insects.

Nasus: A nose, the snout of certain termite soldiers (nasutes).

Nasute (pl. nasuti): A type of soldier caste in certain termites; this form bears a median frontal rostrum or snout through which it ejects a defensive fluid; the jaws are small or vestigial.

Nasutus (pl., nasuti): An individual of a termite caste in which the head narrows anteriorly into a snoutlike projection.

Natality: Population ‘increase’ factor; birth rate; often measured as total number of eggs or eggs per female per unit of time.

I beam: A steel beam shaped like the letter I, used in structural work.

I. H.P. (Indicated Horse Power): ‘Pure’ horse power as measured in the combustion chamber before friction and other loses are subtracted.

IC Engine (ICE): Internal Combustion Engine.

Ideal compression-compression refrigeration cycle: completely vaporizes the refrigerant before it is compressed and expands the refrigerant with a throttling device, such as an expansion valve or capillary tube. The compression-compression refrigeration cycle is the most widely used cycle for refrigerators, air-conditioning systems, and heat pumps. It consists of four processes:l- 2 Isentropic compression in a compressor; 2-3 Constant- pressure heat rejection in a condenser; 3-4 Throttling in an expansion device; 4-1 Constant-pressure heat absorption in an evaporator

Ideal cycle: is an actual cycle stripped of all the internal irreversibilities and complexities. The ideal cycle resembles the actual cycle closely but is made up totally of internally reversible processes.

Ideal gas: Is a gas that obeys the ideal-gas equation of state.

The genus Bougainvillea, although having broad range of adaptability along with diverging habitate is not rich in scientific literature. The available literature on description of elemental species and mode of origin and description of different sports (cultivated species) are very poor and all the literarture are not available at one place. On the basis of available literature (Philbert 1789, Humboldt and Bonpland 1808, Fitch 1854, Bailey 1914, Merril 1923, Standley  1931, Heimerl 1934, Hottes 1947, Bor and Raizada 1948, Preston 1950, MacSelf 1951, Sargeant 1951, Van 1951, Crane and Lawrence 1952, Holttum 1955a-d, 1957a,b, Pancho and Bardenas 1959, Marigowada 1961, Sharma 1962, Menninger 1970, Ramcharan et al., 1974, Zadoo et al., 1976, Linnaeus 1789, Swarup and Singh 1995, Willdenow 1798, McDaniells 1981, Rodale et al., 1997, Gordon 2002, Lopez and Galetto, 2002, Fatima et al., 2007, Kent et al., 2007, Kobayashi et al., 2007a,b, Hammad 2009, Lack, 2004, 2012) an attempts has been made to give a short description of elemental species and important role played by Bougainvillea cv. 

The bougainvillea varieties reported from India have been mentioned above. The exact origin of all the varieties are not available. Breeders, sometimes, do not disclose the origin of varieties. An attempt has been made to trace out the mode of origin of different varieties as per available information (Anonymous 1981, Sindhu 2015, Sindhu and Swaroop 2015, Singh 1999, Singh et al., 1999, Nirody 1932, Sharma 1961, 1962, 1963, 1964, 1968, Sharma 1969, Pancho 1963, 1967, Marigowda 1957, Pancho and Elisco 1959, Pancho and Capinpin 1961, Pancho et al., 1961). Information available is not complete in most cases. Following abbreviations have been used – Hybrid Seedling (HS), Bud Sport (BS), Induced Mutant (IM) :

Cashew has a long history as a useful tree but only in the current century, it became an important tropical horticultural crop. Small-scale local exploitation of cashew for its nuts and cashew apples is the pattern for more than 300 years in Asia and Africa. It was not until early years of 20^th century that international trade in cashew kernels began with first exports from India. Although with slow beginning, cashew became an important commercial crop in the last couple of years. In India, use of cashew apples and nuts was started by local people, and accounts from Africa are similar; making cashew wine/liquor possessing a common practice in both Asia and Africa (Johnson, 1973).

Cashew, an evergreen tree, produces both nuts and apples, has become a crop of importance owing to the highly valued kernel and wide adaptability to varying agro-climatic conditions. India is one of the largest producer, exporter and consumer of cashew in the world. Today, cashew has become a crop of high economy and has moved from a crop of waste lands to commercial crop, even in organized sector (Singh, 1998).

