eChapters

Introduction

Farming system that advised integrated the needs of the ancestors the economic factors like profitability, amusing acceptability and economically active and technically achievable enterprises in a accumulated furnishings wherein availability of acreage resources, basement and institutions such as irrigation, marketing facility business accessories including storage and transportation and credit besides the agro biological application namely interdependence. Technically achievable enterprises and the achievement of individual farmers are to be advised as above factors in farming system approach. Farming system, therefore, designates a set of agronomical activities organized while attention acreage productivity, anatomy superior and advancement adorable similar of biological assortment and ecological stability. The accent is added on a system rather than on gross output. In added words farming system is an ability administration action to accomplish bread-and-butter and sustain agronomical accumulation to be accommodated a sorted claim of the acreage domiciliary while attention the ability and advancement top quality. Farming system in its absolute faculty will advise the afterward agency to lift the abridgement of Indian farming and accepted of active of the farmers. Farming system distinctively refers to an accumulation aggregate of enterprises in which the articles and or the byproducts of one action serve as the inputs for accumulation of added enterprise. Farming systems access has appear after than that farming came into actuality getting strategically activated as breadth specific suitability. Farming systems decidedly contributed to the re-silence of farming and as able-bodied as affluence farming, organic farming and inorganic farming. Agro-climatic regions of the country are abounding adapted and differed from breadth to breadth wherein types of farming are as well different. Somewhere, the farming is based on horticulture, ley farming, agroforestry and abounding added like farming of agronomic crops. India’s bounded locations are amenable for such variations, as the assertive locations acquaintance altered climates, appropriately affecting anniversary region’s agronomical abundance differently. India is actual abased on its vagaries of cloud burst abundantly to accord satisfactory crop yields. India’s farming has all-encompassing accomplishments which go aback to at organic 10 thousand years. Reportedly, the country holds the additional position currently in agronomical accumulation in the world. In 2007, farming and affiliated industries fabricated up added than 16% of India’s GDP. Despite the abiding abatement in agriculture’s addition to the country’s GDP, now the farming is getting advised as the bigger activities antecedent of alimentation in the country and plays a key role in the socio-economic advance of the country. Now a day, India is the additional bigger ambassador of wheat, rice, cotton, sugarcane, silk, groundnuts, and of abounding more. It is as well the bigger farming of vegetables and fruit, apery 8.6% and 10.9% of all-embracing production, respectively. The above fruits produced are mangoes, papayas, sapota, and bananas. India as well has the bigger amount of livestock in the world, captivation 281 million. The country housed the additional bigger amount of animals in the tune with 175 million in the year 2008. In this accomplishments the apperception of farming system, appropriately was demography application as aggregate of agri-horti and animals, veterinary including fisheries taken into account as integrated approach.

It is a discipline of science that describes handling, preparation and storage of food that can prevent food-borne diseases. When there are two or more cases of a similar illness from the ingestion of the same common food it is known as a food-borne disease outbreak (FSN, 2018). In order to avoid potential health hazards, food safety is very important. This needs safety between industry, market and the consumer. For food safety the labelling on food material is vital. This includes the origin of food, steps taken for food hygiene, food additives, pesticide residues, policies on biotechnology, food guidelines for the management of governmental import, export inspection and certification systems for foods. The food should be safe in the market with safe preparation and delivery of the food for the consumer. Foegeding et al., (1996) have done an assessment of risk factors with food borne pathogens.Warnock et al., (2007) have reported intervention to food safety.

When pathogens are in the food they may be transmitted to the consumer. It may result in an illness or death of the person or other animals. The pathogens include bacteria, viruses, molds and fungus. These multiply in the food medium. Joon et al., (2012) have found pathogenic bacteria in meat products of Korea. The developed countries have high intricate standards for the preparation of food; however, in the developing countries there are less standards and enforcement of the standards which are followed. Apart from food another major source of infection is water, which is very critical in spreading many diseases. It is possible to prevent food poisoning if good water is used for all purposes. However, it becomes difficult as in the food supply chain a large number of persons are involved apart from the fact that pathogens can be introduced into foods no matter how much precautions are taken. Cowden (2000) has studied the notification on food poisoning to improve health. Frenkel et al., (2015) studied the amount of wastes from food processing industries.

1.1 The 7 P’s Framework for Agro Industry

The marketing mix

Marketing mix refers to Set of airities that the organization was to promote (or) Market their component.

Updating the 4P’s

McCarthy classified various marketing activities into marketing. Mix tools of four brand kinds which he called the four P’s of marketing. [Product, Price, Place & Promotion]

The 4P components of marketing mix

Product: Refers to list of Products and Services that the organisation is involved in sol off eg-Brand name size , Service warranties etc.

Price: Price is determined by demand for the goods and the cost of the goods. Examples of various pricing strategies: introductory prices, sale prices, odd pricing etc.

2.1 Setting Business Goals and Objectives

Well-chosen goals and objectives point a new business in the right direction and keep an established company on the right track. When establishing goals and objectives, try to involve everyone who will have the responsibility of achieving those goals and objectives after you lay them out. To help you better understand how you can set goals and objectives, you first need a good foundation for what the two are.

Goals establish where you intend to go and tell you when you get there. They help improve your overall effectiveness as a company — whether you want to increase your share of the market, for example, or improve your customer service. The more carefully you define your goals, the more likely you are to do the right things and achieve what you wanted to accomplish in the first place.

Objectives are the specific steps you and your company need to take in order to reach each of your goals. They specify what you must do — and when.

Basic LabTechniques - This laboratory is intended to:

(1) Provide an introduction to basic techniques used in biology labs

(2) provide some experience with the equipment employed in future labs

2.1 Microscopy

The compound light microscope is a veryimportant tool in the study of biology. Typical compound light microscopes allow specimens to be viewed at 400 to 1000 times their actual size (total magnification is determined by multiplying the objective lens magnification by the ocularlens magnification). Thelight microscopeis made up of a system of lenses aligned in such a way thatallows magnification, as well as improved resolution. The resolution obtainable is also dependent on contrastin the specimen. Contrast can be adjusted with the iris diaphragm, located below the condenser lens,and can also be enhanced by the addition of stains to the specimen.

