eChapters

Introduction

The food that we consume should not only contain all essential nutrients like carbohydrate, protein, fat, vitamins, minerals, fibre etc but also should be hygienic and safe. Safety and quality of food is to be ensured not only during food production but also should be continuously monitored till it reaches the consumer (Coles and Frewer, 2013). The characteristics of food are altered during every processing operations viz., cleaning, sorting, transportation, thermal processing, packaging, storage, distribution etc which may be desirable or undesirable. Persistent physical, chemical and microbiological analyses have to be done at all levels of supply chain to ensure the quality of food. Traditional methods of food safety analysis are spectrophotometry, aerobic plate count method, microscopic plate count, titrations, chromatography etc. Though these techniques provide accurate results, the analysis demand cumbersome extraction steps, trained technical staff and are time consuming (Di-Natale et al., 2000). Hence, steady, sensitive and rapid monitoring of food analysis technique is a need of the hour in the present era. Biosensors can effectively replace the conventional techniques owing to its reliability, rapidity, economic and field applicability (Prasad et al., 2014). Biosensors are an attractive diagnostic alternative owing to their in situ detection ability and comparatively reduced detection time from several days to hours, or even minutes (Ruiz et al., 2017). Rapid food analysis can also minimise spoilage, especially in freshly harvested agricultural commodities, such as fruits and vegetables, meat, fish etc. In addition, the portable detection devices provide in-situ detection capabilities without extensive training and assist in integrating real time analysis in food processing centres.

16.1 Introduction

Food safety is most important issue in today's global environment. To safeguard food supply is a very difficult and challenging responsibility, as a consequence of which the world's largest food companies, retailers, and manufacturers have placed very high food safety standards. Although the safety of food has improved exponentially but progress is uneven and food borne outbreaks due to microbial contamination, pesticides, antibiotics chemicals and toxins are common in many countries. International trade statistics (2007) by World Trade Organization (WTO) reported that Europe has accounted for 46% of world exports of agricultural products, where food represents 80% of agricultural exports. The trading of contaminated food among countries increases the risk for outbreaks and consequently, health risks due to microbial pathogens in food are of major concern to all governments.

Biosensors are an important option in the agricultural and food sectors to control production processes and ensure food quality and safety by dependable, fast and cost effective methods. Biosensors have plenty of advantages over conventional analytical tools since they offer advantages in size, cost, inherent specificity, selectivity, rapid response, accuracy and sensitivity. Food microbiologists are always in search of rapid and reliable automated systems for the detection of biological activity. Biosensors provide sensitive, miniaturized systems that can be used to detect unwanted microbial activity or the presence of a biologically active compound, such as glucose or a pesticide. Immunodiagnostics and enzyme biosensors are two of the leading technologies that have had the greatest impact on the food industry. The use of these two systems has reduced the time for detection of pathogens such as Salmonella to 24 hour and has provided detection of biological compounds such as cholesterol or chymotrypsin. The another useful application for biosensors, is detection of genetically modified organisms (GMO), since several countries have laws regulating the commercialization of GMO products and their derivatives. Biosensors are also useful in the implementation of hazard analysis and critical control points (HACCP) plans by verifying process developments and correcting errors in due time. There is joint application of Biosensor technologies and nanotechnologies in many food and agricultural applications such as the development of nano-scale tools for biosafety, nanoscale compounds for food packaging, and nano-sensors for pathogen detection in animals and plants. These are helpful tools in the detection and control of potential food contaminants by the agricultural and food industries.

Bioshields offer barriers of vegetation, shrubs, small and big trees and if integrated as a well designed system they can greatly help our coastal as well as inland areas. Though primarily looked at for coastal regions, under a broader definition Bioshields can play important role in semi-desert areas, hills, etc. also.
Why Bioshield ?
Bioshields or Biobarriers can make a major contribution in minimizing the effects of storms, cyclones and Tsunamis and at the same time offer short and long term ecological and livelihood benefits.
• Bio-Shields in coastal areas include raising mangroves, casurina, palms, bamboo & other tree species and halophytes like Salicornia, etc. followed by other regular plants for the land.
• They serve as speed-breakers under conditions of coastal storms, cyclones and tsunami.
• In addition, they serve as carbon sinks, since they help to enhance carbon sequestration and sustainable fisheries and agriculture.
• Integration of Bio-shield with livelihood options and eco-restoration by developing different site specific models is therefore very important.
For example- the case of two villages near Kalpakkam in Tamil Nadu is often taken. During the devastating Tsunami sometime back, the village with plantation- a natural bioshield was saved with hardly any loss of life as against a nearby village with no natural bioshield. Several such examples are available world over. This indicates that if we can have a good, scientifically designed bioshield, it can be of a great help. This concept is bound to get much greater emphasis when we consider the increasing effect and danger due to climate change in the coming years.