Soil
Cashew is grown on a wide variety of soils in India. It comes up well in all types of soils at an altitude up to 700 m. It cannot stand in water logged or saline soils. It can come up in very sandy soils also. Adoption of cashew has been found in wide variety of soils from coastal sands to degraded laterites. The worst soils, not suited to other crops, are normally allotted for cashew. In Sri Lanka and Philippines, it is grown in alluvial soils. Cashew comes up well even in volcanic soils of Indonesia, Fiji and some part of Philippines. Cashew is not suitable in heavy clays, water logged conditions and ill drained soils. It is grown abundantly in loose sandy soils particularly in South India, East Africa and Brazil. In Karnataka and Kerala, it grows well in poor laterite soils. Cashew prefers well-drained aerated sandy loam soils with adequate moisture. Coastal plains and plateau are very good for cashew cultivation.

In India, cashew is mostly grown on laterite and red soils and coastal sands. The tree has an extensive root system, which helps it to tolerate a wide range of moisture levels and soil types, but commercial production is only advisable in well-drained, sandy loam or red soils with slight acidic pH (4.5-6). The cashew tree can flourish in the sand of open beaches, but it grows poorly in heavy clay or limestone.

Though cashew can be grown on a variety of soils, a well-drained 1-1.5 m deep soil having a water table between 2 and 10 m depth and pH of 5.6 to 7.0 is preferred. Laterites, red and coastal soils rich with organic matter are best for cashew growing. Even the marginal soils can be used for cashew cultivation but the waterlogged condition should be avoided as the cashew is very susceptible to it (Farooki and Sreeramu, 1999).

Cashew being a highly cross pollinated crop, planting of seedling is not recommended. In the past seed propagation was in vogue, which has resulted into large variation in plants due to highly heterozygous nature. However, it is seldom practiced now-a-days except to raise the rootstock materials. Selection of seed is very important for raising rootstock material. Seed nuts which are heavy and sink in water should be selected for raising seedling. Seed nuts should be collected from high yielding trees. Seed nuts collected from the current season’s crop during March, April and May are the best for seed production as they have been found to give high percentage of seed germination. Studies conducted to investigate the time taken and germination percentage revealed that heavy nuts (sunken in water) gave 92 per cent germination on 14-17 days, whereas floating nuts took 14-22 days and gave 64 per cent germination (Krishnamurthy et al., 1985).

Years ago before becoming the food producers, humans, for years remained food gatherers and the food collected from wild was sufficient to satisfy the food needs of human on the earth. The ever increasing population demanded more food to quench their hunger which is mainly served by plants but plants have limited intrinsic potential or threshold limit upto which it can put on biomass which ultimately could be consumed as food. Though by making certain modifications in the genetic make-up of the plant, the output can be altered. Before attempting any modification in the genetic make-up, it is necessary to understand the genetics and genetic behavior of the targeted plant. So the aim of studying the genetics and genetic behavior of the plants is to improve the quality and quantity of the produce. The inferences of genetics cannot be directly applied to the improvement but the principles of genetics and the genetic behaviors are set into particular situations. This part of genetics which deals with the improvement of the quality and quantity of the produce with the aim of benefitting mankind is called plant breeding.

Abstract

The main objectives of this paper are to know the variability in sustainable growth of banks through the various advantages of the banks participation in commodity market along with identification of the possible strategies to more participation in Indian commodity markets by the banks. The data collected through the structured questionnaire from the 150 respondents. The SPSS 16.0 version was applied to derive the results. The techniques of frequency and the regression analysis applied to infer the results. The study found that 46.5 percent variation in sustainable growth was explained through the investment portfolio and hedging for commodity price volatility and also there was a significant difference between each other and higher returns through the diversified portfolio was more responsible towards the sustainable growth as a reason of banks participation in commodity market. The study also found that 98.7 percent of variation in sustainable growth was explained through the various advantages of the banks participation in commodity market and also found that increase in banks customer incomes was more favourable response towards the sustainable growth and it was followed the lower interest rates for borrowers and the lower volatility and also there was a significance difference from these variables to the dependent variables. It is suggested that there should be a appropriate training programmes of the bank officials to more participation in commodity market through the diversification of portfolio to increase the more returns.

