eChapters

It is a non-accelerated frictionless horizontal motion where pressure gradient balances coriolis acceleration as shown in Fig.4.1 in both the hemispheres.

1. Introduction
The environment and human health are seriously threatened by contaminants,both organic and inorganic, whose prevalence and persistence have beensteadily rising in recent years. In addition to propelling economic and scientificadvancement, the industrial revolutions of the 19th and 20th centuries have alsoled to widespread pollution (Wuana & Okieimen, 2011; Singh et al., 2013).Industrial activity has increased trace metal concentrations in the environment,with sediments acting as key sources and reservoirs for heavy metals. Thesemetals build up in soils and aquatic bodies as a result of scouring, erosion,rainfallleaching, wastewater discharge, and atmospheric deposition (AlonsoCastillo et al., 2013). Additionally, toxic contaminants like phenols, industrialeffluents, domestic wastewater, agricultural runoff, fly ash, fertilizers, andwaste from insecticides, pesticides, and pharmaceutical industries infiltratethe environment and food chain via mechanisms such as bioaccumulation,biomagnification, and bioconcentration (Arora & Bae, 2014; Azubuike et al.,2016).

The use of sampling in making decisions about an aggregate (or population) is possibly as old as civilization itself. Sampling is first broadly classified into two categories known as subjective and objective. Any type of sampling which depends upon the personal judgement or discretion of the sampler himself, is called subjective sampling. But the sampling method which is governed by a sampling rule or is independent of the sampler’s own judgement is known as objective sampling. The main difficulty with subjective sampling is that the sampler is ignorant of the degree of representativeness of his sample or the accuracy of the final estimates of the population values obtained.

Objective sampling is further subdivided as non-probabilistic, probabilistic and mixed. In non-probabilistic objective sampling, there is a fixed sampling rule but there is no selection probability attached to the sampling unit e.g. selection of every 10th individual from a list, starting with the first, or selecting every 10th line in a paddy field. If however, the selection of the first individual is made in such a manner that each of the first 10 gets an equal chance of being selected, it becomes a case of mixed sampling, partly probabilistic and partly non-probabilistic). On the other hand, if for each individual unit there is a definite pre-assigned probability of being selected, the sampling is said to be probabilistic sampling.

Introduction

The first application of atomic absorption spectra to chemical analysis was made just over 100 years ago by Kirchoff (1860), who demonstrated the presence of various elements in the solar atmosphere. He and Bunsen, demonstrated shortly afterwards that atomic spectra, whether in emission or absorpiton, could be the basis of a powerful method of chemical analysis. Walsh (1955) recognized the potential advantages of the absorption method over emission method and devised simple and versatile apparatus applicable to the routine analysis of solutions of a wide range of elements. Alkemade and Milatz (1955) published papers describing the application of atomic absorption  techniques to chemical analysis.

Use of medicinal plants is as old as human civilization. India has a glorious tradition of health care system based on plants, which dates back to vedic era. Rig Veda , the oldest known repository of human knowledge and wisdom (4500-2500 B.C.) mentions about several medicinal plants used by the Aryans while in Atharva veda (2500-2000 B.C.) elaborates description of medicinal plants is given. Later, in Samhita period, the science of medicine systematically organized with clear concept and theories based on the treatises like Charak Samhita – 2000 B.C. and Sushruta Samhita – 1000-800 B.C (Maiti, 2008). Traditionally medicinal plant communities depended on plants to meet their basic needs over centuries. The pharmaceutical industry views plant wealth as a source of income. The modern medicine world perceives plants as a panacea for many ills. Despite this, there is no consolidated strategy to conserve medicinal plants for their use (Purohit and Vyas, 2005).

Technical and Economic Challenges in Advanced Packaging The implementation of advanced packaging technologies comes with a range of challenges. Technically, developing materials that are both highly effective and environmentally friendly is a complex task. Packaging must not only protect products and ensure their safety, but also minimize its ecological footprint. From an economic perspective, these advanced solutions tend to be more expensive, which can make it difficult for smaller businesses or those in cost-sensitive markets to adopt them on a large scale. Furthermore, the need for efficient production methods, scalable new materials, and affordable solutions continues to be a significant hurdle for the industry. Balancing Performance with Environmental Goals One of the primary challenges in packaging is achieving

3.1 Introduction
Out of all methods of sampling, the most commonly used procedure in surveys is the stratified random sampling. When population units are of heterogeneous nature and if we select a sample using SRSWOR scheme then the sample selected may not be the representative sample and the estimate worked out from that sample will not be the reliable estimate of the population parameter. The estimate of sampling variance of the sample estimator obtained from that sampling scheme may happen to be very high leading to get a less precise estimate of the parameter. In such type of population, to overcome these draw backs, we use another sampling scheme known as stratified random sampling which is defined as follows.

