eChapters

Introduction

Under arid and semi-arid regions of the world, major problems are salinity, alkalinity and calcareousness, which seems further aggravate with changing climate scenario. Besides that most of the developing countries lies in this zone with flanging population resultant shrinking down of land resource and good quality of irrigation water. Globally area under saline/sodic soils is about 953mha covering 8% of the land surface. Resent estimates indicate that 6.7 mha area in India is affected by soil salinity and alkalinity and about 25% of ground waters are sodic and/or saline in the country. There are two important approaches for utilizing saline, alkali or calcareous environment. The first one is to modify the environment so as to suit the plant or modifying the plant or substitute the plant species so as to suit the environment. First approach has been used more extensively because it enables the plants to respond better not only to water but also to other production inputs and also not far sustainable. However, second option is cost effective and most sustainable.

Accumulation of excessive salt in root zone leaves adverse effect on general agricultural crops and or crop failures sometimes, while crop diversification using seed spices are the option for such conditions. Most of the seed spices particularly cumin, fennel, dill, fenugreek, ajwain, celery, anise, caraway and coriander (and their cultivars) have some degree of salinity and alkalinity tolerance. However, among the seed spices, cumin is having high degree of salinity tolerance. In case of sodic or calcareous environment, fennel is most tolerant followed by dill as well as these crops are the remedy for such degraded environment by bringing down the sodicity and calcareousness. In some cases, germination, growth, yield and quality of seed spices improved by saline sodic environment. Besides eco-friendly use of these soils, phytoremediation of saline, sodic and calcareous soils by seed spices seems most sustainable.

Introduction

The hot arid regions of India are spread over 32 million ha (0.32 million Sq.Km.) in the state of Rajasthan (61%), Gujarat (20%), Andhra Pradesh (7%), Punjab (5%), Haryana (4%), Karanataka (3%), and Maharashtra(0.4%) which are characterized by hostile agro-climatic conditions and fragile eco-system. Out of total hot arid area of the country (India), more than 60% area falls under the state of Rajasthan which covers 12 districts viz., Jaisalmer, Barmer, Bikaner, Churu, Sikar, Jhunhjunu, Naguar, Jodhpur, Pali, Jalor, Sriganganagar, and Hanumangarh of the state. In general, the hot arid region of Rajasthan receives very low rainfall, varies from 100 mm annun^-1in north-western district of Jaisalmer to 450 mm per annum in the eastern boundaries of arid district of Rajasthan. The potential evapo-transpiration varies from 2063 mm in Jaisalmer to 1503 mm in Sikar districts of Rajasthan. The rainfall is very erratic and often experienced prolong drought. The ground water table is very deep and often brackish in nature. The extremes of temperature having severe winter during December-January with temperature as low as -4 °C and very hot summer during May-June with temperature as high as 48-50 °C is another important characteristic of the hot arid regions. The solar radiation is very high. Atmospheric vapour pressure deficit reaches as high as 30 mb during summer (May-June). The wind velocity in June is very high which leads to heavy wind erosion and formation of sand dunes. Some time strong sand storms of very high speed (60-0 km h^-1) with huge amount of sand particles also occurs. The soils are coarse textured with low silt, clay and humus content and water holding capacity is very low and infiltration rate is very high. The soil fertility is very poor having low organic carbon (0.02-0.06%).

1. Introduction

During the last decade, considerable attention has been focused on the involvement of oxygen free radical (OFR) in various diseases. Molecular oxygen, while providing an efficient energy from ingested food, results in free radical and peroxide by-products, which have high intrinsic toxicity. Numerous physiological processes in living organisms occasionally produce free radicals, reactive nitrogen species (RNS) and reactive oxygen species (ROS) as by-products. Their broad ranges of effects in biological systems have drawn the attention of many experimental works. ROS have been implicated in the pathophysiology of several clinical disorders, including ischemia, reperfusion injury, myocardial infarction, rheumatoid arthritis, neurodegenerative, atherosclerosis, acute hypertension, hemorrhagic shock and diabetes mellitus (Hemnani and Parihar, 1998).

Oxidative stress occurs in a cell or tissue when the concentration of reactive oxygen species (ROS) generated exceeds the antioxidant capability of the cell (Simic and Jovanovic, 1986). Although humans and other organisms possess antioxidant defense and repair systems to protect against oxidative damage, these systems are insufficient under certain conditions to prevent the damage totally (Chang and Miles, 1982). Hence, the oxygen free radicals mediated damage to protein, DNA and other biomolecules accumulates during the lifetime of organisms. Many synthetic antioxidant components exhibited toxic or mutagenic effects that have directed the attention to the naturally occurring antioxidants in recent years. A multitude of natural antioxidants have already been isolated from different plant materials such as oilseeds, cereal crops, vegetables, fruits, leaves, roots, spices and herbs (Ramarathnam et al., 1995).

ABSTRACT

A plant grows in a highly competitive environment. It is continually being threatened by other plants encroaching upon the space from which it draws its sustenance, by microorganisms, by insects, avian, reptilian or mammalian herbivores. In order to survive, each plant must draw upon a complex of defenses, which may be physical, such as Spines or Leathery Leaves or Chemical. These defenses are passive, coming into action only when the plant is attacked which repel insects or the herbivores that attempt to feed on them. Plants protect themselves from insect attack by providing a multitude of repellent chemicals including toxic and bitter alkaloids and tannins. Non-specialist insects and other animals that attempt to feed on the plant may be repelled, injured through severe gastrointestinal malfunction or even killed. The cabbage, spinach, mustard etc. are well known for their mustard pungent flavor that deters most animals from consuming it. Even most medicinal plants like Cynanchum collialatum of the family Asclepediaceae have tannins or alkaloids like “cardenolides” that repel most animals and insects. All these plants have a basic enzyme “Myrosinase” which react with these specific tannins to produce the toxic metabolite, which repels insects and animals. But caterpillars of few insects are known to tolerate these toxic alkaloids (ex: caterpillar of Striped Tiger Butterfly-Danaus genutia) and in turn sequester the toxic alkaloids into their tissues making themselves non-palatable to their enemies. We hypothesize the analysis of possible roles of toxic alkaloids isolated from these butterflies as bio-insecticides

