eChapters

Introduction

Tree growing in hot arid region is basically concerned with the management of trees for conservation and for limited production objectives like wood for fuel, poles and fencing material; leaves for livestock fodder; and pod/seeds for many types use in human diet. The role of trees to conserve the fragile ecosystems of hot arid regions has been well recognized (Mann and Muthana 1984). The trees also provided so many services to mankind, which make them an intricate part of man-livestock-agriculture continuum, the lifeline of hot arid regions (Saxena 1997). 

Introduction

Throughout the arid zones, there is no dearth of problems, but rapidly increasing desertification (some call it land degradation) is a problem of worldwide dimension. Water is a scare commodity in arid zones. Much of rainfall is lost by evapo-transpiration and as a result, ground water recharged only by seepage through soil profile. However, it is a common phenomenon in arid zones of the world that ground water is frequently used at the rate that exceeds recharge. The situation in arid tropics of India, which is spread over an area of 31.7 million ha, is no more different. Considering the role of agriculture in the social and economic progress of developing countries, the vulnerability of agricultural systems to the impacts of climate change has received considerable attention from the scientific community (Fischer et al. 2002; IISD 2003; Kurukulasuriya and Rosenthal 2003). Much of the available literature suggests that the overall impacts of climate change on agriculture especially in the tropics will be highly negative, although in a few areas there may be minor increases in crop yields in the short term (Maddison et al. 2007). Research on agroforestry as an adaptation to climate change and as a buffer against climate variability is in the process of evolving.

Introduction

Agriculture expanded and forest dwindled. That eventually occurred with the expansion of civilization. Clearing of forests, granted in past, continued in modern times. Cutting of forests reached to such an alarming level that thinking of people turned back to create more forests. Sometimes over extraction of forest resources made forests unstable to yield perpetually according to necessity in future for which forests are turned unsupportive for livelihood and people tried for innovative means to enhance forest productivity in future (Nair 1993). Also with time agriculture faced the similar unfortunate condition towards intensive cultivation. So, peoples’ thinking turned back in agriculture how to make it stable and more supportive for livelihood year after year. Culturally human societies are connected both with agriculture and as well as forests from the time immemorial.

Introduction

Climate change is a big phenomena, it is having a huge impact on agriculture from ancient to present time. It has received wide attention and debate as the public concern has increased about unforeseen change in climate. The impact of climate change on Indian agriculture will be significant since more than 60% of Indian population depends on agriculture for their livelihood with the contribution of agriculture to GDP is approximately 20 percent. In recent decades, human induced changes in climate has the focus of scientific and social attention.

Introduction

Increasing evidence over the past few decades indicate that significant changes in climate are taking place worldwide and its effects are surreal. Major cause to climate change has been ascribed to the increased levels of greenhouse gases like carbon dioxide (CO₂), methane (CH₄), nitrous oxides (N₂O), chlorofluorocarbons (CFCs) beyond their natural levels due to the uncontrolled human activities such as burning of fossil fuels, increased use of refrigerants, and enhanced agricultural activities. Global average sea level has risen since 1961 at an average rate of 1.8 (1.3 to 2.3) mm/yr and since 1993 at 3.1 (2.4 to 3.8) mm/yr, with contributions from thermal expansion, melting glaciers and ice caps, and polar ice sheets. The climatic changes are resulting in erratic weather patterns and the impacts are already being manifested in many parts of the world and coastal agricultural systems are nearing crisis point. The IPCC has projected that during the 21st century the global surface temperature is likely to rise a further by 1.1 to 2.9 °C as per their lowest estimation model and by 2.4 to 6.4 °C as per their higher estimation model.

Introduction

Natural phenomena such as solar radiation, volcanic activity and ocean circulation influence climate and contribute to its variability. Evidence suggests that climate is now also changing as a result of human activities, such as the emission of greenhouse gases and changing land uses. The fourth assessment report of the Intergovernmental Panel on Climate Change (IPCC, 2007) concluded that the global average mean temperature and the frequency of hot extremes, heat waves, and heavy precipitation will very likely increase in response to increased concentrations of greenhouse gases in the atmosphere.

Society will have to make decisions in the coming years about how to adapt to a changing climate. Climate variability and climate change create risks to all sectors of the economy. Climate is already a prime factor in 9 out of 10 disasters, many of which cost billions of dollars and thousands of lives. Effective preparation for the possible effects of climate change requires the engagement of resource managers, planners, public works officials, local managers, community development specialists, businesses, residents, and property owners. The challenge is to provide these diverse stakeholders with trusted, useful, science-based information so that they in turn can make informed decisions. 