Scientific drawings of specimens observed under the light microscope are often used to provide a record of what was viewed. Proper scientific drawings should be neatly drawn,with smooth lines, in pencil (they should never be in colour). More than one cellshould be drawn to illustrate the cellularassociation to the observer(e.g.found singly or as part of a tissue). Labels should be added using straight horizontal lines to the right side of the drawing, and care should be taken with singular and plural forms of structural terminology. To demonstrate differences in density of specific structures, use stippling rather than shading. A figure caption thatindicates the specimen viewed, how viewed, and the to right side of the drawing, and care should be taken with singular and plural forms of structural terminology. To demonstratedifferences in densityof specific structures, use stippling rather than shading. Afigure caption thatindicatesthe specimen viewed, how viewed, and the magnification of the drawing is always necessary.

Equipment

1. Adjustable pipette.
2. 20-ml glass beaker.
3. Atomic Absorption Spectrophotometer.

ABSTRACT

The multi-sensor airborne geophysical survey was carried out over Nalgonda district, Andhra Pradesh, during the field season 2002-03, with an objective to locate potential areas for mineral exploration. The area comprises older metamorphic rocks of Peninsular Gneissic Complex of Archaeanage represented by gneisses, granite, amphibolite and banded magnetite quartzite. Leucocratic intrusive granite, extending over a length of about 40 km around Suryapet in NNW-SSE direction exhibits intense fracturing. Two sets of vertical to sub-vertical fractures have been noted in granite. Yellow stains observed in granite near fracture planes reveal the presence of secondary radioactive mineral encrustation. The ground magnetic and spectrometric observations indicated that the uranium mineralization is confined to these fractures in granite. Petrographic, ore-microscopic and scanning electron microscopic studies revealed evidences of metamict alteration surrounding monazite/apatite inclusions within biotite, and magnetite grains in granite. These studies also indicated evidences of discrete grains of uraninite / coffenite / pitchblende (containing Thand Ce). Chemical analysis of the rock samples (by NAA) collected from anomalous zone reveal high uranium concentration of the order of 1200 ppm, marked by high values of total Rare Earth Element concentration (800 ppm).

The leucogranites are characterized by high LREE and a negative Eu anomaly suggesting plagioclase fractionation. An ultramafic enclave near village Kutubsahipur shows highest concentration of both uranium (1240 ppm) and REE (890 ppm) analyzed by BARC and NAA Lab, GSI.

ABSTRACT

Coastal zones are credited for the important role they play in the economic, industrial and commercial activities of many countries. Starting from the early fifties of the last century, coastal zones have attracted greater attention from the earth scientists owing to the discovery of huge hydrocarbon deposits in the Persian Gulf, Africa and South America. In addition, coastal zones especially those bordering Precambrian Cratons house significant quantities of economically important placer minerals which are being explored and exploited vigorously. In the present paper, sedimentary basins located along the continental margins of Tamil Nadu state, their geology and hydrocarbon potential are discussed. In addition, an attempt has also been made to demonstrate the usefulness of remote sensing techniques in the exploration of this strategic mineral.

ABSTRACT

In Tamilnadu majority of the people are engaged in agricultural work and they mainly depend upon the water resources. But at present both surface and subsurface water has become deficient because of over exploitation. Since last few years, conventional methods were employed to improve the surface and subsurface water conditions. But these methods provide less accurate result and consume more time. So to improve the conditions modern tools, such as remote sensing and GIS are being used to identify the ground water potential zones in Tamilnadu. It provides accurate resulst and consumes less time.

A project was carried out in Gadilam lower sub basin which falls in the part of Cuddalore District, Tamilnadu. The IRS 1D imagery was collected and interpreted using image processing software and Geo media GIS Software in conjunction with collateral data to prepare Hydro geomorphology, land use, geology and lineament maps Field checks were made and transferred the field data on the base map. By application of overlay analysis of the above thematic maps, using GIS techniques, the recharge zones were identified.

The satellite image mosaic map of Gadilam lower sub basin was generated to identify ground water potential zones. Average monthly rainfall data for the past 50 years were collected. Using Remote sensing and GIS techniques, the thematic maps such as Geology, Geomorphology, Soil, Drainage, Land use, Lineament zones have been generated for this study. Geophysical survey was also conducted in various locations and the aquifer parameters were measured. Details related to land and water resources, cropping pattern, water levels and water qualities from PWD ground water division, land use and well censes data of villages from village Administrative Officer, tank details from PWD were collected and analyzed

After analyzing the various thematic maps, they were finally overlaid. Thus the groundwater potential zones of Gadilam lower sub basin was identified.

ABSTRACT

Due to complex hydrogeological conditions it becomes very difficult to prospect the ground water resources especially in drought prone areas where the water table is very deep. The interpretation of geoelectrical sounding curves also becomes ambiguous. A semi empirical method namely theinverse slope method [Shankar Narayan and Ramanujachari, NGRI] is widely used since it is simple to operate without standard curves etc and it gives fairly good results. In some Government organizations like PWD [Ground Water Department] and TWAD Board of Tamilnadu, this inverse slope method is widely used for ground water exploration. Based on this methodology, ample of bore well points have been recommended in complicated hard rock terrains and the success rate is found to be encouraging. The study area, Kavalpatti, of Palani taluk in Dindigul district is a crystalline rock terrain, where geological, hydrogeological and geoelectrical investigations have been carried out to explore the ground water potential zone for agricultural purpose. The bore well drilled to a depth of 32 m has yielded 370 lpm. The interpreted geoelectrical section has been correlated with the litholog of bore well. Some bore well statistics [bore well points recommended based on this method] has been furnished, which reveals that this methodology is encouraging.

ABSTRACT

Airborne geophysical methods are presently used all over the world to support mineral exploration by providing basic geological information to supplement existing geological maps. The popularity of airborne geophysics is due to its lower cost for unit of area surveyed, as compared to all other methods of exploration. South India has been extensively covered by high altitude regional aeromagnetic surveys jointly by GSI and NRSA, low altitude multi-sensor surveys by foreign agencies, viz. M/s. Parsons, U.S.A. (Operation Hard rock Project) and BRGM/CGG, France, on contractual basis for GSI and by GSI (Twin Otter surveys) in selected belts and low altitude aeromagnetic surveys by NGRI in the SW part of the Cuddapah basin and the adjoining crystallines. Integrated studies of geophysical (airborne and ground), geological and remote sensing data have greatly helped not only in augmenting the geological knowledge of the region, but also in identifying several metallic prospects/ deposits. The present paper illustrates several case studies in demonstrating the utility of aerogeophysical data in geological mapping (identifying lithologies, structures and basement characteristics) and locating metallic prospects/ deposits.