ABSTRACT

In vitro culture and cryopreservation techniques are complementary to ex situ conservation of plant genetic resources that are vegetatively propagated or having recalcitrant seeds. An in vitro germplasm conservation study has been conducted on Banana passionfruit (Passiflora mollissima), a plant used in rural medicine. Micropropagated plants survived up to 12 weeks in Murashige and Skoog medium supplemented with 0.5% sucrose. Cryopreservation experiments were carried out on the explants (apical and/or axillary buds), pre-treated with vitrification solutions, dimethyl sulphoxide (DMSO) and PVS2 (Plant vitrification solution-2) with or without desiccation treatment and frozen in liquid nitrogen (LN). The survival and regeneration of apical buds were higher than axillary buds when pre-treated with 15% DMSO. Treatment with 20 % PVS2 for 1 h followed by 100 % PVS2 for 20 min gave maximum shoot recovery (40%) from cryopreserved apical buds. Desiccation alone was not successful but combination of pre-treatment of PVS2 (20% for 1h and 100% for 20min) with 3 h desiccation gave 30% plant survival from frozen apical buds. Regenerated shoots were rooted on MS medium with 1.0 mgl-1 naphthalene acetic acid (NAA) and 0.2 % activated charcoal.

ABSTRACT

The present study was designed to evaluate the effect of α-mangostin on cardiac markers against isoproterenol-induced myocardial infarction in rats. Induction of rats with Isoproterenol (150 mg/kg body wt, i.p) for 2 days resulted in a marked reduction in the activities of cardiac tissue marker enzymes (LDH, CPK, GOT and GPT). Pretreatment with α-mangostin (200 mg/kg of body wt/day) orally for 6 days significantly prevented these alterations and restored the enzyme activities to near normal levels. In conclusion, these findings demonstrate the protective effect of α-mangostin on isoproterenol induced experimental myocardial infarction in rats.

ABSTRACT

An efficient and reliable micropropagation and mycorrhization techniques were established for a medicinal plant Solanum trilobatum L., using internodal explant. Callus formation occurred from both the cut ends of explants cultured on MS medium supplemented with 2,4-D (3.0 mg/l). Direct shoot and multiple shoot formation were noticed from the proximal cut end of explants on BA (2.0 mg/l) alone and BA (2.0 mg/ l) + NAA (0.5 mg/l). Root formation was directly induced from the basal cut end of explants cultured on IBA (1.0 mg/l). In vitro plantlet regeneration has been achieved on BA (2.0 mg/l) + IBA (1.0 mg/l). After 4 weeks, well-developed in vitro plantlets were hardened in plastic cups filled with sterile soil and vermiculite (3:1). During acclimatization, sterile Arbuscular Mycorrhizal (AM) fungal spores were added for enhance the survivability of in vitro plants in the field condition. The level of biochemical changes and increased survivability were studied in 10 weeks old plants inoculated with spores of Glomus mosseae and Gigaspora margarita.

ABSTRACT

Indole alkaloids gramine, tyramine and tryptamine were isolated from the aerial part of Cynodon dactylon (L.) Pers. for the first time and their antimicrobial properties agains microbial pathogens were studied. Structures of the compounds were elucidated base upon the spectroscopic data such as ¹H-NMR, ¹³C- NMR and MS. The evaluations o the crude extract and the alkaloids for their efficacy in inhibiting the growth of huma pathogenic bacteria and dermatophytes were carried out in vitro. The crude extrac was effective in inhibiting the growth of all the tested microorganisms. Tryptamin and tyramine did not inhibit microbial growth when tested individually, but in combination the growth inhibition of Klebsiella pneumoniae was prominent. Gramin was the most effective one in inhibiting the growth of all the tested microbial pathogens

ABSTRACT

Nature provides a wealth of information on natural products with novel architectur and very high medical potential. Given the enormous medical and economic impac of natural product pharmaceuticals we have obvious reasons to improve the activitie of the existing compounds and to discover new metabolites. Although natural product are a proven source of drug candidates they exert powerful physiological effects in one form or other. Only a small proportion of these compounds satisfy the rigorou criteria set by the pharmaceutical company. Also the amount of active compound isolated from the natural products is so small that it is difficult to exploit it in an industrial level. So there arises a need to synthesise synthetic compounds which ma be tested for bioactivity from the easily available starting materials by a simpl methodology. The quest for finding new drugs against various diseases such as AIDS cancer etc. act as a motivating factor in designing synthesis of new materials. In thi way most of the compounds synthesized can be tested for bioactivity to be effectivel used to fi ht a ainst certain dreadful diseases.

We have synthesised some polycyclic heterocycles through cycloaddition methodology and explored the bioactivity of the products. These molecules have basic skeleton of the natural products and possess the biological properties of the natural products. Thus they may be termed as pseudo natural products. These compounds are screened for antifungal and antibacterial activities and are found to possess bioactivity.

Keywords : Heterocyclic compounds, antifungal activity, DMSO, pathogens, inhibition zone.

Abstract

Thermal properties of food are its ability to conduct, store and lose heat. These properties are inherent in food processing and preservation practices. Thermal properties are important for modelling processes, engineering design of processing equipment, sterilization and aseptic processing. Important thermal properties are thermal conductivity, specific heat and thermal diffusivity. These properties depend on chemical composition, water fraction and temperature.

Introduction

Thermal properties are involved in almost every food processing operation. It is essential to have knowledge of thermal properties of foods which is important in analysis and design of various food processes and food process equipment involved in heat transport. Thermal properties of food are greatly depending on composition, temperature and density of food. Thermal properties required for heat transfer calculation include specific heat, enthalpy, thermal conductivity and thermal diffusivity. Thermal properties of foods are related to heat transfer control in specified foods and can be classified as thermodynamic properties (enthalpy and entropy) and heat transport properties (thermal conductivity and thermal diffusivity). Thermo physical properties not only include thermodynamic and heat transport properties, but also other physical properties involved in the transfer of heat, such as freeze and boiling point, mass, density, porosity, and viscosity. These properties play an important role in the design and prediction of heat transfer operations during the handling, processing, canning, storing, and distribution of foods.

Abstract

In India, the allium groups (onion and garlic) are important bulb crops for home consumption as well as sources of income to many peasant farmers in many parts of the country. The garlic bulbs are valued for their flavor and have wide applications in food and their antimicrobial, antifungal, insecticidal and antioxidative properties. The engineering properties of garlic bulb, clove and skin plays important role in the planning of various post-harvest operations like drying, sorting, grading, bulb breaking, peeling and designing the process equipments like bulb breaker, clove separator and peeler. The aim of this chapter was to study the engineering properties viz., physical, mechanical, aerodynamic and frictional properties of garlic bulbs, and cloves in both peeled and unpeeled form.