The annual milk production in Tamil Nadu during 2009-10 from crossbred cows, non-descript cows and buffaloes were 42.28,7.89 and 7.61 lakh tones, respectively. Tamil Nadu had 59.83 lakhs crossbred female cows in the year 2007 as against 41.47 lakhs in 2003 with an annual growth rate of 9.59 per cent (Anon, 2010). With the increasing crossbred cattle population and average annual production, better management of the high producers becomes a necessity. Production and health of animals depend mostly on environment in which they live. A satisfactory environment for any farm livestock is the one that ensures not only optimal productivity but also meets the health and behavioral needs of the animals. A satisfactory environment is the one that satisfies the following four criteria: thermal comfort, physical comfort, disease control and behavioral satisfaction. The most important environmental interventions done in recent days are those that have been done in housing and other attempts to ameliorate the thermal environment. The effort of the body to maintain a stable internal environment to challenges from widely variable environments was first described by Claude Bernard (1878) and later referred to as homeostasis (Cannon, 1932). An environment in which stressors are minimized would likely be favorable for efficient production of products derived from domestic farm animals and for helping ensure the well-being of those species.

The arid and semi-arid regions of India are drought prone and the availability vegetation of these regions is more acute during summer when the quality of the pastures becomes vulnerable. Small ruminants in the semi-arid regions need to adopt special physiological function to maintain thermal equilibrium. The reproductive efficiency of different breeds of sheep inhabiting in the semi-arid regions of India is relatively low (Arora and Garg, 1998).The nature of nutritional resources and management problems differs with climate, soil and vegetation, the physical process which governs the animals reproductive performance are the same; the female must reach puberty, show behavioral estrus and shed one or more ova which have then to be fertilized. Dietary nutrition promotes the programming and expression of the metabolic pathways that enable animals to achieve their genetic potential for reproduction. Nutrition has an important impact on the reproductive performance in sheep, but the magnitude of the effect on reproduction may vary with the season (White et al., 1983). Sheep are more prone to neglect compared to cattle and often suffer from lack of feed and fodder. The animals during the grazing are exposed to combined stress (Sejian et al., 2010 ab, and 2011) .This leads to decrease in body weight and loss of reproductive functions. Concurrently, Rhind and Mc Neilly (1986) showed that ewes with low body fat reserves had fewer large ovarian follicles and therefore the potential for subsequent maturation and ovulation declined. 

Introduction

Despite the predominance of attention to insects as pests, many insects are directly beneficial to humans, and as a result, mass-production methods have been developed. The most notable example is silkworms, although many other insects are mass produced for various purposes. For example, Lacewings, ladybird beetles, and some parasitoids are mass produced and sold as biological control agents against various pests. Bumble bees and alfalfa leaf cutting bees are mass produced as pollinators for greenhouse crops and alfalfa seed production, respectively. A major concern in any kind of mass rearing facility is the risk for pest and disease outbreaks. If pest and diseases are not controlled, a sudden collapse of the insect colony can occur and the quality and quantity of their product may be reduced. Sericulture is practiced by scores of farmers in the tropical, subtropical and temperate countries including India, China and other Asian countries. India produces 25,519 metric tonnes of silk and holds second position in the world in silk production (www.csb.nic.in). The Indian silk is comprised of mulberry silk produced by Bombyx mori (Insecta: Lepidoptera: Bombycidae). About 92% of India’s total raw silk production is from the mulberry silkworm. The silk produced by silkworms is known as “Queen of fibers” due to glittering luster, soft-feeling, elegance, durability and tensile properties.

Introduction

The Indian lac insect, Kerria lacca (Kerr) (family Tachardiidae (Kerriidae), super family Coccoidea of the order Hemiptera) is widely cultivated in India for their products viz., resin, dye and wax.Lac products have diverse uses in food, pharmaceuticals, surface coating, electrical, cosmetic industries, etc. Lac cultivation is one of the major sources of income for the tribal community of the country. India is the global leader in lac production. Out of 2 strains (kusmi and rangeeni) available in lac insects, Kusmi lac insects are specific to India and contribute good quality and quantity lac. Although lac insects can survive on more than 400 host plants, important host plants of lac insects are Butea monosperma (Palas), Schleichera oleosa (Kusum), Ziziphus mauritania (Ber) and Flemingia semialata in India.