Abstract

Green is the ‘innovative’ word that has now evolved to become the soul of every market. This revolution has given a rise for the different kind of green activities in the normal course of life, be it personal or professional. Companies are trying to adopt green in their business activities, be it production; product; services; or packaging, consumers are also not behind for the perseverance of environment and natural resources. Consumers are day by day becoming more aware towards environmental issues, purchasing eco-friendly products, and adopting a green lifestyle. This paper examines the growing awareness of consumer towards green initiatives, products, campaigns run by the companies, and their attitude, and purchase intentions for the same. Therefore, the purpose of this research paper revolves around describing the present state of green activities in business era, and to know the awareness and attitude of consumer in Jodhpur city. 

Introduction

Biomass is a major source of energy in developing countries, particularly in India. Biomass as a fuel used in residential sector of India is a major component of total energy use in India. Type of fuels used in residential sector in India varies with locations and availability of the local fuels and also by way of cooking food in the open fires or in the rural cook stoves (Earthen Chulhas). The majority of the household in the rural sector of the developing countries burns the biomass fuel under traditional open stoves or in advanced closed cook stove (Fullerton et al., 2008). Biomass fuel includes any material of plant or animal origin, which is deliberately burnt by the human being. Approximately, 2 billion people in the developing world use the biomass fuel as the major source of domestic energy (Balakrishnan et al., 2002). Out of residential fuels, 80-90% of the energy requirement in rural India are met with the use of biomass in the form of fuel wood, dung cakes, charcoal and agricultural residue (TEDDY, 2007). Burning of biomass from all these sources is well known to be associated with the emission of smoke/plumes consisting of particulate and gaseous species as these are not energy efficient processes and thus the fuels are not burnt completely. The species emitted and their concentrations depend on the nature of the source of biomass and other factors including the physical parameters associated with the consumption of the biomass. The fate of the initial fire emissions depends strongly on both their composition and the regional state of the atmosphere. Once airborne, the particles begin to grow slightly in size as they age through condensation and coagulation. Despite their high concentrations and widespread distribution in the atmosphere, the sources remain poorly characterized. Biomass burning has drawn global concerns in the past decades for its effects on visibility, human health and global climate by emitting particulate matter (PM) and other gaseous pollutants (Andreae et al., 2005). Biomass burning emits significant global source of PM emissions to the troposphere which leads to deleterious impact on the earth’s atmosphere. It has an impact on the chemical composition of the atmosphere, the formation of photo oxidants and thus on air quality on a regional scale and climate change (Andreae et al., 2005). They also have harmful impact on human health, natural environment and ecological system (Cheng et al., 2000). The various impacts of these emissions have been well studied by Cheng et al. (2000) and Bardouki et al. (2003). Interest in this topic grew when several studies suggested that biomass burning emissions could rival fossil fuel emissions (Crutzen and Andreae, 1990). Biomass burning has received considerable interest (Bowman et al., 2009).

Marketing Information System (MIS)

Market information is crucial to effective marketing management. Business success now requires a sustainable and cutting-edge knowledge base. Information becomes knowledge when it is discriminated, classified, processed and assembled in an appropriate manner. Knowledge is the final entity in the sequence.
Marketing decisions are based on marketing information and research. The scientific decisions are based always on the facts and figures. The information based decisions are useful for solving day to day problems. Marketing information are the facts and figures required for taking the marketing decisions. Marketing information assists marketing decisions in right perspectives. The marketing managers are expected to get all the relevant information. They have to evaluate the information for their purposes. The utilities of each source of information are assessed to have optimum use of the resources. Good information improves decision making process. The marketing managers have to make decisions based on available information and try to collect adequate and correct information from all sources. Establishment of an effective marketing information system (MIS) is essential for adequate and correct marketing decisions.

In India farming was traditionally subsistence in nature but with the passage of time, the nature of farming has changed to commercialized system faming. With the commercialization of farming, price of the product along with its quality has become an important factor in marketing. Quality and safety issues have also gradually gained importance as people in general have become conscious and aware of the hygiene, health and safety issues related food and food products. Perishability of food items requires more emphasis on its quality and safety. The formal system of regulations in quality and safety standard has been mainly the contribution of the developed world. The International market has set a high standard of quality and safety of agriculture products. In the country the standardization of quality and safety of agricultural products has gained momentum in the last 10-15 years.

Introduction

Agriculture is an important sector for countries like India, who have majority of its population, directly or indirectly depend upon agriculture. The sector which feeds the majority of population of any country needs special attention for its all round development. Marketing is such a crucial aspect related to agriculture that is probably not developed in any of such countries which largely depends upon agriculture. Underdeveloped and lack of resources are the main reasons behind the underdeveloped nature of agricultural marketing. In simple terms, agricultural marketing means the buying and selling of agricultural produce. The Indian council of Agricultural Research defined involvement of three important functions, namely assembling, preparation for consumption and distribution.

