eChapters

Ornamentals are beautiful plants used in home and urban landscaping to enhance quality of our lives. Ornamental crops are widely cultivated worldwide and appreciated for their characteristics and unique appreciable qualities such as attractive color, impressive shape and size of flower and for fragrance of flowers and foliage. Earlier ornamental plants were largely associated with our social life. Of late trends has changed towards commercialization and now they are used for decoration, personal adornment and value added products viz. dry flowers, extraction of essential oils, perfumes and dyes and in landscaping. Further, it helps in creating more job opportunities for youth and women.

The growing demands for quality flowers, introduction of new ornamental plants and diversification needs more attention in ornamental floriculture industry. Novelty is the key to success in ornamental horticulture. Introduction of exotic ornamentals and the domestication and release of new genotypes of wild ornamentals is always welcome in this connection. Some exotic ornamentals hitherto not widely grown in Indian gardens as well as a few native ornamentals with capability to bring in a color revolution and having the potential for exploitation are discussed below.

An index number is a statistical measure designed to show changes in a variable or group of related variables with respect to time, geographical location or other characteristics like: income, profession, etc. A collection of index numbers for different years, months, locations, etc. is called an index series. Since index number are usually used to measure the level of business and economic activities over a period of time, so they are rightly called barometers of economic activities or simple called economic barometers. The various problems faced in the construction of an index number are to known the specific purpose of index number, selection of items, data for index numbers, choice of base periods, choice of an average, selection of weights and choice of a suitable formula.

Methods of Constructing Index Numbers

A number of formulae have been developed for constructing index numbers, which may be grouped into the following categories:

• Unweighted index numbers

• Weighted index numbers

• Unweighted index numbers: In this case, weights are not expressly assigned. 

Bipolar plates (BPPs) are essential components of proton exchange membrane fuel cells, performing functions related to gas distribution, current collection, thermal management, water management, and cell separation. This chapter examines conventional and advanced materials used for BPPs, with particular emphasis on nanoparticle-enhanced composite systems. The incorporation of nanoparticles can improve electrical and thermal conductivity while reducing weight and supporting environmental sustainability. Materials, synthesis and fabrication techniques, and additive manufacturing approaches are discussed. The chapter also considers cost and scalability because these factors influence the wider commercialization of fuel-cell technologies. Nanoparticle-reinforced composites are presented as promising lightweight alternatives for sustainable energy applications.

Crops and trees can be protected from disease by applying pesticides at precisely scheduled intervals. It may only take a few grammes of the chemical to facilitate its distribution over the aerial parts of the plant, or to treat seeds or other propagating organs (tubers, bulbs, corns, etc.) or the soil in which plants will grow. Any chemical can be used in one of four different physical states: gas, solid, liquid, or solution. As a result, it is critical to employ the most efficient equipment to ensure a uniform deposit of the chemical on the target substrate with minimal material waste in the shortest amount of time and with the least amount of manpower.

2.1. Classification of Fish

Fish are incredibly diverse aquatic vertebrates. There are over 32,000 de scribed species of bony fish, over 1,100 species of cartilaginous fish, and over 100 hagfish and lampreys. Fish can be broadly classified into three groups:

2.1.1. Superclass Agnatha (Jawless fish): These are the most primitive fish, lacking jaws and paired fins. They have existed for over 500 million years. Examples include lampreys and hagfish.

2.1.2. Class Chondrichthyes (Cartilaginous fish): These fish have skeletons made of cartilage instead of bone. They have jaws and paired fins. Examples include sharks, skates, and rays.

2.1.3. Superclass Osteichthyes (Bony fish): This is the largest and most diverse group of fish. They have skeletons made of bone and have jaws and paired fins. Examples include tuna, salmon, goldfish, and many more.

Citrus is a major fruit crop grown all over the tropical and subtropical region of the world. Maximum citrus species are native of tropical and subtropical regions of South East Asia specially India, China in the area between these two countries. It is mainly cultivated in China, Brazil, India, USA, Mexico, Spain and Egypt in the world. China is the leading producer country in the world followed by Brazil, India and USA. India is the third largest citrus producer which has 4.8 per cent of the world’s total citrus production.

The words ‘system’, ‘sub-system’ and ‘practice’ are commonly used in agroforestry literature. In a broad sense, a system is defined as a group of associated elements forming a unified whole and working together in a well defined regular relation for a common goal. An agroforestry system refers to a type of agroforestry land-use that extends over a locality to the extent of forming a land utilization type of the locality. Sub-system and practice are lower-order terms in the hierarchy with lesser magnitudes of role, content and complexity. However, these terms are used loosely, and almost synonymously.

Classification of agroforestry systems is necessary in order to understand and provide a practical framework for evaluating systems and developing action plans for their improvement. Any classification scheme should satisfy the following criteria (Nair, 2008).