Introduction

Almost all agricultural commodities include cereals which are stored in go-downs or store on large scale or small scale because storage of food grains is inevitable both in times of deficit and surplus production (Lal, 1985). The intensification of food production has led to several problems in the post-harvest phase including the major concern of pest infestation during storage. The post harvest losses in India have been estimated to be 12 to 16 million metric tonnes of food grains every year (Singh, 2010). The stored grain pests are serious pests of dried, stored, durable agricultural commodities and of many value-added food products and non-food derivatives of agricultural products worldwide.

Introduction

There are both ants and white-ants present in this world since long. Although wrongly called, white ants or termites are responsible for substantial losses due to their infestation or attack not only to agriculturally important crops, but also to buildings and constructions, which in other way creates a hurdle to advancement of civilization. It will be an injustice if the beneficial role of them rendered to the society is remained unmentioned. Their ability to digest cellulose helps these insects recycle the entire base of the nutrient of this earth. But in terms of wastage and destruction, particularly in buildings and constructions, it surpasses the other damages mainly in the sectors like agriculture. In a latest literature, it was estimated that the world suffered an annual loss of 40 billion USD, owing to the attack of termites on various constructions (Liston, 2015).

Pollination is the transfer of pollen from the male part of the plant to the female part of the plant of the same species. The anthers, the male part of the flower, produce pollen. The pollen must be transferred to the upper female part of the flower, the stigma. Here the pollen germinates and grows down the style (the elongated portion of a pistil that connects the ovary with the stigma of a plant) to where fertilization occurs and the seeds develop in the ovaries. A fruit is a ripened ovary.

Introduction

Cycling of plant material is required for any production system for biological activity, humus formation and thereby formation of a dark colored top soil. Incorporation of biomass results in production and proliferation of soil biota. But under annual crops compared to forest, production is much less, the biomass is largely removed, the soil is tilled several times each year. Consequently, less food and moisture are available for earthworms, insects, micro-flora and fauna; and their habitats are repeatedly disturbed or destroyed. Therefore, the primary need of our agricultural activities is to feed soil organisms (bacteria, fungi, earthworms etc.) and to regulate their living conditions while protecting them from chemical and mechanical impacts.

Issues of conservation have assumed great importance in view of widespread resource degradation and the need to reduce production costs, increase profitability and make agriculture more competitive. The growing concerns for sustainable agriculture have been seen as a positive response to limits of both low-input, traditional agriculture and intensive modern agriculture relying on high levels of inputs for crop production. Sustainable agriculture relies on practices that help to maintain ecological equilibrium and encourage natural regenerative processes such as nitrogen fixation, nutrient cycling, soil regeneration, and protection of natural enemies of pest and diseases as well as the targeted use of inputs. Agricultural systems relying on such approaches are not only able to support high productivity, but also preserve biodiversity and safeguard the environment. Thus, Conservation agriculture has come up as a new paradigm to achieve goal of sustained agricultural production. It is a major step toward transition to sustainable agriculture. 

Introduction

The basic principle of conservation agriculture is to minimize soil disturbance in order to stabilize the soil structure, increase the fertility and balance the eco-system. Applied together, conservation agriculture practices – no tillage, permanent soil cover, use of crop cover and crop rotation, residue management- have complementary positive outcomes; no tillage maintains soil structure and biological activity; a permanent soil cover protects the soil surface from erosion and creates a stable and favourable micro-climate; cover crops and residue management provides organic matter, reduce soil erosion and improves soil fertility. Management of the soil water balance should be considered as a positive for cover crops and improvement of soil water infiltration, reduction in soil water evaporation, and decreasing water extraction from the soil would impact subsequent plant growth.

Conservation agriculture (CA) refers to a set of agricultural practices involving three basic principles of proven scientific soundness. These include continuous minimum mechanical soil disturbance; permanent organic soil cover with crop residues or cover crops; and diversified, efficient, economically viable, appropriate spatial and temporal crop sequences providing opportunities for saving on inputs (labor, fuel, machinery etc.), improving resource use efficiency (water, nutrient, energy etc.) and mitigating GHGs emission with climate change adaptation. Recently research efforts have been made to refine the crop management technologies which are more resource efficient, improve production and income, and reduce GHGs emission compared to the conventional practices. Resource conserving technologies (RCTs) are increasingly being adopted by farmers in the rice-wheat belt of the Indo-Gangetic Plains because of advantages of saving on labor, water, fuel and cost along with timeliness in operations particularly early planting of wheat.