ABSTRACT

Kadayampatty Panchayat Union is situated in the northern part of Salem district, adjoining the Dharmapuri district of Tamil nadu. It lies between the latitudes 11°45’ -12°N and longitudes 78° -78°15’E in the Toposheet No.58I/1. The study area mainly consists of the rocks of late Precambrian age that are characterised by migmatitic gneisses, Ultramafic rocks and Pyroxenite. In this study an attempt has been made for demarcating groundwater techniques. Resistivity of rock formation varies over a wide range, depending on the material density, porosity, pore size and shape, water content, quality and temperature. In relatively porous, highly jointed and fractured formation the resistivity is controlled more by water content and quality with in the formation then by the rock resistivity. For demarcating groundwater potential zones in the Kadayampatty Panchayat Union water table analysis and ten Vertical Electrical Sounding (VES) followed by Schlumberger electrode configuration were carried out. The maximum depth of investigation was 150mts. The electrode spreads were generally in steps of five meters interval up to 50 mts and 10 mts interval up to 150 mts. VES location were selected with in the study area with respect to their topographic features. Inverslope method proposed by Sankaranarayan (1974) et.al has been used to evaluate the geoelectrical parameters in order to demarcate to potential groundwater zones for new dug well and bore well locations. The lithological interpretation reveals that the presence of a maximum of five geoelectrical formations in the study area viz. Topsoil, weathered zone, fissure and fractured zone, fracture basement and fresh basement. Howevers all five formations do not occur throughout the study area, as the maximum and minimum of geoelectric layers are four and three respectively. Similarly a thin geoelectric layer was observed in some places also. The comparatively high resistivity values with corresponding high values of thickness are indicative of a wide stretch of unweathered and unfractured fresh rock layers. A highly weathered (saturated) basement is indicated by the extremely low resistivity value. The depth to the fresh basement varies.

ABSTRACT

An integrated geological, hydrogeological and geophysical analyses have been made to delineate groundwater potential zones in the Omalur Panchayat Union, Salem district, Tamilnadu. Sarabanga river is a major stream originating from western slope of Shevaroy hills. The tributaries are essentially consequent types. They are ephemeral in nature and the flow is restricted to the monsoon seasons. The flows of the streams are controlled by lineaments. Low drainage density, stream frequency and low relief indicate relatively high recharges and low runoff. The main lithological units are unclassified gneiss, grantite, charnockite, younger ultramafic rocks and recent alluvium. Ten vertical electrical soundings (VES) were carried out using Schlumberger electrode configuration. The maximum depth of investigation was 150meters when the electrode spread was generally in steps of 5 meters interval up to 50 meters and 10 meter intervals up to 150 meters. The field data were interpreted with the help of inverse slope method. Inverse slope field graphs reveal that in most of the locations, the aquifer consistsof five layers and third and fourth layersare normally weathered and highly fractured layers. These layers have attained a thickness range from 10 to 60 meters at the Tholasampatti, Sikkampatti, Pagalpatti and Sakkaraichettipatti. Correlation between the result of the VES data and the well lithology will be very useful in evolving ground water potential zones. Bore wells, dug wells in this area are normally sinking type wells. It will receive water only from the weathered, fissured and fractured zones which act as a favorable layers zones for tapping groundwater.

ABSTRACT

Microalgae in general and Cyanobacteria in particular are considered to be ideal biotechnological tools for their importance in the production of food, feed, fuel, fertilizers, fine chemicals and pharmaceuticals and their role in pollution abatement. So far, only 20 strains of microalgae have been cultivated for industrial purposes. To make use of more such organisms, it is essential to first identify their biodiversity in the naturally occurring populations and establish their germplasm for further characterization. With this in view, a detailed survey was made to study the biodiversity of Cyanobacteria in the Veeranam lake soil microflora in the Cuddalore district of Tamil Nadu. Influence of physico-chemical parameters habitat preferences of these soil microalgae, and their light and Electron microscopic features have been documented. The selected species of Cyanophyceae were subjected to energy dispersive spectroscopic analysis (EDS). They were found to accumulate different elements such as Zn, P, Mg, Ca, Mn, S and N. Thus these observations would determine the chemical dialogue between the cell structures and role of the elements. Further, it gives the clue about the soil microflora growth requirements.

ABSTRACT

A watershed is a topographically delineated area that is drained by a stream system, i.e. the total land area above some point on a stream or river that drains past that point. The watershed is a hydrologic unit that often is used as a physical – biological unit and a social – economic political unit for the planning and management of natural resources. Remote Sensing (RS) and Geographic Information System (GIS) techniques can be used effectively to generate the land use/land cover for evaluating the changes in an area. Conventional methods of runoff measurements are not easy for inaccessible terrain of Tamilnadu. Remote sensing technology can augment the conventional method to a great extent in rainfall-runoff studies. In this study, SCS Curve Number technique modified for Indian condition has been used for generation of CN for an ungauged watershed. A sub watershed of Manimuktha watershed is considered as study area. The daily rainfall data of Virudhachalam rain gauge station is collected and used to predict the daily runoff from the watershed using GIS based Soil Conservation Service -Curve Number (SCS – CN) method (USDA, 1972). Monthly and annual runoff values are obtained from the daily runoff values of the watershed. Base map, Soil map and Land use map of the study area are prepared by using Remote Sensing data and Survey of India (SOI) toposheets. PC Arc/Info GIS software is used for analysis.

ABSTRACT

The present paper highlights the implication of geochemical strategic tools to choose suitable site selection on the coastal region. Geochemical tools and geomorphological survey have been also deployed to identify the suitable site. The geomorphology of the site A reveals enough fresh water accumulation was found and the two elevated crest and the adjacent trough (low land) with surrounding areas further support the fact. The water quality of this site exposes very good quality (< 200ppm TDS) and the dissolved major anions (HCO3, SO4, Cl) and cations (Ca, Mg, Na, K) concentration are well within drinking water standards. The soil samples are of medium to coarse sand nature showing high porosity (40 to 50%) with mica flakes acting as less permeable in nature. The water quality shows very good in nature and similar to Site A. The soil characters additionally proved good in porosity and permeability (SAR 1.5 to 2.1).

