eChapters

1.1. Dry farming (Dryland farming)

Cultivation of crops in a region where the annual rainfall is more than 750 mm.

Semi arid crops with growing period of 75-120 days.

Crop failure is less frequent.

Moisture conservation practices are necessary.

Major 2 types of erosion (i) soil erosion and (ii) wind erosion

2.1. Soil erosion

Detachment of soil particles from the surface • Transportation by water, wind, ice or gravity.

3.1. Conventional farming

Refers to the use of synthetic chemical fertilizers, pesticides, herbicides and other continual inputs, genetically modified organisms, heavy irrigation, intensive tillage and concentrated monoculture production.

Highly resource and energy intensive, but also highly productive.

Conventional farming typically involves monocropping, but very expensive.

1.1. Watershed development

Refers to the conservation, regeneration and judicious utilization of all the resources viz., land, water, vegetation, animal and human within a particular watershed in integrated manner.

Water drainage area on earth’s surface from which runoff, due to precipitation, flows into a single to a larger stream, a river, a lake or the ocean.

1.2. Concept of watershed management

Planning and design of soil and water conservation structures such as bunds, waterways, overflow structures, water harvesting structure.

2.1. Definition

Land which is presently lying unused or which is not being used to its optimum potential due to some constraints

3.1. Land use classification

3.1.1. Classes

Capability class is the broadest category in the land capability classification system.

Class codes 1, 2, 3, 4, 5, 6, 7, and 8 are used to represent both irrigated and non-irrigated land capability classes.

Class 1: Soils have slight limitations that restrict their use.

Class 2: Soils have moderate limitations that reduce the choice of plants or require moderate conservation practices.

Class 3: Soils have severe limitations that reduce the choice of plants or require special conservation practices or both.

4.1. Highlights of the report on number and area of operational holdings (2015-16)

Total number of operational holdings in the country has increased from 138 million ha in 2010-11 to 146 million ha 2015-16 i.e. an increase of 5.33%.

Number of operational holders in different states

Uttar Pradesh (23.82 million ha)

Bihar (16.41 million ha)

Maharashtra (14.71 million ha)

Madhya Pradesh (10.00 million ha)

Karnataka (8.68 million ha)

5.1. Types of farming

Arable: Crops.

Pastoral: Animals.

Mixed: Crops and animals.

Subsistence: Grown just for the farmer and his family

Commercial: Grown to sell.

Intensive: High inputs of labour or capital usually small.

Extensive: Low inputs of labour or capital.

Sedentary: Permanently in one place.

Nomadic: The farmers move around to find new areas to farm.

1.1. Status of irrigation in Tamil Nadu

Geographical area of 13 million hectares is ranked eleventh in size among the Indian states.

Net area sown is about 6 million hectares.

3 million hectares or 50% get irrigation facilities.

To achieve maximum possible irrigation efficiencies, there are two approaches.

Modernization of conveyance system down below the reservoirs upto government controlled outlet. Involves mainly the construction and maintenance of head sluices, main canals, branch canals, and distributaries (Modernization of supplier’s side or system level development works)

Modernization below the government controlled outlets upto the drains (Modernization of user’s side or farm level development works). Also known as On-Farm Development Works (OFD).

3.1. Ground water development

3.1.1. Rain water harvesting

Collecting and using precipitation water from a catchments surface.

Extensive rain water harvesting apparatus existed 4000 years ago in the Palestine and Greece.

In ancient Rome, residences were built with individual cisterns and paved courtyards to capture rain water to augment water from city’s aqueducts.

As early as the third millennium BC, farming communities in Baluchistan and Kutch impounded rain water and used it for irrigation dams.

4.1. Water Use Efficiency (WUE)

An efficient irrigation system implies effective transfer of water from the source to the field with minimum possible loss.

To identify the nature of water loss and to decide the type of improvements in the system.

Evaluation of performance in terms of efficiency is prerequisite for proper use of irrigation water.

Term moisture stress is generally applied to the stomata opening and transpiration increases with time until they close due to high temperature.

5.1. Causes of moisture stress in plants

Main reason is extent of transpiration which is affected by leaf size and composition, size and distribution of stomata on leaf, atmospheric humidity, temperature, wind velocity and day length.

High atmospheric temperature due to intense sun and increased transpiration causes closure of stomata and wilting of leaves even, if soil moisture content is not limiting.

This deficit is made up during night due to decreased transpiration.

In plants, moisture content decreases either due to increased transpiration or reduction in absorption or both.

6.1. Quality of irrigation water

Asia per capita water availability has fallen by around 80 per cent during last five decades.

Suitability of waters for a specific purpose depends on the types and amounts of dissolved salts.