Introduction

Rice is grown 43.7 m ha land in India. It is cultivated in 39.51 m ha under kharif and 4.26 m ha under rabi season. As a whole, rice production in India was 104.32 m t (2011-12) with an average productivity of around 2.6 t ha-1. Majority of rice grown in India in the eastern part of the country comprises the states of West Bengal, Orissa, Chattisgarh, Assam, Bihar and Jharkhand. Maximum area under rice in eastern India in West Bengal (5.94 m ha) with a production of 15.04 mt. Productivity was maximum in West Bengal followed by Jharkhand, Assam, Bihar, Orissa and Chattisgarh (DOSE, MOA, GOA, 2011). There is a plenty of scope to increase the productivity of these region with proper policies and technological interventions. Rice area in eastern region (23.4 m ha) would be divided in different ecologies, namely, irrigated (23.2%), rainfed upland (17.9%), rainfed lowland (43.1%) and flood prone areas (25.1%).

Conservation agriculture (CA) has benefits to farmers in overcoming labor shortages associated with other tillage practices. With the introduction mechanized CA practices, farmers are able to finalize planting earlier, and can even free the equipment for service hire to neighbors. These CA equipment can reduce the delays in planting and also benefit neighbors who can hire this equipment and be able to plant within the first planting window, commonly associated with better yield gains. Smallholder farmers can also form groups to mobilize resources for equipment purchase to overcome the equipment cost problem. Local production of CA equipment for the smallholder agricultural sector has been almost non-existent prior to 2005.

Increasing consciousness about environmental and coupled health hazards with agrochemical usage in farming and resultant consumers’ preference to safe and chemical-free food are the major factors that lead to the interest in eco-friendly forms of farming in the world. Organic agriculture is one such broad spectrum of production methods in consonance with conservation agriculture that are supportive of the environment and is now practiced in not less than 130 countries to the tune of 30.4 mha in 0.7 million organic farms. In India, about 1.02 mha area is reported to be under organic farming (certified area and area under conversion) with nearly 0.5 lakh certified organic farms. It is believed that adoption of ecologically sustainable farming practices can provide twin benefits of reversing the declining trends in crop productivity and protecting the environment. The demand for organic food is showing an increasing trend with an average growth rate of 20-25% per annum.

Introduction

With the advent of agricultural intensification, soil quality has been the important concern for the scientists, environmentalists and the planners at the global level. Research efforts have been made at the experimental fields, research laboratories and few specific locations, in order to establish the yardsticks, standards and critical values of soil parameters to ascertain the quality of the soil. The primary aim is the management of soil resources as per the need and their rejuvenation through best practices in hand. The idea, as it was aimed at, has now percolated down to the minds of end users-the farmers. The state and Central governments have been sensitized and are attaching great priority to the soil health. In states like Tamil Nadu, Gujarat, Goa, Uttar Pradesh crores of farmers are given “Soil Health Cards”. Central Govt. has the plan to issue these cards to all farmers in the country, detailing the deficiencies in soil and the amount of fertilizer needed.

Introduction

In general economic model, technological change in agriculture is expected to cause the commodity supply curve to shift down and out against a stationary demand curve, giving rise to an increase in quantity produced and consumed, and at a relatively lower price. Agricultural economists have used supply and demand models of commodity markets to represent agricultural research impacts, beginning with Schultz (1953) and Griliches (1958), with important subsequent contributions by Duncan and Tisdell (1971), Akino and Hayami (1975), among others. Such a model is explicitly used in many studies. However, low crop productivity, food insecurity, hunger and malnutrition; inadequate farming knowledge and skills, implements and inputs are characteristic of smallholder agriculture in developing countries including India. Many researchers argue that conservation agriculture can guarantee higher crop productivity, food security, improved net income of the farmers and environmental protection, better than the traditional systems of cultivation practices.

Soil and nutrients are important factors for sustainable crop production in agriculture. Water erosion contributes more than 60% to the area under soil degradation in India. Soil erosion has been a serious threat to sustainable agriculture. However, soil and water conservation measures plays important role in improving the productivity of natural resources. India presently supports 17% of the global population with a geographical area of 329 Mha on merely 2.5% world’s land area and 4% fresh water resources. The net cultivable area in the country is about 140Mha is remaining constant or even squeezing from the pressures of urbanization, industrialization, infrastructure development and to house the ever increasing population. The loss of productive soil is another concern. The loss of fertile top soil by water erosion is estimated to be about 5334 Mt per year with it nearly 8.4 million tonnes (mt) of nutrients was estimated in eroded soil still holds true about in i.e. 2.5 mt nitrogen, 3.3 mt phosphorus and 2.6 mt potassium per hectare is lost due to ill soil and water management practices (Dhruvanarayana and Ram Babu, 1983).