Abstract

The damages caused by the tsunami surge of 26, December 2004 could not be recuperated. There is no second opinion for the above statement as attested by the consequences of tsunami surge on the coastal landforms, human lives, properties, biological assets, etc., The attempt made to evaluate the damages caused by the tsunami surge along the study area divulges various factors regarding the response of the coastal environment to this weird phenomenon. Kanyakumari district witnessed the tidal inundation of 50 – 450 m, the least along Colachel and the maximum in Kanyakumari and Muttom coasts. Run-up elevations were seen even up to 6 m in Manakudi and Colachel coasts. In major parts, the beaches of the study area had endured lofty erosion of beach sediments. High occurrence of Casualty was reported in the Coasts of Colachel, Kotilpadu, Manakudi and Azhikkal. Similarly, loss of man-made structures were also observed to be high along the Coast of Manakudi, Colachel, Kotilpadu, Azhikkal and Muttom. Costly articles like boats, fishing nets, etc., were also damaged in Kanyakumari, Pallam, Muttom, Kadiapatanam, Kesavanputhenthurai and Colachel. The quality of water has also been found to be affected with high level of pH and TDS in the coasts of Manakudi and Colachel. Such Colossal damages in the area is attributed to its geo-position exactly at the receiving point of the diverted tsunami surge by Sri Lanka. Bathymetry also seems to have played a crucial role in determining the intensity and angle of the seismic wave propagation in the area.

Keywords: Tsunami, India, Damages in Kanyakumari, Evaluation, Map, GIS.

Abstract

The Car Nicobar Island is one of the several islands in Indian Ocean which was severally damaged by the Great tsunami on 26 December 2004. The great tsunami event caused massive devastation, in the form of loss of life and property in south and south East Asia. The objectives of the study are to assess the changes in the coastal features of the Car Nicobar Island using various indicators such as the tsunami height, run- up elevation, water flow direction, erosion, sand deposition and coastal subsidence. Andaman &Nicobar Islands are the summit of the submarine mountain range lying along the great tectonic suture zone extending from Eastern Himalaya to Sumatra and Lesser Sunda via Myanmar border and Arakan hills. The IRS P-6 satellite data has been found to be very useful in the present tsunami assessment studies. The digital analysis of the satellite data was done using the image processing software (ERDAS IMAGINE 8.4) and DTM to quantify the tsunami height (15 m), run up elevation (2-19 m), inundation (295-1203 m) and coastal responses. The settlements and coconut plantations have been severely damaged in the island, which were assessed using GIS analysis of the pre and post-tsunami satellite data.

Keywords: Tsunami, Wave Height, Run-up Elevation, Inundation, Coastal Responses, Remote Sensing, GIS.

Abstract

The mangrove wetlands form dynamic ecotones between land and sea. Mangrove wetlands are unique in terms of environment, plant and animal communities and their distribution is restricted in tropical and subtropical coastlines. They perform a number of protective and productive functions, which ensures ecological and livelihood security to the coastal communities. The role of mangroves in mitigating the impact of cyclones and storm surges is well known but only limited information is available on their role in reducing the impact of tsunami. The Pichavaram mangroves, located on the southeast coast of India in Tamil Nadu, which was hit by the 26 December 2004 tsunami, provided opportunities to understand the contribution of it in tsunami mitigation. Through a systematic field study, a comparative analysis was made on the impact of tsunami in a set of villages, one was protected by mangroves and the other lacks any vegetation surrounding it. These villages are located at more or less equal distance from the sea and situated at about same elevation. Assessment carried out with well defined indicators such as loss of lives due to forceful entry of tsunami water, damages to houses and types of houses, etc., shows that loss of lives and damage to houses were much less in the village surrounded by Pichavaram mangroves. Thus, Pichavaram mangrove wetland, which was restored with the participation of the local community, Tamil Nadu Forest Department and M.S.Swaminathan Research Foundation (MSSRF) during 1993-2004 provided great dividend during tsunami. This underlines the importance of strengthening the ecological foundation of the coastal zone with mangroves and other vegetation as one of the strategies for mitigating the impact of natural disasters in the coastal areas.

Keywords: Mangroves, Natural Disasters, Tsunami, Impact Reduction and Pichavaram.

Abstract

Cocoa and coffee are highly sought after commodity crops in the market owing to the distinct flavor and aroma characteristics. Cocoa beans are mostly used in the manufacturing of chocolates and various types of confectioneries while coffee is mainly consumed in the form of beverages. Both cocoa and coffee need to be dried and roasted in order to produce the flavor precursors which further develop into the desired flavor and aroma in the finished products. This chapter aims to provide an overview of cocoa and coffee processing with particular emphasis on drying and roasting aspects and its impact on product quality.

Seed germination

It is defined as the emergence and development from the seed embryo, of those essential structures, for the kind of seed in question, indicates its ability to produce a normal plant under favourable conditions. The seedlings devoid of an essential structure; showing weak or unbalanced development; decay or damage affecting the normal development of seedling are not considered in calculating the germination percentage.

An Act to provide for regulating the quality of certain seeds for sale, and for matters connected therewith. It enacted by Parliament in the Seventeenth Year of the Republic of India.

1. Short Title, Extent and Commencement

• This Act may be called the Seeds Act, 1966.
• It extends to the whole of India.
• It shall come into force on such date as the Central Government may, by notification in the Official Gazette, appoint, and different dates may be appointed for different provisions of this Act, and for different States or for different areas thereof.

House plants play an integral role in providing decorative value and aesthetic sense to the place. They are important component of interiorscaping and provides softscape. House plants are also considered as natural air filters as they provide freshness and many house plants are reported to absorb many house pollutants. The demand of house plants are generating many employment opportunities like plant rental services, interiorscaping etc. The house plants are preferred in homes, offices, hospitals, multiplexes etc.

Placement

These attractive house plants rightly deserve their place as interior decorations. “Shade loving” is an adjective often used to describe house plants, but this is a misnomer, Plants may be shade tolerant but they do not actually seek poor light. Diffused light through the glasses or windows’ can be effective you can supplement the suns’ rays with artificial light in the form of a “warm white” fluorescent tube. Then may be shifting them after frequent intervals in the open for a short duration in morning hours to supplement the sunlight during winter months and leaving them out overnight and bringing them after exposing them to early morning sunlight during hot months exposure for a desired time frame in the monsoon are some of the effective methods to make your house plants feel happier.

Abstract

Grain size distribution patterns of five rivers – Hooghly, Bhagirathi, Damodar, Ajoy and the Usri, were critically analyzed and compared with three model distributions: log-normal, log-hyperbolic and log-skew-Laplace. The log-normal and log-skew-Laplace are the limiting distributions of log-hyperbolic family. The Hooghly-Bhagirathi river system from where the sand samples were collected is tidal in nature whereas the other three rivers are non-tidal. The tidal effect on grain size distribution patterns was also studied. Bed load samples were collected from the foreset of different bedform sizes. A total number of 126 sediment samples were collected from different sections of the rivers under study.

