eChapters

INTRODUCTION

Anatomy is the branch of biological science which deals with the form and structure of organisms. The word “Anatomy” is derived from Greek, means cutting apart (Ana –separate, tomy-cut).

The study with unaided eye is Gross Anatomy / Macroscopic anatomy while the study of finer details of structure with the aid of a Microscope is Histology / Microscopic Anatomy.

SCAPULA

OX: It is a flat, triangular bone situated on the antero-lateral part of the thorax. It is directed obliquely downward and forward. It has two surfaces, three borders and three angles.

The lateral surface is traversed by the scapular spine which divides it into the supraspinous and the infraspinous fossae. The spine is rough and tuberous in the middle and is prolonged downwards to form the acromion process (Fig.2.1). The medial surface presents subscapular fossa and its upper part presents anteriorly a triangular rough area and posteriorly a rough line (Fig.2.2).

Skull: The skull of domestic animals has two sets of bones i.e facial and cranial bones. The facial bones are placed in front and cranial bones are placed caudally.

Facial bones: The paired facial bones are premaxilla, maxilla, nasal, pterygoid, lacrimal, turbinates, malar and palatine bones. The unpaired facial bones are mandible, hyoid and vomer.

Thoracic Vertebrae

Ox: Thoracic vertebrae characterized by well developed neural spines, short bodies with capitular facets and transverse processes with tubercular facets for articulation with the ribs (Fig.4.1).

LUMBAR VERTEBRAE

Ox: The lumbar vertebrae are characterized by elongated flattened transverse processes (projecting outwards) and large, strongly curved articular processes (Fig.5.1a). The body is constricted in the middle and expanded at the extremities. The anterior extermity is less convex and posterior is less concave. The posterior vertebral notches are much deeper. The intervertebral foramina are often double in the anterior part of the series and are very large further back.

OS COXAE

Ox: The os coxae or hip bone consists of 3 flat bones i.e ilium, ischium and pubis which fuse together to form the acetabulum.

Ilium: is largest of the 3 parts. It shows three surfaces, three borders and three angels. The lateral (gluteal) surface presents gluteal line parallel to cotyloid border. The medial surface consists of rough medial triangular part, the sacral surface for articulation with sacrum and a smooth quadrilateral part, iliac surface. The iliopectineal line separates these surfaces and bears psoas tubercle in its middle (Fig. 6.1).

Rust

The rust of wheat has been studied more than any other disease in the world. In India, K.C Mehta and his associates studied this disease with exemplary zeal. Three rusts of wheat are known. These are Black stem rust, caused by Puccinia graminis tritici, Brown rust (leaf rust), caused by Puccinia recondita, and Yellow rust, caused by P? striiformis. Brown and yellow rusts cause more damage thant the black rust, because of early appearance in the season.

Diagnostic Symptoms

• Practically all above ground parts are affected, but stalks are the main targets of stack.

• Spindle leaves (third or fourth) starts drying.

• Further stalks becomes discolored and hollow.

Diagnostic Symptom

• Circular to oval, dark brown to black spots appear on the leaves.The spots enlarge into round to irregular spots with concentric rings and coalesce causing blighting and withering of leaves.

• These are surrounded by chlorotic zone with grey white necrotic center.

Diagnostic Symptoms

• Intially chlorotic (yellowed) lesions and sometimes galls appeared on the upper leaf surface.

• There are corresponding white blister-like dispersal pustules of sporangia on the underside of the leaf.

Diagnostic Symptoms

• At first pale-green chlorosis, typically appear on lower leaves and extending up the plant.Leaves eventually take on a dull-yellow colour, wilt and the plant collapses and dies.

Diagnostic Symptoms

• Symptoms can occur at both the seedling and plant developmental stages and appear as patches in the field

• It usually occurs near or at the reproductive stages (flowering to podfilling) of crop growth

Wilt

Fusarium oxysporum f.sp. vasinfectum

Diagnostic Symptoms

• Disease affects the crop at all stages.