Executive summary

The ITK system had been developed by the indigenous communities based on their experiences, continuous improvement through informal experimentation and transfer of such knowledge to next generations. The tried and tested rich ITK pertaining to agriculture, livestock and other allied sectors had been interwoven with the socio-cultural and traditional practices followed by them. Since time immemorial indigenous communities had been applying ITK in animal husbandry to increase milk production, fertility, retention of placenta, breeding, prolapsed, care for the young stock and preparation of indigenous livestock products. ITKs are often adapted according to the local culture and traditions, needs, and environment; they are very dynamic and continuously changing, and lay emphasis on minimizing the risks rather than maximizing profits. Indigenous knowledge of livestock rearing is often “tacit” and not necessarily expressed in the conventional form of scientific documentation. The origin and evolution of indigenous technical knowledge (ITK) in India has been reported since time immemorial. Since then, the knowledge, belief, skills and practices pertaining to diagnosis, treatment and management of animal and human diseases are imprinted and carried to future generations. In the light of evolution, the practice has come to limelight as an alternative low cost solution to conventional western medicine and readily practiced by ordinary farmers. 

Introduction Millets are a group of annual grasses which are small seeded, hardy, drought tolerant, low maintenance and mainly found in semi-arid regions. The historic importance of millets can be derived from various types of traditional dishes which uses millets like roti and chapati flatbreads in India, uji (a type of porridge), injera (a fermented flatbread commonly eaten in Ethiopia) and beer in Africa, and kasha and fermented drinks in Eastern Europe. Millets are the 6th most important cereal grain in the world. India, China and Nigeria are the largest producers of millets, and the Research Institute for the Semi-Arid Tropics estimates that in Africa and Asia more than 90 million people depend on millets in their diets. There are hundreds of millet types, but the major types grown commercially are: proso millet, foxtail millet, pearl millet, Japanese barnyard millet and browntop millet. In this book chapter, we will mainly focus on two minor millets i.e., Teff and Fonio

Introduction

Nitrogen (N) fertilization assured centre stage for enhancing food production in developing countries especially after the introduction of high yielding and fertilizer responsive crop varieties. Almost half of the human population relies on N fertilizer for food production (Ladha et al., 2005), and about 56 percent of the N fertilizer is used for producing rice, maize, and wheat (IFA, 2002). It has contributed an estimated 40% to the increase in per capita food production over the past 50 years (Smil, 2002). However, excess use of chemical N fertilizer may negatively affect surface water, as well as groundwater, and the atmosphere (through leaching and runoff) through volatilization of N (Galloway et al., 2008).

Appendix-'F'    :    Chemical and Industrial Disaster Mitigation
    
Appendix-'G'    :    Emergency Procedure for Handling Chemical Disasters
    
Case Study    :    Bhopal Gas Tragedy 1984

Abstract

The present study deals with the slope instability analysis of a vulnerable stretch of 16 km between Pratapgarh road intersection and Mahabaleshwar town, which is a part of the state highway-72, Satara district, Maharashtra, India. The highway remains closed during the monsoon seasons, due to the recurrent instances of cut slope failures. So the present research work was conducted with an aim to study the reasons, extent and mechanism of the cut slope failures along the road sections as well as optimization of tools for the assessment of road cut stability of the area. The 16 km stretch was divided into seven vulnerable sections (M1; near Mahabaleshwar - M7; near Poladpur) based on the geological, geometrical and structural attributes. The slope forming mass primarily consists of laterite, weathered basalt and fresh jointed basalt, which are interbedded with red bole at some sections. Limit equilibrium, finite difference and finite element simulation were performed for seven cut slope sections, using similar geometries and material strength attributes for all the analyzing techniques. The assessment was carried out for both dry and saturated conditions to emulate the monsoons. The factor of safety yielded through the limit equilibrium method was the most conservative of all the tools; while the finite element method gave the least conservative figures in terms of factors of safety, being close to the field observations, the safety factor results of finite difference methods were between the limit equilibrium and finite element methods. The cut slope sections composed of weathered basalts and laterites (M1, M2, M3, M6) were found most vulnerable to failure during rains, while the sections composed of fresh jointed basalts (M4 & M5), though overall stable, are susceptible to planar and wedge failures.

Sweet potato, Ipomoea batatas (Linn.) originated in northwestern South America around 8000 - 6000 BC. The plant is a dicotyledonous, herbaceous, trailing vine which is the only economically important member of the family Convolvulaceae. The plant is generally characterised by starchy, succulent and tuberous storage roots; alternating palmately lobed leaves and medium sized sympetalous flowers which grow individually and vary in colour from white to varying degrees of purple (Austin et al., 1991).

Research setting refers to the detail information of an area where the study has been conducted. The study area, generally comprises of a particular geographical area viz. a state, district, block, or gram panchayat area selected according to the convenience of the investigator who possesses adequate knowledge regarding the location, communication facility etc. of the locality so that he/she can easily approach each and every corner of the area for data collection. Here. in this study the data collection was done mostly over telephone based on the interview schedule due to Covid-19 pandemic situation. Besides the investigators must also have the basic knowledge about the socio demographic background of the people so as to have an easy understanding of their knowledge, attitude and behavior. 