It is observed that the grain size distribution pattern of the tidal stretch of the Hooghly-Bhagirathi river system has a tendency of attaining a log-skew-Laplace distribution model whereas the other three non-tidal river sediments show a clear log-normal distribution pattern as a best-fit statistical model.

A possible reason has been attributed. During prolonged transport of bed material, the coarser and finer sediments are separated in the following manner: coarser sediments are buried below the advancing ripple fronts whereas the finer sediments are transported further downstream as suspension load. As a result, sediments of a narrow range of size classes are active in the distribution pattern giving rise to symmetric and unimodal distribution patterns which are the main criteria of log-normality. On the other hand, due to the upstream and downstream movement during sediment transportation in tidal reaches, the same sediments are constantly reworked and the segregation of different size fractions is hindered causing a log-skew-Laplace distribution pattern.

Pesticide Formulation

Pesticide formulation is the process by which the pesticide is put into a form which can be easily produced, stored, transported and applied by practical methods in order to achieve a safe, convenient economic and effective method of pest control.

When a pesticide active ingredient (a.i) is manufactured, it is not in a usable form as it may not mix well with water or may be unstable. Therefore, it is mixed with other compounds to improve its effectiveness, safety, handling and storage. These other compounds can include solvents, mineral clays, stickers, wetting agents, or other adjuvant. The mixture of a.i. and inert (inactive) ingredients is called a pesticide formulation. Some formulations are premixed while others must be mixed before use. A single a.i. is often made into several formulations.

Introduction

Humans are able to live and work in almost all the environmental extremes of the planet earth and also in space due to their remarkable physiological adaptability and/or by modification of environment itself. Adequate nutrition plays a key role in adaptation and accordingly nutritional needs vary to a great extent. Nutraceutical, a term combining the words “nutrition” and “pharmaceutical”, is a food or food product that provides health and medical benefits, including the prevention and treatment of disease. Such products may range from isolated nutrients, dietary supplements and specific diets to genetically engineered foods, herbal products, and processed foods such as cereals, soups, and beverages. Nutraceutical is a broad umbrella term used to describe any product derived from food sources that provides extra health benefits in addition to the basic nutritional value found in foods. Products typically claim to prevent chronic diseases, improve health, delay the aging process, and increase life expectancy. Phytochemical profile in important crops such as ber, aonla, pomegranate, date palm, karoda, bael, aloe vera, cactus pear of arid region have been indicated that there is wide variation among primary and secondary metabolites. Thus it has become imperative to look into markers linked to high contents of bioactive compounds rather than size and sweetness of the fruits during exploration and evaluation of the plant germplasm.

Introduction

Cactus pear belongs to Cactaceae family, is widely grown in Mexico and distributed in arid and semi arid tracts of several other parts of the world, such as Australia, Africa, USA and the Mediterranean basin and South East Asia. The future of arid and semi-arid areas of the World largely depends on the development of sustainable agricultural systems based on the use of appropriate crops. Suitable crops are those that successfully cope with water shortage, high temperature, variabilities, poor soils, and easy management to provide food and forage to poor farmers and herders. Opuntias fit most of the above described requirements. In addition, Opuntias play an important ecological role in combating desertification as well as producing fruits and vegetables for human consumption, forage or fodder for livestock, biomass for energy purposes, cochineal for carmine production, and numerous by-products (beverages, vegetarian cheese, drugs and cosmetics). They also provide shelter and food for various wildlife species in arid environments. The fruit known as tuna is a fleshy berry, varying in shape, size, and colour and has a consistent number of hard seeds. The fairly high sugar content and low acidity of the fruit makes it palatable and delicious. Cactus pear was largely treated as underutilized crop by the scientific world until the beginning of 1980, when there was a multiplication of research and symposia, resulting in a large number of publications, including books and book chapters. Recent research finding has, in fact, revealed the high content of some chemical constituents, which can give added value to this crop on a nutritional and bioactive profile. High levels of betalains, taurine, calcium, magnesium, and antioxidants are nutraceutically important. Moreover, some of the constituents show promising in terms of health beneficial quality. Cactus pear products could supplement to nutritional security and human health. The diverse genotypes of Cactus pear have different coloured fruit that show the presence of different antioxidants profiles.

An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group –COOH. However, sulphuric acids, containing the group –SO₂OH, are relatively stronger acids. Alcohols, with –OH, may also act as weak acids. Some other groups may also act as weak acids viz. thiol group and phenol group. In biological systems, organic compounds containing these groups are generally classified under organic acids. Some common organic acids are lactic acid, acetic acid, formic acid, citric acid, oxalic acid, uric acid, propionic acid and butyric acid. Organic acids have been used for decades in commercial compound feeds, mostly for feed preservation, for which formic and propionic acids are particularly effective. Since the ban of antibiotic growth promoters in many countries, organic acids have been used increasingly, not only because of their preservative qualities, but also for their nutritive properties. Organic acids and their salts are generally regarded as safe and have been approved by most member states of EU to be used as the feed additives in animal production.

Archaeobotany

Botany as far as it is relevant in archaeology mainly denotes all types of ancient organic material (in particular ancient plant remains) collected from excavation sites. The deliberate study of the interrelationship between humans and plants and the environmental context in which this occurred has been called archaeobotany.

Flowers are highly perishable unlike other horticultural or agricultural crops. Owing to poor keeping quality the post harvest losses in floriculture are significantly higher than any other sector. Although there has been significant increase in the area, production and productivity of flower crops in the last two decades, there is an urgent need to minimize the huge post harvest losses in terms of the value of the produce which are estimated to be 30-40 per cent of farm value. The post harvest behavior of flowers is an outcome of the physiological processes, occurring in leave, stem, flower bud, leafless peduncle or scape connecting bud to the stem. Some of these processes may act independently to affect the senescence and vase life of cut flowers but most of them are inter-related. The nature and extent of post harvest damage is typical for each crop or cultivar. The post harvest losses become important especially when dealing with the export of fresh flowers to distant and foreign market. Therefore, patient, soft and expert handling of flowers is of utmost importance after harvest.

Preservation means just protect the foods against the spoilage, but scientifically it may be defined as a science which deals with the process for prevention of decay or spoilage of the food is called preservation.

In other words, just controlling the physical, chemical or microbial changes in the foods is called preservation.

Physical Changes: Colour, flavour, texture and taste etc.

Chemical Changes: Carbohydrate, fats, proteins, vitamins and minerals.