Some of the dissolved ions such as NO₃ are useful for crops.

1.1. Cropping pattern

Yearly sequence and spatial arrangement of crops or crops and fallow on a given area.

1.2. Cropping seasons in India

1.2.1. Kharif season: Southwest monsoon

Crops - Rice, cotton, jute, jowar (sorghum), bajra (pearl millet) and redgram (Pigeon pea).

Word manure derived from French word ‘Manoeuvrer, means to manipulate, to work, to produce crop.

2.1. Sources of organic wastes

Cattle shed wastes-dung, urine and slurry from biogas plants.

Human habitation wastes-night soil, human urine, town refuse, sewage, sludge and sullage.

Poultry litter, droppings of sheep and goat.

Slaughter house wastes-bone meal, meat meal, blood meal, horn and hoof meal, fish wastes.

Byproducts of agroindustries-oil cakes, bagasse and press mud, fruit and vegetable processing wastes.

3.1. Integrated nutrient management

Maintenance of soil fertility and plant nutrient supply at an optimum level for sustaining the desired productivity through optimization of all possible sources of organic, inorganic and biological components in an integrated manner.

3.2. Concepts

Regulated nutrient supply for optimum crop growth and higher productivity.

Improvement and maintenance of soil fertility.

Zero adverse impact on agro – ecosystem quality by balanced fertilization of organic manures, inorganic fertilizers and bioinoculants in an integrated manner.

4.1. Physiological disorders in field crops

Identification of physiological disorders in agricultural crops

5.1. Irrigation requirement of field crops

1.1. FYM compost

Decomposed mixture of dung and urine of farm animals along with litter and left over materials from roughages or fodder fed to the cattle.

Farmyard manure contains 0.5% N, 0.2% P₂O₅ and 0.5% K₂O.

Urine contains one per cent nitrogen and 1.35% potassium.

10 to 20 t/ha is applied, but more than 20 t/ha is applied to fodder grasses and vegetables like potato, tomato, sweet potato, carrot, radish, onion etc., respond well to the farmyard manure.

Crops like sugarcane, rice, oranges, banana, mango and coconut respond good to FYM.

Vermicomposting is the process of turning organic debris into worm castings by earthworms.

Earthworms feed on decaying material, pass through alimentary canals and excreted as castings.

pH of the castings is 7 (neutral) and the castings are odourless.

Contain high amounts of nitrogen, potassium, phosphorus, calcium, and magnesium.

Contains 5 times the available nitrogen, 7 times the available potash, and 1 ½ times more calcium and rich in humus.

Improves aeration, porosity, structure, drainage, and moisture holding capacity.

Preparations containing living cells or latent cells of efficient strains of microorganisms that help crop plants to uptake of nutrients by their interactions in the rhizosphere when applied through seed or soil.

Accelerates microbial processes in the soil.

1.1. Mushroom

Fruiting body of fungus appears above ground and contains spores.

Fungi are network of fine microscopic threads collectively known as mycelium.

Fungi are the part of the plant kingdom and don’t contain chlorophyll and root system.

Mushroom comes under sub division Basidiomycotina, order – Agaricales.

Rerd. L.L.Langstroth (Father of modern bee keeping) discovered movable frame hive in 1851.

In 1882, beekeeping was introduced in India.

In 1911, Rerd. Newton introduced beekeeping to South India.

1.1. Sericulture

Refer to rearing of silkworms for the production of raw silk.

Major activities are mulberry cultivation, silkworms spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits.

Bombyx mori is the most widely used. Silk-fiber is a protein produced from the silk-glands (modified labial glands) of silkworms.

1.1. Types of energy

1.1.1. Potential energy

Stored energy and the energy of position (gravitational).

1.1.2. Kinetic energy

Energy in motion - the motion of waves, electrons, atoms, molecules and substances. It exists in various forms.

2.1. Solar energy

States like Andhra Pradesh, Bihar, Gujarat, Haryana, Madhya Pradesh, Maharashtra, Odisha, Punjab, Rajasthan, and West Bengal have greater potential for tapping solar energy due to their location.

2.1.1. Advantages

Inexhaustible source of energy.

Environment friendly and inexpensive.

Variety of purposes like heating, drying, cooking and electricity.

3.1. Concept of farm mechanization

To apply the principles of engineering and technology to do the agricultural operations in a better way to increase crop yield.

Development, application and management of all mechanical aids for field operation, water control, material handling, storage and processing.

Mechanical aids include hand tools, animal drawn implements, power tillers, tractors, engines, electric motors, grain processing and hauling equipments.

4.1. Tractor

Self propelled power unit having wheels or tracks for operating agricultural implements and machines including trailers.

