eChapters

Bioclimatology examines relationships between climate and living organisms, including crops, livestock and humans. It draws on biology, ecology, meteorology, architecture and physiology to explain how temperature, humidity, radiation and wind influence development, comfort, health and productivity. This chapter introduces bioclimatic indices such as the Temperature-Humidity Index, Humidex, wind chill and thermal-comfort measures. Agricultural applications include crop and livestock suitability, heat-stress assessment, housing design, work planning and development of resilient farming systems. Understanding biological responses to climatic conditions supports appropriate management interventions and helps protect productivity and welfare. Bioclimatic analysis therefore connects atmospheric conditions with practical decisions involving plants, animals and people.

15.1 Introduction

Color of food is the most sensitive part of any commodity as it is the one of the organoleptic characteristic to be noticed and one of the main ways of visually assessing a food before it is consumed. The people associate certain colors with certain flavors and the color of food can influence the perceived flavor in anything from confectionary to beverages. For this reason, food manufacturers add dyes to their products. Sometimes the aim is to simulate a color that is perceived by the consumer as natural, such as adding red coloring to glace cherries, but sometimes it is for effect, like the green ketchup that was launched by Heinz in 2000. If the flavor of a food product is inconsistent with the color, the flavor can often be perceived incorrectly, for example an orange flavored drink colored green could be perceived to taste of lime. In addition, the color of a food substance is important indicator of its freshness. While all of us are aware that food with bright or unnatural colors likely contains food coloring but only few people know that natural foods such as oranges and salmon are sometimes also dyed to mask natural variations in color. The color variation in foods throughout the seasons and the effects of processing and storage often make color addition commercially advantageous to maintain the color expected or preferred by the consumer. Some of the primary reasons include:

For many soil borne diseases, effective and economic control methods are not available. Several soil borne pathogens have developed resistance to many fungicides. The beneficial microbes are also affected by fungicides. Many fungicides pose health hazards by polluting food and water and cause direct toxicity of heavy metals and carcinogenic risk. In the context of growing worldwide awareness of environmental pollution and development of fungicide resistant strains of pathogens, biological method of suppression of disease causing organisms have been recognized as the safest approach for plant disease management.

Biological control of plant diseases is the suppression of populations of plant pathogens by living organisms. Amongst beneficial microorganisms, isolates can be selected which are highly effective against pathogens and can be multiplied on artificial media. Application of such selected and mass produced antagonists in high densities once or several times during a growing season is called “augmentative biological control”.

Bioconversion refers to the recycling and reprocessing of organic waste materials using the system of biological decomposition or biodegradation into value added products. Composting is one way of conversion of organic waste into manures. It is defined as a method of solid waste management whereby the organic component of the solid waste stream is biologically decomposed under controlled conditions to a state in which it can be handled, stored or applied to the land without adversely affecting the environment.

Composting provides a partial solution to an issue of great concern in many communities. All around the world, landfills are filling up, garbage incineration is becoming increasingly unpopular, and other waste disposal options are becoming ever harder to find. Composting provides a way not only of reducing the amount of waste that needs to be disposed of, but also of converting it into a product that is useful for agriculture. Composting reduces waste, makes us less dependent on landfills, and decreases greenhouse gas emissions. Composting recycles essential nutrients back into the soil and promotes a prolific soil ecosystem.

Abstract

With increasing population and subsequent human requirements; the generation of municipal solid waste (MSW) has increased all over the world. In India, the safe disposal of the municipal solid waste still remaines a problem for the authorities concerned. Depending upon the nature and type of the MSW, there are physical and chemical methods for the disposal of the waste, but these methods have their own limitations. Those limitations may be overcome by biological methods. Higher number of microorganisms are present in MSW which may either be pathogenic or nonpathogenic. These microorganisms may play a vital role in bioconversion of MSW into compost. The compost thus produced is useful in increasing soil fertility and reducing the concentration of the waste.