Microbial Changes: Mould, yeasts and bacteria

A. ICAR Agricultural Institutes

• Central Agricultural Research Institute (CARI), Post Box No. 181. Andaman Nicobar & Lakshwadeep Group of Islands, Port Blair.
• Central Arid Zone Research Institute (CAZRI), Jodhpur, (Rajasthan). Website: www.icar.org.in (Rajasthan).
• Central Avian Research Institute (CARI), Izatnagar, (Uttar Pradesh)
• Central Inland Fisheries Research Institute (CIFRI), Barrackpore (West Bengal). Web site: www.cifri.com.
• Central Institute for Cotton Research (CICR), P.O. No. 225, G.P.O., Panjari, Wardha Road, Nagpur (Maharashtra).
• Central Institute for Freshwater Aquaculture (CIFA), P.O. Kausalyaganga, Bhubaneshwar (Orissa).

ABSTRACT

In the present investigation on three different plant species from pollution and control area were carried act for biochemical analysis such as total chlorophyll content, leaf extract pH, relative water content and ascorbic acid test. The results indicate accordance to order of tolerance index of plant species in air pollution are Macrosolen cochinchinensis, Loranthus parasiticus and Viscum album. The changes in pollution tolerance index are biochemically induced due to the surrounding environmental conditions. Thus, it is observed that Macrosolen cochinchinensis is highly tolerant species among the selected three species. Thus, in future this plant species may play an important role in pollution indicator. APTI analysis show the pollution tolerating decreasing order for there species can be Macrosolen cochinchinensis> Loranthus parasiticus>Viscum album and as ascorbic acid result indicate that Macrosolen cochinchinensis show mostly defence mechanism and highly tolerance level against different kind of pollutant. Besides these three hemiparasite plant species have some valuable ethnomedicinal important. In India tribal people used leaf and stem bark in curing abortion, miscarriage, vaginal bleeding during pregnancy, treat circulatory and respiratory system problems.

An overwhelming proportion of plant material used for compounding herbal medicines and nutraceuticals is currently collected from the wild. With traditional health care systems gaining increasing popularity, the enormous amount of plant material extracted from the limited plant populations available in natural stands is a cause of justifiable alarm. The unscrupulous plunder of plant populations growing in the wild is pushing increasing number of important species to the endangered category and many to the verge of extinction. Also, unethical practices like adulteration and storage of medicinal plants under unacceptable conditions are rampant. All this is happening, when the consumer is becoming increasingly quality conscious and is demanding traceability of source material used for formulations and adherence to good practices for the entire chain of manufacturing process for herbal drugs and plant-based nutraceuticals. Clearly, solution to this problem lies in replacing the ‘collection from the wild ’ paradigm to ‘production by cultivation ’. An essential prerequisite for meeting this objective is a well thought out research agenda which not only tackles productivity enhancement goals for the targeted plant species but also addresses the validity of the entrenched notion among healers who use the traditional medical systems, that only material collected from the wild produces the desired results. The reason advanced in support of this argument is that phytomedicines are derived from plant populations growing in the wild under organic conditions and under their natural rhizosphere and rhizoplane. The associated soil-microbial complexes, and a variety of endophytic microorganisms, may be the initiators or modifiers of the production and expression of medicinal properties.

It also so happens that a majority of medicinal plants are shade loving, C4 types and will necessarily require their species-specific ambient environment for elicitation of the medicinally relevant moities.

1. Introduction

The objective of algal taxonomic collections is to represent the natural population, flora and diversity in size and form. Therefore, it is important to collect the representative samples seasonally from various habitats. Collection of information about the habitats and other details are also very important. For algal sampling the first thing to consider is how to collect the specimens. The freshwater algae show an ability to tolerate a wide range of environmental condition. Under natural conditions, they usually grow in mixed communities which may include many species and genera. Field study provides information about the site, environment, season and size and shape of the living algal thallus in its natural surroundings. Many algae can be tentatively identified by their appearance, shape and colour of thallus in a particular habitat. Algal population can be sampled in a number of different ways, depending on the nature of the habitat and the location of the algae within the water body. The specimens must be prepared carefully so that important morphological characters are displayed as fully and completely for further researches.

1. Introduction

Pteridophytes consist of ferns and their allies and are one of the oldest groups of plants on the earth, and they are commonly known as vascular cryptogams. Pteridophytes have a long history of evolution and were the dominant group of plants during the carboniferous period. The ferns, which constitute major element of the pteridophytes, preferentially grow in shade, moist habitats with moderate temperature but also occur throughout from high altitude in arctic-alpine to rain forests of tropic regions of the world. The most favoured habitat of these plants, however, is tropical mesic environment, where 65% of the living species of fernsthrive vigorously and grow luxuriantly (Page, 1979). Ferns are distinct in having rhizomes, stipes, fronds and are homosporous, whereas the fern allies exhibit scale like leaves and are heterosporous (mega and micro). In ferns, the spore matures into gametophyte that bears both male and female gametangia in a definite pattern. In fern allies, both the mega and microspore mature into female and male gametophyte that bears female and male gametangia, respectively. Pteridophytes are unique in having two different phases-the gametophyte and sporophyte. There has been a wide range of variation in spatial distribution, habitat, growth pattern and morphology of pteridophytes. Fern and fern allies, are comprised of six distantly related classes viz. Lycopodiopsida, Selaginellopsida, Isoetopsida, Equisetopsida, Psiloptopsida and Polypodiopsida (Copeland 1947; Pichi Sermoli 1987).

There are about 12000 species of the pteridophytes belonging to 300 genera in the world, whereas India is represented by about 1200 species (Chandra, 2000). Beddome (1892) during the first quarter of the twentieth century provided a comprehensive account on ferns of British India, and subsequently, Clarke (1880) and Hope (1899, 1900, 1902, 1903, 1904) made significant contributions in taxonomic studies of pteridophytes mainly the ferns of north western India. Several workers (Nayar and Kaur 1974; Dixit 1984; Chandra and Kaur 1987, 1994; Manickam et al. 1992; Khullar 1994, 2000; Chandra 2000; Singh 2003; Singh and Panigrahi 2005a, 2005b) have significantly contributed towards the taxonomy of Indian pteridophytes.

1. Introduction

Biological systematics (biosystematics) deals with the grouping of biological organisms in discrete taxonomic units based on their character states. These character states are determined through morphological, anatomical, ecological, biochemical and molecular biological analyses of specific parameters. If these character states are converted into numerical parameters, we can apply several statistical and numerical methods to achieve appropriate biosystematic inferences. In fact this particular application of statistical and numerical methods has given rise to what we may describe as Numerical Taxonomy, a concept first developed by Robert R. Sokal and Peter H. A. Sneath nearly a half century ago. In recent years the application of numerical methods to taxonomy has received a great deal of attention with the development of the computer and computer technology to the extent that even classical taxonomists are now resorting to the use of such numerical taxonomy methods with the help of computers. In this article the various methods commonly used, their application and specific limitations or otherwise are discussed in the context of their usefulness for classification and taxonomic disposition of the plants.