Introduction

India is rightly the spice bowl of the world. India has the largest domestic market for spices in the world. Indian spices are the most sought-after globally, given their exquisite aroma, texture and taste. Garlic (Allium sativum L.) is a world’s favourite, versatile horticultural commodity consumed for culinary, medicinal and antimicrobial purposes and is being cultivated for over 5000 years. The most important part of the garlic plant is the compound bulb. Each bulb is made of 6-26 cloves and is wrapped in a white papery sheath. Some varieties have a radish or purplish sheath. The bulbs are valued for their flavour, command extensive commercial importance because of their wide application in food and pharmaceutical preparations. Garlic is still probably nature’s most powerful medicinal plant to us today. It is recognized to have remarkable preventive and curative abilities. Garlic is mainly used aromatic spices and pickles as it has digestive, carminative and anti-rheumatic properties. It is being used in ayurvedic formulation since a long for curing lungs, healing the intestinal ulcer and checking muscular pain and giddiness.

Presentation of data is done in form of diagram and graphs.

Diagrammatic Presentation: The data are presented in form of diagrams

The important diagrammatic presentations are simple bar diagram, multiple bar diagram, component bar diagram, percentage bar diagram & pie diagram.

Selection of diagram depends upon the nature of classification, number of characters involved and the type of comparison required to be made. In all the diagrams, the groups or classes are represented on the X-axis and the volumes or frequencies are represented in the Y-axis. The title of these visual aids should be self-explanatory.

1. Simple Bar Diagram: Simple bar diagrams consist of vertical bars of equal width. The height of these bars is proportional to the magnitude of the attribute. All bars are separated from each other by equal intervals. Simple bar diagram is used if the classification is based on attributes and if the attributes are to be compared with respect to a single character. For example, the area under different crops in a state, the production of mangoes in different years for a state, the yield of a variety at different fertilizer level, etc, can be represented by the simple bar diagram. Also the yield performance of different varieties of a crop, the effects of different treatments etc, can be compared using simple bar diagrams.

Concept of correlation was given by Karl Pearson in 1890.

The study of strength and nature of relationship between two variables is called correlation. Two variables are said to be correlated, if the change in one variable affects the other variable. Correlation is also known as covariation.

Bivariate Distribution: Distribution involving two variables is known as bivariate distribution. For example, Height and weight of persons, yield and production of a crop in.

On basis of type of association between variables, correlation is of two types:

Higher plants demand certain basic things for their growth. As many as 52 factors (basic things) influencing crop growth have been identified :

• 100 per cent of the land has sufficient CO₂ in the atmosphere and sunlight
• 83 per cent have favourable temperature
• 64 per cent have favourable topography
• 46 per cent have reliable rainfall
• 40 per cent have satisfactory fertile land

Crops: Is a cultivated plant that is grown on large scale commercially, especially cereal, pulses, fruits or vegetables.

Classification of crops : Several crop plants are alike with respect to ontogeny (Development), morphology, anatomy, physiology and requirement of environment. Classification is done to generalize similar crop plants as a class for attaining better understanding of them. Field crops are classified in several ways.

Soil is defined as a thin layer of earth’s crust which serves as a natural basic medium for the plant growth. Soil is a dynamic natural body composed of minerals, organic materials and living forms on which plants grow. Soil are formed by the weathering of rocks and minerals in presence of soil forming factors like climate, organisms, relief or topography, parent material and time (cl,o,r,p,t).The weathering of rocks and minerals are associated with physical and chemical phenomenon. The principal agents of physical weathering are temperature, water, wind, plant and animals. Chemical weathering is affected through the process of hydrolysis, hydration, carbonation, oxidation and reduction.

Each soil is characterized by a given sequence of horizons. Combining of this sequence is known as soil profile. Soil profile is a vertical section of the soil through its horizons. The layers or horizons in the soil profile vary in thickness and have different characteristics like colour, texture, structure etc. The horizons are designated by O, A, E, B, C and R.

Horizon: The layers seen in the vertical section of the soil profile are called horizons.

Cultivation involves management of physical environment to produce a favourable habitat for successful crop production. Primitive man used tools to disturb the soil for placing the seeds. The word tillage is derived from the Anglo-Saxon words tilian and teolian means to plough and prepare soil for seed sowing, to cultivate and to raise crops. Jethrotull who is considered as father of tillage suggested that ploughing is necessary so as to make the soil into fine particles.

Tillage is the mechanical manipulation of the soil either with tools and implements for obtaining conditions ideal for seed germination, seedling establishment and growth of crops.

Tillage includes all operations and practices that are used for the purpose of modifying soil physical characters. Tillage is the most difficult and time consuming operation in crop production. About 30 per cent of the total cost of cultivation goes for tillage operations.

Aonla has been regarded as a sacred tree in India. The tree is worshipped as mother earth and is believed to nurture humankind because the fruits are very nourishing. It is also known as Amrit phal. Aonla is mainly recognized due to its high nutritive, medicinal and therapeutic properties. It contains high amount of vitamin C (500-1500 mg/100 g), it is also rich in pectin, iron, calcium and phosphorous. Dried fruits of aonla can be is used in curing hemorrhage, diarrhea, chronic dysentery, diabetes, jaundice, dyspepsia, cough etc. Recently, aonla has gained more popularity in arid and semi-arid region of the country because of its hardy nature, prolific bearing capacity and ability to grow under various adversities as a remunerative crop (Shukla et al.2002). It may be an important fruit in future due to its high productivity, suitability in wasteland particularly salt affected soil and sandy soil of arid ecosystem. Aonla is the main ingredient of Chavanprash and Triphala powder which is used for curing different abnormalities. The fruit contains a chemical substance gallic acid and leucoanthocyanin which have antioxidant property.