Powdery Mildew

Erysiphe polygoni

Diagnostic Symptoms

• At first symptom appears on leaves.

• White floury patches appear on both surface of leaves as well as tendrils, stem and pod.

Anthracnose

Colletotrichum gloeosporioides (Glomerella cingulata)

Diagnostic Symptoms

• Disease produces symptoms like leaf spot, blossom blight, withertip, twig blight and fruit rot

• Symptoms on leaves show as gray to brown spots with dark margins and a yellow halo. The spots later enlarge and coaleasce to form sizable necrotic areas.

Gummosis

Phytophthora spp

Diagnostic Symptoms

• Dark water soaked large patches appear on the basal portions of the stem near the ground level.

Downy Mildew

Plasmopara viticola

• Downy mildew of grapes was catastrophic in France in 1878.

Scab

Ventruia inaequalis (Spilocaea pomi Fr?)

Diagnostic Symptoms

• Symptoms generally noticed on leaves and fruits.

Leaf Curl

Taphrina deformans

Disease Symptoms

• Initially yellowish to reddish areas appear on leaf blade of young leaves in the spring.

Leaf Spot

(Mycosphaerella fragariae teleomorph, Ramularia brunnea Peck anamorph)?

Disease Symptoms

• Older leaves usually show purple spots (3-6 mm in diameter) on the upper surface, sometimes with a slightly darker halo

Late Blight

Phytophthora infestans

• Phytophthora in Greek means “plant destroyer”(phyto=plant, phthora= destroyer).

Downy mildew

Pseudoperonospora cubensis

Diagnostic Symptoms

• Yellow, angular spots restricted by veins resembling mosaic mottling appear on upper surface of leaves .

Purple blotch

Alternaria porri

Diagnostic Symptoms

• Disease symptoms occurs on leaf and flower stalks.

Anthracnose or Fruit Rot and Die Back

Colletotrichum capsici

Diagnostic Symptoms

Dieback symptoms

• Small, circular to irregular, brownish black scattered spots appear on leaves .

Leaf spot

Colletotrichum capsici

Diagnostic Symptoms

• Initially oblong brown spots having about 4-5 cm in length and 2-3 cm in width with grey centres surrounded with yellow hallo are found on the leaves .

Stem gall

Diagnostic Symptoms

• Symptom appears in the form of tumor-like swellings of leaf veins, leaf stalks, peduncles, stems as well as fruits.

• Infected veins show a swollen hanging appearance to the leaves.

Botrytis Gray Mould

Diagnostic Symptoms

• Appearance of a gray, fuzzy mold on flowers, leaves or stems of or plants. Also called, “gray mold”.

Powdery mildew

Sphaerotheca pannosa var. rosae (Sphaerotheca pannosa)

Diagnostic Symptoms

• A white, powdery fungal growth on the upper, lower or both leaves and shoots.

HISTORICAL DEVELOPMENTS

Food Preservation 1782 ó Canning of vinegar was introduced by a Swedish chemist.

1810 ó Preservation of food by canning was patented by Appert in France. ó Peter Durand was issued a British patent to preserve food in ìglass, pottery, tin or other metals or fit materials.î The patent was later acquired by Hall, Gamble, and Donkin, possibly from Appert.

Who discovered bacteria?

a) Leeuwen hock b) Ledge berg

c) Walkman and Zinder d) None

The fungi are usually:

a) Parasites or saprophytes b) Lithophytes

c) Epiphytes d) Insectivorous

According to Pasteur statements which one of the following is true

a) Living organisms discriminate between stereo isomers

b) Fermentation

c) Living organisms doesnít discriminate

d) Both a and b

The method to preserve foods in sealed glass bottles by heat in boiling water was developed by one among the following scientist?

a) Edward Jenner (1798) b) Francois Nicolas Appert (1804)

c) Lazzaro spallanzani (1765) d) None of the above

Nisin is produced by strains of

a) Streptococcus lactis b) Pseudomonas

c) E. coli d) Clostridium

The term nanotechnology, buzzword of present day science owes its origin from the Greek word ‘nano’ literally meaning dwarf. When it is expressed in terms of dimension one nanometer equals to one billionth of a meter (1nm = 10-9 m). A nanometer is a thousandth of a thousandth of a thousandth of a meter, about 60,000 times smaller than a human hair in diameter or the size of a virus, a typical sheet of paper is about 100,000 nm thick, a red blood cell is about 2,000 to 5,000 nm in size, and the diameter of DNA is in the range of 2.5 nm. Therefore, nanotechnology deals with matter that ranges from one-half the diameter of DNA up to 1/20 the size of a red blood cell. 