Chromatography is an important analytical technique for the separation, isolation and identification of the constituents of a mixture. It is a physical method of separation in which the components to be separated are distributed between two phases; one of these phases consisting a stationary bed of large surface area, the other being a fluid that percolates through or along the stationary bed. All forms of chromatography do have the common features given in this definition. All of them involve the physical movements of the sample across a flat surface (tube like) or through a tube. The stationary phases in all of these possess a large surface area. In all the techniques, the movement of the sample is due to the motion of the fluid/mobile phase. The principle underlying all these methods is the selective retardation of the movement of the components by the stationary phase. These methods result in the production of bands of concentrated components. The basis of naming various chromatographic methods are different:

Meat is an animal flesh that is used as food. Most often, this means the skeletal muscle and associated fat but it may also describe other edible tissues such as organs, livers, skin, brains, bone marrow, kidneys or lungs. Meat is highly nutritious food because it contains protein, fat and carbohydrates in relative proportion, supply energy as required by the human body, posses ability to build or replace tissues and the substances present in meat are easily absorbed by the human body. Meat is also a good source of B-complex vitamins but fat soluble vitamins are low in meat. It is a good source of phosphorous, zinc and iron but low in calcium. Meat also contains significant amount of copper, sodium, potassium and magnesium but low in carbohydrate contents. Carbohydrate is found mainly in form of glycogen which disappears completely after completion of rigor mortis. In general lean red meat is particularly good source of protein, niacin, vitamin B6, vitamin B12, phosphorus, zinc and iron. About 100g of meat can provide more than 25% RDI of these nutrients. It also provides more than 10% RDI of riboflavin, pantothenic acid and selenium. Of the four meats, mutton is particularly nutrient-dense and the richest source of thiamine.

Ageing of meat is also known as conditioning or tenderising or ripening or maturing and sometime resolution of rigor. It is a process of holding unprocessed meat above freezing point under controlled conditions. By this process we can make muscle soft and pliable thus meat becomes tender. When we keep the meat above freezing point at temperature between 0-3ºC then all those changes occurs which are normally occurs at higher temperature i.e. atmospheric oxidation and enzymatic action of fat, bacterial action etc. When this temperature range becomes below freezing point then it inhibits completely the enzymatic action in the muscles. Ageing is required for marked increase in flavour, juiciness and tenderness of meat. In this process action of enzymes in meat plays key role while bacterial action is not of any importance. Meat tenderness and taste are definitely improved if carcasses or vacuum packed cuts are conditioned after slaughter but paradoxically beef is quite tender just two hours after slaughter and several days of conditioning are required to recover this degree of tenderness.

During the contraction of muscles, thick and thin filaments sliding to each other and decreases the length of sarcomeres. In turn, this decreases the length of fibrils, fibres and the whole muscle. If these muscles remain in contracted length when rigor develops, it causes massive overlap of thick and thin filaments leading to severe meat toughness. It is also necessary to avoid the cooling of meat too rapidly after slaughter, otherwise it cold-shortens and gets tough. If we avoid cold-shortening of muscles during conditioning, it will increase meat tenderness. But with too much conditioning, weight loss, surface spoilage and the cost of refrigerated storage increases.

Ageing of carcasses with little or no fat cover is not recommended by meat specialists. Because these carcasses loose moisture rapidly, loose weight excessively and discolour the meat surface rapidly. In addition, lean meat is also susceptible to deterioration through microbial growth, slime formation by bacteria and mould growth etc. Ageing is important for beef and buffalo meat while pork and lamb do not require ageing because they are slaughtered in the age where they are young and inherently tender. Additionally, the unsaturated fats found in pork fat oxidize during ageing causes rancidity and off flavour. Veal has very little protective fat covering and is high in moisture; thus it does not lend itself to ageing.

Climate change mitigation is urgent, and adaptation to climate change is crucial, particularly in agriculture, where food security is at stake. The gases contributing to the greenhouse effect mainly include carbon dioxide (CO₂), nitrous oxide (N₂O) and methane (CH₄). These gases have varying global warming potentials, which can be expressed in CO₂ equivalents.

Agriculture, currently responsible for 2030% of global greenhouse gas emissions (counting direct and indirect agricultural emissions), can however contribute to both climate change mitigation and adaptation. The main mitigation potential lies in the capacity of agricultural soils to sequester CO₂ through building organic matter. This potential can be realized by employing sustainable agricultural practices, such as those commonly found within organic farming systems. Examples of these practices are the use of organic fertilizers and crop rotations including legume leys and cover crops. Mitigation is also achieved in organic agriculture through the avoidance of open biomass burning, and the avoidance of synthetic fertilizers, the production of which causes emissions from fossil fuel use.

Organic agriculture is associated with higher carbon sequestration as many organic practices help to improve soilquality and carbon sequestration. The most common organic practices that increase soil organic carbon are the use of organic fertilizers (such as the composted waste products from livestock husbandry), crop rotation involving legumes and the planting of cover crops.

Organic farming offers several ways to mitigate climate change when compared to conventional agriculture:

Primarily, organic farming, through its key practices of organic fertiliser use and crop rotations with forage legumes, tends to increase soil organic carbon levels resulting in carbon sequestration.This contributes to climate change mitigation, as it absorbs CO₂ from the atmosphere and stores the additional carbon in the soil. However, depending on soil type and climatic conditions, this process usually comes to a halt after some decades, when soil organic carbon levels have reached a new equilibrium and soils arethus saturated with respect to organic carboncontents. Furthermore, this storage of organiccarbon is reversible and the carbon can again be released into the atmosphere as carbon dioxide when switching to unsustainable practices.

1. INTRODUCTION

Fruit production is not only the growing of fruit plants but it is an outcome of well planned orcharding system. The designing of an orchard for successful fruit production depends upon various physical as well as climatic conditions and resources which help in building up of fruit growing systems. An orchard is a long term investment, mistakes committed at initial stage of planning, selection of site and soil reduces the return greatly from investment, beside wastage of time and energy. Thus, a faultless planning with utmost care and attention become quite imperative while planning a new orchard.