Introduction

More than a third is covered by drylands in the terrestrial land surface, which have a harsh and vulnerable natural condition (Maier et al., 2014). Due to insufficient water availability, dry areas have a scant population of vascular plants, as well as poor availability of the nutrient turnover with poor availability of the resources as a result of severe temperatures (Adeel, 2008). Biological soil crusts or Biocrusts commonly protects the soil surface in dry environments and it is considered “ecosystem engineers” of arid and semiarid areas, as well as signs of ecosystem health (Briggs and Morgan, 2011; Bowker et al., 2008). They are connected in dryland ecosystem restoration level or degradation (Assouline et al., 2015). When compared to chemical or physical crusts, biocrust is the largest word that explicitly implies that these are the crusts which are dependent on the living organisms’ activity.

Abstract

Cultural knowledge on food and beverages is as old as human civilization. However, the traditional knowledge related to food habits and ecosystem conservation has been found to be unique in each cultural and ethnic group across the world. From time immemorial, the Nyishi tribe of Arunachal Pradesh has developed an unique set of traditional knowledge that allows the better utilization of food bioresources of their natural surrounding to sustain their livelihood. Historically, such knowledge was transmited through customary laws, folklore, and oral literature. Literature studies have revealed the lack of scientific investigation on ethnobiology of traditional food bioresources used by the Nyishi tribe of Arunachal Pradesh. Hence, in the present investigation, an attempt has been made to unveil the hidden age-old cultural food and beverage knowledge practised among the Nyishi of Papum Pare and Lower Subansiri district of Arunachal Pradesh. A total of 63 plant and 41 animal species have been reported during field survey in 4 circles covering a total of 12 different localities which includes rural, semi-urbans and urban type ecosystem in the 2 selected districts.

Abstract

Mahua (Madhuca spp.) is an important tree in India, with high socio-economic, environmental and spiritual values. We carried out this study among the local communities of Azamgarh district (eastern Uttar Pradesh) and with the Gond and Baiga tribes from Raisen and Dindori districts, Madhya Pradesh. Among the five mahua species found in Indian subcontinent, Madhuca latifolia is widely distributed in the north and central plains, the focal area of our study. Mahua has been vital to the survival of these communities, particularly the Gond and Baiga tribes, from the time immemorial. It has been a major source of food energy in the form of sugar, seed oil and alcohol. As well, different parts of the tree are used as ethnomedicine. The tribal people’s high regard for mahua is reflected by its sustainable and regulated use. In this study, we present an in-depth analysis of conservation, management and sustainable use of mahua, and also suggest its role in socio-economic adaptation, with particular reference to climate change.

The growing concern over the environmental impact of traditional packaging has led to increased interest in biodegradable and edible packaging solutions. These innovative approaches offer sustainable alternatives to conventional materials like plastic, which can persist in the environment for hundreds of years. Biodegradable packaging decomposes naturally, reducing pollution and landfill waste, while edible packaging provides an additional layer of sustainability by allowing consumers to eat the packaging along with the food) These solutions not only address waste management issues but also respond to changing consumer preferences for environmentally friendly products. This chapter explores the importance of sustainable packaging, the different types of biodegradable and edible materials available, and the challenges and future potential of these eco-friendly options.

Pesticides are the chemical substances that kill pests and herbicides are the chemicals that kill weeds. In the context of soil, pests are fungi, bacteria, insects, worms, and nematodes etc. that cause damage to field crops. Thus, in broad sense pesticides are insecticides, fungicides, bactericides, herbicides and nematicides that are used to control or inhibit plant diseases and insect pests. Although wide-scale application of pesticides and herbicides is an essential part of augmenting crop yields; excessive use of these chemicals leads to the microbial imbalance, environmental pollution and health hazards. An ideal pesticide should have the ability to destroy target pest quickly and should be able to degrade nontoxic substances as quickly as possible.