Bioshields offer barriers of vegetation, shrubs, small and big trees and if integrated as a well designed system they can greatly help our coastal as well as inland areas. Though primarily looked at for coastal regions, under a broader definition Bioshields can play important role in semi-desert areas, hills, etc. also.

Why Bioshield?

Bioshields or Biobarriers can make a major contribution in minimizing the effects of storms, cyclones and Tsunamis and at the same time offer short and long term ecological and livelihood benefits.

Abstract

Soil microorganisms play a major role in the biodissolution of nutrients bound in the soil silicate minerals. Plant nutrients like K, P, Ca, Mg, Fe, Zn, and Mn are bound in them. Silicon is considered as agronomically important as it confers rigidity and strength to crop plants and enhances yield. Biodissolution of these nutrients result in their availability to crops influencing the growth, biomass and yield. The microbial metabolites like organic acids, amino acids, inorganic acids, amines, ammonia, phenolic compounds, extracellular polysaccharides, siderophores, ligands of cations and cation exchange are involved in the biodissolution of K, Zn and Si. Frateuria aurantia, Bacillus mucilaginosus and B. edaphicus and Bacillus sp are recognized as potash mobilizers, silica and zinc solubilizers.

Abstract

Contamination of environment with heavy metals has become a serious global problem due to its threat to animal and human health. Removal of this non-biodegradable, hazardous heavy metals through bio-materials has received paramount interest and intense attention in the last few decades as bio-materials play crucial role in remediating heavy metal polluted environment through a process called “biosorption”. The term biosorption, therefore, has become a popular theme in recent years due to its relatively simple, inexpensive, eco-friendly with rapid mechanism of removing heavy metals from polluted environment. There have been burgeoning studies around the globe for alleviating the problem of heavy metal pollution by selecting and developing an effective bio-sorbent with minimum treatment process for field application. This review aims to provide vast information on types of biosorbent available, their exploitation for better efficiency and their economic attractiveness for the restoration of heavy metal polluted environment.

15.1 Introduction

Statistics is mostly used as a tool for assessing the capability of the system. Statistics refers to facts shown in numbers. Modern statistical methods and data are being found increasingly useful in research in different fields such as hydrology, biology, water quality and forestry etc. Statistics when used effectively becomes so intertwined in the whole fabric of the subjects to which it is applied. Statistics assists in planning the initial observations, organizing them and formulating hypothesis from them and in judging whether the new observations agree sufficiently well with the predictions from the hypothesis. In statistical methods, there is an operation of multiple causes and the investigator has only limited control over there. But statistical methods are found extremely useful in predicting the consequences of a situation. It requires skill for acquiring and handling data. There is a methodology to deal with the data and analysis of data is based on scientific and engineering strategies (Ramakrishnan, 1995).

In a huge rainfall data over a period of 300 years, it is not possible to observe all the items. Statistical methods are developed to estimate the error or deflection from the true or real value when we are taking inference from a sample for a hydrological data.

In the modern world where life sciences is getting more and more importance. To meet our environmental problems and energy requirements due to rapid industrialization and population growth, scop of life science has taken its new shape. Based on statistical analysis, new field like environmental sciences, hydrology, genetic engineering, biotechnology and biosociology have been evolved. Experiments about crop yields with different types of fertilizers and different types of soils or the growth of animal life and plant life under different environmental conditions and diets are very often designed and analyzed according to statistical method. Even in the field of medicine and public health, statistical methods are used for testing the efficacy of new medicine and method of treatments. As a matter of fact, for a research worker in any field, which is concern with numerical results, a study of statistical method is not only useful but also necessary. Hence it can be rightly by remarked “Science without statistics bears no fruit, statistics without science have no root”.

. Introduction

A primary issue for modern horticulture is facing two contradictory objectives, such as the need to produce food for the increasing world population and to minimize damage to the environment, which can in turn negatively impact horticulture. Fertilizer and chemical use and manufacture are hazardous to the environment and humans. As a result, new and effective environmentally friendly compounds are required. Plant biostimulants, which are harmless for humans and the environment, are one answer. They are particularly useful for lowering pesticides in agriculture. Plant biostimulants have become popular in farming and cultivation in recent years.