It all started after the famous lecture, “There is plenty of room at the bottom” given by Richard Feynman on December 29, 1959. Nanomaterials are intermediate between macroscopic solid and of atomic and molecular systems. Nanomaterials have certain properties which make them different from that of the bulk materials, including large fraction of surface atoms, high surface energy, spatial confinement, and reduced imperfections. Nanotechnology deals with various structures of matter having dimensions of the order of a billionth of a meter (Ray Unmesha. 2018). From the advent of nanotechnology, people realized that certain materials can exhibit different properties based on its size and shape.
 

Biological diagnostic methods rely on the transmission and amplification of the pathogen in indicator hosts that develop symptoms. These methods test the biological properties of pathogens and early successes in the control of intracellular pathogens were largely due to the diagnosis of the causal agents by biological tests. The sensitivity of biological/serological tests is usually determined by the minimum number of pathogen propagules required to initiate infection. Inoculation with fewer particles could lead to false negative results. Biological techniques for disease diagnosis and pathogen detection are usually highly accurate but too slow and not amenable to large-scale application. 

Agri-nanotechnology is a new branch of biology that has originated due to the compatibility of nanosized inorganic and organic particles with biological functions. Based on enhanced effectiveness, the new age drugs are nanoparticles of polymers, metals, or ceramics, which can facilitate several biological applications. Plant diseases are caused by pathogens including fungi, bacteria, mycoplasma, viruses and viroids, nematodes, parasitic plants, and protozoa. 

With the development of improved systems for monitoring environmental conditions and delivering pesticides appropriately, nanotechnology can further improve our understanding of the biology of different crops and thus potentially enhance yields. It can offer routes to plant disease diagnostics, insect-pest management and efficient pesticides utilization. Nanostructure catalysts will help in increasing the efficiency of pesticides allowing lower doses to be used. 

Biocompatible, biodegradable, intelligent and responsive materials are currently an emerging area of interest in the field of efficient, safe, and green pesticide formulation. Using nanotechnology to design and prepare targeted pesticides with environmentally responsive controlled release via compound and chemical modifications has also shown great potential in creating novel formulations. Special attention was paid to intelligent pesticides with precise controlled release modes that can respond to micro-ecological environment changes such as light-sensitivity, thermo-sensitivity, humidity sensitivity, soil pH and enzyme activity (Huang et al., 2018).

Nanoscience and nanotechnologies are set to transform the global industrial landscape, but the debate on how to regulate environmental, health and safety risks is lagging behind technological innovation. Current regulatory efforts are primarily focused on the national and regional level, while the international dimensions of nanotechnology governance are still poorly understood and rarely feature on the international agenda. With the ongoing globalization of nanosciences and the rapid expansion of international trade in nanomaterials, however, demand for international coordination and harmonization of regulatory approaches is set to increase. However, uncertainty about nanotechnology risk poses a profound dilemma for regulators and policy-makers. Uncertainty both creates demand for and stands in the way of greater international cooperation and harmonization of regulatory approaches. Falkner Robert and Jaspers Nico (2012) reviewed the emerging debate on nanotechnology risk and regulatory approaches, investigates the current state of international cooperation and outlines the critical contribution that a global governance approach can make to the safe development of nanotechnologies. 

Nanotoxicity is the study of the toxicity of nanomaterials that focuses on how the size and unique properties of nanoparticles influences their impact on plant helath, human health and the environment. Plants are essential fundamental components of all ecosystems and the interaction between nanoparticles (NPs) and plants is an indispensable aspect of the risk assessment. NP phytotoxicity, an important precondition to promote the application of nanotechnology and to avoid the potential ecological risks was reviewed (Jie Yang et al., 2017). 