The ultimate “sink” of the pesticides applied in agriculture is soil. Soil being the storehouse of multitudes of microbes, in quantity and quality, receives the chemicals in various forms and acts as a scavenger of harmful substances. The efficiency and the competence to handle the chemicals vary with the soil and its physical, chemical and biological characteristics.

Abstract

Various cropping systems and ecologies illustrate the positive use of chemicals both as fertilizers and pesticides and organic/biological sources within the frame work of Integrated Plant Nutrition and Plant Protection System (IPPS). While considering the organic/biological sources, green manures seem to be the best alternative that may largely suffice to the organic matter requirements of the soil under crop cultivation. Green manuring can be defined as a practice of ploughing or turning into the soil undecomposed green plant tissues for the purpose of improving physical structure as well as fertility of the soil. “Green manure” refers to fresh plant matter, which is added to the soil largely for supplying the nutrients contained in its biomass. The agricultural practices consisting of growing and ploughing under a green crop or addition of a green organic matter in the form of leaves and other succulent parts from outside to improve soil productivity is known as green manuring. In this review, advantages of green manuring, decomposition of green manure,   process of decomposition, factors affecting decomposition and effects of green manuring have been discussed in detail.

8.1 Introduction

Rising petroleum prices, increasing threat to the environment from exhaust emissions and global warming have generated an intense international interest in developing alternative non-petroleum fuels for engines. The use of vegetable oil in internal combustion engines is not a recent innovation. Rudolf Diesel (18581913), creator of the diesel cycle engines, used peanut vegetable oil to demonstrate its invention in Paris in 1900. In 1912, Diesel said, “The use of vegetable oils as engine fuel may seem negligible today. Nevertheless, such oils may become, in the passing years, as important as oil and coal tar presently.” Nowadays, it is known that oil is a finite resource and that its price tends to increase exponentially, as its reserves have being decreasing¹.

India ranks sixth in the world in total energy consumption and needs to accelerate the development of the sector to meet its growth aspirations. The country, though rich in coal and abundantly endowed with renewable energy in the form of solar, wind, hydro and bio-energy has very small hydrocarbon reserves (0.4 % of the world’s reserve). India, like many other developing countries, is a net importer of energy, more than 25 percent of primary energy needs being met through imports mainly in the form of crude oil and natural gas. The rising oil import bill has been the focus of serious concerns due to the pressure it has placed on scarce foreign exchange resources and is also largely responsible for energy supply shortages. The sub-optimal consumption of commercial energy adversely affects the productive sectors, which in turn hampers economic growth².

7.1 Introduction

A biodiesel fuel is an environmentally friendly, renewable, biodegradable fuel that is produced at domestic facilities from vegetable oils, animal fats, or recycled grease from restaurants. In accordance with the Renewable Fuel Standard, biodiesel meets the requirements for biomass-based diesel as well as the requirements for advanced biofuels as a whole. Biodiesel is distinct from renewable diesel, also known as “green diesel.” In its pure, unblended form, biodiesel is also known as B100 or neat biodiesel. Biodiesel is used to fuel compression-ignition engines in the same way as petroleum diesel. Alternatively, biodiesel is a liquid biofuel that can be used in diesel engines alone or blended with diesel oil. The fuel is obtained through the chemical conversion of vegetable oils or animal fats combined with alcohol.

11.1 Biodiesel Chemistry

Biodiesel is a mixture of methyl esters of long chain fatty acids like lauric, palmitic, stearic, oleic and so on. It is produced by the transesterification of animal fats and vegetable oils – all of which belong to a group of organic esters called triglycerides. Typical examples are rape/canola oil, soyabean oil, sunflower oil, palm oil and its derivatives, etc. from vegetable sources, beef and sheep tallow and poultry oil from animal sources and also from used cooking oil. The chemistry is basically the same irrespective of the feedstock. The chemistry of biodiesel is given in Fig. 11.1.