Agriculture worldwide is undergoing a profound shift toward sustainability, driven by the need for increased productivity and environmental stewardship. Among the many innovations shaping this transition, biostimulants have gained prominence as a vital tool for enhancing crop performance, improving soil health, and promoting sustainable farming. Unlike conventional agrochemicals, biostimulants work by activating natural plant processes, enhancing nutrient uptake, and increasing resilience to environmental stress. The global agrichemical industry now distinctly categorizes biopesticides, biofertilizers and biostimulants.
WHAT ARE BIOSTIMULANTS?
Biostimulants are natural synthetic substances that enhance plant growth and development without being fertilizer or pesticides. They work by improving nutrient uptake, increasing stress resistance, and stimulating beneficial microbial activity in the soil. Unlike chemical fertilizers, which directly supply nutrients, biostimulants enhance the plant’s ability to utilize nutrients more efficiently.
TYPES OF BIOSTIMULANTS
Biostimulants are categorized based on their composition and mode of action:
Humic and Fulvic Acids – Improve soil structure, enhance nutrient availability and increase root growth.
Seaweed Extracts – Rich in phytohormones and trace elements that promote plant growth and stress resistance.
Amino Acids – Play a crucial role in protein synthesis and help plants recover from environmental stress.
Microbial Biostimulants – Beneficial bacteria and fungi that enhance nutrient uptake and improve soil health.
Brassinoloilds & Tricontanols – Help in vegetative growth and fruit development.
Alkaloids – Improve plant defense mechanism.

Biostimulants examines substances and microorganisms that enhance plant physiological processes, growth, development, and tolerance to environmental stress. The chapter distinguishes non-microbial and microbial biostimulants and discusses plant extracts, protein hydrolysates, animal-derived hydrolysates, humic substances, seaweed and macroalgal extracts, and secondary metabolites. Microbial examples include nitrogen-fixing and nutrient-solubilizing organisms, arbuscular mycorrhizal fungi, Trichoderma, Bacillus, Pseudomonas, microalgae, and cyanobacteria. Their implications for germination, metabolism, root development, crop quality, growth promotion, and abiotic-stress tolerance are described. The chapter provides a framework for understanding biostimulants as complementary tools within sustainable crop production and natural farming systems. in modern sustainable crop production for farmers worldwide under diverse agricultural production conditions.

13.1 Introduction

A surfactant or surface-active agents are the compounds that lower the surface tension between the two liquids or between a liquid and a solid. Surfactants may act as detergents, wetting agents, emulsifiers, foaming agents and dispersants. Surfactants are normally organic compounds that are amphiphilic, meaning they contain both hydrophobic groups or hydrophilic groups. Therefore a surfactant contains both a water insoluble component and a water soluble component. Surfactant will diffuse in water and adsorb at interfaces.

The interfacial free energy is the minimum amount of work required to create that interface and the interfacial tension between two phases is determined as the interfacial free energy per unit area. The interfacial (or surface) tension is also a measure of the variance in nature of the two phases meeting at the interface (or surface). The greater the dissimilarity in their natures, the greater the interfacial (or surface) tension between them. A surfactant is therefore a substance that changes the amount of work required to expand those interfaces. Surfactants usually act to reduce interfacial free energy.

Surface active agents in the form of emulsifiers have a long history of use and are widely used in many products being used in everyday life. An extensive basic research is required to understand the reason of instability and methods to prevent the breakdown of emulsions. Emulsifiers can function as dough conditioners by improving tolerance to variations in flour quality, better gas retention resulting in lesser yeast requirements, increased uniformity in cell size, a finer grain, more resilient texture and improved slicing. Also, the characteristics of freshly baked bread like soft crumb can be retained longer, if the appropriate emulsifiers are added. Commonly used surface active agents in bread production are propylene glycol mono- and diesters, polyoxyethylene sorbitan monostearate, ethoxylated mono- and diglycerides, succinylated monoglycerides and Diacetyl tartaric acid, esters of monoglycerides. Cookie characteristics like top grain, volume and spread ratio can also be improved. Here surfactants used are sodium stearoyl fumarate, sucrose fatty acid esters, sodium stearoyl lactylate, sorbitan fatty acid esters, polysorbates and ethoxylated monoglycerides. In dairy products like Ice cream surface active agents play some important functions like to improve fat dispersion and control fat agglomeration, facilitation of fat– protein interactions, facilitate air incorporation, give smoother texture due to smaller ice crystals and air cells, increase resistance to shrinkage, improve melt-down and reduce whipping time. In candy products, the elimination of “bloom,’’ i.e., the transition of fat crystals is a key reason for the addition of surface active agents. In mixtures of triglycerides, surfactants like sorbitan esters (Spans) and ethoxylated sorbitan esters (Tweens) can control product viscosity in chocolates and in cream fillings and modify the crystal structure. Surface active agents have been utilized in the production of meat analog products also. In margarine, Emulsifiers fulfil several functions like modification of crystal structure in the vegetable fat, assistance in emulsion formation and antispattering. Here, a mixture of citric acid monoglycerides and monoglycerides or lecithin can be used. The properties and mode of action of these chemical surfactants is discussed in the following sections.