Potato is a major food crop, grown in more than 100 countries in the world and it is one of the major commercial crops grown in India. India ranks third by contributing around 7.5% to the world’s production. During 2006-07, 27 million tonnes was produced in an area of about 1.5 million ha. However, potato consumption per capita in India (14.8 kg/head/year) is one of the lowest in the world and hardly one per cent of the potato is processed.

All over the world, when people get richer their life style change and they consume more animal protein, especially meat. We may add value by good genetics and know how in farm and feed management. There would be huge demand for poultry products and meat in coming years in India as per capita income of middle class people is gradually increasing and for that production of meat and meat products is required to be increased to meet the demand. Meat of goat, buffalo chicken are generally sold in India. Marketing of meat and meat products, chicken and poultry products such as eggs are the main challenges for the new farmers as there is no ready market in India. Recently there is huge demand of Chicken in Northern India. The initial problem faced by farmers is getting the special chicken feed for the different age groups. There is no well equipped dedicated slaughter house available in every city. New technology for animal slaughter is required so that all parts of animal are used properly without losing valuable protein. The idea should be to use innovated technology to optimize the profits in the chain.

The words “Economy” and “Ecology” have the same root. Both these words are derived from Greek ‘Oikos’ means house or house holds and both imply thrifty economical way of dealing with valuable resources. However, for some reason we seem to find these two words coming opposite each-other in many situations.

The destruction and degradation of the environment has become the greatest problem of our century. Our survival will depend on how well we are able to redefine our technologies and our relationship with nature. We therefore need a new sustainable eco-agri revolution and a country like India is in an ideal situation to give a model for that. In the new economy, good ecology will be fundamental to good business.

To many Bio Fertilizer is still an unclear term. Often they are identified as urban and rural organic wastes, plant extracts, organic components etc. However, Bio Fertilizer is mostly commonly referred to the use of soil micro organisms to increase the uptake and availability of plant nutrients.

Bio Fertilizer have gained a good deal of momentum and the industry after a slow start is now gaining more and more importance globally. The major reasons for this are that they:

Saline Water Agriculture has been drawing interest as one of the solutions for limitation of world fresh water supply, farmland availability, salinity ingression and the pressing future need of food supply. The cultivation of salt-tolerant crops on saline soil and with saline waters has significant social and economic potential.

It is often argued that fresh water agriculture near rivers and ponds was invented because of the need to sustain people and communities. Saline water agriculture is going to be needed for sustaining our future generations and civilization.

1 History

Animals are culturally worshipped and revered as gods in India by different communities such as cow as Kamadhenu by Hindu religion. The scientific study of animal welfare has rapidly grown during last few years. Many religions follow principles of ahimsa such as Jains and Hindus do not harm cattle; Muslims do not harm pigs etc. Thus caring for welfare of animals is an inborn attitude of majority of Indians. As per the Indian tradition and culture, animals always had a respect and a special place in society. Hinduism, Buddhism and Jainism have always preached kindness and compassion to animals. Each Hindu God or Goddess is seen with an associated animal as vehicle or incarnation. For example, Lord Krishna was a shepherd and is seen with a cow, Lord Rama with the monkeys, Lord Vishnu with the eagle and Lord Shiva with a snake around his neck and the bull ‘Nandi’ at his feet, Goddess Saraswati is the goddess of wisdom and literacy is seen with swan.

Performing animal means any animal which is used at, or for the purpose of any entertainment to which the public are admitted through sale of tickets. Thousands of wild animals are used worldwide to perform demeaning and unnatural tricks to entertain the public (circuses, side-shows, within zoos, and in advertising, film and television). 
There are number of welfare issues related to performing animals which involves animal fighting, shows, (among domestic animals) or entertaining wild animals.

Long used as beasts of burden, animals in India are still regarded today as little more than commodities rather than sentient beings who feel pain, stress, exhaustion and depression. Low literacy rates and the tendency to follow traditional practices and cultural traditions have left India surely lacking in the area of animal welfare. India holds the majority of the world’s working animal population. Animals that are forced to work in India include bullocks, horses, ponies, mules, donkeys, camels, elephants and dogs. Despite a proud heritage and a culture rooted in tolerance and compassion, animal welfare is largely ignored by Indian society, leading to extreme animal suffering. Our villages and to a great extent, the urban population still allow working animals to be mercilessly exploited in fields, on the streets, in brick kilns, on battlefields, on playgrounds and in timber areas – all in the name of agriculture, entertainment, security and any number of other “justified” pursuits.