2. PLANNING OF ORCHARD

Before undertaking the actual planting of fruit trees, it is advisable to plan the complete process/steps, which will enable the grower to provide not only the most economic orchard management, but also for the economic layout and location of roads, drains, irrigation channels, hedges and wind breaks. For establishing an orchard of fruits, the major consideration must be given to four important aspects like climate, site or location selection, soil condition and basic facilities (economic and market consideration).

1. INTRODUCTION

Nursery management is the backbone of fruit industry. The nurseries will have to play vital role in planned work for increasing the area under orchard. They are indeed the hub on which the success of an orchard depends. It provides continuous supply of healthy and certified planting material. So, one should give utmost attention while raising fruit plants.

The fruit plants are the foundation on which an orchard is built. If the plants are reliable and of guaranted performance, they will be high yielding and will produce quality fruits. There are many nurserymen in several fruit belts of the country who multiply thousands of fruit plants vegetatively for sale. It is desirable to raise only reliable, true-to-type, disease resistant and vigorous and precocious plants in order to have success in the fruit development programme in the country. At present there are several research stations and progeny- cum-demonstration orchards, Govt nurseries and also private registered nurseries engaged in the propagation of fruit plants.

Stone fruits like peaches, plums, apricots, almonds and cherries liked by one and all throughout the world for its colour, taste and nutritional value and grown in all part of the temperate zone and lower hill area of the country. The common procedure to raise nursery trees is to grow rootstocks from seeds or cuttings and then to bud known suitable varieties upon them. The stone fruits do not come true- to-type when raised from seed and therefore, nursery plants are generally raised through vegetative methods of propagation either on their own roots by cuttings or layering techniques or on the roots of other plants (rootstocks) by budding and grafting techniques. Rootstocks play an important role in quality fruit production. The stone fruits are generally propagated on rootstocks rather than on their own roots to have an advantage of rootstocks, like growth control, precocity, cropping and resistance to insect-pest and diseases.

1. INTRODUCTION

Vegetables differ widely from field crops in their requirements for land preparation and cultural practices because of their differences in their morphologies, growth habit, and socio-economic values. In preparing land for vegetable production, ecological location, mode of cropping, season, crop disposition and the type of vegetables to be grown are taken into consideration.

Clearing: It is often necessary to remove the vegetation cover when a piece of land is to be used for vegetable production. The land clearing methods may involve removing the remains of previous crops and undergrowth, cutting back the woody shrubs and trees and burning them.

Levelling: When the site has been cleared, uneven land may have to be leveled. This facilitates the process of ploughing, harrowing ridging and layout of the site.

Land preparation and layout depend on

I. INTRODUCTION

Horticultural crops include fruits, vegetables, flowers, plantation crops, spices, and medicinal and aromatic plants have emerged as a major economic activity in India. It contributes 30% GDP from 11.73 % of its arable land area. Horticulture crops cover over 23.4 million hectares of area, which is approximately 12.7% of the total gross cropped area of the country and contributes 18-20% of the gross value of India’s agricultural output (NHB, 2013). India is the world’s second largest fruit and vegetable producing country accounting for 77.7 million metric tonnes of fruit and 159.5m M tonnes of vegetables (NHB, 2013). Besides, about 5.66 million tonnes of loose flowers, spices, mushroom and aromatic plants are also produced. The country produces 41% of world mangoes, 23% banana, 24% cashew nut, 36% green peas, 10% onion and 30% cauliflower and accounts for 12% of world fruit and 13.25% of vegetable production (NHB, 2013). Owing to wide diversity of agro climatic conditions, almost all types of temperate (apple, peach, plum, apricot, cherries and nuts), subtropical (mango, guava, papaya, etc), tropical (banana, pineapple etc), arid fruit (ber and aonla), plantation crops (coconut, cashewnut and arecanut) and diverse variety of vegetables are grown in India. The export of fresh fruit and vegetables from India in 2006-07 was estimated at 9.84 Lakh tonnes valued at Rs 2411.70 crores. Mango, grapes, apple, onion, potato, green vegetables like okra, bitter gourd and green chillies were the major items of export. Similarly, India exported 5.97 Lakh tonnes of processed foods comprising of mango pulp, juices, concentrates, dried and processed vegetables, pickle and chutney, alcoholic and non-alcoholic beverages worth Rs 2818.1 crores (APEDA, 2012) (Table 1 to 3).

1. INTRODUCTION

Quality, i.e. the degree of excellence or superiority, is a combination of attributes, properties, or characteristics that each commodity value in of human food. The relative importance of each quality component depends upon the commodity and its intended use (e.g. fresh or processed) and varies among producers, handlers, and consumers. Appearance of quality, firmness and shelf-life are important from the point of view of wholesale and retail marketers. Consumers judge quality of fresh fruits and vegetables on the basis of appearance and firmness, flavour (eating) quality of the product. Consumers are also concerned about the nutritional quality and safety of fresh fruit and vegetables.

1. TERMS RELATED WITH BROWNING

1. INTRODUCTION

Food is constantly being rated for its quality either consciously or subconsciously by all people. Consumers choose food on the basis of its quality and their individual likes or dislikes. The attractiveness of food is clearly a quality which is important both to the manufacturer and to the consumer. When consumers make a selection they basically look for food that is attractive in terms of colour, flavour and texture apart from other psychological and social factors, which they may associate with food. The nutritional quality, shelf-life/keeping quality and cost factor are other criteria which may affect their selection.

The distinctive and attractive colour of food is not only pleasing but is also an indicator of good quality and freshness. The senses of taste and odour help us in detecting and appreciating different flavours and deciding on whether we like the food. The feel and texture of food entering the mouth should be firm, juicy, crisp and are extremely important characteristics that dictate the acceptance of a food. Today’s consumers are discerning, demanding, and more knowledgeable about food. They expect safe products having good value and high sensory quality. Therefore, knowing consumer’s preferences and perceptions of the sensory characteristics of food and beverage products is vital to food manufacturers. Without appropriate evaluation, there is a high risk of market failure.

Eswaran (2007) made graphic analysis with the model proposed by Jinks and Hayman (1953). He evolved 30 hybrids from six parents in a diallel fashion. The results are presented in Tables 71-74

Among the different biometrical methods available, triple test cross analysis is one of the most efficient designs currently available for investigating the genetic structure of populations. It provides a test of epistasis and in its absence it gives independent and equally precise estimates of additive and dominance genetic components (Mather and Jinks, 1982).

11.1. Statistical analysis

Triple test cross

Jinks and Perkins (1970) method was applied to detect epistasis and estimate additive and dominance components of genetic variance.