Introduction

In 1990, the magnitude of fungal diversity, that is, the actual number of species worldwide, was estimated conservatively to be at least 1.5 million. Of the 1.5 million estimated fungi, it has been estimated that 14,000 species produce fruiting bodies of sufficient size and suitable structure to be considered macro-fungi which can be called mushrooms. Of these, about 50 % or 7,000 species are considered to possess varying degrees of edibility and more than 3,000 species from 31 genera are regarded as prime edible mushrooms. To date, only 200 of them are experimentally grown, 100 economically cultivated, approximately 60 commercially cultivated and about 10 have reached an industrial scale of production in many countries (Hawksworth, 2001). Of the 14,000 species of mushrooms in the world, around 700 have known for medicinal properties. Thus, mushrooms have vast prospects as sources of medicines. The early herbalists were more interested in the medicinal properties of mushrooms than in their basic value as a source of food. Humankind has constantly searched for new substances that can improve biological functions and thereby make people fitter and healthier. About 3.5 billion people worldwide, all over half of the world populations rely on plant-based medicines and dietary supplements for their primary health care. Of the plant materials involved in medicines or health tonics, quite a few are fungi. The practice of using fungi as herbal medicines can be traced in different early records of the ‘materia medica’. The earliest book on medicinal materials the “Shen Nongs Herbal” recorded the medicinal effects of several fungi such as Ganoderma lucidum, Poria cocos, Tremella fuciformis, Polyporus umbillatus and other unidentified fungi. The most famous of all work on the traditional medicines “Pen Ts’ao Kang Mu” which was compiled by Li Shi-Zhen of the Ming Dynasty recorded the medicinal fungi totaling more than twenty species, including Ganoderma lucidum, Poria cocos, Polyporus umbellatus, Lentinula edodes, Termitomyces albuminosus, Auricularia auricula, Pleurotus ostreatus, Armillaria mellea etc. A very unique insect-infecting fungus, Cordyceps sinensis, was for the first time taken as a medicinal fungus in the book “Essentials of Materia Medica”. There have been new discoveries and developments in the field of medicinal fungi, which have greatly enriched the treasure house of our traditional medical and medicinal sciences. As a result of large number of scientific studies on medicinal mushrooms in the past three decades, the traditional uses of many mushrooms have been confirmed and new wider uses found. Some traditionally important and leading medicinal fungi in the Oriental medicines are presented below

Abstract

Irrigation tanks (Traditional water harvesting structures) are our heritage handed over to us by our ancestors and are the lifelines of villages. Tanks are small irrigation structures predominantly serve small and marginal farming communities to sustain the agriculture production by supplementing the monsoon rains. There will be festivities in the villages if its irrigation tanks get filled. A proper maintenance of the tanks will prevent famine, starvation and unemployment and bring in prosperity. In most of the Southern states in India, the major threats to tanks are mainly from the encroachers, inefficiency in the functioning of tank system and improper use by the government itself. Tank irrigation in Andhra Pradesh has played a vital role in the development of its agricultural economy. There are around 79,000 small and minor irrigation tanks providing water for irrigation and domestic use, supporting grazing land, fuel wood growth and ground water recharge. Many of these tanks are hydrologically linked in chains (called tank cascades) that cut across administrative boundaries. With deteriorating tank systems, marginal and small farmers are increasingly at the mercy of monsoon and are forced into a cycle of deprivation and debt. These ancient irrigation systems still function as a crucial element in supplying water for agriculture, and they constitute one of the richest sources of wetland biodiversity in the country. A tank system in a cascade has a small reservoir catchment, the reservoir, a strip of trees downstream of the reservoir that act as wind-breaking barrier, paddy fields, and the village. The village tanks play significant role in food production sector and provide employment in the rural sector. In addition to providing irrigation water, the tanks made the micro-climate pleasant and cool, provided a rich biodiversity and agro-biodiversity