Flowers blooming in a garden can be preserved by drying them for use in arrangements, decorations and various other applications. Natural dry flowers can be annual or perennial. Some of the important annuals used for dry flower making are described below.

14.1 Annual Flowers

Plants classified as annuals are those that complete their life cycle within the space of one year. Annual flowers are versatile and sturdy. The annuals have many uses in landscaping. Annual flowers are beautiful and garden lovers tend to preserve these flowers throughout. They dry these flowers and store them for use in several beautiful dry flower arrangements.

CARBOHYDRATES AND SUGARS

Carbohydrates which include sugars and starches are among the most important of the food stuffs as well as the simplest of organic foods. They may be divided into three groups.

Group – I

Monosaccharides  : These are simple sugars that cannot be split into any simpler forms. The principal ones are glucose or dextrose, fructose and galactose. Glucose sometimes known as dextrose or grape sugar is found widely distributed in nature, especially in fruits and vegetables, and is one of the main constuents of honey.

It is in the form of glucose that sugar appears in the blood and is being burned continuously to produce energy. A certain amount of surplus glucose is absorbed from the digestive tract and stored in the liver as glycogen, which can be converted back into glucose when the need for more fuel arises. In the presence of yeasts, glucose undergoes fermentation and changes into alcohol.

Definition

It is one of the important portion of milk which forms a fatty layer on top of milk when left un-disturbed. It is a prime component of milk and comprises mainly of milk fat. It may be defined as “that portion of milk which is rich in milk fat” meaning portion of milk into which larger portion of milk fat has been gathered.  According to FSSAI, 2011 Malai and Cream are defined as –

Malai means the product rich in butter fat prepared by boiling and cooling cow or buffalo milk or a combination thereof. It shall contain not less than 25.0 per cent milk fat.

Milk is the one food for which there seems to be no adequate substitute. It constitutes almost the entire diet for the young of all mammals. Each species produces milk that is especially adapted to the growth of its own young, but milk from one species may be used as food for others. Since animals were domesticated centuries ago, the milk from various species such as cow, buffalo, goat and camel, has been used in the diets of people throughout the world. Only cows milk is of commercial importance in the United States, although small amounts of goat’s milk are sold.

Whole cow’s milk is approximately 88 percent water, 5 percent carbohydrate, 3.5 percent protein and 3.3 percent fat. Its nutrient content varies from species to species, from breed to breed, seasonally and even from the beginning of the milking to the end of the process. In the United States it is cow’s milk that is used commonly as a beverage and in food preparation. Therefore the milk discussed throughout this chapter is cow’s milk.

The District-wise weekly agroadvisory service based on medium range weather forecasting (3 to 10 days) has been made operational by the State Agricultural Universities in collaboration with National Centre for Medium Range Weather Forecasting (NCMRWF), India Meteorological Department. The Agroadvisory Bulletin (AAB) contains three parts. The first part of AAB consists of weather events occurred during the past week and weather forecast for three days ahead. These forecasts provide expected weather on cloud amount, rainfall, average wind speed, wind direction, maximum and minimum temperatures and cumulative rainfall. The second part contains the factual information on the varieties of crops, their state and stage, ongoing agricultural operations and occurrence of insect pest and diseases of crops.

15.1 INTRODUCTION

Vegetables are rich sources of many essential micronutrients, including vitamin C, vitamin K, folate, thiamine, carotenes, minerals, and dietary fibre. In addition, vegetables are rich in health related phytochemicals, such as antioxidants. Such phytochemicals play an important role in reducing the risk of many chronic diseases. Therefore, it is essential to produce more vegetables to feed our ever growing population. In this context, use of genetically improved, disease resistant and high yielding varieties in precision farming may play a significant role in increasing vegetable productivity and production.