Introduction

With the change in global scenario there is increase in pressure of meeting the food requirements of rapid growing population but due to scarcity of resources it is becoming very difficult to meet the needs of present population but even if there is so much problem still nature has provided solution to sort out from it through hybrid seed production through male sterility. As male sterility is a condition in which pollen grain is either absent or non-functional in the pollen grain. Its first case was reported by Koelreuter in 1763. Later many scientist have reported about its role in hybrid seed production. Mainly the male sterility is characterized by malformation of androecium, lack of normal anther sac, inability of pollen to mature or to release from the anther sac and inability to develop normal microspore or pollen. Due to such malformation male sterility is characterized into phenotypic male sterility, genotypic male sterility and chemically induced male sterility. Later in 1998, Kaul further generalised the phenotypic male sterility into structural, sporogenous and functional male sterility. In case of structural male sterility stamens are completely absent or if present then it is either malformed or modified into other floral part. While in case of sporogenous male sterility a case of abnormal microsporogenesis has been reported. In functional male sterility pollen development is normal but its function is impaired.Genotypic male sterility which is further classified into genetic, cytoplasmic and cytoplasmic genetic male sterility.

El Nino is the name given to the occasional development of warm ocean surface waters along the coast of Ecuador and Peru. When this warming occurs the usual upwelling of cold, nutrient rich deep ocean water is significantly reduced. El Nino normally occurs around Christmas and lasts usually for a few weeks to a few months. Sometimes an extremely warm event can develop that lasts for much longer time periods. In the 1990s, strong El Ninos developed in 1991 and lasted until 1995, and from fall 1997 to spring 1998.

Water is indispensable for our life. About 2/3 of earth is covered with water. No organism can survive without water. So keeping water free from any pollutant is very important. Water is said to be  “polluted” when it is hanged in its quality and composition directly or indirectly by man’s activity so that it becomes less suitable for drinking, domestic, agricultural or any other purpose. Polluted water transmits a large number of diseases in man. They are cholera, typhoid, dysentery, jaundice and other bacterial or viral diseases.  Water becomes polluted by the presence or addition on inorganic or organic substances or biological agents. Soil erosion, leaching of minerals from rocks, decaying of organic matter are natural sources of water pollution. There has been an alarming increase in the degradation of water quality in the recent past in the large cities and industrial areas.

Water pollution can be studied under the following heads—  (i) medium in which it occurs (surface water, ground water); (ii) habitat (lakes, estuaries and open seas); and (iii) type of pollutants (bacterial, metallic, thermal and radioactive).

For the hundreds of thousands of years that we lived on earth,there were few rapid changes in the atmosphere. It is only in recent times, particularly since the Industrial Revolution, that our activities on earth began to modify our environment in a significant manner.  Industrial pollution has affected the water we drink, the air we breathe, and in general,the biosphere itself.Now noise has joined the bandwagon of pollutants.

Noise certainly comes within the scope of definition of a pollutant that “..... any undesirable change in the physical, chemical or biological characteristics of our air, land and water that may or will harmfully affect human life or that of any other desirable species or industrial process, living conditions or cultural assets, or that may or will waste or deteriorate our raw material resources.”

Abstract

Water is an indispensable natural resource for sustaining the environment, supporting life and responsible for sustainable agricultural growth and development wherein agricultural sector is the major user of the water resource. The integrated management of water resources could only be possible through adoption of efficient and optimum use of irrigation water, which could only be ensured by judicious and economic use of irrigation potential whatsoever created to increase crop production. The integrated water resources management also includes the concept of rainwater management that has got an immense important on the way to develop the rainfed farming system. Previously, rainfed agriculture was associated primarily with conservational land treatments to check soil erosion and land degradation. But in the areas of medium to heavy rainfall, there is ample scope of tapping excess rain water through suitable water harvesting structures constructed for this purpose for its subsequent uses as irrigation or to apply lifesaving irrigation to the crops which should also come under the purview of water management for crop production.

Abstract

Biological drainage relies on vegetation, rather than engineering mechanisms to remove excess soil water through evapo-transpiration. It is often considered attractive because it requires only an initial investment in site development (planting of a “bio-drainage crop”) and (potentially) returns a benefit when the bio-crop is harvested for fodder, wood or fibre. Presently about one-third of the world’s irrigated area faces the threat of waterlogging. Considering long-term viability of bio-drainage, the systems would be subjected to the same scrutiny as other plant-based biological systems with regards to nutrient and salt-balance and soil considerations. Moreover, large-scale adoption of bio-drainage crops could include considerable tracts of land and socio-economic considerations.