Anacardium occidentale is a medium-sized tree, spreading, and evergreen, much branched; grows to a height of 12 m. When grown on lateritic, gravelly, coastal sandy areas, it rarely exceeds 6 m and develops a spreading habit and globose shape with crown diameter to 12 m but, if grown inland on loams; it reaches 15 m tall and is much branched, with a smaller (4-6 m) crown diameter. The root system of a mature A. occidentale, when grown from the seed, consists of a very prominent taproot and a well developed and extensive network of lateral and sinker roots. Leaves simple, alternate, coriaceous, glabrous, obovate, rounded at ends, 10-18 x 8-15 cm, with short petiole, pale green or reddish when young and dark green at mature. Rai and Vatsala (1985) studied the dermal morphology and stomatal ontogeny of Spondias pinnata Kurz., Lannea coromandelica (Houtt.) Merr., Anacardium occidentale L., Holigarna arnottiana Hook. F. and Mangifera indica L. are studied. The cuticle is thick in H. arnottiana, A. occidentale and M. indica, but is thin in S. pinnata and L. coromandelica. Based on the shape of epidermal cells, the five species are categorised into three: cells in both upper and lower epidermis sinuous (A. occidentale, H. arnottiana, S. pinnata); upper sinuous and lower polygonal (M. indica) and upper polygonal and lower sinuous (L. coromandelica). Stomatal ontogeny aperigenous (L. coromandelica), paramesoperigenous (A. occidentale) and anisomesogenous (M. indica, H. arnottiana). S. pinnata is peculiar in that it possesses three different types of stomata, aperigenous, hemiparamesoperigenous and paramesoperigenous; whereas, in all the other four species, only one type of stomatal ontogenesis exists. Except S. pinnata, all the other species possess epidermal appendages. Unicellular trichomes occur in A. occidentale and H. arnottiana, and multicellular glandular trichomes in A. occidentale, M. indica and L. coromandelica. The multicellular hairs are found in A. occidentale in specialized pockets in two rows on either side of the major veins - a unique feature which is reported for the first time.

The word biodiversity refers to the variety of living organisms (flora and fauna). Biodiversity or Biological diversity is defined as the variability among all living organisms from all sources, including terrestrial, marine and other aquatic ecosystems and ecological complexes of which they are part. Wilson, 1988 defined ‘Biological diversity’ or ‘biodiversity’ as that part of nature which includes the differences in genes among the individuals of a species, the variety and richness of all the plant and animal species at different scales in space i.e. local, regional, country wise and global, andvarious types of ecosystems- both terrestrial and aquatic-within a defined area.

The diversity of agro-ecosystems

Biological diversity deals with the degree of nature’s variety in the biosphere. This variety can be observed at three levels i.e., genetic, species and ecosystem.

a) Genetic Diversity

Genetic diversity refers to the variation at the level of individual genes. Tremendous amount of genetic diversity exists within individual species. This genetic variability is responsible for the different characters in species. Genetic diversity is the raw material from which new species arise through evolution. Today, the genetic diversity is made use to breed new crop varieties, disease resistant crops.

Organic producers, on the other hand, are looking for varieties that are suited to their local climatic and soil conditions and are not susceptible to disease and pest attack. Research has shown that in general these characteristics are more likely to be found in the older native cultivars. For example, conventional wheat grown in an organic system will have reduced protein content, whereas the selection of a variety suitable for the particular growing conditions will provide higher protein, and thus higher baking quality wheat to be grown. Research has also indicated that yields and disease resistance are better in native cultivars as opposed to modern varieties for vegetables (tomato, cucumber and melon) grown in an organic system.

Biodiversity provides the building blocks for sustainable food, health and livelihood security systems. It is the feedstock for both the biotechnology industry and a climate-resilient farming system. Because of its importance for human well-being and survival, a Convention on Biological Diversity (CBD) was adopted at the UN Conference on Environment and Development held at Rio de Janeiro in 1992. The Convention’s triple goals are conservation, sustainable use, and equitable sharing of benefits. CBD defines biological diversity as follows:

Variability among living organisms from all sources including, inter alia, terrestrial, marine and other aquatic ecosystems and the ecological complexes of which they are part; this includes diversity within species, between species and of ecosystems.