Date palm is one of the oldest fruits and was known to man many thousand years before Christ. It is staple food of the Arabs. Large quantities of date are imported by India from the Arabian countries. Wild date palm are seen growing even up to an altitude of 1500 M (Pareek, 1990), of course they do not fruit at this altitude every year. Raw sugar and a fermented drink ‘toddy’ are prepared from the sap of this palm. In the Indians valley, date palm is believed to have been introduced by the soldiers of Alexander the great in the fourth century B.C. and some wild groves of seedling date palm are found in the coastal belt in the Kachchh district of Gujarat. Investigations to develop indigenous production of dates in India were initiated during the 1950 by the ICAR at Regional Fruit Research Station, Abohar (Punjab). Some commercial varieties of date palm were introduced from USA, Pakistan and Middle East countries during 1955-1962. The extremely dry areas comprising Jaisalmer, Barmer, Bikaner and Jodhpur in Rajasthan, Abohar in Punjab and Kachchh in Gujarat are the potential regions for the date growing in India.

Fruit drop is a premature shedding of fruitsbefore harvesting for commercial purpose. There are so many reasons for fruit drop like internal (Hormonal balance, morphological and genetical) and external (biotic and abiotic) factors. Fruit drop is very much serious in some fruits like apple, peach, currant, mango, citrus etc. Fruit drop may occur at various stages of fruit growth,starting right from fruit setting till its harvesting. It may be natural, environmental or pest related.Losses due to fruit drop at various stages have long been a serious threat to the fruit growers. After determining the actual cause of fruit drop, adoption of a suitable control measure can bring relief to the growers. Among different drops, pre-harvest drop is of great economic importance which can cause serious crop loss to farmer.

Determination of Specific Gravity

The palatability of the citrus fruit is associated with its internal quality. Measuring specific gravity provide clues to internal quality of the fruit. The ratio of the weight of the fruit to its submerged weight indicates specific gravity. Specific gravity also indicates relationship between fruit weight and volume.

Steps: To determining specific gravity

Record the weight of fruit in air on top loading balance.

Various types of winter damage can occur to fruit trees. Temperature-related injuries include sunscald, tip dieback, bud death and heartwood damage. Even after planting frost tolerant varieties and rootstocks, it is important to manage frost occurring in regions where it is suspected to happen, it is necessary to prevent injury. When temperatures dip below the freezing point, water molecules move out of plant cells through the cell membrane due to ice formation in the intercellular spaces. Other cell constituents like sugars become more concentrated within the cell and with gradual reduction in water leads to dehydration and necrosis. At relatively short and moderate freezing temperatures little damage occurs to plants, but when temperatures fluctuate drastically or descend below -4^oC, ice crystals form and intracellular freezing occurs leading to cell death. Tip dieback, bud death, and heartwood damage usually occur in situations where temperatures drop dramatically before the plant has hardened off adequately.

ABSTRACT

Expert systems are very popular computer programs designed to simulate the problem solving behavior of human thinking in a narrow domain. The world has changed into a global village. Information has become a powerful commodity and agricultural production has evolved into a complex business requiring the accumulation and integration of knowledge and information from many diverse sources. Rice is the staple food of over half the world’s population. India is the second largest producer and consumer of rice in the world. In order to remain competitive, the modern farmer often relies on agricultural specialists and advisors to provide information for decision making. In order to alleviate this problem, expert systems were identified as a powerful tool with extensive potential in agriculture. Rapid development of web technology benefits our decision-making and various activities in agriculture. With this background, web based rice expert system has been developed for diagnosing pest and disease problems of rice crop.

Key Words: Rice, Expert system, Knowledge, Decision making

Abstract

Genus Artemisia L. (Asteraceae) has a long history of use in herbal medicine, owing to the presence of rich bioactive phytochemical diversity of it constituent species. Himalaya is hub of several species and species under this genus have been traditionally used in different ways for curing ailments by inhabitants of the areas where their populations sprawl. Few species such as A. annua and A. maritima are cultivated for their use in medicine. In addition, the species of the genus have found wide usage in matters connected to digestive system especially for treatment of worms and for preparation of herbal teas. Artemisnin, a potent source of anti-malarial drug extracted from some species, is most valuable bioactive phytochemical of this genus. Other important chemical constituents include santonin and scoparine. Reported studies suggest that the bioactive constituents present in this genus shows several biological activities such as antimicrobial, anti-inflammatory, anticancerous and other allied ones activities. Expansion of range and acclimatization in new habitats is exemplary in this genus. Present work reports the ways of range expansion, economic importance, conservation strategies and future prospects of this genus.

With the culmination of green revolution, the yield in agriculture is almost static with the use of even great deal of inputs and resources with appearing decadence in nature. The agriculture, if continuous on with same trend, will no longer productive and sustainable. Heterogenity being vested with best survival and sustenance, attempt is underway towards crop diversification deploying remunerative crops and techniques so as to keep pace with rising demand of mankind. Added to this, dwindling land : man ratio (0.13 ha during 1990s), harvesting more return from a unit area of land, disguised unemployment, improper availability of fruits and vegetables (40 g and 120 g respectively as against 120 g and 280 g for fruits and vegetables, respectively), generating employment (143 man-days/ha in cereals, 860 man-days/ha in fruit production and 1000-2500 man-days/ha in cultural intensive fruit crops), are major concerns for high density planting (HDP). It is a holistic production system which helps in promoting and preserving dynamic agro-ecosystem. HDP is also an aid to biodiversity, biological cycles and organic farming. As an alternative to raise production and productivity especially to compete global trade, HDP is worth adoption.

The arid zone eco-system of Rajasthan is very fragile and is prone to serious imbalance even with the slightest disturbance due to mismanagement of resources. Among the eastern margin of the mean annual rainfall is 500 mm, while in the western most part it is 100 mm. The rainfall is monsoon driven. It comes between June and September (in 9-21 short spells). Large coefficient of variation (40-60%) and erratic distribution during the monsoon are characteristics features of the rainfall, leading often to prolong drought and failure of rainfed crops (More and Samadia, 2007). Temperature as low as 4.4° C, and as high as 50° C has been recorded in Western Rajasthan. Farming system and cropping system approach for sustainable use of farm resources and reduced risks have been successfully demonstrated in perennial horticulture. There is great pressure of livestock on available feed and fodder, as land available for fodder production has been decreasing. The requirement of dry and green fodder by 2025 would be 1170 mt and 650 mt while supply is expected around 411.3 mt and 488 mt deficit will be 64.87 % green fodder and 24.92 % dry fodder (Table 1).