ABSTRACT

The use of engineered nano-materials has been increased as a result of their positive impact on many sectors of the economy including agriculture. Silver nanoparticles (AgNPs) are now used to enhance seed germination, plant growth and as anti-microbial agents to control plant diseases. This study investigated the synthesis of silver nanoparticles using the aqueous solution of three medicinally important plants (such as Spondius mombin L., Stachytarpheta jamaicensis (L.) Vahl and Syzygium samarangense (Blume) Merr & Perry leaf extract in room temperature (350C). AgNPs present in the leaf confirmed by colour change, UV-VIS spectrum analysis, average size of AgNPs confirmed by PAS. FTIR measurement were carried out to identify the other possible biomolecule groups such as alkenes, esters, phenols, alcohols and aromatic. Leaf extract AgNPs were shown significantly higher antimicrobial activities against four species of bacteria. This findings suggest that the seed germination percentage, relative seed germination rate, relative shoot and root growth and germination index of the tested plant depends upon concentrate gradient of AgNPs.

ABSTRACT

Recognizing the need to apply plant tissue culture tools for generating planting materials of important spice crops especially vanilla, the Spices Board started Biotech Production Unit at its head quarters building at Kochi with an annual production potential of 8 lakhs plantlets. Complete tissue culture protocols were developed and scaled up for large scale production of vanilla and other spices viz. large cardamom, small cardamom and tree spices. The laboratory is equipped with all modern facilities and is established in an area of about 2000 sft. Department of Biotechnology, Govt. of India also participated in the venture by sanctioning a project entitled “Regional centre for large scale production of tissue culture plantlets of vanilla and other spices” with a financial out lay of Rs 95 lakhs equally shared by DBT, New Delhi and Spices Board, Cochin.

At present there is a stock of over 3.00 lakh vanilla cultures in the lab and already 1.25 lakh plant lets were sent for hardening. The Spices Board, in coll aboration with “Kudumbashree”, a poverty eradication mission of Govt. of Kerala, extend short term training in tissue culture techniques to undergraduates from ‘Below Poverty Line’ (BPL) families and engage them as long term trainees in the Biotech Production Unit. The Board also coordinates and extends support to Kudumbashree members for, establishing and maintaining hardening facilities for TC plantlets thus providing means for empowering women from BPL families.

Tissue culture consists of growing plants cells as relatively on organized masses of cells on an agar medium (callus culture) or as a suspension of free cells and small cell masses in a liquid medium (suspension culture). In other words, In plant cell culture, plant tissues and organs are developed in vitro on artificial media, under aseptic and controlled environment. The procedure depends mainly on the concept of totipotentiality of plant cells (Haberlandt, 1902) which refers to the ability of a single cell to express the full genome by cell division.

A. Tissue culture and micro propagation
Tissue culture and micro propagation are essential techniques for the propagation of various spices and medicinal plants, allowing the rapid production of diseasefree and genetically identical plants. The overview of techniques apply are as follows:
1. Black Pepper (Piper nigrum)
1a. Tissue culture in Black Pepper
Callus induction from leaf and stem explants, followed by somatic embryogenesis. The protocol for black pepper (Piper nigrum L.) tissue culture involves several stages, including callus induction, shoot regeneration, root initiation, hardening, and implementation of tissue culture techniques. The general outline of the process based on recent advancements are as follows.
a. Callus induction
• Explants: Typically, leaves, stems, or nodes are used as explants.
• Medium: Murashige and Skoog (MS) medium supplemented with auxins like 2,4-Dichlorophenoxyacetic acid (2,4-D) @ 0.5-2.0mg/l or Naphthalene acetic acid (NAA)@ 0.5-1.0mg/l is commonly used to induce callus
formation.
• Conditions: Cultures are usually maintained in dark conditions at 25°C to 28°C to promote callus induction.