1. A plant cell constitutes the_____________ per cent of water. (80-90%)
2. Photosynthesis is the process of conversion of_____________ energy into _____________ energy. (Radiant, Chemical)
3. Dark reaction of photosynthesis occurs in_____________ and light reaction occurs in _____________ region of chloroplast. (Matrix, Lamellae)
4. The connecting link between glycolysis and Kreb’s cycle is_____________. (Pyruvic acid)
5. _____________ is responsible for turgidity of plant cells. (Osmosis)
6. A diffusion of liquids through a semi-permeable membrane is known as_____________. (Osmosis)
7. The diffusion of solvent particles into a living cell is known as_____________. (Endo-osmosis)
8. The diffusion of solvent particles out of a living cell is known as_____________. (Exo-osmosis)
9. The outward pressure exerted by the cell solution on the cell wall which is developed due to osmotic diffusion of water is called as_____________. (Turgor pressure)

Sweet potato, Ipomoea batatas (Linn.) originated in northwestern South America around 8000 - 6000 BC. The plant is a dicotyledonous, herbaceous, trailing vine which is the only economically important member of the family Convolvulaceae. The plant is generally characterised by starchy, succulent and tuberous storage roots; alternating palmately lobed leaves and medium sized sympetalous flowers which grow individually and vary in colour from white to varying degrees of purple (Austin et al., 1991). It is a perennial plant but is grown as an annual by vegetative propagation usually through vine cuttings and sometimes using either storage roots. Its growth habit is predominantly prostrate with a vine system that rapidly expands horizontally on the ground. The types of growth habit of sweet potatoes are erect, semi-erect, spreading and very spreading.

Requirements: Agriculturally important insects of each order

 Orthoptera

 Examples: Grasshopper, cricket, etc.

Metamorphosis: Paurometabolous

Mouthparts: Chewing

 Significance: Variable or Pest

 Characteristics

 •            They are medium to large-sized insects.

 •            Antenna is filiform.

 •            Mouthparts are mandibulate.

 •            Prothorax is large. The pronotum is curved, ventrally covering the pleural region.

•             Hindlegs are saltatorial

 •            Forewings are leathery, thickened and known as tegmina.

 •            They are capable of bending without breaking.

 •            Hindwings are membranous with large anal area.

 •            They are folded by longitudinal pleats between veins and kept beneath the tegmina.

Introduction

India has a long tradition of agroforestry which is widely practiced in all ecological and geographical regions of the country. Traditional agroforestry systems are broadly based on indigenous knowledge and the species are selected as a part of the cultural patterns of the community. The farmers and land owners in different parts of the country integrate a variety of woody perennials in the crop and livestock production systems depending upon the agro-climatic conditions and local requirements.

Development of Agriculture in the World and in India

Agricultural ecosystems will increasingly be called on to deliver food and fiber for a demanding and expanding global population. Until recently, increased production relied on expansion of the amount of land under cultivation and irrigation. Since World War II, production advances have relied on genetics and plant breeding, advances in fertilizer and pesticide use and improved cultural management (Matson et al., 1997). Since 1950, agriculture worldwide has expanded cereal production by an average of 2% per annum while population has increased by 1.9% per year (Borlaug and Dowswell, 1994).

Modern science-based agriculture had its beginnings in the late 19^th century with improved traction and tillage equipments. However, it was not until after World War II that the research findings that led to the modern-day productive systems in the United States and later in European and other developed countries. The expansion was directly related to the great demand for food to support the Allied war effort. Knowledge bases developed in plant genetics, physiology and pathology, along with a ten-fold increase in fertilizer use, advances in seed technology, weed control, irrigation and cultural methods allowed the development of the systems that dominate agriculture in many of the countries today. Corn or maize responded dramatically to the advances in production technology. Maize yield in the United States has increased more than 300 per cent over the past 50 years and continues to rise. Maize production technology has been delivered worldwide (Borlaug and Dowswell, 1994).

“Sustainable Water Resources Management Strategies” embarks on a comprehensive exploration of the paramount challenges and essential solutions for safeguarding our planet’s most precious resource: water. This recognizes that water is not merely a commodity but the very lifeblood of ecosystems, a cornerstone of human health, a critical input for food production, and an indispensable element for industrial progress and societal well-being. Building upon a fundamental understanding of the intricate hydrological cycle, the distribution of global water resources, and the escalating anthropogenic pressures they face, we now turn our attention to the proactive and forwardthinking approaches that define sustainable water resources management. • In an era marked by increasing environmental consciousness and the stark realities of climate change, the traditional paradigms of water management are proving inadequate. Growing populations, rapid urbanization, and the expansion of industrial activities place unprecedented demands on both the quantity and quality of available water. Furthermore, the erratic and often extreme