Abstract

The increase incidence of plant diseases have created challenging troubles in commercial agriculture and posed economical threats to both conventional and organic farming systems. To combat these problems there has been indiscriminate use of the synthetic chemicals that created different types of environmental and toxicological problems. Therefore attention has been directed towards exploitation of plant products or phytoextracts as novel chemotherapeutants in plant protection. Numerous botanical pesticides have been used globally and more has been discovered in due course of time. Pyrethroids, neem, etc are well established commercially as botanical pesticides and recently some essential oils of higher plants have also been used as antimicrobials as they are safe and widely accepted by the consumers. Use of phytoextracts may thus offer a new source of antibacterial, antifungal and antiviral agents against microorganisms. Botanical pesticides are best fitting for organic food production in industrialized countries and can plays greater role in the production and post-harvest protection of food products in developing countries.

Abstract

Organic farming is a method of crop and livestock production that involves much more than choosing not to use pesticides, fertilizers, genetically modified organisms, antibiotics and growth hormones. Organic fruit production essentially excludes the use of many inputs associated with modern farming, most notably synthetic pesticides and fertilizers. Organic agriculture, the innovative farming system can build-on and enhance the traditional knowledge and practices of local and indigenous communities. Indigenous Knowledge can be broadly defined as the knowledge that anindigenous (local) community accumulates over generations of living in a particular environment. ITK in fruit production is important for reducing the cost of cultivation, reducing the pollution and also the natural resource base. It is very important to understand these age old practices to address the local problems and to document it before is vanished away.

Accurate early diagnosis of pregnancy is essential for successful breeding programme.

Ability is required for successful practice.

Skill is to be developed to indicate the duration within weeks in early and months in late pregnancy.

Canopy management is the manipulation of tree canopies to optimize the production of quality and quantity fruits. The canopy management, particularly its components like tree training and pruning, affects the quantity of sunlight intercepted by trees, as tree shape determines incoming radiation. Light is critical for growth and development of trees and their fruits. The green leaves harvest the sunlight to produce carbohydrates and sugars which are transported to the sites where they are needed – buds, flowers and fruits. Better light penetration into the tree canopy improves tree growth, productivity, yield and fruit quality. The density and orientation of planting also impact light penetration in an orchard (Proietti et al., 2000). Generally, in close planting, quicker shading becomes a problem. An east-west row orientation results in more shading as compared to the western and southern orientation of trees. The problem of a fruit grower is initially to build up a strong and balanced framework of the trees, then equips them with appropriate fruiting.

The first step of sexual reproduction (Flowering) is of paramount importance in agriculture, horticulture and plant breeding. The change from the vegetative state to the reproductive state is one of the most dramatic events. Flowering leads to an exciting succession of events like anthesis, fruit set, fruit development, maturation and ripening. It provides for the propagation of the species and assists in crop improvement through genetic recombination. Plant growth regulators have remained an important component in horticulture, agriculture from time immemorial, because they were effective means of quantitative as well as qualititative improvement in growth and development of crops. Plant growth and development as well as the responses to environmental factors, are highly regulated by complex and coordinated action of the endogenous hormones (Reddy and Bhagwan, 2014).

Abstract
 

Ensure enough food and water to the growing world population and preserve the biodiversity of our planet are among the major challenges of our immediate future. These challenges are essentially addressed to the agricultural world, which is constantly evolving to satisfy the most basic needs of the humankind. The approaches and the possible answers to these big challenges are many and, even if partial, each sustainable solution or innovation can contribute to improve the quality of our life. To overcome the barriers for food and nutritional security microgreens is one of the possible innovative approach in this 21st century. A microgreen is a young vegetable green that is used both as a visual and flavor component or ingredient primarily in fine dining restaurants. Fine dining chefs use microgreens to enhance the attractiveness and taste of their dishes with their delicate textures and distinctive flavors. Smaller than “baby greens,” and harvested later than sprouts, microgreens can provide a variety of leaf flavors, such as sweet and spicy. They are also known for their various colors and textures. Among upscale markets, they are now considered a specialty genre of greens that are good for garnishing salads, soups, plates, and sandwiches.