Henna or Mehandi (Lawsonia inermis L.) a perennial shrub belongs to family Lythraceae. It is commonly cultivated as a commercial dye crop possess natural dyeing properties and are used for hair dyeing and for staining of palm, feet and other body parts since times immemorial. The plant finds their importance due to presence of orange red dye in its leaves and essential oil in its flower. Oil extracted from leaves and flower called ‘Otto of henna’ which is utilized as perfume (Jaimini et al., 2005). It can grow well in harsh climate of arid and semiarid regions. In India, over 90 percent of the henna production comes from Sojat region of Pali district of Rajasthan and Sojat is only center for its processing and trading in India. In India it occupies about 40,000 ha area out of which 35,000 ha alone is in Pali district (Sojat and adjoining tehsils).

Geographical distribution

It occurs naturally in North Africa mainly in countries of Algeria, Cyprus, Egypt, Eritrea, Ethiopia, Indonesia, Iraq, Iran, Jordan, Kenya, Kuwait, Lebanon, Libya, Malaysia, Morocco, Oman, Philippines, Qatar, Saudi Arabia, Syrian Arab Republic, Tanzania, Tunisia, Turkey, Sahara and Yemen. It is naturally occurring in many of these countries along the water courses and semi-arid regions where it can with stand dryness as well as drought. It has been introduced into countries like Australia, Benin, Burkina Faso, Cameroon, Central Africa, Chad, Congo, China, Gabon, Gambia, Ghana, Guinea, India, Liberia, Mali, Mauritania, Niger, Nigeria, Pakistan, Senegal, Sierra Leone, Spain, Sudan, Togo and Zanzibar (Suresh Kumar et al., 2005).

India is a huge importer of crude oil and spends about Rs. 1,200 billion of foreign exchange every year to meet 75% of its oil needs (Anand, 2006). This has affected its balance of payment adversely, especially after the unprecedented rise incrude oil prices. Being an agricultural country endowed with varied climates, nutrient-rich soil and ability to grow many different crops, India offers a great promise as a producer of surplus raw material for biodiesel and bioethanol production. India’s biofuel production currently accounts for only 1 percent of global production (Shinoj et al., 2012). Although all oils can be used, edible oils as a source for biodiesel production have to be ruled out because they are required for cooking and food purposes. Therefore, non-edible oils are the premier raw material for biodiesel production in India. Seeds rich in these oils are mostly produced by perennial species. Hence these trees are referred to as tree-borne oilseed species (TBOS) and they produce TBOs (Aurora and Kumar, 2015). TBOs are cultivated/grown in the country under different agro-climatic conditions in a scattered form in forest and non-forest areas as well as in waste land/deserts/hilly areas. The country has enormous potential of oilseeds of tree origin like mahua (Madhuca indica),neem (Azadirachta indica), simarouba (Simarouba glauca), karanja (Pongamia pinnata), ratanjyot (Jatropha curcas), jojoba (Simmondsia chinesis), cheura (Diploknema butyracea), kokum (Garcinia indica),wild apricot (Prunus armeniaca), wild walnut (Aleurites molucana), kusum (Schleichera oleosa), tung (Vernicia fordii), etc. The best characteristic is that it can be grown and established in the wasteland and have varied agro-climatic conditions. (Aurora and Kumar, 2015)

Biodiversity is a matter of concern to everyone as most of the economic sectors depends on it e.g. agriculture depends on it for wild genetic resources and biological control, human health depends on nature for many pharmaceuticals, industry requires raw materials which come from the nature, tourism increasingly base its attraction on natural amenities linked to biodiversity, water resources require intact vegetation to protect watershed and prevent siltation, disaster prevention needs natural vegetation to help people to respond to drought and the lists goes on and on (Mc Neely, 2004). Each of these sectors needs to be reminded of its reliance on biodiversity and provided with opportunity to invest in insuring the continued survival of the biological basis of their prosperity. Thus biodiversity has emerged as an integral aspect of human life and hence undoubtedly one of the keystone of sustainable development. Biodiversity in arid lands are under severe threats due to habitat destruction (Manuder and Clubbe, 2002), invasion of species (O’Kennen et al., 1999) dilution of customary conservation practices, climate change (Given, 1994; WCMC, 1992), increasing human population, unsustainable exploitation of natural resources, grazing pressure etc.

There has been an increasing demand for horticultural crops more particularly fruit .With this, the demand for good quality planting materials has gone up and hence the nursery business has developed rapidly in the recent years in our country. Plant propagation aims at the reproduction of selected individuals or group of individuals, in this the basic principal of life impose certain requirements which must be met with in practices for successful propagation. Plants material of various fruit crops have not only to be raised efficiently and scientifically, for which skilled knowledge in raising and management of nurseries is needed, but also these have to be transported quickly from nurseries to place where these plants materials will be grown.

Availability of quality planting material is one of the most importanant requirement for increasing the production and productivity of any fruit crops. It becomes one of the great challenges for horticulturists to get the disease free quality planting materials of fruit crops from an efficient and reliable nursery.

In the present scenario of rapidly increasing population and decreasing cultivable land, there is urgent need to increase the agricultural productivity. According to Indian Council of Agricultural Research (ICAR), 280 million tones food grain would be required to match the country’s demand by 2020. It will be a difficult task to meet this food requirement in near future from the present productivity levels. It is necessary to increase agricultural productivity, because about 60% of Indian agriculture is rainfed. Proper use of even a single drop of rain water is necessary to ensure the success of rainfed agriculture. In hills, agriculture is main source of livelihood of rural people. However, small and scattered land holding, difficult topography, womendependent agriculture, totally rainfed, typical socio-economic factors and migration of youth towards urban/plain areas are major constraints of hill horticulture.

In the high altitude areas, the river flow in deep valley at the toe of slopes rarely serve any purpose as far as domestic water supply and irrigation are concerned and hence, agriculture in these areas is mostly rainfed. However, these areas received high magnitude of rainfall but this rainwater is not possible to convert into soil moisture due to steep terrain of hills which provided minimum opportunity time for infiltration of rainwater. It has been estimated that only less than 15 per cent of the rainwater is able to percolate down through slopes and recharge the soil moisture. The rainfall pattern hill is erratic i.e. most of rain (approximately 70% of annual rain) received only during the two months of monsoon. Furthermore, the climate of high altitudes comprises several climatic anomalies such as wide variability in temperature (-3 ^oC to 35 ^oC), frequent snowfall, hail, sleet and erratic pattern of rainfall. Under such abrupt conditions crops grown in open conditions could not be sustained.