The Convention on Biotechnology has defined biotechnology as “any technological application that uses biological systems, living organisms or derivatives thereof, to make or modify products or process for specific use”. The global food requirement is increasing with growing population, so the productivity gap could be filled by improving genetic health. Animal breeding focuses on genetic improvement through biotechnological and genomic approaches. Genetic progress is influenced by the type of biotechnology such as selection accuracy, genetic interval, intensity of selection, genetic variance. It helps to improve animal production, treatment of genetic disorders, production of transgenic animals resistant to diseases, vaccine production and also to maintain genetic diversity for endangered species. Genomic selection is a type of marker assisted selection. It improves the genetic gain by decreasing genetic interval and improving reliability. These novel approaches have high potential in animal breeding, if executed judiciously may provide practical benefits to mankind. The magnitude of genetic improvement of livestock species

Summary

Stem cells are undifferentiated cells which have the potential to divide and multiply indefinitely and can be differentiated to any type of cell of the body of an organism. Due to its peculiar characteristics stem cells are being experimentally used to cure certain dreaded diseases of the humans including different haemoglobinopathies. The stem cells isolated from bone marrow have been cultured, modified and differentiated to get various blood cells like erythrocytes, leukocytes, and thrombocytes etc. Recently haematopoietic stem cells have been transplanted to the sickle cell and beta thalassaemia patients successfully. Gene therapy using the embryonic and cord blood stem cells have been experimentally tried successfully to cure transgenic sickle as well as thalassaemic mice. Induced Pluripotent stem cells (iPS) generated from autologous skin has also been used successfully for treatment of transgenic sickle cell anaemia mouse.

Abstract

Anaerobic microorganisms occur in oxygen-free environments as they possess biomolecules and metabolic processes that have adapted to sustain them in the stressed environments. These biomolecules and metabolic processes are harnessed and employed in various biotechnological applications. Anaerobes are abundant in various ecological niches such as freshwater or marine sediments, subsurface aquifers, deep thermal vents etc. where, in the absence or limitation of oxygen, they utilise reduced ions such as nitrate, sulphate, ferric, carbonate and certain organic compounds like degrading organic matter, fatty acids or alcohols as electron acceptors during respiration/fermentation to produce more or fewer reduced products such as, alcohols, ammonia, organic acids, hydrogen and carbon dioxide as the oxidised product. Diversity of substrates that can be fermented and the wide range of products that can be formed make anaerobic processes useful in biotechnological applications. Their substrate versatility and flexibility, for example, they can utilize simple sugars as well as many of them can utilise complex renewable biomass make their biotechnological applications sustainable and environment friendly. Anaerobes have been employed in food, chemical and material industries for the production of food items, preservative, additives, chemical intermediates, solvents, catalysts and polymers. They find widespread usage in energy sector for generation of various kinds of biofuels that can mitigate our reliance on non-renewable sources for fuel production. An emerging aspect of anaerobic biotechnology is waste valorization that involves treatment of any kind of waste (industrial, municipal, agricultural, pharmaceutical), where organic fraction of the waste is converted into valuable products. Anaerobes play key role in maintaining the global cycles of carbon, nitrogen, and sulfur, and also facilitate bioremediation by breakdown of persistent compounds. Lately, role of anaerobes in medicine and health care sector is widely explored as they are found to produce several bacteriocins, antibiotics, immunomodulators, vitamins and anti-tumor compounds. Some of the anaerobes have also been employed as probiotics. In the present chapter, we discussed these and many more biotechnological applications of anaerobes in white, green, red and blue biotechnology.

Abstract
Transgenic organisms are defined as being introduced artificially with a transgene and incorporated stably into their genomes. There are various aquatic organisms in which the trans-genesis process has been applied like fish, crustaceans, molluscs, etc. Presently scientists can transfer a particular gene for a desirable and beneficial trait from one organism to another with more precision and in less time than traditional breeding. To date, over thirty-five species have been genetically engineered in laboratories. The transgenic fish are efficient feed converters. Salmon is the first transgenic fish that was used as food. Various techniques are involved in aquatransgenesis. They include – microinjection, electroporation, particle gun bombardment, liposome-mediated gene transfer and so on (setac. onlinelibrary.wiley.com). Through all these techniques a fish is genetically transformed so that it has desirable and beneficial trait. Numerous significant biotechnological uses for fish transgenesis are anticipated to be beneficial across a wide range of industries. The majority of genetically engineered fish serve purposes in fundamental studies of genetics and development. Various research teams have been creating genetically modified zebrafis to identify aquatic pollution. The lab that created GloFish initially aimed for them to alter their colour in response to pollutants, acting as environmental indicators. Transgenic fish have an improved growth rate than their nontransgenic counterparts. Moreover, they are disease-resistant and can be used as models for performing various scientific experiments in the field of environmental toxicology and biotechnology. All these beneficial traits are making transgenic fish more valuable in the biotechnological field. To fully realize the potential of transgenic fish technology in aquaculture, certain ethical and ecological issues must be scientifically resolved.
Keywords: Aqua-transgenesis, Genetically modified organisms, Microinjection, Biotechnological potential