Abstract

The irradiation process involves exposing the food, either prepackaged or in bulk, to a predetermined level of ionization radiation. In this process, it is important to know sources of ionization radiation, how energy is quantified, and its scope with advantages and limitations.The traditional methods like preservation, such as drying, smoking and salting have been supplemented with pasteurisation (by heat), canning (commercial sterilisation by heat), refrigeration, freezing and chemical preservatives. ‘Food irradiation’ is another technology that can be added to the list. By realizing its importance present chapter highlighted with some basic aspects as well as its applications and other related aspects of food irradiation. Food irradiation involves basic principles like; Pasteurization (Pathogen Reduction) 2. Sterilization 3. Sanitation 4. Disinfestation. As concern to dosage can be applied as  low, medium and high based on type of radiation, type of food, type of packaging material and time of application. It has broader range of application in preservation with this also has few limitations which have become bottlenecks in this technology. Though technology is employing much in developed countries rather than developing once. Prospectus should be given in those countries also.

Abstract

The term nano technology, buzzword of present day science owes its origin from the Greek word ‘nano’ literally meaning dwarf. It is expressed in terms of dimension one nanometer equals to one billionth of a meter (1nm=10-9m), work on the principle of particle movement, smallest particle accelerate fast in the system. The nano technology deals with manufacturing, study and manipulation of matter at nano-scale (or atomic scale) in the size range of  1-100 nm, called as nanoparticles (Rajan, 2004). Nano technology is one of the most fascinating and rapidly possessing potential to revolutionize in science and technology of medicine and agriculture. In plant pathology, nano technology has potential scope to detection, diagnosis and management of plant diseases. Micromechanical cantilever arrays for selective immobilization and fast quantitative detection of vital fungal spores (Nugaeva et al., 2005). Micro-fabricated chambers designed to mimic some of the features of xylem vessels and discovered that Xylella fastidiosa migrates via type IV pilus-mediated twitching motility (Meg et al., 2005). Antifungal properties of chitosan, chitosan-saponin and Cu-chitosan nanoparticle reveal against phytopatogenic fungi namely Alternaria alternate, Macrophomina phaseolina and Rhizoctonia solani (Sharan et al. 2013). 

Chocolate is a product that requires complex procedures to produce. The process involves harvesting coca, refining coca to cocoa beans, and shipping the cocoa beans to the manufacturing factory for cleaning, roasting, grinding , ref ining , conching , moulding and enrobing operations which are accomplished using wide range of machinery. A few have been discussed in this chapter.

1. Bean Roasters

When cocoa beans were first brought to Europe, the method of roasting was quite simple, often consisting of no more than metal trays suspended by chains over a fire, an ancient Middle Eastern technique for roasting coffee. The beans would be stirred by hand with a long stick or paddle until the roast was complete. Needless to day, this was very labor intensive and inefficient. Clearly, something more efficient was needed. The next development in roasting technology was not that far distant from roasters in use today. Metal cylinders or balls that could hold up to several pounds of cocoa beans would be suspended over the embers of a fire. A rod would run through the center and act as an axis upon which the roaster would turn. A hand crank on one end would allow the cylinder or ball to be turned while the beans were roasting. The result was a much more even roast than was before possible. Aspects of this technique remain in many of today’s roasters.

A hen can produce eggs without mating by a cock. Such an egg is edible but infertile and will not hatch. If the hen is naturally or artificially inseminated with poultry semen, the spermatozoon unites with the ovum to form a fertile egg that will hatch after incubation. Unlike mammals, the embryo of birds grows independently within an enclosed hard structure called shell and thus, all nutrients required for embryonic development are contained in the egg. The yolk, albumen, shell membrane and shell protect the developing embryo apart from providing well balanced nutrients.

In modern poultry farming, successful management relies on accurate and complete daily record keeping. Some of the traits may influence the profit of farm, thereby affecting the economics of the farm than the other traits, and hence they are called economic traits. Economic traits can be defined as those traits which are economically important and improvement in these traits would increase the profit of the farm. These traits are generally assumed to be controlled by the genes at larger number of loci. Some of the economic traits in egg and meat type chickens are as follows:

Selection of site for a poultry farm: The following points should be considered while selecting site or location for a poultry farm.

The farm should be located at an elevated area with proper facilities for drainage.

To protect the farm against strong wind, tall trees may be planted surrounding the farm complex.

The farm should be located not too far from city to bring in and take out materials.

The commercial farm should be located near to marketing centres.

The breeder farm should be located in an isolated area away from commercial farm to ensure biosecurity.

The farm should have an easy access to connecting roads.

The site should have provision of electricity.