Companion animals are all those species of animals which are kept by man for companionship and which are often referred to as pets. It is quite common to see community dogs or cats living in residential colonies. This is because due to very fast urbanization all the open spaces are getting used up for construction of residential complexes, and the animals like dogs and cats living on these open areas are getting displaced. The residents that occupy these residential buildings find these animals to be a nuisance and want them to evicted.

Pet and companion animal can be discussed under street dog/stray dogs and owner dogs.

Good livestock welfare practices demands thorough understanding of the basic nature of the animal. The science of understanding the details of animal behaviour is known as Ethology.  Knowledge about the behaviour of the species being reared proved as an important tool for implementing animal welfare in practical husbandry practices. Now a day’s global community is also advocating for the better livestock welfare standards. Exploiting animal’s natural behaviour could certainly prevent unnecessary sufferings related to handling and restraining during routine farm activities. On the one hand this ensures physical and mental welfare of livestock, while on the other hand improvement in the production is guaranteed. Without involving heavy investment behavioural knowledge based management interventions can bring paradigm shift in welfare status of farm. Therefore, behavioural studies are of great importance in increasing our understanding and appreciation of animals.

India is known for its rich wildlife heritage. In fact, the country is considered one of the best among available mega-biodiversity areas in the world. The landscape and agro-climatic conditions of India make it a unique habitat for wild animals. The government of India has made attempts to conserve wildlife through different projects like Corbett tiger, Elephant projects etc. The wild life management in India is at present ‘preservation-oriented’. This is bound to remain so for a long time because of the significantly depleted status of our wild life population. Indian government in pursuit of conserving the heritage of wilderness has made committed efforts with several wildlife and Forest Acts to ensure protection by declaring the areas as protected under the spectrum of national park and wildlife sanctuaries. The eco-tourism and conservation awareness has created environmental consciousness among the people.

Animal’s response  to external stimuli is a behavior. Domestic animal behaviour and performance are correlated. Man’s intervention has led to huge modifications and modulations in animal behaviour patterns over ages but certain characters and normal behaviours of animals are needed to be expressed, otherwise may lead to abnormalities or performance loss. Animal freedoms also ensure certain basic freedoms to domesticated animals including freedom to express normal behaviour. With the developing concern over animal welfare among consumers, growers and animal activists, the need to ensure animal freedoms is call of the hour. Measuring animal welfare is a complex process which requires multidisciplinary approaches. There are four approaches to determine animal welfare viz, productivity, animal health and disease, physiology and behavior which are used individually or in combination.

8.1 Introduction

Nanotechnology is the manoeuvring or self-assembly of individual atoms, molecules, or molecular clusters into structures to craft materials with new properties. The definition of nanotechnology is based on the prefix “nano” which is from the Greek word meaning “dwarf”. In more technical terms, the word “nano” means 10^-9, or one billionth of something. The word nanotechnology is generally used when referring to materials with the size of 1 to 100 nanometres, which is true for metallic nano-material. In case of polymeric nano-material, size may reach 600 nm, as polymeric materials are larger in size compression to metallic material. Nano-materials have different properties from bulk materials as a result of their size. These differences include physical strength, chemical reactivity, electrical conductance, magnetism, and optical effects (Schmid, 2006).

17.1 Introduction

In industrialized nations the air is filled with numerous pollutants caused by human activity or industrial processes, such as carbon monoxide (CO), chlorofluorocarbons (CFC), heavy metals (arsenic, chromium, lead, cadmium, mercury, zinc), hydrocarbons, nitrogen oxides, organic chemicals (volatile organic compounds, known as VOCs, and dioxins), sulphur and other particulates. The presence of nitrogen and sulphur oxide in the air generates acid rain that infiltrates and contaminates the soil. The high levels of nitrogen and sulphur oxide in the atmosphere are mainly due to human activities, particularly burning of oil, coal and gas. Only a small portion comes from natural processes such as volcanic action and decay of soil bacteria. Water pollution is caused by numerous factors, including sewage, oil spills, leaking of fertilisers, herbicides and pesticides from land, by-products from manufacturing and extracted or burned fossil fuels.