Importance of fruits in human diet is well recognized since time immemorial. They are important part of a healthy diet as natural sources of energy, essential vitamins, minerals and antioxidants ever since the beginning of humancivilization. Our country is bestowed with varied climatic conditions, which had made it possible to grow diverse group of fruits from its temperate to tropical, to subtropical and even to arid niches. The cultivation of fruit crops is, presently, one of the most important and profitable proposition. Growing fruit crops translate into realization of more yield/ income from a unit area of land than any of the agronomic crops. However, there is need to considerably increase the yield of fruit crops, particularly under changing environmental conditions as under such conditions diseases are getting more prevalent. Therefore by adoption of proper protection practices, yield of fruit crops can be improved.

Plant diseases caused by fungi, bacteria, viruses and phytoplasmas reduce crop yields (Khoury and Makkouk, 2010).Adoption and support for using participatory approaches help to farmers in disease management of fruit crops, reducing costs and improving production efficiency. Fungal, bacterial and viral diseases pose serious threat in the cultivation of fruit crops in India. To reduce the losses caused by plant disease, a complete knowledge of disease management strategies of fruit crops are essential which are as follows:

Heifers are future cows of the herd. Production and reproduction performance of cows depends on the care and management during calf and heifer stage. Rearing period of heifers can be divided into two stages, viz. from weaning to first service and service to calving.

Care of calf before birth

During the last 2-3 months of gestation the fetus grows rapidly. Calf draws a significant quantity of nutrients from the mothers system. It has to be replenished by additional feeding of the cow. A cow should be fed well-balanced ration for maintenance.

Organic certification is the procedure by which the accredited certification Body by way of a Scope Certificate assures that the production or processing system of the operator has been methodically assessed and conforms to the specified requirements as envisaged in the National Programme for Organic Production (NPOP).

The NPOP provides for Standards for organic production, systems, criteria and procedure for accreditation of Certification Bodies, the National (India Organic) Logo and the regulations governing its use. The standards and procedures have been formulated in harmony with other International Standards regulating import and export of organic products.

Introduction

The Intergovernmental Panel on Climate Change (IPCC) assessment reports (IPCC, 2007) suggests that consequently occurring climate extremes are likely to increase the frequency and intensity in the future. In the Indian context, events such as landfall of rare of rarest most intense pre-monsoon Tropical cyclone Fani (2019), back to back landfall of very intense tropical cyclones such as Phalini (2013) and Hudbud (2014), Cyclone Komen (2015), Extreme rainfall events of Kerala (2018 and 2019), Heavy rainfall events of over Northeastern states of India (2019), Cloud burst events of Uttarakhand (2013), Rainfall over Himachal Pradesh (2019), Mumbai Rain fall (2015) and extreme heat wave conditions of 1998, 2015 and many similar type of extreme events are not usual. However, at present there is no unanimity among scientists to exclusively and directly link such extreme weather events to climate change, however based on number of studies and observation data sets it is agreed that the impact of climate change is evident (beyond the natural variability) in many part of the globe including India. In 2019 monsoon season at least 1351 deaths happened to ?oods, heavy rainfall and landslides compared to 1550 for year 2018. In this manuscript, recent research findings related to extreme weather events in the context India are discussed in the following section-2, need for high resolution and long term data sets are emphasized in section-3, followed by recommendations as part of future preparedness, that will not only enable us to address these issues in a robust scientific manner but also provide us strong resilient society to face these extreme weather events in an optimized and effective manner to minimize the loss of lives, properties and socio-economic conditions of citizens.

Introduction

Climate change is one of the biggest environmental threats to food production, water availability, forest biodiversity and livelihoods. Warming of climate system of the earth is a unanimously accepted reality and probably one of the most prominent challenges for scientists, development workers, policy makers and other relevant stakeholders regarding development and sustainability in international and national arena during past several years. Intergovernmental panel on climate change (IPPC) has described climate change as any anthropogenic or naturally occurring alteration in the climate over time. It is widely believed that developing countries such as India will be impacted more severely than developed countries. Climate change is emerging as a big threat to sustainable development of agriculture including animal husbandry and to the livelihood of people. Extreme events such as cold waves, heat waves, ?oods and high intensity single day rainfall events are on increasing trend during the last decade (Dikshit and Birthal, 2010). It is probable that by 2030 the impacts of climate change will be noticeable, although not dramatic and will be largely manifested through changes in pasture growth and quality, and greater inter-annual variability in pasture production. Livestock contribute to climate change by emitting methane through enteric fermentation. But they are also affected by climate change it directly and indirectly, hence affecting their economic and social contributions. Various studies suggest that the changes in pasture growth, composition and production will be dependent on the actual combination of CO₂, temperature and rainfall conditions. Livestock productions under both intensive and extensive systems are subjected to so many stresses, where they undergo different types of physiological adjustments to cope up with stressful conditions. Productions are drastically reduced during stress and require managemental interventions both in terms of optimum nutrition and health care (Soren, 2013).

Introduction

Birds lack sweat glands; hence non-evaporative cooling mechanism (radiation, conduction and convection) is the major route of heat dissipation within thermoneutral range. Beyond this TNZ, majority of heat loss occurs as insensible heat loss i.e., Panting. Panting is one of the visible responses in poultry during exposure to heat stress associated with considerable energy expenditure. This specialized form of respiration dissipates heat by evaporative cooling at the surface of the mouth and respiratory passage. Panting increase, the loss of CO2 from the lungs, this leads to a reduction in the partial pressure of CO2 and also reduces bicarbonate levels in blood plasma. In turn, the lowered concentration of hydrogen ions leads to rise in plasma pH, a condition generally referred to alkalosis (Daghir, 2009). Birds also respond by reducing their feed intake and thus metabolizable energy (ME) intake to reduce thermo genesis as an adoptive mechanism. If panting fails to prevent their body temperatures from rising, the birds become listless, comatose and soon die due to respiratory, circulatory or electrolyte imbalances (Saif et al., 2003).