Tractor engine is used as a prime mover for active tools and stationary farm machinery through power-take off (pto) or belt pulley.

5.1. Farm machinery implements

5.1.1. Tillage

1.1. Livestock breeds

Denotes and established group of animals / birds having the similar general body shape, colour, structure and characters which produced offspring with same characters.

1.1. Cattle

1. Indigenous breeds

Milch: Sindhi, Sahiwal, Gir and Deoni

Dual: Hariana, Ongole, Tharparkar, Kankrej

Draught: Kangayam, Umblachery, Amritmahal, Hallikar

2.1. Breeds of poultry

1.1. Plant breeding

An art and science, deals with ways and means to change the genetic architecture of plants so as to attain a particular objective.

For ensuring food security, it is important to breed and develop new varieties that are high-yielding, pests diseases and drought resistant or regionally adapted to different environments and growing conditions.

2. 1. Plant domestication

Process of bringing wild species under human management.

2.1.1. Changes in plant species under domestication

Elimination or reduction in shattering of pods, spikes, etc.

Elimination of dormancy

Decrease in toxins of other undesirable substances. Eg. Bitter principle of cucurbits.

Cultivated plants show altered tillering, branching, leaf characters.

Decrease in plant height. Eg. Cereals and millets.

3.1. Selection

To isolate desirable plant types from a population.

3.1.1 Progeny test

Evaluation of growth of plants on the basis of performance of their progenies

Real value of plant could be known by studying the progeny.

4.1. Synthetic varieties

Produced by crossing in all combinations, a number of lines that combine well with each other.

5.1. Characteristics of asexually propagated crops

Majority of them are perennials

Many of them show reduced flowering and seed set.

Invariably cross pollinated.

Mostly polyploids.

Many species are inter specific hybrids.

Done for both biotic and abiotic stresses.

Biotic stresses are disease and insect pests.

Abiotic stresses are drought, salt, flood, heat, cold, etc.

Refers to entire operation of the induction and isolation of mutants.

Term mutation was introduced by Hugo de vries in 1900 in connection with sudden heritable changes observed by him in Oenothera.

Refers to induced chromosome manipulation

Aneuploidy-One or few chromosomes extra or missing from 2n.

Autoploidy-Genomes identical with each other.

9.1. Molecular breeding and marker assisted selection

Using conventional breeding, developing new varieties takes atleast 15-20 years.

Molecular breeding shortened the time to 7-10 years.

One of the tools for faster variety development is Marker Assisted Selection (MAS).

MAS-refers to use of DNA markers to assist phenotypic screening.

Plants that possess particular genes or quantitative trait loci (QTL) may be identified based on their genotype rather than their phenotype.

10.1. Heterosis

Occurrence of a genetically superior offspring from mixing the genes of its parents.

Superiority of F₁ hybrids over its both parents in terms of yield and vigour.

Crop production is challenged by abiotic and biotic stresses results in low yield and high production costs.

Magnitude and intensity of stresses are increasing dramatically due to climate change causing recurrent droughts, increased temperature (heat) and emergence of new diseases and pests.

12.1. Variety release

Superior cultivars are to be purified by breeder and tested for genuiness in 7 generations.

Then, they are forwarded to MLT after RYT, RRYT, PYT and CYT in respective research station.

Based on results of the MLT, strain is forwarded to Adaptive Research Trials (ART).

13.1. Germplasm

Also known as genetic resources or gene pool or genetic stock.

Sum total of hereditary material i.e. all the allele of various genes, present in a crop species and its wild relatives

14.1. PPVFR Act

TRIPS (Trade Related Aspects of Intellectual Property Rights) agreement of WTO (World Trade Organization) was signed.

Enacted PPVFR act in 2001.

Regulation formulated in 2003.

Term Biotechnology was first coined in 1919 by Karl Ereky which means products are produced from raw materials with the aid of living organisms.

Bio means life.

Technology means application of knowledge for practical use.

2.1. Biotechnology institutes

Regional office of ICGEB (International Centre for Genetic Engineering and Biotechnology) at New Delhi (Headquarters at Trieste, Italy established in 1983).

Lal Bahadhur Shastri Centre for Advanced Research in Biotechnology at IARI, New Delhi

National Institute of Animal Biotechnology, Hyderabad

3.1. GM or transgenic crop

Plant that has a novel combination of genetic material obtained through the use of modern biotechnology.

GM crop contains a gene(s) that has been artificially inserted instead of plant acquiring through pollination.

In 1994, Calgene’s delayed ripening tomato (Flavr-Savr) is first GM food crop.

1.1. Floral biology

1.1. 1. Types of inflorescence

Group or cluster of flowers arranged on a stem that is composed of a main branch or a complicated arrangement of branches.