Microsatellites are highly polymorphic repetitive DNA sequences that are randomly distributed throughout eukaryotic genomes displaying high levels of variation and consequently, are ideal for deciphering genetic variability. They are having high mutation rates (1-4 per generation). Among the microsatellite, (CA) n repeats occurring about one in every 30 kb of mammalian genome constitute useful genetic markers, as their polymorphism is sufficiently stable and their mutation rate are low enough. Out of innumerable microsatellite, ZuBeCa3 microsatellite shows huge variability in the canine genome (Switonski and others 1998). This microsatellite is located in chromosome 9q21-q22 and vastly studied in different dog breeds depicting its heterogeneous distribution over the chromosome (Switonski and others 1998).

Mammary tumours are the most frequent neoplasia in female dogs; therefore, these tumours represent a serious problem in veterinary medicine. Many tumours presented activated genes which are not normally expressed in the tissue from which they originate. The proteins derived from the expression of these genes are called tumour markers. Detection and measurement of these proteins are used in medicine for diagnosis and assessing the evolution of the tumours.

Surgery stands as first choice for the treatment of canine mammary tumours. The simplest surgical procedure in the mammary gland should be performed (MacEwen, 1989) in the absence of metastatic disease and inflammatory carcinoma. Nevertheless the controversy for performing simple or radical technique still goes unabated, as the published data are to clear to prove the practical value of radical surgery compared to simple mastectomy. Brodey et al. (1983) is reported that six categories of surgical excision of mammary tumours can be performed.

1.1. Introduction

Dairy animal production in the last few decades witnessed tremendous growth throughout the world. The remarkable success of the dairy animal production can be attributed to the constant efforts of researcher, planner as well as producer. At present dairy farming is becoming a commercial activity. Hi-tech dairy farms produce high quality milk for making value added milk products for competitive markets around the world. The management of the dairy farming enterprises is crucial for the sustainability and profitability of it. The effective management of dairy animals essentially emphasizes the following areas:

4.1. Introduction

Heifers are young female cattle from 12 months of age to first calving. Heifer management is important as they are future cow of the herd. Proper growth and body condition of the heifers are associated with their early sexual maturity and age at first breeding, and their later productive and reproductive performances, when they become cow. Thus, proper care and management of the heifers is necessary to establish a good dairy herd.

5.1. Introduction

A dry cow is a cow that is not producing milk. Usually cow remains in-milk for about 305 days (average lactation length), after that it remains for a period of about 60 days in dry condition (not giving milk) called dry period. Dry period is critical for a cow for regeneration of her udder and reserve nutrients for the next lactation, otherwise, milk production will not be upto the mark and the cow may suffer from several metabolic diseases after parturition. A dry cow is just as valuable as a lactating cow, therefore should be not neglected. A dry cow management programme includes nutrition, general management and health control programme.

26.1 Introduction

The green revolution brought dramatic changes in productivity of rice and wheat and the production increased tremendously using high yielding wheat and rice varieties coupled with fertilizers and pesticide use to meet urgent demands of food. The world population is growing rapidly at an alarming rate. It has crossed 7 billion mark and is expected to become between 8.3 and 10.9 billion by 2050 (United States Census Bureau (USCB). India is second largest populous country of the world with 17.4 % of world population. Such an enormous overpopulation will result in extreme pressure on environment, global food supplies and energy resources. The less arable land and fewer renewable and non-renewable resources, the food production has to come from increases in production rather than expansion of cultivable areas.

Vacreation : The pasteurization of the milk or cream under reduced pressure by direct steam is called vacreation.

Vacuum : The state of negative pressure. It is equal to atmospheric pressure minus absolute pressure.

Vacuum cooling : A technique of cooling vegetable (leafy vegetables, asparagus Brussels sprouts) having a high surface to volume ratio rapidly and uniformly by boiling off some of their water at 10C and at low pressure (5 mm of Hg) into a sealed container. The produce is cooled by evaporation of water from the tissue surface and is more rapid than hydro cooling.

Introduction

Beauty, purity, love and passion are some of the emotions symbolized by the flowers. The feelings of love, affection and joy are conveyed effectively with these non-speaking beauties of nature, for example a lotus conveys purity, rose love, pansy thoughts and narcissus egotism. Flowers have a definite role to play at almost all occasions of human affairs like birth, marriage, worship, adornments and death. Besides flowers, other ornamental plants also play an important role in environmental planning of urban and rural areas and from wasteland development to overcoming pollution. An important aspect of floriculture is that it is a good avenue to generate gainful employment for youth and women of peri-urban and rural areas.