15.2 EXPLOITATION OF GENETIC RESOURCES

The genetic resources of a crop may be defined as the sum total of hereditary material, i.e., all the alleles of various genes present in a crop species and its wild relatives. Genetic resources are broadly grouped into two major types (i) cultivated germplasm, and (ii) wild germplasm. Alternatively, they may be termed as (i) indigenous (from the country in question), or (ii) exotic (from another country) based on their place of origin. Genetic resources consist the following five types of materials: (1) land races, (2) obsolete varieties, (3) modern varieties or varieties in cultivation, (4) breeding lines, and (5) wild forms and wild relatives.

Successful crop production both in the rainfed and irrigated ecosystems depends on timely onset of monsoon, its distribution during the crop life cycle and collection of water in various storage structures viz; tanks, reservoirs and ground water table. It is therefore important that adequate supplies of water should be developed to sustain life. Development of water supplies should, however, be undertaken in such a way as to preserve the hydrological balance and the biological function of our ecosystems.

Consequently, the human endeavour in the development of water sources must be within the capacity of nature to replenish and to sustain. If this is not done, costly mistakes can occur with serious consequences. The application of innovative technologies and the improvement of indigenous ones should therefore include management of the water resources to ensure sustainability and to safeguard the source against pollution.

As land pressure rise, cities are growing vertical and in country side more forest area encroached and being used for agriculture. In India small farmers depends on monsoon where rainfall is from June to October and much of the precious water is soon lost as surface runoff. While irrigation may be the most obvious response to drought, it has proved costly and can only benefit a fortunate few. There is now increasing interest in the low cost alternative-generally referred to as “Rain Water Harvesting (RWH)”.

Water harvesting is the activity of direct collection of rainwater, which can be stored for direct use or can be recharged into the ground water. Water harvesting is the collection of runoff for productive purposes.

Rivers, lakes and ground water are secondary source of water. In present times, we depend entirely on such secondary source of water. In the process, it is forgotten that rain is the ultimate source that feeds all these secondary sources and remain ignorant of its value. Water harvesting is to understand the value of rain, and to make optimum use of rainwater at the place where it falls.

6.1. Speed Detection of Pests in China for Phytosanitary Programme

Phytosanitary procedures such as pest detection and identification rely on technology. With the rapid development of science, it is necessary for national plant protection organizations to keep informed and to make diagnoses more sensitive and accurate. Previous general pest detection methods frequently have limitations for the diagnosis of quarantine pests. In the past ten years, China has conducted considerable research into how to improve its diagnostic measures and methods.

6.1.1. General Pest Detection Measures and Methods

Traditional determination of morphology by microscope is used mostly to detect fungi and adult insects. The morphological method may be used, for example, in the separate identification of wheat dwarf bunt (Tilletia controversa), wheat karnal bunt (T. indica) and wheat common bunt (T. tritici). On the other hand, it is hard to detect seed-borne pests using the morphological method.

Isolation culture is also used to detect fungi and bacteria in China. It is an effective method for detecting seed-borne disease or systemic infection. However, it takes a long time (more than 1-2 weeks). Inoculating the indicated plant (a healthy plant that is a host for the suspected pest organism) is used mainly to identify viruses. This was the principal and time-consuming detection method used before immunological and molecular biological methods were developed. Because viruses are very important kinds of quarantine pests of young plants, effective and rapid methods for detection were urgently needed.

8.1 Introduction
We have already discussed in details how different sampling schemes can be employed to draw the representative samples suitable to many kinds of population whose sampling units differ in nature. From practical view points, however, it is often more important to be able to make decision about certain unknown characteristics of the population on the basis of informations available in the representative samples which are drawn from the parent populations. Such decisions taken, are known as the “Statistical decisions”. For example, we may wish to decide on the basis of sample data whether (i) One educational system is better than the other or not, (ii) A given six faced die is unbiased (balanced) or not, (iii) A new insecticide is really effective to control the attack of insects or not? etc. Such problems are dealt with in the theory of statistical decisions which uses the principles of sampling theory.

Nursery is a place where planting material, such as seedlings, saplings, cuttings, etc., are raised, propagated and multiplied under favourable conditions for transplanting in prepared beds. In other words, “A vegetable nursery is a place or an establishment for raising or handling of young vegetable seedlings until they are ready for more permanent planting.” There are some vegetables whose seed need to be sown directly in the main plot such as cowpea, okra, bottle gourd, bitter gourd, pumpkin, sponge gourd, ridge gourd, peas, beans, and similar others. Similarly, certain vegetables cannot grow by seeds directly and need to multiply by vegetative means like pointed gourd, ivy gourd, kakrol, kartoli, garlic, zinger, colocasia, Aravi, water chestnut etc.