The desirable soil type for a poultry farm is loamy or sandy loam.

There should be provision of abundant potable water at the site. The water should be tested for various impurities like total solids, microbiological contamination, high percentage of salts of Na, K and Chlorine, nitrite, nitrate etc. Total bacterial count and Coliform count should be 0/ml.

Project for Rural People on Chicken

For rural people Desi (indigenous) chicken plays an important role. Family poultry farming is a part and parcel of a typical rural household in India touching social, cultural and economic aspects. People residing in rural areas primarily maintain their indigenous chicken under backyard farming. With the same management system the rural people can rear improved varieties of chicken instead of their traditional counterpart. The improved varieties being Giriraja, Vanaraja, Kuroiler, Gramapriya, Gramalaxmi, Swarnadhara, Krishna J etc. A model project on improved chicken is given herewith:

A unit consisting of 100 number Vanaraja or Giriraja is economical and remunerative to the farmers whose family labour will be utilized for rearing these chickens. Initially, the farmer will buy about 225 straight-run day- old chicks. The males will be sold at 20 weeks of age. The females will be maintained for 1.5 years. In order to have continuous operation, next batch of 225 chicks have to be procured 6 months before disposal of the old batch. Birds will collect their feed through foraging or scavenging in the field. Supplementary feeding will be provided to meet their requirements.

Care and Management of Commercial Growers (09-20 weeks) Under Deep Litter System

Grower management essentially remains the same as that of chick management (brooding management) except for the additional space required for floor, feeders and waterers to keep with the size of birds. The growers may be reared in separate grower-houses or continued to be reared in brooder-cum-grower houses.

Floor space: 1260 cm² (1.4 ft²) per bird.

Feeder space: 6-8 cm per bird. One linear feeder of 120 cm length and 8 cm depth for 40 growers.

Waterer space: 2 cm per bird; a circular waterer of 36 cm and 8 cm depth of 6 lit. capacity for 50 growers. Growers are to be provided with fresh, cool and potable drinking water at least twice a day. Water requirement is increased during hot days. Care must be made not to spill water on litter.

Lighting management: No artificial lighting is given other than natural day light since they require only 9 hours of light per day.

In India, poultry judging refers to selection of birds on the basis of their physical appearances, breed characteristics and production performances; however, in other countries, like USA judging is also used for eggs, carcasses and further processed products. The Directorate of Extension, Ministry of Agriculture, Govt. of India annually conducts livestock and poultry shows in various parts of the country in collaboration of state governments. Besides, state Agricultural/ Veterinary Universities or other institutions also conduct such shows. In these shows judging contests are carried out mostly for the undergraduate students by using a score card to grade birds either for production characters or breed characters. The winners are awarded trophies and cash prizes. The birds meant for judging are kept in individual cages and the participants are requested to score under various sub-headings and to finally rank the bird. Any deviation from “ideal” or “perfection” (as described by the American Standard of Perfection or the British Poultry Standards) but not serious enough to constitute a disqualifications in the show room is considered to be a defect. Serious defects are regarded as disqualifications and will bar a bird from winning any prize. Both layers and broilers can be physically evaluated for their performance rating.

The selection of right dog for the required purposes like watching, hunting, guarding, showing, companionship and even animal associated therapies nowadays, warrants a detailed information on various dog breeds, like physical and other specific characteristics which may be different to each other. This  chapter  gives important characteristics of dog breeds and guidelines for buying a pup.

1    Disease diagnosis based on posture, gait appearance and clinical signs

1    Common diseases affecting livestock

2    Disease information

3    Diseases of skin

4    Diseases of muscuoskeletal system in canines

1    Large animals

2    Canines

3    Suggested antimicrobial/antifungal agents for intra-uterine administration

4    Commercial preparations of hormone(s) and recommended dosage protocol in cows

5    Drugs safe & contra indicated in pregnancy

Laboratory investigation of the samples assist in diagnosing, confirming the cases including veterolegal cases. The type of material, quantity of specimens & preservatives used and the method of dispatch to the laboratory  is tabulated in this chapter.

Reduced capacity or incapacity to fertilize by males/Impotentia generandi: Fertility is the normal functioning of the testes, accessory sex glands and ducts to deliver sperm of normal quantity and quality. Infertility or sterility in males is usually characterized by normal sexual desire and the ability to copulate and ejaculate but a complete or abnormally high percentage of failure of fertilization or conception. It may be seen when semen is normal on examination and on the other hand, the semen is abnormal in sperm morphology, concentration, motility and other qualities.