Introduction

The Intergovernmental Panel on Climate Change Fifth Assessment Report (IPCC, 2013) emphasized that warming of the climatic system is unequivocal and that anthropogenic warming will continue for centuries to come due to timescales associated with climate processes and feedbacks. While stresses caused by climate change are likely to negatively impact the agricultural and livestock sector and escalate existing small-scale farming challenges; agricultural and livestock productivity and sustainability have to improve to meet the needs of the growing human population (DEA, 2013; Zamykal and Everingham, 2009). Climate change is seen as a major threat to the survival of many species, ecosystems and the sustainability of poultry production systems in many parts of the world. Nevertheless, global demand for poultry products is expected to increase, as a result of the growing human population, and its growing af?uence. The extreme climatic conditions impose various stresses on poultry birds which adversely affect their growth, production and reproduction.

While climate change is a global phenomenon, its negative impacts are more severely felt by poor people in developing countries who rely mostly on the natural resource base for their livelihoods. Moreover, rural poor communities rely greatly for their survival on agriculture and poultry which belong to the most climate-sensitive economic sectors. Climate change is expected to intensify existing problems and create new combinations of risks and shift hazard zones. The incidences of draughts, snow-storms and blizzard like events have risen. The situation is made worst due to factors such as widespread poverty, inequitable land distribution, limited access to capital and technology inadequate infrastructure, long term weather forecasts and inadequate research and extension. Intensive poultry production has much less impact on global warming than organic or free-range production (Van der Sluis, 2007). Seo and Mendelsohn (2006) reported that small farms of poultry are better able to adapt to warming. However, organic egg production needs more energy than non-organic and increases most environmental burdens. The most disadvantageous, from environmental point of view, is litter-free breeding of birds which causes great amounts of liquid manure.

Introduction

There is an ongoing debate on global warming worldwide as it is seriously impacting climate change. The global temperature has been increased by 0.74±0.18°C during the last century and the climate model projections summarized in the Intergovernmental Panel on Climate Change (IPCC) report indicate that the global surface temperature will probably rise a further 1.1 to 6.4°C during the twenty-first century (IPCC, 2007). High ambient temperature is one of the most important stressors to poultry, which has a direct relationship on profitability of chicken meat and egg production. A seasonal problem in many parts of the world, high environmental temperature (35-43^oC in tropical countries) causes economic losses through reducing feed intake while decreasing nutrient utilization, live weight gain, egg production, egg quality and feed efficiency in poultry (Corzo et al., 2003; Panda et al., 2007a; 2008). The ideal temperature for broilers is 10-22^oC for optimum body weight and 15-27^oC for feed efficiency (NRC, 1994). Layers will produce egg constantly in the temperature range of 10-30^oC. Above 30^oC, performance in terms of growth and egg production declines.

Introduction

Statistics generally refers to information about an activity or a process that is expressed in quantitate as well as qualitative traits. The quantitative research process is well structured whereas the qualitative one is fairly unstructured. It depends upon how a piece of information have been collected and analyzed. A good researchers need to have both types of skill. This article highlights about the operational procedure, about methods, procedures and techniques that are used in analysis of climate related data.

Parameter vs Statistic

When a data is collected with survey of all the individuals (like in a census) and analysed for certain values, it is called a parameter. But when, we guess the same value with a random sample and interpret for whole population it is called a statistic. Environmental parameters are: mean, variance, correlation, regression, heritability, repeatability etc. Again, there are two types of variables: quantitative and qualitative. Quantitative variables can take any value in a specified range. So, they are of continuous type. But qualitative variables are very few types ( 2 ,3 or 4 types) and they are of discrete type. Body weight is an example of quantitative variable whereas, comb type is a qualitative variable.

The dynamic layer surrounding the earth above its surface containing various gases, moisture, aerosols, etc. is called atmosphere. Atmosphere can be defined as the gaseous envelope surrounding the earth. It is retained by earth’s gravity.

The atmosphere protects life on earth by absorbing ultraviolet solar radiation, warming the surface through heat retention and reducing temperature extremes between day and night. The common name given to the atmospheric gases used in breathing and photosynthesis is air. The atmosphere has a mass of about 5.15 × 10¹⁸ kg, three quarters of which is within about 11 km of the surface. The atmosphere becomes thinner and thinner with increasing altitude, with no definite boundary between the atmosphere and outer space. The imaginary ‘Karman line’ lies at an altitude of 100 km above the earth’s sea level, and commonly represents the boundary between the earth’s atmosphere and outer space. The study of earth’s atmosphere and its processes is called atmospheric science or ‘aerology’.

A big layer of air called the atmosphere surrounds the earth. The air within this layer moves from place to place when it warms up or cools down. This moving air is known as wind. In other words, air in motion is called wind. Winds move moisture and heat around the world and also produce much of our weather.

The strength of the wind can vary enormously. Sometimes air moves slowly and the wind is barely noticeable. When the weather is clear there may be a gentle breeze. When the wind is still very light, but it can be felt and there may be rustlings by leaves. At other times, the air can move very quickly and become a gale or hurricane, blowing down trees and damaging electric poles and buildings.

Winds are part of a global air circulation system that acts to balance temperature and pressure around the world. Different parts of the world receive different amounts of heat from the sun. This differential heating in turn results in differences in temperature and air pressure around the world, which drives the world’s winds.

As equatorial areas are heated most, the air above them warms and rises as it becomes lighter than the surrounding air, causing an area of low pressure. In cooler areas, the air sinks because it is heavier and results in an area of high pressure. Winds will blow as air is squashed out by the sinking cold air and drawn in under the rising warm air. Any difference in temperature like this will always cause a difference in air pressure, and therefore winds will blow. These movements result in a global wind pattern, with air moving between different areas around the world and also at different heights in the atmosphere. Colder air from the poles tends to sink and move towards the equator closer to the surface of the earth. In contrast, warm air from the equator rises and moves towards the poles high in the atmosphere because it is lighter.

8.1 INTRODUCTION

Orchard is a place or a piece of land where different kinds of fruit plants are planted in orderly manner and managed efficiently for production of successive yield to get assured economic return. An orchard being capital-intensive and long-term venture careful planning, layout, selection of site, preliminary operations etc. are to be done. It is easy to establish an orchard considering its features critically but difficult to manage afterwards. It needs high managerial skills and technically skilled manpower to carry out different orchard operations. Any lapses in management can lead to incur heavy loss.

18.1 INTRODUCTION

The decline in productivity of old and senile orchards existing in abundance has become a matter of serious concern for the orchardists, traders as well as scientists. In India 30-35% area under fruit crops is occupied by old, senile, and pest-and-disease- affected orchards. For overcoming the problem of unproductive and uneconomic orchards existing in abundance, large scale uprooting and replacement with new plantations will be a long term and expensive strategy. Thus, rejuvenation of old and senile orchards is a good alternative.