Nanotechnologies are being spoken of as the driving force behind the new industrial revolution. The mass production of these nano materials and their applications mean a dramatic increase of workers dealing with Engineered Nano Materials (ENM) and becoming possibly exposed to resulting hazardous effects and increased environmental burden of the environment due to the leaks of these materials from industrial processes. It is, hence, essential to consider the importance of ENM safety and their new applications and understand that it is important for these materials and products to be safe to enable successful promotion of nanotechnology for useful applications (Eman M Osman, 2019). 

1.1. Background Introduction

We live in a world with “throw-away” societies that are involved in a pattern of consuming packaged products that don’t even last past a single use or even a year and discarding the waste. This lifestyle generating waste is negatively impacting public health, environment and imposing socio-economic problems on us. The waste is continuously consuming our land, resources, and energy for storage, management, treatment, and disposal. Solid waste was an urban issue initially but has reached every corner nowadays. 

1.1 Introduction

Increased emission of greenhouse gases results in climate change which becomes one of the most prominent environmental issues to the world today. Carbon dioxide (CO2) is the major greenhouse gas whereas nitrous oxide (N2O) and methane (CH4) are other substantial contributors to climate change (IPCC, 2014, Tongwane et al., 2016). However, these gases are emitted in minimal quantities in comparison to carbon dioxide but impart more global warming effect by absorbing more infrared radiations (Oertel et al., 2016). The warming potential of one kg of CH4 is 23 times more than one kg of CO2 while  in the case of N2O, it was nearly 300 times more than CO2 (Ramaswamy et al., 2001, Bharti et al., 2019; Biswas et al., 2010). Around one-third of methane and two –thirds of nitrous oxide come from soil (Prather et al., 1995, Tubiello et al., 2015, Smith, 2016).

3.1 Introduction

A Massive increase in population, urbanization and industrialization have led to an increase in the quantity and composition of waste. The waste is increasing day by day and is estimated to reach up to 2.2 billion tonnes by 2025, according to the reports by World Bank. It becomes a necessity for every nation to fore look upon the waste management system for their respective countries. From the collection, segregation, transportation, disposal all have become an important criterion to deal with. Among the available disposal options; the easiest and environment friendly is “Recycling”. 

4.1. Introduction

Presently, in the world, there are 195 countries according to the United Nations, and the number would even go up to 247 if we consider the disputed territories like Isle of Man, Hong Kong, etc. (United Nations, 2016) (Kershner, 2020). But the majority of the countries are still struggling to provide basic life-supporting amenities like nutrition, shelter, and employment. Conjointly, termed as emerging and developing countries such as India, Vietnam, Venezuela, Utopia, etc. (Ahmed and Shimada, 2019). Most of the developing countries are situated mainly in the continent of Africa, Asia and South America. They have got independence for the European countries like England, France, Portugal and Spain in the mid and late 20th century. 

Definitions: Before starting the chapter, it is better to understand the basic definitions of the terms commonly used in this chapter.

Waste: Waste is any material or object which is discarded after its primary use by its holder. A holder means the person who produces and keeps the waste. 

6.1 Introduction

Urbanization is now a global phenomenon, but in developing countries the implications are more pronounced. Natural growth of population, reclassifications of habitation and migration trends are important in urban population in India. The population of India, which accounts for 27 per cent of the total population, was 285 million according to 2001 census. International experience shows that the pace of urban development accelerates when a country’s urban population crosses close to 25 percent of the total population (like in India).(Kumar and Chakrabarti, 2010). 

7.1. Developing Sector in Scientific and Technological Approach of Waste Management

From the very past, many traditional practices have been put into use for waste management like landfilling, composting, and recycling, which are practiced even today. However, the boundless upsurging waste compels the modern world to modify the traditional methods or to introduce innovative techniques with the grace of technology