Introduction

Production system under arid and semi-arid region faces several biophysical constraints (high solar radiation, low and erratic rainfall, high wind velocity, poor soil conditions, etc.). Availability of irrigation water and irrigation potential in these regions are meager. Nutrition, food security and sufficient livelihood options based on agriculture are the major challenges of the people living in these regions. Sustainable productivity in these regions cannot be achieved by monoculture of either seasonal or forage crops, and thus hinges the need for diversifying the cropping pattern through fruit based cropping system which has good potential particularly in the arid and semi-arid regions. Because hunger and malnutrition are often linked to poverty, providing economic opportunities through horticultural production not only helps family incomes, but also addresses food security and nutrition. Thus, cropping system approach for agricultural production has greater significance in these regions.

Weeds are unwanted and undesirable plants which interfere with the utilization of land and water resources and thus adversely affect human welfare. They can also be referred as plants out of place. Weeds rank first among different agricultural pests causing crop loss. About 30,000 species of weeds have been listed in the world, out of which 18,000 cause serious damage in different ways resulting in considerable loss to agricultural production.

With the advent of modernization and urbanization, people are shifting from rural to urban areas, thereby, urban population is increasing day by day resulting in congested cities and towns. All around the world, a huge number of buildings are being constructed adding many more in future. Throughout the years, replacement of vegetated surfaces with paved and impervious surfaces in the urban areas have increased the temperature as compared to rural areas, because the paved surfaces absorbs, retain and reradiate more solar energy than vegetation. The ambient temperature in urban area can be as much as 6oC higher than the air in rural areas.

R - Enamel can: The acid resistant, gold coloured enamel treated can are called R enamel cans. It is used for canning of acidic food which have soluble colouring pigments.

R value: R value is a measure of resistance to the flow of heat through a given thickness of a material (insulation) with higher numbers indicating better insulating properties.

Rabbitto and putridity: The surface taint of the milk caused by Pseudomonas putrefaciens is called rabbitto and putridity.

Racking: An important operation for the wine production in which wine is siphoned off and is transferred to a fresh vat with the help of a false bottom. Racking is repeated decanting to remove the slowly setting cloud of the freshly fermented young wine. It is also called clarification. It is synonym to siphoning.

Rad: It is the unit of radiation dose being equivalent to the absorption of 100 erg/g of irradiated material.

Radappertization: It means complete sterilization of foods by using irradiation. It is equivalent to commercial sterility. High dose of the radiation (25-45 kGy) is required for killing all microbes.

Taxonomy is the science of identifying (discovering), describing, naming and classifying organisms. It is a complex summing up of knowledge starting with thorough analysis to base the synthesis that will end up in the name of a taxon. Correct identification of biological taxa is a necessary prerequisite to all other enquiries about the biological world. Taxonomists attempt to divide the world of living things (biodiversity) into distinguishable entities (taxa-such as species, genera, and families), develop tools (e.g., identification keys) to allow others to recognize and identify these taxa, and organize the described taxa within a hierarchical classification system that reflects evolutionary relationships. The outcomes of taxonomy are, therefore, very practical in terms of providing tools to facilitate identification, an infrastructure for organizing biological information, and a universal language for communicating information about the identity and classification of biological entities. Thus, naming and ordering of objects into groups is probably the most fundamental step in the development of scientific principles. Taxonomy identifies and enumerates the components of biological diversity providing basic knowledge underpinning pest management (Ramaraju and Pratheep, 2008). 

Botanical Name : Anacardium occidentale L.
Family : Anacardiaceae 
Origin : North East Brazil in Latin America. 
Chromosome No. : 2n=2x=42
Type of fruit : Droup. 
Type of Inflorescence : Panicles (Both male and  hermaphrodite flowers occur on the same inflorescence)

Botanical Name: Hevea brasiliensis
Family: Euphorbiacace
Origin: Brazil
Chromosome No.: 36
Useful Part: Latex 
Cera Rubber: Manihot glaziovii
Para Rubber: Hevea brasiliensis
Indian Rubber: Ficus elastic
Panama Rubber: Castiolla elastic
Guayul Rubber: Parthenium argentatum

Two species mostly grown worldwide