2.1 Introduction

The name thermodynamics stems from the Greek words therme (heat) and dynamis (power), which is most descriptive of the early efforts to convert heat into power. It may be defined as the science that deals with the relations among heat, work and properties of a system. Today, thermodynamics is broadly interpreted to include all aspects of energy and energy transformations, including power generation, refrigeration, and relationships among the properties of matter. It is viewed as the science of energy, and thermal engineering is concerned with making the best use of available energy resources.

Thermodynamics basically entails four laws or axioms known as Zeroth, First, Second and Third law of thermodynamics.

The zeroth law deals with thermal equilibrium and establishes a concept of temperature.

The first law pertains to the conservation of energy and introduces the concept of internal energy.

The second law indicates the limit of converting heat into work and introduces the concept of entropy.

The third law defines the absolute zero of entropy.

The concept of energy was introduced by Newton in the field of mechanics during generalizing the hypothesis of kinetic and potential energies. Energy may be defined as the capacity to do work and it is a scalar quantity. It cannot be seen or observed. Its presence can, however, be felt by the properties of the system. There occurs a change in one or more properties of the system in case of energy transfer. The absolute value of energy of a system is difficult to measure, whereas the energy change is rather easy to calculate. Energy follows the conservation law, one of the most fundamental laws of nature, which simply states that during an interaction, energy can change its form from one form to another but the total amount of energy remains constant, that is, energy cannot be created or destroyed only form can be changed.

14.1 Introduction

Hydro-electric power is electricity produced by the movement of fresh water from rivers and lakes. Gravity causes water to flow downwards and this downward motion of water contains kinetic energy, that can be converted into mechanical energy, and then from mechanical energy into electrical energy in hydro-electric power stations. (“Hydro” comes from the Greek word hydra, meaning water). At a good site hydro-electricity can generate very cost-effective electricity.

Abstract

Any country’s socio-economic development essentially depends on land and water resources. Resource depletion takes place when there is an overstretching due the exploding population, calling for prudent management of the resources. Application of remote sensing and Geographical Information System (GIS) tools in the management of natural resources at different levels including watersheds is quite well known. In addition, applied geoinformatics are also used in research on management of these delicate resources also besides characterization. There is a continuous advent in technology in both hardware and software necessitating updation of application scientist/manager. Once an exclusive tool of elite institutions and government agencies, GISnow became an indispensible part of our day-to-day life. As the urge for information intensifies, new applications of GIS continue to evolve. A concerted effort is needed to develop an information system when vast expanses of natural resources are to be managed and a combination of information tools like remote sensing, global positioning system and GIS always updates the database effectively. However, the cost factor should not hinder the applications at micro level. This necessity calls for attention to popularize free and open sources of software (FOSS) and data (particularly digital elevation models (DEM) and satellite imagery) to put the techniques into use by enthusiasts at village level such that a database at a regional level can be built through participatory GIS. It is in this direc tion the av ailab le li terat ure on appl ied geoinformatics coupled with use of FOSS is reviewed and presented in this article to give an idea as to how an open ended information system could be developed to help the management.

Keywords: Natural resources, management, Remote sensing, GIS, FOSS, DEM

Abstract

This study was conducted at Directorate of Cashew Research (DCR) Puttur, D.K., Karnataka during 2007-12. In this study, a methodology was standardized to find the area under cashew, barren areas and other areas for expanding cashew cultivation with remote sensing. It was found that the images pertaining to the month of November was best for classifying cashew since the colour of cashew leaves changes during that period. Also, the LISS III images were found to be good for identifying cashew. It was not possible to differentiate between cashew seedling area and cashew graft area using LISS III or LISS IV images. A spatial database of soil moisture was prepared for the irrigation scheduling in cashew and a spatial database of major nutrients was prepared for the site specific nutrient management in cashew gardens. A spatial database of land slope and stream orders was prepared using GIS and suitable soil and water conservation interventions were suggested for the selected area.

Keywords: Cashew, GIS, remote sensing

Abstract

The weather or climate is a natural resource and is an important basic input in agricultural planning and strategies. Every plant process, related with growth, development and yield of a crop and each of inseason and off-season farm operations (according to World Meteorological Organization) is more than 10 per cent and can reach up to 50 per cent in smaller areas and not a surprise even if it reaches to 100 per cent on micro scale. Amongst the various weather elements, temperatures, radiation and rainfall play major role in deciding the crop growth and yield levels. Precipitation is one of the important weather factors being responsible for atmospheric and soil moisture and therefore has more agricultural importance, especially in rainfed agriculture.

Keywords: Remote sensing, weather, agroadvisory, GIS

1.0 Introduction

India receives more than 70 per cent of its annual rainfall during South West monsoon season. Indian summer monsoon rainfall shows large intra - seasonal and intra-annual variability (Parthasarathy, 1960; Alexander et al., 1978; Mooley and Parthasarathy, 1984) and also changes in space and time, intensity and distribution. Borgaonkar and Pant (2001) have reported that Indian monsoon rainfall has shown trend less nature since 17^th century based on proxy data with large inter-annual fluctuations. IPCC (2001) has reported increase in rainfall over tropical and higher latitudes and decrease in rainfall over subtropics and mid latitudes.

Abstract

Natural resources and agricultural production processes vary spatially. Capturing the spatial variations in data and knowledge of natural resources and production processes has been a major challenge for efficient and sustainable management of agricultural production systems. Geographical Information Systems (GIS) provide an effective platform for storing and mapping spatial data and modeling the relevant processes. Huge volumes of geospatial data on specific themes such as soils, water, climate, and other natural resources, are being collected by public and private agencies. However, currently it is difficult for most users to access the data and integrate them into a GIS platform to derive useful information and knowledge for specific applications. There is a need to create geospatial data and knowledge systems that can provide efficient, on-demand and remote access of spatial data to users to enable development of a variety of GIS applications for agricultural and natural resources management. The design of a prototype geospatial library to provide web-based access to geospatial data, services, and learning and knowledge resources that can support agricultural and natural resources management is presented. The design is scalable and sufficiently general to allow a range of agricultural and natural resources management applications across different spatial scales.

Keywords: Agriculture, GIS, Geospatial library, Knowledge Management, Natural Resources